summaryrefslogtreecommitdiffstats
path: root/doc/rados/operations/control.rst
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--doc/rados/operations/control.rst665
1 files changed, 665 insertions, 0 deletions
diff --git a/doc/rados/operations/control.rst b/doc/rados/operations/control.rst
new file mode 100644
index 000000000..033f831cd
--- /dev/null
+++ b/doc/rados/operations/control.rst
@@ -0,0 +1,665 @@
+.. index:: control, commands
+
+==================
+ Control Commands
+==================
+
+
+Monitor Commands
+================
+
+To issue monitor commands, use the ``ceph`` utility:
+
+.. prompt:: bash $
+
+ ceph [-m monhost] {command}
+
+In most cases, monitor commands have the following form:
+
+.. prompt:: bash $
+
+ ceph {subsystem} {command}
+
+
+System Commands
+===============
+
+To display the current cluster status, run the following commands:
+
+.. prompt:: bash $
+
+ ceph -s
+ ceph status
+
+To display a running summary of cluster status and major events, run the
+following command:
+
+.. prompt:: bash $
+
+ ceph -w
+
+To display the monitor quorum, including which monitors are participating and
+which one is the leader, run the following commands:
+
+.. prompt:: bash $
+
+ ceph mon stat
+ ceph quorum_status
+
+To query the status of a single monitor, including whether it is in the quorum,
+run the following command:
+
+.. prompt:: bash $
+
+ ceph tell mon.[id] mon_status
+
+Here the value of ``[id]`` can be found by consulting the output of ``ceph
+-s``.
+
+
+Authentication Subsystem
+========================
+
+To add an OSD keyring for a specific OSD, run the following command:
+
+.. prompt:: bash $
+
+ ceph auth add {osd} {--in-file|-i} {path-to-osd-keyring}
+
+To list the cluster's keys and their capabilities, run the following command:
+
+.. prompt:: bash $
+
+ ceph auth ls
+
+
+Placement Group Subsystem
+=========================
+
+To display the statistics for all placement groups (PGs), run the following
+command:
+
+.. prompt:: bash $
+
+ ceph pg dump [--format {format}]
+
+Here the valid formats are ``plain`` (default), ``json`` ``json-pretty``,
+``xml``, and ``xml-pretty``. When implementing monitoring tools and other
+tools, it is best to use the ``json`` format. JSON parsing is more
+deterministic than the ``plain`` format (which is more human readable), and the
+layout is much more consistent from release to release. The ``jq`` utility is
+very useful for extracting data from JSON output.
+
+To display the statistics for all PGs stuck in a specified state, run the
+following command:
+
+.. prompt:: bash $
+
+ ceph pg dump_stuck inactive|unclean|stale|undersized|degraded [--format {format}] [-t|--threshold {seconds}]
+
+Here ``--format`` may be ``plain`` (default), ``json``, ``json-pretty``,
+``xml``, or ``xml-pretty``.
+
+The ``--threshold`` argument determines the time interval (in seconds) for a PG
+to be considered ``stuck`` (default: 300).
+
+PGs might be stuck in any of the following states:
+
+**Inactive**
+
+ PGs are unable to process reads or writes because they are waiting for an
+ OSD that has the most up-to-date data to return to an ``up`` state.
+
+
+**Unclean**
+
+ PGs contain objects that have not been replicated the desired number of
+ times. These PGs have not yet completed the process of recovering.
+
+
+**Stale**
+
+ PGs are in an unknown state, because the OSDs that host them have not
+ reported to the monitor cluster for a certain period of time (specified by
+ the ``mon_osd_report_timeout`` configuration setting).
+
+
+To delete a ``lost`` object or revert an object to its prior state, either by
+reverting it to its previous version or by deleting it because it was just
+created and has no previous version, run the following command:
+
+.. prompt:: bash $
+
+ ceph pg {pgid} mark_unfound_lost revert|delete
+
+
+.. _osd-subsystem:
+
+OSD Subsystem
+=============
+
+To query OSD subsystem status, run the following command:
+
+.. prompt:: bash $
+
+ ceph osd stat
+
+To write a copy of the most recent OSD map to a file (see :ref:`osdmaptool
+<osdmaptool>`), run the following command:
+
+.. prompt:: bash $
+
+ ceph osd getmap -o file
+
+To write a copy of the CRUSH map from the most recent OSD map to a file, run
+the following command:
+
+.. prompt:: bash $
+
+ ceph osd getcrushmap -o file
+
+Note that this command is functionally equivalent to the following two
+commands:
+
+.. prompt:: bash $
+
+ ceph osd getmap -o /tmp/osdmap
+ osdmaptool /tmp/osdmap --export-crush file
+
+To dump the OSD map, run the following command:
+
+.. prompt:: bash $
+
+ ceph osd dump [--format {format}]
+
+The ``--format`` option accepts the following arguments: ``plain`` (default),
+``json``, ``json-pretty``, ``xml``, and ``xml-pretty``. As noted above, JSON is
+the recommended format for tools, scripting, and other forms of automation.
+
+To dump the OSD map as a tree that lists one OSD per line and displays
+information about the weights and states of the OSDs, run the following
+command:
+
+.. prompt:: bash $
+
+ ceph osd tree [--format {format}]
+
+To find out where a specific RADOS object is stored in the system, run a
+command of the following form:
+
+.. prompt:: bash $
+
+ ceph osd map <pool-name> <object-name>
+
+To add or move a new OSD (specified by its ID, name, or weight) to a specific
+CRUSH location, run the following command:
+
+.. prompt:: bash $
+
+ ceph osd crush set {id} {weight} [{loc1} [{loc2} ...]]
+
+To remove an existing OSD from the CRUSH map, run the following command:
+
+.. prompt:: bash $
+
+ ceph osd crush remove {name}
+
+To remove an existing bucket from the CRUSH map, run the following command:
+
+.. prompt:: bash $
+
+ ceph osd crush remove {bucket-name}
+
+To move an existing bucket from one position in the CRUSH hierarchy to another,
+run the following command:
+
+.. prompt:: bash $
+
+ ceph osd crush move {id} {loc1} [{loc2} ...]
+
+To set the CRUSH weight of a specific OSD (specified by ``{name}``) to
+``{weight}``, run the following command:
+
+.. prompt:: bash $
+
+ ceph osd crush reweight {name} {weight}
+
+To mark an OSD as ``lost``, run the following command:
+
+.. prompt:: bash $
+
+ ceph osd lost {id} [--yes-i-really-mean-it]
+
+.. warning::
+ This could result in permanent data loss. Use with caution!
+
+To create a new OSD, run the following command:
+
+.. prompt:: bash $
+
+ ceph osd create [{uuid}]
+
+If no UUID is given as part of this command, the UUID will be set automatically
+when the OSD starts up.
+
+To remove one or more specific OSDs, run the following command:
+
+.. prompt:: bash $
+
+ ceph osd rm [{id}...]
+
+To display the current ``max_osd`` parameter in the OSD map, run the following
+command:
+
+.. prompt:: bash $
+
+ ceph osd getmaxosd
+
+To import a specific CRUSH map, run the following command:
+
+.. prompt:: bash $
+
+ ceph osd setcrushmap -i file
+
+To set the ``max_osd`` parameter in the OSD map, run the following command:
+
+.. prompt:: bash $
+
+ ceph osd setmaxosd
+
+The parameter has a default value of 10000. Most operators will never need to
+adjust it.
+
+To mark a specific OSD ``down``, run the following command:
+
+.. prompt:: bash $
+
+ ceph osd down {osd-num}
+
+To mark a specific OSD ``out`` (so that no data will be allocated to it), run
+the following command:
+
+.. prompt:: bash $
+
+ ceph osd out {osd-num}
+
+To mark a specific OSD ``in`` (so that data will be allocated to it), run the
+following command:
+
+.. prompt:: bash $
+
+ ceph osd in {osd-num}
+
+By using the "pause flags" in the OSD map, you can pause or unpause I/O
+requests. If the flags are set, then no I/O requests will be sent to any OSD.
+When the flags are cleared, then pending I/O requests will be resent. To set or
+clear pause flags, run one of the following commands:
+
+.. prompt:: bash $
+
+ ceph osd pause
+ ceph osd unpause
+
+You can assign an override or ``reweight`` weight value to a specific OSD if
+the normal CRUSH distribution seems to be suboptimal. The weight of an OSD
+helps determine the extent of its I/O requests and data storage: two OSDs with
+the same weight will receive approximately the same number of I/O requests and
+store approximately the same amount of data. The ``ceph osd reweight`` command
+assigns an override weight to an OSD. The weight value is in the range 0 to 1,
+and the command forces CRUSH to relocate a certain amount (1 - ``weight``) of
+the data that would otherwise be on this OSD. The command does not change the
+weights of the buckets above the OSD in the CRUSH map. Using the command is
+merely a corrective measure: for example, if one of your OSDs is at 90% and the
+others are at 50%, you could reduce the outlier weight to correct this
+imbalance. To assign an override weight to a specific OSD, run the following
+command:
+
+.. prompt:: bash $
+
+ ceph osd reweight {osd-num} {weight}
+
+.. note:: Any assigned override reweight value will conflict with the balancer.
+ This means that if the balancer is in use, all override reweight values
+ should be ``1.0000`` in order to avoid suboptimal cluster behavior.
+
+A cluster's OSDs can be reweighted in order to maintain balance if some OSDs
+are being disproportionately utilized. Note that override or ``reweight``
+weights have values relative to one another that default to 1.00000; their
+values are not absolute, and these weights must be distinguished from CRUSH
+weights (which reflect the absolute capacity of a bucket, as measured in TiB).
+To reweight OSDs by utilization, run the following command:
+
+.. prompt:: bash $
+
+ ceph osd reweight-by-utilization [threshold [max_change [max_osds]]] [--no-increasing]
+
+By default, this command adjusts the override weight of OSDs that have ±20% of
+the average utilization, but you can specify a different percentage in the
+``threshold`` argument.
+
+To limit the increment by which any OSD's reweight is to be changed, use the
+``max_change`` argument (default: 0.05). To limit the number of OSDs that are
+to be adjusted, use the ``max_osds`` argument (default: 4). Increasing these
+variables can accelerate the reweighting process, but perhaps at the cost of
+slower client operations (as a result of the increase in data movement).
+
+You can test the ``osd reweight-by-utilization`` command before running it. To
+find out which and how many PGs and OSDs will be affected by a specific use of
+the ``osd reweight-by-utilization`` command, run the following command:
+
+.. prompt:: bash $
+
+ ceph osd test-reweight-by-utilization [threshold [max_change max_osds]] [--no-increasing]
+
+The ``--no-increasing`` option can be added to the ``reweight-by-utilization``
+and ``test-reweight-by-utilization`` commands in order to prevent any override
+weights that are currently less than 1.00000 from being increased. This option
+can be useful in certain circumstances: for example, when you are hastily
+balancing in order to remedy ``full`` or ``nearfull`` OSDs, or when there are
+OSDs being evacuated or slowly brought into service.
+
+Operators of deployments that utilize Nautilus or newer (or later revisions of
+Luminous and Mimic) and that have no pre-Luminous clients might likely instead
+want to enable the `balancer`` module for ``ceph-mgr``.
+
+The blocklist can be modified by adding or removing an IP address or a CIDR
+range. If an address is blocklisted, it will be unable to connect to any OSD.
+If an OSD is contained within an IP address or CIDR range that has been
+blocklisted, the OSD will be unable to perform operations on its peers when it
+acts as a client: such blocked operations include tiering and copy-from
+functionality. To add or remove an IP address or CIDR range to the blocklist,
+run one of the following commands:
+
+.. prompt:: bash $
+
+ ceph osd blocklist ["range"] add ADDRESS[:source_port][/netmask_bits] [TIME]
+ ceph osd blocklist ["range"] rm ADDRESS[:source_port][/netmask_bits]
+
+If you add something to the blocklist with the above ``add`` command, you can
+use the ``TIME`` keyword to specify the length of time (in seconds) that it
+will remain on the blocklist (default: one hour). To add or remove a CIDR
+range, use the ``range`` keyword in the above commands.
+
+Note that these commands are useful primarily in failure testing. Under normal
+conditions, blocklists are maintained automatically and do not need any manual
+intervention.
+
+To create or delete a snapshot of a specific storage pool, run one of the
+following commands:
+
+.. prompt:: bash $
+
+ ceph osd pool mksnap {pool-name} {snap-name}
+ ceph osd pool rmsnap {pool-name} {snap-name}
+
+To create, delete, or rename a specific storage pool, run one of the following
+commands:
+
+.. prompt:: bash $
+
+ ceph osd pool create {pool-name} [pg_num [pgp_num]]
+ ceph osd pool delete {pool-name} [{pool-name} --yes-i-really-really-mean-it]
+ ceph osd pool rename {old-name} {new-name}
+
+To change a pool setting, run the following command:
+
+.. prompt:: bash $
+
+ ceph osd pool set {pool-name} {field} {value}
+
+The following are valid fields:
+
+ * ``size``: The number of copies of data in the pool.
+ * ``pg_num``: The PG number.
+ * ``pgp_num``: The effective number of PGs when calculating placement.
+ * ``crush_rule``: The rule number for mapping placement.
+
+To retrieve the value of a pool setting, run the following command:
+
+.. prompt:: bash $
+
+ ceph osd pool get {pool-name} {field}
+
+Valid fields are:
+
+ * ``pg_num``: The PG number.
+ * ``pgp_num``: The effective number of PGs when calculating placement.
+
+To send a scrub command to a specific OSD, or to all OSDs (by using ``*``), run
+the following command:
+
+.. prompt:: bash $
+
+ ceph osd scrub {osd-num}
+
+To send a repair command to a specific OSD, or to all OSDs (by using ``*``),
+run the following command:
+
+.. prompt:: bash $
+
+ ceph osd repair N
+
+You can run a simple throughput benchmark test against a specific OSD. This
+test writes a total size of ``TOTAL_DATA_BYTES`` (default: 1 GB) incrementally,
+in multiple write requests that each have a size of ``BYTES_PER_WRITE``
+(default: 4 MB). The test is not destructive and it will not overwrite existing
+live OSD data, but it might temporarily affect the performance of clients that
+are concurrently accessing the OSD. To launch this benchmark test, run the
+following command:
+
+.. prompt:: bash $
+
+ ceph tell osd.N bench [TOTAL_DATA_BYTES] [BYTES_PER_WRITE]
+
+To clear the caches of a specific OSD during the interval between one benchmark
+run and another, run the following command:
+
+.. prompt:: bash $
+
+ ceph tell osd.N cache drop
+
+To retrieve the cache statistics of a specific OSD, run the following command:
+
+.. prompt:: bash $
+
+ ceph tell osd.N cache status
+
+MDS Subsystem
+=============
+
+To change the configuration parameters of a running metadata server, run the
+following command:
+
+.. prompt:: bash $
+
+ ceph tell mds.{mds-id} config set {setting} {value}
+
+Example:
+
+.. prompt:: bash $
+
+ ceph tell mds.0 config set debug_ms 1
+
+To enable debug messages, run the following command:
+
+.. prompt:: bash $
+
+ ceph mds stat
+
+To display the status of all metadata servers, run the following command:
+
+.. prompt:: bash $
+
+ ceph mds fail 0
+
+To mark the active metadata server as failed (and to trigger failover to a
+standby if a standby is present), run the following command:
+
+.. todo:: ``ceph mds`` subcommands missing docs: set, dump, getmap, stop, setmap
+
+
+Mon Subsystem
+=============
+
+To display monitor statistics, run the following command:
+
+.. prompt:: bash $
+
+ ceph mon stat
+
+This command returns output similar to the following:
+
+::
+
+ e2: 3 mons at {a=127.0.0.1:40000/0,b=127.0.0.1:40001/0,c=127.0.0.1:40002/0}, election epoch 6, quorum 0,1,2 a,b,c
+
+There is a ``quorum`` list at the end of the output. It lists those monitor
+nodes that are part of the current quorum.
+
+To retrieve this information in a more direct way, run the following command:
+
+.. prompt:: bash $
+
+ ceph quorum_status -f json-pretty
+
+This command returns output similar to the following:
+
+.. code-block:: javascript
+
+ {
+ "election_epoch": 6,
+ "quorum": [
+ 0,
+ 1,
+ 2
+ ],
+ "quorum_names": [
+ "a",
+ "b",
+ "c"
+ ],
+ "quorum_leader_name": "a",
+ "monmap": {
+ "epoch": 2,
+ "fsid": "ba807e74-b64f-4b72-b43f-597dfe60ddbc",
+ "modified": "2016-12-26 14:42:09.288066",
+ "created": "2016-12-26 14:42:03.573585",
+ "features": {
+ "persistent": [
+ "kraken"
+ ],
+ "optional": []
+ },
+ "mons": [
+ {
+ "rank": 0,
+ "name": "a",
+ "addr": "127.0.0.1:40000\/0",
+ "public_addr": "127.0.0.1:40000\/0"
+ },
+ {
+ "rank": 1,
+ "name": "b",
+ "addr": "127.0.0.1:40001\/0",
+ "public_addr": "127.0.0.1:40001\/0"
+ },
+ {
+ "rank": 2,
+ "name": "c",
+ "addr": "127.0.0.1:40002\/0",
+ "public_addr": "127.0.0.1:40002\/0"
+ }
+ ]
+ }
+ }
+
+
+The above will block until a quorum is reached.
+
+To see the status of a specific monitor, run the following command:
+
+.. prompt:: bash $
+
+ ceph tell mon.[name] mon_status
+
+Here the value of ``[name]`` can be found by consulting the output of the
+``ceph quorum_status`` command. This command returns output similar to the
+following:
+
+::
+
+ {
+ "name": "b",
+ "rank": 1,
+ "state": "peon",
+ "election_epoch": 6,
+ "quorum": [
+ 0,
+ 1,
+ 2
+ ],
+ "features": {
+ "required_con": "9025616074522624",
+ "required_mon": [
+ "kraken"
+ ],
+ "quorum_con": "1152921504336314367",
+ "quorum_mon": [
+ "kraken"
+ ]
+ },
+ "outside_quorum": [],
+ "extra_probe_peers": [],
+ "sync_provider": [],
+ "monmap": {
+ "epoch": 2,
+ "fsid": "ba807e74-b64f-4b72-b43f-597dfe60ddbc",
+ "modified": "2016-12-26 14:42:09.288066",
+ "created": "2016-12-26 14:42:03.573585",
+ "features": {
+ "persistent": [
+ "kraken"
+ ],
+ "optional": []
+ },
+ "mons": [
+ {
+ "rank": 0,
+ "name": "a",
+ "addr": "127.0.0.1:40000\/0",
+ "public_addr": "127.0.0.1:40000\/0"
+ },
+ {
+ "rank": 1,
+ "name": "b",
+ "addr": "127.0.0.1:40001\/0",
+ "public_addr": "127.0.0.1:40001\/0"
+ },
+ {
+ "rank": 2,
+ "name": "c",
+ "addr": "127.0.0.1:40002\/0",
+ "public_addr": "127.0.0.1:40002\/0"
+ }
+ ]
+ }
+ }
+
+To see a dump of the monitor state, run the following command:
+
+.. prompt:: bash $
+
+ ceph mon dump
+
+This command returns output similar to the following:
+
+::
+
+ dumped monmap epoch 2
+ epoch 2
+ fsid ba807e74-b64f-4b72-b43f-597dfe60ddbc
+ last_changed 2016-12-26 14:42:09.288066
+ created 2016-12-26 14:42:03.573585
+ 0: 127.0.0.1:40000/0 mon.a
+ 1: 127.0.0.1:40001/0 mon.b
+ 2: 127.0.0.1:40002/0 mon.c
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-22 07:34:15 +0000