Running Unit Tests ================== How to run s3-tests locally --------------------------- RGW code can be tested by building Ceph locally from source, starting a vstart cluster, and running the "s3-tests" suite against it. The following instructions should work on jewel and above. Step 1 - build Ceph ^^^^^^^^^^^^^^^^^^^ Refer to :doc:`/install/build-ceph`. You can do step 2 separately while it is building. Step 2 - vstart ^^^^^^^^^^^^^^^ When the build completes, and still in the top-level directory of the git clone where you built Ceph, do the following, for cmake builds:: cd build/ RGW=1 ../src/vstart.sh -n This will produce a lot of output as the vstart cluster is started up. At the end you should see a message like:: started. stop.sh to stop. see out/* (e.g. 'tail -f out/????') for debug output. This means the cluster is running. Step 3 - run s3-tests ^^^^^^^^^^^^^^^^^^^^^ .. highlight:: console To run the s3tests suite do the following:: $ ../qa/workunits/rgw/run-s3tests.sh Running test using vstart_runner.py ----------------------------------- CephFS and Ceph Manager code is be tested using `vstart_runner.py`_. Running your first test ^^^^^^^^^^^^^^^^^^^^^^^^^^ The Python tests in Ceph repository can be executed on your local machine using `vstart_runner.py`_. To do that, you'd need `teuthology`_ installed:: $ virtualenv --python=python3 venv $ source venv/bin/activate $ pip install 'setuptools >= 12' $ pip install teuthology[test]@git+https://github.com/ceph/teuthology $ deactivate The above steps installs teuthology in a virtual environment. Before running a test locally, build Ceph successfully from the source (refer :doc:`/install/build-ceph`) and do:: $ cd build $ ../src/vstart.sh -n -d -l $ source ~/path/to/teuthology/venv/bin/activate To run a specific test, say `test_reconnect_timeout`_ from `TestClientRecovery`_ in ``qa/tasks/cephfs/test_client_recovery``, you can do:: $ python ../qa/tasks/vstart_runner.py tasks.cephfs.test_client_recovery.TestClientRecovery.test_reconnect_timeout The above command runs vstart_runner.py and passes the test to be executed as an argument to vstart_runner.py. In a similar way, you can also run the group of tests in the following manner:: $ # run all tests in class TestClientRecovery $ python ../qa/tasks/vstart_runner.py tasks.cephfs.test_client_recovery.TestClientRecovery $ # run all tests in test_client_recovery.py $ python ../qa/tasks/vstart_runner.py tasks.cephfs.test_client_recovery Based on the argument passed, vstart_runner.py collects tests and executes as it would execute a single test. vstart_runner.py can take the following options - --clear-old-log deletes old log file before running the test --create create Ceph cluster before running a test --create-cluster-only creates the cluster and quits; tests can be issued later --interactive drops a Python shell when a test fails --log-ps-output logs ps output; might be useful while debugging --teardown tears Ceph cluster down after test(s) has finished running --kclient use the kernel cephfs client instead of FUSE --brxnet= specify a new net/mask for the mount clients' network namespace container (Default: 192.168.0.0/16) .. note:: If using the FUSE client, ensure that the fuse package is installed and enabled on the system and that ``user_allow_other`` is added to ``/etc/fuse.conf``. .. note:: If using the kernel client, the user must have the ability to run commands with passwordless sudo access. .. note:: A failure on the kernel client may crash the host, so it's recommended to use this functionality within a virtual machine. Internal working of vstart_runner.py - ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ vstart_runner.py primarily does three things - * collects and runs the tests vstart_runner.py setups/teardowns the cluster and collects and runs the test. This is implemented using methods ``scan_tests()``, ``load_tests()`` and ``exec_test()``. This is where all the options that vstart_runner.py takes are implemented along with other features like logging and copying the traceback to the bottom of the log. * provides an interface for issuing and testing shell commands The tests are written assuming that the cluster exists on remote machines. vstart_runner.py provides an interface to run the same tests with the cluster that exists within the local machine. This is done using the class ``LocalRemote``. Class ``LocalRemoteProcess`` can manage the process that executes the commands from ``LocalRemote``, class ``LocalDaemon`` provides an interface to handle Ceph daemons and class ``LocalFuseMount`` can create and handle FUSE mounts. * provides an interface to operate Ceph cluster ``LocalCephManager`` provides methods to run Ceph cluster commands with and without admin socket and ``LocalCephCluster`` provides methods to set or clear ``ceph.conf``. .. note:: vstart_runner.py deletes "adjust-ulimits" and "ceph-coverage" from the command arguments unconditionally since they are not applicable when tests are run on a developer's machine. .. note:: "omit_sudo" is re-set to False unconditionally in cases of commands "passwd" and "chown". .. note:: The presence of binary file named after the first argument is checked in ``/build/bin/``. If present, the first argument is replaced with the path to binary file. Running Workunits Using vstart_enviroment.sh -------------------------------------------- Code can be tested by building Ceph locally from source, starting a vstart cluster, and running any suite against it. Similar to S3-Tests, other workunits can be run against by configuring your environment. Set up the environment ^^^^^^^^^^^^^^^^^^^^^^ Configure your environment:: $ . ./build/vstart_enviroment.sh Running a test ^^^^^^^^^^^^^^ To run a workunit (e.g ``mon/osd.sh``) do the following:: $ ./qa/workunits/mon/osd.sh .. _test_reconnect_timeout: https://github.com/ceph/ceph/blob/master/qa/tasks/cephfs/test_client_recovery.py#L133 .. _TestClientRecovery: https://github.com/ceph/ceph/blob/master/qa/tasks/cephfs/test_client_recovery.py#L86 .. _teuthology: https://github.com/ceph/teuthology .. _vstart_runner.py: https://github.com/ceph/ceph/blob/master/qa/tasks/vstart_runner.py