diff options
Diffstat (limited to '')
| -rw-r--r-- | doc/mgr/influx.rst | 173 |
1 files changed, 173 insertions, 0 deletions
diff --git a/doc/mgr/influx.rst b/doc/mgr/influx.rst new file mode 100644 index 000000000..2622d3919 --- /dev/null +++ b/doc/mgr/influx.rst @@ -0,0 +1,173 @@ +============= +Influx Module +============= + +.. mgr_module:: influx + +The influx module continuously collects and sends time series data to an +influxdb database. + +The influx module was introduced in the 13.x *Mimic* release. + +-------- +Enabling +-------- + +To enable the module, use the following command: + +.. prompt:: bash $ + + ceph mgr module enable influx + +If you wish to subsequently disable the module, you can use the equivalent +*disable* command: + +.. prompt:: bash $ + + ceph mgr module disable influx + +------------- +Configuration +------------- + +For the influx module to send statistics to an InfluxDB server, it +is necessary to configure the servers address and some authentication +credentials. + +Set configuration values using the following command: + +.. prompt:: bash $ + + ceph config set mgr mgr/influx/<key> <value> + + +The most important settings are :confval:`mgr/influx/hostname`, +:confval:`mgr/influx/username` and :confval:`mgr/influx/password`. +For example, a typical configuration might look like this: + +.. prompt:: bash $ + + ceph config set mgr mgr/influx/hostname influx.mydomain.com + ceph config set mgr mgr/influx/username admin123 + ceph config set mgr mgr/influx/password p4ssw0rd + +Following is the list of all configuration settings: + +.. confval:: hostname +.. confval:: username +.. confval:: password +.. confval:: interval +.. confval:: database +.. confval:: port +.. confval:: ssl +.. confval:: verify_ssl +.. confval:: threads +.. confval:: batch_size + +--------- +Debugging +--------- + +By default, a few debugging statements as well as error statements have been set to print in the log files. Users can add more if necessary. +To make use of the debugging option in the module: + +- Add this to the ceph.conf file. + + .. code-block:: ini + + [mgr] + debug_mgr = 20 + +- Use this command ``ceph influx self-test``. +- Check the log files. Users may find it easier to filter the log files using *mgr[influx]*. + +-------------------- +Interesting counters +-------------------- + +The following tables describe a subset of the values output by +this module. + +^^^^^ +Pools +^^^^^ + ++---------------+-----------------------------------------------------+ +|Counter | Description | ++===============+=====================================================+ +|stored | Bytes stored in the pool not including copies | ++---------------+-----------------------------------------------------+ +|max_avail | Max available number of bytes in the pool | ++---------------+-----------------------------------------------------+ +|objects | Number of objects in the pool | ++---------------+-----------------------------------------------------+ +|wr_bytes | Number of bytes written in the pool | ++---------------+-----------------------------------------------------+ +|dirty | Number of bytes dirty in the pool | ++---------------+-----------------------------------------------------+ +|rd_bytes | Number of bytes read in the pool | ++---------------+-----------------------------------------------------+ +|stored_raw | Bytes used in pool including copies made | ++---------------+-----------------------------------------------------+ + +^^^^ +OSDs +^^^^ + ++------------+------------------------------------+ +|Counter | Description | ++============+====================================+ +|op_w | Client write operations | ++------------+------------------------------------+ +|op_in_bytes | Client operations total write size | ++------------+------------------------------------+ +|op_r | Client read operations | ++------------+------------------------------------+ +|op_out_bytes| Client operations total read size | ++------------+------------------------------------+ + + ++------------------------+--------------------------------------------------------------------------+ +|Counter | Description | ++========================+==========================================================================+ +|op_wip | Replication operations currently being processed (primary) | ++------------------------+--------------------------------------------------------------------------+ +|op_latency | Latency of client operations (including queue time) | ++------------------------+--------------------------------------------------------------------------+ +|op_process_latency | Latency of client operations (excluding queue time) | ++------------------------+--------------------------------------------------------------------------+ +|op_prepare_latency | Latency of client operations (excluding queue time and wait for finished)| ++------------------------+--------------------------------------------------------------------------+ +|op_r_latency | Latency of read operation (including queue time) | ++------------------------+--------------------------------------------------------------------------+ +|op_r_process_latency | Latency of read operation (excluding queue time) | ++------------------------+--------------------------------------------------------------------------+ +|op_w_in_bytes | Client data written | ++------------------------+--------------------------------------------------------------------------+ +|op_w_latency | Latency of write operation (including queue time) | ++------------------------+--------------------------------------------------------------------------+ +|op_w_process_latency | Latency of write operation (excluding queue time) | ++------------------------+--------------------------------------------------------------------------+ +|op_w_prepare_latency | Latency of write operations (excluding queue time and wait for finished) | ++------------------------+--------------------------------------------------------------------------+ +|op_rw | Client read-modify-write operations | ++------------------------+--------------------------------------------------------------------------+ +|op_rw_in_bytes | Client read-modify-write operations write in | ++------------------------+--------------------------------------------------------------------------+ +|op_rw_out_bytes | Client read-modify-write operations read out | ++------------------------+--------------------------------------------------------------------------+ +|op_rw_latency | Latency of read-modify-write operation (including queue time) | ++------------------------+--------------------------------------------------------------------------+ +|op_rw_process_latency | Latency of read-modify-write operation (excluding queue time) | ++------------------------+--------------------------------------------------------------------------+ +|op_rw_prepare_latency | Latency of read-modify-write operations (excluding queue time | +| | and wait for finished) | ++------------------------+--------------------------------------------------------------------------+ +|op_before_queue_op_lat | Latency of IO before calling queue (before really queue into ShardedOpWq)| +| | op_before_dequeue_op_lat | ++------------------------+--------------------------------------------------------------------------+ +|op_before_dequeue_op_lat| Latency of IO before calling dequeue_op(already dequeued and get PG lock)| ++------------------------+--------------------------------------------------------------------------+ + +Latency counters are measured in microseconds unless otherwise specified in the description. + |