Adding upstream version 2.10.0+dfsg.upstream/2.10.0+dfsgupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 107 insertions, 0 deletions

diff --git a/drivers/brcm/spi/iproc_qspi.h b/drivers/brcm/spi/iproc_qspi.h
new file mode 100644
index 0000000..7a8bd91
--- /dev/null
+++ b/drivers/brcm/spi/iproc_qspi.h
@@ -0,0 +1,107 @@
+/*
+ * Copyright (c) 2017 - 2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef IPROC_QSPI_H
+#define IPROC_QSPI_H
+
+#include <platform_def.h>
+
+/*SPI configuration enable*/
+#define IPROC_QSPI_CLK_SPEED	62500000
+#define SPI_CPHA		(1 << 0)
+#define SPI_CPOL		(1 << 1)
+#define IPROC_QSPI_MODE0	0
+#define IPROC_QSPI_MODE3	(SPI_CPOL|SPI_CPHA)
+
+#define IPROC_QSPI_BUS                   0
+#define IPROC_QSPI_CS                    0
+#define IPROC_QSPI_BASE_REG              QSPI_CTRL_BASE_ADDR
+#define IPROC_QSPI_CRU_CONTROL_REG       QSPI_CLK_CTRL
+
+#define QSPI_AXI_CLK                        200000000
+
+#define QSPI_RETRY_COUNT_US_MAX             200000
+
+/* Chip attributes */
+#define QSPI_REG_BASE			IPROC_QSPI_BASE_REG
+#define CRU_CONTROL_REG			IPROC_QSPI_CRU_CONTROL_REG
+#define SPBR_DIV_MIN			8U
+#define SPBR_DIV_MAX			255U
+#define NUM_CDRAM_BYTES			16U
+
+/* Register fields */
+#define MSPI_SPCR0_MSB_BITS_8		0x00000020
+
+/* Flash opcode and parameters */
+#define CDRAM_PCS0			2
+#define CDRAM_CONT			(1 << 7)
+#define CDRAM_BITS_EN			(1 << 6)
+#define CDRAM_QUAD_MODE			(1 << 8)
+#define CDRAM_RBIT_INPUT		(1 << 10)
+
+/* MSPI registers */
+#define QSPI_MSPI_MODE_REG_BASE		(QSPI_REG_BASE + 0x200)
+#define MSPI_SPCR0_LSB_REG		0x000
+#define MSPI_SPCR0_MSB_REG		0x004
+#define MSPI_SPCR1_LSB_REG		0x008
+#define MSPI_SPCR1_MSB_REG		0x00c
+#define MSPI_NEWQP_REG			0x010
+#define MSPI_ENDQP_REG			0x014
+#define MSPI_SPCR2_REG			0x018
+#define MSPI_STATUS_REG			0x020
+#define MSPI_CPTQP_REG			0x024
+#define MSPI_TXRAM_REG			0x040
+#define MSPI_RXRAM_REG			0x0c0
+#define MSPI_CDRAM_REG			0x140
+#define MSPI_WRITE_LOCK_REG		0x180
+#define MSPI_DISABLE_FLUSH_GEN_REG	0x184
+
+#define MSPI_SPCR0_MSB_REG_MSTR_SHIFT		7
+#define MSPI_SPCR0_MSB_REG_16_BITS_PER_WD_SHIFT	(0 << 2)
+#define MSPI_SPCR0_MSB_REG_MODE_MASK		0x3
+
+/* BSPI registers */
+#define QSPI_BSPI_MODE_REG_BASE		QSPI_REG_BASE
+#define BSPI_MAST_N_BOOT_CTRL_REG	0x008
+#define BSPI_BUSY_STATUS_REG		0x00c
+
+#define MSPI_CMD_COMPLETE_MASK		1
+#define BSPI_BUSY_MASK			1
+#define MSPI_CTRL_MASK			1
+
+#define MSPI_SPE			(1 << 6)
+#define MSPI_CONT_AFTER_CMD		(1 << 7)
+
+/* State */
+enum bcm_qspi_state {
+	QSPI_STATE_DISABLED,
+	QSPI_STATE_MSPI,
+	QSPI_STATE_BSPI
+};
+
+/* QSPI private data */
+struct bcmspi_priv {
+	/* Specified SPI parameters */
+	uint32_t max_hz;
+	uint32_t spi_mode;
+
+	/* State */
+	enum bcm_qspi_state state;
+	int mspi_16bit;
+
+	/* Registers */
+	uintptr_t mspi_hw;
+	uintptr_t bspi_hw;
+};
+
+int iproc_qspi_setup(uint32_t bus, uint32_t cs,
+		     uint32_t max_hz, uint32_t mode);
+int iproc_qspi_claim_bus(void);
+void iproc_qspi_release_bus(void);
+int iproc_qspi_xfer(uint32_t bitlen, const void *dout,
+		    void *din, unsigned long flags);
+
+#endif	/* _IPROC_QSPI_H_ */