============================== Manual Deployment on FreeBSD ============================== This a largely a copy of the regular Manual Deployment with FreeBSD specifics. The difference lies in two parts: The underlying diskformat, and the way to use the tools. All Ceph clusters require at least one monitor, and at least as many OSDs as copies of an object stored on the cluster. Bootstrapping the initial monitor(s) is the first step in deploying a Ceph Storage Cluster. Monitor deployment also sets important criteria for the entire cluster, such as the number of replicas for pools, the number of placement groups per OSD, the heartbeat intervals, whether authentication is required, etc. Most of these values are set by default, so it's useful to know about them when setting up your cluster for production. We will set up a cluster with ``node1`` as the monitor node, and ``node2`` and ``node3`` for OSD nodes. .. ditaa:: /------------------\ /----------------\ | Admin Node | | node1 | | +-------->+ | | | | cCCC | \---------+--------/ \----------------/ | | /----------------\ | | node2 | +----------------->+ | | | cCCC | | \----------------/ | | /----------------\ | | node3 | +----------------->| | | cCCC | \----------------/ Disklayout on FreeBSD ===================== Current implementation works on ZFS pools * All Ceph data is created in /var/lib/ceph * Log files go into /var/log/ceph * PID files go into /var/log/run * One ZFS pool is allocated per OSD, like:: gpart create -s GPT ada1 gpart add -t freebsd-zfs -l osd.1 ada1 zpool create -m /var/lib/ceph/osd/osd.1 osd.1 gpt/osd.1 * Some cache and log (ZIL) can be attached. Please note that this is different from the Ceph journals. Cache and log are totally transparent for Ceph, and help the file system to keep the system consistent and help performance. Assuming that ada2 is an SSD:: gpart create -s GPT ada2 gpart add -t freebsd-zfs -l osd.1-log -s 1G ada2 zpool add osd.1 log gpt/osd.1-log gpart add -t freebsd-zfs -l osd.1-cache -s 10G ada2 zpool add osd.1 log gpt/osd.1-cache * Note: *UFS2 does not allow large xattribs* Configuration ------------- As per FreeBSD default parts of extra software go into ``/usr/local/``. Which means that for ``/etc/ceph.conf`` the default location is ``/usr/local/etc/ceph/ceph.conf``. Smartest thing to do is to create a softlink from ``/etc/ceph`` to ``/usr/local/etc/ceph``:: ln -s /usr/local/etc/ceph /etc/ceph A sample file is provided in ``/usr/local/share/doc/ceph/sample.ceph.conf`` Note that ``/usr/local/etc/ceph/ceph.conf`` will be found by most tools, linking it to ``/etc/ceph/ceph.conf`` will help with any scripts that are found in extra tools, scripts, and/or discussionlists. Monitor Bootstrapping ===================== Bootstrapping a monitor (a Ceph Storage Cluster, in theory) requires a number of things: - **Unique Identifier:** The ``fsid`` is a unique identifier for the cluster, and stands for File System ID from the days when the Ceph Storage Cluster was principally for the Ceph File System. Ceph now supports native interfaces, block devices, and object storage gateway interfaces too, so ``fsid`` is a bit of a misnomer. - **Cluster Name:** Ceph clusters have a cluster name, which is a simple string without spaces. The default cluster name is ``ceph``, but you may specify a different cluster name. Overriding the default cluster name is especially useful when you are working with multiple clusters and you need to clearly understand which cluster your are working with. For example, when you run multiple clusters in a :ref:`multisite configuration `, the cluster name (e.g., ``us-west``, ``us-east``) identifies the cluster for the current CLI session. **Note:** To identify the cluster name on the command line interface, specify the a Ceph configuration file with the cluster name (e.g., ``ceph.conf``, ``us-west.conf``, ``us-east.conf``, etc.). Also see CLI usage (``ceph --cluster {cluster-name}``). - **Monitor Name:** Each monitor instance within a cluster has a unique name. In common practice, the Ceph Monitor name is the host name (we recommend one Ceph Monitor per host, and no commingling of Ceph OSD Daemons with Ceph Monitors). You may retrieve the short hostname with ``hostname -s``. - **Monitor Map:** Bootstrapping the initial monitor(s) requires you to generate a monitor map. The monitor map requires the ``fsid``, the cluster name (or uses the default), and at least one host name and its IP address. - **Monitor Keyring**: Monitors communicate with each other via a secret key. You must generate a keyring with a monitor secret and provide it when bootstrapping the initial monitor(s). - **Administrator Keyring**: To use the ``ceph`` CLI tools, you must have a ``client.admin`` user. So you must generate the admin user and keyring, and you must also add the ``client.admin`` user to the monitor keyring. The foregoing requirements do not imply the creation of a Ceph Configuration file. However, as a best practice, we recommend creating a Ceph configuration file and populating it with the ``fsid``, the ``mon initial members`` and the ``mon host`` settings. You can get and set all of the monitor settings at runtime as well. However, a Ceph Configuration file may contain only those settings that override the default values. When you add settings to a Ceph configuration file, these settings override the default settings. Maintaining those settings in a Ceph configuration file makes it easier to maintain your cluster. The procedure is as follows: #. Log in to the initial monitor node(s):: ssh {hostname} For example:: ssh node1 #. Ensure you have a directory for the Ceph configuration file. By default, Ceph uses ``/etc/ceph``. When you install ``ceph``, the installer will create the ``/etc/ceph`` directory automatically. :: ls /etc/ceph #. Create a Ceph configuration file. By default, Ceph uses ``ceph.conf``, where ``ceph`` reflects the cluster name. :: sudo vim /etc/ceph/ceph.conf #. Generate a unique ID (i.e., ``fsid``) for your cluster. :: uuidgen #. Add the unique ID to your Ceph configuration file. :: fsid = {UUID} For example:: fsid = a7f64266-0894-4f1e-a635-d0aeaca0e993 #. Add the initial monitor(s) to your Ceph configuration file. :: mon initial members = {hostname}[,{hostname}] For example:: mon initial members = node1 #. Add the IP address(es) of the initial monitor(s) to your Ceph configuration file and save the file. :: mon host = {ip-address}[,{ip-address}] For example:: mon host = 192.168.0.1 **Note:** You may use IPv6 addresses instead of IPv4 addresses, but you must set ``ms bind ipv6`` to ``true``. See `Network Configuration Reference`_ for details about network configuration. #. Create a keyring for your cluster and generate a monitor secret key. :: ceph-authtool --create-keyring /tmp/ceph.mon.keyring --gen-key -n mon. --cap mon 'allow *' #. Generate an administrator keyring, generate a ``client.admin`` user and add the user to the keyring. :: sudo ceph-authtool --create-keyring /etc/ceph/ceph.client.admin.keyring --gen-key -n client.admin --cap mon 'allow *' --cap osd 'allow *' --cap mds 'allow *' --cap mgr 'allow *' #. Add the ``client.admin`` key to the ``ceph.mon.keyring``. :: ceph-authtool /tmp/ceph.mon.keyring --import-keyring /etc/ceph/ceph.client.admin.keyring #. Generate a monitor map using the hostname(s), host IP address(es) and the FSID. Save it as ``/tmp/monmap``:: monmaptool --create --add {hostname} {ip-address} --fsid {uuid} /tmp/monmap For example:: monmaptool --create --add node1 192.168.0.1 --fsid a7f64266-0894-4f1e-a635-d0aeaca0e993 /tmp/monmap #. Create a default data directory (or directories) on the monitor host(s). :: sudo mkdir /var/lib/ceph/mon/{cluster-name}-{hostname} For example:: sudo mkdir /var/lib/ceph/mon/ceph-node1 See `Monitor Config Reference - Data`_ for details. #. Populate the monitor daemon(s) with the monitor map and keyring. :: sudo -u ceph ceph-mon [--cluster {cluster-name}] --mkfs -i {hostname} --monmap /tmp/monmap --keyring /tmp/ceph.mon.keyring For example:: sudo -u ceph ceph-mon --mkfs -i node1 --monmap /tmp/monmap --keyring /tmp/ceph.mon.keyring #. Consider settings for a Ceph configuration file. Common settings include the following:: [global] fsid = {cluster-id} mon initial members = {hostname}[, {hostname}] mon host = {ip-address}[, {ip-address}] public network = {network}[, {network}] cluster network = {network}[, {network}] auth cluster required = cephx auth service required = cephx auth client required = cephx osd journal size = {n} osd pool default size = {n} # Write an object n times. osd pool default min size = {n} # Allow writing n copy in a degraded state. osd pool default pg num = {n} osd pool default pgp num = {n} osd crush chooseleaf type = {n} In the foregoing example, the ``[global]`` section of the configuration might look like this:: [global] fsid = a7f64266-0894-4f1e-a635-d0aeaca0e993 mon initial members = node1 mon host = 192.168.0.1 public network = 192.168.0.0/24 auth cluster required = cephx auth service required = cephx auth client required = cephx osd journal size = 1024 osd pool default size = 3 osd pool default min size = 2 osd pool default pg num = 333 osd pool default pgp num = 333 osd crush chooseleaf type = 1 #. Touch the ``done`` file. Mark that the monitor is created and ready to be started:: sudo touch /var/lib/ceph/mon/ceph-node1/done #. And for FreeBSD an entry for every monitor needs to be added to the config file. (The requirement will be removed in future releases). The entry should look like:: [mon] [mon.node1] host = node1 # this name can be resolve #. Start the monitor(s). For FreeBSD we use the rc.d init scripts (called bsdrc in Ceph):: sudo service ceph start start mon.node1 For this to work /etc/rc.conf also needs the entry to enable ceph:: cat 'ceph_enable="YES"' >> /etc/rc.conf #. Verify that Ceph created the default pools. :: ceph osd lspools You should see output like this:: 0 data 1 metadata 2 rbd #. Verify that the monitor is running. :: ceph -s You should see output that the monitor you started is up and running, and you should see a health error indicating that placement groups are stuck inactive. It should look something like this:: cluster a7f64266-0894-4f1e-a635-d0aeaca0e993 health HEALTH_ERR 192 pgs stuck inactive; 192 pgs stuck unclean; no osds monmap e1: 1 mons at {node1=192.168.0.1:6789/0}, election epoch 1, quorum 0 node1 osdmap e1: 0 osds: 0 up, 0 in pgmap v2: 192 pgs, 3 pools, 0 bytes data, 0 objects 0 kB used, 0 kB / 0 kB avail 192 creating **Note:** Once you add OSDs and start them, the placement group health errors should disappear. See the next section for details. .. _freebsd_adding_osds: Adding OSDs =========== Once you have your initial monitor(s) running, you should add OSDs. Your cluster cannot reach an ``active + clean`` state until you have enough OSDs to handle the number of copies of an object (e.g., ``osd pool default size = 2`` requires at least two OSDs). After bootstrapping your monitor, your cluster has a default CRUSH map; however, the CRUSH map doesn't have any Ceph OSD Daemons mapped to a Ceph Node. Long Form --------- Without the benefit of any helper utilities, create an OSD and add it to the cluster and CRUSH map with the following procedure. To create the first two OSDs with the long form procedure, execute the following on ``node2`` and ``node3``: #. Connect to the OSD host. :: ssh {node-name} #. Generate a UUID for the OSD. :: uuidgen #. Create the OSD. If no UUID is given, it will be set automatically when the OSD starts up. The following command will output the OSD number, which you will need for subsequent steps. :: ceph osd create [{uuid} [{id}]] #. Create the default directory on your new OSD. :: ssh {new-osd-host} sudo mkdir /var/lib/ceph/osd/{cluster-name}-{osd-number} Above are the ZFS instructions to do this for FreeBSD. #. If the OSD is for a drive other than the OS drive, prepare it for use with Ceph, and mount it to the directory you just created. #. Initialize the OSD data directory. :: ssh {new-osd-host} sudo ceph-osd -i {osd-num} --mkfs --mkkey --osd-uuid [{uuid}] The directory must be empty before you can run ``ceph-osd`` with the ``--mkkey`` option. In addition, the ceph-osd tool requires specification of custom cluster names with the ``--cluster`` option. #. Register the OSD authentication key. The value of ``ceph`` for ``ceph-{osd-num}`` in the path is the ``$cluster-$id``. If your cluster name differs from ``ceph``, use your cluster name instead.:: sudo ceph auth add osd.{osd-num} osd 'allow *' mon 'allow profile osd' -i /var/lib/ceph/osd/{cluster-name}-{osd-num}/keyring #. Add your Ceph Node to the CRUSH map. :: ceph [--cluster {cluster-name}] osd crush add-bucket {hostname} host For example:: ceph osd crush add-bucket node1 host #. Place the Ceph Node under the root ``default``. :: ceph osd crush move node1 root=default #. Add the OSD to the CRUSH map so that it can begin receiving data. You may also decompile the CRUSH map, add the OSD to the device list, add the host as a bucket (if it's not already in the CRUSH map), add the device as an item in the host, assign it a weight, recompile it and set it. :: ceph [--cluster {cluster-name}] osd crush add {id-or-name} {weight} [{bucket-type}={bucket-name} ...] For example:: ceph osd crush add osd.0 1.0 host=node1 #. After you add an OSD to Ceph, the OSD is in your configuration. However, it is not yet running. The OSD is ``down`` and ``in``. You must start your new OSD before it can begin receiving data. For FreeBSD using rc.d init. After adding the OSD to ``ceph.conf``:: sudo service ceph start osd.{osd-num} For example:: sudo service ceph start osd.0 sudo service ceph start osd.1 In this case, to allow the start of the daemon at each reboot you must create an empty file like this:: sudo touch /var/lib/ceph/osd/{cluster-name}-{osd-num}/bsdrc For example:: sudo touch /var/lib/ceph/osd/ceph-0/bsdrc sudo touch /var/lib/ceph/osd/ceph-1/bsdrc Once you start your OSD, it is ``up`` and ``in``. Adding MDS ========== In the below instructions, ``{id}`` is an arbitrary name, such as the hostname of the machine. #. Create the mds data directory.:: mkdir -p /var/lib/ceph/mds/{cluster-name}-{id} #. Create a keyring.:: ceph-authtool --create-keyring /var/lib/ceph/mds/{cluster-name}-{id}/keyring --gen-key -n mds.{id} #. Import the keyring and set caps.:: ceph auth add mds.{id} osd "allow rwx" mds "allow *" mon "allow profile mds" -i /var/lib/ceph/mds/{cluster}-{id}/keyring #. Add to ceph.conf.:: [mds.{id}] host = {id} #. Start the daemon the manual way.:: ceph-mds --cluster {cluster-name} -i {id} -m {mon-hostname}:{mon-port} [-f] #. Start the daemon the right way (using ceph.conf entry).:: service ceph start #. If starting the daemon fails with this error:: mds.-1.0 ERROR: failed to authenticate: (22) Invalid argument Then make sure you do not have a keyring set in ceph.conf in the global section; move it to the client section; or add a keyring setting specific to this mds daemon. And verify that you see the same key in the mds data directory and ``ceph auth get mds.{id}`` output. #. Now you are ready to `create a Ceph file system`_. Summary ======= Once you have your monitor and two OSDs up and running, you can watch the placement groups peer by executing the following:: ceph -w To view the tree, execute the following:: ceph osd tree You should see output that looks something like this:: # id weight type name up/down reweight -1 2 root default -2 2 host node1 0 1 osd.0 up 1 -3 1 host node2 1 1 osd.1 up 1 To add (or remove) additional monitors, see `Add/Remove Monitors`_. To add (or remove) additional Ceph OSD Daemons, see `Add/Remove OSDs`_. .. _Add/Remove Monitors: ../../rados/operations/add-or-rm-mons .. _Add/Remove OSDs: ../../rados/operations/add-or-rm-osds .. _Network Configuration Reference: ../../rados/configuration/network-config-ref .. _Monitor Config Reference - Data: ../../rados/configuration/mon-config-ref#data .. _create a Ceph file system: ../../cephfs/createfs