Adding upstream version 2.5.7.upstream/2.5.7upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 174 insertions, 0 deletions

diff --git a/doc/examples/kea6/global-reservations.json b/doc/examples/kea6/global-reservations.json
new file mode 100644
index 0000000..b98b3e0
--- /dev/null
+++ b/doc/examples/kea6/global-reservations.json
@@ -0,0 +1,174 @@
+// This is an example configuration file for the DHCPv6 server in Kea.
+// It demonstrates how global host reservations can be configured.
+// The global reservations are not associated with any subnet. They
+// are assigned regardless of the subnet to which the DHCP client belongs.
+// Global reservations are assigned to the DHCP clients using the
+// same host identifier types as subnet specific reservations. This file
+// contains multiple examples of host reservations using different
+// identifier types, e.g. DUID, MAC address etc.
+{ "Dhcp6":
+
+{
+// Kea is told to listen on eth0 interface only.
+  "interfaces-config": {
+    "interfaces": [ "eth0" ]
+  },
+
+// We need to specify the database used to store leases. As of
+// June 2022, three database backends are supported: MySQL,
+// PostgreSQL and the in-memory database, Memfile.
+// We'll use memfile because it doesn't require any prior set up.
+  "lease-database": {
+      "type": "memfile",
+      "lfc-interval": 3600
+  },
+
+// This is pretty basic stuff, it has nothing to do with reservations.
+  "preferred-lifetime": 3000,
+  "valid-lifetime": 4000,
+  "renew-timer": 1000,
+  "rebind-timer": 2000,
+
+// Kea supports three types of identifiers in DHCPv6: hw-address (hardware/MAC
+// address of the client), duid (DUID inserted by the client) and flex-id
+// (flexible identifier available when flex_id hook library is loaded) When told
+// to do so, Kea can check for each of these identifier types, but it takes a
+// costly database lookup to do so. It is therefore useful from a performance
+// perspective to use only the reservation types that are actually used in a
+// given network.
+  "host-reservation-identifiers": [ "duid", "hw-address", "flex-id" ],
+
+// This directive tells Kea that reservations are global. Note that this
+// can also be specified at shared network and/or subnet level.
+// "reservation-mode": "global",
+// It is replaced by the "reservations-global", "reservations-in-subnet", and
+// "reservations-out-of-pool" parameters.
+
+// Specify whether the server should look up global reservations.
+  "reservations-global": true,
+
+// Specify whether the server should look up in-subnet reservations.
+  "reservations-in-subnet": false,
+
+// Specify whether the server can assume that all reserved addresses
+// are out-of-pool.
+// Ignored when reservations-in-subnet is false.
+// If specified, it is inherited by "shared-networks" and "subnet6" levels.
+  "reservations-out-of-pool": false,
+
+// Define several global host reservations.
+  "reservations": [
+
+// This is a simple host reservation. The host with DUID matching
+// the specified value will get an address of 2001:db8:1::100.
+// Note it is not recommended but still allowed to reverse addresses at
+// the global scope: as it breaks the link between the reservation and
+// the subnet it can lead to a client localized in another subnet than
+// its address belongs to.
+      {
+          "duid": "01:02:03:04:05:0A:0B:0C:0D:0E",
+          "ip-addresses": [ "2001:db8:1::100" ]
+      },
+
+// This is similar to the previous one, but this time the reservation
+// is done based on hardware/MAC address. The server will do its best to
+// extract the hardware/MAC address from received packets (see
+// 'mac-sources' directive for details). This particular reservation
+// also specifies two extra options to be available for this client. If
+// there are options with the same code specified in a global, subnet or
+// class scope, the values defined at host level take precedence for
+// this particular DHCP client.
+      {
+          "hw-address": "00:01:02:03:04:05",
+          "ip-addresses": [ "2001:db8:1::101" ],
+          "option-data": [
+              {
+                  "name": "dns-servers",
+                  "data": "3000:1::234"
+              },
+              {
+                  "name": "nis-servers",
+                  "data": "3000:1::234"
+              }
+          ],
+          "client-classes": [ "special_snowflake", "office" ]
+      },
+
+// This is a bit more advanced reservation. The client with the specified
+// DUID will get a reserved address, a reserved prefix and a hostname.
+// At least one of the three must be specified in a reservation.
+// Finally, this reservation features vendor specific options for CableLabs,
+// which happen to use enterprise-id 4491. Those particular values will
+// be returned only to the client that has a DUID matching this reservation.
+      {
+          "duid": "01:02:03:04:05:06:07:08:09:0A",
+          "ip-addresses": [ "2001:db8:1:cafe::1" ],
+          "prefixes": [ "2001:db8:2:abcd::/64" ],
+          "hostname": "foo.example.com",
+          "option-data": [
+              {
+                  "name": "vendor-opts",
+                  "data": "4491"
+              },
+              {
+                  "name": "tftp-servers",
+                  "space": "vendor-4491",
+                  "data": "3000:1::234"
+              }
+          ]
+      },
+
+// This reservation is using flexible identifier. Instead of relying
+// on specific field, sysadmin can define an expression similar to what
+// is used for client classification,
+// e.g. substring(relay[0].option[17],0,6). Then, based on the value of
+// that expression for incoming packet, the reservation is matched.
+// Expression can be specified either as hex or plain text using single
+// quotes.
+// Note: flexible identifier requires flex_id hook library to be
+// loaded to work.
+      {
+          "flex-id": "'somevalue'",
+          "ip-addresses": [ "2001:db8:1:cafe::2" ]
+      }
+  ],
+
+// The following list defines subnets. Subnet, pools and interface definitions
+// are the same as in the regular scenario.
+    "subnet6": [
+        {
+            "id": 1,
+
+            "subnet": "2001:db8::/47",
+
+            "pools": [ { "pool": "2001:db8::/64" } ],
+
+            "pd-pools": [
+                {
+                    "prefix": "2001:db8:1:8000::",
+                    "prefix-len": 56,
+                    "delegated-len": 64
+                }
+            ],
+            "interface": "eth0"
+        }
+    ],
+
+// The following configures logging. It assumes that messages with at
+// least informational level (info, warn, error and fatal) should be
+// logged to stdout.
+    "loggers": [
+        {
+            "name": "kea-dhcp6",
+            "output-options": [
+                {
+                    "output": "stdout"
+                }
+            ],
+            "debuglevel": 0,
+            "severity": "INFO"
+        }
+    ]
+}
+
+}