summaryrefslogtreecommitdiffstats
path: root/dselect
diff options
context:
space:
mode:
Diffstat (limited to 'dselect')
-rw-r--r--dselect/CMakeLists.txt4
-rw-r--r--dselect/desc.apt9
-rwxr-xr-xdselect/install111
-rw-r--r--dselect/names1
-rwxr-xr-xdselect/setup286
-rwxr-xr-xdselect/update48
6 files changed, 459 insertions, 0 deletions
diff --git a/dselect/CMakeLists.txt b/dselect/CMakeLists.txt
new file mode 100644
index 0000000..804306e
--- /dev/null
+++ b/dselect/CMakeLists.txt
@@ -0,0 +1,4 @@
+install(PROGRAMS install setup update
+ DESTINATION ${CMAKE_INSTALL_LIBEXECDIR}/dpkg/methods/apt)
+install(FILES desc.apt names
+ DESTINATION ${CMAKE_INSTALL_LIBEXECDIR}/dpkg/methods/apt)
diff --git a/dselect/desc.apt b/dselect/desc.apt
new file mode 100644
index 0000000..5601919
--- /dev/null
+++ b/dselect/desc.apt
@@ -0,0 +1,9 @@
+The APT installation method encompasses most other installation methods
+under the umbrella of the new Package Acquisition code. This method allows
+installation from locations in the filesystem, ftp and http URLs, supports
+full installation ordering and dependency checking as well as multiple
+sources. See the man pages apt-get(8) and sources.list(5)
+
+HTTP proxies can be used by setting http_proxy="http://proxy:port/" before
+running DSelect. FTP proxies require special configuration detailed in
+the apt.conf(5) man page (see /usr/share/doc/apt/examples/apt.conf)
diff --git a/dselect/install b/dselect/install
new file mode 100755
index 0000000..75f0c0f
--- /dev/null
+++ b/dselect/install
@@ -0,0 +1,111 @@
+#!/bin/bash
+
+# Set the textdomain for the translations using $"..."
+TEXTDOMAIN="apt"
+
+# Get the configuration from /etc/apt/apt.conf
+CLEAN="prompt"
+OPTS=""
+DSELECT_UPGRADE_OPTS="-f"
+APTGET="/usr/bin/apt-get"
+DPKG="/usr/bin/dpkg"
+DPKG_OPTS="--admindir=$1"
+APT_OPT0="-oDir::State::status=$1/status"
+APT_OPT1="-oDPkg::Options::=$DPKG_OPTS"
+set -e
+RES=$(apt-config shell CLEAN DSelect::Clean OPTS DSelect::Options \
+ DPKG Dir::Bin::dpkg/f APTGET Dir::Bin::apt-get/f \
+ ARCHIVES Dir::Cache::Archives/d \
+ WAIT DSelect::WaitAfterDownload/b \
+ CHECKDIR DSelect::CheckDir/b)
+eval $RES
+set +e
+
+# Yes/No Prompter
+yesno() {
+# $1 = prompt
+# $2 = default(y)
+ local ans def defp
+ if [ "$2" ];then
+ case $2 in
+ Y|y) defp="[Y/n]" def=y;;
+ N|n) defp="[y/N]" def=n;;
+ *) echo $"Bad default setting!" 1>&2; exit 1;;
+ esac
+ else
+ defp="[y/N]" def=n
+ fi
+ while :;do
+ echo -n "$1 $defp " 1>&3
+ read ans
+ case $ans in
+ Y|y|N|n) break;;
+ "") ans=$def;break;;
+ esac
+ echo
+ done
+ echo $ans | tr YN yn
+}
+
+if [ "$WAIT" = "true" ]; then
+ $APTGET $DSELECT_UPGRADE_OPTS $OPTS "$APT_OPT0" "$APT_OPT1" -d dselect-upgrade
+ echo $"Press [Enter] to continue." && read RES
+ $APTGET $DSELECT_UPGRADE_OPTS $OPTS "$APT_OPT0" "$APT_OPT1" dselect-upgrade
+ RES=$?
+else
+ $APTGET $DSELECT_UPGRADE_OPTS $OPTS "$APT_OPT0" "$APT_OPT1" dselect-upgrade
+ RES=$?
+fi
+
+# 1 means the user choose no at the prompt
+if [ $RES -eq 1 ]; then
+ exit 0
+fi
+
+# Finished OK
+if [ $RES -eq 0 ]; then
+
+ if [ $(ls $ARCHIVES $ARCHIVES/partial | grep -E -v "^lock$|^partial$" | wc -l) \
+ -eq 0 ]; then
+ exit 0
+ fi
+
+ NEWLS=$(ls -ld $ARCHIVES)
+ if [ "$CHECKDIR" = "true" ]; then
+ if [ "$OLDLS" = "$NEWLS" ]; then
+ exit 0
+ fi
+ fi
+
+ # Check the cleaning mode
+ case $(echo $CLEAN | tr '[:upper:]' '[:lower:]') in
+ auto)
+ $APTGET "$APT_OPT0" "$APT_OPT1" autoclean &&
+ echo $"Press [Enter] to continue." && read RES && exit 0;
+ ;;
+ always)
+ $APTGET "$APT_OPT0" "$APT_OPT1" clean &&
+ echo $"Press [Enter] to continue." && read RES && exit 0;
+ ;;
+ prompt)
+ exec 3>&1
+ echo -n $"Do you want to erase any previously downloaded .deb files?"
+ if [ $(yesno "" y) = y ]; then
+ $APTGET "$APT_OPT0" "$APT_OPT1" clean &&
+ echo $"Press [Enter] to continue." && read RES && exit 0;
+ fi
+ ;;
+ *)
+ ;;
+ esac
+else
+ echo $"Some errors occurred while unpacking. Packages that were installed"
+ echo $"will be configured. This may result in duplicate errors"
+ echo $"or errors caused by missing dependencies. This is OK, only the errors"
+ echo $"above this message are important. Please fix them and run [I]nstall again"
+ echo $"Press [Enter] to continue."
+ read RES && $DPKG "$DPKG_OPTS" --configure -a
+ exit 100
+fi
+
+exit $?
diff --git a/dselect/names b/dselect/names
new file mode 100644
index 0000000..8daa537
--- /dev/null
+++ b/dselect/names
@@ -0,0 +1 @@
+70 apt APT Acquisition [file,http,ftp]
diff --git a/dselect/setup b/dselect/setup
new file mode 100755
index 0000000..58eecfc
--- /dev/null
+++ b/dselect/setup
@@ -0,0 +1,286 @@
+#!/usr/bin/perl -w
+# -*- Mode: Perl -*-
+# setup.pl ---
+# Author : Manoj Srivastava ( srivasta@tiamat.datasync.com )
+# Created On : Wed Mar 4 15:11:47 1998
+# Created On Node : tiamat.datasync.com
+# Last Modified By : Manoj Srivastava
+# Last Modified On : Tue May 19 11:25:32 1998
+# Last Machine Used: tiamat.datasync.com
+# Update Count : 87
+# Status : Unknown, Use with caution!
+# HISTORY :
+# Description :
+# This file is designed to go into /usr/lib/apt/methods/setup
+#
+
+#use strict;
+#use diagnostics;
+#printf STDERR "DEBUG: Arguments $ARGV[0];$ARGV[1];$ARGV[2];\n";
+
+
+# Handle the arguments
+my $vardir=$ARGV[0];
+my $method=$ARGV[1];
+my $option=$ARGV[2];
+my $config_file = '/etc/apt/sources.list';
+
+my $boldon=`setterm -bold on`;
+my $boldoff=`setterm -bold off`;
+
+my @known_types = ('deb');
+my @known_access = ('http', 'ftp', 'file');
+my @typical_distributions = ('stable', 'unstable', 'testing');
+my @typical_components = ('main', 'contrib', 'non-free', 'non-free-firmware');
+
+my %known_access = map {($_,$_)} @known_access;
+my %typical_distributions = map {($_,$_)} @typical_distributions;
+
+# Read the config file, creating source records
+sub read_config {
+ my %params = @_;
+ my @Config = ();
+
+ die "Required parameter Filename Missing" unless
+ $params{'Filename'};
+
+ open (CONFIG, "$params{'Filename'}") ||
+ die "Could not open $params{'Filename'}: $!";
+ while (<CONFIG>) {
+ chomp;
+ my $rec = {};
+ my ($type, $urn, $distribution, $components) =
+ m/^\s*(\S+)\s+(\S+)\s+(\S+)\s*(?:\s+(\S.*))?$/o;
+ $rec->{'Type'} = $type;
+ $rec->{'URN'} = $urn;
+ $rec->{'Distribution'} = $distribution;
+ $rec->{'Components'} = $components;
+ push @Config, $rec;
+ }
+ close(CONFIG);
+
+ return @Config;
+}
+
+# write the config file; writing out the current set of source records
+sub write_config {
+ my %params = @_;
+ my $rec;
+ my %Seen = ();
+
+ die "Required parameter Filename Missing" unless
+ $params{'Filename'};
+ die "Required parameter Config Missing" unless
+ $params{'Config'};
+
+ open (CONFIG, ">$params{'Filename'}") ||
+ die "Could not open $params{'Filename'} for writing: $!";
+ for $rec (@{$params{'Config'}}) {
+ my $line = "$rec->{'Type'} $rec->{'URN'} $rec->{'Distribution'} ";
+ $line .= "$rec->{'Components'}" if $rec->{'Components'};
+ $line .= "\n";
+ print CONFIG $line unless $Seen{$line}++;
+ }
+ close(CONFIG);
+}
+
+# write the config file; writing out the current set of source records
+sub print_config {
+ my %params = @_;
+ my $rec;
+ my %Seen = ();
+
+ die "Required parameter Config Missing" unless
+ $params{'Config'};
+
+ for $rec (@{$params{'Config'}}) {
+ next unless $rec;
+
+ my $line = "$rec->{'Type'} " if $rec->{'Type'};
+ $line .= "$rec->{'URN'} " if $rec->{'URN'};
+ $line .= "$rec->{'Distribution'} " if $rec->{'Distribution'};
+ $line .= "$rec->{'Components'}" if $rec->{'Components'};
+ $line .= "\n";
+ print $line unless $Seen{$line}++;
+ }
+}
+
+# Ask for and add a source record
+sub get_source {
+ my %params = @_;
+ my $rec = {};
+ my $answer;
+ my ($type, $urn, $distribution, $components);
+
+ if ($params{'Default'}) {
+ ($type, $urn, $distribution, $components) =
+ $params{'Default'} =~ m/^\s*(\S+)\s+(\S+)\s+(\S+)\s+(\S.*)$/o;
+ }
+
+ $type = 'deb';
+ $urn = "http://deb.debian.org/debian" unless $urn;
+ $distribution = "stable" unless $distribution;
+ $components = "main contrib non-free non-free-firmware" unless $components;
+
+
+ $rec->{'Type'} = 'deb';
+ $| = 1;
+
+ my $done = 0;
+
+ while (!$done) {
+ print "\n";
+ print "$boldon URL [$urn]: $boldoff";
+
+ $answer=<STDIN>;
+ chomp ($answer);
+ $answer =~ s/\s*//og;
+
+ if ($answer =~ /^\s*$/o) {
+ $rec->{'URN'} = $urn;
+ last;
+ }
+ else {
+ my ($scheme) = $answer =~ /^\s*([^:]+):/o;
+ if (! defined $known_access{$scheme}) {
+ print "Unknown access scheme $scheme in $answer\n";
+ print " The available access methods known to me are\n";
+ print join (' ', @known_access), "\n";
+ print "\n";
+ }
+ else {
+ $rec->{'URN'} = $answer;
+ last;
+ }
+ }
+ }
+
+ print "\n";
+
+ print " Please give the distribution tag to get or a path to the\n";
+ print " package file ending in a /. The distribution\n";
+ print " tags are typically something like:$boldon ";
+ print join(' ', @typical_distributions), "$boldoff\n";
+ print "\n";
+ print "$boldon Distribution [$distribution]:$boldoff ";
+ $answer=<STDIN>;
+ chomp ($answer);
+ $answer =~ s/\s*//og;
+
+ if ($answer =~ /^\s*$/o) {
+ $rec->{'Distribution'} = $distribution;
+ $rec->{'Components'} = &get_components($components);
+ }
+ elsif ($answer =~ m|/$|o) {
+ $rec->{'Distribution'} = "$answer";
+ $rec->{'Components'} = "";
+ }
+ else {
+ # A distribution tag, eh?
+ warn "$answer does not seem to be a typical distribution tag\n"
+ unless defined $typical_distributions{$answer};
+
+ $rec->{'Distribution'} = "$answer";
+ $rec->{'Components'} = &get_components($components);
+ }
+
+ return $rec;
+}
+
+sub get_components {
+ my $default = shift;
+ my $answer;
+
+ print "\n";
+ print " Please give the components to get\n";
+ print " The components are typically something like:$boldon ";
+ print join(' ', @typical_components), "$boldoff\n";
+ print "\n";
+ print "$boldon Components [$default]:$boldoff ";
+ $answer=<STDIN>;
+ chomp ($answer);
+ $answer =~ s/\s+/ /og;
+
+ if ($answer =~ /^\s*$/o) {
+ return $default;
+ }
+ else {
+ return $answer;
+ }
+}
+
+sub get_sources {
+ my @Config = ();
+ my $done = 0;
+
+ my @Oldconfig = ();
+
+ if (-e $config_file) {
+ @Oldconfig = &read_config('Filename' => $config_file)
+ }
+
+ print "\t$boldon Set up a list of distribution source locations $boldoff \n";
+ print "\n";
+
+ print " Please give the base URL of the debian distribution.\n";
+ print " The access schemes I know about are:$boldon ";
+ print join (' ', @known_access), "$boldoff\n";
+# print " The mirror scheme is special that it does not specify the\n";
+# print " location of a debian archive but specifies the location\n";
+# print " of a list of mirrors to use to access the archive.\n";
+ print "\n";
+ print " For example:\n";
+ print " file:/mnt/debian,\n";
+ print " ftp://ftp.debian.org/debian,\n";
+ print " http://ftp.de.debian.org/debian,\n";
+# print " and the special mirror scheme,\n";
+# print " mirror:http://www.debian.org/archivemirrors \n";
+ print "\n";
+
+ my $index = 0;
+ while (!$done) {
+ if ($Oldconfig[$index]) {
+ push (@Config, &get_source('Default' => $Oldconfig[$index++]));
+ }
+ else {
+ push (@Config, &get_source());
+ }
+ print "\n";
+ print "$boldon Would you like to add another source?[y/N]$boldoff ";
+ my $answer = <STDIN>;
+ chomp ($answer);
+ $answer =~ s/\s+/ /og;
+ if ($answer =~ /^\s*$/o) {
+ last;
+ }
+ elsif ($answer !~ m/\s*y/io) {
+ last;
+ }
+ }
+
+ return @Config;
+}
+
+sub main {
+ if (-e $config_file) {
+ my @Oldconfig = &read_config('Filename' => $config_file);
+
+ print "$boldon I see you already have a source list.$boldoff\n";
+ print "-" x 72, "\n";
+ &print_config('Config' => \@Oldconfig);
+ print "-" x 72, "\n";
+ print "$boldon Do you wish to overwrite it? [y/N]$boldoff ";
+ my $answer = <STDIN>;
+ chomp ($answer);
+ $answer =~ s/\s+/ /og;
+ exit 0 unless $answer =~ m/\s*y/io;
+ }
+ # OK. They want to be here.
+ my @Config = &get_sources();
+ #&print_config('Config' => \@Config);
+ &write_config('Config' => \@Config, 'Filename' => $config_file);
+}
+
+&main();
+
+
diff --git a/dselect/update b/dselect/update
new file mode 100755
index 0000000..0ab317e
--- /dev/null
+++ b/dselect/update
@@ -0,0 +1,48 @@
+#!/bin/bash
+set -e
+
+# Set the textdomain for the translations using $"..."
+TEXTDOMAIN="apt"
+
+# Get the configuration from /etc/apt/apt.conf
+CLEAN="prompt"
+OPTS=""
+APTGET="/usr/bin/apt-get"
+APTCACHE="/usr/bin/apt-cache"
+DPKG="/usr/bin/dpkg"
+DPKG_OPTS="--admindir=$1"
+APT_OPT0="-oDir::State::status=$1/status"
+APT_OPT1="-oDPkg::Options::=$DPKG_OPTS"
+CACHEDIR="/var/cache/apt"
+PROMPT="false"
+RES=`apt-config shell CLEAN DSelect::Clean OPTS DSelect::UpdateOptions \
+ DPKG Dir::Bin::dpkg/f APTGET Dir::Bin::apt-get/f \
+ APTCACHE Dir::Bin::apt-cache/f CACHEDIR Dir::Cache/d \
+ PROMPT DSelect::PromptAfterUpdate/b`
+eval $RES
+
+# It looks slightly ugly to have a double / in the dpkg output
+CACHEDIR=`echo $CACHEDIR | sed -e "s|/$||"`
+
+STATUS=1
+if $APTGET $OPTS "$APT_OPT0" "$APT_OPT1" update
+then
+ echo $"Merging available information"
+ rm -f $CACHEDIR/available
+ $APTCACHE dumpavail > $CACHEDIR/available
+ $DPKG "$DPKG_OPTS" --update-avail $CACHEDIR/available
+ rm -f $CACHEDIR/available
+
+ case "$CLEAN" in
+ Pre-Auto|PreAuto|pre-auto)
+ $APTGET "$APT_OPT0" "$APT_OPT1" autoclean;;
+ esac
+
+ STATUS=0
+fi
+
+if [ x$PROMPT = "xtrue" ]; then
+ echo $"Press [Enter] to continue." && read RES;
+fi
+
+exit $STATUS
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 12:32:41 +0000