From 30d479c28c831a0d4f1fdb54a9e346b0fc176be1 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Wed, 17 Apr 2024 08:23:09 +0200 Subject: Adding upstream version 1.7.2. Signed-off-by: Daniel Baumann --- include/apr_encode.h | 650 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 650 insertions(+) create mode 100644 include/apr_encode.h (limited to 'include/apr_encode.h') diff --git a/include/apr_encode.h b/include/apr_encode.h new file mode 100644 index 0000000..8bae61f --- /dev/null +++ b/include/apr_encode.h @@ -0,0 +1,650 @@ +/* Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed with + * this work for additional information regarding copyright ownership. + * The ASF licenses this file to You under the Apache License, Version 2.0 + * (the "License"); you may not use this file except in compliance with + * the License. You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +/** + * @file apr_encode.h + * @brief APR-UTIL Encoding + */ +#ifndef APR_ENCODE_H +#define APR_ENCODE_H + +#include "apr.h" +#include "apr_general.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * @defgroup APR_Util_Encode Base64/Base64Url/Base32/Base32Hex/Base16 Encoding + * @ingroup APR_Util + * @{ + */ + +/** + * RFC4648 and RFC7515 compliant BASE64, BASE64URL, BASE32, BASE32HEX + * and BASE16 encode/decode functions. + * + * The following encodings are supported: + * + * - Base 64 Encoding + * + * o Use flag APR_ENCODE_NONE + * o https://tools.ietf.org/html/rfc4648#section-4 + * + * - Base 64 Encoding with URL and Filename Safe Alphabet + * + * o Use flag APR_ENCODE_URL + * o https://tools.ietf.org/html/rfc4648#section-5 + * + * - Base 64 URL Encoding without Padding + * + * o Use flag APR_ENCODE_BASE64URL + * o https://tools.ietf.org/html/rfc7515#appendix-C + * + * - Base 32 Encoding + * + * o Use flag APR_ENCODE_NONE + * o https://tools.ietf.org/html/rfc4648#section-6 + * + * - Base 32 Encoding with Extended Hex Alphabet + * + * o Use flag APR_ENCODE_BASE32HEX + * o https://tools.ietf.org/html/rfc4648#section-7 + * + * - Base 16 Encoding + * + * o Use flags APR_ENCODE_NONE/APR_ENCODE_COLON + * o https://tools.ietf.org/html/rfc4648#section-8 + * + * If a non valid character of any kind including whitespace is passed to any + * of the decoder functions, APR_BADCH will be returned. In this case decoding + * will still take place, but the results can not be trusted. + * + * If APR_ENCODE_RELAXED is passed to the decoder functions, decoding will be + * attempted up until the first non valid character. If this results in an + * invalid state in the decoder, such as but not limited to an odd number of + * base16 characters, APR_BADCH will still be returned. + * + * If APR_ENCODE_RELAXED is not passed to a decoder function, the decoding will + * be done in constant time regardless of whether the result returns APR_SUCCESS + * or APR_BADCH. + * + * If the dest parameter is NULL, the maximum theoretical buffer size is + * returned in the len field, including space for a terminating zero character + * if the destination is a string. This value can be used to allocate buffers + * of a suitable safe size. + * + * If the dest parameter is provided, the encoding or decoding will take place, + * and the actual number of characters written is returned in the len field, + * ignoring any terminating zero. + * + * Plain strings are not assumed '\0' terminated unless APR_ENCODE_STRING is + * provided. + * + */ + +/** + * When passing a string to one of the encode functions, this value can be + * passed to indicate a string-valued key, and have the length computed + * automatically. + */ +#define APR_ENCODE_STRING (-1) + +/** + * Generate RFC4648 base16/base32/base64. + */ +#define APR_ENCODE_NONE 0 + +/** + * If relaxed, decode up until the first non base16/base32/base64 character. + */ +#define APR_ENCODE_RELAXED 1 + +/** + * Omit the padding character (=) while encoding. + */ +#define APR_ENCODE_NOPADDING 2 + +/** + * Generate RFC4648 Base 64 Encoding with URL and Filename Safe Alphabet + */ +#define APR_ENCODE_URL 4 + +/** + * Generate RFC7515 BASE64URL + */ +#define APR_ENCODE_BASE64URL (APR_ENCODE_NOPADDING | APR_ENCODE_URL) + +/** + * Generate base32hex encoding instead of base32 encoding + */ +#define APR_ENCODE_BASE32HEX 8 + +/** + * Generate base16 with colons between each token. + */ +#define APR_ENCODE_COLON 16 + +/** + * Generate base16 with lower case characters. + */ +#define APR_ENCODE_LOWER 32 + +/** + * Convert text data to base64. + * @param dest The destination string, can be NULL to output in \c len the + * needed buffer length for encoding. + * @param src The original string, can be NULL if \c dest is NULL and \c slen + * is positive or nul. + * @param slen The length of the original string, or APR_ENCODE_STRING if + * the actual length should be computed based on NUL termination. + * @param flags If APR_ENCODE_NONE, emit RFC4648 Base 64 Encoding. If + * APR_ENCODE_NOPADDING, omit the = padding character. If APR_ENCODE_URL, + * use RFC4648 Base 64 Encoding with URL and Filename Safe Alphabet. + * If APR_ENCODE_BASE64URL, use RFC7515 base64url Encoding. + * @param len If not NULL, outputs the length of the buffer needed for encoding + * (including the trailing NUL) if \c dest is NULL, or the actual length of + * the encoding (excluding the trailing NUL) if \c dest is not NULL. + * @return APR_SUCCESS, or APR_EINVAL if \c slen is not APR_ENCODE_STRING and + * negative, or APR_NOTFOUND if \c dest is not NULL and \c src is NULL, or + * APR_ENOSPC if \c dest is NULL and the source length (based on \c slen or + * APR_ENCODE_STRING) is too big to encode. + */ +APR_DECLARE(apr_status_t) apr_encode_base64(char *dest, const char *src, + apr_ssize_t slen, int flags, apr_size_t * len); + +/** + * Convert binary data to base64. + * @param dest The destination string, can be NULL to output in \c len the + * needed buffer length for encoding. + * @param src The original buffer, can be NULL if \c dest is NULL. + * @param slen The length of the original buffer. + * @param flags If APR_ENCODE_NONE, emit RFC4648 Base 64 Encoding. If + * APR_ENCODE_NOPADDING, omit the = padding character. If APR_ENCODE_URL, + * use RFC4648 Base 64 Encoding with URL and Filename Safe Alphabet. + * If APR_ENCODE_BASE64URL, use RFC7515 base64url Encoding. + * @param len If not NULL, outputs the length of the buffer needed for encoding + * (including the trailing NUL) if \c dest is NULL, or the actual length of + * the encoding (excluding the trailing NUL) if \c dest is not NULL. + * @return APR_SUCCESS, or APR_EINVAL if \c slen is negative, or APR_NOTFOUND + * if \c dest is not NULL and \c src is NULL, or APR_ENOSPC if \c dest is NULL + * and the source length (based on \c slen or APR_ENCODE_STRING) is too big to + * encode. + */ +APR_DECLARE(apr_status_t) apr_encode_base64_binary(char *dest, const unsigned char *src, + apr_ssize_t slen, int flags, apr_size_t * len); + +/** + * Convert text data to base64, and return the results from a pool. + * @param p Pool to allocate from. + * @param src The original string. + * @param slen The length of the original string, or APR_ENCODE_STRING if + * the actual length should be computed based on NUL termination. + * @param flags If APR_ENCODE_NONE, emit RFC4648 Base 64 Encoding. If + * APR_ENCODE_NOPADDING, omit the = padding character. If APR_ENCODE_URL, + * use RFC4648 Base 64 Encoding with URL and Filename Safe Alphabet. + * If APR_ENCODE_BASE64URL, use RFC7515 base64url Encoding. + * @param len If not NULL, outputs the length of the encoding (excluding the + * trailing NUL). + * @return A NUL terminated string allocated from the pool on success, + * or NULL if src is NULL or allocation failed or the encoding is not + * possible (see apr_encode_base64 errors). + */ +APR_DECLARE(const char *)apr_pencode_base64(apr_pool_t * p, const char *src, + apr_ssize_t slen, int flags, apr_size_t * len)__attribute__((nonnull(1))); + +/** + * Convert binary data to base64, and return the results from a pool. + * @param p Pool to allocate from. + * @param src The original buffer. + * @param slen The length of the original buffer. + * @param flags If APR_ENCODE_NONE, emit RFC4648 Base 64 Encoding. If + * APR_ENCODE_NOPADDING, omit the = padding character. If APR_ENCODE_URL, + * use RFC4648 Base 64 Encoding with URL and Filename Safe Alphabet. + * If APR_ENCODE_BASE64URL, use RFC7515 base64url Encoding. + * @param len If not NULL, outputs the length of the encoding (excluding the + * trailing NUL). + * @return A NUL terminated string allocated from the pool on success, + * or NULL if src is NULL or allocation failed or the encoding is not + * possible (see apr_encode_base64_binary errors). + */ +APR_DECLARE(const char *)apr_pencode_base64_binary(apr_pool_t * p, const unsigned char *src, + apr_ssize_t slen, int flags, apr_size_t * len)__attribute__((nonnull(1))); + +/** + * Convert base64 or base64url with or without padding to text data. + * @param dest The destination string, can be NULL to output in \c len the + * needed buffer length for decoding. + * @param src The base64 string, can be NULL if \c dest is NULL and \c slen + * is positive or nul. + * @param slen The length of the base64 string, or APR_ENCODE_STRING if + * the actual length should be computed based on NUL termination. + * @param flags If APR_ENCODE_NONE, attempt to decode the full base64 string, + * and return NULL if any bad character is detected. If APR_ENCODE_RELAXED, + * decode until the first non base64/base64url character. + * @param len If not NULL, outputs the length of the buffer needed for decoding + * (including the trailing NUL) if \c dest is NULL, or the actual length of + * the decoding (excluding the trailing NUL) if \c dest is not NULL. + * @return APR_SUCCESS, or APR_EINVAL if \c slen is not APR_ENCODE_STRING and + * negative, or APR_NOTFOUND if \c dest is not NULL and \c src is NULL, or + * APR_ENOSPC if \c dest is NULL and the source length (based on \c slen or + * APR_ENCODE_STRING) is too big to decode, or APR_EINCOMPLETE if the source + * length (based on \c slen or APR_ENCODE_STRING) is invalid for a base64 + * encoding, or APR_BADCH if a non base64 character is present and + * APR_ENCODE_RELAXED is not specified. + */ +APR_DECLARE(apr_status_t) apr_decode_base64(char *dest, const char *src, + apr_ssize_t slen, int flags, apr_size_t * len); + +/** + * Convert base64 or base64url with or without padding to binary data. + * @param dest The destination string, can be NULL to output in \c len the + * needed buffer length for decoding. + * @param src The base64 string, can be NULL if \c dest is NULL and \c slen + * is positive or nul. + * @param slen The length of the base64 string, or APR_ENCODE_STRING if + * the actual length should be computed based on NUL termination. + * @param flags If APR_ENCODE_NONE, attempt to decode the full base64 string, + * and return NULL if any bad character is detected. If APR_ENCODE_RELAXED, + * decode until the first non base64/base64url character. + * @param len If not NULL, outputs the length of the buffer needed for decoding + * (including the trailing NUL) if \c dest is NULL, or the actual length of + * the decoding (excluding the trailing NUL) if \c dest is not NULL. + * @return APR_SUCCESS, or APR_EINVAL if \c slen is not APR_ENCODE_STRING and + * negative, or APR_NOTFOUND if \c dest is not NULL and \c src is NULL, or + * APR_ENOSPC if \c dest is NULL and the source length (based on \c slen or + * APR_ENCODE_STRING) is too big to decode, or APR_EINCOMPLETE if the source + * length (based on \c slen or APR_ENCODE_STRING) is invalid for a base64 + * encoding, or APR_BADCH if a non base64 character is present and + * APR_ENCODE_RELAXED is not specified. + */ +APR_DECLARE(apr_status_t) apr_decode_base64_binary(unsigned char *dest, + const char *src, apr_ssize_t slen, int flags, apr_size_t * len); + +/** + * Convert base64 or base64url with or without padding to text data, and + * return the results from a pool. + * @param p Pool to allocate from. + * @param src The base64 string to decode. + * @param slen The length of the original string, or APR_ENCODE_STRING if + * the actual length should be computed based on NUL termination. + * @param flags If APR_ENCODE_NONE, attempt to decode the full original buffer, + * and return NULL if any bad character is detected. If APR_ENCODE_RELAXED, + * decode until the first non base64/base64url character. + * @param len If not NULL, outputs the length of the decoding (excluding the + * trailing NUL). + * @return A NUL terminated string allocated from the pool on success, + * or NULL if src is NULL or allocation failed or the decoding is not + * possible (see apr_decode_base64_binary errors). + */ +APR_DECLARE(const char *)apr_pdecode_base64(apr_pool_t * p, const char *src, + apr_ssize_t slen, int flags, apr_size_t * len) + __attribute__((nonnull(1))); + +/** + * Convert base64 or base64url with or without padding to binary data, and + * return the results from a pool. + * @param p Pool to allocate from. + * @param src The base64 string to decode. + * @param slen The length of the original string, or APR_ENCODE_STRING if + * the actual length should be computed based on NUL termination. + * @param flags If APR_ENCODE_NONE, attempt to decode the full original buffer, + * and return NULL if any bad character is detected. If APR_ENCODE_RELAXED, + * decode until the first non base64/base64url character. + * @param len If not NULL, outputs the length of the decoding (excluding the + * trailing NUL). + * @return A NUL terminated string allocated from the pool on success, + * or NULL if src is NULL or allocation failed or the decoding is not + * possible (see apr_decode_base64_binary errors). + */ +APR_DECLARE(const unsigned char *)apr_pdecode_base64_binary(apr_pool_t * p, + const char *src, apr_ssize_t slen, int flags, apr_size_t * len) + __attribute__((nonnull(1))); + +/** + * Convert text data to base32. + * @param dest The destination string, can be NULL to output in \c len the + * needed buffer length for encoding. + * @param src The original string, can be NULL if \c dest is NULL and \c slen + * is positive or nul. + * @param slen The length of the original string, or APR_ENCODE_STRING if + * the actual length should be computed based on NUL termination. + * @param flags If APR_ENCODE_NONE, emit RFC4648 Base 32 Encoding. If + * APR_ENCODE_NOPADDING, omit the = padding character. If APR_ENCODE_BASE32HEX, + * use RFC4648 base32hex Encoding. + * @param len If not NULL, outputs the length of the buffer needed for encoding + * (including the trailing NUL) if \c dest is NULL, or the actual length of + * the encoding (excluding the trailing NUL) if \c dest is not NULL. + * @return APR_SUCCESS, or APR_EINVAL if \c slen is not APR_ENCODE_STRING and + * negative, or APR_NOTFOUND if \c dest is not NULL and \c src is NULL, or + * APR_ENOSPC if \c dest is NULL and the source length (based on \c slen or + * APR_ENCODE_STRING) is too big to encode. + */ +APR_DECLARE(apr_status_t) apr_encode_base32(char *dest, const char *src, + apr_ssize_t slen, int flags, apr_size_t * len); + +/** + * Convert binary data to base32. + * @param dest The destination string, can be NULL to output in \c len the + * needed buffer length for encoding. + * @param src The original buffer, can be NULL if \c dest is NULL. + * @param slen The length of the original buffer. + * @param flags If APR_ENCODE_NONE, emit RFC4648 Base 32 Encoding. If + * APR_ENCODE_NOPADDING, omit the = padding character. If APR_ENCODE_BASE32HEX, + * use RFC4648 base32hex Encoding. + * @param len If not NULL, outputs the length of the buffer needed for encoding + * (including the trailing NUL) if \c dest is NULL, or the actual length of + * the encoding (excluding the trailing NUL) if \c dest is not NULL. + * @return APR_SUCCESS, or APR_EINVAL if \c slen is negative, or APR_NOTFOUND + * if \c dest is not NULL and \c src is NULL, or APR_ENOSPC if \c dest is NULL + * and the source length (based on \c slen or APR_ENCODE_STRING) is too big to + * encode. + */ +APR_DECLARE(apr_status_t) apr_encode_base32_binary(char *dest, const unsigned char *src, + apr_ssize_t slen, int flags, apr_size_t * len); + +/** + * Convert text data to base32, and return the results from a pool. + * @param p Pool to allocate from. + * @param src The original string. + * @param slen The length of the original string, or APR_ENCODE_STRING if + * the actual length should be computed based on NUL termination. + * @param flags If APR_ENCODE_NONE, emit RFC4648 Base 32 Encoding. If + * APR_ENCODE_NOPADDING, omit the = padding character. If APR_ENCODE_BASE32HEX, + * use RFC4648 base32hex Encoding. + * @param len If not NULL, outputs the length of the encoding (excluding the + * trailing NUL). + * @return A NUL terminated string allocated from the pool on success, + * or NULL if src is NULL or allocation failed or the encoding is not + * possible (see apr_encode_base32 errors). + */ +APR_DECLARE(const char *)apr_pencode_base32(apr_pool_t * p, const char *src, + apr_ssize_t slen, int flags, apr_size_t * len) + __attribute__((nonnull(1))); + +/** + * Convert binary data to base32, and return the results from a pool. + * @param p Pool to allocate from. + * @param src The original buffer. + * @param slen The length of the original buffer. + * @param flags If APR_ENCODE_NONE, emit RFC4648 Base 32 Encoding. If + * APR_ENCODE_NOPADDING, omit the = padding character. If APR_ENCODE_BASE32HEX, + * use RFC4648 base32hex Encoding. + * @param len If not NULL, outputs the length of the encoding (excluding the + * trailing NUL). + * @return A NUL terminated string allocated from the pool on success, + * or NULL if src is NULL or allocation failed or the encoding is not + * possible (see apr_encode_base32_binary errors). + */ +APR_DECLARE(const char *)apr_pencode_base32_binary(apr_pool_t * p, const unsigned char *src, + apr_ssize_t slen, int flags, apr_size_t * len) + __attribute__((nonnull(1))); + +/** + * Convert base32 or base32hex with or without padding to text data. + * @param dest The destination string, can be NULL to output in \c len the + * needed buffer length for decoding. + * @param src The base32 string, can be NULL if \c dest is NULL and \c slen + * is positive or nul. + * @param slen The length of the base32 string, or APR_ENCODE_STRING if + * the actual length should be computed based on NUL termination. + * @param flags If APR_ENCODE_NONE, parse RFC4648 Base 32 Encoding. If + * APR_ENCODE_BASE32HEX, use RFC4648 base32hex Encoding. + * @param len If not NULL, outputs the length of the buffer needed for decoding + * (including the trailing NUL) if \c dest is NULL, or the actual length of + * the decoding (excluding the trailing NUL) if \c dest is not NULL. + * @return APR_SUCCESS, or APR_EINVAL if \c slen is not APR_ENCODE_STRING and + * negative, or APR_NOTFOUND if \c dest is not NULL and \c src is NULL, or + * APR_ENOSPC if \c dest is NULL and the source length (based on \c slen or + * APR_ENCODE_STRING) is too big to decode, or APR_EINCOMPLETE if the source + * length (based on \c slen or APR_ENCODE_STRING) is invalid for a base32 + * encoding, or APR_BADCH if a non base32 character is present and + * APR_ENCODE_RELAXED is not specified. + */ +APR_DECLARE(apr_status_t) apr_decode_base32(char *dest, const char *src, + apr_ssize_t slen, int flags, apr_size_t * len); + +/** + * Convert base32 or base32hex with or without padding to binary data. + * @param dest The destination string, can be NULL to output in \c len the + * needed buffer length for decoding. + * @param src The base32 string, can be NULL if \c dest is NULL and \c slen + * is positive or nul. + * @param slen The length of the base32 string, or APR_ENCODE_STRING if + * the actual length should be computed based on NUL termination. + * @param flags If APR_ENCODE_NONE, parse RFC4648 Base 32 Encoding. If + * APR_ENCODE_BASE32HEX, use RFC4648 base32hex Encoding. + * @param len If not NULL, outputs the length of the buffer needed for decoding + * (including the trailing NUL) if \c dest is NULL, or the actual length of + * the decoding (excluding the trailing NUL) if \c dest is not NULL. + * @return APR_SUCCESS, or APR_EINVAL if \c slen is not APR_ENCODE_STRING and + * negative, or APR_NOTFOUND if \c dest is not NULL and \c src is NULL, or + * APR_ENOSPC if \c dest is NULL and the source length (based on \c slen or + * APR_ENCODE_STRING) is too big to decode, or APR_EINCOMPLETE if the source + * length (based on \c slen or APR_ENCODE_STRING) is invalid for a base32 + * encoding, or APR_BADCH if a non base32 character is present and + * APR_ENCODE_RELAXED is not specified. + */ +APR_DECLARE(apr_status_t) apr_decode_base32_binary(unsigned char *dest, + const char *src, apr_ssize_t slen, int flags, apr_size_t * len); + +/** + * Convert base32 or base32hex with or without padding to text data, and + * return the results from a pool. + * @param p Pool to allocate from. + * @param src The base32 string to decode. + * @param slen The length of the original string, or APR_ENCODE_STRING if + * the actual length should be computed based on NUL termination. + * @param flags If APR_ENCODE_NONE, parse RFC4648 Base 32 Encoding. If + * APR_ENCODE_BASE32HEX, use RFC4648 base32hex Encoding. + * @param len If not NULL, outputs the length of the encoding (excluding the + * trailing NUL). + * @return A NUL terminated string allocated from the pool on success, + * or NULL if src is NULL or allocation failed or the decoding is not + * possible (see apr_decode_base32 errors). + */ +APR_DECLARE(const char *)apr_pdecode_base32(apr_pool_t * p, const char *src, + apr_ssize_t slen, int flags, apr_size_t * len) + __attribute__((nonnull(1))); + +/** + * Convert base32 or base32hex with or without padding to binary data, and + * return the results from a pool. + * @param p Pool to allocate from. + * @param src The base32 string to decode. + * @param slen The length of the original string, or APR_ENCODE_STRING if + * the actual length should be computed based on NUL termination. + * @param flags If APR_ENCODE_NONE, parse RFC4648 Base 32 Encoding. If + * APR_ENCODE_BASE32HEX, use RFC4648 base32hex Encoding. + * @param len If not NULL, outputs the length of the encoding (excluding the + * trailing NUL). + * @return A NUL terminated string allocated from the pool on success, + * or NULL if src is NULL or allocation failed or the decoding is not + * possible (see apr_decode_base32_binary errors). + */ +APR_DECLARE(const unsigned char *)apr_pdecode_base32_binary(apr_pool_t * p, + const char *src, apr_ssize_t slen, int flags, apr_size_t * len) + __attribute__((nonnull(1))); + +/** + * Convert text data to base16 (hex). + * @param dest The destination string, can be NULL to output in \c len the + * needed buffer length for encoding. + * @param src The original string, can be NULL if \c dest is NULL and \c slen + * is positive or nul. + * @param slen The length of the original string, or APR_ENCODE_STRING if + * the actual length should be computed based on NUL termination. + * @param flags If APR_ENCODE_NONE, emit RFC4648 Base 16 Encoding. If + * APR_ENCODE_COLON, separate each token with a colon. + * @param len If not NULL, outputs the length of the buffer needed for encoding + * (including the trailing NUL) if \c dest is NULL, or the actual length of + * the encoding (excluding the trailing NUL) if \c dest is not NULL. + * @return APR_SUCCESS, or APR_EINVAL if \c slen is not APR_ENCODE_STRING and + * negative, or APR_NOTFOUND if \c dest is not NULL and \c src is NULL, or + * APR_ENOSPC if \c dest is NULL and the source length (based on \c slen or + * APR_ENCODE_STRING) is too big to encode. + */ +APR_DECLARE(apr_status_t) apr_encode_base16(char *dest, const char *src, + apr_ssize_t slen, int flags, apr_size_t * len); + +/** + * Convert binary data to base16 (hex). + * @param dest The destination string, can be NULL to output in \c len the + * needed buffer length for encoding. + * @param src The original buffer, can be NULL if \c dest is NULL. + * @param slen The length of the original buffer. + * @param flags If APR_ENCODE_NONE, emit RFC4648 Base 16 Encoding. If + * APR_ENCODE_COLON, separate each token with a colon. + * @param len If not NULL, outputs the length of the buffer needed for encoding + * (including the trailing NUL) if \c dest is NULL, or the actual length of + * the encoding (excluding the trailing NUL) if \c dest is not NULL. + * @return APR_SUCCESS, or APR_EINVAL if \c slen is negative, or APR_NOTFOUND + * if \c dest is not NULL and \c src is NULL, or APR_ENOSPC if \c dest is NULL + * and the source length (based on \c slen or APR_ENCODE_STRING) is too big to + * encode. + */ +APR_DECLARE(apr_status_t) apr_encode_base16_binary(char *dest, + const unsigned char *src, apr_ssize_t slen, int flags, + apr_size_t * len); + +/** + * Convert text data to base16 (hex), and return the results from a + * pool. + * @param p Pool to allocate from. + * @param src The original string. + * @param slen The length of the original string, or APR_ENCODE_STRING if + * the actual length should be computed based on NUL termination. + * @param flags If APR_ENCODE_NONE, emit RFC4648 Base 16 Encoding. If + * APR_ENCODE_COLON, separate each token with a colon. + * @param len If not NULL, outputs the length of the encoding (excluding the + * trailing NUL). + * @return A NUL terminated string allocated from the pool on success, + * or NULL if src is NULL or allocation failed or the encoding is not + * possible (see apr_encode_base16 errors). + */ +APR_DECLARE(const char *)apr_pencode_base16(apr_pool_t * p, const char *src, + apr_ssize_t slen, int flags, apr_size_t * len) + __attribute__((nonnull(1))); + +/** + * Convert binary data to base16 (hex), and return the results from a + * pool. + * @param p Pool to allocate from. + * @param src The original buffer. + * @param slen The length of the original buffer. + * @param flags If APR_ENCODE_NONE, emit RFC4648 Base 16 Encoding. If + * APR_ENCODE_COLON, separate each token with a colon. + * @param len If not NULL, outputs the length of the encoding (excluding the + * trailing NUL). + * @return A NUL terminated string allocated from the pool on success, + * or NULL if src is NULL or allocation failed or the encoding is not + * possible (see apr_encode_base16_binary errors). + */ +APR_DECLARE(const char *)apr_pencode_base16_binary(apr_pool_t * p, + const unsigned char *src, apr_ssize_t slen, + int flags, apr_size_t * len)__attribute__((nonnull(1))); + +/** + * Convert base16 (hex) to text data. + * @param dest The destination string, can be NULL to output in \c len the + * needed buffer length for decoding. + * @param src The base16 string, can be NULL if \c dest is NULL and \c slen + * is positive or nul. + * @param slen The length of the base16 string, or APR_ENCODE_STRING if + * the actual length should be computed based on NUL termination. + * @param flags If APR_ENCODE_NONE, parse RFC4648 Base 16 Encoding. If + * APR_ENCODE_COLON, allow tokens to be separated with a colon. + * @param len If not NULL, outputs the length of the buffer needed for decoding + * (including the trailing NUL) if \c dest is NULL, or the actual length of + * the decoding (excluding the trailing NUL) if \c dest is not NULL. + * @return APR_SUCCESS, or APR_EINVAL if \c slen is not APR_ENCODE_STRING and + * negative, or APR_NOTFOUND if \c dest is not NULL and \c src is NULL, or + * APR_ENOSPC if \c dest is NULL and the source length (based on \c slen or + * APR_ENCODE_STRING) is too big to decode, or APR_EINCOMPLETE if the source + * length (based on \c slen or APR_ENCODE_STRING) is invalid for a base16 + * encoding, or APR_BADCH if a non base16 character is present and + * APR_ENCODE_RELAXED is not specified. + */ +APR_DECLARE(apr_status_t) apr_decode_base16(char *dest, const char *src, + apr_ssize_t slen, int flags, apr_size_t * len); + +/** + * Convert base16 (hex) to binary data. + * @param dest The destination string, can be NULL to output in \c len the + * needed buffer length for decoding. + * @param src The base16 string, can be NULL if \c dest is NULL and \c slen + * is positive or nul. + * @param slen The length of the base16 string, or APR_ENCODE_STRING if + * the actual length should be computed based on NUL termination. + * @param flags If APR_ENCODE_NONE, parse RFC4648 Base 16 Encoding. If + * APR_ENCODE_COLON, allow tokens to be separated with a colon. + * @param len If not NULL, outputs the length of the buffer needed for decoding + * (including the trailing NUL) if \c dest is NULL, or the actual length of + * the decoding (excluding the trailing NUL) if \c dest is not NULL. + * @return APR_SUCCESS, or APR_EINVAL if \c slen is not APR_ENCODE_STRING and + * negative, or APR_NOTFOUND if \c dest is not NULL and \c src is NULL, or + * APR_ENOSPC if \c dest is NULL and the source length (based on \c slen or + * APR_ENCODE_STRING) is too big to decode, or APR_EINCOMPLETE if the source + * length (based on \c slen or APR_ENCODE_STRING) is invalid for a base16 + * encoding, or APR_BADCH if a non base16 character is present and + * APR_ENCODE_RELAXED is not specified. + */ +APR_DECLARE(apr_status_t) apr_decode_base16_binary(unsigned char *dest, + const char *src, apr_ssize_t slen, int flags, apr_size_t * len); + +/** + * Convert base16 (hex) and return the results from a pool. + * @param p Pool to allocate from. + * @param src The base16 string to decode. + * @param slen The length of the original string, or APR_ENCODE_STRING if + * the actual length should be computed based on NUL termination. + * @param flags If APR_ENCODE_NONE, parse RFC4648 Base 16 Encoding. If + * APR_ENCODE_COLON, allow tokens to be separated with a colon. + * @param len If not NULL, outputs the length of the encoding (excluding the + * trailing NUL). + * @return A NUL terminated string allocated from the pool on success, + * or NULL if src is NULL or allocation failed or the decoding is not + * possible (see apr_decode_base16 errors). + */ +APR_DECLARE(const char *)apr_pdecode_base16(apr_pool_t * p, const char *src, + apr_ssize_t slen, int flags, apr_size_t * len) + __attribute__((nonnull(1))); + +/** + * Convert base16 (hex) to binary data, and return the results from a pool. + * @param p Pool to allocate from. + * @param src The base16 string to decode. + * @param slen The length of the original string, or APR_ENCODE_STRING if + * the actual length should be computed based on NUL termination. + * @param flags If APR_ENCODE_NONE, parse RFC4648 Base 16 Encoding. If + * APR_ENCODE_COLON, allow tokens to be separated with a colon. + * @param len If not NULL, outputs the length of the encoding (excluding the + * trailing NUL). + * @return A NUL terminated string allocated from the pool on success, + * or NULL if src is NULL or allocation failed or the decoding is not + * possible (see apr_decode_base16_binary errors). + */ +APR_DECLARE(const unsigned char *)apr_pdecode_base16_binary(apr_pool_t * p, + const char *src, apr_ssize_t slen, int flags, apr_size_t * len) + __attribute__((nonnull(1))); + +/** @} */ +#ifdef __cplusplus +} +#endif + +#endif /* !APR_ENCODE_H */ -- cgit v1.2.3