Adding upstream version 2.10.0+dfsg.upstream/2.10.0+dfsgupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

5 files changed, 465 insertions, 0 deletions

diff --git a/bl2u/aarch32/bl2u_entrypoint.S b/bl2u/aarch32/bl2u_entrypoint.S
new file mode 100644
index 0000000..1063789
--- /dev/null
+++ b/bl2u/aarch32/bl2u_entrypoint.S
@@ -0,0 +1,127 @@
+/*
+ * Copyright (c) 2016-2022, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <asm_macros.S>
+#include <common/bl_common.h>
+
+	.globl	bl2u_vector_table
+	.globl	bl2u_entrypoint
+
+
+vector_base bl2u_vector_table
+	b	bl2u_entrypoint
+	b	report_exception	/* Undef */
+	b	report_exception	/* SVC call */
+	b	report_prefetch_abort	/* Prefetch abort */
+	b	report_data_abort	/* Data abort */
+	b	report_exception	/* Reserved */
+	b	report_exception	/* IRQ */
+	b	report_exception	/* FIQ */
+
+
+func bl2u_entrypoint
+	/*---------------------------------------------
+	 * Save from r1 the extents of the trusted ram
+	 * available to BL2U for future use.
+	 * r0 is not currently used.
+	 * ---------------------------------------------
+	 */
+	mov	r11, r1
+	mov	r10, r2
+
+	/* ---------------------------------------------
+	 * Set the exception vector to something sane.
+	 * ---------------------------------------------
+	 */
+	ldr	r0, =bl2u_vector_table
+	stcopr	r0, VBAR
+	isb
+
+	/* --------------------------------------------------------
+	 * Enable the instruction cache - disable speculative loads
+	 * --------------------------------------------------------
+	 */
+	ldcopr	r0, SCTLR
+	orr	r0, r0, #SCTLR_I_BIT
+	bic	r0, r0, #SCTLR_DSSBS_BIT
+	stcopr	r0, SCTLR
+	isb
+
+	/* ---------------------------------------------
+	 * Since BL2U executes after BL1, it is assumed
+	 * here that BL1 has already has done the
+	 * necessary register initializations.
+	 * ---------------------------------------------
+	 */
+
+	/* ---------------------------------------------
+	 * Invalidate the RW memory used by the BL2U
+	 * image. This includes the data and NOBITS
+	 * sections. This is done to safeguard against
+	 * possible corruption of this memory by dirty
+	 * cache lines in a system cache as a result of
+	 * use by an earlier boot loader stage.
+	 * ---------------------------------------------
+	 */
+	ldr	r0, =__RW_START__
+	ldr	r1, =__RW_END__
+	sub	r1, r1, r0
+	bl	inv_dcache_range
+
+	/* ---------------------------------------------
+	 * Zero out NOBITS sections. There are 2 of them:
+	 *   - the .bss section;
+	 *   - the coherent memory section.
+	 * ---------------------------------------------
+	 */
+	ldr	r0, =__BSS_START__
+	ldr	r1, =__BSS_END__
+	sub 	r1, r1, r0
+	bl	zeromem
+
+	/* --------------------------------------------
+	 * Allocate a stack whose memory will be marked
+	 * as Normal-IS-WBWA when the MMU is enabled.
+	 * There is no risk of reading stale stack
+	 * memory after enabling the MMU as only the
+	 * primary cpu is running at the moment.
+	 * --------------------------------------------
+	 */
+	bl	plat_set_my_stack
+
+	/* ---------------------------------------------
+	 * Initialize the stack protector canary before
+	 * any C code is called.
+	 * ---------------------------------------------
+	 */
+#if STACK_PROTECTOR_ENABLED
+	bl	update_stack_protector_canary
+#endif
+
+	/* ---------------------------------------------
+	 * Perform early platform setup & platform
+	 * specific early arch. setup e.g. mmu setup
+	 * ---------------------------------------------
+	 */
+	mov	r0, r11
+	mov	r1, r10
+	bl	bl2u_early_platform_setup
+	bl	bl2u_plat_arch_setup
+
+	/* ---------------------------------------------
+	 * Jump to main function.
+	 * ---------------------------------------------
+	 */
+	bl	bl2u_main
+
+	/* ---------------------------------------------
+	 * Should never reach this point.
+	 * ---------------------------------------------
+	 */
+	no_ret	plat_panic_handler
+
+endfunc bl2u_entrypoint
diff --git a/bl2u/aarch64/bl2u_entrypoint.S b/bl2u/aarch64/bl2u_entrypoint.S
new file mode 100644
index 0000000..15978b6
--- /dev/null
+++ b/bl2u/aarch64/bl2u_entrypoint.S
@@ -0,0 +1,129 @@
+/*
+ * Copyright (c) 2015-2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <asm_macros.S>
+#include <common/bl_common.h>
+
+	.globl	bl2u_entrypoint
+
+
+func bl2u_entrypoint
+	/*---------------------------------------------
+	 * Store the extents of the tzram available to
+	 * BL2U and other platform specific information
+	 * for future use. x0 is currently not used.
+	 * ---------------------------------------------
+	 */
+	mov	x20, x1
+	mov	x21, x2
+
+	/* ---------------------------------------------
+	 * Set the exception vector to something sane.
+	 * ---------------------------------------------
+	 */
+	adr	x0, early_exceptions
+	msr	vbar_el1, x0
+	isb
+
+	/* ---------------------------------------------
+	 * Enable the SError interrupt now that the
+	 * exception vectors have been setup.
+	 * ---------------------------------------------
+	 */
+	msr	daifclr, #DAIF_ABT_BIT
+
+	/* ---------------------------------------------
+	 * Enable the instruction cache, stack pointer
+	 * and data access alignment checks and disable
+	 * speculative loads.
+	 * ---------------------------------------------
+	 */
+	mov	x1, #(SCTLR_I_BIT | SCTLR_A_BIT | SCTLR_SA_BIT)
+	mrs	x0, sctlr_el1
+	orr	x0, x0, x1
+	bic	x0, x0, #SCTLR_DSSBS_BIT
+	msr	sctlr_el1, x0
+	isb
+
+	/* ---------------------------------------------
+	 * Invalidate the RW memory used by the BL2U
+	 * image. This includes the data and NOBITS
+	 * sections. This is done to safeguard against
+	 * possible corruption of this memory by dirty
+	 * cache lines in a system cache as a result of
+	 * use by an earlier boot loader stage.
+	 * ---------------------------------------------
+	 */
+	adr	x0, __RW_START__
+	adr	x1, __RW_END__
+	sub	x1, x1, x0
+	bl	inv_dcache_range
+
+	/* ---------------------------------------------
+	 * Zero out NOBITS sections. There are 2 of them:
+	 *   - the .bss section;
+	 *   - the coherent memory section.
+	 * ---------------------------------------------
+	 */
+	adrp	x0, __BSS_START__
+	add	x0, x0, :lo12:__BSS_START__
+	adrp	x1, __BSS_END__
+	add	x1, x1, :lo12:__BSS_END__
+	sub	x1, x1, x0
+	bl	zeromem
+
+	/* --------------------------------------------
+	 * Allocate a stack whose memory will be marked
+	 * as Normal-IS-WBWA when the MMU is enabled.
+	 * There is no risk of reading stale stack
+	 * memory after enabling the MMU as only the
+	 * primary cpu is running at the moment.
+	 * --------------------------------------------
+	 */
+	bl	plat_set_my_stack
+
+	/* ---------------------------------------------
+	 * Initialize the stack protector canary before
+	 * any C code is called.
+	 * ---------------------------------------------
+	 */
+#if STACK_PROTECTOR_ENABLED
+	bl	update_stack_protector_canary
+#endif
+
+	/* ---------------------------------------------
+	 * Perform early platform setup & platform
+	 * specific early arch. setup e.g. mmu setup
+	 * ---------------------------------------------
+	 */
+	mov	x0, x20
+	mov	x1, x21
+	bl	bl2u_early_platform_setup
+	bl	bl2u_plat_arch_setup
+
+#if ENABLE_PAUTH
+	/* ---------------------------------------------
+	 * Program APIAKey_EL1
+	 * and enable pointer authentication.
+	 * ---------------------------------------------
+	 */
+	bl	pauth_init_enable_el1
+#endif
+
+	/* ---------------------------------------------
+	 * Jump to bl2u_main function.
+	 * ---------------------------------------------
+	 */
+	bl	bl2u_main
+
+	/* ---------------------------------------------
+	 * Should never reach this point.
+	 * ---------------------------------------------
+	 */
+	no_ret	plat_panic_handler
+
+endfunc bl2u_entrypoint
diff --git a/bl2u/bl2u.ld.S b/bl2u/bl2u.ld.S
new file mode 100644
index 0000000..7b1a101
--- /dev/null
+++ b/bl2u/bl2u.ld.S
@@ -0,0 +1,123 @@
+/*
+ * Copyright (c) 2015-2023, Arm Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <platform_def.h>
+
+#include <common/bl_common.ld.h>
+#include <lib/xlat_tables/xlat_tables_defs.h>
+
+OUTPUT_FORMAT(PLATFORM_LINKER_FORMAT)
+OUTPUT_ARCH(PLATFORM_LINKER_ARCH)
+ENTRY(bl2u_entrypoint)
+
+MEMORY {
+    RAM (rwx): ORIGIN = BL2U_BASE, LENGTH = BL2U_LIMIT - BL2U_BASE
+}
+
+SECTIONS {
+    RAM_REGION_START = ORIGIN(RAM);
+    RAM_REGION_LENGTH = LENGTH(RAM);
+    . = BL2U_BASE;
+
+    ASSERT(. == ALIGN(PAGE_SIZE),
+        "BL2U_BASE address is not aligned on a page boundary.")
+
+#if SEPARATE_CODE_AND_RODATA
+    .text . : {
+        __TEXT_START__ = .;
+
+        *bl2u_entrypoint.o(.text*)
+        *(SORT_BY_ALIGNMENT(.text*))
+        *(.vectors)
+        __TEXT_END_UNALIGNED__ = .;
+
+        . = ALIGN(PAGE_SIZE);
+
+        __TEXT_END__ = .;
+    } >RAM
+
+    /* .ARM.extab and .ARM.exidx are only added because Clang needs them */
+    .ARM.extab . : {
+        *(.ARM.extab* .gnu.linkonce.armextab.*)
+    } >RAM
+
+    .ARM.exidx . : {
+        *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+    } >RAM
+
+    .rodata . : {
+        __RODATA_START__ = .;
+        *(SORT_BY_ALIGNMENT(.rodata*))
+
+        RODATA_COMMON
+
+        __RODATA_END_UNALIGNED__ = .;
+        . = ALIGN(PAGE_SIZE);
+        __RODATA_END__ = .;
+    } >RAM
+#else /* SEPARATE_CODE_AND_RODATA */
+    .ro . : {
+        __RO_START__ = .;
+
+        *bl2u_entrypoint.o(.text*)
+        *(SORT_BY_ALIGNMENT(.text*))
+        *(SORT_BY_ALIGNMENT(.rodata*))
+
+        RODATA_COMMON
+
+        *(.vectors)
+
+        __RO_END_UNALIGNED__ = .;
+
+        /*
+         * Memory page(s) mapped to this section will be marked as read-only,
+         * executable. No RW data from the next section must creep in. Ensure
+         * that the rest of the current memory page is unused.
+         */
+        . = ALIGN(PAGE_SIZE);
+
+        __RO_END__ = .;
+    } >RAM
+#endif /* SEPARATE_CODE_AND_RODATA */
+
+    __RW_START__ = .;
+
+    DATA_SECTION >RAM
+    STACK_SECTION >RAM
+    BSS_SECTION >RAM
+    XLAT_TABLE_SECTION >RAM
+
+#if USE_COHERENT_MEM
+    /*
+     * The base address of the coherent memory section must be page-aligned to
+     * guarantee that the coherent data are stored on their own pages and are
+     * not mixed with normal data.  This is required to set up the correct
+     * memory attributes for the coherent data page tables.
+     */
+    .coherent_ram (NOLOAD) : ALIGN(PAGE_SIZE) {
+        __COHERENT_RAM_START__ = .;
+        *(.tzfw_coherent_mem)
+        __COHERENT_RAM_END_UNALIGNED__ = .;
+
+        /*
+         * Memory page(s) mapped to this section will be marked as device
+         * memory. No other unexpected data must creep in. Ensure the rest of
+         * the current memory page is unused.
+         */
+        . = ALIGN(PAGE_SIZE);
+
+        __COHERENT_RAM_END__ = .;
+    } >RAM
+#endif /* USE_COHERENT_MEM */
+
+    __RW_END__ = .;
+    __BL2U_END__ = .;
+
+    __BSS_SIZE__ = SIZEOF(.bss);
+
+    ASSERT(. <= BL2U_LIMIT, "BL2U image has exceeded its limit.")
+    RAM_REGION_END = .;
+}
diff --git a/bl2u/bl2u.mk b/bl2u/bl2u.mk
new file mode 100644
index 0000000..9fe20f5
--- /dev/null
+++ b/bl2u/bl2u.mk
@@ -0,0 +1,21 @@
+#
+# Copyright (c) 2015-2023, Arm Limited and Contributors. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+BL2U_SOURCES		+=	bl2u/bl2u_main.c			\
+				bl2u/${ARCH}/bl2u_entrypoint.S		\
+				plat/common/${ARCH}/platform_up_stack.S
+
+ifeq (${ARCH},aarch64)
+BL2U_SOURCES		+=	common/aarch64/early_exceptions.S
+endif
+
+BL2U_DEFAULT_LINKER_SCRIPT_SOURCE := bl2u/bl2u.ld.S
+
+ifneq ($(findstring gcc,$(notdir $(LD))),)
+        BL2U_LDFLAGS	+=	-Wl,--sort-section=alignment
+else ifneq ($(findstring ld,$(notdir $(LD))),)
+        BL2U_LDFLAGS	+=	--sort-section=alignment
+endif
diff --git a/bl2u/bl2u_main.c b/bl2u/bl2u_main.c
new file mode 100644
index 0000000..fcb73b9
--- /dev/null
+++ b/bl2u/bl2u_main.c
@@ -0,0 +1,65 @@
+/*
+ * Copyright (c) 2015-2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <stdint.h>
+
+#include <platform_def.h>
+
+#include <arch.h>
+#include <arch_helpers.h>
+#include <bl1/bl1.h>
+#include <bl2u/bl2u.h>
+#include <common/bl_common.h>
+#include <common/debug.h>
+#include <drivers/auth/auth_mod.h>
+#include <drivers/console.h>
+#include <plat/common/platform.h>
+
+/*******************************************************************************
+ * This function is responsible to:
+ * Load SCP_BL2U if platform has defined SCP_BL2U_BASE
+ * Perform platform setup.
+ * Go back to EL3.
+ ******************************************************************************/
+void bl2u_main(void)
+{
+	NOTICE("BL2U: %s\n", version_string);
+	NOTICE("BL2U: %s\n", build_message);
+
+#if SCP_BL2U_BASE
+	int rc;
+	/* Load the subsequent bootloader images */
+	rc = bl2u_plat_handle_scp_bl2u();
+	if (rc != 0) {
+		ERROR("Failed to load SCP_BL2U (%i)\n", rc);
+		panic();
+	}
+#endif
+
+	/* Perform platform setup in BL2U after loading SCP_BL2U */
+	bl2u_platform_setup();
+
+	console_flush();
+
+#ifndef __aarch64__
+	/*
+	 * For AArch32 state BL1 and BL2U share the MMU setup.
+	 * Given that BL2U does not map BL1 regions, MMU needs
+	 * to be disabled in order to go back to BL1.
+	 */
+	disable_mmu_icache_secure();
+#endif /* !__aarch64__ */
+
+	/*
+	 * Indicate that BL2U is done and resume back to
+	 * normal world via an SMC to BL1.
+	 * x1 could be passed to Normal world,
+	 * so DO NOT pass any secret information.
+	 */
+	smc(FWU_SMC_SEC_IMAGE_DONE, 0, 0, 0, 0, 0, 0, 0);
+	wfi();
+}