diff options
Diffstat (limited to '')
| -rw-r--r-- | doc/rados/configuration/filestore-config-ref.rst | 377 |
1 files changed, 377 insertions, 0 deletions
diff --git a/doc/rados/configuration/filestore-config-ref.rst b/doc/rados/configuration/filestore-config-ref.rst new file mode 100644 index 000000000..7aefe26b3 --- /dev/null +++ b/doc/rados/configuration/filestore-config-ref.rst @@ -0,0 +1,377 @@ +============================ + Filestore Config Reference +============================ + +.. note:: Since the Luminous release of Ceph, Filestore has not been Ceph's + default storage back end. Since the Luminous release of Ceph, BlueStore has + been Ceph's default storage back end. However, Filestore OSDs are still + supported up to Quincy. Filestore OSDs are not supported in Reef. See + :ref:`OSD Back Ends <rados_config_storage_devices_osd_backends>`. See + :ref:`BlueStore Migration <rados_operations_bluestore_migration>` for + instructions explaining how to replace an existing Filestore back end with a + BlueStore back end. + + +``filestore_debug_omap_check`` + +:Description: Debugging check on synchronization. Expensive. For debugging only. +:Type: Boolean +:Required: No +:Default: ``false`` + + +.. index:: filestore; extended attributes + +Extended Attributes +=================== + +Extended Attributes (XATTRs) are important for Filestore OSDs. However, Certain +disadvantages can occur when the underlying file system is used for the storage +of XATTRs: some file systems have limits on the number of bytes that can be +stored in XATTRs, and your file system might in some cases therefore run slower +than would an alternative method of storing XATTRs. For this reason, a method +of storing XATTRs extrinsic to the underlying file system might improve +performance. To implement such an extrinsic method, refer to the following +settings. + +If the underlying file system has no size limit, then Ceph XATTRs are stored as +``inline xattr``, using the XATTRs provided by the file system. But if there is +a size limit (for example, ext4 imposes a limit of 4 KB total), then some Ceph +XATTRs will be stored in a key/value database when the limit is reached. More +precisely, this begins to occur when either the +``filestore_max_inline_xattr_size`` or ``filestore_max_inline_xattrs`` +threshold is reached. + + +``filestore_max_inline_xattr_size`` + +:Description: Defines the maximum size per object of an XATTR that can be + stored in the file system (for example, XFS, Btrfs, ext4). The + specified size should not be larger than the file system can + handle. Using the default value of 0 instructs Filestore to use + the value specific to the file system. +:Type: Unsigned 32-bit Integer +:Required: No +:Default: ``0`` + + +``filestore_max_inline_xattr_size_xfs`` + +:Description: Defines the maximum size of an XATTR that can be stored in the + XFS file system. This setting is used only if + ``filestore_max_inline_xattr_size`` == 0. +:Type: Unsigned 32-bit Integer +:Required: No +:Default: ``65536`` + + +``filestore_max_inline_xattr_size_btrfs`` + +:Description: Defines the maximum size of an XATTR that can be stored in the + Btrfs file system. This setting is used only if + ``filestore_max_inline_xattr_size`` == 0. +:Type: Unsigned 32-bit Integer +:Required: No +:Default: ``2048`` + + +``filestore_max_inline_xattr_size_other`` + +:Description: Defines the maximum size of an XATTR that can be stored in other file systems. + This setting is used only if ``filestore_max_inline_xattr_size`` == 0. +:Type: Unsigned 32-bit Integer +:Required: No +:Default: ``512`` + + +``filestore_max_inline_xattrs`` + +:Description: Defines the maximum number of XATTRs per object that can be stored in the file system. + Using the default value of 0 instructs Filestore to use the value specific to the file system. +:Type: 32-bit Integer +:Required: No +:Default: ``0`` + + +``filestore_max_inline_xattrs_xfs`` + +:Description: Defines the maximum number of XATTRs per object that can be stored in the XFS file system. + This setting is used only if ``filestore_max_inline_xattrs`` == 0. +:Type: 32-bit Integer +:Required: No +:Default: ``10`` + + +``filestore_max_inline_xattrs_btrfs`` + +:Description: Defines the maximum number of XATTRs per object that can be stored in the Btrfs file system. + This setting is used only if ``filestore_max_inline_xattrs`` == 0. +:Type: 32-bit Integer +:Required: No +:Default: ``10`` + + +``filestore_max_inline_xattrs_other`` + +:Description: Defines the maximum number of XATTRs per object that can be stored in other file systems. + This setting is used only if ``filestore_max_inline_xattrs`` == 0. +:Type: 32-bit Integer +:Required: No +:Default: ``2`` + +.. index:: filestore; synchronization + +Synchronization Intervals +========================= + +Filestore must periodically quiesce writes and synchronize the file system. +Each synchronization creates a consistent commit point. When the commit point +is created, Filestore is able to free all journal entries up to that point. +More-frequent synchronization tends to reduce both synchronization time and +the amount of data that needs to remain in the journal. Less-frequent +synchronization allows the backing file system to coalesce small writes and +metadata updates, potentially increasing synchronization +efficiency but also potentially increasing tail latency. + + +``filestore_max_sync_interval`` + +:Description: Defines the maximum interval (in seconds) for synchronizing Filestore. +:Type: Double +:Required: No +:Default: ``5`` + + +``filestore_min_sync_interval`` + +:Description: Defines the minimum interval (in seconds) for synchronizing Filestore. +:Type: Double +:Required: No +:Default: ``.01`` + + +.. index:: filestore; flusher + +Flusher +======= + +The Filestore flusher forces data from large writes to be written out using +``sync_file_range`` prior to the synchronization. +Ideally, this action reduces the cost of the eventual synchronization. In practice, however, disabling +'filestore_flusher' seems in some cases to improve performance. + + +``filestore_flusher`` + +:Description: Enables the Filestore flusher. +:Type: Boolean +:Required: No +:Default: ``false`` + +.. deprecated:: v.65 + +``filestore_flusher_max_fds`` + +:Description: Defines the maximum number of file descriptors for the flusher. +:Type: Integer +:Required: No +:Default: ``512`` + +.. deprecated:: v.65 + +``filestore_sync_flush`` + +:Description: Enables the synchronization flusher. +:Type: Boolean +:Required: No +:Default: ``false`` + +.. deprecated:: v.65 + +``filestore_fsync_flushes_journal_data`` + +:Description: Flushes journal data during file-system synchronization. +:Type: Boolean +:Required: No +:Default: ``false`` + + +.. index:: filestore; queue + +Queue +===== + +The following settings define limits on the size of the Filestore queue: + +``filestore_queue_max_ops`` + +:Description: Defines the maximum number of in-progress operations that Filestore accepts before it blocks the queueing of any new operations. +:Type: Integer +:Required: No. Minimal impact on performance. +:Default: ``50`` + + +``filestore_queue_max_bytes`` + +:Description: Defines the maximum number of bytes permitted per operation. +:Type: Integer +:Required: No +:Default: ``100 << 20`` + + +.. index:: filestore; timeouts + +Timeouts +======== + +``filestore_op_threads`` + +:Description: Defines the number of file-system operation threads that execute in parallel. +:Type: Integer +:Required: No +:Default: ``2`` + + +``filestore_op_thread_timeout`` + +:Description: Defines the timeout (in seconds) for a file-system operation thread. +:Type: Integer +:Required: No +:Default: ``60`` + + +``filestore_op_thread_suicide_timeout`` + +:Description: Defines the timeout (in seconds) for a commit operation before the commit is cancelled. +:Type: Integer +:Required: No +:Default: ``180`` + + +.. index:: filestore; btrfs + +B-Tree Filesystem +================= + + +``filestore_btrfs_snap`` + +:Description: Enables snapshots for a ``btrfs`` Filestore. +:Type: Boolean +:Required: No. Used only for ``btrfs``. +:Default: ``true`` + + +``filestore_btrfs_clone_range`` + +:Description: Enables cloning ranges for a ``btrfs`` Filestore. +:Type: Boolean +:Required: No. Used only for ``btrfs``. +:Default: ``true`` + + +.. index:: filestore; journal + +Journal +======= + + +``filestore_journal_parallel`` + +:Description: Enables parallel journaling, default for ``btrfs``. +:Type: Boolean +:Required: No +:Default: ``false`` + + +``filestore_journal_writeahead`` + +:Description: Enables write-ahead journaling, default for XFS. +:Type: Boolean +:Required: No +:Default: ``false`` + + +``filestore_journal_trailing`` + +:Description: Deprecated. **Never use.** +:Type: Boolean +:Required: No +:Default: ``false`` + + +Misc +==== + + +``filestore_merge_threshold`` + +:Description: Defines the minimum number of files permitted in a subdirectory before the subdirectory is merged into its parent directory. + NOTE: A negative value means that subdirectory merging is disabled. +:Type: Integer +:Required: No +:Default: ``-10`` + + +``filestore_split_multiple`` + +:Description: ``(filestore_split_multiple * abs(filestore_merge_threshold) + (rand() % filestore_split_rand_factor)) * 16`` + is the maximum number of files permitted in a subdirectory + before the subdirectory is split into child directories. + +:Type: Integer +:Required: No +:Default: ``2`` + + +``filestore_split_rand_factor`` + +:Description: A random factor added to the split threshold to avoid + too many (expensive) Filestore splits occurring at the same time. + For details, see ``filestore_split_multiple``. + To change this setting for an existing OSD, it is necessary to take the OSD + offline before running the ``ceph-objectstore-tool apply-layout-settings`` command. + +:Type: Unsigned 32-bit Integer +:Required: No +:Default: ``20`` + + +``filestore_update_to`` + +:Description: Limits automatic upgrades to a specified version of Filestore. Useful in cases in which you want to avoid upgrading to a specific version. +:Type: Integer +:Required: No +:Default: ``1000`` + + +``filestore_blackhole`` + +:Description: Drops any new transactions on the floor, similar to redirecting to NULL. +:Type: Boolean +:Required: No +:Default: ``false`` + + +``filestore_dump_file`` + +:Description: Defines the file that transaction dumps are stored on. +:Type: Boolean +:Required: No +:Default: ``false`` + + +``filestore_kill_at`` + +:Description: Injects a failure at the *n*\th opportunity. +:Type: String +:Required: No +:Default: ``false`` + + +``filestore_fail_eio`` + +:Description: Fail/Crash on EIO. +:Type: Boolean +:Required: No +:Default: ``true`` |