From e6918187568dbd01842d8d1d2c808ce16a894239 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 21 Apr 2024 13:54:28 +0200 Subject: Adding upstream version 18.2.2. Signed-off-by: Daniel Baumann --- doc/cephfs/eviction.rst | 190 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 190 insertions(+) create mode 100644 doc/cephfs/eviction.rst (limited to 'doc/cephfs/eviction.rst') diff --git a/doc/cephfs/eviction.rst b/doc/cephfs/eviction.rst new file mode 100644 index 000000000..eb6f70a8e --- /dev/null +++ b/doc/cephfs/eviction.rst @@ -0,0 +1,190 @@ + +================================ +Ceph file system client eviction +================================ + +When a file system client is unresponsive or otherwise misbehaving, it +may be necessary to forcibly terminate its access to the file system. This +process is called *eviction*. + +Evicting a CephFS client prevents it from communicating further with MDS +daemons and OSD daemons. If a client was doing buffered IO to the file system, +any un-flushed data will be lost. + +Clients may either be evicted automatically (if they fail to communicate +promptly with the MDS), or manually (by the system administrator). + +The client eviction process applies to clients of all kinds, this includes +FUSE mounts, kernel mounts, nfs-ganesha gateways, and any process using +libcephfs. + +Automatic client eviction +========================= + +There are three situations in which a client may be evicted automatically. + +#. On an active MDS daemon, if a client has not communicated with the MDS for over + ``session_autoclose`` (a file system variable) seconds (300 seconds by + default), then it will be evicted automatically. + +#. On an active MDS daemon, if a client has not responded to cap revoke messages + for over ``mds_cap_revoke_eviction_timeout`` (configuration option) seconds. + This is disabled by default. + +#. During MDS startup (including on failover), the MDS passes through a + state called ``reconnect``. During this state, it waits for all the + clients to connect to the new MDS daemon. If any clients fail to do + so within the time window (``mds_reconnect_timeout``, 45 seconds by default) + then they will be evicted. + +A warning message is sent to the cluster log if either of these situations +arises. + +Manual client eviction +====================== + +Sometimes, the administrator may want to evict a client manually. This +could happen if a client has died and the administrator does not +want to wait for its session to time out, or it could happen if +a client is misbehaving and the administrator does not have access to +the client node to unmount it. + +It is useful to inspect the list of clients first: + +:: + + ceph tell mds.0 client ls + + [ + { + "id": 4305, + "num_leases": 0, + "num_caps": 3, + "state": "open", + "replay_requests": 0, + "completed_requests": 0, + "reconnecting": false, + "inst": "client.4305 172.21.9.34:0/422650892", + "client_metadata": { + "ceph_sha1": "ae81e49d369875ac8b569ff3e3c456a31b8f3af5", + "ceph_version": "ceph version 12.0.0-1934-gae81e49 (ae81e49d369875ac8b569ff3e3c456a31b8f3af5)", + "entity_id": "0", + "hostname": "senta04", + "mount_point": "/tmp/tmpcMpF1b/mnt.0", + "pid": "29377", + "root": "/" + } + } + ] + + + +Once you have identified the client you want to evict, you can +do that using its unique ID, or various other attributes to identify it: + +:: + + # These all work + ceph tell mds.0 client evict id=4305 + ceph tell mds.0 client evict client_metadata.=4305 + + +Advanced: Un-blocklisting a client +================================== + +Ordinarily, a blocklisted client may not reconnect to the servers: it +must be unmounted and then mounted anew. + +However, in some situations it may be useful to permit a client that +was evicted to attempt to reconnect. + +Because CephFS uses the RADOS OSD blocklist to control client eviction, +CephFS clients can be permitted to reconnect by removing them from +the blocklist: + +:: + + $ ceph osd blocklist ls + listed 1 entries + 127.0.0.1:0/3710147553 2018-03-19 11:32:24.716146 + $ ceph osd blocklist rm 127.0.0.1:0/3710147553 + un-blocklisting 127.0.0.1:0/3710147553 + + +Doing this may put data integrity at risk if other clients have accessed +files that the blocklisted client was doing buffered IO to. It is also not +guaranteed to result in a fully functional client -- the best way to get +a fully healthy client back after an eviction is to unmount the client +and do a fresh mount. + +If you are trying to reconnect clients in this way, you may also +find it useful to set ``client_reconnect_stale`` to true in the +FUSE client, to prompt the client to try to reconnect. + +Advanced: Configuring blocklisting +================================== + +If you are experiencing frequent client evictions, due to slow +client hosts or an unreliable network, and you cannot fix the underlying +issue, then you may want to ask the MDS to be less strict. + +It is possible to respond to slow clients by simply dropping their +MDS sessions, but permit them to re-open sessions and permit them +to continue talking to OSDs. To enable this mode, set +``mds_session_blocklist_on_timeout`` to false on your MDS nodes. + +For the equivalent behaviour on manual evictions, set +``mds_session_blocklist_on_evict`` to false. + +Note that if blocklisting is disabled, then evicting a client will +only have an effect on the MDS you send the command to. On a system +with multiple active MDS daemons, you would need to send an +eviction command to each active daemon. When blocklisting is enabled +(the default), sending an eviction command to just a single +MDS is sufficient, because the blocklist propagates it to the others. + +.. _background_blocklisting_and_osd_epoch_barrier: + +Background: Blocklisting and OSD epoch barrier +============================================== + +After a client is blocklisted, it is necessary to make sure that +other clients and MDS daemons have the latest OSDMap (including +the blocklist entry) before they try to access any data objects +that the blocklisted client might have been accessing. + +This is ensured using an internal "osdmap epoch barrier" mechanism. + +The purpose of the barrier is to ensure that when we hand out any +capabilities which might allow touching the same RADOS objects, the +clients we hand out the capabilities to must have a sufficiently recent +OSD map to not race with cancelled operations (from ENOSPC) or +blocklisted clients (from evictions). + +More specifically, the cases where an epoch barrier is set are: + + * Client eviction (where the client is blocklisted and other clients + must wait for a post-blocklist epoch to touch the same objects). + * OSD map full flag handling in the client (where the client may + cancel some OSD ops from a pre-full epoch, so other clients must + wait until the full epoch or later before touching the same objects). + * MDS startup, because we don't persist the barrier epoch, so must + assume that latest OSD map is always required after a restart. + +Note that this is a global value for simplicity. We could maintain this on +a per-inode basis. But we don't, because: + + * It would be more complicated. + * It would use an extra 4 bytes of memory for every inode. + * It would not be much more efficient as, almost always, everyone has + the latest OSD map. And, in most cases everyone will breeze through this + barrier rather than waiting. + * This barrier is done in very rare cases, so any benefit from per-inode + granularity would only very rarely be seen. + +The epoch barrier is transmitted along with all capability messages, and +instructs the receiver of the message to avoid sending any more RADOS +operations to OSDs until it has seen this OSD epoch. This mainly applies +to clients (doing their data writes directly to files), but also applies +to the MDS because things like file size probing and file deletion are +done directly from the MDS. -- cgit v1.2.3