// This is an example configuration file for D2, Kea's DHCP-DDNS processor.
// It uses the GSS-TSIG hook library.
{
"DhcpDdns": {
    // The following parameters are used to receive NCRs (NameChangeRequests)
    // from the local Kea DHCP server. Make sure your kea-dhcp4 and kea-dhcp6
    // matches this.
    "ip-address": "127.0.0.1",
    "port": 53001,
    "dns-server-timeout" : 1000,

    // Forward zone: secure.example.org. It uses GSS-TSIG. It is served
    // by two DNS servers, which listen for DDNS requests at 192.0.2.1
    // and 192.0.2.2.
    "forward-ddns":
    {
        "ddns-domains":
        [
            // DdnsDomain for zone "secure.example.org."
            {
                "name": "secure.example.org.",
                "comment": "DdnsDomain example",
                "dns-servers":
                [
                    {
                      // This server has an entry in gss/servers and
                      // thus will use GSS-TSIG.
                        "ip-address": "192.0.2.1"
                    },
                    {
                      // This server also has an entry there, so will
                      // use GSS-TSIG, too.
                        "ip-address": "192.0.2.2",
                        "port": 5300
                    }
                ]
            }
        ]
    },

    // Reverse zone: we want to update the reverse zone "2.0.192.in-addr.arpa".
    "reverse-ddns":
    {
        "ddns-domains":
        [
            {
                "name": "2.0.192.in-addr.arpa.",
                "dns-servers":
                [
                    {
                        // There is GSS-TSIG definition for this server (see
                        // DhcpDdns/gss-tsig/servers), so it will use
                        // Krb/GSS-TSIG.
                        "ip-address": "192.0.2.1"
                    }
                ]
            }
        ]
    },

    // The GSS-TSIG hook is loaded and its configuration is specified here.
    "hooks-libraries": [
    {
        "library": "/opt/lib/libddns_gss_tsig.so",
        "parameters": {
            // This section governs the GSS-TSIG integration. Each server
            // mentioned in forward-ddns and/or reverse-ddns needs to have
            // an entry here to be able to use GSS-TSIG defaults (optional,
            // if specified they apply to all the GSS-TSIG servers, unless
            // overwritten on specific server level).

            "server-principal": "DNS/server.example.org@EXAMPLE.ORG",
            "client-principal": "DHCP/admin.example.org@EXAMPLE.ORG",

            // client-keytab and credentials-cache can both be used to
            // store client keys. As credentials cache is more flexible,
            // it is recommended to use it. Typically, using both at the
            // same time may cause problems.
            // "client-keytab": "FILE:/etc/dhcp.keytab", // toplevel only
            "credentials-cache": "FILE:/etc/ccache",     // toplevel only

            "gss-replay-flag": true, // GSS anti replay service
            "gss-sequence-flag": false, // no GSS sequence service
            "tkey-lifetime": 3600, // 1 hour
            "rekey-interval": 2700, // 45 minutes
            "retry-interval": 120, // 2 minutes
            "tkey-protocol": "TCP",
            "fallback": false,

            // The list of GSS-TSIG capable servers
            "servers": [
                {
                    // First server (identification is required)
                    "id": "server1",
                    "domain-names": [ ], // if not specified or empty, will
                                         // match all domains that want to
                                         // use this IP+port pair
                    "ip-address": "192.0.2.1",
                    "port": 53,
                    "server-principal": "DNS/server1.example.org@EXAMPLE.ORG",
                    "client-principal": "DHCP/admin1.example.org@EXAMPLE.ORG",
                    "gss-replay-flag": false, // no GSS anti replay service
                    "gss-sequence-flag": false, // no GSS sequence service
                    "tkey-lifetime": 7200, // 2 hours
                    "rekey-interval": 5400, // 90 minutes
                    "retry-interval": 240, // 4 minutes
                    "tkey-protocol": "TCP",
                    "fallback": true // if no key is available fallback to the
                                     // standard behavior (vs skip this server)
                },
                {
                    // The second server (it has most of the parameters missing
                    // as those are using the defaults specified above)
                    "id": "server2",
                    "ip-address": "192.0.2.2",
                    "port": 5300
                }
            ]
        }
    }
    ]

    // Additional parameters, such as logging, control socket and
    // others omitted for clarity.
}

}