==================== Bucket Notifications ==================== .. versionadded:: Nautilus .. contents:: Bucket notifications provide a mechanism for sending information out of radosgw when certain events happen on the bucket. Notifications can be sent to HTTP endpoints, AMQP0.9.1 endpoints, and Kafka endpoints. A user can create topics. A topic entity is defined by its name and is "per tenant". A user can associate its topics (via notification configuration) only with buckets it owns. A notification entity must be created in order to send event notifications for a specific bucket. A notification entity can be created either for a subset of event types or for all event types (which is the default). The notification may also filter out events based on matches of the prefixes and suffixes of (1) the keys, (2) the metadata attributes attached to the object, or (3) the object tags. Regular-expression matching can also be used on these to create filters. There can be multiple notifications for any specific topic, and the same topic can used for multiple notifications. REST API has been defined so as to provide configuration and control interfaces for the bucket notification mechanism. .. toctree:: :maxdepth: 1 S3 Bucket Notification Compatibility .. note:: To enable bucket notifications API, the `rgw_enable_apis` configuration parameter should contain: "notifications". Notification Reliability ------------------------ Notifications can be sent synchronously or asynchronously. This section describes the latency and reliability that you should expect for synchronous and asynchronous notifications. Synchronous Notifications ~~~~~~~~~~~~~~~~~~~~~~~~~ Notifications can be sent synchronously, as part of the operation that triggered them. In this mode, the operation is acknowledged (acked) only after the notification is sent to the topic's configured endpoint. This means that the round trip time of the notification (the time it takes to send the notification to the topic's endpoint plus the time it takes to receive the acknowledgement) is added to the latency of the operation itself. .. note:: The original triggering operation is considered successful even if the notification fails with an error, cannot be delivered, or times out. Asynchronous Notifications ~~~~~~~~~~~~~~~~~~~~~~~~~~ Notifications can be sent asynchronously. They are committed into persistent storage and then asynchronously sent to the topic's configured endpoint. In this case, the only latency added to the original operation is the latency added when the notification is committed to persistent storage. .. note:: If the notification fails with an error, cannot be delivered, or times out, it is retried until it is successfully acknowledged. .. tip:: To minimize the latency added by asynchronous notification, we recommended placing the "log" pool on fast media. Topic Management via CLI ------------------------ Fetch the configuration of all topics associated with tenants by running the following command: .. prompt:: bash # radosgw-admin topic list [--tenant={tenant}] Fetch the configuration of a specific topic by running the following command: .. prompt:: bash # radosgw-admin topic get --topic={topic-name} [--tenant={tenant}] Remove a topic by running the following command: .. prompt:: bash # radosgw-admin topic rm --topic={topic-name} [--tenant={tenant}] Notification Performance Statistics ----------------------------------- - ``pubsub_event_triggered``: a running counter of events that have at least one topic associated with them - ``pubsub_event_lost``: a running counter of events that had topics associated with them, but that were not pushed to any of the endpoints - ``pubsub_push_ok``: a running counter, for all notifications, of events successfully pushed to their endpoints - ``pubsub_push_fail``: a running counter, for all notifications, of events that failed to be pushed to their endpoints - ``pubsub_push_pending``: the gauge value of events pushed to an endpoint but not acked or nacked yet .. note:: ``pubsub_event_triggered`` and ``pubsub_event_lost`` are incremented per event on each notification, but ``pubsub_push_ok`` and ``pubsub_push_fail`` are incremented per push action on each notification. Bucket Notification REST API ---------------------------- Topics ~~~~~~ .. note:: In all topic actions, the parameters are URL-encoded and sent in the message body using this content type: ``application/x-www-form-urlencoded``. .. _Create a Topic: Create a Topic `````````````` This creates a new topic. Provide the topic with push endpoint parameters, which will be used later when a notification is created. A response is generated. A successful response includes the topic's `ARN `_ (the "Amazon Resource Name", a unique identifier used to reference the topic). To update a topic, use the same command that you used to create it (but when updating, use the name of an existing topic and different endpoint values). .. tip:: Any notification already associated with the topic must be re-created in order for the topic to update. :: POST Action=CreateTopic &Name= [&Attributes.entry.1.key=amqp-exchange&Attributes.entry.1.value=] [&Attributes.entry.2.key=amqp-ack-level&Attributes.entry.2.value=none|broker|routable] [&Attributes.entry.3.key=verify-ssl&Attributes.entry.3.value=true|false] [&Attributes.entry.4.key=kafka-ack-level&Attributes.entry.4.value=none|broker] [&Attributes.entry.5.key=use-ssl&Attributes.entry.5.value=true|false] [&Attributes.entry.6.key=ca-location&Attributes.entry.6.value=] [&Attributes.entry.7.key=OpaqueData&Attributes.entry.7.value=] [&Attributes.entry.8.key=push-endpoint&Attributes.entry.8.value=] [&Attributes.entry.9.key=persistent&Attributes.entry.9.value=true|false] [&Attributes.entry.10.key=cloudevents&Attributes.entry.10.value=true|false] [&Attributes.entry.11.key=mechanism&Attributes.entry.11.value=] [&Attributes.entry.12.key=time_to_live&Attributes.entry.12.value=] [&Attributes.entry.13.key=max_retries&Attributes.entry.13.value=] [&Attributes.entry.14.key=retry_sleep_duration&Attributes.entry.14.value=] [&Attributes.entry.15.key=Policy&Attributes.entry.15.value=] Request parameters: - push-endpoint: This is the URI of an endpoint to send push notifications to. - OpaqueData: Opaque data is set in the topic configuration and added to all notifications that are triggered by the topic. - persistent: This indicates whether notifications to this endpoint are persistent (=asynchronous) or not persistent. (This is "false" by default.) - HTTP endpoint - URI: ``http[s]://[::@][:][/]`` - user/password: This defaults to "guest/guest". - user/password: This must be provided only over HTTPS. Topic creation requests will otherwise be rejected. - port: This defaults to 5672 for unencrypted connections and 5671 for SSL-encrypted connections. - vhost: This defaults to "/". - verify-ssl: This indicates whether the server certificate is validated by the client. (This is "true" by default.) - If ``ca-location`` is provided and a secure connection is used, the specified CA will be used to authenticate the broker. The default CA will not be used. - amqp-exchange: The exchanges must exist and must be able to route messages based on topics. This parameter is mandatory. - amqp-ack-level: No end2end acking is required. Messages may persist in the broker before being delivered to their final destinations. Three ack methods exist: - "none": The message is considered "delivered" if it is sent to the broker. - "broker": The message is considered "delivered" if it is acked by the broker (default). - "routable": The message is considered "delivered" if the broker can route to a consumer. .. tip:: The topic-name (see :ref:`Create a Topic`) is used for the AMQP topic ("routing key" for a topic exchange). - Kafka endpoint - URI: ``kafka://[:@][: The topic `ARN `_ in the response has the following format: :: arn:aws:sns::: Get Topic Attributes ```````````````````` This returns information about a specific topic. This includes push-endpoint information, if provided. :: POST Action=GetTopicAttributes &TopicArn= The response has the following format: :: User Name EndPoint TopicArn OpaqueData - User: the name of the user that created the topic. - Name: the name of the topic. - EndPoint: The JSON-formatted endpoint parameters, including: - EndpointAddress: The push-endpoint URL. - EndpointArgs: The push-endpoint args. - EndpointTopic: The topic name to be sent to the endpoint (can be different than the above topic name). - HasStoredSecret: This is "true" if the endpoint URL contains user/password information. In this case, the request must be made over HTTPS. The "topic get" request will otherwise be rejected. - Persistent: This is "true" if the topic is persistent. - TopicArn: topic `ARN `_. - OpaqueData: The opaque data set on the topic. Get Topic Information ````````````````````` This returns information about a specific topic. This includes push-endpoint information, if provided. Note that this API is now deprecated in favor of the AWS compliant `GetTopicAttributes` API. :: POST Action=GetTopic &TopicArn= The response has the following format: :: - User: The name of the user that created the topic. - Name: The name of the topic. - EndpointAddress: The push-endpoint URL. - EndpointArgs: The push-endpoint args. - EndpointTopic: The topic name to be sent to the endpoint (which can be different than the above topic name). - HasStoredSecret: This is "true" if the endpoint URL contains user/password information. In this case, the request must be made over HTTPS. The "topic get" request will otherwise be rejected. - Persistent: "true" if topic is persistent. - TopicArn: topic `ARN `_. - OpaqueData: the opaque data set on the topic. Delete Topic ```````````` :: POST Action=DeleteTopic &TopicArn= This deletes the specified topic. .. note:: - Deleting an unknown notification (for example, double delete) is not considered an error. - Deleting a topic does not automatically delete all notifications associated with it. The response has the following format: :: List Topics ``````````` List all topics associated with a tenant. :: POST Action=ListTopics The response has the following format: :: - If the endpoint URL contains user/password information in any part of the topic, the request must be made over HTTPS. The "topic list" request will otherwise be rejected. Notifications ~~~~~~~~~~~~~ Detailed under: `Bucket Operations`_. .. note:: - "Abort Multipart Upload" request does not emit a notification - Both "Initiate Multipart Upload" and "POST Object" requests will emit an ``s3:ObjectCreated:Post`` notification Events ~~~~~~ Events are in JSON format (regardless of the actual endpoint), and are S3-compatible. For example: :: {"Records":[ { "eventVersion":"2.1", "eventSource":"ceph:s3", "awsRegion":"zonegroup1", "eventTime":"2019-11-22T13:47:35.124724Z", "eventName":"ObjectCreated:Put", "userIdentity":{ "principalId":"tester" }, "requestParameters":{ "sourceIPAddress":"" }, "responseElements":{ "x-amz-request-id":"503a4c37-85eb-47cd-8681-2817e80b4281.5330.903595", "x-amz-id-2":"14d2-zone1-zonegroup1" }, "s3":{ "s3SchemaVersion":"1.0", "configurationId":"mynotif1", "bucket":{ "name":"mybucket1", "ownerIdentity":{ "principalId":"tester" }, "arn":"arn:aws:s3:zonegroup1::mybucket1", "id":"503a4c37-85eb-47cd-8681-2817e80b4281.5332.38" }, "object":{ "key":"myimage1.jpg", "size":"1024", "eTag":"37b51d194a7513e45b56f6524f2d51f2", "versionId":"", "sequencer": "F7E6D75DC742D108", "metadata":[], "tags":[] } }, "eventId":"", "opaqueData":"me@example.com" } ]} - awsRegion: The zonegroup. - eventTime: The timestamp, indicating when the event was triggered. - eventName: For the list of supported events see: `S3 Notification Compatibility`_. Note that eventName values do not start with the `s3:` prefix. - userIdentity.principalId: The user that triggered the change. - requestParameters.sourceIPAddress: not supported - responseElements.x-amz-request-id: The request ID of the original change. - responseElements.x_amz_id_2: The RGW on which the change was made. - s3.configurationId: The notification ID that created the event. - s3.bucket.name: The name of the bucket. - s3.bucket.ownerIdentity.principalId: The owner of the bucket. - s3.bucket.arn: The ARN of the bucket. - s3.bucket.id: The ID of the bucket. (This is an extension to the S3 notification API.) - s3.object.key: The object key. - s3.object.size: The object size. - s3.object.eTag: The object etag. - s3.object.versionId: The object version, if the bucket is versioned. When a copy is made, it includes the version of the target object. When a delete marker is created, it includes the version of the delete marker. - s3.object.sequencer: The monotonically-increasing identifier of the "change per object" (hexadecimal format). - s3.object.metadata: Any metadata set on the object that is sent as ``x-amz-meta-`` (that is, any metadata set on the object that is sent as an extension to the S3 notification API). - s3.object.tags: Any tags set on the object. (This is an extension to the S3 notification API.) - s3.eventId: The unique ID of the event, which could be used for acking. (This is an extension to the S3 notification API.) - s3.opaqueData: This means that "opaque data" is set in the topic configuration and is added to all notifications triggered by the topic. (This is an extension to the S3 notification API.) .. _S3 Notification Compatibility: ../s3-notification-compatibility .. _AWS Create Topic: https://docs.aws.amazon.com/sns/latest/api/API_CreateTopic.html .. _Bucket Operations: ../s3/bucketops .. _S3 CloudEvents Spec: https://github.com/cloudevents/spec/blob/main/cloudevents/adapters/aws-s3.md