diff options
Diffstat (limited to 'doc/cephadm/services/osd.rst')
-rw-r--r-- | doc/cephadm/services/osd.rst | 997 |
1 files changed, 997 insertions, 0 deletions
diff --git a/doc/cephadm/services/osd.rst b/doc/cephadm/services/osd.rst new file mode 100644 index 000000000..f62b0f831 --- /dev/null +++ b/doc/cephadm/services/osd.rst @@ -0,0 +1,997 @@ +*********** +OSD Service +*********** +.. _device management: ../rados/operations/devices +.. _libstoragemgmt: https://github.com/libstorage/libstoragemgmt + +List Devices +============ + +``ceph-volume`` scans each host in the cluster from time to time in order +to determine which devices are present and whether they are eligible to be +used as OSDs. + +To print a list of devices discovered by ``cephadm``, run this command: + +.. prompt:: bash # + + ceph orch device ls [--hostname=...] [--wide] [--refresh] + +Example:: + + Hostname Path Type Serial Size Health Ident Fault Available + srv-01 /dev/sdb hdd 15P0A0YFFRD6 300G Unknown N/A N/A No + srv-01 /dev/sdc hdd 15R0A08WFRD6 300G Unknown N/A N/A No + srv-01 /dev/sdd hdd 15R0A07DFRD6 300G Unknown N/A N/A No + srv-01 /dev/sde hdd 15P0A0QDFRD6 300G Unknown N/A N/A No + srv-02 /dev/sdb hdd 15R0A033FRD6 300G Unknown N/A N/A No + srv-02 /dev/sdc hdd 15R0A05XFRD6 300G Unknown N/A N/A No + srv-02 /dev/sde hdd 15R0A0ANFRD6 300G Unknown N/A N/A No + srv-02 /dev/sdf hdd 15R0A06EFRD6 300G Unknown N/A N/A No + srv-03 /dev/sdb hdd 15R0A0OGFRD6 300G Unknown N/A N/A No + srv-03 /dev/sdc hdd 15R0A0P7FRD6 300G Unknown N/A N/A No + srv-03 /dev/sdd hdd 15R0A0O7FRD6 300G Unknown N/A N/A No + +Using the ``--wide`` option provides all details relating to the device, +including any reasons that the device might not be eligible for use as an OSD. + +In the above example you can see fields named "Health", "Ident", and "Fault". +This information is provided by integration with `libstoragemgmt`_. By default, +this integration is disabled (because `libstoragemgmt`_ may not be 100% +compatible with your hardware). To make ``cephadm`` include these fields, +enable cephadm's "enhanced device scan" option as follows; + +.. prompt:: bash # + + ceph config set mgr mgr/cephadm/device_enhanced_scan true + +.. warning:: + Although the libstoragemgmt library performs standard SCSI inquiry calls, + there is no guarantee that your firmware fully implements these standards. + This can lead to erratic behaviour and even bus resets on some older + hardware. It is therefore recommended that, before enabling this feature, + you test your hardware's compatibility with libstoragemgmt first to avoid + unplanned interruptions to services. + + There are a number of ways to test compatibility, but the simplest may be + to use the cephadm shell to call libstoragemgmt directly - ``cephadm shell + lsmcli ldl``. If your hardware is supported you should see something like + this: + + :: + + Path | SCSI VPD 0x83 | Link Type | Serial Number | Health Status + ---------------------------------------------------------------------------- + /dev/sda | 50000396082ba631 | SAS | 15P0A0R0FRD6 | Good + /dev/sdb | 50000396082bbbf9 | SAS | 15P0A0YFFRD6 | Good + + +After you have enabled libstoragemgmt support, the output will look something +like this: + +:: + + # ceph orch device ls + Hostname Path Type Serial Size Health Ident Fault Available + srv-01 /dev/sdb hdd 15P0A0YFFRD6 300G Good Off Off No + srv-01 /dev/sdc hdd 15R0A08WFRD6 300G Good Off Off No + : + +In this example, libstoragemgmt has confirmed the health of the drives and the ability to +interact with the Identification and Fault LEDs on the drive enclosures. For further +information about interacting with these LEDs, refer to `device management`_. + +.. note:: + The current release of `libstoragemgmt`_ (1.8.8) supports SCSI, SAS, and SATA based + local disks only. There is no official support for NVMe devices (PCIe) + +.. _cephadm-deploy-osds: + +Deploy OSDs +=========== + +Listing Storage Devices +----------------------- + +In order to deploy an OSD, there must be a storage device that is *available* on +which the OSD will be deployed. + +Run this command to display an inventory of storage devices on all cluster hosts: + +.. prompt:: bash # + + ceph orch device ls + +A storage device is considered *available* if all of the following +conditions are met: + +* The device must have no partitions. +* The device must not have any LVM state. +* The device must not be mounted. +* The device must not contain a file system. +* The device must not contain a Ceph BlueStore OSD. +* The device must be larger than 5 GB. + +Ceph will not provision an OSD on a device that is not available. + +Creating New OSDs +----------------- + +There are a few ways to create new OSDs: + +* Tell Ceph to consume any available and unused storage device: + + .. prompt:: bash # + + ceph orch apply osd --all-available-devices + +* Create an OSD from a specific device on a specific host: + + .. prompt:: bash # + + ceph orch daemon add osd *<host>*:*<device-path>* + + For example: + + .. prompt:: bash # + + ceph orch daemon add osd host1:/dev/sdb + + Advanced OSD creation from specific devices on a specific host: + + .. prompt:: bash # + + ceph orch daemon add osd host1:data_devices=/dev/sda,/dev/sdb,db_devices=/dev/sdc,osds_per_device=2 + +* Create an OSD on a specific LVM logical volume on a specific host: + + .. prompt:: bash # + + ceph orch daemon add osd *<host>*:*<lvm-path>* + + For example: + + .. prompt:: bash # + + ceph orch daemon add osd host1:/dev/vg_osd/lvm_osd1701 + +* You can use :ref:`drivegroups` to categorize device(s) based on their + properties. This might be useful in forming a clearer picture of which + devices are available to consume. Properties include device type (SSD or + HDD), device model names, size, and the hosts on which the devices exist: + + .. prompt:: bash # + + ceph orch apply -i spec.yml + +Dry Run +------- + +The ``--dry-run`` flag causes the orchestrator to present a preview of what +will happen without actually creating the OSDs. + +For example: + +.. prompt:: bash # + + ceph orch apply osd --all-available-devices --dry-run + +:: + + NAME HOST DATA DB WAL + all-available-devices node1 /dev/vdb - - + all-available-devices node2 /dev/vdc - - + all-available-devices node3 /dev/vdd - - + +.. _cephadm-osd-declarative: + +Declarative State +----------------- + +The effect of ``ceph orch apply`` is persistent. This means that drives that +are added to the system after the ``ceph orch apply`` command completes will be +automatically found and added to the cluster. It also means that drives that +become available (by zapping, for example) after the ``ceph orch apply`` +command completes will be automatically found and added to the cluster. + +We will examine the effects of the following command: + +.. prompt:: bash # + + ceph orch apply osd --all-available-devices + +After running the above command: + +* If you add new disks to the cluster, they will automatically be used to + create new OSDs. +* If you remove an OSD and clean the LVM physical volume, a new OSD will be + created automatically. + +If you want to avoid this behavior (disable automatic creation of OSD on available devices), use the ``unmanaged`` parameter: + +.. prompt:: bash # + + ceph orch apply osd --all-available-devices --unmanaged=true + +.. note:: + + Keep these three facts in mind: + + - The default behavior of ``ceph orch apply`` causes cephadm constantly to reconcile. This means that cephadm creates OSDs as soon as new drives are detected. + + - Setting ``unmanaged: True`` disables the creation of OSDs. If ``unmanaged: True`` is set, nothing will happen even if you apply a new OSD service. + + - ``ceph orch daemon add`` creates OSDs, but does not add an OSD service. + +* For cephadm, see also :ref:`cephadm-spec-unmanaged`. + +.. _cephadm-osd-removal: + +Remove an OSD +============= + +Removing an OSD from a cluster involves two steps: + +#. evacuating all placement groups (PGs) from the cluster +#. removing the PG-free OSD from the cluster + +The following command performs these two steps: + +.. prompt:: bash # + + ceph orch osd rm <osd_id(s)> [--replace] [--force] + +Example: + +.. prompt:: bash # + + ceph orch osd rm 0 + +Expected output:: + + Scheduled OSD(s) for removal + +OSDs that are not safe to destroy will be rejected. + +.. note:: + After removing OSDs, if the drives the OSDs were deployed on once again + become available, cephadm may automatically try to deploy more OSDs + on these drives if they match an existing drivegroup spec. If you deployed + the OSDs you are removing with a spec and don't want any new OSDs deployed on + the drives after removal, it's best to modify the drivegroup spec before removal. + Either set ``unmanaged: true`` to stop it from picking up new drives at all, + or modify it in some way that it no longer matches the drives used for the + OSDs you wish to remove. Then re-apply the spec. For more info on drivegroup + specs see :ref:`drivegroups`. For more info on the declarative nature of + cephadm in reference to deploying OSDs, see :ref:`cephadm-osd-declarative` + +Monitoring OSD State +-------------------- + +You can query the state of OSD operation with the following command: + +.. prompt:: bash # + + ceph orch osd rm status + +Expected output:: + + OSD_ID HOST STATE PG_COUNT REPLACE FORCE STARTED_AT + 2 cephadm-dev done, waiting for purge 0 True False 2020-07-17 13:01:43.147684 + 3 cephadm-dev draining 17 False True 2020-07-17 13:01:45.162158 + 4 cephadm-dev started 42 False True 2020-07-17 13:01:45.162158 + + +When no PGs are left on the OSD, it will be decommissioned and removed from the cluster. + +.. note:: + After removing an OSD, if you wipe the LVM physical volume in the device used by the removed OSD, a new OSD will be created. + For more information on this, read about the ``unmanaged`` parameter in :ref:`cephadm-osd-declarative`. + +Stopping OSD Removal +-------------------- + +It is possible to stop queued OSD removals by using the following command: + +.. prompt:: bash # + + ceph orch osd rm stop <osd_id(s)> + +Example: + +.. prompt:: bash # + + ceph orch osd rm stop 4 + +Expected output:: + + Stopped OSD(s) removal + +This resets the initial state of the OSD and takes it off the removal queue. + +.. _cephadm-replacing-an-osd: + +Replacing an OSD +---------------- + +.. prompt:: bash # + + ceph orch osd rm <osd_id(s)> --replace [--force] + +Example: + +.. prompt:: bash # + + ceph orch osd rm 4 --replace + +Expected output:: + + Scheduled OSD(s) for replacement + +This follows the same procedure as the procedure in the "Remove OSD" section, with +one exception: the OSD is not permanently removed from the CRUSH hierarchy, but is +instead assigned a 'destroyed' flag. + +.. note:: + The new OSD that will replace the removed OSD must be created on the same host + as the OSD that was removed. + +**Preserving the OSD ID** + +The 'destroyed' flag is used to determine which OSD ids will be reused in the +next OSD deployment. + +If you use OSDSpecs for OSD deployment, your newly added disks will be assigned +the OSD ids of their replaced counterparts. This assumes that the new disks +still match the OSDSpecs. + +Use the ``--dry-run`` flag to make certain that the ``ceph orch apply osd`` +command does what you want it to. The ``--dry-run`` flag shows you what the +outcome of the command will be without making the changes you specify. When +you are satisfied that the command will do what you want, run the command +without the ``--dry-run`` flag. + +.. tip:: + + The name of your OSDSpec can be retrieved with the command ``ceph orch ls`` + +Alternatively, you can use your OSDSpec file: + +.. prompt:: bash # + + ceph orch apply -i <osd_spec_file> --dry-run + +Expected output:: + + NAME HOST DATA DB WAL + <name_of_osd_spec> node1 /dev/vdb - - + + +When this output reflects your intention, omit the ``--dry-run`` flag to +execute the deployment. + + +Erasing Devices (Zapping Devices) +--------------------------------- + +Erase (zap) a device so that it can be reused. ``zap`` calls ``ceph-volume +zap`` on the remote host. + +.. prompt:: bash # + + ceph orch device zap <hostname> <path> + +Example command: + +.. prompt:: bash # + + ceph orch device zap my_hostname /dev/sdx + +.. note:: + If the unmanaged flag is unset, cephadm automatically deploys drives that + match the OSDSpec. For example, if you use the + ``all-available-devices`` option when creating OSDs, when you ``zap`` a + device the cephadm orchestrator automatically creates a new OSD in the + device. To disable this behavior, see :ref:`cephadm-osd-declarative`. + + +.. _osd_autotune: + +Automatically tuning OSD memory +=============================== + +OSD daemons will adjust their memory consumption based on the +``osd_memory_target`` config option (several gigabytes, by +default). If Ceph is deployed on dedicated nodes that are not sharing +memory with other services, cephadm can automatically adjust the per-OSD +memory consumption based on the total amount of RAM and the number of deployed +OSDs. + +.. warning:: Cephadm sets ``osd_memory_target_autotune`` to ``true`` by default which is unsuitable for hyperconverged infrastructures. + +Cephadm will start with a fraction +(``mgr/cephadm/autotune_memory_target_ratio``, which defaults to +``.7``) of the total RAM in the system, subtract off any memory +consumed by non-autotuned daemons (non-OSDs, for OSDs for which +``osd_memory_target_autotune`` is false), and then divide by the +remaining OSDs. + +The final targets are reflected in the config database with options like:: + + WHO MASK LEVEL OPTION VALUE + osd host:foo basic osd_memory_target 126092301926 + osd host:bar basic osd_memory_target 6442450944 + +Both the limits and the current memory consumed by each daemon are visible from +the ``ceph orch ps`` output in the ``MEM LIMIT`` column:: + + NAME HOST PORTS STATUS REFRESHED AGE MEM USED MEM LIMIT VERSION IMAGE ID CONTAINER ID + osd.1 dael running (3h) 10s ago 3h 72857k 117.4G 17.0.0-3781-gafaed750 7015fda3cd67 9e183363d39c + osd.2 dael running (81m) 10s ago 81m 63989k 117.4G 17.0.0-3781-gafaed750 7015fda3cd67 1f0cc479b051 + osd.3 dael running (62m) 10s ago 62m 64071k 117.4G 17.0.0-3781-gafaed750 7015fda3cd67 ac5537492f27 + +To exclude an OSD from memory autotuning, disable the autotune option +for that OSD and also set a specific memory target. For example, + +.. prompt:: bash # + + ceph config set osd.123 osd_memory_target_autotune false + ceph config set osd.123 osd_memory_target 16G + + +.. _drivegroups: + +Advanced OSD Service Specifications +=================================== + +:ref:`orchestrator-cli-service-spec`\s of type ``osd`` are a way to describe a +cluster layout, using the properties of disks. Service specifications give the +user an abstract way to tell Ceph which disks should turn into OSDs with which +configurations, without knowing the specifics of device names and paths. + +Service specifications make it possible to define a yaml or json file that can +be used to reduce the amount of manual work involved in creating OSDs. + +For example, instead of running the following command: + +.. prompt:: bash [monitor.1]# + + ceph orch daemon add osd *<host>*:*<path-to-device>* + +for each device and each host, we can define a yaml or json file that allows us +to describe the layout. Here's the most basic example. + +Create a file called (for example) ``osd_spec.yml``: + +.. code-block:: yaml + + service_type: osd + service_id: default_drive_group # custom name of the osd spec + placement: + host_pattern: '*' # which hosts to target + spec: + data_devices: # the type of devices you are applying specs to + all: true # a filter, check below for a full list + +This means : + +#. Turn any available device (ceph-volume decides what 'available' is) into an + OSD on all hosts that match the glob pattern '*'. (The glob pattern matches + against the registered hosts from `host ls`) A more detailed section on + host_pattern is available below. + +#. Then pass it to `osd create` like this: + + .. prompt:: bash [monitor.1]# + + ceph orch apply -i /path/to/osd_spec.yml + + This instruction will be issued to all the matching hosts, and will deploy + these OSDs. + + Setups more complex than the one specified by the ``all`` filter are + possible. See :ref:`osd_filters` for details. + + A ``--dry-run`` flag can be passed to the ``apply osd`` command to display a + synopsis of the proposed layout. + +Example + +.. prompt:: bash [monitor.1]# + + ceph orch apply -i /path/to/osd_spec.yml --dry-run + + + +.. _osd_filters: + +Filters +------- + +.. note:: + Filters are applied using an `AND` gate by default. This means that a drive + must fulfill all filter criteria in order to get selected. This behavior can + be adjusted by setting ``filter_logic: OR`` in the OSD specification. + +Filters are used to assign disks to groups, using their attributes to group +them. + +The attributes are based off of ceph-volume's disk query. You can retrieve +information about the attributes with this command: + +.. code-block:: bash + + ceph-volume inventory </path/to/disk> + +Vendor or Model +^^^^^^^^^^^^^^^ + +Specific disks can be targeted by vendor or model: + +.. code-block:: yaml + + model: disk_model_name + +or + +.. code-block:: yaml + + vendor: disk_vendor_name + + +Size +^^^^ + +Specific disks can be targeted by `Size`: + +.. code-block:: yaml + + size: size_spec + +Size specs +__________ + +Size specifications can be of the following forms: + +* LOW:HIGH +* :HIGH +* LOW: +* EXACT + +Concrete examples: + +To include disks of an exact size + +.. code-block:: yaml + + size: '10G' + +To include disks within a given range of size: + +.. code-block:: yaml + + size: '10G:40G' + +To include disks that are less than or equal to 10G in size: + +.. code-block:: yaml + + size: ':10G' + +To include disks equal to or greater than 40G in size: + +.. code-block:: yaml + + size: '40G:' + +Sizes don't have to be specified exclusively in Gigabytes(G). + +Other units of size are supported: Megabyte(M), Gigabyte(G) and Terabyte(T). +Appending the (B) for byte is also supported: ``MB``, ``GB``, ``TB``. + + +Rotational +^^^^^^^^^^ + +This operates on the 'rotational' attribute of the disk. + +.. code-block:: yaml + + rotational: 0 | 1 + +`1` to match all disks that are rotational + +`0` to match all disks that are non-rotational (SSD, NVME etc) + + +All +^^^ + +This will take all disks that are 'available' + +.. note:: This is exclusive for the data_devices section. + +.. code-block:: yaml + + all: true + + +Limiter +^^^^^^^ + +If you have specified some valid filters but want to limit the number of disks that they match, use the ``limit`` directive: + +.. code-block:: yaml + + limit: 2 + +For example, if you used `vendor` to match all disks that are from `VendorA` +but want to use only the first two, you could use `limit`: + +.. code-block:: yaml + + data_devices: + vendor: VendorA + limit: 2 + +.. note:: `limit` is a last resort and shouldn't be used if it can be avoided. + + +Additional Options +------------------ + +There are multiple optional settings you can use to change the way OSDs are deployed. +You can add these options to the base level of an OSD spec for it to take effect. + +This example would deploy all OSDs with encryption enabled. + +.. code-block:: yaml + + service_type: osd + service_id: example_osd_spec + placement: + host_pattern: '*' + spec: + data_devices: + all: true + encrypted: true + +See a full list in the DriveGroupSpecs + +.. py:currentmodule:: ceph.deployment.drive_group + +.. autoclass:: DriveGroupSpec + :members: + :exclude-members: from_json + + +Examples +======== + +The simple case +--------------- + +All nodes with the same setup + +.. code-block:: none + + 20 HDDs + Vendor: VendorA + Model: HDD-123-foo + Size: 4TB + + 2 SSDs + Vendor: VendorB + Model: MC-55-44-ZX + Size: 512GB + +This is a common setup and can be described quite easily: + +.. code-block:: yaml + + service_type: osd + service_id: osd_spec_default + placement: + host_pattern: '*' + spec: + data_devices: + model: HDD-123-foo # Note, HDD-123 would also be valid + db_devices: + model: MC-55-44-XZ # Same here, MC-55-44 is valid + +However, we can improve it by reducing the filters on core properties of the drives: + +.. code-block:: yaml + + service_type: osd + service_id: osd_spec_default + placement: + host_pattern: '*' + spec: + data_devices: + rotational: 1 + db_devices: + rotational: 0 + +Now, we enforce all rotating devices to be declared as 'data devices' and all non-rotating devices will be used as shared_devices (wal, db) + +If you know that drives with more than 2TB will always be the slower data devices, you can also filter by size: + +.. code-block:: yaml + + service_type: osd + service_id: osd_spec_default + placement: + host_pattern: '*' + spec: + data_devices: + size: '2TB:' + db_devices: + size: ':2TB' + +.. note:: All of the above OSD specs are equally valid. Which of those you want to use depends on taste and on how much you expect your node layout to change. + + +Multiple OSD specs for a single host +------------------------------------ + +Here we have two distinct setups + +.. code-block:: none + + 20 HDDs + Vendor: VendorA + Model: HDD-123-foo + Size: 4TB + + 12 SSDs + Vendor: VendorB + Model: MC-55-44-ZX + Size: 512GB + + 2 NVMEs + Vendor: VendorC + Model: NVME-QQQQ-987 + Size: 256GB + + +* 20 HDDs should share 2 SSDs +* 10 SSDs should share 2 NVMes + +This can be described with two layouts. + +.. code-block:: yaml + + service_type: osd + service_id: osd_spec_hdd + placement: + host_pattern: '*' + spec: + data_devices: + rotational: 1 + db_devices: + model: MC-55-44-XZ + limit: 2 # db_slots is actually to be favoured here, but it's not implemented yet + --- + service_type: osd + service_id: osd_spec_ssd + placement: + host_pattern: '*' + spec: + data_devices: + model: MC-55-44-XZ + db_devices: + vendor: VendorC + +This would create the desired layout by using all HDDs as data_devices with two SSD assigned as dedicated db/wal devices. +The remaining SSDs(10) will be data_devices that have the 'VendorC' NVMEs assigned as dedicated db/wal devices. + +Multiple hosts with the same disk layout +---------------------------------------- + +Assuming the cluster has different kinds of hosts each with similar disk +layout, it is recommended to apply different OSD specs matching only one +set of hosts. Typically you will have a spec for multiple hosts with the +same layout. + +The service id as the unique key: In case a new OSD spec with an already +applied service id is applied, the existing OSD spec will be superseded. +cephadm will now create new OSD daemons based on the new spec +definition. Existing OSD daemons will not be affected. See :ref:`cephadm-osd-declarative`. + +Node1-5 + +.. code-block:: none + + 20 HDDs + Vendor: VendorA + Model: SSD-123-foo + Size: 4TB + 2 SSDs + Vendor: VendorB + Model: MC-55-44-ZX + Size: 512GB + +Node6-10 + +.. code-block:: none + + 5 NVMEs + Vendor: VendorA + Model: SSD-123-foo + Size: 4TB + 20 SSDs + Vendor: VendorB + Model: MC-55-44-ZX + Size: 512GB + +You can use the 'placement' key in the layout to target certain nodes. + +.. code-block:: yaml + + service_type: osd + service_id: disk_layout_a + placement: + label: disk_layout_a + spec: + data_devices: + rotational: 1 + db_devices: + rotational: 0 + --- + service_type: osd + service_id: disk_layout_b + placement: + label: disk_layout_b + spec: + data_devices: + model: MC-55-44-XZ + db_devices: + model: SSD-123-foo + + +This applies different OSD specs to different hosts depending on the `placement` key. +See :ref:`orchestrator-cli-placement-spec` + +.. note:: + + Assuming each host has a unique disk layout, each OSD + spec needs to have a different service id + + +Dedicated wal + db +------------------ + +All previous cases co-located the WALs with the DBs. +It's however possible to deploy the WAL on a dedicated device as well, if it makes sense. + +.. code-block:: none + + 20 HDDs + Vendor: VendorA + Model: SSD-123-foo + Size: 4TB + + 2 SSDs + Vendor: VendorB + Model: MC-55-44-ZX + Size: 512GB + + 2 NVMEs + Vendor: VendorC + Model: NVME-QQQQ-987 + Size: 256GB + + +The OSD spec for this case would look like the following (using the `model` filter): + +.. code-block:: yaml + + service_type: osd + service_id: osd_spec_default + placement: + host_pattern: '*' + spec: + data_devices: + model: MC-55-44-XZ + db_devices: + model: SSD-123-foo + wal_devices: + model: NVME-QQQQ-987 + + +It is also possible to specify directly device paths in specific hosts like the following: + +.. code-block:: yaml + + service_type: osd + service_id: osd_using_paths + placement: + hosts: + - Node01 + - Node02 + spec: + data_devices: + paths: + - /dev/sdb + db_devices: + paths: + - /dev/sdc + wal_devices: + paths: + - /dev/sdd + + +This can easily be done with other filters, like `size` or `vendor` as well. + +It's possible to specify the `crush_device_class` parameter within the +DriveGroup spec, and it's applied to all the devices defined by the `paths` +keyword: + +.. code-block:: yaml + + service_type: osd + service_id: osd_using_paths + placement: + hosts: + - Node01 + - Node02 + crush_device_class: ssd + spec: + data_devices: + paths: + - /dev/sdb + - /dev/sdc + db_devices: + paths: + - /dev/sdd + wal_devices: + paths: + - /dev/sde + +The `crush_device_class` parameter, however, can be defined for each OSD passed +using the `paths` keyword with the following syntax: + +.. code-block:: yaml + + service_type: osd + service_id: osd_using_paths + placement: + hosts: + - Node01 + - Node02 + crush_device_class: ssd + spec: + data_devices: + paths: + - path: /dev/sdb + crush_device_class: ssd + - path: /dev/sdc + crush_device_class: nvme + db_devices: + paths: + - /dev/sdd + wal_devices: + paths: + - /dev/sde + +.. _cephadm-osd-activate: + +Activate existing OSDs +====================== + +In case the OS of a host was reinstalled, existing OSDs need to be activated +again. For this use case, cephadm provides a wrapper for :ref:`ceph-volume-lvm-activate` that +activates all existing OSDs on a host. + +.. prompt:: bash # + + ceph cephadm osd activate <host>... + +This will scan all existing disks for OSDs and deploy corresponding daemons. + +Further Reading +=============== + +* :ref:`ceph-volume` +* :ref:`rados-index` |