diff options
Diffstat (limited to '')
| -rw-r--r-- | doc/cephfs/fs-volumes.rst | 653 |
1 files changed, 653 insertions, 0 deletions
diff --git a/doc/cephfs/fs-volumes.rst b/doc/cephfs/fs-volumes.rst new file mode 100644 index 000000000..e7fd377bf --- /dev/null +++ b/doc/cephfs/fs-volumes.rst @@ -0,0 +1,653 @@ +.. _fs-volumes-and-subvolumes: + +FS volumes and subvolumes +========================= + +The volumes module of the :term:`Ceph Manager` daemon (ceph-mgr) provides a +single source of truth for CephFS exports. The OpenStack shared file system +service (manila_) and the Ceph Container Storage Interface (CSI_) storage +administrators use the common CLI provided by the ceph-mgr ``volumes`` module +to manage CephFS exports. + +The ceph-mgr ``volumes`` module implements the following file system export +abstractions: + +* FS volumes, an abstraction for CephFS file systems + +* FS subvolumes, an abstraction for independent CephFS directory trees + +* FS subvolume groups, an abstraction for a directory level higher than FS + subvolumes. Used to effect policies (e.g., :doc:`/cephfs/file-layouts`) + across a set of subvolumes + +Some possible use-cases for the export abstractions: + +* FS subvolumes used as Manila shares or CSI volumes + +* FS subvolume groups used as Manila share groups + +Requirements +------------ + +* Nautilus (14.2.x) or later Ceph release + +* Cephx client user (see :doc:`/rados/operations/user-management`) with + at least the following capabilities:: + + mon 'allow r' + mgr 'allow rw' + +FS Volumes +---------- + +Create a volume by running the following command: + +.. prompt:: bash # + + ceph fs volume create <vol_name> [placement] + +This creates a CephFS file system and its data and metadata pools. It can also +deploy MDS daemons for the filesystem using a ceph-mgr orchestrator module (for +example Rook). See :doc:`/mgr/orchestrator`. + +``<vol_name>`` is the volume name (an arbitrary string). ``[placement]`` is an +optional string that specifies the :ref:`orchestrator-cli-placement-spec` for +the MDS. See also :ref:`orchestrator-cli-cephfs` for more examples on +placement. + +.. note:: Specifying placement via a YAML file is not supported through the + volume interface. + +To remove a volume, run the following command: + + $ ceph fs volume rm <vol_name> [--yes-i-really-mean-it] + +This removes a file system and its data and metadata pools. It also tries to +remove MDS daemons using the enabled ceph-mgr orchestrator module. + +.. note:: After volume deletion, it is recommended to restart `ceph-mgr` + if a new file system is created on the same cluster and subvolume interface + is being used. Please see https://tracker.ceph.com/issues/49605#note-5 + for more details. + +List volumes by running the following command: + + $ ceph fs volume ls + +Rename a volume by running the following command: + + $ ceph fs volume rename <vol_name> <new_vol_name> [--yes-i-really-mean-it] + +Renaming a volume can be an expensive operation that requires the following: + +- Renaming the orchestrator-managed MDS service to match the <new_vol_name>. + This involves launching a MDS service with ``<new_vol_name>`` and bringing + down the MDS service with ``<vol_name>``. +- Renaming the file system matching ``<vol_name>`` to ``<new_vol_name>``. +- Changing the application tags on the data and metadata pools of the file system + to ``<new_vol_name>``. +- Renaming the metadata and data pools of the file system. + +The CephX IDs that are authorized for ``<vol_name>`` must be reauthorized for +``<new_vol_name>``. Any ongoing operations of the clients using these IDs may +be disrupted. Ensure that mirroring is disabled on the volume. + +To fetch the information of a CephFS volume, run the following command: + + $ ceph fs volume info vol_name [--human_readable] + +The ``--human_readable`` flag shows used and available pool capacities in KB/MB/GB. + +The output format is JSON and contains fields as follows: + +* ``pools``: Attributes of data and metadata pools + * ``avail``: The amount of free space available in bytes + * ``used``: The amount of storage consumed in bytes + * ``name``: Name of the pool +* ``mon_addrs``: List of Ceph monitor addresses +* ``used_size``: Current used size of the CephFS volume in bytes +* ``pending_subvolume_deletions``: Number of subvolumes pending deletion + +Sample output of the ``volume info`` command:: + + $ ceph fs volume info vol_name + { + "mon_addrs": [ + "192.168.1.7:40977" + ], + "pending_subvolume_deletions": 0, + "pools": { + "data": [ + { + "avail": 106288709632, + "name": "cephfs.vol_name.data", + "used": 4096 + } + ], + "metadata": [ + { + "avail": 106288709632, + "name": "cephfs.vol_name.meta", + "used": 155648 + } + ] + }, + "used_size": 0 + } + +FS Subvolume groups +------------------- + +Create a subvolume group by running the following command: + + $ ceph fs subvolumegroup create <vol_name> <group_name> [--size <size_in_bytes>] [--pool_layout <data_pool_name>] [--uid <uid>] [--gid <gid>] [--mode <octal_mode>] + +The command succeeds even if the subvolume group already exists. + +When creating a subvolume group you can specify its data pool layout (see +:doc:`/cephfs/file-layouts`), uid, gid, file mode in octal numerals, and +size in bytes. The size of the subvolume group is specified by setting +a quota on it (see :doc:`/cephfs/quota`). By default, the subvolume group +is created with octal file mode ``755``, uid ``0``, gid ``0`` and the data pool +layout of its parent directory. + +Remove a subvolume group by running a command of the following form: + + $ ceph fs subvolumegroup rm <vol_name> <group_name> [--force] + +The removal of a subvolume group fails if the subvolume group is not empty or +is non-existent. The ``--force`` flag allows the non-existent "subvolume group remove +command" to succeed. + +Fetch the absolute path of a subvolume group by running a command of the +following form: + + $ ceph fs subvolumegroup getpath <vol_name> <group_name> + +List subvolume groups by running a command of the following form: + + $ ceph fs subvolumegroup ls <vol_name> + +.. note:: Subvolume group snapshot feature is no longer supported in mainline + CephFS (existing group snapshots can still be listed and deleted) + +Fetch the metadata of a subvolume group by running a command of the following form: + +.. prompt:: bash # + + ceph fs subvolumegroup info <vol_name> <group_name> + +The output format is JSON and contains fields as follows: + +* ``atime``: access time of the subvolume group path in the format "YYYY-MM-DD HH:MM:SS" +* ``mtime``: modification time of the subvolume group path in the format "YYYY-MM-DD HH:MM:SS" +* ``ctime``: change time of the subvolume group path in the format "YYYY-MM-DD HH:MM:SS" +* ``uid``: uid of the subvolume group path +* ``gid``: gid of the subvolume group path +* ``mode``: mode of the subvolume group path +* ``mon_addrs``: list of monitor addresses +* ``bytes_pcent``: quota used in percentage if quota is set, else displays "undefined" +* ``bytes_quota``: quota size in bytes if quota is set, else displays "infinite" +* ``bytes_used``: current used size of the subvolume group in bytes +* ``created_at``: creation time of the subvolume group in the format "YYYY-MM-DD HH:MM:SS" +* ``data_pool``: data pool to which the subvolume group belongs + +Check the presence of any subvolume group by running a command of the following +form: + +.. prompt:: bash $ + + ceph fs subvolumegroup exist <vol_name> + +The ``exist`` command outputs: + +* "subvolumegroup exists": if any subvolumegroup is present +* "no subvolumegroup exists": if no subvolumegroup is present + +.. note:: This command checks for the presence of custom groups and not + presence of the default one. To validate the emptiness of the volume, a + subvolumegroup existence check alone is not sufficient. Subvolume existence + also needs to be checked as there might be subvolumes in the default group. + +Resize a subvolume group by running a command of the following form: + +.. prompt:: bash $ + + ceph fs subvolumegroup resize <vol_name> <group_name> <new_size> [--no_shrink] + +The command resizes the subvolume group quota, using the size specified by +``new_size``. The ``--no_shrink`` flag prevents the subvolume group from +shrinking below the current used size. + +The subvolume group may be resized to an infinite size by passing ``inf`` or +``infinite`` as the ``new_size``. + +Remove a snapshot of a subvolume group by running a command of the following form: + +.. prompt:: bash $ + + ceph fs subvolumegroup snapshot rm <vol_name> <group_name> <snap_name> [--force] + +Supplying the ``--force`` flag allows the command to succeed when it would +otherwise fail due to the nonexistence of the snapshot. + +List snapshots of a subvolume group by running a command of the following form: + +.. prompt:: bash $ + + ceph fs subvolumegroup snapshot ls <vol_name> <group_name> + + +FS Subvolumes +------------- + +Create a subvolume using:: + + $ ceph fs subvolume create <vol_name> <subvol_name> [--size <size_in_bytes>] [--group_name <subvol_group_name>] [--pool_layout <data_pool_name>] [--uid <uid>] [--gid <gid>] [--mode <octal_mode>] [--namespace-isolated] + + +The command succeeds even if the subvolume already exists. + +When creating a subvolume you can specify its subvolume group, data pool layout, +uid, gid, file mode in octal numerals, and size in bytes. The size of the subvolume is +specified by setting a quota on it (see :doc:`/cephfs/quota`). The subvolume can be +created in a separate RADOS namespace by specifying --namespace-isolated option. By +default a subvolume is created within the default subvolume group, and with an octal file +mode '755', uid of its subvolume group, gid of its subvolume group, data pool layout of +its parent directory and no size limit. + +Remove a subvolume using:: + + $ ceph fs subvolume rm <vol_name> <subvol_name> [--group_name <subvol_group_name>] [--force] [--retain-snapshots] + +The command removes the subvolume and its contents. It does this in two steps. +First, it moves the subvolume to a trash folder, and then asynchronously purges +its contents. + +The removal of a subvolume fails if it has snapshots, or is non-existent. +'--force' flag allows the non-existent subvolume remove command to succeed. + +A subvolume can be removed retaining existing snapshots of the subvolume using the +'--retain-snapshots' option. If snapshots are retained, the subvolume is considered +empty for all operations not involving the retained snapshots. + +.. note:: Snapshot retained subvolumes can be recreated using 'ceph fs subvolume create' + +.. note:: Retained snapshots can be used as a clone source to recreate the subvolume, or clone to a newer subvolume. + +Resize a subvolume using:: + + $ ceph fs subvolume resize <vol_name> <subvol_name> <new_size> [--group_name <subvol_group_name>] [--no_shrink] + +The command resizes the subvolume quota using the size specified by ``new_size``. +The `--no_shrink`` flag prevents the subvolume from shrinking below the current used size of the subvolume. + +The subvolume can be resized to an unlimited (but sparse) logical size by passing ``inf`` or ``infinite`` as `` new_size``. + +Authorize cephx auth IDs, the read/read-write access to fs subvolumes:: + + $ ceph fs subvolume authorize <vol_name> <sub_name> <auth_id> [--group_name=<group_name>] [--access_level=<access_level>] + +The ``access_level`` takes ``r`` or ``rw`` as value. + +Deauthorize cephx auth IDs, the read/read-write access to fs subvolumes:: + + $ ceph fs subvolume deauthorize <vol_name> <sub_name> <auth_id> [--group_name=<group_name>] + +List cephx auth IDs authorized to access fs subvolume:: + + $ ceph fs subvolume authorized_list <vol_name> <sub_name> [--group_name=<group_name>] + +Evict fs clients based on auth ID and subvolume mounted:: + + $ ceph fs subvolume evict <vol_name> <sub_name> <auth_id> [--group_name=<group_name>] + +Fetch the absolute path of a subvolume using:: + + $ ceph fs subvolume getpath <vol_name> <subvol_name> [--group_name <subvol_group_name>] + +Fetch the information of a subvolume using:: + + $ ceph fs subvolume info <vol_name> <subvol_name> [--group_name <subvol_group_name>] + +The output format is JSON and contains fields as follows. + +* ``atime``: access time of the subvolume path in the format "YYYY-MM-DD HH:MM:SS" +* ``mtime``: modification time of the subvolume path in the format "YYYY-MM-DD HH:MM:SS" +* ``ctime``: change time of the subvolume path in the format "YYYY-MM-DD HH:MM:SS" +* ``uid``: uid of the subvolume path +* ``gid``: gid of the subvolume path +* ``mode``: mode of the subvolume path +* ``mon_addrs``: list of monitor addresses +* ``bytes_pcent``: quota used in percentage if quota is set, else displays ``undefined`` +* ``bytes_quota``: quota size in bytes if quota is set, else displays ``infinite`` +* ``bytes_used``: current used size of the subvolume in bytes +* ``created_at``: creation time of the subvolume in the format "YYYY-MM-DD HH:MM:SS" +* ``data_pool``: data pool to which the subvolume belongs +* ``path``: absolute path of a subvolume +* ``type``: subvolume type indicating whether it's clone or subvolume +* ``pool_namespace``: RADOS namespace of the subvolume +* ``features``: features supported by the subvolume +* ``state``: current state of the subvolume + +If a subvolume has been removed retaining its snapshots, the output contains only fields as follows. + +* ``type``: subvolume type indicating whether it's clone or subvolume +* ``features``: features supported by the subvolume +* ``state``: current state of the subvolume + +A subvolume's ``features`` are based on the internal version of the subvolume and are +a subset of the following: + +* ``snapshot-clone``: supports cloning using a subvolumes snapshot as the source +* ``snapshot-autoprotect``: supports automatically protecting snapshots, that are active clone sources, from deletion +* ``snapshot-retention``: supports removing subvolume contents, retaining any existing snapshots + +A subvolume's ``state`` is based on the current state of the subvolume and contains one of the following values. + +* ``complete``: subvolume is ready for all operations +* ``snapshot-retained``: subvolume is removed but its snapshots are retained + +List subvolumes using:: + + $ ceph fs subvolume ls <vol_name> [--group_name <subvol_group_name>] + +.. note:: subvolumes that are removed but have snapshots retained, are also listed. + +Check the presence of any subvolume using:: + + $ ceph fs subvolume exist <vol_name> [--group_name <subvol_group_name>] + +These are the possible results of the ``exist`` command: + +* ``subvolume exists``: if any subvolume of given group_name is present +* ``no subvolume exists``: if no subvolume of given group_name is present + +Set custom metadata on the subvolume as a key-value pair using:: + + $ ceph fs subvolume metadata set <vol_name> <subvol_name> <key_name> <value> [--group_name <subvol_group_name>] + +.. note:: If the key_name already exists then the old value will get replaced by the new value. + +.. note:: key_name and value should be a string of ASCII characters (as specified in python's string.printable). key_name is case-insensitive and always stored in lower case. + +.. note:: Custom metadata on a subvolume is not preserved when snapshotting the subvolume, and hence, is also not preserved when cloning the subvolume snapshot. + +Get custom metadata set on the subvolume using the metadata key:: + + $ ceph fs subvolume metadata get <vol_name> <subvol_name> <key_name> [--group_name <subvol_group_name>] + +List custom metadata (key-value pairs) set on the subvolume using:: + + $ ceph fs subvolume metadata ls <vol_name> <subvol_name> [--group_name <subvol_group_name>] + +Remove custom metadata set on the subvolume using the metadata key:: + + $ ceph fs subvolume metadata rm <vol_name> <subvol_name> <key_name> [--group_name <subvol_group_name>] [--force] + +Using the ``--force`` flag allows the command to succeed that would otherwise +fail if the metadata key did not exist. + +Create a snapshot of a subvolume using:: + + $ ceph fs subvolume snapshot create <vol_name> <subvol_name> <snap_name> [--group_name <subvol_group_name>] + +Remove a snapshot of a subvolume using:: + + $ ceph fs subvolume snapshot rm <vol_name> <subvol_name> <snap_name> [--group_name <subvol_group_name>] [--force] + +Using the ``--force`` flag allows the command to succeed that would otherwise +fail if the snapshot did not exist. + +.. note:: if the last snapshot within a snapshot retained subvolume is removed, the subvolume is also removed + +List snapshots of a subvolume using:: + + $ ceph fs subvolume snapshot ls <vol_name> <subvol_name> [--group_name <subvol_group_name>] + +Fetch the information of a snapshot using:: + + $ ceph fs subvolume snapshot info <vol_name> <subvol_name> <snap_name> [--group_name <subvol_group_name>] + +The output format is JSON and contains fields as follows. + +* ``created_at``: creation time of the snapshot in the format "YYYY-MM-DD HH:MM:SS:ffffff" +* ``data_pool``: data pool to which the snapshot belongs +* ``has_pending_clones``: ``yes`` if snapshot clone is in progress, otherwise ``no`` +* ``pending_clones``: list of in-progress or pending clones and their target group if any exist, otherwise this field is not shown +* ``orphan_clones_count``: count of orphan clones if the snapshot has orphan clones, otherwise this field is not shown + +Sample output when snapshot clones are in progress or pending:: + + $ ceph fs subvolume snapshot info cephfs subvol snap + { + "created_at": "2022-06-14 13:54:58.618769", + "data_pool": "cephfs.cephfs.data", + "has_pending_clones": "yes", + "pending_clones": [ + { + "name": "clone_1", + "target_group": "target_subvol_group" + }, + { + "name": "clone_2" + }, + { + "name": "clone_3", + "target_group": "target_subvol_group" + } + ] + } + +Sample output when no snapshot clone is in progress or pending:: + + $ ceph fs subvolume snapshot info cephfs subvol snap + { + "created_at": "2022-06-14 13:54:58.618769", + "data_pool": "cephfs.cephfs.data", + "has_pending_clones": "no" + } + +Set custom key-value metadata on the snapshot by running:: + + $ ceph fs subvolume snapshot metadata set <vol_name> <subvol_name> <snap_name> <key_name> <value> [--group_name <subvol_group_name>] + +.. note:: If the key_name already exists then the old value will get replaced by the new value. + +.. note:: The key_name and value should be a strings of ASCII characters (as specified in Python's ``string.printable``). The key_name is case-insensitive and always stored in lowercase. + +.. note:: Custom metadata on a snapshot is not preserved when snapshotting the subvolume, and hence is also not preserved when cloning the subvolume snapshot. + +Get custom metadata set on the snapshot using the metadata key:: + + $ ceph fs subvolume snapshot metadata get <vol_name> <subvol_name> <snap_name> <key_name> [--group_name <subvol_group_name>] + +List custom metadata (key-value pairs) set on the snapshot using:: + + $ ceph fs subvolume snapshot metadata ls <vol_name> <subvol_name> <snap_name> [--group_name <subvol_group_name>] + +Remove custom metadata set on the snapshot using the metadata key:: + + $ ceph fs subvolume snapshot metadata rm <vol_name> <subvol_name> <snap_name> <key_name> [--group_name <subvol_group_name>] [--force] + +Using the ``--force`` flag allows the command to succeed that would otherwise +fail if the metadata key did not exist. + +Cloning Snapshots +----------------- + +Subvolumes can be created by cloning subvolume snapshots. Cloning is an asynchronous operation that copies +data from a snapshot to a subvolume. Due to this bulk copying, cloning is inefficient for very large +data sets. + +.. note:: Removing a snapshot (source subvolume) would fail if there are pending or in progress clone operations. + +Protecting snapshots prior to cloning was a prerequisite in the Nautilus release, and the commands to protect/unprotect +snapshots were introduced for this purpose. This prerequisite, and hence the commands to protect/unprotect, is being +deprecated and may be removed from a future release. + +The commands being deprecated are: + +.. prompt:: bash # + + ceph fs subvolume snapshot protect <vol_name> <subvol_name> <snap_name> [--group_name <subvol_group_name>] + ceph fs subvolume snapshot unprotect <vol_name> <subvol_name> <snap_name> [--group_name <subvol_group_name>] + +.. note:: Using the above commands will not result in an error, but they have no useful purpose. + +.. note:: Use the ``subvolume info`` command to fetch subvolume metadata regarding supported ``features`` to help decide if protect/unprotect of snapshots is required, based on the availability of the ``snapshot-autoprotect`` feature. + +To initiate a clone operation use:: + + $ ceph fs subvolume snapshot clone <vol_name> <subvol_name> <snap_name> <target_subvol_name> + +If a snapshot (source subvolume) is a part of non-default group, the group name needs to be specified:: + + $ ceph fs subvolume snapshot clone <vol_name> <subvol_name> <snap_name> <target_subvol_name> --group_name <subvol_group_name> + +Cloned subvolumes can be a part of a different group than the source snapshot (by default, cloned subvolumes are created in default group). To clone to a particular group use:: + + $ ceph fs subvolume snapshot clone <vol_name> <subvol_name> <snap_name> <target_subvol_name> --target_group_name <subvol_group_name> + +Similar to specifying a pool layout when creating a subvolume, pool layout can be specified when creating a cloned subvolume. To create a cloned subvolume with a specific pool layout use:: + + $ ceph fs subvolume snapshot clone <vol_name> <subvol_name> <snap_name> <target_subvol_name> --pool_layout <pool_layout> + +Configure the maximum number of concurrent clones. The default is 4:: + + $ ceph config set mgr mgr/volumes/max_concurrent_clones <value> + +To check the status of a clone operation use:: + + $ ceph fs clone status <vol_name> <clone_name> [--group_name <group_name>] + +A clone can be in one of the following states: + +#. ``pending`` : Clone operation has not started +#. ``in-progress`` : Clone operation is in progress +#. ``complete`` : Clone operation has successfully finished +#. ``failed`` : Clone operation has failed +#. ``canceled`` : Clone operation is cancelled by user + +The reason for a clone failure is shown as below: + +#. ``errno`` : error number +#. ``error_msg`` : failure error string + +Here is an example of an ``in-progress`` clone:: + + $ ceph fs subvolume snapshot clone cephfs subvol1 snap1 clone1 + $ ceph fs clone status cephfs clone1 + { + "status": { + "state": "in-progress", + "source": { + "volume": "cephfs", + "subvolume": "subvol1", + "snapshot": "snap1" + } + } + } + +.. note:: The ``failure`` section will be shown only if the clone's state is ``failed`` or ``cancelled`` + +Here is an example of a ``failed`` clone:: + + $ ceph fs subvolume snapshot clone cephfs subvol1 snap1 clone1 + $ ceph fs clone status cephfs clone1 + { + "status": { + "state": "failed", + "source": { + "volume": "cephfs", + "subvolume": "subvol1", + "snapshot": "snap1" + "size": "104857600" + }, + "failure": { + "errno": "122", + "errstr": "Disk quota exceeded" + } + } + } + +(NOTE: since ``subvol1`` is in the default group, the ``source`` object's ``clone status`` does not include the group name) + +.. note:: Cloned subvolumes are accessible only after the clone operation has successfully completed. + +After a successful clone operation, ``clone status`` will look like the below:: + + $ ceph fs clone status cephfs clone1 + { + "status": { + "state": "complete" + } + } + +If a clone operation is unsuccessful, the ``state`` value will be ``failed``. + +To retry a failed clone operation, the incomplete clone must be deleted and the clone operation must be issued again. +To delete a partial clone use:: + + $ ceph fs subvolume rm <vol_name> <clone_name> [--group_name <group_name>] --force + +.. note:: Cloning synchronizes only directories, regular files and symbolic links. Inode timestamps (access and + modification times) are synchronized up to seconds granularity. + +An ``in-progress`` or a ``pending`` clone operation may be canceled. To cancel a clone operation use the ``clone cancel`` command:: + + $ ceph fs clone cancel <vol_name> <clone_name> [--group_name <group_name>] + +On successful cancellation, the cloned subvolume is moved to the ``canceled`` state:: + + $ ceph fs subvolume snapshot clone cephfs subvol1 snap1 clone1 + $ ceph fs clone cancel cephfs clone1 + $ ceph fs clone status cephfs clone1 + { + "status": { + "state": "canceled", + "source": { + "volume": "cephfs", + "subvolume": "subvol1", + "snapshot": "snap1" + } + } + } + +.. note:: The canceled cloned may be deleted by supplying the ``--force`` option to the `fs subvolume rm` command. + + +.. _subvol-pinning: + +Pinning Subvolumes and Subvolume Groups +--------------------------------------- + +Subvolumes and subvolume groups may be automatically pinned to ranks according +to policies. This can distribute load across MDS ranks in predictable and +stable ways. Review :ref:`cephfs-pinning` and :ref:`cephfs-ephemeral-pinning` +for details on how pinning works. + +Pinning is configured by:: + + $ ceph fs subvolumegroup pin <vol_name> <group_name> <pin_type> <pin_setting> + +or for subvolumes:: + + $ ceph fs subvolume pin <vol_name> <group_name> <pin_type> <pin_setting> + +Typically you will want to set subvolume group pins. The ``pin_type`` may be +one of ``export``, ``distributed``, or ``random``. The ``pin_setting`` +corresponds to the extended attributed "value" as in the pinning documentation +referenced above. + +So, for example, setting a distributed pinning strategy on a subvolume group:: + + $ ceph fs subvolumegroup pin cephfilesystem-a csi distributed 1 + +Will enable distributed subtree partitioning policy for the "csi" subvolume +group. This will cause every subvolume within the group to be automatically +pinned to one of the available ranks on the file system. + + +.. _manila: https://github.com/openstack/manila +.. _CSI: https://github.com/ceph/ceph-csi |