Adding upstream version 18.2.2.upstream/18.2.2

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 292 insertions, 0 deletions

diff --git a/src/spdk/test/nvmf/common.sh b/src/spdk/test/nvmf/common.sh
new file mode 100644
index 000000000..5f52ef127
--- /dev/null
+++ b/src/spdk/test/nvmf/common.sh
@@ -0,0 +1,292 @@
+NVMF_PORT=4420
+NVMF_IP_PREFIX="192.168.100"
+NVMF_IP_LEAST_ADDR=8
+NVMF_TCP_IP_ADDRESS="127.0.0.1"
+NVMF_TRANSPORT_OPTS=""
+NVMF_SERIAL=SPDK00000000000001
+
+function build_nvmf_app_args() {
+	if [ $SPDK_RUN_NON_ROOT -eq 1 ]; then
+		NVMF_APP=(sudo -u "$USER" "${NVMF_APP[@]}")
+		NVMF_APP+=(-i "$NVMF_APP_SHM_ID" -e 0xFFFF)
+	else
+		NVMF_APP+=(-i "$NVMF_APP_SHM_ID" -e 0xFFFF)
+	fi
+}
+
+: ${NVMF_APP_SHM_ID="0"}
+export NVMF_APP_SHM_ID
+build_nvmf_app_args
+
+have_pci_nics=0
+
+function rxe_cfg() {
+	"$rootdir/scripts/rxe_cfg_small.sh" "$@"
+}
+
+function load_ib_rdma_modules() {
+	if [ $(uname) != Linux ]; then
+		return 0
+	fi
+
+	modprobe ib_cm
+	modprobe ib_core
+	# Newer kernels do not have the ib_ucm module
+	modprobe ib_ucm || true
+	modprobe ib_umad
+	modprobe ib_uverbs
+	modprobe iw_cm
+	modprobe rdma_cm
+	modprobe rdma_ucm
+}
+
+function detect_soft_roce_nics() {
+	rxe_cfg start
+}
+
+# args 1 and 2 represent the grep filters for finding our NICS.
+# subsequent args are all drivers that should be loaded if we find these NICs.
+# Those drivers should be supplied in the correct order.
+function detect_nics_and_probe_drivers() {
+	NIC_VENDOR="$1"
+	NIC_CLASS="$2"
+
+	nvmf_nic_bdfs=$(lspci | grep Ethernet | grep "$NIC_VENDOR" | grep "$NIC_CLASS" | awk -F ' ' '{print "0000:"$1}')
+
+	if [ -z "$nvmf_nic_bdfs" ]; then
+		return 0
+	fi
+
+	have_pci_nics=1
+	if [ $# -ge 2 ]; then
+		# shift out the first two positional arguments.
+		shift 2
+		# Iterate through the remaining arguments.
+		for i; do
+			modprobe "$i"
+		done
+	fi
+}
+
+function detect_pci_nics() {
+
+	if ! hash lspci; then
+		return 0
+	fi
+
+	detect_nics_and_probe_drivers "Mellanox" "ConnectX-4" "mlx4_core" "mlx4_ib" "mlx4_en"
+	detect_nics_and_probe_drivers "Mellanox" "ConnectX-5" "mlx5_core" "mlx5_ib"
+	detect_nics_and_probe_drivers "Intel" "X722" "i40e" "i40iw"
+	detect_nics_and_probe_drivers "Chelsio" "Unified Wire" "cxgb4" "iw_cxgb4"
+
+	if [ "$have_pci_nics" -eq "0" ]; then
+		return 0
+	fi
+
+	# Provide time for drivers to properly load.
+	sleep 5
+}
+
+function detect_rdma_nics() {
+	detect_pci_nics
+	if [ "$have_pci_nics" -eq "0" ]; then
+		detect_soft_roce_nics
+	fi
+}
+
+function allocate_nic_ips() {
+	((count = NVMF_IP_LEAST_ADDR))
+	for nic_name in $(get_rdma_if_list); do
+		ip="$(get_ip_address $nic_name)"
+		if [ -z $ip ]; then
+			ip addr add $NVMF_IP_PREFIX.$count/24 dev $nic_name
+			ip link set $nic_name up
+			((count = count + 1))
+		fi
+		# dump configuration for debug log
+		ip addr show $nic_name
+	done
+}
+
+function get_available_rdma_ips() {
+	for nic_name in $(get_rdma_if_list); do
+		get_ip_address $nic_name
+	done
+}
+
+function get_rdma_if_list() {
+	for nic_type in /sys/class/infiniband/*; do
+		[[ -e "$nic_type" ]] || break
+		for nic_name in /sys/class/infiniband/"$(basename ${nic_type})"/device/net/*; do
+			[[ -e "$nic_name" ]] || break
+			basename "$nic_name"
+		done
+	done
+}
+
+function get_ip_address() {
+	interface=$1
+	ip -o -4 addr show $interface | awk '{print $4}' | cut -d"/" -f1
+}
+
+function nvmfcleanup() {
+	sync
+	set +e
+	for i in {1..20}; do
+		modprobe -v -r nvme-$TEST_TRANSPORT
+		if modprobe -v -r nvme-fabrics; then
+			set -e
+			return 0
+		fi
+		sleep 1
+	done
+	set -e
+
+	# So far unable to remove the kernel modules. Try
+	# one more time and let it fail.
+	# Allow the transport module to fail for now. See Jim's comment
+	# about the nvme-tcp module below.
+	modprobe -v -r nvme-$TEST_TRANSPORT || true
+	modprobe -v -r nvme-fabrics
+}
+
+function nvmftestinit() {
+	if [ -z $TEST_TRANSPORT ]; then
+		echo "transport not specified - use --transport= to specify"
+		return 1
+	fi
+	if [ "$TEST_MODE" == "iso" ]; then
+		$rootdir/scripts/setup.sh
+		if [ "$TEST_TRANSPORT" == "rdma" ]; then
+			rdma_device_init
+		fi
+	fi
+
+	NVMF_TRANSPORT_OPTS="-t $TEST_TRANSPORT"
+	if [ "$TEST_TRANSPORT" == "rdma" ]; then
+		RDMA_IP_LIST=$(get_available_rdma_ips)
+		NVMF_FIRST_TARGET_IP=$(echo "$RDMA_IP_LIST" | head -n 1)
+		NVMF_SECOND_TARGET_IP=$(echo "$RDMA_IP_LIST" | tail -n +2 | head -n 1)
+		if [ -z $NVMF_FIRST_TARGET_IP ]; then
+			echo "no NIC for nvmf test"
+			exit 0
+		fi
+	elif [ "$TEST_TRANSPORT" == "tcp" ]; then
+		NVMF_FIRST_TARGET_IP=127.0.0.1
+		NVMF_TRANSPORT_OPTS="$NVMF_TRANSPORT_OPTS -o"
+	fi
+
+	# currently we run the host/perf test for TCP even on systems without kernel nvme-tcp
+	#  support; that's fine since the host/perf test uses the SPDK initiator
+	# maybe later we will enforce modprobe to succeed once we have systems in the test pool
+	#  with nvme-tcp kernel support - but until then let this pass so we can still run the
+	#  host/perf test with the tcp transport
+	modprobe nvme-$TEST_TRANSPORT || true
+}
+
+function nvmfappstart() {
+	timing_enter start_nvmf_tgt
+	"${NVMF_APP[@]}" "$@" &
+	nvmfpid=$!
+	trap 'process_shm --id $NVMF_APP_SHM_ID; nvmftestfini; exit 1' SIGINT SIGTERM EXIT
+	waitforlisten $nvmfpid
+	timing_exit start_nvmf_tgt
+}
+
+function nvmftestfini() {
+	nvmfcleanup || :
+	if [ -n "$nvmfpid" ]; then
+		killprocess $nvmfpid
+	fi
+	if [ "$TEST_MODE" == "iso" ]; then
+		$rootdir/scripts/setup.sh reset
+		if [ "$TEST_TRANSPORT" == "rdma" ]; then
+			rdma_device_init
+		fi
+	fi
+}
+
+function rdma_device_init() {
+	load_ib_rdma_modules
+	detect_rdma_nics
+	allocate_nic_ips
+}
+
+function revert_soft_roce() {
+	rxe_cfg stop
+}
+
+function check_ip_is_soft_roce() {
+	rxe_cfg status rxe | grep -wq "$1"
+}
+
+function nvme_connect() {
+	local init_count
+	init_count=$(nvme list | wc -l)
+
+	if ! nvme connect "$@"; then return $?; fi
+
+	for i in $(seq 1 10); do
+		if [ $(nvme list | wc -l) -gt $init_count ]; then
+			return 0
+		else
+			sleep 1s
+		fi
+	done
+	return 1
+}
+
+function get_nvme_devs() {
+	local dev rest
+
+	nvmes=()
+	while read -r dev rest; do
+		if [[ $dev == /dev/nvme* ]]; then
+			nvmes+=("$dev")
+		fi
+		if [[ $1 == print ]]; then
+			echo "$dev $rest"
+		fi
+	done < <(nvme list)
+	((${#nvmes[@]})) || return 1
+	echo "${#nvmes[@]}" >&2
+}
+
+function gen_nvmf_target_json() {
+	local subsystem config=()
+
+	for subsystem in "${@:-1}"; do
+		config+=(
+			"$(
+				cat <<- EOF
+					{
+					  "params": {
+					    "name": "Nvme$subsystem",
+					    "trtype": "$TEST_TRANSPORT",
+					    "traddr": "$NVMF_FIRST_TARGET_IP",
+					    "adrfam": "ipv4",
+					    "trsvcid": "$NVMF_PORT",
+					    "subnqn": "nqn.2016-06.io.spdk:cnode$subsystem"
+					  },
+					  "method": "bdev_nvme_attach_controller"
+					}
+				EOF
+			)"
+		)
+	done
+	jq . <<- JSON
+		{
+		  "subsystems": [
+		    {
+		      "subsystem": "bdev",
+		      "config": [
+		        $(
+		IFS=","
+		printf '%s\n' "${config[*]}"
+		)
+		      ]
+		    }
+		  ]
+		}
+	JSON
+}