Adding upstream version 2.10.0+dfsg.upstream/2.10.0+dfsgupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 84 insertions, 0 deletions

diff --git a/docs/plat/arm/fvp-ve/index.rst b/docs/plat/arm/fvp-ve/index.rst
new file mode 100644
index 0000000..8ac0741
--- /dev/null
+++ b/docs/plat/arm/fvp-ve/index.rst
@@ -0,0 +1,84 @@
+Arm Versatile Express
+=====================
+
+Versatile Express (VE) family development platform provides an ultra fast
+environment for prototyping Armv7 System-on-Chip designs. VE Fixed Virtual
+Platforms (FVP) are simulations of Versatile Express boards. The platform in
+Trusted Firmware-A has been verified with Arm Cortex-A5 and Cortex-A7 VE FVP's.
+This platform is tested on and only expected to work with single core models.
+
+Boot Sequence
+-------------
+
+BL1 --> BL2 --> BL32(sp_min) --> BL33(u-boot) --> Linux kernel
+
+How to build
+------------
+
+Code Locations
+~~~~~~~~~~~~~~
+-  `U-boot <https://git.linaro.org/landing-teams/working/arm/u-boot.git>`__
+
+-  `Trusted Firmware-A <https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git>`__
+
+Build Procedure
+~~~~~~~~~~~~~~~
+
+-  Obtain arm toolchain. The software stack has been verified with linaro 6.2
+   `arm-linux-gnueabihf <https://releases.linaro.org/components/toolchain/binaries/6.2-2016.11/arm-linux-gnueabihf/>`__.
+   Set the CROSS_COMPILE environment variable to point to the toolchain folder.
+
+-  Fetch and build u-boot.
+   Make the .config file using the command:
+
+   .. code:: shell
+
+      make ARCH=arm vexpress_aemv8a_aarch32_config
+
+   Make the u-boot binary for Cortex-A5 using the command:
+
+   .. code:: shell
+
+     make ARCH=arm SUPPORT_ARCH_TIMER=no
+
+   Make the u-boot binary for Cortex-A7 using the command:
+
+   .. code:: shell
+
+     make ARCH=arm
+
+
+-  Build TF-A:
+
+   The make command for Cortex-A5 is:
+
+   .. code:: shell
+
+       make PLAT=fvp_ve ARCH=aarch32 ARM_ARCH_MAJOR=7 ARM_CORTEX_A5=yes \
+       AARCH32_SP=sp_min FVP_HW_CONFIG_DTS=fdts/fvp-ve-Cortex-A5x1.dts \
+       ARM_XLAT_TABLES_LIB_V1=1 BL33=<path_to_u-boot.bin> all fip
+
+   The make command for Cortex-A7 is:
+
+   .. code:: shell
+
+      make PLAT=fvp_ve ARCH=aarch32 ARM_ARCH_MAJOR=7 ARM_CORTEX_A7=yes \
+      AARCH32_SP=sp_min FVP_HW_CONFIG_DTS=fdts/fvp-ve-Cortex-A7x1.dts  \
+      BL33=<path_to_u-boot.bin> all fip
+
+Run Procedure
+~~~~~~~~~~~~~
+
+The following model parameters should be used to boot Linux using the build of
+Trusted Firmware-A made using the above make commands:
+
+  .. code:: shell
+
+    ./<path_to_model> <path_to_bl1.elf> \
+          -C motherboard.flashloader1.fname=<path_to_fip.bin> \
+          --data cluster.cpu0=<path_to_zImage>@0x80080000  \
+          --data cluster.cpu0=<path_to_ramdisk>@0x84000000
+
+--------------
+
+*Copyright (c) 2019, Arm Limited. All rights reserved.*