summaryrefslogtreecommitdiffstats
path: root/doc/rbd/rbd-persistent-read-only-cache.rst
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--doc/rbd/rbd-persistent-read-only-cache.rst201
1 files changed, 201 insertions, 0 deletions
diff --git a/doc/rbd/rbd-persistent-read-only-cache.rst b/doc/rbd/rbd-persistent-read-only-cache.rst
new file mode 100644
index 000000000..5bef7f592
--- /dev/null
+++ b/doc/rbd/rbd-persistent-read-only-cache.rst
@@ -0,0 +1,201 @@
+===============================
+ RBD Persistent Read-only Cache
+===============================
+
+.. index:: Ceph Block Device; Persistent Read-only Cache
+
+Shared, Read-only Parent Image Cache
+====================================
+
+`Cloned RBD images`_ usually modify only a small fraction of the parent
+image. For example, in a VDI use-case, VMs are cloned from the same
+base image and initially differ only by hostname and IP address. During
+booting, all of these VMs read portions of the same parent
+image data. If we have a local cache of the parent
+image, this speeds up reads on the caching host. We also achieve
+reduction of client-to-cluster network traffic.
+RBD cache must be explicitly enabled in
+``ceph.conf``. The ``ceph-immutable-object-cache`` daemon is responsible for
+caching the parent content on the local disk, and future reads on that data
+will be serviced from the local cache.
+
+.. note:: RBD shared read-only parent image cache requires the Ceph Nautilus release or later.
+
+.. ditaa::
+
+ +--------------------------------------------------------+
+ | QEMU |
+ +--------------------------------------------------------+
+ | librbd (cloned images) |
+ +-------------------+-+----------------------------------+
+ | librados | | ceph--immutable--object--cache |
+ +-------------------+ +----------------------------------+
+ | OSDs/Mons | | local cached parent image |
+ +-------------------+ +----------------------------------+
+
+
+Enable RBD Shared Read-only Parent Image Cache
+----------------------------------------------
+
+To enable RBD shared read-only parent image cache, the following Ceph settings
+need to added in the ``[client]`` `section`_ of your ``ceph.conf`` file::
+
+ rbd parent cache enabled = true
+ rbd plugins = parent_cache
+
+Immutable Object Cache Daemon
+=============================
+
+Introduction and Generic Settings
+---------------------------------
+
+The ``ceph-immutable-object-cache`` daemon is responsible for caching parent
+image content within its local caching directory. Using SSDs as the underlying
+storage is recommended because doing so provides better performance.
+
+The key components of the daemon are:
+
+#. **Domain socket based IPC:** The daemon listens on a local domain socket at
+ startup and waits for connections from librbd clients.
+
+#. **LRU based promotion/demotion policy:** The daemon maintains in-memory
+ statistics of cache hits for each cache file. It demotes the cold cache
+ if capacity reaches the configured threshold.
+
+#. **File-based caching store:** The daemon maintains a simple file-based cache
+ store. On promotion, the RADOS objects are fetched from RADOS cluster and
+ stored in the local caching directory.
+
+When each cloned RBD image is opened, ``librbd`` tries to connect to the cache
+daemon through its Unix domain socket. After ``librbd`` is successfully
+connected, it coordinates with the daemon upon every subsequent read. In the
+case of an uncached read, the daemon promotes the RADOS object to the local
+caching directory and the next read of the object is serviced from the cache.
+The daemon maintains simple LRU statistics, which are used to evict cold cache
+files when required (for example, when the cache is at capacity and under
+pressure).
+
+Here are some important cache configuration settings:
+
+``immutable_object_cache_sock``
+
+:Description: The path to the domain socket used for communication between
+ librbd clients and the ceph-immutable-object-cache daemon.
+:Type: String
+:Required: No
+:Default: ``/var/run/ceph/immutable_object_cache_sock``
+
+
+``immutable_object_cache_path``
+
+:Description: The immutable object cache data directory.
+:Type: String
+:Required: No
+:Default: ``/tmp/ceph_immutable_object_cache``
+
+
+``immutable_object_cache_max_size``
+
+:Description: The max size for immutable cache.
+:Type: Size
+:Required: No
+:Default: ``1G``
+
+
+``immutable_object_cache_watermark``
+
+:Description: The high-water mark for the cache. The value is between (0, 1).
+ If the cache size reaches this threshold the daemon will start
+ to delete cold cache based on LRU statistics.
+:Type: Float
+:Required: No
+:Default: ``0.9``
+
+The ``ceph-immutable-object-cache`` daemon is available within the optional
+``ceph-immutable-object-cache`` distribution package.
+
+.. important:: ``ceph-immutable-object-cache`` daemon requires the ability to
+ connect RADOS clusters.
+
+Running the Immutable Object Cache Daemon
+-----------------------------------------
+
+``ceph-immutable-object-cache`` daemon should use a unique Ceph user ID.
+To `create a Ceph user`_, with ``ceph`` specify the ``auth get-or-create``
+command, user name, monitor caps, and OSD caps::
+
+ ceph auth get-or-create client.ceph-immutable-object-cache.{unique id} mon 'allow r' osd 'profile rbd-read-only'
+
+The ``ceph-immutable-object-cache`` daemon can be managed by ``systemd`` by specifying the user
+ID as the daemon instance::
+
+ systemctl enable ceph-immutable-object-cache@ceph-immutable-object-cache.{unique id}
+
+The ``ceph-immutable-object-cache`` can also be run in foreground by ``ceph-immutable-object-cache`` command::
+
+ ceph-immutable-object-cache -f --log-file={log_path}
+
+QOS Settings
+------------
+
+The immutable object cache supports throttling, controlled by the following settings:
+
+``immutable_object_cache_qos_schedule_tick_min``
+
+:Description: Minimum schedule tick for immutable object cache.
+:Type: Milliseconds
+:Required: No
+:Default: ``50``
+
+
+``immutable_object_cache_qos_iops_limit``
+
+:Description: The desired immutable object cache IO operations limit per second.
+:Type: Unsigned Integer
+:Required: No
+:Default: ``0``
+
+
+``immutable_object_cache_qos_iops_burst``
+
+:Description: The desired burst limit of immutable object cache IO operations.
+:Type: Unsigned Integer
+:Required: No
+:Default: ``0``
+
+
+``immutable_object_cache_qos_iops_burst_seconds``
+
+:Description: The desired burst duration in seconds of immutable object cache IO operations.
+:Type: Seconds
+:Required: No
+:Default: ``1``
+
+
+``immutable_object_cache_qos_bps_limit``
+
+:Description: The desired immutable object cache IO bytes limit per second.
+:Type: Unsigned Integer
+:Required: No
+:Default: ``0``
+
+
+``immutable_object_cache_qos_bps_burst``
+
+:Description: The desired burst limit of immutable object cache IO bytes.
+:Type: Unsigned Integer
+:Required: No
+:Default: ``0``
+
+
+``immutable_object_cache_qos_bps_burst_seconds``
+
+:Description: The desired burst duration in seconds of immutable object cache IO bytes.
+:Type: Seconds
+:Required: No
+:Default: ``1``
+
+.. _Cloned RBD Images: ../rbd-snapshot/#layering
+.. _section: ../../rados/configuration/ceph-conf/#configuration-sections
+.. _create a Ceph user: ../../rados/operations/user-management#add-a-user
+