Adding upstream version 2.10.0+dfsg.upstream/2.10.0+dfsgupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

8 files changed, 5556 insertions, 0 deletions

diff --git a/drivers/marvell/comphy.h b/drivers/marvell/comphy.h
new file mode 100644
index 0000000..fab564e
--- /dev/null
+++ b/drivers/marvell/comphy.h
@@ -0,0 +1,472 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+/* Driver for COMPHY unit that is part or Marvell A8K SoCs */
+
+#ifndef COMPHY_H
+#define COMPHY_H
+
+/* COMPHY registers */
+#define COMMON_PHY_CFG1_REG			0x0
+#define COMMON_PHY_CFG1_PWR_UP_OFFSET		1
+#define COMMON_PHY_CFG1_PWR_UP_MASK		\
+				(0x1 << COMMON_PHY_CFG1_PWR_UP_OFFSET)
+#define COMMON_PHY_CFG1_PIPE_SELECT_OFFSET	2
+#define COMMON_PHY_CFG1_PIPE_SELECT_MASK	\
+				(0x1 << COMMON_PHY_CFG1_PIPE_SELECT_OFFSET)
+#define COMMON_PHY_CFG1_PWR_ON_RESET_OFFSET	13
+#define COMMON_PHY_CFG1_PWR_ON_RESET_MASK	\
+				(0x1 << COMMON_PHY_CFG1_PWR_ON_RESET_OFFSET)
+#define COMMON_PHY_CFG1_CORE_RSTN_OFFSET	14
+#define COMMON_PHY_CFG1_CORE_RSTN_MASK		\
+				(0x1 << COMMON_PHY_CFG1_CORE_RSTN_OFFSET)
+#define COMMON_PHY_PHY_MODE_OFFSET		15
+#define COMMON_PHY_PHY_MODE_MASK		\
+				(0x1 << COMMON_PHY_PHY_MODE_OFFSET)
+
+#define COMMON_SELECTOR_PHY_OFFSET			0x140
+#define COMMON_SELECTOR_PIPE_OFFSET			0x144
+
+#define COMMON_PHY_SD_CTRL1				0x148
+#define COMMON_PHY_SD_CTRL1_COMPHY_0_4_PORT_OFFSET	0
+#define COMMON_PHY_SD_CTRL1_COMPHY_0_4_PORT_MASK	0xFFFF
+#define COMMON_PHY_SD_CTRL1_PCIE_X4_EN_OFFSET		24
+#define COMMON_PHY_SD_CTRL1_PCIE_X4_EN_MASK		\
+				(0x1 << COMMON_PHY_SD_CTRL1_PCIE_X4_EN_OFFSET)
+#define COMMON_PHY_SD_CTRL1_PCIE_X2_EN_OFFSET		25
+#define COMMON_PHY_SD_CTRL1_PCIE_X2_EN_MASK		\
+				(0x1 << COMMON_PHY_SD_CTRL1_PCIE_X2_EN_OFFSET)
+
+#define DFX_DEV_GEN_CTRL12			0x80
+#define DFX_DEV_GEN_PCIE_CLK_SRC_OFFSET		7
+#define DFX_DEV_GEN_PCIE_CLK_SRC_MASK		\
+				(0x3 << DFX_DEV_GEN_PCIE_CLK_SRC_OFFSET)
+
+/* HPIPE register */
+#define HPIPE_PWR_PLL_REG			0x4
+#define HPIPE_PWR_PLL_REF_FREQ_OFFSET		0
+#define HPIPE_PWR_PLL_REF_FREQ_MASK		\
+				(0x1f << HPIPE_PWR_PLL_REF_FREQ_OFFSET)
+#define HPIPE_PWR_PLL_PHY_MODE_OFFSET		5
+#define HPIPE_PWR_PLL_PHY_MODE_MASK		\
+				(0x7 << HPIPE_PWR_PLL_PHY_MODE_OFFSET)
+
+#define HPIPE_DFE_REG0				0x01C
+#define HPIPE_DFE_RES_FORCE_OFFSET		15
+#define HPIPE_DFE_RES_FORCE_MASK		\
+				(0x1 << HPIPE_DFE_RES_FORCE_OFFSET)
+
+#define HPIPE_G2_SET_1_REG			0x040
+#define HPIPE_G2_SET_1_G2_RX_SELMUPI_OFFSET	0
+#define HPIPE_G2_SET_1_G2_RX_SELMUPI_MASK	\
+				(0x7 << HPIPE_G2_SET_1_G2_RX_SELMUPI_OFFSET)
+#define HPIPE_G2_SET_1_G2_RX_SELMUPP_OFFSET	3
+#define HPIPE_G2_SET_1_G2_RX_SELMUPP_MASK	\
+				(0x7 << HPIPE_G2_SET_1_G2_RX_SELMUPP_OFFSET)
+#define HPIPE_G2_SET_1_G2_RX_SELMUFI_OFFSET	6
+#define HPIPE_G2_SET_1_G2_RX_SELMUFI_MASK	\
+				(0x3 << HPIPE_G2_SET_1_G2_RX_SELMUFI_OFFSET)
+
+#define HPIPE_G3_SETTINGS_1_REG			0x048
+#define HPIPE_G3_RX_SELMUPI_OFFSET		0
+#define HPIPE_G3_RX_SELMUPI_MASK		\
+				(0x7 << HPIPE_G3_RX_SELMUPI_OFFSET)
+#define HPIPE_G3_RX_SELMUPF_OFFSET		3
+#define HPIPE_G3_RX_SELMUPF_MASK		\
+				(0x7 << HPIPE_G3_RX_SELMUPF_OFFSET)
+#define HPIPE_G3_SETTING_BIT_OFFSET		13
+#define HPIPE_G3_SETTING_BIT_MASK		\
+				(0x1 << HPIPE_G3_SETTING_BIT_OFFSET)
+
+#define HPIPE_INTERFACE_REG			0x94
+#define HPIPE_INTERFACE_GEN_MAX_OFFSET		10
+#define HPIPE_INTERFACE_GEN_MAX_MASK		\
+				(0x3 << HPIPE_INTERFACE_GEN_MAX_OFFSET)
+#define HPIPE_INTERFACE_DET_BYPASS_OFFSET	12
+#define HPIPE_INTERFACE_DET_BYPASS_MASK		\
+				(0x1 << HPIPE_INTERFACE_DET_BYPASS_OFFSET)
+#define HPIPE_INTERFACE_LINK_TRAIN_OFFSET	14
+#define HPIPE_INTERFACE_LINK_TRAIN_MASK		\
+				(0x1 << HPIPE_INTERFACE_LINK_TRAIN_OFFSET)
+
+#define HPIPE_VDD_CAL_CTRL_REG			0x114
+#define HPIPE_EXT_SELLV_RXSAMPL_OFFSET		5
+#define HPIPE_EXT_SELLV_RXSAMPL_MASK		\
+				(0x1f << HPIPE_EXT_SELLV_RXSAMPL_OFFSET)
+
+#define HPIPE_PCIE_REG0				0x120
+#define HPIPE_PCIE_IDLE_SYNC_OFFSET		12
+#define HPIPE_PCIE_IDLE_SYNC_MASK		\
+				(0x1 << HPIPE_PCIE_IDLE_SYNC_OFFSET)
+#define HPIPE_PCIE_SEL_BITS_OFFSET		13
+#define HPIPE_PCIE_SEL_BITS_MASK		\
+				(0x3 << HPIPE_PCIE_SEL_BITS_OFFSET)
+
+#define HPIPE_LANE_ALIGN_REG			0x124
+#define HPIPE_LANE_ALIGN_OFF_OFFSET		12
+#define HPIPE_LANE_ALIGN_OFF_MASK		\
+				(0x1 << HPIPE_LANE_ALIGN_OFF_OFFSET)
+
+#define HPIPE_MISC_REG				0x13C
+#define HPIPE_MISC_CLK100M_125M_OFFSET		4
+#define HPIPE_MISC_CLK100M_125M_MASK		\
+				(0x1 << HPIPE_MISC_CLK100M_125M_OFFSET)
+#define HPIPE_MISC_ICP_FORCE_OFFSET		5
+#define HPIPE_MISC_ICP_FORCE_MASK		\
+				(0x1 << HPIPE_MISC_ICP_FORCE_OFFSET)
+#define HPIPE_MISC_TXDCLK_2X_OFFSET		6
+#define HPIPE_MISC_TXDCLK_2X_MASK		\
+				(0x1 << HPIPE_MISC_TXDCLK_2X_OFFSET)
+#define HPIPE_MISC_CLK500_EN_OFFSET		7
+#define HPIPE_MISC_CLK500_EN_MASK		\
+				(0x1 << HPIPE_MISC_CLK500_EN_OFFSET)
+#define HPIPE_MISC_REFCLK_SEL_OFFSET		10
+#define HPIPE_MISC_REFCLK_SEL_MASK		\
+				(0x1 << HPIPE_MISC_REFCLK_SEL_OFFSET)
+
+#define HPIPE_SAMPLER_N_PROC_CALIB_CTRL_REG	0x16C
+#define HPIPE_SMAPLER_OFFSET			12
+#define HPIPE_SMAPLER_MASK			(0x1 << HPIPE_SMAPLER_OFFSET)
+
+#define HPIPE_PWR_CTR_DTL_REG			0x184
+#define HPIPE_PWR_CTR_DTL_FLOOP_EN_OFFSET	2
+#define HPIPE_PWR_CTR_DTL_FLOOP_EN_MASK		\
+				(0x1 << HPIPE_PWR_CTR_DTL_FLOOP_EN_OFFSET)
+
+#define HPIPE_FRAME_DET_CONTROL_REG		0x220
+#define HPIPE_FRAME_DET_LOCK_LOST_TO_OFFSET	12
+#define HPIPE_FRAME_DET_LOCK_LOST_TO_MASK	\
+				(0x1 << HPIPE_FRAME_DET_LOCK_LOST_TO_OFFSET)
+
+#define HPIPE_TX_TRAIN_CTRL_0_REG		0x268
+#define HPIPE_TX_TRAIN_P2P_HOLD_OFFSET		15
+#define HPIPE_TX_TRAIN_P2P_HOLD_MASK		\
+				(0x1 << HPIPE_TX_TRAIN_P2P_HOLD_OFFSET)
+
+#define HPIPE_TX_TRAIN_CTRL_REG			0x26C
+#define HPIPE_TX_TRAIN_CTRL_G1_OFFSET		0
+#define HPIPE_TX_TRAIN_CTRL_G1_MASK		\
+				(0x1 << HPIPE_TX_TRAIN_CTRL_G1_OFFSET)
+#define HPIPE_TX_TRAIN_CTRL_GN1_OFFSET		1
+#define HPIPE_TX_TRAIN_CTRL_GN1_MASK		\
+				(0x1 << HPIPE_TX_TRAIN_CTRL_GN1_OFFSET)
+#define HPIPE_TX_TRAIN_CTRL_G0_OFFSET		2
+#define HPIPE_TX_TRAIN_CTRL_G0_MASK		\
+				(0x1 << HPIPE_TX_TRAIN_CTRL_G0_OFFSET)
+
+#define HPIPE_TX_TRAIN_CTRL_4_REG		0x278
+#define HPIPE_TRX_TRAIN_TIMER_OFFSET		0
+#define HPIPE_TRX_TRAIN_TIMER_MASK		\
+				(0x3FF << HPIPE_TRX_TRAIN_TIMER_OFFSET)
+
+#define HPIPE_TX_TRAIN_CTRL_5_REG		0x2A4
+#define HPIPE_TX_TRAIN_START_SQ_EN_OFFSET	11
+#define HPIPE_TX_TRAIN_START_SQ_EN_MASK		\
+				(0x1 << HPIPE_TX_TRAIN_START_SQ_EN_OFFSET)
+#define HPIPE_TX_TRAIN_START_FRM_DET_EN_OFFSET	12
+#define HPIPE_TX_TRAIN_START_FRM_DET_EN_MASK	\
+				(0x1 << HPIPE_TX_TRAIN_START_FRM_DET_EN_OFFSET)
+#define HPIPE_TX_TRAIN_START_FRM_LOCK_EN_OFFSET	13
+#define HPIPE_TX_TRAIN_START_FRM_LOCK_EN_MASK	\
+				(0x1 << HPIPE_TX_TRAIN_START_FRM_LOCK_EN_OFFSET)
+#define HPIPE_TX_TRAIN_WAIT_TIME_EN_OFFSET	14
+#define HPIPE_TX_TRAIN_WAIT_TIME_EN_MASK	\
+				(0x1 << HPIPE_TX_TRAIN_WAIT_TIME_EN_OFFSET)
+
+#define HPIPE_TX_TRAIN_REG			0x31C
+#define HPIPE_TX_TRAIN_CHK_INIT_OFFSET		4
+#define HPIPE_TX_TRAIN_CHK_INIT_MASK		\
+				(0x1 << HPIPE_TX_TRAIN_CHK_INIT_OFFSET)
+#define HPIPE_TX_TRAIN_COE_FM_PIN_PCIE3_OFFSET	7
+#define HPIPE_TX_TRAIN_COE_FM_PIN_PCIE3_MASK	\
+				(0x1 << HPIPE_TX_TRAIN_COE_FM_PIN_PCIE3_OFFSET)
+
+#define HPIPE_CDR_CONTROL_REG			0x418
+#define HPIPE_CDR_RX_MAX_DFE_ADAPT_0_OFFSET	14
+#define HPIPE_CDR_RX_MAX_DFE_ADAPT_0_MASK	\
+				(0x3 << HPIPE_CDR_RX_MAX_DFE_ADAPT_0_OFFSET)
+#define HPIPE_CDR_RX_MAX_DFE_ADAPT_1_OFFSET	12
+#define HPIPE_CDR_RX_MAX_DFE_ADAPT_1_MASK	\
+				(0x3 << HPIPE_CDR_RX_MAX_DFE_ADAPT_1_OFFSET)
+#define HPIPE_CDR_MAX_DFE_ADAPT_0_OFFSET	9
+#define HPIPE_CDR_MAX_DFE_ADAPT_0_MASK		\
+				(0x7 << HPIPE_CDR_MAX_DFE_ADAPT_0_OFFSET)
+#define HPIPE_CDR_MAX_DFE_ADAPT_1_OFFSET	6
+#define HPIPE_CDR_MAX_DFE_ADAPT_1_MASK		\
+				(0x7 << HPIPE_CDR_MAX_DFE_ADAPT_1_OFFSET)
+
+#define HPIPE_TX_TRAIN_CTRL_11_REG		0x438
+#define HPIPE_TX_STATUS_CHECK_MODE_OFFSET	6
+#define HPIPE_TX_TX_STATUS_CHECK_MODE_MASK	\
+				(0x1 << HPIPE_TX_STATUS_CHECK_MODE_OFFSET)
+#define HPIPE_TX_NUM_OF_PRESET_OFFSET		10
+#define HPIPE_TX_NUM_OF_PRESET_MASK		\
+				(0x7 << HPIPE_TX_NUM_OF_PRESET_OFFSET)
+#define HPIPE_TX_SWEEP_PRESET_EN_OFFSET		15
+#define HPIPE_TX_SWEEP_PRESET_EN_MASK		\
+				(0x1 << HPIPE_TX_SWEEP_PRESET_EN_OFFSET)
+#define HPIPE_G2_SETTINGS_4_REG			0x44C
+#define HPIPE_G2_DFE_RES_OFFSET			8
+#define HPIPE_G2_DFE_RES_MASK			(0x3 << HPIPE_G2_DFE_RES_OFFSET)
+
+#define HPIPE_G3_SETTING_3_REG			0x450
+#define HPIPE_G3_FFE_CAP_SEL_OFFSET		0
+#define HPIPE_G3_FFE_CAP_SEL_MASK		\
+				(0xf << HPIPE_G3_FFE_CAP_SEL_OFFSET)
+#define HPIPE_G3_FFE_RES_SEL_OFFSET		4
+#define HPIPE_G3_FFE_RES_SEL_MASK		\
+				(0x7 << HPIPE_G3_FFE_RES_SEL_OFFSET)
+#define HPIPE_G3_FFE_SETTING_FORCE_OFFSET	7
+#define HPIPE_G3_FFE_SETTING_FORCE_MASK		\
+				(0x1 << HPIPE_G3_FFE_SETTING_FORCE_OFFSET)
+#define HPIPE_G3_FFE_DEG_RES_LEVEL_OFFSET	12
+#define HPIPE_G3_FFE_DEG_RES_LEVEL_MASK		\
+				(0x3 << HPIPE_G3_FFE_DEG_RES_LEVEL_OFFSET)
+#define HPIPE_G3_FFE_LOAD_RES_LEVEL_OFFSET	14
+#define HPIPE_G3_FFE_LOAD_RES_LEVEL_MASK	\
+				(0x3 << HPIPE_G3_FFE_LOAD_RES_LEVEL_OFFSET)
+
+#define HPIPE_G3_SETTING_4_REG			0x454
+#define HPIPE_G3_DFE_RES_OFFSET			8
+#define HPIPE_G3_DFE_RES_MASK			(0x3 << HPIPE_G3_DFE_RES_OFFSET)
+
+#define HPIPE_DFE_CONTROL_REG			0x470
+#define HPIPE_DFE_TX_MAX_DFE_ADAPT_OFFSET	14
+#define HPIPE_DFE_TX_MAX_DFE_ADAPT_MASK		\
+				(0x3 << HPIPE_DFE_TX_MAX_DFE_ADAPT_OFFSET)
+
+#define HPIPE_DFE_CTRL_28_REG			0x49C
+#define HPIPE_DFE_CTRL_28_PIPE4_OFFSET		7
+#define HPIPE_DFE_CTRL_28_PIPE4_MASK		\
+				(0x1 << HPIPE_DFE_CTRL_28_PIPE4_OFFSET)
+
+#define HPIPE_G3_SETTING_5_REG			0x548
+#define HPIPE_G3_SETTING_5_G3_ICP_OFFSET	0
+#define HPIPE_G3_SETTING_5_G3_ICP_MASK		\
+				(0xf << HPIPE_G3_SETTING_5_G3_ICP_OFFSET)
+
+#define HPIPE_LANE_STATUS1_REG			0x60C
+#define HPIPE_LANE_STATUS1_PCLK_EN_OFFSET	0
+#define HPIPE_LANE_STATUS1_PCLK_EN_MASK		\
+				(0x1 << HPIPE_LANE_STATUS1_PCLK_EN_OFFSET)
+
+#define HPIPE_LANE_CFG4_REG			0x620
+#define HPIPE_LANE_CFG4_DFE_EN_SEL_OFFSET	3
+#define HPIPE_LANE_CFG4_DFE_EN_SEL_MASK		\
+				(0x1 << HPIPE_LANE_CFG4_DFE_EN_SEL_OFFSET)
+
+#define HPIPE_LANE_EQU_CONFIG_0_REG		0x69C
+#define HPIPE_CFG_EQ_FS_OFFSET			0
+#define HPIPE_CFG_EQ_FS_MASK			(0x3f << HPIPE_CFG_EQ_FS_OFFSET)
+#define HPIPE_CFG_EQ_LF_OFFSET			6
+#define HPIPE_CFG_EQ_LF_MASK			(0x3f << HPIPE_CFG_EQ_LF_OFFSET)
+#define HPIPE_CFG_PHY_RC_EP_OFFSET		12
+#define HPIPE_CFG_PHY_RC_EP_MASK		\
+				(0x1 << HPIPE_CFG_PHY_RC_EP_OFFSET)
+
+#define HPIPE_LANE_EQ_CFG1_REG			0x6a0
+#define HPIPE_CFG_UPDATE_POLARITY_OFFSET	12
+#define HPIPE_CFG_UPDATE_POLARITY_MASK		\
+				(0x1 << HPIPE_CFG_UPDATE_POLARITY_OFFSET)
+
+#define HPIPE_LANE_EQ_CFG2_REG			0x6a4
+#define HPIPE_CFG_EQ_BUNDLE_DIS_OFFSET		14
+#define HPIPE_CFG_EQ_BUNDLE_DIS_MASK		\
+				(0x1 << HPIPE_CFG_EQ_BUNDLE_DIS_OFFSET)
+
+#define HPIPE_LANE_PRESET_CFG0_REG		0x6a8
+#define HPIPE_CFG_CURSOR_PRESET0_OFFSET		0
+#define HPIPE_CFG_CURSOR_PRESET0_MASK		\
+				(0x3f << HPIPE_CFG_CURSOR_PRESET0_OFFSET)
+#define HPIPE_CFG_CURSOR_PRESET1_OFFSET		6
+#define HPIPE_CFG_CURSOR_PRESET1_MASK		\
+				(0x3f << HPIPE_CFG_CURSOR_PRESET1_OFFSET)
+
+#define HPIPE_LANE_PRESET_CFG1_REG		0x6ac
+#define HPIPE_CFG_CURSOR_PRESET2_OFFSET		0
+#define HPIPE_CFG_CURSOR_PRESET2_MASK		\
+				(0x3f << HPIPE_CFG_CURSOR_PRESET2_OFFSET)
+#define HPIPE_CFG_CURSOR_PRESET3_OFFSET		6
+#define HPIPE_CFG_CURSOR_PRESET3_MASK		\
+				(0x3f << HPIPE_CFG_CURSOR_PRESET3_OFFSET)
+
+#define HPIPE_LANE_PRESET_CFG2_REG		0x6b0
+#define HPIPE_CFG_CURSOR_PRESET4_OFFSET		0
+#define HPIPE_CFG_CURSOR_PRESET4_MASK		\
+				(0x3f << HPIPE_CFG_CURSOR_PRESET4_OFFSET)
+#define HPIPE_CFG_CURSOR_PRESET5_OFFSET		6
+#define HPIPE_CFG_CURSOR_PRESET5_MASK		\
+				(0x3f << HPIPE_CFG_CURSOR_PRESET5_OFFSET)
+
+#define HPIPE_LANE_PRESET_CFG3_REG		0x6b4
+#define HPIPE_CFG_CURSOR_PRESET6_OFFSET		0
+#define HPIPE_CFG_CURSOR_PRESET6_MASK		\
+				(0x3f << HPIPE_CFG_CURSOR_PRESET6_OFFSET)
+#define HPIPE_CFG_CURSOR_PRESET7_OFFSET		6
+#define HPIPE_CFG_CURSOR_PRESET7_MASK		\
+				(0x3f << HPIPE_CFG_CURSOR_PRESET7_OFFSET)
+
+#define HPIPE_LANE_PRESET_CFG4_REG		0x6b8
+#define HPIPE_CFG_CURSOR_PRESET8_OFFSET		0
+#define HPIPE_CFG_CURSOR_PRESET8_MASK		\
+				(0x3f << HPIPE_CFG_CURSOR_PRESET8_OFFSET)
+#define HPIPE_CFG_CURSOR_PRESET9_OFFSET		6
+#define HPIPE_CFG_CURSOR_PRESET9_MASK		\
+				(0x3f << HPIPE_CFG_CURSOR_PRESET9_OFFSET)
+
+#define HPIPE_LANE_PRESET_CFG5_REG		0x6bc
+#define HPIPE_CFG_CURSOR_PRESET10_OFFSET	0
+#define HPIPE_CFG_CURSOR_PRESET10_MASK		\
+				(0x3f << HPIPE_CFG_CURSOR_PRESET10_OFFSET)
+#define HPIPE_CFG_CURSOR_PRESET11_OFFSET	6
+#define HPIPE_CFG_CURSOR_PRESET11_MASK		\
+				(0x3f << HPIPE_CFG_CURSOR_PRESET11_OFFSET)
+
+#define HPIPE_LANE_PRESET_CFG6_REG		0x6c0
+#define HPIPE_CFG_PRE_CURSOR_PRESET0_OFFSET	0
+#define HPIPE_CFG_PRE_CURSOR_PRESET0_MASK	\
+				(0x3f << HPIPE_CFG_PRE_CURSOR_PRESET0_OFFSET)
+#define HPIPE_CFG_POST_CURSOR_PRESET0_OFFSET	6
+#define HPIPE_CFG_POST_CURSOR_PRESET0_MASK	\
+				(0x3f << HPIPE_CFG_POST_CURSOR_PRESET0_OFFSET)
+
+#define HPIPE_LANE_PRESET_CFG7_REG		0x6c4
+#define HPIPE_CFG_PRE_CURSOR_PRESET1_OFFSET	0
+#define HPIPE_CFG_PRE_CURSOR_PRESET1_MASK	\
+				(0x3f << HPIPE_CFG_PRE_CURSOR_PRESET1_OFFSET)
+#define HPIPE_CFG_POST_CURSOR_PRESET1_OFFSET	6
+#define HPIPE_CFG_POST_CURSOR_PRESET1_MASK	\
+				(0x3f << HPIPE_CFG_POST_CURSOR_PRESET1_OFFSET)
+
+#define HPIPE_LANE_PRESET_CFG8_REG		0x6c8
+#define HPIPE_CFG_PRE_CURSOR_PRESET2_OFFSET	0
+#define HPIPE_CFG_PRE_CURSOR_PRESET2_MASK	\
+				(0x3f << HPIPE_CFG_PRE_CURSOR_PRESET2_OFFSET)
+#define HPIPE_CFG_POST_CURSOR_PRESET2_OFFSET	6
+#define HPIPE_CFG_POST_CURSOR_PRESET2_MASK	\
+				(0x3f << HPIPE_CFG_POST_CURSOR_PRESET2_OFFSET)
+
+#define HPIPE_LANE_PRESET_CFG9_REG		0x6cc
+#define HPIPE_CFG_PRE_CURSOR_PRESET3_OFFSET	0
+#define HPIPE_CFG_PRE_CURSOR_PRESET3_MASK	\
+				(0x3f << HPIPE_CFG_PRE_CURSOR_PRESET3_OFFSET)
+#define HPIPE_CFG_POST_CURSOR_PRESET3_OFFSET	6
+#define HPIPE_CFG_POST_CURSOR_PRESET3_MASK	\
+				(0x3f << HPIPE_CFG_POST_CURSOR_PRESET3_OFFSET)
+
+#define HPIPE_LANE_PRESET_CFG10_REG		0x6d0
+#define HPIPE_CFG_PRE_CURSOR_PRESET4_OFFSET	0
+#define HPIPE_CFG_PRE_CURSOR_PRESET4_MASK	\
+				(0x3f << HPIPE_CFG_PRE_CURSOR_PRESET4_OFFSET)
+#define HPIPE_CFG_POST_CURSOR_PRESET4_OFFSET	6
+#define HPIPE_CFG_POST_CURSOR_PRESET4_MASK	\
+				(0x3f << HPIPE_CFG_POST_CURSOR_PRESET4_OFFSET)
+
+#define HPIPE_LANE_PRESET_CFG11_REG		0x6d4
+#define HPIPE_CFG_PRE_CURSOR_PRESET5_OFFSET	0
+#define HPIPE_CFG_PRE_CURSOR_PRESET5_MASK	\
+				(0x3f << HPIPE_CFG_PRE_CURSOR_PRESET5_OFFSET)
+#define HPIPE_CFG_POST_CURSOR_PRESET5_OFFSET	6
+#define HPIPE_CFG_POST_CURSOR_PRESET5_MASK	\
+				(0x3f << HPIPE_CFG_POST_CURSOR_PRESET5_OFFSET)
+
+#define HPIPE_LANE_PRESET_CFG12_REG		0x6d8
+#define HPIPE_CFG_PRE_CURSOR_PRESET6_OFFSET	0
+#define HPIPE_CFG_PRE_CURSOR_PRESET6_MASK	\
+				(0x3f << HPIPE_CFG_PRE_CURSOR_PRESET6_OFFSET)
+#define HPIPE_CFG_POST_CURSOR_PRESET6_OFFSET	6
+#define HPIPE_CFG_POST_CURSOR_PRESET6_MASK	\
+				(0x3f << HPIPE_CFG_POST_CURSOR_PRESET6_OFFSET)
+
+#define HPIPE_LANE_PRESET_CFG13_REG		0x6dc
+#define HPIPE_CFG_PRE_CURSOR_PRESET7_OFFSET	0
+#define HPIPE_CFG_PRE_CURSOR_PRESET7_MASK	\
+				(0x3f << HPIPE_CFG_PRE_CURSOR_PRESET7_OFFSET)
+#define HPIPE_CFG_POST_CURSOR_PRESET7_OFFSET	6
+#define HPIPE_CFG_POST_CURSOR_PRESET7_MASK	\
+				(0x3f << HPIPE_CFG_POST_CURSOR_PRESET7_OFFSET)
+
+#define HPIPE_LANE_PRESET_CFG14_REG		0x6e0
+#define HPIPE_CFG_PRE_CURSOR_PRESET8_OFFSET	0
+#define HPIPE_CFG_PRE_CURSOR_PRESET8_MASK	\
+				(0x3f << HPIPE_CFG_PRE_CURSOR_PRESET8_OFFSET)
+#define HPIPE_CFG_POST_CURSOR_PRESET8_OFFSET	6
+#define HPIPE_CFG_POST_CURSOR_PRESET8_MASK	\
+				(0x3f << HPIPE_CFG_POST_CURSOR_PRESET8_OFFSET)
+
+#define HPIPE_LANE_PRESET_CFG15_REG		0x6e4
+#define HPIPE_CFG_PRE_CURSOR_PRESET9_OFFSET	0
+#define HPIPE_CFG_PRE_CURSOR_PRESET9_MASK	\
+				(0x3f << HPIPE_CFG_PRE_CURSOR_PRESET9_OFFSET)
+#define HPIPE_CFG_POST_CURSOR_PRESET9_OFFSET	6
+#define HPIPE_CFG_POST_CURSOR_PRESET9_MASK	\
+				(0x3f << HPIPE_CFG_POST_CURSOR_PRESET9_OFFSET)
+
+#define HPIPE_LANE_PRESET_CFG16_REG		0x6e8
+#define HPIPE_CFG_PRE_CURSOR_PRESET10_OFFSET	0
+#define HPIPE_CFG_PRE_CURSOR_PRESET10_MASK	\
+				(0x3f << HPIPE_CFG_PRE_CURSOR_PRESET10_OFFSET)
+#define HPIPE_CFG_POST_CURSOR_PRESET10_OFFSET	6
+#define HPIPE_CFG_POST_CURSOR_PRESET10_MASK	\
+				(0x3f << HPIPE_CFG_POST_CURSOR_PRESET10_OFFSET)
+
+#define HPIPE_LANE_EQ_REMOTE_SETTING_REG	0x6f8
+#define HPIPE_LANE_CFG_FOM_DIRN_OVERRIDE_OFFSET	0
+#define HPIPE_LANE_CFG_FOM_DIRN_OVERRIDE_MASK	\
+				(0x1 << HPIPE_LANE_CFG_FOM_DIRN_OVERRIDE_OFFSET)
+#define HPIPE_LANE_CFG_FOM_ONLY_MODE_OFFFSET	1
+#define HPIPE_LANE_CFG_FOM_ONLY_MODE_MASK	\
+				(0x1 << HPIPE_LANE_CFG_FOM_ONLY_MODE_OFFFSET)
+#define HPIPE_LANE_CFG_FOM_PRESET_VECTOR_OFFSET	2
+#define HPIPE_LANE_CFG_FOM_PRESET_VECTOR_MASK	\
+				(0xf << HPIPE_LANE_CFG_FOM_PRESET_VECTOR_OFFSET)
+
+#define HPIPE_RST_CLK_CTRL_REG			0x704
+#define HPIPE_RST_CLK_CTRL_PIPE_RST_OFFSET	0
+#define HPIPE_RST_CLK_CTRL_PIPE_RST_MASK	\
+				(0x1 << HPIPE_RST_CLK_CTRL_PIPE_RST_OFFSET)
+#define HPIPE_RST_CLK_CTRL_FIXED_PCLK_OFFSET	2
+#define HPIPE_RST_CLK_CTRL_FIXED_PCLK_MASK	\
+				(0x1 << HPIPE_RST_CLK_CTRL_FIXED_PCLK_OFFSET)
+#define HPIPE_RST_CLK_CTRL_PIPE_WIDTH_OFFSET	3
+#define HPIPE_RST_CLK_CTRL_PIPE_WIDTH_MASK	\
+				(0x1 << HPIPE_RST_CLK_CTRL_PIPE_WIDTH_OFFSET)
+#define HPIPE_RST_CLK_CTRL_CORE_FREQ_SEL_OFFSET	9
+#define HPIPE_RST_CLK_CTRL_CORE_FREQ_SEL_MASK	\
+				(0x1 << HPIPE_RST_CLK_CTRL_CORE_FREQ_SEL_OFFSET)
+
+#define HPIPE_CLK_SRC_LO_REG				0x70c
+#define HPIPE_CLK_SRC_LO_BUNDLE_PERIOD_SEL_OFFSET	1
+#define HPIPE_CLK_SRC_LO_BUNDLE_PERIOD_SEL_MASK		\
+			(0x1 << HPIPE_CLK_SRC_LO_BUNDLE_PERIOD_SEL_OFFSET)
+#define HPIPE_CLK_SRC_LO_BUNDLE_PERIOD_SCALE_OFFSET	2
+#define HPIPE_CLK_SRC_LO_BUNDLE_PERIOD_SCALE_MASK	\
+			(0x3 << HPIPE_CLK_SRC_LO_BUNDLE_PERIOD_SCALE_OFFSET)
+#define HPIPE_CLK_SRC_LO_PLL_RDY_DL_OFFSET		5
+#define HPIPE_CLK_SRC_LO_PLL_RDY_DL_MASK		\
+			(0x7 << HPIPE_CLK_SRC_LO_PLL_RDY_DL_OFFSET)
+
+#define HPIPE_CLK_SRC_HI_REG			0x710
+#define HPIPE_CLK_SRC_HI_LANE_STRT_OFFSET	0
+#define HPIPE_CLK_SRC_HI_LANE_STRT_MASK		\
+			(0x1 << HPIPE_CLK_SRC_HI_LANE_STRT_OFFSET)
+#define HPIPE_CLK_SRC_HI_LANE_BREAK_OFFSET	1
+#define HPIPE_CLK_SRC_HI_LANE_BREAK_MASK	\
+			(0x1 << HPIPE_CLK_SRC_HI_LANE_BREAK_OFFSET)
+#define HPIPE_CLK_SRC_HI_LANE_MASTER_OFFSET	2
+#define HPIPE_CLK_SRC_HI_LANE_MASTER_MASK	\
+			(0x1 << HPIPE_CLK_SRC_HI_LANE_MASTER_OFFSET)
+#define HPIPE_CLK_SRC_HI_MODE_PIPE_OFFSET	7
+#define HPIPE_CLK_SRC_HI_MODE_PIPE_MASK		\
+			(0x1 << HPIPE_CLK_SRC_HI_MODE_PIPE_OFFSET)
+
+#define HPIPE_GLOBAL_PM_CTRL			0x740
+#define HPIPE_GLOBAL_PM_RXDLOZ_WAIT_OFFSET	0
+#define HPIPE_GLOBAL_PM_RXDLOZ_WAIT_MASK	\
+			(0xFF << HPIPE_GLOBAL_PM_RXDLOZ_WAIT_OFFSET)
+
+#endif /* COMPHY_H */
diff --git a/drivers/marvell/comphy/comphy-cp110.h b/drivers/marvell/comphy/comphy-cp110.h
new file mode 100644
index 0000000..af5c715
--- /dev/null
+++ b/drivers/marvell/comphy/comphy-cp110.h
@@ -0,0 +1,914 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+/* Marvell CP110 SoC COMPHY unit driver */
+
+#ifndef COMPHY_CP110_H
+#define COMPHY_CP110_H
+
+#define SD_ADDR(base, lane)			(base + 0x1000 * lane)
+#define HPIPE_ADDR(base, lane)			(SD_ADDR(base, lane) + 0x800)
+#define COMPHY_ADDR(base, lane)			(base + 0x28 * lane)
+
+#define MAX_NUM_OF_FFE				8
+#define RX_TRAINING_TIMEOUT			500
+
+/* Comphy registers */
+#define COMMON_PHY_CFG1_REG			0x0
+#define COMMON_PHY_CFG1_PWR_UP_OFFSET		1
+#define COMMON_PHY_CFG1_PWR_UP_MASK		\
+				(0x1 << COMMON_PHY_CFG1_PWR_UP_OFFSET)
+#define COMMON_PHY_CFG1_PIPE_SELECT_OFFSET	2
+#define COMMON_PHY_CFG1_PIPE_SELECT_MASK	\
+				(0x1 << COMMON_PHY_CFG1_PIPE_SELECT_OFFSET)
+#define COMMON_PHY_CFG1_CORE_RSTN_OFFSET	13
+#define COMMON_PHY_CFG1_CORE_RSTN_MASK		\
+				(0x1 << COMMON_PHY_CFG1_CORE_RSTN_OFFSET)
+#define COMMON_PHY_CFG1_PWR_ON_RESET_OFFSET	14
+#define COMMON_PHY_CFG1_PWR_ON_RESET_MASK	\
+				(0x1 << COMMON_PHY_CFG1_PWR_ON_RESET_OFFSET)
+#define COMMON_PHY_PHY_MODE_OFFSET		15
+#define COMMON_PHY_PHY_MODE_MASK		\
+				(0x1 << COMMON_PHY_PHY_MODE_OFFSET)
+
+#define COMMON_PHY_CFG6_REG			0x14
+#define COMMON_PHY_CFG6_IF_40_SEL_OFFSET	18
+#define COMMON_PHY_CFG6_IF_40_SEL_MASK		\
+				(0x1 << COMMON_PHY_CFG6_IF_40_SEL_OFFSET)
+
+#define COMMON_PHY_CFG6_REG			0x14
+#define COMMON_PHY_CFG6_IF_40_SEL_OFFSET	18
+#define COMMON_PHY_CFG6_IF_40_SEL_MASK		\
+				(0x1 << COMMON_PHY_CFG6_IF_40_SEL_OFFSET)
+
+#define COMMON_SELECTOR_PHY_REG_OFFSET		0x140
+#define COMMON_SELECTOR_PIPE_REG_OFFSET		0x144
+#define COMMON_SELECTOR_COMPHY_MASK		0xf
+#define COMMON_SELECTOR_COMPHYN_FIELD_WIDTH	4
+#define COMMON_SELECTOR_COMPHYN_SATA		0x4
+#define COMMON_SELECTOR_PIPE_COMPHY_PCIE	0x4
+#define COMMON_SELECTOR_PIPE_COMPHY_USBH	0x1
+#define COMMON_SELECTOR_PIPE_COMPHY_USBD	0x2
+
+/* SGMII/Base-X/SFI/RXAUI */
+#define COMMON_SELECTOR_COMPHY0_1_2_NETWORK	0x1
+#define COMMON_SELECTOR_COMPHY3_RXAUI		0x1
+#define COMMON_SELECTOR_COMPHY3_SGMII		0x2
+#define COMMON_SELECTOR_COMPHY4_PORT1		0x1
+#define COMMON_SELECTOR_COMPHY4_ALL_OTHERS	0x2
+#define COMMON_SELECTOR_COMPHY5_RXAUI		0x2
+#define COMMON_SELECTOR_COMPHY5_SGMII		0x1
+
+#define COMMON_PHY_SD_CTRL1			0x148
+#define COMMON_PHY_SD_CTRL1_COMPHY_0_PORT_OFFSET	0
+#define COMMON_PHY_SD_CTRL1_COMPHY_1_PORT_OFFSET	4
+#define COMMON_PHY_SD_CTRL1_COMPHY_2_PORT_OFFSET	8
+#define COMMON_PHY_SD_CTRL1_COMPHY_3_PORT_OFFSET	12
+#define COMMON_PHY_SD_CTRL1_COMPHY_0_3_PORT_MASK	0xFFFF
+#define COMMON_PHY_SD_CTRL1_COMPHY_0_1_PORT_MASK	0xFF
+#define COMMON_PHY_SD_CTRL1_PCIE_X4_EN_OFFSET	24
+#define COMMON_PHY_SD_CTRL1_PCIE_X4_EN_MASK	\
+				(0x1 << COMMON_PHY_SD_CTRL1_PCIE_X4_EN_OFFSET)
+#define COMMON_PHY_SD_CTRL1_PCIE_X2_EN_OFFSET	25
+#define COMMON_PHY_SD_CTRL1_PCIE_X2_EN_MASK	\
+				(0x1 << COMMON_PHY_SD_CTRL1_PCIE_X2_EN_OFFSET)
+#define COMMON_PHY_SD_CTRL1_RXAUI1_OFFSET	26
+#define COMMON_PHY_SD_CTRL1_RXAUI1_MASK		\
+				(0x1 << COMMON_PHY_SD_CTRL1_RXAUI1_OFFSET)
+#define COMMON_PHY_SD_CTRL1_RXAUI0_OFFSET	27
+#define COMMON_PHY_SD_CTRL1_RXAUI0_MASK		\
+				(0x1 << COMMON_PHY_SD_CTRL1_RXAUI0_OFFSET)
+
+/* DFX register */
+#define DFX_BASE				(0x400000)
+#define DFX_DEV_GEN_CTRL12_REG			(0x280)
+#define DFX_DEV_GEN_PCIE_CLK_SRC_MUX		(0x3)
+#define DFX_DEV_GEN_PCIE_CLK_SRC_OFFSET		7
+#define DFX_DEV_GEN_PCIE_CLK_SRC_MASK		\
+				(0x3 << DFX_DEV_GEN_PCIE_CLK_SRC_OFFSET)
+
+/* SerDes IP registers */
+#define SD_EXTERNAL_CONFIG0_REG				0
+#define SD_EXTERNAL_CONFIG0_SD_PU_PLL_OFFSET		1
+#define SD_EXTERNAL_CONFIG0_SD_PU_PLL_MASK		\
+			(1 << SD_EXTERNAL_CONFIG0_SD_PU_PLL_OFFSET)
+#define SD_EXTERNAL_CONFIG0_SD_PHY_GEN_RX_OFFSET	3
+#define SD_EXTERNAL_CONFIG0_SD_PHY_GEN_RX_MASK		\
+			(0xf << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_RX_OFFSET)
+#define SD_EXTERNAL_CONFIG0_SD_PHY_GEN_TX_OFFSET	7
+#define SD_EXTERNAL_CONFIG0_SD_PHY_GEN_TX_MASK		\
+			(0xf << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_TX_OFFSET)
+#define SD_EXTERNAL_CONFIG0_SD_PU_RX_OFFSET		11
+#define SD_EXTERNAL_CONFIG0_SD_PU_RX_MASK		\
+			(1 << SD_EXTERNAL_CONFIG0_SD_PU_RX_OFFSET)
+#define SD_EXTERNAL_CONFIG0_SD_PU_TX_OFFSET		12
+#define SD_EXTERNAL_CONFIG0_SD_PU_TX_MASK		\
+			(1 << SD_EXTERNAL_CONFIG0_SD_PU_TX_OFFSET)
+#define SD_EXTERNAL_CONFIG0_HALF_BUS_MODE_OFFSET	14
+#define SD_EXTERNAL_CONFIG0_HALF_BUS_MODE_MASK		\
+			(1 << SD_EXTERNAL_CONFIG0_HALF_BUS_MODE_OFFSET)
+#define SD_EXTERNAL_CONFIG0_MEDIA_MODE_OFFSET		15
+#define SD_EXTERNAL_CONFIG0_MEDIA_MODE_MASK		\
+			(0x1 << SD_EXTERNAL_CONFIG0_MEDIA_MODE_OFFSET)
+
+#define SD_EXTERNAL_CONFIG1_REG			0x4
+#define SD_EXTERNAL_CONFIG1_TX_IDLE_OFFSET	2
+#define SD_EXTERNAL_CONFIG1_TX_IDLE_MASK	\
+			(0x1 << SD_EXTERNAL_CONFIG1_TX_IDLE_OFFSET)
+#define SD_EXTERNAL_CONFIG1_RESET_IN_OFFSET	3
+#define SD_EXTERNAL_CONFIG1_RESET_IN_MASK	\
+			(0x1 << SD_EXTERNAL_CONFIG1_RESET_IN_OFFSET)
+#define SD_EXTERNAL_CONFIG1_RX_INIT_OFFSET	4
+#define SD_EXTERNAL_CONFIG1_RX_INIT_MASK	\
+			(0x1 << SD_EXTERNAL_CONFIG1_RX_INIT_OFFSET)
+#define SD_EXTERNAL_CONFIG1_RESET_CORE_OFFSET	5
+#define SD_EXTERNAL_CONFIG1_RESET_CORE_MASK	\
+			(0x1 << SD_EXTERNAL_CONFIG1_RESET_CORE_OFFSET)
+#define SD_EXTERNAL_CONFIG1_RF_RESET_IN_OFFSET	6
+#define SD_EXTERNAL_CONFIG1_RF_RESET_IN_MASK	\
+			(0x1 << SD_EXTERNAL_CONFIG1_RF_RESET_IN_OFFSET)
+
+#define SD_EXTERNAL_CONFIG2_REG			0x8
+#define SD_EXTERNAL_CONFIG2_PIN_DFE_EN_OFFSET	4
+#define SD_EXTERNAL_CONFIG2_PIN_DFE_EN_MASK	\
+			(0x1 << SD_EXTERNAL_CONFIG2_PIN_DFE_EN_OFFSET)
+#define SD_EXTERNAL_CONFIG2_SSC_ENABLE_OFFSET	7
+#define SD_EXTERNAL_CONFIG2_SSC_ENABLE_MASK	\
+			(0x1 << SD_EXTERNAL_CONFIG2_SSC_ENABLE_OFFSET)
+
+#define SD_EXTERNAL_STATUS_REG				0xc
+#define SD_EXTERNAL_STATUS_START_RX_TRAINING_OFFSET	7
+#define SD_EXTERNAL_STATUS_START_RX_TRAINING_MASK	\
+			(1 << SD_EXTERNAL_STATUS_START_RX_TRAINING_OFFSET)
+
+#define SD_EXTERNAL_STATUS0_REG			0x18
+#define SD_EXTERNAL_STATUS0_PLL_TX_OFFSET	2
+#define SD_EXTERNAL_STATUS0_PLL_TX_MASK		\
+			(0x1 << SD_EXTERNAL_STATUS0_PLL_TX_OFFSET)
+#define SD_EXTERNAL_STATUS0_PLL_RX_OFFSET	3
+#define SD_EXTERNAL_STATUS0_PLL_RX_MASK		\
+			(0x1 << SD_EXTERNAL_STATUS0_PLL_RX_OFFSET)
+#define SD_EXTERNAL_STATUS0_RX_INIT_OFFSET	4
+#define SD_EXTERNAL_STATUS0_RX_INIT_MASK	\
+			(0x1 << SD_EXTERNAL_STATUS0_RX_INIT_OFFSET)
+
+#define SD_EXTERNAL_STATAUS1_REG			0x1c
+#define SD_EXTERNAL_STATAUS1_REG_RX_TRAIN_COMP_OFFSET	0
+#define SD_EXTERNAL_STATAUS1_REG_RX_TRAIN_COMP_MASK	\
+	(1 << SD_EXTERNAL_STATAUS1_REG_RX_TRAIN_COMP_OFFSET)
+#define SD_EXTERNAL_STATAUS1_REG_RX_TRAIN_FAILED_OFFSET	1
+#define SD_EXTERNAL_STATAUS1_REG_RX_TRAIN_FAILED_MASK	\
+	(1 << SD_EXTERNAL_STATAUS1_REG_RX_TRAIN_FAILED_OFFSET)
+
+/* HPIPE registers */
+#define HPIPE_PWR_PLL_REG			0x4
+#define HPIPE_PWR_PLL_REF_FREQ_OFFSET		0
+#define HPIPE_PWR_PLL_REF_FREQ_MASK		\
+			(0x1f << HPIPE_PWR_PLL_REF_FREQ_OFFSET)
+#define HPIPE_PWR_PLL_PHY_MODE_OFFSET		5
+#define HPIPE_PWR_PLL_PHY_MODE_MASK		\
+			(0x7 << HPIPE_PWR_PLL_PHY_MODE_OFFSET)
+
+#define HPIPE_CAL_REG1_REG			0xc
+#define HPIPE_CAL_REG_1_EXT_TXIMP_OFFSET	10
+#define HPIPE_CAL_REG_1_EXT_TXIMP_MASK		\
+			(0x1f << HPIPE_CAL_REG_1_EXT_TXIMP_OFFSET)
+#define HPIPE_CAL_REG_1_EXT_TXIMP_EN_OFFSET	15
+#define HPIPE_CAL_REG_1_EXT_TXIMP_EN_MASK	\
+			(0x1 << HPIPE_CAL_REG_1_EXT_TXIMP_EN_OFFSET)
+
+#define HPIPE_SQUELCH_FFE_SETTING_REG		0x18
+#define HPIPE_SQUELCH_THRESH_IN_OFFSET		8
+#define HPIPE_SQUELCH_THRESH_IN_MASK		\
+			(0xf << HPIPE_SQUELCH_THRESH_IN_OFFSET)
+#define HPIPE_SQUELCH_DETECTED_OFFSET		14
+#define HPIPE_SQUELCH_DETECTED_MASK		\
+			(0x1 << HPIPE_SQUELCH_DETECTED_OFFSET)
+
+#define HPIPE_DFE_REG0				0x1c
+#define HPIPE_DFE_RES_FORCE_OFFSET		15
+#define HPIPE_DFE_RES_FORCE_MASK		\
+			(0x1 << HPIPE_DFE_RES_FORCE_OFFSET)
+
+#define HPIPE_DFE_F3_F5_REG			0x28
+#define HPIPE_DFE_F3_F5_DFE_EN_OFFSET		14
+#define HPIPE_DFE_F3_F5_DFE_EN_MASK		\
+			(0x1 << HPIPE_DFE_F3_F5_DFE_EN_OFFSET)
+#define HPIPE_DFE_F3_F5_DFE_CTRL_OFFSET		15
+#define HPIPE_DFE_F3_F5_DFE_CTRL_MASK		\
+			(0x1 << HPIPE_DFE_F3_F5_DFE_CTRL_OFFSET)
+
+#define HPIPE_ADAPTED_DFE_COEFFICIENT_1_REG	0x30
+#define HPIPE_ADAPTED_DFE_RES_OFFSET		13
+#define HPIPE_ADAPTED_DFE_RES_MASK		\
+			(0x3 << HPIPE_ADAPTED_DFE_RES_OFFSET)
+
+#define HPIPE_G1_SET_0_REG			0x34
+#define HPIPE_G1_SET_0_G1_TX_AMP_OFFSET		1
+#define HPIPE_G1_SET_0_G1_TX_AMP_MASK		\
+			(0x1f << HPIPE_G1_SET_0_G1_TX_AMP_OFFSET)
+#define HPIPE_G1_SET_0_G1_TX_AMP_ADJ_OFFSET	6
+#define HPIPE_G1_SET_0_G1_TX_AMP_ADJ_MASK	\
+			(0x1 << HPIPE_G1_SET_0_G1_TX_AMP_ADJ_OFFSET)
+#define HPIPE_G1_SET_0_G1_TX_EMPH1_OFFSET	7
+#define HPIPE_G1_SET_0_G1_TX_EMPH1_MASK		\
+			(0xf << HPIPE_G1_SET_0_G1_TX_EMPH1_OFFSET)
+#define HPIPE_G1_SET_0_G1_TX_EMPH1_EN_OFFSET	11
+#define HPIPE_G1_SET_0_G1_TX_EMPH1_EN_MASK	\
+			(0x1 << HPIPE_G1_SET_0_G1_TX_EMPH1_EN_OFFSET)
+
+#define HPIPE_G1_SET_1_REG			0x38
+#define HPIPE_G1_SET_1_G1_RX_SELMUPI_OFFSET	0
+#define HPIPE_G1_SET_1_G1_RX_SELMUPI_MASK	\
+			(0x7 << HPIPE_G1_SET_1_G1_RX_SELMUPI_OFFSET)
+#define HPIPE_G1_SET_1_G1_RX_SELMUPF_OFFSET	3
+#define HPIPE_G1_SET_1_G1_RX_SELMUPF_MASK	\
+			(0x7 << HPIPE_G1_SET_1_G1_RX_SELMUPF_OFFSET)
+#define HPIPE_G1_SET_1_G1_RX_SELMUFI_OFFSET	6
+#define HPIPE_G1_SET_1_G1_RX_SELMUFI_MASK	\
+			(0x3 << HPIPE_G1_SET_1_G1_RX_SELMUFI_OFFSET)
+#define HPIPE_G1_SET_1_G1_RX_SELMUFF_OFFSET	8
+#define HPIPE_G1_SET_1_G1_RX_SELMUFF_MASK	\
+			(0x3 << HPIPE_G1_SET_1_G1_RX_SELMUFF_OFFSET)
+#define HPIPE_G1_SET_1_G1_RX_DFE_EN_OFFSET	10
+#define HPIPE_G1_SET_1_G1_RX_DFE_EN_MASK	\
+			(0x1 << HPIPE_G1_SET_1_G1_RX_DFE_EN_OFFSET)
+#define HPIPE_G1_SET_1_G1_RX_DIGCK_DIV_OFFSET	11
+#define HPIPE_G1_SET_1_G1_RX_DIGCK_DIV_MASK	\
+			(0x3 << HPIPE_G1_SET_1_G1_RX_DIGCK_DIV_OFFSET)
+
+#define HPIPE_G2_SET_0_REG			0x3c
+#define HPIPE_G2_SET_0_G2_TX_AMP_OFFSET		1
+#define HPIPE_G2_SET_0_G2_TX_AMP_MASK		\
+			(0x1f << HPIPE_G2_SET_0_G2_TX_AMP_OFFSET)
+#define HPIPE_G2_SET_0_G2_TX_AMP_ADJ_OFFSET	6
+#define HPIPE_G2_SET_0_G2_TX_AMP_ADJ_MASK	\
+			(0x1 << HPIPE_G2_SET_0_G2_TX_AMP_ADJ_OFFSET)
+#define HPIPE_G2_SET_0_G2_TX_EMPH1_OFFSET	7
+#define HPIPE_G2_SET_0_G2_TX_EMPH1_MASK		\
+			(0xf << HPIPE_G2_SET_0_G2_TX_EMPH1_OFFSET)
+#define HPIPE_G2_SET_0_G2_TX_EMPH1_EN_OFFSET	11
+#define HPIPE_G2_SET_0_G2_TX_EMPH1_EN_MASK	\
+			(0x1 << HPIPE_G2_SET_0_G2_TX_EMPH1_EN_OFFSET)
+
+#define HPIPE_G2_SET_1_REG			0x40
+#define HPIPE_G2_SET_1_G2_RX_SELMUPI_OFFSET	0
+#define HPIPE_G2_SET_1_G2_RX_SELMUPI_MASK	\
+			(0x7 << HPIPE_G2_SET_1_G2_RX_SELMUPI_OFFSET)
+#define HPIPE_G2_SET_1_G2_RX_SELMUPF_OFFSET	3
+#define HPIPE_G2_SET_1_G2_RX_SELMUPF_MASK	\
+			(0x7 << HPIPE_G2_SET_1_G2_RX_SELMUPF_OFFSET)
+#define HPIPE_G2_SET_1_G2_RX_SELMUFI_OFFSET	6
+#define HPIPE_G2_SET_1_G2_RX_SELMUFI_MASK	\
+			(0x3 << HPIPE_G2_SET_1_G2_RX_SELMUFI_OFFSET)
+#define HPIPE_G2_SET_1_G2_RX_SELMUFF_OFFSET	8
+#define HPIPE_G2_SET_1_G2_RX_SELMUFF_MASK	\
+			(0x3 << HPIPE_G2_SET_1_G2_RX_SELMUFF_OFFSET)
+#define HPIPE_G2_SET_1_G2_RX_DFE_EN_OFFSET	10
+#define HPIPE_G2_SET_1_G2_RX_DFE_EN_MASK	\
+			(0x1 << HPIPE_G2_SET_1_G2_RX_DFE_EN_OFFSET)
+#define HPIPE_G2_SET_1_G2_RX_DIGCK_DIV_OFFSET	11
+#define HPIPE_G2_SET_1_G2_RX_DIGCK_DIV_MASK	\
+			(0x3 << HPIPE_G2_SET_1_G2_RX_DIGCK_DIV_OFFSET)
+
+#define HPIPE_G3_SET_0_REG			0x44
+#define HPIPE_G3_SET_0_G3_TX_AMP_OFFSET		1
+#define HPIPE_G3_SET_0_G3_TX_AMP_MASK		\
+			(0x1f << HPIPE_G3_SET_0_G3_TX_AMP_OFFSET)
+#define HPIPE_G3_SET_0_G3_TX_AMP_ADJ_OFFSET	6
+#define HPIPE_G3_SET_0_G3_TX_AMP_ADJ_MASK	\
+			(0x1 << HPIPE_G3_SET_0_G3_TX_AMP_ADJ_OFFSET)
+#define HPIPE_G3_SET_0_G3_TX_EMPH1_OFFSET	7
+#define HPIPE_G3_SET_0_G3_TX_EMPH1_MASK		\
+			(0xf << HPIPE_G3_SET_0_G3_TX_EMPH1_OFFSET)
+#define HPIPE_G3_SET_0_G3_TX_EMPH1_EN_OFFSET	11
+#define HPIPE_G3_SET_0_G3_TX_EMPH1_EN_MASK	\
+			(0x1 << HPIPE_G3_SET_0_G3_TX_EMPH1_EN_OFFSET)
+#define HPIPE_G3_SET_0_G3_TX_SLEW_RATE_SEL_OFFSET 12
+#define HPIPE_G3_SET_0_G3_TX_SLEW_RATE_SEL_MASK	\
+			(0x7 << HPIPE_G3_SET_0_G3_TX_SLEW_RATE_SEL_OFFSET)
+#define HPIPE_G3_SET_0_G3_TX_SLEW_CTRL_EN_OFFSET 15
+#define HPIPE_G3_SET_0_G3_TX_SLEW_CTRL_EN_MASK	\
+			(0x1 << HPIPE_G3_SET_0_G3_TX_SLEW_CTRL_EN_OFFSET)
+
+#define HPIPE_G3_SET_1_REG				0x48
+#define HPIPE_G3_SET_1_G3_RX_SELMUPI_OFFSET		0
+#define HPIPE_G3_SET_1_G3_RX_SELMUPI_MASK		\
+			(0x7 << HPIPE_G3_SET_1_G3_RX_SELMUPI_OFFSET)
+#define HPIPE_G3_SET_1_G3_RX_SELMUPF_OFFSET		3
+#define HPIPE_G3_SET_1_G3_RX_SELMUPF_MASK		\
+			(0x7 << HPIPE_G3_SET_1_G3_RX_SELMUPF_OFFSET)
+#define HPIPE_G3_SET_1_G3_RX_SELMUFI_OFFSET		6
+#define HPIPE_G3_SET_1_G3_RX_SELMUFI_MASK		\
+			(0x3 << HPIPE_G3_SET_1_G3_RX_SELMUFI_OFFSET)
+#define HPIPE_G3_SET_1_G3_RX_SELMUFF_OFFSET		8
+#define HPIPE_G3_SET_1_G3_RX_SELMUFF_MASK		\
+			(0x3 << HPIPE_G3_SET_1_G3_RX_SELMUFF_OFFSET)
+#define HPIPE_G3_SET_1_G3_RX_DFE_EN_OFFSET		10
+#define HPIPE_G3_SET_1_G3_RX_DFE_EN_MASK		\
+			(0x1 << HPIPE_G3_SET_1_G3_RX_DFE_EN_OFFSET)
+#define HPIPE_G3_SET_1_G3_RX_DIGCK_DIV_OFFSET		11
+#define HPIPE_G3_SET_1_G3_RX_DIGCK_DIV_MASK		\
+			(0x3 << HPIPE_G3_SET_1_G3_RX_DIGCK_DIV_OFFSET)
+#define HPIPE_G3_SET_1_G3_SAMPLER_INPAIRX2_EN_OFFSET	13
+#define HPIPE_G3_SET_1_G3_SAMPLER_INPAIRX2_EN_MASK	\
+			(0x1 << HPIPE_G3_SET_1_G3_SAMPLER_INPAIRX2_EN_OFFSET)
+
+#define HPIPE_PHY_TEST_CONTROL_REG		0x54
+#define HPIPE_PHY_TEST_PATTERN_SEL_OFFSET	4
+#define HPIPE_PHY_TEST_PATTERN_SEL_MASK		\
+			(0xf << HPIPE_PHY_TEST_PATTERN_SEL_OFFSET)
+#define HPIPE_PHY_TEST_RESET_OFFSET		14
+#define HPIPE_PHY_TEST_RESET_MASK		\
+			(0x1 << HPIPE_PHY_TEST_RESET_OFFSET)
+#define HPIPE_PHY_TEST_EN_OFFSET		15
+#define HPIPE_PHY_TEST_EN_MASK			\
+			(0x1 << HPIPE_PHY_TEST_EN_OFFSET)
+
+#define HPIPE_PHY_TEST_DATA_REG			0x6c
+#define HPIPE_PHY_TEST_DATA_OFFSET		0
+#define HPIPE_PHY_TEST_DATA_MASK		\
+			(0xffff << HPIPE_PHY_TEST_DATA_OFFSET)
+
+#define HPIPE_PHY_TEST_PRBS_ERROR_COUNTER_1_REG	0x80
+
+#define HPIPE_PHY_TEST_OOB_0_REGISTER		0x84
+#define HPIPE_PHY_PT_OOB_EN_OFFSET		14
+#define HPIPE_PHY_PT_OOB_EN_MASK		\
+			(0x1 << HPIPE_PHY_PT_OOB_EN_OFFSET)
+#define HPIPE_PHY_TEST_PT_TESTMODE_OFFSET	12
+#define HPIPE_PHY_TEST_PT_TESTMODE_MASK		\
+			(0x3 << HPIPE_PHY_TEST_PT_TESTMODE_OFFSET)
+
+#define HPIPE_LOOPBACK_REG			0x8c
+#define HPIPE_LOOPBACK_SEL_OFFSET		1
+#define HPIPE_LOOPBACK_SEL_MASK			\
+			(0x7 << HPIPE_LOOPBACK_SEL_OFFSET)
+#define HPIPE_CDR_LOCK_OFFSET			7
+#define HPIPE_CDR_LOCK_MASK			\
+			(0x1 << HPIPE_CDR_LOCK_OFFSET)
+#define HPIPE_CDR_LOCK_DET_EN_OFFSET		8
+#define HPIPE_CDR_LOCK_DET_EN_MASK		\
+			(0x1 << HPIPE_CDR_LOCK_DET_EN_OFFSET)
+
+#define HPIPE_SYNC_PATTERN_REG			0x090
+#define HPIPE_SYNC_PATTERN_TXD_INV_OFFSET	10
+#define HPIPE_SYNC_PATTERN_TXD_INV_MASK	\
+	(0x1 << HPIPE_SYNC_PATTERN_TXD_INV_OFFSET)
+#define HPIPE_SYNC_PATTERN_RXD_INV_OFFSET	11
+#define HPIPE_SYNC_PATTERN_RXD_INV_MASK	\
+	(0x1 << HPIPE_SYNC_PATTERN_RXD_INV_OFFSET)
+
+#define HPIPE_INTERFACE_REG			0x94
+#define HPIPE_INTERFACE_GEN_MAX_OFFSET		10
+#define HPIPE_INTERFACE_GEN_MAX_MASK		\
+			(0x3 << HPIPE_INTERFACE_GEN_MAX_OFFSET)
+#define HPIPE_INTERFACE_DET_BYPASS_OFFSET	12
+#define HPIPE_INTERFACE_DET_BYPASS_MASK		\
+			(0x1 << HPIPE_INTERFACE_DET_BYPASS_OFFSET)
+#define HPIPE_INTERFACE_LINK_TRAIN_OFFSET	14
+#define HPIPE_INTERFACE_LINK_TRAIN_MASK		\
+			(0x1 << HPIPE_INTERFACE_LINK_TRAIN_OFFSET)
+
+#define HPIPE_G1_SET_2_REG			0xf4
+#define HPIPE_G1_SET_2_G1_TX_EMPH0_OFFSET	0
+#define HPIPE_G1_SET_2_G1_TX_EMPH0_MASK		\
+			(0xf << HPIPE_G1_SET_2_G1_TX_EMPH0_OFFSET)
+#define HPIPE_G1_SET_2_G1_TX_EMPH0_EN_OFFSET	4
+#define HPIPE_G1_SET_2_G1_TX_EMPH0_EN_MASK	\
+			(0x1 << HPIPE_G1_SET_2_G1_TX_EMPH0_EN_OFFSET)
+
+#define HPIPE_G2_SET_2_REG			0xf8
+#define HPIPE_G2_SET_2_G2_TX_EMPH0_OFFSET	0
+#define HPIPE_G2_SET_2_G2_TX_EMPH0_MASK		\
+			(0xf << HPIPE_G2_SET_2_G2_TX_EMPH0_OFFSET)
+#define HPIPE_G2_SET_2_G2_TX_EMPH0_EN_OFFSET	4
+#define HPIPE_G2_SET_2_G2_TX_EMPH0_EN_MASK	\
+			(0x1 << HPIPE_G2_SET_2_G2_TX_EMPH0_EN_OFFSET)
+#define HPIPE_G2_TX_SSC_AMP_OFFSET		9
+#define HPIPE_G2_TX_SSC_AMP_MASK		\
+			(0x7f << HPIPE_G2_TX_SSC_AMP_OFFSET)
+
+#define HPIPE_G3_SET_2_REG			0xfc
+#define HPIPE_G3_SET_2_G3_TX_EMPH0_OFFSET	0
+#define HPIPE_G3_SET_2_G3_TX_EMPH0_MASK		\
+			(0xf << HPIPE_G3_SET_2_G3_TX_EMPH0_OFFSET)
+#define HPIPE_G3_SET_2_G3_TX_EMPH0_EN_OFFSET	4
+#define HPIPE_G3_SET_2_G3_TX_EMPH0_EN_MASK	\
+			(0x1 << HPIPE_G3_SET_2_G3_TX_EMPH0_EN_OFFSET)
+#define HPIPE_G3_TX_SSC_AMP_OFFSET		9
+#define HPIPE_G3_TX_SSC_AMP_MASK		\
+			(0x7f << HPIPE_G3_TX_SSC_AMP_OFFSET)
+
+#define HPIPE_VDD_CAL_0_REG			0x108
+#define HPIPE_CAL_VDD_CONT_MODE_OFFSET		15
+#define HPIPE_CAL_VDD_CONT_MODE_MASK		\
+			(0x1 << HPIPE_CAL_VDD_CONT_MODE_OFFSET)
+
+#define HPIPE_VDD_CAL_CTRL_REG			0x114
+#define HPIPE_EXT_SELLV_RXSAMPL_OFFSET		5
+#define HPIPE_EXT_SELLV_RXSAMPL_MASK		\
+			(0x1f << HPIPE_EXT_SELLV_RXSAMPL_OFFSET)
+
+#define HPIPE_PCIE_REG0				0x120
+#define HPIPE_PCIE_IDLE_SYNC_OFFSET		12
+#define HPIPE_PCIE_IDLE_SYNC_MASK		\
+			(0x1 << HPIPE_PCIE_IDLE_SYNC_OFFSET)
+#define HPIPE_PCIE_SEL_BITS_OFFSET		13
+#define HPIPE_PCIE_SEL_BITS_MASK		\
+			(0x3 << HPIPE_PCIE_SEL_BITS_OFFSET)
+
+#define HPIPE_LANE_ALIGN_REG			0x124
+#define HPIPE_LANE_ALIGN_OFF_OFFSET		12
+#define HPIPE_LANE_ALIGN_OFF_MASK		\
+			(0x1 << HPIPE_LANE_ALIGN_OFF_OFFSET)
+
+#define HPIPE_MISC_REG				0x13C
+#define HPIPE_MISC_CLK100M_125M_OFFSET		4
+#define HPIPE_MISC_CLK100M_125M_MASK		\
+			(0x1 << HPIPE_MISC_CLK100M_125M_OFFSET)
+#define HPIPE_MISC_ICP_FORCE_OFFSET		5
+#define HPIPE_MISC_ICP_FORCE_MASK		\
+			(0x1 << HPIPE_MISC_ICP_FORCE_OFFSET)
+#define HPIPE_MISC_TXDCLK_2X_OFFSET		6
+#define HPIPE_MISC_TXDCLK_2X_MASK		\
+			(0x1 << HPIPE_MISC_TXDCLK_2X_OFFSET)
+#define HPIPE_MISC_CLK500_EN_OFFSET		7
+#define HPIPE_MISC_CLK500_EN_MASK		\
+			(0x1 << HPIPE_MISC_CLK500_EN_OFFSET)
+#define HPIPE_MISC_REFCLK_SEL_OFFSET		10
+#define HPIPE_MISC_REFCLK_SEL_MASK		\
+			(0x1 << HPIPE_MISC_REFCLK_SEL_OFFSET)
+
+#define HPIPE_RX_CONTROL_1_REG			0x140
+#define HPIPE_RX_CONTROL_1_RXCLK2X_SEL_OFFSET	11
+#define HPIPE_RX_CONTROL_1_RXCLK2X_SEL_MASK	\
+			(0x1 << HPIPE_RX_CONTROL_1_RXCLK2X_SEL_OFFSET)
+#define HPIPE_RX_CONTROL_1_CLK8T_EN_OFFSET	12
+#define HPIPE_RX_CONTROL_1_CLK8T_EN_MASK	\
+			(0x1 << HPIPE_RX_CONTROL_1_CLK8T_EN_OFFSET)
+
+#define HPIPE_PWR_CTR_REG			0x148
+#define HPIPE_PWR_CTR_RST_DFE_OFFSET		0
+#define HPIPE_PWR_CTR_RST_DFE_MASK		\
+			(0x1 << HPIPE_PWR_CTR_RST_DFE_OFFSET)
+#define HPIPE_PWR_CTR_SFT_RST_OFFSET		10
+#define HPIPE_PWR_CTR_SFT_RST_MASK		\
+			(0x1 << HPIPE_PWR_CTR_SFT_RST_OFFSET)
+
+#define HPIPE_SPD_DIV_FORCE_REG				0x154
+#define HPIPE_TXDIGCK_DIV_FORCE_OFFSET			7
+#define HPIPE_TXDIGCK_DIV_FORCE_MASK			\
+			(0x1 << HPIPE_TXDIGCK_DIV_FORCE_OFFSET)
+#define HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_OFFSET		8
+#define HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_MASK		\
+			(0x3 << HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_OFFSET)
+#define HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_FORCE_OFFSET	10
+#define HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_FORCE_MASK	\
+			(0x1 << HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_FORCE_OFFSET)
+#define HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_OFFSET		13
+#define HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_MASK		\
+			(0x3 << HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_OFFSET)
+#define HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_FORCE_OFFSET	15
+#define HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_FORCE_MASK	\
+			(0x1 << HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_FORCE_OFFSET)
+
+/* HPIPE_RX_CLK_ALIGN90_AND_TX_IDLE_CALIBRATION_CTRL_REG */
+#define HPIPE_RX_CLK_ALIGN90_AND_TX_IDLE_CALIB_CTRL_REG	0x168
+#define HPIPE_CAL_RXCLKALIGN_90_EXT_EN_OFFSET		15
+#define HPIPE_CAL_RXCLKALIGN_90_EXT_EN_MASK		\
+			(0x1 << HPIPE_CAL_RXCLKALIGN_90_EXT_EN_OFFSET)
+#define HPIPE_CAL_OS_PH_EXT_OFFSET			8
+#define HPIPE_CAL_OS_PH_EXT_MASK			\
+			(0x7f << HPIPE_CAL_OS_PH_EXT_OFFSET)
+
+#define HPIPE_SAMPLER_N_PROC_CALIB_CTRL_REG	0x16C
+#define HPIPE_RX_SAMPLER_OS_GAIN_OFFSET		6
+#define HPIPE_RX_SAMPLER_OS_GAIN_MASK		\
+			(0x3 << HPIPE_RX_SAMPLER_OS_GAIN_OFFSET)
+#define HPIPE_SMAPLER_OFFSET			12
+#define HPIPE_SMAPLER_MASK			\
+			(0x1 << HPIPE_SMAPLER_OFFSET)
+
+#define HPIPE_TX_REG1_REG			0x174
+#define HPIPE_TX_REG1_TX_EMPH_RES_OFFSET	5
+#define HPIPE_TX_REG1_TX_EMPH_RES_MASK		\
+			(0x3 << HPIPE_TX_REG1_TX_EMPH_RES_OFFSET)
+#define HPIPE_TX_REG1_SLC_EN_OFFSET		10
+#define HPIPE_TX_REG1_SLC_EN_MASK		\
+			(0x3f << HPIPE_TX_REG1_SLC_EN_OFFSET)
+
+#define HPIPE_PWR_CTR_DTL_REG				0x184
+#define HPIPE_PWR_CTR_DTL_SQ_DET_EN_OFFSET		0
+#define HPIPE_PWR_CTR_DTL_SQ_DET_EN_MASK		\
+			(0x1 << HPIPE_PWR_CTR_DTL_SQ_DET_EN_OFFSET)
+#define HPIPE_PWR_CTR_DTL_SQ_PLOOP_EN_OFFSET		1
+#define HPIPE_PWR_CTR_DTL_SQ_PLOOP_EN_MASK		\
+			(0x1 << HPIPE_PWR_CTR_DTL_SQ_PLOOP_EN_OFFSET)
+#define HPIPE_PWR_CTR_DTL_FLOOP_EN_OFFSET		2
+#define HPIPE_PWR_CTR_DTL_FLOOP_EN_MASK			\
+			(0x1 << HPIPE_PWR_CTR_DTL_FLOOP_EN_OFFSET)
+#define HPIPE_PWR_CTR_DTL_CLAMPING_SEL_OFFSET		4
+#define HPIPE_PWR_CTR_DTL_CLAMPING_SEL_MASK		\
+			(0x7 << HPIPE_PWR_CTR_DTL_CLAMPING_SEL_OFFSET)
+#define HPIPE_PWR_CTR_DTL_INTPCLK_DIV_FORCE_OFFSET	10
+#define HPIPE_PWR_CTR_DTL_INTPCLK_DIV_FORCE_MASK	\
+			(0x1 << HPIPE_PWR_CTR_DTL_INTPCLK_DIV_FORCE_OFFSET)
+#define HPIPE_PWR_CTR_DTL_CLK_MODE_OFFSET		12
+#define HPIPE_PWR_CTR_DTL_CLK_MODE_MASK			\
+			(0x3 << HPIPE_PWR_CTR_DTL_CLK_MODE_OFFSET)
+#define HPIPE_PWR_CTR_DTL_CLK_MODE_FORCE_OFFSET		14
+#define HPIPE_PWR_CTR_DTL_CLK_MODE_FORCE_MASK		\
+			(1 << HPIPE_PWR_CTR_DTL_CLK_MODE_FORCE_OFFSET)
+
+#define HPIPE_PHASE_CONTROL_REG			0x188
+#define HPIPE_OS_PH_OFFSET_OFFSET		0
+#define HPIPE_OS_PH_OFFSET_MASK			\
+			(0x7f << HPIPE_OS_PH_OFFSET_OFFSET)
+#define HPIPE_OS_PH_OFFSET_FORCE_OFFSET		7
+#define HPIPE_OS_PH_OFFSET_FORCE_MASK		\
+			(0x1 << HPIPE_OS_PH_OFFSET_FORCE_OFFSET)
+#define HPIPE_OS_PH_VALID_OFFSET		8
+#define HPIPE_OS_PH_VALID_MASK			\
+			(0x1 << HPIPE_OS_PH_VALID_OFFSET)
+
+#define HPIPE_DATA_PHASE_OFF_CTRL_REG			0x1A0
+#define HPIPE_DATA_PHASE_ADAPTED_OS_PH_OFFSET		9
+#define HPIPE_DATA_PHASE_ADAPTED_OS_PH_MASK		\
+			(0x7f << HPIPE_DATA_PHASE_ADAPTED_OS_PH_OFFSET)
+
+#define HPIPE_ADAPTED_FFE_CAPACITOR_COUNTER_CTRL_REG	0x1A4
+#define HPIPE_ADAPTED_FFE_ADAPTED_FFE_RES_OFFSET	12
+#define HPIPE_ADAPTED_FFE_ADAPTED_FFE_RES_MASK		\
+			(0x3 << HPIPE_ADAPTED_FFE_ADAPTED_FFE_RES_OFFSET)
+#define HPIPE_ADAPTED_FFE_ADAPTED_FFE_CAP_OFFSET	8
+#define HPIPE_ADAPTED_FFE_ADAPTED_FFE_CAP_MASK		\
+			(0xf << HPIPE_ADAPTED_FFE_ADAPTED_FFE_CAP_OFFSET)
+
+#define HPIPE_SQ_GLITCH_FILTER_CTRL		0x1c8
+#define HPIPE_SQ_DEGLITCH_WIDTH_P_OFFSET	0
+#define HPIPE_SQ_DEGLITCH_WIDTH_P_MASK		\
+			(0xf << HPIPE_SQ_DEGLITCH_WIDTH_P_OFFSET)
+#define HPIPE_SQ_DEGLITCH_WIDTH_N_OFFSET	4
+#define HPIPE_SQ_DEGLITCH_WIDTH_N_MASK		\
+			(0xf << HPIPE_SQ_DEGLITCH_WIDTH_N_OFFSET)
+#define HPIPE_SQ_DEGLITCH_EN_OFFSET		8
+#define HPIPE_SQ_DEGLITCH_EN_MASK		\
+			(0x1 << HPIPE_SQ_DEGLITCH_EN_OFFSET)
+
+#define HPIPE_FRAME_DETECT_CTRL_0_REG		0x214
+#define HPIPE_TRAIN_PAT_NUM_OFFSET		0x7
+#define HPIPE_TRAIN_PAT_NUM_MASK		\
+			(0x1FF << HPIPE_TRAIN_PAT_NUM_OFFSET)
+
+#define HPIPE_FRAME_DETECT_CTRL_3_REG			0x220
+#define HPIPE_PATTERN_LOCK_LOST_TIMEOUT_EN_OFFSET	12
+#define HPIPE_PATTERN_LOCK_LOST_TIMEOUT_EN_MASK		\
+			(0x1 << HPIPE_PATTERN_LOCK_LOST_TIMEOUT_EN_OFFSET)
+
+#define HPIPE_DME_REG				0x228
+#define HPIPE_DME_ETHERNET_MODE_OFFSET		7
+#define HPIPE_DME_ETHERNET_MODE_MASK		\
+			(0x1 << HPIPE_DME_ETHERNET_MODE_OFFSET)
+
+#define HPIPE_TRX_TRAIN_CTRL_0_REG		0x22c
+#define HPIPE_TRX_TX_F0T_EO_BASED_OFFSET	14
+#define HPIPE_TRX_TX_F0T_EO_BASED_MASK		\
+			(1 << HPIPE_TRX_TX_F0T_EO_BASED_OFFSET)
+#define HPIPE_TRX_UPDATE_THEN_HOLD_OFFSET	6
+#define HPIPE_TRX_UPDATE_THEN_HOLD_MASK		\
+			(1 << HPIPE_TRX_UPDATE_THEN_HOLD_OFFSET)
+#define HPIPE_TRX_TX_CTRL_CLK_EN_OFFSET		5
+#define HPIPE_TRX_TX_CTRL_CLK_EN_MASK		\
+			(1 << HPIPE_TRX_TX_CTRL_CLK_EN_OFFSET)
+#define HPIPE_TRX_RX_ANA_IF_CLK_ENE_OFFSET	4
+#define HPIPE_TRX_RX_ANA_IF_CLK_ENE_MASK	\
+			(1 << HPIPE_TRX_RX_ANA_IF_CLK_ENE_OFFSET)
+#define HPIPE_TRX_TX_TRAIN_EN_OFFSET		1
+#define HPIPE_TRX_TX_TRAIN_EN_MASK		\
+			(1 << HPIPE_TRX_TX_TRAIN_EN_OFFSET)
+#define HPIPE_TRX_RX_TRAIN_EN_OFFSET		0
+#define HPIPE_TRX_RX_TRAIN_EN_MASK		\
+			(1 << HPIPE_TRX_RX_TRAIN_EN_OFFSET)
+
+#define HPIPE_TX_TRAIN_CTRL_0_REG		0x268
+#define HPIPE_TX_TRAIN_P2P_HOLD_OFFSET		15
+#define HPIPE_TX_TRAIN_P2P_HOLD_MASK		\
+			(0x1 << HPIPE_TX_TRAIN_P2P_HOLD_OFFSET)
+
+#define HPIPE_TX_TRAIN_CTRL_REG			0x26C
+#define HPIPE_TX_TRAIN_CTRL_G1_OFFSET		0
+#define HPIPE_TX_TRAIN_CTRL_G1_MASK		\
+			(0x1 << HPIPE_TX_TRAIN_CTRL_G1_OFFSET)
+#define HPIPE_TX_TRAIN_CTRL_GN1_OFFSET		1
+#define HPIPE_TX_TRAIN_CTRL_GN1_MASK		\
+			(0x1 << HPIPE_TX_TRAIN_CTRL_GN1_OFFSET)
+#define HPIPE_TX_TRAIN_CTRL_G0_OFFSET		2
+#define HPIPE_TX_TRAIN_CTRL_G0_MASK		\
+			(0x1 << HPIPE_TX_TRAIN_CTRL_G0_OFFSET)
+
+#define HPIPE_TX_TRAIN_CTRL_4_REG		0x278
+#define HPIPE_TRX_TRAIN_TIMER_OFFSET		0
+#define HPIPE_TRX_TRAIN_TIMER_MASK		\
+			(0x3FF << HPIPE_TRX_TRAIN_TIMER_OFFSET)
+
+#define HPIPE_TX_TRAIN_CTRL_5_REG		0x2A4
+#define HPIPE_RX_TRAIN_TIMER_OFFSET		0
+#define HPIPE_RX_TRAIN_TIMER_MASK		\
+			(0x3ff << HPIPE_RX_TRAIN_TIMER_OFFSET)
+#define HPIPE_TX_TRAIN_START_SQ_EN_OFFSET	11
+#define HPIPE_TX_TRAIN_START_SQ_EN_MASK		\
+			(0x1 << HPIPE_TX_TRAIN_START_SQ_EN_OFFSET)
+#define HPIPE_TX_TRAIN_START_FRM_DET_EN_OFFSET	12
+#define HPIPE_TX_TRAIN_START_FRM_DET_EN_MASK	\
+			(0x1 << HPIPE_TX_TRAIN_START_FRM_DET_EN_OFFSET)
+#define HPIPE_TX_TRAIN_START_FRM_LOCK_EN_OFFSET	13
+#define HPIPE_TX_TRAIN_START_FRM_LOCK_EN_MASK	\
+			(0x1 << HPIPE_TX_TRAIN_START_FRM_LOCK_EN_OFFSET)
+#define HPIPE_TX_TRAIN_WAIT_TIME_EN_OFFSET	14
+#define HPIPE_TX_TRAIN_WAIT_TIME_EN_MASK	\
+			(0x1 << HPIPE_TX_TRAIN_WAIT_TIME_EN_OFFSET)
+
+#define HPIPE_INTERRUPT_1_REGISTER		0x2AC
+#define HPIPE_TRX_TRAIN_FAILED_OFFSET		6
+#define HPIPE_TRX_TRAIN_FAILED_MASK		\
+			(1 << HPIPE_TRX_TRAIN_FAILED_OFFSET)
+#define HPIPE_TRX_TRAIN_TIME_OUT_INT_OFFSET	5
+#define HPIPE_TRX_TRAIN_TIME_OUT_INT_MASK	\
+			(1 << HPIPE_TRX_TRAIN_TIME_OUT_INT_OFFSET)
+#define HPIPE_INTERRUPT_TRX_TRAIN_DONE_OFFSET	4
+#define HPIPE_INTERRUPT_TRX_TRAIN_DONE_MASK	\
+			(1 << HPIPE_INTERRUPT_TRX_TRAIN_DONE_OFFSET)
+#define HPIPE_INTERRUPT_DFE_DONE_INT_OFFSET	3
+#define HPIPE_INTERRUPT_DFE_DONE_INT_MASK	\
+			(1 << HPIPE_INTERRUPT_DFE_DONE_INT_OFFSET)
+#define HPIPE_INTERRUPT_RX_TRAIN_COMPLETE_INT_OFFSET	1
+#define HPIPE_INTERRUPT_RX_TRAIN_COMPLETE_INT_MASK	\
+			(1 << HPIPE_INTERRUPT_RX_TRAIN_COMPLETE_INT_OFFSET)
+
+#define HPIPE_TX_TRAIN_REG			0x31C
+#define HPIPE_TX_TRAIN_CHK_INIT_OFFSET		4
+#define HPIPE_TX_TRAIN_CHK_INIT_MASK		\
+			(0x1 << HPIPE_TX_TRAIN_CHK_INIT_OFFSET)
+#define HPIPE_TX_TRAIN_COE_FM_PIN_PCIE3_OFFSET	7
+#define HPIPE_TX_TRAIN_COE_FM_PIN_PCIE3_MASK	\
+			(0x1 << HPIPE_TX_TRAIN_COE_FM_PIN_PCIE3_OFFSET)
+#define HPIPE_TX_TRAIN_16BIT_AUTO_EN_OFFSET	8
+#define HPIPE_TX_TRAIN_16BIT_AUTO_EN_MASK	\
+			(0x1 << HPIPE_TX_TRAIN_16BIT_AUTO_EN_OFFSET)
+#define HPIPE_TX_TRAIN_PAT_SEL_OFFSET		9
+#define HPIPE_TX_TRAIN_PAT_SEL_MASK		\
+			(0x1 << HPIPE_TX_TRAIN_PAT_SEL_OFFSET)
+
+#define HPIPE_SAVED_DFE_VALUES_REG		0x328
+#define HPIPE_SAVED_DFE_VALUES_SAV_F0D_OFFSET	10
+#define HPIPE_SAVED_DFE_VALUES_SAV_F0D_MASK	\
+			(0x3f << HPIPE_SAVED_DFE_VALUES_SAV_F0D_OFFSET)
+
+#define HPIPE_CDR_CONTROL_REG			0x418
+#define HPIPE_CRD_MIDPOINT_PHASE_OS_OFFSET	0
+#define HPIPE_CRD_MIDPOINT_PHASE_OS_MASK	\
+			(0x3f << HPIPE_CRD_MIDPOINT_PHASE_OS_OFFSET)
+#define HPIPE_CDR_MAX_DFE_ADAPT_1_OFFSET	6
+#define HPIPE_CDR_MAX_DFE_ADAPT_1_MASK		\
+			(0x7 << HPIPE_CDR_MAX_DFE_ADAPT_1_OFFSET)
+#define HPIPE_CDR_MAX_DFE_ADAPT_0_OFFSET	9
+#define HPIPE_CDR_MAX_DFE_ADAPT_0_MASK		\
+			(0x7 << HPIPE_CDR_MAX_DFE_ADAPT_0_OFFSET)
+#define HPIPE_CDR_RX_MAX_DFE_ADAPT_1_OFFSET	12
+#define HPIPE_CDR_RX_MAX_DFE_ADAPT_1_MASK	\
+			(0x3 << HPIPE_CDR_RX_MAX_DFE_ADAPT_1_OFFSET)
+#define HPIPE_CDR_RX_MAX_DFE_ADAPT_0_OFFSET	14
+#define HPIPE_CDR_RX_MAX_DFE_ADAPT_0_MASK	\
+			(0x3 << HPIPE_CDR_RX_MAX_DFE_ADAPT_0_OFFSET)
+
+
+#define HPIPE_CDR_CONTROL1_REG			0x41c
+#define HPIPE_CRD2_CRD_MIDPOINT_SMALL_THRES_K_OFF	12
+#define HPIPE_CRD2_CRD_MIDPOINT_SMALL_THRES_K_MASK	\
+			(0xf << HPIPE_CRD2_CRD_MIDPOINT_SMALL_THRES_K_OFF)
+
+#define HPIPE_CDR_CONTROL2_REG			0x420
+#define HPIPE_CRD2_CRD_MIDPOINT_LARGE_THRES_K_OFF	12
+#define HPIPE_CRD2_CRD_MIDPOINT_LARGE_THRES_K_MASK	\
+			(0xf << HPIPE_CRD2_CRD_MIDPOINT_LARGE_THRES_K_OFF)
+
+#define HPIPE_TX_TRAIN_CTRL_11_REG		0x438
+#define HPIPE_TX_STATUS_CHECK_MODE_OFFSET	6
+#define HPIPE_TX_TX_STATUS_CHECK_MODE_MASK	\
+			(0x1 << HPIPE_TX_STATUS_CHECK_MODE_OFFSET)
+#define HPIPE_TX_NUM_OF_PRESET_OFFSET		10
+#define HPIPE_TX_NUM_OF_PRESET_MASK		\
+			(0x7 << HPIPE_TX_NUM_OF_PRESET_OFFSET)
+#define HPIPE_TX_SWEEP_PRESET_EN_OFFSET		15
+#define HPIPE_TX_SWEEP_PRESET_EN_MASK		\
+			(0x1 << HPIPE_TX_SWEEP_PRESET_EN_OFFSET)
+
+#define HPIPE_G1_SETTINGS_3_REG				0x440
+#define HPIPE_G1_SETTINGS_3_G1_FFE_CAP_SEL_OFFSET	0
+#define HPIPE_G1_SETTINGS_3_G1_FFE_CAP_SEL_MASK		\
+			(0xf << HPIPE_G1_SETTINGS_3_G1_FFE_CAP_SEL_OFFSET)
+#define HPIPE_G1_SETTINGS_3_G1_FFE_RES_SEL_OFFSET	4
+#define HPIPE_G1_SETTINGS_3_G1_FFE_RES_SEL_MASK		\
+			(0x7 << HPIPE_G1_SETTINGS_3_G1_FFE_RES_SEL_OFFSET)
+#define HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_OFFSET	7
+#define HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_MASK	\
+			(0x1 << HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_OFFSET)
+#define HPIPE_G1_SETTINGS_3_G1_FBCK_SEL_OFFSET		9
+#define HPIPE_G1_SETTINGS_3_G1_FBCK_SEL_MASK		\
+			(0x1 << HPIPE_G1_SETTINGS_3_G1_FBCK_SEL_OFFSET)
+#define HPIPE_G1_SETTINGS_3_G1_FFE_DEG_RES_LEVEL_OFFSET	12
+#define HPIPE_G1_SETTINGS_3_G1_FFE_DEG_RES_LEVEL_MASK	\
+			(0x3 << HPIPE_G1_SETTINGS_3_G1_FFE_DEG_RES_LEVEL_OFFSET)
+#define HPIPE_G1_SETTINGS_3_G1_FFE_LOAD_RES_LEVEL_OFFSET	14
+#define HPIPE_G1_SETTINGS_3_G1_FFE_LOAD_RES_LEVEL_MASK	\
+		(0x3 << HPIPE_G1_SETTINGS_3_G1_FFE_LOAD_RES_LEVEL_OFFSET)
+
+#define HPIPE_G1_SETTINGS_4_REG			0x444
+#define HPIPE_G1_SETTINGS_4_G1_DFE_RES_OFFSET	8
+#define HPIPE_G1_SETTINGS_4_G1_DFE_RES_MASK	\
+			(0x3 << HPIPE_G1_SETTINGS_4_G1_DFE_RES_OFFSET)
+
+#define HPIPE_G2_SETTINGS_4_REG			0x44c
+#define HPIPE_G2_DFE_RES_OFFSET			8
+#define HPIPE_G2_DFE_RES_MASK			\
+			(0x3 << HPIPE_G2_DFE_RES_OFFSET)
+
+#define HPIPE_G3_SETTING_3_REG			0x450
+#define HPIPE_G3_FFE_CAP_SEL_OFFSET		0
+#define HPIPE_G3_FFE_CAP_SEL_MASK		\
+			(0xf << HPIPE_G3_FFE_CAP_SEL_OFFSET)
+#define HPIPE_G3_FFE_RES_SEL_OFFSET		4
+#define HPIPE_G3_FFE_RES_SEL_MASK		\
+			(0x7 << HPIPE_G3_FFE_RES_SEL_OFFSET)
+#define HPIPE_G3_FFE_SETTING_FORCE_OFFSET	7
+#define HPIPE_G3_FFE_SETTING_FORCE_MASK		\
+			(0x1 << HPIPE_G3_FFE_SETTING_FORCE_OFFSET)
+#define HPIPE_G3_FFE_DEG_RES_LEVEL_OFFSET	12
+#define HPIPE_G3_FFE_DEG_RES_LEVEL_MASK		\
+			(0x3 << HPIPE_G3_FFE_DEG_RES_LEVEL_OFFSET)
+#define HPIPE_G3_FFE_LOAD_RES_LEVEL_OFFSET	14
+#define HPIPE_G3_FFE_LOAD_RES_LEVEL_MASK	\
+			(0x3 << HPIPE_G3_FFE_LOAD_RES_LEVEL_OFFSET)
+
+#define HPIPE_G3_SETTING_4_REG			0x454
+#define HPIPE_G3_DFE_RES_OFFSET			8
+#define HPIPE_G3_DFE_RES_MASK			(0x3 << HPIPE_G3_DFE_RES_OFFSET)
+
+#define HPIPE_TX_PRESET_INDEX_REG		0x468
+#define HPIPE_TX_PRESET_INDEX_OFFSET		0
+#define HPIPE_TX_PRESET_INDEX_MASK		\
+			(0xf << HPIPE_TX_PRESET_INDEX_OFFSET)
+
+#define HPIPE_DFE_CONTROL_REG			0x470
+#define HPIPE_DFE_TX_MAX_DFE_ADAPT_OFFSET	14
+#define HPIPE_DFE_TX_MAX_DFE_ADAPT_MASK		\
+			(0x3 << HPIPE_DFE_TX_MAX_DFE_ADAPT_OFFSET)
+
+#define HPIPE_DFE_CTRL_28_REG			0x49C
+#define HPIPE_DFE_CTRL_28_PIPE4_OFFSET		7
+#define HPIPE_DFE_CTRL_28_PIPE4_MASK		\
+			(0x1 << HPIPE_DFE_CTRL_28_PIPE4_OFFSET)
+
+#define HPIPE_TRX0_REG				0x4cc /*in doc 0x133*4*/
+#define HPIPE_TRX0_GAIN_TRAIN_WITH_SAMPLER_OFF	2
+#define HPIPE_TRX0_GAIN_TRAIN_WITH_SAMPLER_MASK \
+			(0x1 << HPIPE_TRX0_GAIN_TRAIN_WITH_SAMPLER_OFF)
+#define HPIPE_TRX0_GAIN_TRAIN_WITH_C_OFF	0
+#define HPIPE_TRX0_GAIN_TRAIN_WITH_C_MASK	\
+			(0x1 << HPIPE_TRX0_GAIN_TRAIN_WITH_C_OFF)
+
+#define HPIPE_TRX_REG1				0x4d0 /*in doc 0x134*4*/
+#define HPIPE_TRX_REG1_MIN_BOOST_MODE_OFF	3
+#define HPIPE_TRX_REG1_MIN_BOOST_MODE_MASK	\
+			(0x1 << HPIPE_TRX_REG1_MIN_BOOST_MODE_OFF)
+#define HPIPE_TRX_REG1_SUMFTAP_EN_OFF		10
+#define HPIPE_TRX_REG1_SUMFTAP_EN_MASK		\
+			(0x3f << HPIPE_TRX_REG1_SUMFTAP_EN_OFF)
+
+#define HPIPE_TRX_REG2				0x4d8 /*in doc 0x136*4*/
+#define HPIPE_TRX_REG2_SUMF_BOOST_TARGET_C_OFF	11
+#define HPIPE_TRX_REG2_SUMF_BOOST_TARGET_C_MASK	\
+			(0x1f << HPIPE_TRX_REG2_SUMF_BOOST_TARGET_C_OFF)
+#define HPIPE_TRX_REG2_SUMF_BOOST_TARGET_K_OFF	7
+#define HPIPE_TRX_REG2_SUMF_BOOST_TARGET_K_MASK	\
+			(0xf << HPIPE_TRX_REG2_SUMF_BOOST_TARGET_K_OFF)
+
+#define HPIPE_G1_SETTING_5_REG			0x538
+#define HPIPE_G1_SETTING_5_G1_ICP_OFFSET	0
+#define HPIPE_G1_SETTING_5_G1_ICP_MASK		\
+			(0xf << HPIPE_G1_SETTING_5_G1_ICP_OFFSET)
+
+#define HPIPE_G3_SETTING_5_REG			0x548
+#define HPIPE_G3_SETTING_5_G3_ICP_OFFSET	0
+#define HPIPE_G3_SETTING_5_G3_ICP_MASK		\
+			(0xf << HPIPE_G3_SETTING_5_G3_ICP_OFFSET)
+
+#define HPIPE_LANE_CONFIG0_REG			0x600
+#define HPIPE_LANE_CONFIG0_TXDEEMPH0_OFFSET	0
+#define HPIPE_LANE_CONFIG0_TXDEEMPH0_MASK	\
+			(0x1 << HPIPE_LANE_CONFIG0_TXDEEMPH0_OFFSET)
+
+#define HPIPE_LANE_STATUS1_REG			0x60C
+#define HPIPE_LANE_STATUS1_PCLK_EN_OFFSET	0
+#define HPIPE_LANE_STATUS1_PCLK_EN_MASK		\
+			(0x1 << HPIPE_LANE_STATUS1_PCLK_EN_OFFSET)
+
+#define HPIPE_LANE_CFG4_REG			0x620
+#define HPIPE_LANE_CFG4_DFE_CTRL_OFFSET		0
+#define HPIPE_LANE_CFG4_DFE_CTRL_MASK		\
+			(0x7 << HPIPE_LANE_CFG4_DFE_CTRL_OFFSET)
+#define HPIPE_LANE_CFG4_DFE_EN_SEL_OFFSET	3
+#define HPIPE_LANE_CFG4_DFE_EN_SEL_MASK		\
+			(0x1 << HPIPE_LANE_CFG4_DFE_EN_SEL_OFFSET)
+#define HPIPE_LANE_CFG4_DFE_OVER_OFFSET		6
+#define HPIPE_LANE_CFG4_DFE_OVER_MASK		\
+			(0x1 << HPIPE_LANE_CFG4_DFE_OVER_OFFSET)
+#define HPIPE_LANE_CFG4_SSC_CTRL_OFFSET		7
+#define HPIPE_LANE_CFG4_SSC_CTRL_MASK		\
+			(0x1 << HPIPE_LANE_CFG4_SSC_CTRL_OFFSET)
+
+#define HPIPE_LANE_EQ_REMOTE_SETTING_REG	0x6f8
+#define HPIPE_LANE_CFG_FOM_DIRN_OVERRIDE_OFFSET	0
+#define HPIPE_LANE_CFG_FOM_DIRN_OVERRIDE_MASK	\
+			(0x1 << HPIPE_LANE_CFG_FOM_DIRN_OVERRIDE_OFFSET)
+#define HPIPE_LANE_CFG_FOM_ONLY_MODE_OFFFSET	1
+#define HPIPE_LANE_CFG_FOM_ONLY_MODE_MASK	\
+			(0x1 << HPIPE_LANE_CFG_FOM_ONLY_MODE_OFFFSET)
+#define HPIPE_LANE_CFG_FOM_PRESET_VECTOR_OFFSET	2
+#define HPIPE_LANE_CFG_FOM_PRESET_VECTOR_MASK	\
+			(0xf << HPIPE_LANE_CFG_FOM_PRESET_VECTOR_OFFSET)
+
+#define HPIPE_LANE_EQU_CONFIG_0_REG		0x69C
+#define HPIPE_CFG_PHY_RC_EP_OFFSET		12
+#define HPIPE_CFG_PHY_RC_EP_MASK		\
+			(0x1 << HPIPE_CFG_PHY_RC_EP_OFFSET)
+
+#define HPIPE_LANE_EQ_CFG1_REG			0x6a0
+#define HPIPE_CFG_UPDATE_POLARITY_OFFSET	12
+#define HPIPE_CFG_UPDATE_POLARITY_MASK		\
+			(0x1 << HPIPE_CFG_UPDATE_POLARITY_OFFSET)
+
+#define HPIPE_LANE_EQ_CFG2_REG			0x6a4
+#define HPIPE_CFG_EQ_BUNDLE_DIS_OFFSET		14
+#define HPIPE_CFG_EQ_BUNDLE_DIS_MASK		\
+			(0x1 << HPIPE_CFG_EQ_BUNDLE_DIS_OFFSET)
+
+#define HPIPE_RST_CLK_CTRL_REG			0x704
+#define HPIPE_RST_CLK_CTRL_PIPE_RST_OFFSET	0
+#define HPIPE_RST_CLK_CTRL_PIPE_RST_MASK	\
+			(0x1 << HPIPE_RST_CLK_CTRL_PIPE_RST_OFFSET)
+#define HPIPE_RST_CLK_CTRL_FIXED_PCLK_OFFSET	2
+#define HPIPE_RST_CLK_CTRL_FIXED_PCLK_MASK	\
+			(0x1 << HPIPE_RST_CLK_CTRL_FIXED_PCLK_OFFSET)
+#define HPIPE_RST_CLK_CTRL_PIPE_WIDTH_OFFSET	3
+#define HPIPE_RST_CLK_CTRL_PIPE_WIDTH_MASK	\
+			(0x1 << HPIPE_RST_CLK_CTRL_PIPE_WIDTH_OFFSET)
+#define HPIPE_RST_CLK_CTRL_CORE_FREQ_SEL_OFFSET	9
+#define HPIPE_RST_CLK_CTRL_CORE_FREQ_SEL_MASK	\
+			(0x1 << HPIPE_RST_CLK_CTRL_CORE_FREQ_SEL_OFFSET)
+
+#define HPIPE_TST_MODE_CTRL_REG			0x708
+#define HPIPE_TST_MODE_CTRL_MODE_MARGIN_OFFSET	2
+#define HPIPE_TST_MODE_CTRL_MODE_MARGIN_MASK	\
+			(0x1 << HPIPE_TST_MODE_CTRL_MODE_MARGIN_OFFSET)
+
+#define HPIPE_CLK_SRC_LO_REG				0x70c
+#define HPIPE_CLK_SRC_LO_BUNDLE_PERIOD_SEL_OFFSET	1
+#define HPIPE_CLK_SRC_LO_BUNDLE_PERIOD_SEL_MASK		\
+			(0x1 << HPIPE_CLK_SRC_LO_BUNDLE_PERIOD_SEL_OFFSET)
+#define HPIPE_CLK_SRC_LO_BUNDLE_PERIOD_SCALE_OFFSET	2
+#define HPIPE_CLK_SRC_LO_BUNDLE_PERIOD_SCALE_MASK	\
+			(0x3 << HPIPE_CLK_SRC_LO_BUNDLE_PERIOD_SCALE_OFFSET)
+#define HPIPE_CLK_SRC_LO_PLL_RDY_DL_OFFSET		5
+#define HPIPE_CLK_SRC_LO_PLL_RDY_DL_MASK		\
+			(0x7 << HPIPE_CLK_SRC_LO_PLL_RDY_DL_OFFSET)
+
+#define HPIPE_CLK_SRC_HI_REG			0x710
+#define HPIPE_CLK_SRC_HI_LANE_STRT_OFFSET	0
+#define HPIPE_CLK_SRC_HI_LANE_STRT_MASK		\
+			(0x1 << HPIPE_CLK_SRC_HI_LANE_STRT_OFFSET)
+#define HPIPE_CLK_SRC_HI_LANE_BREAK_OFFSET	1
+#define HPIPE_CLK_SRC_HI_LANE_BREAK_MASK	\
+			(0x1 << HPIPE_CLK_SRC_HI_LANE_BREAK_OFFSET)
+#define HPIPE_CLK_SRC_HI_LANE_MASTER_OFFSET	2
+#define HPIPE_CLK_SRC_HI_LANE_MASTER_MASK	\
+			(0x1 << HPIPE_CLK_SRC_HI_LANE_MASTER_OFFSET)
+#define HPIPE_CLK_SRC_HI_MODE_PIPE_OFFSET	7
+#define HPIPE_CLK_SRC_HI_MODE_PIPE_MASK		\
+			(0x1 << HPIPE_CLK_SRC_HI_MODE_PIPE_OFFSET)
+
+#define HPIPE_GLOBAL_MISC_CTRL			0x718
+#define HPIPE_GLOBAL_PM_CTRL			0x740
+#define HPIPE_GLOBAL_PM_RXDLOZ_WAIT_OFFSET	0
+#define HPIPE_GLOBAL_PM_RXDLOZ_WAIT_MASK	\
+			(0xFF << HPIPE_GLOBAL_PM_RXDLOZ_WAIT_OFFSET)
+
+/* General defines */
+#define PLL_LOCK_TIMEOUT			15000
+
+#endif /* COMPHY_CP110_H */
diff --git a/drivers/marvell/comphy/phy-comphy-3700.c b/drivers/marvell/comphy/phy-comphy-3700.c
new file mode 100644
index 0000000..1a97753
--- /dev/null
+++ b/drivers/marvell/comphy/phy-comphy-3700.c
@@ -0,0 +1,1065 @@
+/*
+ * Copyright (C) 2018-2021 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <errno.h>
+
+#include <common/debug.h>
+#include <drivers/delay_timer.h>
+#include <lib/mmio.h>
+#include <lib/spinlock.h>
+
+#include <mvebu.h>
+#include <mvebu_def.h>
+#include <plat_marvell.h>
+
+#include "phy-comphy-3700.h"
+#include "phy-comphy-common.h"
+
+/*
+ * COMPHY_INDIRECT_REG points to ahci address space but the ahci region used in
+ * Linux is up to 0x178 so none will access it from Linux in runtime
+ * concurrently.
+ */
+#define COMPHY_INDIRECT_REG	(MVEBU_REGS_BASE + 0xE0178)
+
+/* The USB3_GBE1_PHY range is above USB3 registers used in dts */
+#define USB3_GBE1_PHY		(MVEBU_REGS_BASE + 0x5C000)
+#define COMPHY_SD_ADDR		(MVEBU_REGS_BASE + 0x1F000)
+
+struct sgmii_phy_init_data_fix {
+	uint16_t addr;
+	uint16_t value;
+};
+
+/* Changes to 40M1G25 mode data required for running 40M3G125 init mode */
+static struct sgmii_phy_init_data_fix sgmii_phy_init_fix[] = {
+	{0x005, 0x07CC}, {0x015, 0x0000}, {0x01B, 0x0000}, {0x01D, 0x0000},
+	{0x01E, 0x0000}, {0x01F, 0x0000}, {0x020, 0x0000}, {0x021, 0x0030},
+	{0x026, 0x0888}, {0x04D, 0x0152}, {0x04F, 0xA020}, {0x050, 0x07CC},
+	{0x053, 0xE9CA}, {0x055, 0xBD97}, {0x071, 0x3015}, {0x076, 0x03AA},
+	{0x07C, 0x0FDF}, {0x0C2, 0x3030}, {0x0C3, 0x8000}, {0x0E2, 0x5550},
+	{0x0E3, 0x12A4}, {0x0E4, 0x7D00}, {0x0E6, 0x0C83}, {0x101, 0xFCC0},
+	{0x104, 0x0C10}
+};
+
+/* 40M1G25 mode init data */
+static uint16_t sgmii_phy_init[512] = {
+	/* 0       1       2       3       4       5       6       7 */
+	/*-----------------------------------------------------------*/
+	/* 8       9       A       B       C       D       E       F */
+	0x3110, 0xFD83, 0x6430, 0x412F, 0x82C0, 0x06FA, 0x4500, 0x6D26,	/* 00 */
+	0xAFC0, 0x8000, 0xC000, 0x0000, 0x2000, 0x49CC, 0x0BC9, 0x2A52,	/* 08 */
+	0x0BD2, 0x0CDE, 0x13D2, 0x0CE8, 0x1149, 0x10E0, 0x0000, 0x0000,	/* 10 */
+	0x0000, 0x0000, 0x0000, 0x0001, 0x0000, 0x4134, 0x0D2D, 0xFFFF,	/* 18 */
+	0xFFE0, 0x4030, 0x1016, 0x0030, 0x0000, 0x0800, 0x0866, 0x0000,	/* 20 */
+	0x0000, 0x0000, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF,	/* 28 */
+	0xFFFF, 0xFFFF, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/* 30 */
+	0x0000, 0x0000, 0x000F, 0x6A62, 0x1988, 0x3100, 0x3100, 0x3100,	/* 38 */
+	0x3100, 0xA708, 0x2430, 0x0830, 0x1030, 0x4610, 0xFF00, 0xFF00,	/* 40 */
+	0x0060, 0x1000, 0x0400, 0x0040, 0x00F0, 0x0155, 0x1100, 0xA02A,	/* 48 */
+	0x06FA, 0x0080, 0xB008, 0xE3ED, 0x5002, 0xB592, 0x7A80, 0x0001,	/* 50 */
+	0x020A, 0x8820, 0x6014, 0x8054, 0xACAA, 0xFC88, 0x2A02, 0x45CF,	/* 58 */
+	0x000F, 0x1817, 0x2860, 0x064F, 0x0000, 0x0204, 0x1800, 0x6000,	/* 60 */
+	0x810F, 0x4F23, 0x4000, 0x4498, 0x0850, 0x0000, 0x000E, 0x1002,	/* 68 */
+	0x9D3A, 0x3009, 0xD066, 0x0491, 0x0001, 0x6AB0, 0x0399, 0x3780,	/* 70 */
+	0x0040, 0x5AC0, 0x4A80, 0x0000, 0x01DF, 0x0000, 0x0007, 0x0000,	/* 78 */
+	0x2D54, 0x00A1, 0x4000, 0x0100, 0xA20A, 0x0000, 0x0000, 0x0000,	/* 80 */
+	0x0000, 0x0000, 0x0000, 0x7400, 0x0E81, 0x1000, 0x1242, 0x0210,	/* 88 */
+	0x80DF, 0x0F1F, 0x2F3F, 0x4F5F, 0x6F7F, 0x0F1F, 0x2F3F, 0x4F5F,	/* 90 */
+	0x6F7F, 0x4BAD, 0x0000, 0x0000, 0x0800, 0x0000, 0x2400, 0xB651,	/* 98 */
+	0xC9E0, 0x4247, 0x0A24, 0x0000, 0xAF19, 0x1004, 0x0000, 0x0000,	/* A0 */
+	0x0000, 0x0013, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/* A8 */
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/* B0 */
+	0x0000, 0x0000, 0x0000, 0x0060, 0x0000, 0x0000, 0x0000, 0x0000,	/* B8 */
+	0x0000, 0x0000, 0x3010, 0xFA00, 0x0000, 0x0000, 0x0000, 0x0003,	/* C0 */
+	0x1618, 0x8200, 0x8000, 0x0400, 0x050F, 0x0000, 0x0000, 0x0000,	/* C8 */
+	0x4C93, 0x0000, 0x1000, 0x1120, 0x0010, 0x1242, 0x1242, 0x1E00,	/* D0 */
+	0x0000, 0x0000, 0x0000, 0x00F8, 0x0000, 0x0041, 0x0800, 0x0000,	/* D8 */
+	0x82A0, 0x572E, 0x2490, 0x14A9, 0x4E00, 0x0000, 0x0803, 0x0541,	/* E0 */
+	0x0C15, 0x0000, 0x0000, 0x0400, 0x2626, 0x0000, 0x0000, 0x4200,	/* E8 */
+	0x0000, 0xAA55, 0x1020, 0x0000, 0x0000, 0x5010, 0x0000, 0x0000,	/* F0 */
+	0x0000, 0x0000, 0x5000, 0x0000, 0x0000, 0x0000, 0x02F2, 0x0000,	/* F8 */
+	0x101F, 0xFDC0, 0x4000, 0x8010, 0x0110, 0x0006, 0x0000, 0x0000,	/*100 */
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*108 */
+	0x04CF, 0x0000, 0x04CF, 0x0000, 0x04CF, 0x0000, 0x04C6, 0x0000,	/*110 */
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*118 */
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*120 */
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*128 */
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*130 */
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*138 */
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*140 */
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*148 */
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*150 */
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*158 */
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*160 */
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*168 */
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*170 */
+	0x0000, 0x0000, 0x0000, 0x00F0, 0x08A2, 0x3112, 0x0A14, 0x0000,	/*178 */
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*180 */
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*188 */
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*190 */
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*198 */
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*1A0 */
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*1A8 */
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*1B0 */
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*1B8 */
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*1C0 */
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*1C8 */
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*1D0 */
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*1D8 */
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*1E0 */
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*1E8 */
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,	/*1F0 */
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000	/*1F8 */
+};
+
+/* PHY selector configures with corresponding modes */
+static int mvebu_a3700_comphy_set_phy_selector(uint8_t comphy_index,
+						uint32_t comphy_mode)
+{
+	uint32_t reg;
+	int mode = COMPHY_GET_MODE(comphy_mode);
+
+	reg = mmio_read_32(MVEBU_COMPHY_REG_BASE + COMPHY_SELECTOR_PHY_REG);
+	switch (mode) {
+	case (COMPHY_SATA_MODE):
+		/* SATA must be in Lane2 */
+		if (comphy_index == COMPHY_LANE2)
+			reg &= ~COMPHY_SELECTOR_USB3_PHY_SEL_BIT;
+		else
+			goto error;
+		break;
+
+	case (COMPHY_SGMII_MODE):
+	case (COMPHY_2500BASEX_MODE):
+		if (comphy_index == COMPHY_LANE0)
+			reg &= ~COMPHY_SELECTOR_USB3_GBE1_SEL_BIT;
+		else if (comphy_index == COMPHY_LANE1)
+			reg &= ~COMPHY_SELECTOR_PCIE_GBE0_SEL_BIT;
+		else
+			goto error;
+		break;
+
+	case (COMPHY_USB3H_MODE):
+	case (COMPHY_USB3D_MODE):
+	case (COMPHY_USB3_MODE):
+		if (comphy_index == COMPHY_LANE2)
+			reg |= COMPHY_SELECTOR_USB3_PHY_SEL_BIT;
+		else if (comphy_index == COMPHY_LANE0)
+			reg |= COMPHY_SELECTOR_USB3_GBE1_SEL_BIT;
+		else
+			goto error;
+		break;
+
+	case (COMPHY_PCIE_MODE):
+		/* PCIE must be in Lane1 */
+		if (comphy_index == COMPHY_LANE1)
+			reg |= COMPHY_SELECTOR_PCIE_GBE0_SEL_BIT;
+		else
+			goto error;
+		break;
+
+	default:
+		goto error;
+	}
+
+	mmio_write_32(MVEBU_COMPHY_REG_BASE + COMPHY_SELECTOR_PHY_REG, reg);
+	return 0;
+error:
+	ERROR("COMPHY[%d] mode[%d] is invalid\n", comphy_index, mode);
+	return -EINVAL;
+}
+
+/*
+ * This is something like the inverse of the previous function: for given
+ * lane it returns COMPHY_*_MODE.
+ *
+ * It is useful when powering the phy off.
+ *
+ * This function returns COMPHY_USB3_MODE even if the phy was configured
+ * with COMPHY_USB3D_MODE or COMPHY_USB3H_MODE. (The usb3 phy initialization
+ * code does not differentiate between these modes.)
+ * Also it returns COMPHY_SGMII_MODE even if the phy was configures with
+ * COMPHY_2500BASEX_MODE. (The sgmii phy initialization code does differentiate
+ * between these modes, but it is irrelevant when powering the phy off.)
+ */
+static int mvebu_a3700_comphy_get_mode(uint8_t comphy_index)
+{
+	uint32_t reg;
+
+	reg = mmio_read_32(MVEBU_COMPHY_REG_BASE + COMPHY_SELECTOR_PHY_REG);
+	switch (comphy_index) {
+	case COMPHY_LANE0:
+		if ((reg & COMPHY_SELECTOR_USB3_GBE1_SEL_BIT) != 0)
+			return COMPHY_USB3_MODE;
+		else
+			return COMPHY_SGMII_MODE;
+	case COMPHY_LANE1:
+		if ((reg & COMPHY_SELECTOR_PCIE_GBE0_SEL_BIT) != 0)
+			return COMPHY_PCIE_MODE;
+		else
+			return COMPHY_SGMII_MODE;
+	case COMPHY_LANE2:
+		if ((reg & COMPHY_SELECTOR_USB3_PHY_SEL_BIT) != 0)
+			return COMPHY_USB3_MODE;
+		else
+			return COMPHY_SATA_MODE;
+	}
+
+	return COMPHY_UNUSED;
+}
+
+/* It is only used for SATA and USB3 on comphy lane2. */
+static void comphy_set_indirect(uintptr_t addr, uint32_t offset, uint16_t data,
+				uint16_t mask, bool is_sata)
+{
+	/*
+	 * When Lane 2 PHY is for USB3, access the PHY registers
+	 * through indirect Address and Data registers:
+	 * INDIR_ACC_PHY_ADDR (RD00E0178h [31:0]),
+	 * INDIR_ACC_PHY_DATA (RD00E017Ch [31:0]),
+	 * within the SATA Host Controller registers, Lane 2 base register
+	 * offset is 0x200
+	 */
+	if (is_sata) {
+		mmio_write_32(addr + COMPHY_LANE2_INDIR_ADDR_OFFSET, offset);
+	} else {
+		mmio_write_32(addr + COMPHY_LANE2_INDIR_ADDR_OFFSET,
+			      offset + USB3PHY_LANE2_REG_BASE_OFFSET);
+	}
+
+	reg_set(addr + COMPHY_LANE2_INDIR_DATA_OFFSET, data, mask);
+}
+
+/* It is only used for SATA on comphy lane2. */
+static void comphy_sata_set_indirect(uintptr_t addr, uint32_t reg_offset,
+				     uint16_t data, uint16_t mask)
+{
+	comphy_set_indirect(addr, reg_offset, data, mask, true);
+}
+
+/* It is only used for USB3 indirect access on comphy lane2. */
+static void comphy_usb3_set_indirect(uintptr_t addr, uint32_t reg_offset,
+				     uint16_t data, uint16_t mask)
+{
+	comphy_set_indirect(addr, reg_offset, data, mask, false);
+}
+
+/* It is only used for USB3 direct access not on comphy lane2. */
+static void comphy_usb3_set_direct(uintptr_t addr, uint32_t reg_offset,
+				   uint16_t data, uint16_t mask)
+{
+	reg_set16((reg_offset * PHY_SHFT(USB3) + addr), data, mask);
+}
+
+static void comphy_sgmii_phy_init(uintptr_t sd_ip_addr, bool is_1gbps)
+{
+	const int fix_arr_sz = ARRAY_SIZE(sgmii_phy_init_fix);
+	int addr, fix_idx;
+	uint16_t val;
+
+	fix_idx = 0;
+	for (addr = 0; addr < 512; addr++) {
+		/*
+		 * All PHY register values are defined in full for 3.125Gbps
+		 * SERDES speed. The values required for 1.25 Gbps are almost
+		 * the same and only few registers should be "fixed" in
+		 * comparison to 3.125 Gbps values. These register values are
+		 * stored in "sgmii_phy_init_fix" array.
+		 */
+		if (!is_1gbps && sgmii_phy_init_fix[fix_idx].addr == addr) {
+			/* Use new value */
+			val = sgmii_phy_init_fix[fix_idx].value;
+			if (fix_idx < fix_arr_sz)
+				fix_idx++;
+		} else {
+			val = sgmii_phy_init[addr];
+		}
+
+		reg_set16(SGMIIPHY_ADDR(addr, sd_ip_addr), val, 0xFFFF);
+	}
+}
+
+static int mvebu_a3700_comphy_sata_power_on(uint8_t comphy_index,
+					    uint32_t comphy_mode)
+{
+	int ret;
+	uint32_t offset, data = 0, ref_clk;
+	uintptr_t comphy_indir_regs = COMPHY_INDIRECT_REG;
+	int invert = COMPHY_GET_POLARITY_INVERT(comphy_mode);
+
+	debug_enter();
+
+	/* Configure phy selector for SATA */
+	ret = mvebu_a3700_comphy_set_phy_selector(comphy_index, comphy_mode);
+	if (ret) {
+		return ret;
+	}
+
+	/* Clear phy isolation mode to make it work in normal mode */
+	offset =  COMPHY_ISOLATION_CTRL + SATAPHY_LANE2_REG_BASE_OFFSET;
+	comphy_sata_set_indirect(comphy_indir_regs, offset, 0, PHY_ISOLATE_MODE);
+
+	/* 0. Check the Polarity invert bits */
+	if (invert & COMPHY_POLARITY_TXD_INVERT)
+		data |= TXD_INVERT_BIT;
+	if (invert & COMPHY_POLARITY_RXD_INVERT)
+		data |= RXD_INVERT_BIT;
+
+	offset = COMPHY_SYNC_PATTERN + SATAPHY_LANE2_REG_BASE_OFFSET;
+	comphy_sata_set_indirect(comphy_indir_regs, offset, data, TXD_INVERT_BIT |
+				 RXD_INVERT_BIT);
+
+	/* 1. Select 40-bit data width width */
+	offset = COMPHY_DIG_LOOPBACK_EN + SATAPHY_LANE2_REG_BASE_OFFSET;
+	comphy_sata_set_indirect(comphy_indir_regs, offset, DATA_WIDTH_40BIT,
+				 SEL_DATA_WIDTH_MASK);
+
+	/* 2. Select reference clock(25M) and PHY mode (SATA) */
+	offset = COMPHY_POWER_PLL_CTRL + SATAPHY_LANE2_REG_BASE_OFFSET;
+	if (get_ref_clk() == 40)
+		ref_clk = REF_FREF_SEL_SERDES_40MHZ;
+	else
+		ref_clk = REF_FREF_SEL_SERDES_25MHZ;
+
+	comphy_sata_set_indirect(comphy_indir_regs, offset, ref_clk | PHY_MODE_SATA,
+				 REF_FREF_SEL_MASK | PHY_MODE_MASK);
+
+	/* 3. Use maximum PLL rate (no power save) */
+	offset = COMPHY_KVCO_CAL_CTRL + SATAPHY_LANE2_REG_BASE_OFFSET;
+	comphy_sata_set_indirect(comphy_indir_regs, offset, USE_MAX_PLL_RATE_BIT,
+				 USE_MAX_PLL_RATE_BIT);
+
+	/* 4. Reset reserved bit */
+	comphy_sata_set_indirect(comphy_indir_regs, COMPHY_RESERVED_REG, 0,
+				 PHYCTRL_FRM_PIN_BIT);
+
+	/* 5. Set vendor-specific configuration (It is done in sata driver) */
+	/* XXX: in U-Boot below sequence was executed in this place, in Linux
+	 * not.  Now it is done only in U-Boot before this comphy
+	 * initialization - tests shows that it works ok, but in case of any
+	 * future problem it is left for reference.
+	 *   reg_set(MVEBU_REGS_BASE + 0xe00a0, 0, 0xffffffff);
+	 *   reg_set(MVEBU_REGS_BASE + 0xe00a4, BIT(6), BIT(6));
+	 */
+
+	/* Wait for > 55 us to allow PLL be enabled */
+	udelay(PLL_SET_DELAY_US);
+
+	/* Polling status */
+	mmio_write_32(comphy_indir_regs + COMPHY_LANE2_INDIR_ADDR_OFFSET,
+		      COMPHY_DIG_LOOPBACK_EN + SATAPHY_LANE2_REG_BASE_OFFSET);
+
+	ret = polling_with_timeout(comphy_indir_regs +
+				   COMPHY_LANE2_INDIR_DATA_OFFSET,
+				   PLL_READY_TX_BIT, PLL_READY_TX_BIT,
+				   COMPHY_PLL_TIMEOUT, REG_32BIT);
+	if (ret) {
+		return -ETIMEDOUT;
+	}
+
+	debug_exit();
+
+	return 0;
+}
+
+static int mvebu_a3700_comphy_sgmii_power_on(uint8_t comphy_index,
+					     uint32_t comphy_mode)
+{
+	int ret;
+	uint32_t mask, data;
+	uintptr_t offset;
+	uintptr_t sd_ip_addr;
+	int mode = COMPHY_GET_MODE(comphy_mode);
+	int invert = COMPHY_GET_POLARITY_INVERT(comphy_mode);
+
+	debug_enter();
+
+	/* Set selector */
+	ret = mvebu_a3700_comphy_set_phy_selector(comphy_index, comphy_mode);
+	if (ret) {
+		return ret;
+	}
+
+	/* Serdes IP Base address
+	 * COMPHY Lane0 -- USB3/GBE1
+	 * COMPHY Lane1 -- PCIe/GBE0
+	 */
+	if (comphy_index == COMPHY_LANE0) {
+		/* Get usb3 and gbe */
+		sd_ip_addr = USB3_GBE1_PHY;
+	} else
+		sd_ip_addr = COMPHY_SD_ADDR;
+
+	/*
+	 * 1. Reset PHY by setting PHY input port PIN_RESET=1.
+	 * 2. Set PHY input port PIN_TX_IDLE=1, PIN_PU_IVREF=1 to keep
+	 *    PHY TXP/TXN output to idle state during PHY initialization
+	 * 3. Set PHY input port PIN_PU_PLL=0, PIN_PU_RX=0, PIN_PU_TX=0.
+	 */
+	data = PIN_PU_IVREF_BIT | PIN_TX_IDLE_BIT | PIN_RESET_COMPHY_BIT;
+	mask = data | PIN_RESET_CORE_BIT | PIN_PU_PLL_BIT | PIN_PU_RX_BIT |
+		PIN_PU_TX_BIT;
+	offset = MVEBU_COMPHY_REG_BASE + COMPHY_PHY_CFG1_OFFSET(comphy_index);
+	reg_set(offset, data, mask);
+
+	/* 4. Release reset to the PHY by setting PIN_RESET=0. */
+	data = 0;
+	mask = PIN_RESET_COMPHY_BIT;
+	reg_set(offset, data, mask);
+
+	/*
+	 * 5. Set PIN_PHY_GEN_TX[3:0] and PIN_PHY_GEN_RX[3:0] to decide COMPHY
+	 * bit rate
+	 */
+	if (mode == COMPHY_SGMII_MODE) {
+		/* SGMII 1G, SerDes speed 1.25G */
+		data |= SD_SPEED_1_25_G << GEN_RX_SEL_OFFSET;
+		data |= SD_SPEED_1_25_G << GEN_TX_SEL_OFFSET;
+	} else if (mode == COMPHY_2500BASEX_MODE) {
+		/* 2500Base-X, SerDes speed 3.125G */
+		data |= SD_SPEED_3_125_G << GEN_RX_SEL_OFFSET;
+		data |= SD_SPEED_3_125_G << GEN_TX_SEL_OFFSET;
+	} else {
+		/* Other rates are not supported */
+		ERROR("unsupported SGMII speed on comphy lane%d\n",
+			comphy_index);
+		return -EINVAL;
+	}
+	mask = GEN_RX_SEL_MASK | GEN_TX_SEL_MASK;
+	reg_set(offset, data, mask);
+
+	/*
+	 * 6. Wait 10mS for bandgap and reference clocks to stabilize; then
+	 * start SW programming.
+	 */
+	mdelay(10);
+
+	/* 7. Program COMPHY register PHY_MODE */
+	data = PHY_MODE_SGMII;
+	mask = PHY_MODE_MASK;
+	reg_set16(SGMIIPHY_ADDR(COMPHY_POWER_PLL_CTRL, sd_ip_addr), data, mask);
+
+	/*
+	 * 8. Set COMPHY register REFCLK_SEL to select the correct REFCLK
+	 * source
+	 */
+	data = 0;
+	mask = PHY_REF_CLK_SEL;
+	reg_set16(SGMIIPHY_ADDR(COMPHY_MISC_CTRL0, sd_ip_addr), data, mask);
+
+	/*
+	 * 9. Set correct reference clock frequency in COMPHY register
+	 * REF_FREF_SEL.
+	 */
+	if (get_ref_clk() == 40)
+		data = REF_FREF_SEL_SERDES_50MHZ;
+	else
+		data = REF_FREF_SEL_SERDES_25MHZ;
+
+	mask = REF_FREF_SEL_MASK;
+	reg_set16(SGMIIPHY_ADDR(COMPHY_POWER_PLL_CTRL, sd_ip_addr), data, mask);
+
+	/* 10. Program COMPHY register PHY_GEN_MAX[1:0]
+	 * This step is mentioned in the flow received from verification team.
+	 * However the PHY_GEN_MAX value is only meaningful for other interfaces
+	 * (not SGMII). For instance, it selects SATA speed 1.5/3/6 Gbps or PCIe
+	 * speed 2.5/5 Gbps
+	 */
+
+	/*
+	 * 11. Program COMPHY register SEL_BITS to set correct parallel data
+	 * bus width
+	 */
+	data = DATA_WIDTH_10BIT;
+	mask = SEL_DATA_WIDTH_MASK;
+	reg_set16(SGMIIPHY_ADDR(COMPHY_DIG_LOOPBACK_EN, sd_ip_addr),
+		  data, mask);
+
+	/*
+	 * 12. As long as DFE function needs to be enabled in any mode,
+	 * COMPHY register DFE_UPDATE_EN[5:0] shall be programmed to 0x3F
+	 * for real chip during COMPHY power on.
+	 * The step 14 exists (and empty) in the original initialization flow
+	 * obtained from the verification team. According to the functional
+	 * specification DFE_UPDATE_EN already has the default value 0x3F
+	 */
+
+	/*
+	 * 13. Program COMPHY GEN registers.
+	 * These registers should be programmed based on the lab testing result
+	 * to achieve optimal performance. Please contact the CEA group to get
+	 * the related GEN table during real chip bring-up. We only required to
+	 * run though the entire registers programming flow defined by
+	 * "comphy_sgmii_phy_init" when the REF clock is 40 MHz. For REF clock
+	 * 25 MHz the default values stored in PHY registers are OK.
+	 */
+	debug("Running C-DPI phy init %s mode\n",
+	      mode == COMPHY_2500BASEX_MODE ? "2G5" : "1G");
+	if (get_ref_clk() == 40)
+		comphy_sgmii_phy_init(sd_ip_addr, mode != COMPHY_2500BASEX_MODE);
+
+	/*
+	 * 14. [Simulation Only] should not be used for real chip.
+	 * By pass power up calibration by programming EXT_FORCE_CAL_DONE
+	 * (R02h[9]) to 1 to shorten COMPHY simulation time.
+	 */
+
+	/*
+	 * 15. [Simulation Only: should not be used for real chip]
+	 * Program COMPHY register FAST_DFE_TIMER_EN=1 to shorten RX training
+	 * simulation time.
+	 */
+
+	/*
+	 * 16. Check the PHY Polarity invert bit
+	 */
+	data = 0x0;
+	if (invert & COMPHY_POLARITY_TXD_INVERT)
+		data |= TXD_INVERT_BIT;
+	if (invert & COMPHY_POLARITY_RXD_INVERT)
+		data |= RXD_INVERT_BIT;
+	mask = TXD_INVERT_BIT | RXD_INVERT_BIT;
+	reg_set16(SGMIIPHY_ADDR(COMPHY_SYNC_PATTERN, sd_ip_addr), data, mask);
+
+	/*
+	 * 17. Set PHY input ports PIN_PU_PLL, PIN_PU_TX and PIN_PU_RX to 1 to
+	 * start PHY power up sequence. All the PHY register programming should
+	 * be done before PIN_PU_PLL=1. There should be no register programming
+	 * for normal PHY operation from this point.
+	 */
+	reg_set(MVEBU_COMPHY_REG_BASE + COMPHY_PHY_CFG1_OFFSET(comphy_index),
+		PIN_PU_PLL_BIT | PIN_PU_RX_BIT | PIN_PU_TX_BIT,
+		PIN_PU_PLL_BIT | PIN_PU_RX_BIT | PIN_PU_TX_BIT);
+
+	/*
+	 * 18. Wait for PHY power up sequence to finish by checking output ports
+	 * PIN_PLL_READY_TX=1 and PIN_PLL_READY_RX=1.
+	 */
+	ret = polling_with_timeout(MVEBU_COMPHY_REG_BASE +
+				   COMPHY_PHY_STATUS_OFFSET(comphy_index),
+				   PHY_PLL_READY_TX_BIT | PHY_PLL_READY_RX_BIT,
+				   PHY_PLL_READY_TX_BIT | PHY_PLL_READY_RX_BIT,
+				   COMPHY_PLL_TIMEOUT, REG_32BIT);
+	if (ret) {
+		ERROR("Failed to lock PLL for SGMII PHY %d\n", comphy_index);
+		return -ETIMEDOUT;
+	}
+
+	/*
+	 * 19. Set COMPHY input port PIN_TX_IDLE=0
+	 */
+	reg_set(MVEBU_COMPHY_REG_BASE + COMPHY_PHY_CFG1_OFFSET(comphy_index),
+		0x0, PIN_TX_IDLE_BIT);
+
+	/*
+	 * 20. After valid data appear on PIN_RXDATA bus, set PIN_RX_INIT=1. To
+	 * start RX initialization. PIN_RX_INIT_DONE will be cleared to 0 by the
+	 * PHY After RX initialization is done, PIN_RX_INIT_DONE will be set to
+	 * 1 by COMPHY Set PIN_RX_INIT=0 after PIN_RX_INIT_DONE= 1. Please
+	 * refer to RX initialization part for details.
+	 */
+	reg_set(MVEBU_COMPHY_REG_BASE + COMPHY_PHY_CFG1_OFFSET(comphy_index),
+		PHY_RX_INIT_BIT, PHY_RX_INIT_BIT);
+
+	ret = polling_with_timeout(MVEBU_COMPHY_REG_BASE +
+				   COMPHY_PHY_STATUS_OFFSET(comphy_index),
+				   PHY_PLL_READY_TX_BIT | PHY_PLL_READY_RX_BIT,
+				   PHY_PLL_READY_TX_BIT | PHY_PLL_READY_RX_BIT,
+				   COMPHY_PLL_TIMEOUT, REG_32BIT);
+	if (ret) {
+		ERROR("Failed to lock PLL for SGMII PHY %d\n", comphy_index);
+		return -ETIMEDOUT;
+	}
+
+	ret = polling_with_timeout(MVEBU_COMPHY_REG_BASE +
+				   COMPHY_PHY_STATUS_OFFSET(comphy_index),
+				   PHY_RX_INIT_DONE_BIT, PHY_RX_INIT_DONE_BIT,
+				   COMPHY_PLL_TIMEOUT, REG_32BIT);
+	if (ret) {
+		ERROR("Failed to init RX of SGMII PHY %d\n", comphy_index);
+		return -ETIMEDOUT;
+	}
+
+	debug_exit();
+
+	return 0;
+}
+
+static int mvebu_a3700_comphy_sgmii_power_off(uint8_t comphy_index)
+{
+	uintptr_t offset;
+	uint32_t mask, data;
+
+	debug_enter();
+
+	data = PIN_RESET_CORE_BIT | PIN_RESET_COMPHY_BIT;
+	mask = data;
+	offset = MVEBU_COMPHY_REG_BASE + COMPHY_PHY_CFG1_OFFSET(comphy_index);
+	reg_set(offset, data, mask);
+
+	debug_exit();
+
+	return 0;
+}
+
+static int mvebu_a3700_comphy_usb3_power_on(uint8_t comphy_index,
+					    uint32_t comphy_mode)
+{
+	int ret;
+	uintptr_t reg_base = 0;
+	uintptr_t addr;
+	uint32_t mask, data, cfg, ref_clk;
+	void (*usb3_reg_set)(uintptr_t addr, uint32_t reg_offset, uint16_t data,
+			     uint16_t mask);
+	int invert = COMPHY_GET_POLARITY_INVERT(comphy_mode);
+
+	debug_enter();
+
+	/* Set phy seclector */
+	ret = mvebu_a3700_comphy_set_phy_selector(comphy_index, comphy_mode);
+	if (ret) {
+		return ret;
+	}
+
+	/* Set usb3 reg access func, Lane2 is indirect access */
+	if (comphy_index == COMPHY_LANE2) {
+		usb3_reg_set = &comphy_usb3_set_indirect;
+		reg_base = COMPHY_INDIRECT_REG;
+	} else {
+		/* Get the direct access register resource and map */
+		usb3_reg_set = &comphy_usb3_set_direct;
+		reg_base = USB3_GBE1_PHY;
+	}
+
+	/*
+	 * 0. Set PHY OTG Control(0x5d034), bit 4, Power up OTG module The
+	 * register belong to UTMI module, so it is set in UTMI phy driver.
+	 */
+
+	/*
+	 * 1. Set PRD_TXDEEMPH (3.5db de-emph)
+	 */
+	mask = PRD_TXDEEMPH0_MASK | PRD_TXMARGIN_MASK | PRD_TXSWING_MASK |
+		CFG_TX_ALIGN_POS_MASK;
+	usb3_reg_set(reg_base, COMPHY_LANE_CFG0, PRD_TXDEEMPH0_MASK, mask);
+
+	/*
+	 * 2. Set BIT0: enable transmitter in high impedance mode
+	 *    Set BIT[3:4]: delay 2 clock cycles for HiZ off latency
+	 *    Set BIT6: Tx detect Rx at HiZ mode
+	 *    Unset BIT15: set to 0 to set USB3 De-emphasize level to -3.5db
+	 *            together with bit 0 of COMPHY_LANE_CFG0 register
+	 */
+	mask = PRD_TXDEEMPH1_MASK | TX_DET_RX_MODE | GEN2_TX_DATA_DLY_MASK |
+		TX_ELEC_IDLE_MODE_EN;
+	data = TX_DET_RX_MODE | GEN2_TX_DATA_DLY_DEFT | TX_ELEC_IDLE_MODE_EN;
+	usb3_reg_set(reg_base, COMPHY_LANE_CFG1, data, mask);
+
+	/*
+	 * 3. Set Spread Spectrum Clock Enabled
+	 */
+	usb3_reg_set(reg_base, COMPHY_LANE_CFG4,
+		     SPREAD_SPECTRUM_CLK_EN, SPREAD_SPECTRUM_CLK_EN);
+
+	/*
+	 * 4. Set Override Margining Controls From the MAC:
+	 *    Use margining signals from lane configuration
+	 */
+	usb3_reg_set(reg_base, COMPHY_TEST_MODE_CTRL,
+		     MODE_MARGIN_OVERRIDE, REG_16_BIT_MASK);
+
+	/*
+	 * 5. Set Lane-to-Lane Bundle Clock Sampling Period = per PCLK cycles
+	 *    set Mode Clock Source = PCLK is generated from REFCLK
+	 */
+	usb3_reg_set(reg_base, COMPHY_CLK_SRC_LO, 0x0,
+		     (MODE_CLK_SRC | BUNDLE_PERIOD_SEL |
+		      BUNDLE_PERIOD_SCALE_MASK | BUNDLE_SAMPLE_CTRL |
+		      PLL_READY_DLY_MASK));
+
+	/*
+	 * 6. Set G2 Spread Spectrum Clock Amplitude at 4K
+	 */
+	usb3_reg_set(reg_base, COMPHY_GEN2_SET2,
+		     GS2_TX_SSC_AMP_VALUE_20, GS2_TX_SSC_AMP_MASK);
+
+	/*
+	 * 7. Unset G3 Spread Spectrum Clock Amplitude
+	 *    set G3 TX and RX Register Master Current Select
+	 */
+	mask = GS2_TX_SSC_AMP_MASK | GS2_VREG_RXTX_MAS_ISET_MASK |
+		GS2_RSVD_6_0_MASK;
+	usb3_reg_set(reg_base, COMPHY_GEN3_SET2,
+		     GS2_VREG_RXTX_MAS_ISET_60U, mask);
+
+	/*
+	 * 8. Check crystal jumper setting and program the Power and PLL Control
+	 * accordingly Change RX wait
+	 */
+	if (get_ref_clk() == 40) {
+		ref_clk = REF_FREF_SEL_PCIE_USB3_40MHZ;
+		cfg = CFG_PM_RXDLOZ_WAIT_12_UNIT;
+
+	} else {
+		/* 25 MHz */
+		ref_clk = REF_FREF_SEL_PCIE_USB3_25MHZ;
+		cfg = CFG_PM_RXDLOZ_WAIT_7_UNIT;
+	}
+
+	mask = PU_IVREF_BIT | PU_PLL_BIT | PU_RX_BIT | PU_TX_BIT |
+		PU_TX_INTP_BIT | PU_DFE_BIT | PLL_LOCK_BIT | PHY_MODE_MASK |
+		REF_FREF_SEL_MASK;
+	data = PU_IVREF_BIT | PU_PLL_BIT | PU_RX_BIT | PU_TX_BIT |
+		PU_TX_INTP_BIT | PU_DFE_BIT | PHY_MODE_USB3 | ref_clk;
+	usb3_reg_set(reg_base, COMPHY_POWER_PLL_CTRL, data,  mask);
+
+	mask = CFG_PM_OSCCLK_WAIT_MASK | CFG_PM_RXDEN_WAIT_MASK |
+		CFG_PM_RXDLOZ_WAIT_MASK;
+	data = CFG_PM_RXDEN_WAIT_1_UNIT  | cfg;
+	usb3_reg_set(reg_base, COMPHY_PWR_MGM_TIM1, data, mask);
+
+	/*
+	 * 9. Enable idle sync
+	 */
+	data = IDLE_SYNC_EN_DEFAULT_VALUE | IDLE_SYNC_EN;
+	usb3_reg_set(reg_base, COMPHY_IDLE_SYNC_EN, data, REG_16_BIT_MASK);
+
+	/*
+	 * 10. Enable the output of 500M clock
+	 */
+	data = MISC_CTRL0_DEFAULT_VALUE | CLK500M_EN;
+	usb3_reg_set(reg_base, COMPHY_MISC_CTRL0, data, REG_16_BIT_MASK);
+
+	/*
+	 * 11. Set 20-bit data width
+	 */
+	usb3_reg_set(reg_base, COMPHY_DIG_LOOPBACK_EN, DATA_WIDTH_20BIT,
+		     REG_16_BIT_MASK);
+
+	/*
+	 * 12. Override Speed_PLL value and use MAC PLL
+	 */
+	usb3_reg_set(reg_base, COMPHY_KVCO_CAL_CTRL,
+		     (SPEED_PLL_VALUE_16 | USE_MAX_PLL_RATE_BIT),
+		     REG_16_BIT_MASK);
+
+	/*
+	 * 13. Check the Polarity invert bit
+	 */
+	data = 0U;
+	if (invert & COMPHY_POLARITY_TXD_INVERT) {
+		data |= TXD_INVERT_BIT;
+	}
+	if (invert & COMPHY_POLARITY_RXD_INVERT) {
+		data |= RXD_INVERT_BIT;
+	}
+	mask = TXD_INVERT_BIT | RXD_INVERT_BIT;
+	usb3_reg_set(reg_base, COMPHY_SYNC_PATTERN, data, mask);
+
+	/*
+	 * 14. Set max speed generation to USB3.0 5Gbps
+	 */
+	usb3_reg_set(reg_base, COMPHY_SYNC_MASK_GEN, PHY_GEN_MAX_USB3_5G,
+		     PHY_GEN_MAX_MASK);
+
+	/*
+	 * 15. Set capacitor value for FFE gain peaking to 0xF
+	 */
+	usb3_reg_set(reg_base, COMPHY_GEN2_SET3,
+		     GS3_FFE_CAP_SEL_VALUE, GS3_FFE_CAP_SEL_MASK);
+
+	/*
+	 * 16. Release SW reset
+	 */
+	data = MODE_CORE_CLK_FREQ_SEL | MODE_PIPE_WIDTH_32 | MODE_REFDIV_BY_4;
+	usb3_reg_set(reg_base, COMPHY_RST_CLK_CTRL, data, REG_16_BIT_MASK);
+
+	/* Wait for > 55 us to allow PCLK be enabled */
+	udelay(PLL_SET_DELAY_US);
+
+	if (comphy_index == COMPHY_LANE2) {
+		data = COMPHY_LANE_STAT1 + USB3PHY_LANE2_REG_BASE_OFFSET;
+		mmio_write_32(reg_base + COMPHY_LANE2_INDIR_ADDR_OFFSET,
+			      data);
+
+		addr = reg_base + COMPHY_LANE2_INDIR_DATA_OFFSET;
+		ret = polling_with_timeout(addr, TXDCLK_PCLK_EN, TXDCLK_PCLK_EN,
+					   COMPHY_PLL_TIMEOUT, REG_32BIT);
+	} else {
+		ret = polling_with_timeout(LANE_STAT1_ADDR(USB3) + reg_base,
+					   TXDCLK_PCLK_EN, TXDCLK_PCLK_EN,
+					   COMPHY_PLL_TIMEOUT, REG_16BIT);
+	}
+	if (ret) {
+		ERROR("Failed to lock USB3 PLL\n");
+		return -ETIMEDOUT;
+	}
+
+	debug_exit();
+
+	return 0;
+}
+
+static int mvebu_a3700_comphy_pcie_power_on(uint8_t comphy_index,
+					    uint32_t comphy_mode)
+{
+	int ret;
+	uint32_t ref_clk;
+	uint32_t mask, data;
+	int invert = COMPHY_GET_POLARITY_INVERT(comphy_mode);
+
+	debug_enter();
+
+	/* Configure phy selector for PCIe */
+	ret = mvebu_a3700_comphy_set_phy_selector(comphy_index, comphy_mode);
+	if (ret) {
+		return ret;
+	}
+
+	/* 1. Enable max PLL. */
+	reg_set16(LANE_CFG1_ADDR(PCIE) + COMPHY_SD_ADDR,
+		  USE_MAX_PLL_RATE_EN, USE_MAX_PLL_RATE_EN);
+
+	/* 2. Select 20 bit SERDES interface. */
+	reg_set16(CLK_SRC_LO_ADDR(PCIE) + COMPHY_SD_ADDR,
+		  CFG_SEL_20B, CFG_SEL_20B);
+
+	/* 3. Force to use reg setting for PCIe mode */
+	reg_set16(MISC_CTRL1_ADDR(PCIE) + COMPHY_SD_ADDR,
+		  SEL_BITS_PCIE_FORCE, SEL_BITS_PCIE_FORCE);
+
+	/* 4. Change RX wait */
+	reg_set16(PWR_MGM_TIM1_ADDR(PCIE) + COMPHY_SD_ADDR,
+		  CFG_PM_RXDEN_WAIT_1_UNIT | CFG_PM_RXDLOZ_WAIT_12_UNIT,
+		  (CFG_PM_OSCCLK_WAIT_MASK | CFG_PM_RXDEN_WAIT_MASK |
+		   CFG_PM_RXDLOZ_WAIT_MASK));
+
+	/* 5. Enable idle sync */
+	reg_set16(IDLE_SYNC_EN_ADDR(PCIE) + COMPHY_SD_ADDR,
+		  IDLE_SYNC_EN_DEFAULT_VALUE | IDLE_SYNC_EN, REG_16_BIT_MASK);
+
+	/* 6. Enable the output of 100M/125M/500M clock */
+	reg_set16(MISC_CTRL0_ADDR(PCIE) + COMPHY_SD_ADDR,
+		  MISC_CTRL0_DEFAULT_VALUE | CLK500M_EN | TXDCLK_2X_SEL | CLK100M_125M_EN,
+		  REG_16_BIT_MASK);
+
+	/*
+	 * 7. Enable TX, PCIE global register, 0xd0074814, it is done in
+	 * PCI-E driver
+	 */
+
+	/*
+	 * 8. Check crystal jumper setting and program the Power and PLL
+	 * Control accordingly
+	 */
+
+	if (get_ref_clk() == 40)
+		ref_clk = REF_FREF_SEL_PCIE_USB3_40MHZ;
+	else
+		ref_clk = REF_FREF_SEL_PCIE_USB3_25MHZ;
+
+	reg_set16(PWR_PLL_CTRL_ADDR(PCIE) + COMPHY_SD_ADDR,
+		  (PU_IVREF_BIT | PU_PLL_BIT | PU_RX_BIT | PU_TX_BIT |
+		   PU_TX_INTP_BIT | PU_DFE_BIT | ref_clk | PHY_MODE_PCIE),
+		  REG_16_BIT_MASK);
+
+	/* 9. Override Speed_PLL value and use MAC PLL */
+	reg_set16(KVCO_CAL_CTRL_ADDR(PCIE) + COMPHY_SD_ADDR,
+		  SPEED_PLL_VALUE_16 | USE_MAX_PLL_RATE_BIT, REG_16_BIT_MASK);
+
+	/* 10. Check the Polarity invert bit */
+	data = 0U;
+	if (invert & COMPHY_POLARITY_TXD_INVERT) {
+		data |= TXD_INVERT_BIT;
+	}
+	if (invert & COMPHY_POLARITY_RXD_INVERT) {
+		data |= RXD_INVERT_BIT;
+	}
+	mask = TXD_INVERT_BIT | RXD_INVERT_BIT;
+	reg_set16(SYNC_PATTERN_ADDR(PCIE) + COMPHY_SD_ADDR, data, mask);
+
+	/* 11. Release SW reset */
+	data = MODE_CORE_CLK_FREQ_SEL | MODE_PIPE_WIDTH_32;
+	mask = data | SOFT_RESET | MODE_REFDIV_MASK;
+	reg_set16(RST_CLK_CTRL_ADDR(PCIE) + COMPHY_SD_ADDR, data, mask);
+
+	/* Wait for > 55 us to allow PCLK be enabled */
+	udelay(PLL_SET_DELAY_US);
+
+	ret = polling_with_timeout(LANE_STAT1_ADDR(PCIE) + COMPHY_SD_ADDR,
+				   TXDCLK_PCLK_EN, TXDCLK_PCLK_EN,
+				   COMPHY_PLL_TIMEOUT, REG_16BIT);
+	if (ret) {
+		ERROR("Failed to lock PCIE PLL\n");
+		return -ETIMEDOUT;
+	}
+
+	debug_exit();
+
+	return 0;
+}
+
+int mvebu_3700_comphy_power_on(uint8_t comphy_index, uint32_t comphy_mode)
+{
+	int mode = COMPHY_GET_MODE(comphy_mode);
+	int ret = 0;
+
+	debug_enter();
+
+	switch (mode) {
+	case(COMPHY_SATA_MODE):
+		ret = mvebu_a3700_comphy_sata_power_on(comphy_index,
+						       comphy_mode);
+		break;
+	case(COMPHY_SGMII_MODE):
+	case(COMPHY_2500BASEX_MODE):
+		ret = mvebu_a3700_comphy_sgmii_power_on(comphy_index,
+							comphy_mode);
+		break;
+	case (COMPHY_USB3_MODE):
+	case (COMPHY_USB3H_MODE):
+		ret = mvebu_a3700_comphy_usb3_power_on(comphy_index,
+						       comphy_mode);
+		break;
+	case (COMPHY_PCIE_MODE):
+		ret = mvebu_a3700_comphy_pcie_power_on(comphy_index,
+						       comphy_mode);
+		break;
+	default:
+		ERROR("comphy%d: unsupported comphy mode\n", comphy_index);
+		ret = -EINVAL;
+		break;
+	}
+
+	debug_exit();
+
+	return ret;
+}
+
+static int mvebu_a3700_comphy_usb3_power_off(void)
+{
+	/*
+	 * Currently the USB3 MAC will control the USB3 PHY to set it to low
+	 * state, thus do not need to power off USB3 PHY again.
+	 */
+	debug_enter();
+	debug_exit();
+
+	return 0;
+}
+
+static int mvebu_a3700_comphy_sata_power_off(void)
+{
+	uintptr_t comphy_indir_regs = COMPHY_INDIRECT_REG;
+	uint32_t offset;
+
+	debug_enter();
+
+	/* Set phy isolation mode */
+	offset = COMPHY_ISOLATION_CTRL + SATAPHY_LANE2_REG_BASE_OFFSET;
+	comphy_sata_set_indirect(comphy_indir_regs, offset, PHY_ISOLATE_MODE,
+				 PHY_ISOLATE_MODE);
+
+	/* Power off PLL, Tx, Rx */
+	offset = COMPHY_POWER_PLL_CTRL + SATAPHY_LANE2_REG_BASE_OFFSET;
+	comphy_sata_set_indirect(comphy_indir_regs, offset, 0,
+				 PU_PLL_BIT | PU_RX_BIT | PU_TX_BIT);
+
+	debug_exit();
+
+	return 0;
+}
+
+int mvebu_3700_comphy_power_off(uint8_t comphy_index, uint32_t comphy_mode)
+{
+	int mode = COMPHY_GET_MODE(comphy_mode);
+	int err = 0;
+
+	debug_enter();
+
+	if (!mode) {
+		/*
+		 * The user did not specify which mode should be powered off.
+		 * In this case we can identify this by reading the phy selector
+		 * register.
+		 */
+		mode = mvebu_a3700_comphy_get_mode(comphy_index);
+	}
+
+	switch (mode) {
+	case(COMPHY_SGMII_MODE):
+	case(COMPHY_2500BASEX_MODE):
+		err = mvebu_a3700_comphy_sgmii_power_off(comphy_index);
+		break;
+	case (COMPHY_USB3_MODE):
+	case (COMPHY_USB3H_MODE):
+		err = mvebu_a3700_comphy_usb3_power_off();
+		break;
+	case (COMPHY_SATA_MODE):
+		err = mvebu_a3700_comphy_sata_power_off();
+		break;
+
+	default:
+		debug("comphy%d: power off is not implemented for mode %d\n",
+		      comphy_index, mode);
+		break;
+	}
+
+	debug_exit();
+
+	return err;
+}
+
+static int mvebu_a3700_comphy_sata_is_pll_locked(void)
+{
+	uint32_t data, addr;
+	uintptr_t comphy_indir_regs = COMPHY_INDIRECT_REG;
+	int ret = 0;
+
+	debug_enter();
+
+	/* Polling status */
+	mmio_write_32(comphy_indir_regs + COMPHY_LANE2_INDIR_ADDR_OFFSET,
+	       COMPHY_DIG_LOOPBACK_EN + SATAPHY_LANE2_REG_BASE_OFFSET);
+	addr = comphy_indir_regs + COMPHY_LANE2_INDIR_DATA_OFFSET;
+	data = polling_with_timeout(addr, PLL_READY_TX_BIT, PLL_READY_TX_BIT,
+				    COMPHY_PLL_TIMEOUT, REG_32BIT);
+
+	if (data != 0) {
+		ERROR("TX PLL is not locked\n");
+		ret = -ETIMEDOUT;
+	}
+
+	debug_exit();
+
+	return ret;
+}
+
+int mvebu_3700_comphy_is_pll_locked(uint8_t comphy_index, uint32_t comphy_mode)
+{
+	int mode = COMPHY_GET_MODE(comphy_mode);
+	int ret = 0;
+
+	debug_enter();
+
+	switch (mode) {
+	case(COMPHY_SATA_MODE):
+		ret = mvebu_a3700_comphy_sata_is_pll_locked();
+		break;
+
+	default:
+		ERROR("comphy[%d] mode[%d] doesn't support PLL lock check\n",
+			comphy_index, mode);
+		ret = -EINVAL;
+		break;
+	}
+
+	debug_exit();
+
+	return ret;
+}
diff --git a/drivers/marvell/comphy/phy-comphy-3700.h b/drivers/marvell/comphy/phy-comphy-3700.h
new file mode 100644
index 0000000..ed07624
--- /dev/null
+++ b/drivers/marvell/comphy/phy-comphy-3700.h
@@ -0,0 +1,249 @@
+/*
+ * Copyright (C) 2018-2021 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef PHY_COMPHY_3700_H
+#define PHY_COMPHY_3700_H
+
+#define PLL_SET_DELAY_US			600
+#define COMPHY_PLL_TIMEOUT			1000
+#define REG_16_BIT_MASK				0xFFFF
+
+#define COMPHY_SELECTOR_PHY_REG			0xFC
+/* bit0: 0: Lane1 is GbE0; 1: Lane1 is PCIE */
+#define COMPHY_SELECTOR_PCIE_GBE0_SEL_BIT	BIT(0)
+/* bit4: 0: Lane0 is GbE1; 1: Lane0 is USB3 */
+#define COMPHY_SELECTOR_USB3_GBE1_SEL_BIT	BIT(4)
+/* bit8: 0: Lane0 is USB3 instead of GbE1, Lane2 is SATA; 1: Lane2 is USB3 */
+#define COMPHY_SELECTOR_USB3_PHY_SEL_BIT	BIT(8)
+
+/* SATA PHY register offset */
+#define SATAPHY_LANE2_REG_BASE_OFFSET		0x200
+
+/* USB3 PHY offset compared to SATA PHY */
+#define USB3PHY_LANE2_REG_BASE_OFFSET		0x200
+
+/* Comphy lane2 indirect access register offset */
+#define COMPHY_LANE2_INDIR_ADDR_OFFSET		0x0
+#define COMPHY_LANE2_INDIR_DATA_OFFSET		0x4
+
+/* PHY shift to get related register address */
+enum {
+	PCIE = 1,
+	USB3,
+};
+
+#define PCIEPHY_SHFT		2
+#define USB3PHY_SHFT		2
+#define PHY_SHFT(unit)		((unit == PCIE) ? PCIEPHY_SHFT : USB3PHY_SHFT)
+
+/* PHY register */
+#define COMPHY_POWER_PLL_CTRL		0x01
+#define PWR_PLL_CTRL_ADDR(unit)		(COMPHY_POWER_PLL_CTRL * PHY_SHFT(unit))
+#define PU_IVREF_BIT			BIT(15)
+#define PU_PLL_BIT			BIT(14)
+#define PU_RX_BIT			BIT(13)
+#define PU_TX_BIT			BIT(12)
+#define PU_TX_INTP_BIT			BIT(11)
+#define PU_DFE_BIT			BIT(10)
+#define RESET_DTL_RX_BIT		BIT(9)
+#define PLL_LOCK_BIT			BIT(8)
+#define REF_FREF_SEL_OFFSET		0
+#define REF_FREF_SEL_MASK		(0x1F << REF_FREF_SEL_OFFSET)
+#define REF_FREF_SEL_SERDES_25MHZ	(0x1 << REF_FREF_SEL_OFFSET)
+#define REF_FREF_SEL_SERDES_40MHZ	(0x3 << REF_FREF_SEL_OFFSET)
+#define REF_FREF_SEL_SERDES_50MHZ	(0x4 << REF_FREF_SEL_OFFSET)
+#define REF_FREF_SEL_PCIE_USB3_25MHZ	(0x2 << REF_FREF_SEL_OFFSET)
+#define REF_FREF_SEL_PCIE_USB3_40MHZ	(0x3 << REF_FREF_SEL_OFFSET)
+#define PHY_MODE_OFFSET			5
+#define PHY_MODE_MASK			(7 << PHY_MODE_OFFSET)
+#define PHY_MODE_SATA			(0x0 << PHY_MODE_OFFSET)
+#define PHY_MODE_PCIE			(0x3 << PHY_MODE_OFFSET)
+#define PHY_MODE_SGMII			(0x4 << PHY_MODE_OFFSET)
+#define PHY_MODE_USB3			(0x5 << PHY_MODE_OFFSET)
+
+#define COMPHY_KVCO_CAL_CTRL		0x02
+#define KVCO_CAL_CTRL_ADDR(unit)	(COMPHY_KVCO_CAL_CTRL * PHY_SHFT(unit))
+#define USE_MAX_PLL_RATE_BIT		BIT(12)
+#define SPEED_PLL_OFFSET		2
+#define SPEED_PLL_MASK			(0x3F << SPEED_PLL_OFFSET)
+#define SPEED_PLL_VALUE_16		(0x10 << SPEED_PLL_OFFSET)
+
+#define COMPHY_DIG_LOOPBACK_EN		0x23
+#define DIG_LOOPBACK_EN_ADDR(unit)	(COMPHY_DIG_LOOPBACK_EN * \
+					 PHY_SHFT(unit))
+#define SEL_DATA_WIDTH_OFFSET		10
+#define SEL_DATA_WIDTH_MASK		(0x3 << SEL_DATA_WIDTH_OFFSET)
+#define DATA_WIDTH_10BIT		(0x0 << SEL_DATA_WIDTH_OFFSET)
+#define DATA_WIDTH_20BIT		(0x1 << SEL_DATA_WIDTH_OFFSET)
+#define DATA_WIDTH_40BIT		(0x2 << SEL_DATA_WIDTH_OFFSET)
+#define PLL_READY_TX_BIT		BIT(4)
+
+#define COMPHY_SYNC_PATTERN		0x24
+#define SYNC_PATTERN_ADDR(unit)		(COMPHY_SYNC_PATTERN * PHY_SHFT(unit))
+#define TXD_INVERT_BIT			BIT(10)
+#define RXD_INVERT_BIT			BIT(11)
+
+#define COMPHY_SYNC_MASK_GEN		0x25
+#define PHY_GEN_MAX_OFFSET		10
+#define PHY_GEN_MAX_MASK		(3 << PHY_GEN_MAX_OFFSET)
+#define PHY_GEN_MAX_USB3_5G		(1 << PHY_GEN_MAX_OFFSET)
+
+#define COMPHY_ISOLATION_CTRL		0x26
+#define ISOLATION_CTRL_ADDR(unit)	(COMPHY_ISOLATION_REG * PHY_SHFT(unit))
+#define PHY_ISOLATE_MODE		BIT(15)
+
+#define COMPHY_GEN2_SET2		0x3e
+#define GEN2_SET2_ADDR(unit)		(COMPHY_GEN2_SET2 * PHY_SHFT(unit))
+#define GS2_TX_SSC_AMP_VALUE_20		BIT(14)
+#define GS2_TX_SSC_AMP_OFF		9
+#define GS2_TX_SSC_AMP_LEN		7
+#define GS2_TX_SSC_AMP_MASK		(((1 << GS2_TX_SSC_AMP_LEN) - 1) << \
+					 GS2_TX_SSC_AMP_OFF)
+#define GS2_VREG_RXTX_MAS_ISET_OFF	7
+#define GS2_VREG_RXTX_MAS_ISET_60U	(0 << GS2_VREG_RXTX_MAS_ISET_OFF)
+#define GS2_VREG_RXTX_MAS_ISET_80U	(1 << GS2_VREG_RXTX_MAS_ISET_OFF)
+#define GS2_VREG_RXTX_MAS_ISET_100U	(2 << GS2_VREG_RXTX_MAS_ISET_OFF)
+#define GS2_VREG_RXTX_MAS_ISET_120U	(3 << GS2_VREG_RXTX_MAS_ISET_OFF)
+#define GS2_VREG_RXTX_MAS_ISET_MASK	(BIT(7) | BIT(8))
+#define GS2_RSVD_6_0_OFF		0
+#define GS2_RSVD_6_0_LEN		7
+#define GS2_RSVD_6_0_MASK		(((1 << GS2_RSVD_6_0_LEN) - 1) << \
+					 GS2_RSVD_6_0_OFF)
+
+#define COMPHY_GEN3_SET2		0x3f
+#define GEN3_SET2_ADDR(unit)		(COMPHY_GEN3_SET2 * PHY_SHFT(unit))
+
+#define COMPHY_IDLE_SYNC_EN		0x48
+#define IDLE_SYNC_EN_ADDR(unit)		(COMPHY_IDLE_SYNC_EN * PHY_SHFT(unit))
+#define IDLE_SYNC_EN			BIT(12)
+#define IDLE_SYNC_EN_DEFAULT_VALUE	0x60
+
+#define COMPHY_MISC_CTRL0		0x4F
+#define MISC_CTRL0_ADDR(unit)		(COMPHY_MISC_CTRL0 * PHY_SHFT(unit))
+#define CLK100M_125M_EN			BIT(4)
+#define TXDCLK_2X_SEL			BIT(6)
+#define CLK500M_EN			BIT(7)
+#define PHY_REF_CLK_SEL			BIT(10)
+#define MISC_CTRL0_DEFAULT_VALUE	0xA00D
+
+#define COMPHY_MISC_CTRL1		0x73
+#define MISC_CTRL1_ADDR(unit)		(COMPHY_MISC_CTRL1 * PHY_SHFT(unit))
+#define SEL_BITS_PCIE_FORCE		BIT(15)
+
+#define COMPHY_GEN2_SET3		0x112
+#define GS3_FFE_CAP_SEL_MASK		0xF
+#define GS3_FFE_CAP_SEL_VALUE		0xF
+
+#define COMPHY_LANE_CFG0		0x180
+#define LANE_CFG0_ADDR(unit)		(COMPHY_LANE_CFG0 * PHY_SHFT(unit))
+#define PRD_TXDEEMPH0_MASK		BIT(0)
+#define PRD_TXMARGIN_MASK		(BIT(1) | BIT(2) | BIT(3))
+#define PRD_TXSWING_MASK		BIT(4)
+#define CFG_TX_ALIGN_POS_MASK		(BIT(5) | BIT(6) | BIT(7) | BIT(8))
+
+#define COMPHY_LANE_CFG1		0x181
+#define LANE_CFG1_ADDR(unit)		(COMPHY_LANE_CFG1 * PHY_SHFT(unit))
+#define PRD_TXDEEMPH1_MASK		BIT(15)
+#define USE_MAX_PLL_RATE_EN		BIT(9)
+#define TX_DET_RX_MODE			BIT(6)
+#define GEN2_TX_DATA_DLY_MASK		(BIT(3) | BIT(4))
+#define GEN2_TX_DATA_DLY_DEFT		(2 << 3)
+#define TX_ELEC_IDLE_MODE_EN		BIT(0)
+
+#define COMPHY_LANE_STAT1		0x183
+#define LANE_STAT1_ADDR(unit)		(COMPHY_LANE_STAT1 * PHY_SHFT(unit))
+#define TXDCLK_PCLK_EN				BIT(0)
+
+#define COMPHY_LANE_CFG4		0x188
+#define LANE_CFG4_ADDR(unit)		(COMPHY_LANE_CFG4 * PHY_SHFT(unit))
+#define SPREAD_SPECTRUM_CLK_EN		BIT(7)
+
+#define COMPHY_RST_CLK_CTRL		0x1C1
+#define RST_CLK_CTRL_ADDR(unit)		(COMPHY_RST_CLK_CTRL * PHY_SHFT(unit))
+#define SOFT_RESET			BIT(0)
+#define MODE_CORE_CLK_FREQ_SEL		BIT(9)
+#define MODE_PIPE_WIDTH_32		BIT(3)
+#define MODE_REFDIV_OFFSET		4
+#define MODE_REFDIV_LEN			2
+#define MODE_REFDIV_MASK		(0x3 << MODE_REFDIV_OFFSET)
+#define MODE_REFDIV_BY_4		(0x2 << MODE_REFDIV_OFFSET)
+
+#define COMPHY_TEST_MODE_CTRL		0x1C2
+#define TEST_MODE_CTRL_ADDR(unit)	(COMPHY_TEST_MODE_CTRL * PHY_SHFT(unit))
+#define MODE_MARGIN_OVERRIDE		BIT(2)
+
+#define COMPHY_CLK_SRC_LO		0x1C3
+#define CLK_SRC_LO_ADDR(unit)		(COMPHY_CLK_SRC_LO * PHY_SHFT(unit))
+#define MODE_CLK_SRC			BIT(0)
+#define BUNDLE_PERIOD_SEL		BIT(1)
+#define BUNDLE_PERIOD_SCALE_MASK	(BIT(2) | BIT(3))
+#define BUNDLE_SAMPLE_CTRL		BIT(4)
+#define PLL_READY_DLY_MASK		(BIT(5) | BIT(6) | BIT(7))
+#define CFG_SEL_20B			BIT(15)
+
+#define COMPHY_PWR_MGM_TIM1		0x1D0
+#define PWR_MGM_TIM1_ADDR(unit)		(COMPHY_PWR_MGM_TIM1 * PHY_SHFT(unit))
+#define CFG_PM_OSCCLK_WAIT_OFF		12
+#define CFG_PM_OSCCLK_WAIT_LEN		4
+#define CFG_PM_OSCCLK_WAIT_MASK		(((1 << CFG_PM_OSCCLK_WAIT_LEN) - 1) \
+					 << CFG_PM_OSCCLK_WAIT_OFF)
+#define CFG_PM_RXDEN_WAIT_OFF		8
+#define CFG_PM_RXDEN_WAIT_LEN		4
+#define CFG_PM_RXDEN_WAIT_MASK		(((1 << CFG_PM_RXDEN_WAIT_LEN) - 1) \
+					 << CFG_PM_RXDEN_WAIT_OFF)
+#define CFG_PM_RXDEN_WAIT_1_UNIT	(1 << CFG_PM_RXDEN_WAIT_OFF)
+#define CFG_PM_RXDLOZ_WAIT_OFF		0
+#define CFG_PM_RXDLOZ_WAIT_LEN		8
+#define CFG_PM_RXDLOZ_WAIT_MASK		(((1 << CFG_PM_RXDLOZ_WAIT_LEN) - 1) \
+					 << CFG_PM_RXDLOZ_WAIT_OFF)
+#define CFG_PM_RXDLOZ_WAIT_7_UNIT	(7 << CFG_PM_RXDLOZ_WAIT_OFF)
+#define CFG_PM_RXDLOZ_WAIT_12_UNIT	(0xC << CFG_PM_RXDLOZ_WAIT_OFF)
+
+/*
+ * This register is not from PHY lane register space. It only exists in the
+ * indirect register space, before the actual PHY lane 2 registers. So the
+ * offset is absolute, not relative to SATAPHY_LANE2_REG_BASE_OFFSET.
+ * It is used only for SATA PHY initialization.
+ */
+#define COMPHY_RESERVED_REG		0x0E
+#define PHYCTRL_FRM_PIN_BIT		BIT(13)
+
+/* SGMII */
+#define COMPHY_PHY_CFG1_OFFSET(lane)	((1 - (lane)) * 0x28)
+#define PIN_PU_IVREF_BIT		BIT(1)
+#define PIN_RESET_CORE_BIT		BIT(11)
+#define PIN_RESET_COMPHY_BIT		BIT(12)
+#define PIN_PU_PLL_BIT			BIT(16)
+#define PIN_PU_RX_BIT			BIT(17)
+#define PIN_PU_TX_BIT			BIT(18)
+#define PIN_TX_IDLE_BIT			BIT(19)
+#define GEN_RX_SEL_OFFSET		22
+#define GEN_RX_SEL_MASK			(0xF << GEN_RX_SEL_OFFSET)
+#define GEN_TX_SEL_OFFSET		26
+#define GEN_TX_SEL_MASK			(0xF << GEN_TX_SEL_OFFSET)
+#define PHY_RX_INIT_BIT			BIT(30)
+#define SD_SPEED_1_25_G			0x6
+#define SD_SPEED_3_125_G		0x8
+
+/* COMPHY status reg:
+ * lane0: USB3/GbE1 PHY Status 1
+ * lane1: PCIe/GbE0 PHY Status 1
+ */
+#define COMPHY_PHY_STATUS_OFFSET(lane)	(0x18 + (1 - (lane)) * 0x28)
+#define PHY_RX_INIT_DONE_BIT		BIT(0)
+#define PHY_PLL_READY_RX_BIT		BIT(2)
+#define PHY_PLL_READY_TX_BIT		BIT(3)
+
+#define SGMIIPHY_ADDR(off, base)	((((off) & 0x00007FF) * 2) + (base))
+
+#define MAX_LANE_NR			3
+
+/* comphy API */
+int mvebu_3700_comphy_is_pll_locked(uint8_t comphy_index, uint32_t comphy_mode);
+int mvebu_3700_comphy_power_off(uint8_t comphy_index, uint32_t comphy_mode);
+int mvebu_3700_comphy_power_on(uint8_t comphy_index, uint32_t comphy_mode);
+#endif /* PHY_COMPHY_3700_H */
diff --git a/drivers/marvell/comphy/phy-comphy-common.h b/drivers/marvell/comphy/phy-comphy-common.h
new file mode 100644
index 0000000..ba5d255
--- /dev/null
+++ b/drivers/marvell/comphy/phy-comphy-common.h
@@ -0,0 +1,167 @@
+/*
+ * Copyright (C) 2018-2021 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+/* Marvell CP110 ana A3700 common */
+
+#ifndef PHY_COMPHY_COMMON_H
+#define PHY_COMPHY_COMMON_H
+
+/* #define DEBUG_COMPHY */
+#ifdef DEBUG_COMPHY
+#define debug(format...) printf(format)
+#else
+#define debug(format, arg...)
+#endif
+
+/* A lane is described by 4 fields:
+ *  - bit 1~0 represent comphy polarity invert
+ *  - bit 7~2 represent comphy speed
+ *  - bit 11~8 represent unit index
+ *  - bit 16~12 represent mode
+ *  - bit 17 represent comphy indication of clock source
+ *  - bit 20~18 represents pcie width (in case of pcie comphy config.)
+ *  - bit 21 represents the source of the request (Linux/Bootloader),
+ *           (reguired only for PCIe!)
+ *  - bit 31~22 reserved
+ */
+
+#define COMPHY_INVERT_OFFSET	0
+#define COMPHY_INVERT_LEN	2
+#define COMPHY_INVERT_MASK	COMPHY_MASK(COMPHY_INVERT_OFFSET, \
+						COMPHY_INVERT_LEN)
+#define COMPHY_SPEED_OFFSET	(COMPHY_INVERT_OFFSET + COMPHY_INVERT_LEN)
+#define COMPHY_SPEED_LEN	6
+#define COMPHY_SPEED_MASK	COMPHY_MASK(COMPHY_SPEED_OFFSET, \
+						COMPHY_SPEED_LEN)
+#define COMPHY_UNIT_ID_OFFSET	(COMPHY_SPEED_OFFSET + COMPHY_SPEED_LEN)
+#define COMPHY_UNIT_ID_LEN	4
+#define COMPHY_UNIT_ID_MASK	COMPHY_MASK(COMPHY_UNIT_ID_OFFSET, \
+						COMPHY_UNIT_ID_LEN)
+#define COMPHY_MODE_OFFSET	(COMPHY_UNIT_ID_OFFSET + COMPHY_UNIT_ID_LEN)
+#define COMPHY_MODE_LEN		5
+#define COMPHY_MODE_MASK	COMPHY_MASK(COMPHY_MODE_OFFSET, COMPHY_MODE_LEN)
+#define COMPHY_CLK_SRC_OFFSET	(COMPHY_MODE_OFFSET + COMPHY_MODE_LEN)
+#define COMPHY_CLK_SRC_LEN	1
+#define COMPHY_CLK_SRC_MASK	COMPHY_MASK(COMPHY_CLK_SRC_OFFSET, \
+						COMPHY_CLK_SRC_LEN)
+#define COMPHY_PCI_WIDTH_OFFSET	(COMPHY_CLK_SRC_OFFSET + COMPHY_CLK_SRC_LEN)
+#define COMPHY_PCI_WIDTH_LEN	3
+#define COMPHY_PCI_WIDTH_MASK	COMPHY_MASK(COMPHY_PCI_WIDTH_OFFSET, \
+						COMPHY_PCI_WIDTH_LEN)
+#define COMPHY_PCI_CALLER_OFFSET \
+			(COMPHY_PCI_WIDTH_OFFSET + COMPHY_PCI_WIDTH_LEN)
+#define COMPHY_PCI_CALLER_LEN	1
+#define COMPHY_PCI_CALLER_MASK	COMPHY_MASK(COMPHY_PCI_CALLER_OFFSET, \
+						COMPHY_PCI_CALLER_LEN)
+
+#define COMPHY_MASK(offset, len)	(((1 << (len)) - 1) << (offset))
+
+/* Macro which extracts mode from lane description */
+#define COMPHY_GET_MODE(x)		(((x) & COMPHY_MODE_MASK) >> \
+						COMPHY_MODE_OFFSET)
+/* Macro which extracts unit index from lane description */
+#define COMPHY_GET_ID(x)		(((x) & COMPHY_UNIT_ID_MASK) >> \
+						COMPHY_UNIT_ID_OFFSET)
+/* Macro which extracts speed from lane description */
+#define COMPHY_GET_SPEED(x)		(((x) & COMPHY_SPEED_MASK) >> \
+						COMPHY_SPEED_OFFSET)
+/* Macro which extracts clock source indication from lane description */
+#define COMPHY_GET_CLK_SRC(x)		(((x) & COMPHY_CLK_SRC_MASK) >> \
+						COMPHY_CLK_SRC_OFFSET)
+/* Macro which extracts pcie width indication from lane description */
+#define COMPHY_GET_PCIE_WIDTH(x)	(((x) & COMPHY_PCI_WIDTH_MASK) >> \
+						COMPHY_PCI_WIDTH_OFFSET)
+
+/* Macro which extracts the caller for pcie power on from lane description */
+#define COMPHY_GET_CALLER(x)		(((x) & COMPHY_PCI_CALLER_MASK) >> \
+						COMPHY_PCI_CALLER_OFFSET)
+
+/* Macro which extracts the polarity invert from lane description */
+#define COMPHY_GET_POLARITY_INVERT(x)	(((x) & COMPHY_INVERT_MASK) >> \
+						COMPHY_INVERT_OFFSET)
+
+
+#define COMPHY_SATA_MODE	0x1
+#define COMPHY_SGMII_MODE	0x2	/* SGMII 1G */
+#define COMPHY_2500BASEX_MODE	0x3	/* 2500Base-X */
+#define COMPHY_USB3H_MODE	0x4
+#define COMPHY_USB3D_MODE	0x5
+#define COMPHY_PCIE_MODE	0x6
+#define COMPHY_RXAUI_MODE	0x7
+#define COMPHY_XFI_MODE		0x8
+#define COMPHY_SFI_MODE		0x9
+#define COMPHY_USB3_MODE	0xa
+#define COMPHY_AP_MODE		0xb
+
+#define	COMPHY_UNUSED		0xFFFFFFFF
+
+/* Polarity invert macro */
+#define COMPHY_POLARITY_NO_INVERT	0
+#define COMPHY_POLARITY_TXD_INVERT	1
+#define COMPHY_POLARITY_RXD_INVERT	2
+#define COMPHY_POLARITY_ALL_INVERT	(COMPHY_POLARITY_TXD_INVERT | \
+					 COMPHY_POLARITY_RXD_INVERT)
+
+enum reg_width_type {
+	REG_16BIT = 0,
+	REG_32BIT,
+};
+
+enum {
+	COMPHY_LANE0 = 0,
+	COMPHY_LANE1,
+	COMPHY_LANE2,
+	COMPHY_LANE3,
+	COMPHY_LANE4,
+	COMPHY_LANE5,
+	COMPHY_LANE_MAX,
+};
+
+static inline uint32_t polling_with_timeout(uintptr_t addr, uint32_t val,
+					    uint32_t mask,
+					    uint32_t usec_timeout,
+					    enum reg_width_type type)
+{
+	uint32_t data;
+
+	do {
+		udelay(1);
+		if (type == REG_16BIT)
+			data = mmio_read_16(addr) & mask;
+		else
+			data = mmio_read_32(addr) & mask;
+	} while (data != val  && --usec_timeout > 0);
+
+	if (usec_timeout == 0)
+		return data;
+
+	return 0;
+}
+
+static inline void reg_set(uintptr_t addr, uint32_t data, uint32_t mask)
+{
+	debug("<atf>: WR to addr = 0x%lx, data = 0x%x (mask = 0x%x) - ",
+	      addr, data, mask);
+	debug("old value = 0x%x ==> ", mmio_read_32(addr));
+	mmio_clrsetbits_32(addr, mask, data & mask);
+
+	debug("new val 0x%x\n", mmio_read_32(addr));
+}
+
+static inline void __unused reg_set16(uintptr_t addr, uint16_t data,
+				      uint16_t mask)
+{
+
+	debug("<atf>: WR to addr = 0x%lx, data = 0x%x (mask = 0x%x) - ",
+	      addr, data, mask);
+	debug("old value = 0x%x ==> ", mmio_read_16(addr));
+	mmio_clrsetbits_16(addr, mask, data & mask);
+
+	debug("new val 0x%x\n", mmio_read_16(addr));
+}
+
+#endif /* PHY_COMPHY_COMMON_H */
diff --git a/drivers/marvell/comphy/phy-comphy-cp110.c b/drivers/marvell/comphy/phy-comphy-cp110.c
new file mode 100644
index 0000000..e256fa7
--- /dev/null
+++ b/drivers/marvell/comphy/phy-comphy-cp110.c
@@ -0,0 +1,2528 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+/* Marvell CP110 SoC COMPHY unit driver */
+
+#include <errno.h>
+#include <inttypes.h>
+#include <stdint.h>
+
+#include <common/debug.h>
+#include <drivers/delay_timer.h>
+#include <mg_conf_cm3/mg_conf_cm3.h>
+#include <lib/mmio.h>
+#include <lib/spinlock.h>
+
+#include <mvebu_def.h>
+#include "mvebu.h"
+#include "comphy-cp110.h"
+#include "phy-comphy-cp110.h"
+#include "phy-comphy-common.h"
+
+#if __has_include("phy-porting-layer.h")
+#include "phy-porting-layer.h"
+#else
+#include "phy-default-porting-layer.h"
+#endif
+
+/* COMPHY speed macro */
+#define COMPHY_SPEED_1_25G		0 /* SGMII 1G */
+#define COMPHY_SPEED_2_5G		1
+#define COMPHY_SPEED_3_125G		2 /* 2500Base-X */
+#define COMPHY_SPEED_5G			3
+#define COMPHY_SPEED_5_15625G		4 /* XFI 5G */
+#define COMPHY_SPEED_6G			5
+#define COMPHY_SPEED_10_3125G		6 /* XFI 10G */
+#define COMPHY_SPEED_MAX		0x3F
+/* The  default speed for IO with fixed known speed */
+#define COMPHY_SPEED_DEFAULT		COMPHY_SPEED_MAX
+
+/* Commands for comphy driver */
+#define COMPHY_COMMAND_DIGITAL_PWR_OFF		0x00000001
+#define COMPHY_COMMAND_DIGITAL_PWR_ON		0x00000002
+
+#define COMPHY_PIPE_FROM_COMPHY_ADDR(x)	((x & ~0xffffff) + 0x120000)
+
+/* System controller registers */
+#define PCIE_MAC_RESET_MASK_PORT0	BIT(13)
+#define PCIE_MAC_RESET_MASK_PORT1	BIT(11)
+#define PCIE_MAC_RESET_MASK_PORT2	BIT(12)
+#define SYS_CTRL_UINIT_SOFT_RESET_REG	0x268
+#define SYS_CTRL_FROM_COMPHY_ADDR(x)	((x & ~0xffffff) + 0x440000)
+
+/* DFX register spaces */
+#define SAR_RST_PCIE0_CLOCK_CONFIG_CP0_OFFSET	(30)
+#define SAR_RST_PCIE0_CLOCK_CONFIG_CP0_MASK	(0x1UL << \
+					SAR_RST_PCIE0_CLOCK_CONFIG_CP0_OFFSET)
+#define SAR_RST_PCIE1_CLOCK_CONFIG_CP0_OFFSET	(31)
+#define SAR_RST_PCIE1_CLOCK_CONFIG_CP0_MASK	(0x1UL << \
+					SAR_RST_PCIE1_CLOCK_CONFIG_CP0_OFFSET)
+#define SAR_STATUS_0_REG			0x40600
+#define DFX_FROM_COMPHY_ADDR(x)			((x & ~0xffffff) + DFX_BASE)
+/* Common Phy training  */
+#define COMPHY_TRX_TRAIN_COMPHY_OFFS		0x1000
+#define COMPHY_TRX_TRAIN_RX_TRAIN_ENABLE	0x1
+#define COMPHY_TRX_RELATIVE_ADDR(comphy_index)	(comphy_train_base + \
+			(comphy_index) * COMPHY_TRX_TRAIN_COMPHY_OFFS)
+
+/* The same Units Soft Reset Config register are accessed in all PCIe ports
+ * initialization, so a spin lock is defined in case when more than 1 CPUs
+ * resets PCIe MAC and need to access the register in the same time. The spin
+ * lock is shared by all CP110 units.
+ */
+spinlock_t cp110_mac_reset_lock;
+
+/* These values come from the PCI Express Spec */
+enum pcie_link_width {
+	PCIE_LNK_WIDTH_RESRV	= 0x00,
+	PCIE_LNK_X1		= 0x01,
+	PCIE_LNK_X2		= 0x02,
+	PCIE_LNK_X4		= 0x04,
+	PCIE_LNK_X8		= 0x08,
+	PCIE_LNK_X12		= 0x0C,
+	PCIE_LNK_X16		= 0x10,
+	PCIE_LNK_X32		= 0x20,
+	PCIE_LNK_WIDTH_UNKNOWN  = 0xFF,
+};
+
+_Bool rx_trainng_done[AP_NUM][CP_NUM][MAX_LANE_NR] = {0};
+
+static void mvebu_cp110_get_ap_and_cp_nr(uint8_t *ap_nr, uint8_t *cp_nr,
+					 uint64_t comphy_base)
+{
+#if (AP_NUM == 1)
+	*ap_nr = 0;
+#else
+	*ap_nr = (((comphy_base & ~0xffffff) - MVEBU_AP_IO_BASE(0)) /
+			 AP_IO_OFFSET);
+#endif
+
+	*cp_nr = (((comphy_base & ~0xffffff) - MVEBU_AP_IO_BASE(*ap_nr)) /
+		 MVEBU_CP_OFFSET);
+
+	debug("cp_base 0x%" PRIx64 ", ap_io_base 0x%lx, cp_offset 0x%lx\n",
+	       comphy_base, (unsigned long)MVEBU_AP_IO_BASE(*ap_nr),
+	       (unsigned long)MVEBU_CP_OFFSET);
+}
+
+/* Clear PIPE selector - avoid collision with previous configuration */
+static void mvebu_cp110_comphy_clr_pipe_selector(uint64_t comphy_base,
+						 uint8_t comphy_index)
+{
+	uint32_t reg, mask, field;
+	uint32_t comphy_offset =
+			COMMON_SELECTOR_COMPHYN_FIELD_WIDTH * comphy_index;
+
+	mask = COMMON_SELECTOR_COMPHY_MASK << comphy_offset;
+	reg = mmio_read_32(comphy_base + COMMON_SELECTOR_PIPE_REG_OFFSET);
+	field = reg & mask;
+
+	if (field) {
+		reg &= ~mask;
+		mmio_write_32(comphy_base + COMMON_SELECTOR_PIPE_REG_OFFSET,
+			     reg);
+	}
+}
+
+/* Clear PHY selector - avoid collision with previous configuration */
+static void mvebu_cp110_comphy_clr_phy_selector(uint64_t comphy_base,
+						uint8_t comphy_index)
+{
+	uint32_t reg, mask, field;
+	uint32_t comphy_offset =
+			COMMON_SELECTOR_COMPHYN_FIELD_WIDTH * comphy_index;
+
+	mask = COMMON_SELECTOR_COMPHY_MASK << comphy_offset;
+	reg = mmio_read_32(comphy_base + COMMON_SELECTOR_PHY_REG_OFFSET);
+	field = reg & mask;
+
+	/* Clear comphy selector - if it was already configured.
+	 * (might be that this comphy was configured as PCIe/USB,
+	 * in such case, no need to clear comphy selector because PCIe/USB
+	 * are controlled by hpipe selector).
+	 */
+	if (field) {
+		reg &= ~mask;
+		mmio_write_32(comphy_base + COMMON_SELECTOR_PHY_REG_OFFSET,
+			      reg);
+	}
+}
+
+/* PHY selector configures SATA and Network modes */
+static void mvebu_cp110_comphy_set_phy_selector(uint64_t comphy_base,
+				     uint8_t comphy_index, uint32_t comphy_mode)
+{
+	uint32_t reg, mask;
+	uint32_t comphy_offset =
+			COMMON_SELECTOR_COMPHYN_FIELD_WIDTH * comphy_index;
+	int mode;
+
+	/* If phy selector is used the pipe selector should be marked as
+	 * unconnected.
+	 */
+	mvebu_cp110_comphy_clr_pipe_selector(comphy_base, comphy_index);
+
+	/* Comphy mode (compound of the IO mode and id). Here, only the IO mode
+	 * is required to distinguish between SATA and network modes.
+	 */
+	mode = COMPHY_GET_MODE(comphy_mode);
+
+	mask = COMMON_SELECTOR_COMPHY_MASK << comphy_offset;
+	reg = mmio_read_32(comphy_base + COMMON_SELECTOR_PHY_REG_OFFSET);
+	reg &= ~mask;
+
+	/* SATA port 0/1 require the same configuration */
+	if (mode == COMPHY_SATA_MODE) {
+		/* SATA selector values is always 4 */
+		reg |= COMMON_SELECTOR_COMPHYN_SATA << comphy_offset;
+	} else {
+		switch (comphy_index) {
+		case(0):
+		case(1):
+		case(2):
+			/* For comphy 0,1, and 2:
+			 * Network selector value is always 1.
+			 */
+			reg |= COMMON_SELECTOR_COMPHY0_1_2_NETWORK <<
+				comphy_offset;
+			break;
+		case(3):
+			/* For comphy 3:
+			 * 0x1 = RXAUI_Lane1
+			 * 0x2 = SGMII/Base-X Port1
+			 */
+			if (mode == COMPHY_RXAUI_MODE)
+				reg |= COMMON_SELECTOR_COMPHY3_RXAUI <<
+					comphy_offset;
+			else
+				reg |= COMMON_SELECTOR_COMPHY3_SGMII <<
+					comphy_offset;
+			break;
+		case(4):
+			 /* For comphy 4:
+			  * 0x1 = SGMII/Base-X Port1, XFI1/SFI1
+			  * 0x2 = SGMII/Base-X Port0: XFI0/SFI0, RXAUI_Lane0
+			  *
+			  * We want to check if SGMII1 is the
+			  * requested mode in order to determine which value
+			  * should be set (all other modes use the same value)
+			  * so we need to strip the mode, and check the ID
+			  * because we might handle SGMII0 too.
+			  */
+			  /* TODO: need to distinguish between CP110 and CP115
+			   * as SFI1/XFI1 available only for CP115.
+			   */
+			if ((mode == COMPHY_SGMII_MODE ||
+			     mode == COMPHY_2500BASEX_MODE ||
+			     mode == COMPHY_SFI_MODE ||
+			     mode == COMPHY_XFI_MODE ||
+			     mode == COMPHY_AP_MODE)
+			    && COMPHY_GET_ID(comphy_mode) == 1)
+				reg |= COMMON_SELECTOR_COMPHY4_PORT1 <<
+					comphy_offset;
+			else
+				reg |= COMMON_SELECTOR_COMPHY4_ALL_OTHERS <<
+					comphy_offset;
+			break;
+		case(5):
+			/* For comphy 5:
+			 * 0x1 = SGMII/Base-X Port2
+			 * 0x2 = RXAUI Lane1
+			 */
+			if (mode == COMPHY_RXAUI_MODE)
+				reg |= COMMON_SELECTOR_COMPHY5_RXAUI <<
+					comphy_offset;
+			else
+				reg |= COMMON_SELECTOR_COMPHY5_SGMII <<
+					comphy_offset;
+			break;
+		}
+	}
+
+	mmio_write_32(comphy_base + COMMON_SELECTOR_PHY_REG_OFFSET, reg);
+}
+
+/* PIPE selector configures for PCIe, USB 3.0 Host, and USB 3.0 Device mode */
+static void mvebu_cp110_comphy_set_pipe_selector(uint64_t comphy_base,
+				     uint8_t comphy_index, uint32_t comphy_mode)
+{
+	uint32_t reg;
+	uint32_t shift = COMMON_SELECTOR_COMPHYN_FIELD_WIDTH * comphy_index;
+	int mode = COMPHY_GET_MODE(comphy_mode);
+	uint32_t mask = COMMON_SELECTOR_COMPHY_MASK << shift;
+	uint32_t pipe_sel = 0x0;
+
+	/* If pipe selector is used the phy selector should be marked as
+	 * unconnected.
+	 */
+	mvebu_cp110_comphy_clr_phy_selector(comphy_base, comphy_index);
+
+	reg = mmio_read_32(comphy_base + COMMON_SELECTOR_PIPE_REG_OFFSET);
+	reg &= ~mask;
+
+	switch (mode) {
+	case (COMPHY_PCIE_MODE):
+		/* For lanes support PCIE, selector value are all same */
+		pipe_sel = COMMON_SELECTOR_PIPE_COMPHY_PCIE;
+		break;
+
+	case (COMPHY_USB3H_MODE):
+		/* Only lane 1-4 support USB host, selector value is same */
+		if (comphy_index == COMPHY_LANE0 ||
+		    comphy_index == COMPHY_LANE5)
+			ERROR("COMPHY[%d] mode[%d] is invalid\n",
+			      comphy_index, mode);
+		else
+			pipe_sel = COMMON_SELECTOR_PIPE_COMPHY_USBH;
+		break;
+
+	case (COMPHY_USB3D_MODE):
+		/* Lane 1 and 4 support USB device, selector value is same */
+		if (comphy_index == COMPHY_LANE1 ||
+		    comphy_index == COMPHY_LANE4)
+			pipe_sel = COMMON_SELECTOR_PIPE_COMPHY_USBD;
+		else
+			ERROR("COMPHY[%d] mode[%d] is invalid\n", comphy_index,
+			      mode);
+		break;
+
+	default:
+		ERROR("COMPHY[%d] mode[%d] is invalid\n", comphy_index, mode);
+		break;
+	}
+
+	mmio_write_32(comphy_base + COMMON_SELECTOR_PIPE_REG_OFFSET, reg |
+		      (pipe_sel << shift));
+}
+
+int mvebu_cp110_comphy_is_pll_locked(uint64_t comphy_base, uint8_t comphy_index)
+{
+	uintptr_t sd_ip_addr, addr;
+	uint32_t mask, data;
+	int ret = 0;
+
+	debug_enter();
+
+	sd_ip_addr = SD_ADDR(COMPHY_PIPE_FROM_COMPHY_ADDR(comphy_base),
+			     comphy_index);
+
+	addr = sd_ip_addr + SD_EXTERNAL_STATUS0_REG;
+	data = SD_EXTERNAL_STATUS0_PLL_TX_MASK &
+		SD_EXTERNAL_STATUS0_PLL_RX_MASK;
+	mask = data;
+	data = polling_with_timeout(addr, data, mask,
+				    PLL_LOCK_TIMEOUT, REG_32BIT);
+	if (data != 0) {
+		if (data & SD_EXTERNAL_STATUS0_PLL_RX_MASK)
+			ERROR("RX PLL is not locked\n");
+		if (data & SD_EXTERNAL_STATUS0_PLL_TX_MASK)
+			ERROR("TX PLL is not locked\n");
+
+		ret = -ETIMEDOUT;
+	}
+
+	debug_exit();
+
+	return ret;
+}
+
+static void mvebu_cp110_polarity_invert(uintptr_t addr, uint8_t phy_polarity_invert)
+{
+	uint32_t mask, data;
+
+	/* Set RX / TX polarity */
+	data = mask = 0x0U;
+	if ((phy_polarity_invert & COMPHY_POLARITY_TXD_INVERT) != 0) {
+		data |= (1 << HPIPE_SYNC_PATTERN_TXD_INV_OFFSET);
+		mask |= HPIPE_SYNC_PATTERN_TXD_INV_MASK;
+		debug("%s: inverting TX polarity\n", __func__);
+	}
+
+	if ((phy_polarity_invert & COMPHY_POLARITY_RXD_INVERT) != 0) {
+		data |= (1 << HPIPE_SYNC_PATTERN_RXD_INV_OFFSET);
+		mask |= HPIPE_SYNC_PATTERN_RXD_INV_MASK;
+		debug("%s: inverting RX polarity\n", __func__);
+	}
+
+	reg_set(addr, data, mask);
+}
+
+static int mvebu_cp110_comphy_sata_power_on(uint64_t comphy_base,
+				     uint8_t comphy_index, uint32_t comphy_mode)
+{
+	uintptr_t hpipe_addr, sd_ip_addr, comphy_addr;
+	uint32_t mask, data;
+	uint8_t ap_nr, cp_nr, phy_polarity_invert;
+	int ret = 0;
+
+	debug_enter();
+
+	mvebu_cp110_get_ap_and_cp_nr(&ap_nr, &cp_nr, comphy_base);
+
+	const struct sata_params *sata_static_values =
+			&sata_static_values_tab[ap_nr][cp_nr][comphy_index];
+
+	phy_polarity_invert = sata_static_values->polarity_invert;
+
+	/* configure phy selector for SATA */
+	mvebu_cp110_comphy_set_phy_selector(comphy_base,
+					    comphy_index, comphy_mode);
+
+	hpipe_addr = HPIPE_ADDR(COMPHY_PIPE_FROM_COMPHY_ADDR(comphy_base),
+				comphy_index);
+	sd_ip_addr = SD_ADDR(COMPHY_PIPE_FROM_COMPHY_ADDR(comphy_base),
+			     comphy_index);
+	comphy_addr = COMPHY_ADDR(comphy_base, comphy_index);
+
+	debug(" add hpipe 0x%lx, sd 0x%lx, comphy 0x%lx\n",
+					   hpipe_addr, sd_ip_addr, comphy_addr);
+	debug("stage: RFU configurations - hard reset comphy\n");
+	/* RFU configurations - hard reset comphy */
+	mask = COMMON_PHY_CFG1_PWR_UP_MASK;
+	data = 0x1 << COMMON_PHY_CFG1_PWR_UP_OFFSET;
+	mask |= COMMON_PHY_CFG1_PIPE_SELECT_MASK;
+	data |= 0x0 << COMMON_PHY_CFG1_PIPE_SELECT_OFFSET;
+	mask |= COMMON_PHY_CFG1_PWR_ON_RESET_MASK;
+	data |= 0x0 << COMMON_PHY_CFG1_PWR_ON_RESET_OFFSET;
+	mask |= COMMON_PHY_CFG1_CORE_RSTN_MASK;
+	data |= 0x0 << COMMON_PHY_CFG1_CORE_RSTN_OFFSET;
+	reg_set(comphy_addr + COMMON_PHY_CFG1_REG, data, mask);
+
+	/* Set select data  width 40Bit - SATA mode only */
+	reg_set(comphy_addr + COMMON_PHY_CFG6_REG,
+		0x1 << COMMON_PHY_CFG6_IF_40_SEL_OFFSET,
+		COMMON_PHY_CFG6_IF_40_SEL_MASK);
+
+	/* release from hard reset in SD external */
+	mask = SD_EXTERNAL_CONFIG1_RESET_IN_MASK;
+	data = 0x1 << SD_EXTERNAL_CONFIG1_RESET_IN_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG1_RESET_CORE_MASK;
+	data |= 0x1 << SD_EXTERNAL_CONFIG1_RESET_CORE_OFFSET;
+	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
+
+	/* Wait 1ms - until band gap and ref clock ready */
+	mdelay(1);
+
+	debug("stage: Comphy configuration\n");
+	/* Start comphy Configuration */
+	/* Set reference clock to comes from group 1 - choose 25Mhz */
+	reg_set(hpipe_addr + HPIPE_MISC_REG,
+		0x0 << HPIPE_MISC_REFCLK_SEL_OFFSET,
+		HPIPE_MISC_REFCLK_SEL_MASK);
+	/* Reference frequency select set 1 (for SATA = 25Mhz) */
+	mask = HPIPE_PWR_PLL_REF_FREQ_MASK;
+	data = 0x1 << HPIPE_PWR_PLL_REF_FREQ_OFFSET;
+	/* PHY mode select (set SATA = 0x0 */
+	mask |= HPIPE_PWR_PLL_PHY_MODE_MASK;
+	data |= 0x0 << HPIPE_PWR_PLL_PHY_MODE_OFFSET;
+	reg_set(hpipe_addr + HPIPE_PWR_PLL_REG, data, mask);
+	/* Set max PHY generation setting - 6Gbps */
+	reg_set(hpipe_addr + HPIPE_INTERFACE_REG,
+		0x2 << HPIPE_INTERFACE_GEN_MAX_OFFSET,
+		HPIPE_INTERFACE_GEN_MAX_MASK);
+	/* Set select data  width 40Bit (SEL_BITS[2:0]) */
+	reg_set(hpipe_addr + HPIPE_LOOPBACK_REG,
+		0x2 << HPIPE_LOOPBACK_SEL_OFFSET, HPIPE_LOOPBACK_SEL_MASK);
+
+	debug("stage: Analog parameters from ETP(HW)\n");
+	/* G1 settings */
+	mask = HPIPE_G1_SET_1_G1_RX_SELMUPI_MASK;
+	data = sata_static_values->g1_rx_selmupi <<
+			HPIPE_G1_SET_1_G1_RX_SELMUPI_OFFSET;
+	mask |= HPIPE_G1_SET_1_G1_RX_SELMUPF_MASK;
+	data |= sata_static_values->g1_rx_selmupf <<
+			HPIPE_G1_SET_1_G1_RX_SELMUPF_OFFSET;
+	mask |= HPIPE_G1_SET_1_G1_RX_SELMUFI_MASK;
+	data |= sata_static_values->g1_rx_selmufi <<
+			HPIPE_G1_SET_1_G1_RX_SELMUFI_OFFSET;
+	mask |= HPIPE_G1_SET_1_G1_RX_SELMUFF_MASK;
+	data |= sata_static_values->g1_rx_selmuff <<
+			HPIPE_G1_SET_1_G1_RX_SELMUFF_OFFSET;
+	mask |= HPIPE_G1_SET_1_G1_RX_DIGCK_DIV_MASK;
+	data |= 0x1 << HPIPE_G1_SET_1_G1_RX_DIGCK_DIV_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G1_SET_1_REG, data, mask);
+
+	mask = HPIPE_G1_SETTINGS_3_G1_FFE_CAP_SEL_MASK;
+	data = 0xf << HPIPE_G1_SETTINGS_3_G1_FFE_CAP_SEL_OFFSET;
+	mask |= HPIPE_G1_SETTINGS_3_G1_FFE_RES_SEL_MASK;
+	data |= 0x2 << HPIPE_G1_SETTINGS_3_G1_FFE_RES_SEL_OFFSET;
+	mask |= HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_MASK;
+	data |= 0x1 << HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_OFFSET;
+	mask |= HPIPE_G1_SETTINGS_3_G1_FFE_DEG_RES_LEVEL_MASK;
+	data |= 0x1 << HPIPE_G1_SETTINGS_3_G1_FFE_DEG_RES_LEVEL_OFFSET;
+	mask |= HPIPE_G1_SETTINGS_3_G1_FFE_LOAD_RES_LEVEL_MASK;
+	data |= 0x1 << HPIPE_G1_SETTINGS_3_G1_FFE_LOAD_RES_LEVEL_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G1_SETTINGS_3_REG, data, mask);
+
+	/* G2 settings */
+	mask = HPIPE_G2_SET_1_G2_RX_SELMUPI_MASK;
+	data = sata_static_values->g2_rx_selmupi <<
+			HPIPE_G2_SET_1_G2_RX_SELMUPI_OFFSET;
+	mask |= HPIPE_G2_SET_1_G2_RX_SELMUPF_MASK;
+	data |= sata_static_values->g2_rx_selmupf <<
+			HPIPE_G2_SET_1_G2_RX_SELMUPF_OFFSET;
+	mask |= HPIPE_G2_SET_1_G2_RX_SELMUFI_MASK;
+	data |= sata_static_values->g2_rx_selmufi <<
+			HPIPE_G2_SET_1_G2_RX_SELMUFI_OFFSET;
+	mask |= HPIPE_G2_SET_1_G2_RX_SELMUFF_MASK;
+	data |= sata_static_values->g2_rx_selmuff <<
+			HPIPE_G2_SET_1_G2_RX_SELMUFF_OFFSET;
+	mask |= HPIPE_G2_SET_1_G2_RX_DIGCK_DIV_MASK;
+	data |= 0x1 << HPIPE_G2_SET_1_G2_RX_DIGCK_DIV_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G2_SET_1_REG, data, mask);
+
+	/* G3 settings */
+	mask = HPIPE_G3_SET_1_G3_RX_SELMUPI_MASK;
+	data = sata_static_values->g3_rx_selmupi <<
+			HPIPE_G3_SET_1_G3_RX_SELMUPI_OFFSET;
+	mask |= HPIPE_G3_SET_1_G3_RX_SELMUPF_MASK;
+	data |= sata_static_values->g3_rx_selmupf <<
+			HPIPE_G3_SET_1_G3_RX_SELMUPF_OFFSET;
+	mask |= HPIPE_G3_SET_1_G3_RX_SELMUFI_MASK;
+	data |= sata_static_values->g3_rx_selmufi <<
+			HPIPE_G3_SET_1_G3_RX_SELMUFI_OFFSET;
+	mask |= HPIPE_G3_SET_1_G3_RX_SELMUFF_MASK;
+	data |= sata_static_values->g3_rx_selmuff <<
+			HPIPE_G3_SET_1_G3_RX_SELMUFF_OFFSET;
+	mask |= HPIPE_G3_SET_1_G3_RX_DFE_EN_MASK;
+	data |= 0x1 << HPIPE_G3_SET_1_G3_RX_DFE_EN_OFFSET;
+	mask |= HPIPE_G3_SET_1_G3_RX_DIGCK_DIV_MASK;
+	data |= 0x2 << HPIPE_G3_SET_1_G3_RX_DIGCK_DIV_OFFSET;
+	mask |= HPIPE_G3_SET_1_G3_SAMPLER_INPAIRX2_EN_MASK;
+	data |= 0x0 << HPIPE_G3_SET_1_G3_SAMPLER_INPAIRX2_EN_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G3_SET_1_REG, data, mask);
+
+	/* DTL Control */
+	mask = HPIPE_PWR_CTR_DTL_SQ_DET_EN_MASK;
+	data = 0x1 << HPIPE_PWR_CTR_DTL_SQ_DET_EN_OFFSET;
+	mask |= HPIPE_PWR_CTR_DTL_SQ_PLOOP_EN_MASK;
+	data |= 0x1 << HPIPE_PWR_CTR_DTL_SQ_PLOOP_EN_OFFSET;
+	mask |= HPIPE_PWR_CTR_DTL_FLOOP_EN_MASK;
+	data |= 0x1 << HPIPE_PWR_CTR_DTL_FLOOP_EN_OFFSET;
+	mask |= HPIPE_PWR_CTR_DTL_CLAMPING_SEL_MASK;
+	data |= 0x1 << HPIPE_PWR_CTR_DTL_CLAMPING_SEL_OFFSET;
+	mask |= HPIPE_PWR_CTR_DTL_INTPCLK_DIV_FORCE_MASK;
+	data |= 0x1 << HPIPE_PWR_CTR_DTL_INTPCLK_DIV_FORCE_OFFSET;
+	mask |= HPIPE_PWR_CTR_DTL_CLK_MODE_MASK;
+	data |= 0x1 << HPIPE_PWR_CTR_DTL_CLK_MODE_OFFSET;
+	mask |= HPIPE_PWR_CTR_DTL_CLK_MODE_FORCE_MASK;
+	data |= 0x1 << HPIPE_PWR_CTR_DTL_CLK_MODE_FORCE_OFFSET;
+	reg_set(hpipe_addr + HPIPE_PWR_CTR_DTL_REG, data, mask);
+
+	/* Trigger sampler enable pulse */
+	mask = HPIPE_SMAPLER_MASK;
+	data = 0x1 << HPIPE_SMAPLER_OFFSET;
+	reg_set(hpipe_addr + HPIPE_SAMPLER_N_PROC_CALIB_CTRL_REG, data, mask);
+	mask = HPIPE_SMAPLER_MASK;
+	data = 0x0 << HPIPE_SMAPLER_OFFSET;
+	reg_set(hpipe_addr + HPIPE_SAMPLER_N_PROC_CALIB_CTRL_REG, data, mask);
+
+	/* VDD Calibration Control 3 */
+	mask = HPIPE_EXT_SELLV_RXSAMPL_MASK;
+	data = 0x10 << HPIPE_EXT_SELLV_RXSAMPL_OFFSET;
+	reg_set(hpipe_addr + HPIPE_VDD_CAL_CTRL_REG, data, mask);
+
+	/* DFE Resolution Control */
+	mask = HPIPE_DFE_RES_FORCE_MASK;
+	data = 0x1 << HPIPE_DFE_RES_FORCE_OFFSET;
+	reg_set(hpipe_addr + HPIPE_DFE_REG0, data, mask);
+
+	/* DFE F3-F5 Coefficient Control */
+	mask = HPIPE_DFE_F3_F5_DFE_EN_MASK;
+	data = 0x0 << HPIPE_DFE_F3_F5_DFE_EN_OFFSET;
+	mask |= HPIPE_DFE_F3_F5_DFE_CTRL_MASK;
+	data = 0x0 << HPIPE_DFE_F3_F5_DFE_CTRL_OFFSET;
+	reg_set(hpipe_addr + HPIPE_DFE_F3_F5_REG, data, mask);
+
+	/* G3 Setting 3 */
+	mask = HPIPE_G3_FFE_CAP_SEL_MASK;
+	data = sata_static_values->g3_ffe_cap_sel <<
+			HPIPE_G3_FFE_CAP_SEL_OFFSET;
+	mask |= HPIPE_G3_FFE_RES_SEL_MASK;
+	data |= sata_static_values->g3_ffe_res_sel <<
+			HPIPE_G3_FFE_RES_SEL_OFFSET;
+	mask |= HPIPE_G3_FFE_SETTING_FORCE_MASK;
+	data |= 0x1 << HPIPE_G3_FFE_SETTING_FORCE_OFFSET;
+	mask |= HPIPE_G3_FFE_DEG_RES_LEVEL_MASK;
+	data |= 0x1 << HPIPE_G3_FFE_DEG_RES_LEVEL_OFFSET;
+	mask |= HPIPE_G3_FFE_LOAD_RES_LEVEL_MASK;
+	data |= 0x3 << HPIPE_G3_FFE_LOAD_RES_LEVEL_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G3_SETTING_3_REG, data, mask);
+
+	/* G3 Setting 4 */
+	mask = HPIPE_G3_DFE_RES_MASK;
+	data = sata_static_values->g3_dfe_res << HPIPE_G3_DFE_RES_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G3_SETTING_4_REG, data, mask);
+
+	/* Offset Phase Control */
+	mask = HPIPE_OS_PH_OFFSET_MASK;
+	data = sata_static_values->align90 << HPIPE_OS_PH_OFFSET_OFFSET;
+	mask |= HPIPE_OS_PH_OFFSET_FORCE_MASK;
+	data |= 0x1 << HPIPE_OS_PH_OFFSET_FORCE_OFFSET;
+	mask |= HPIPE_OS_PH_VALID_MASK;
+	data |= 0x0 << HPIPE_OS_PH_VALID_OFFSET;
+	reg_set(hpipe_addr + HPIPE_PHASE_CONTROL_REG, data, mask);
+	mask = HPIPE_OS_PH_VALID_MASK;
+	data = 0x1 << HPIPE_OS_PH_VALID_OFFSET;
+	reg_set(hpipe_addr + HPIPE_PHASE_CONTROL_REG, data, mask);
+	mask = HPIPE_OS_PH_VALID_MASK;
+	data = 0x0 << HPIPE_OS_PH_VALID_OFFSET;
+	reg_set(hpipe_addr + HPIPE_PHASE_CONTROL_REG, data, mask);
+
+	/* Set G1 TX amplitude and TX post emphasis value */
+	mask = HPIPE_G1_SET_0_G1_TX_AMP_MASK;
+	data = sata_static_values->g1_amp << HPIPE_G1_SET_0_G1_TX_AMP_OFFSET;
+	mask |= HPIPE_G1_SET_0_G1_TX_AMP_ADJ_MASK;
+	data |= sata_static_values->g1_tx_amp_adj <<
+			HPIPE_G1_SET_0_G1_TX_AMP_ADJ_OFFSET;
+	mask |= HPIPE_G1_SET_0_G1_TX_EMPH1_MASK;
+	data |= sata_static_values->g1_emph <<
+			HPIPE_G1_SET_0_G1_TX_EMPH1_OFFSET;
+	mask |= HPIPE_G1_SET_0_G1_TX_EMPH1_EN_MASK;
+	data |= sata_static_values->g1_emph_en <<
+			HPIPE_G1_SET_0_G1_TX_EMPH1_EN_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G1_SET_0_REG, data, mask);
+
+	/* Set G1 emph */
+	mask = HPIPE_G1_SET_2_G1_TX_EMPH0_EN_MASK;
+	data = sata_static_values->g1_tx_emph_en <<
+			HPIPE_G1_SET_2_G1_TX_EMPH0_EN_OFFSET;
+	mask |= HPIPE_G1_SET_2_G1_TX_EMPH0_MASK;
+	data |= sata_static_values->g1_tx_emph <<
+			HPIPE_G1_SET_2_G1_TX_EMPH0_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G1_SET_2_REG, data, mask);
+
+	/* Set G2 TX amplitude and TX post emphasis value */
+	mask = HPIPE_G2_SET_0_G2_TX_AMP_MASK;
+	data = sata_static_values->g2_amp << HPIPE_G2_SET_0_G2_TX_AMP_OFFSET;
+	mask |= HPIPE_G2_SET_0_G2_TX_AMP_ADJ_MASK;
+	data |= sata_static_values->g2_tx_amp_adj <<
+			HPIPE_G2_SET_0_G2_TX_AMP_ADJ_OFFSET;
+	mask |= HPIPE_G2_SET_0_G2_TX_EMPH1_MASK;
+	data |= sata_static_values->g2_emph <<
+			HPIPE_G2_SET_0_G2_TX_EMPH1_OFFSET;
+	mask |= HPIPE_G2_SET_0_G2_TX_EMPH1_EN_MASK;
+	data |= sata_static_values->g2_emph_en <<
+			HPIPE_G2_SET_0_G2_TX_EMPH1_EN_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G2_SET_0_REG, data, mask);
+
+	/* Set G2 emph */
+	mask = HPIPE_G2_SET_2_G2_TX_EMPH0_EN_MASK;
+	data = sata_static_values->g2_tx_emph_en <<
+			HPIPE_G2_SET_2_G2_TX_EMPH0_EN_OFFSET;
+	mask |= HPIPE_G2_SET_2_G2_TX_EMPH0_MASK;
+	data |= sata_static_values->g2_tx_emph <<
+			HPIPE_G2_SET_2_G2_TX_EMPH0_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G2_SET_2_REG, data, mask);
+
+	/* Set G3 TX amplitude and TX post emphasis value */
+	mask = HPIPE_G3_SET_0_G3_TX_AMP_MASK;
+	data = sata_static_values->g3_amp << HPIPE_G3_SET_0_G3_TX_AMP_OFFSET;
+	mask |= HPIPE_G3_SET_0_G3_TX_AMP_ADJ_MASK;
+	data |= sata_static_values->g3_tx_amp_adj <<
+			HPIPE_G3_SET_0_G3_TX_AMP_ADJ_OFFSET;
+	mask |= HPIPE_G3_SET_0_G3_TX_EMPH1_MASK;
+	data |= sata_static_values->g3_emph <<
+			HPIPE_G3_SET_0_G3_TX_EMPH1_OFFSET;
+	mask |= HPIPE_G3_SET_0_G3_TX_EMPH1_EN_MASK;
+	data |= sata_static_values->g3_emph_en <<
+			HPIPE_G3_SET_0_G3_TX_EMPH1_EN_OFFSET;
+	mask |= HPIPE_G3_SET_0_G3_TX_SLEW_RATE_SEL_MASK;
+	data |= 0x4 << HPIPE_G3_SET_0_G3_TX_SLEW_RATE_SEL_OFFSET;
+	mask |= HPIPE_G3_SET_0_G3_TX_SLEW_CTRL_EN_MASK;
+	data |= 0x0 << HPIPE_G3_SET_0_G3_TX_SLEW_CTRL_EN_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G3_SET_0_REG, data, mask);
+
+	/* Set G3 emph */
+	mask = HPIPE_G3_SET_2_G3_TX_EMPH0_EN_MASK;
+	data = sata_static_values->g3_tx_emph_en <<
+			HPIPE_G3_SET_2_G3_TX_EMPH0_EN_OFFSET;
+	mask |= HPIPE_G3_SET_2_G3_TX_EMPH0_MASK;
+	data |= sata_static_values->g3_tx_emph <<
+			HPIPE_G3_SET_2_G3_TX_EMPH0_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G3_SET_2_REG, data, mask);
+
+	/* SERDES External Configuration 2 register */
+	mask = SD_EXTERNAL_CONFIG2_SSC_ENABLE_MASK;
+	data = 0x1 << SD_EXTERNAL_CONFIG2_SSC_ENABLE_OFFSET;
+	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG2_REG, data, mask);
+
+	/* DFE reset sequence */
+	reg_set(hpipe_addr + HPIPE_PWR_CTR_REG,
+		0x1 << HPIPE_PWR_CTR_RST_DFE_OFFSET,
+		HPIPE_PWR_CTR_RST_DFE_MASK);
+	reg_set(hpipe_addr + HPIPE_PWR_CTR_REG,
+		0x0 << HPIPE_PWR_CTR_RST_DFE_OFFSET,
+		HPIPE_PWR_CTR_RST_DFE_MASK);
+
+	if (phy_polarity_invert != 0)
+		mvebu_cp110_polarity_invert(hpipe_addr + HPIPE_SYNC_PATTERN_REG,
+					    phy_polarity_invert);
+
+	/* SW reset for interrupt logic */
+	reg_set(hpipe_addr + HPIPE_PWR_CTR_REG,
+		0x1 << HPIPE_PWR_CTR_SFT_RST_OFFSET,
+		HPIPE_PWR_CTR_SFT_RST_MASK);
+	reg_set(hpipe_addr + HPIPE_PWR_CTR_REG,
+		0x0 << HPIPE_PWR_CTR_SFT_RST_OFFSET,
+		HPIPE_PWR_CTR_SFT_RST_MASK);
+
+	debug_exit();
+
+	return ret;
+}
+
+static int mvebu_cp110_comphy_sgmii_power_on(uint64_t comphy_base,
+				     uint8_t comphy_index, uint32_t comphy_mode)
+{
+	uintptr_t hpipe_addr, sd_ip_addr, comphy_addr, addr;
+	uint32_t mask, data, sgmii_speed = COMPHY_GET_SPEED(comphy_mode);
+	int ret = 0;
+
+	debug_enter();
+
+	hpipe_addr = HPIPE_ADDR(COMPHY_PIPE_FROM_COMPHY_ADDR(comphy_base),
+				comphy_index);
+	sd_ip_addr = SD_ADDR(COMPHY_PIPE_FROM_COMPHY_ADDR(comphy_base),
+			     comphy_index);
+	comphy_addr = COMPHY_ADDR(comphy_base, comphy_index);
+
+	/* configure phy selector for SGMII */
+	mvebu_cp110_comphy_set_phy_selector(comphy_base, comphy_index,
+					    comphy_mode);
+
+	/* Confiugre the lane */
+	debug("stage: RFU configurations - hard reset comphy\n");
+	/* RFU configurations - hard reset comphy */
+	mask = COMMON_PHY_CFG1_PWR_UP_MASK;
+	data = 0x1 << COMMON_PHY_CFG1_PWR_UP_OFFSET;
+	mask |= COMMON_PHY_CFG1_PIPE_SELECT_MASK;
+	data |= 0x0 << COMMON_PHY_CFG1_PIPE_SELECT_OFFSET;
+	reg_set(comphy_addr + COMMON_PHY_CFG1_REG, data, mask);
+
+	/* Select Baud Rate of Comphy And PD_PLL/Tx/Rx */
+	mask = SD_EXTERNAL_CONFIG0_SD_PU_PLL_MASK;
+	data = 0x0 << SD_EXTERNAL_CONFIG0_SD_PU_PLL_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG0_SD_PHY_GEN_RX_MASK;
+	mask |= SD_EXTERNAL_CONFIG0_SD_PHY_GEN_TX_MASK;
+
+	if (sgmii_speed == COMPHY_SPEED_1_25G) {
+		/* SGMII 1G, SerDes speed 1.25G */
+		data |= 0x6 << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_RX_OFFSET;
+		data |= 0x6 << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_TX_OFFSET;
+	} else if (sgmii_speed == COMPHY_SPEED_3_125G) {
+		/* 2500Base-X, SerDes speed 3.125G */
+		data |= 0x8 << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_RX_OFFSET;
+		data |= 0x8 << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_TX_OFFSET;
+	} else {
+		/* Other rates are not supported */
+		ERROR("unsupported SGMII speed on comphy%d\n", comphy_index);
+		return -EINVAL;
+	}
+
+	mask |= SD_EXTERNAL_CONFIG0_SD_PU_RX_MASK;
+	data |= 0 << SD_EXTERNAL_CONFIG0_SD_PU_RX_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG0_SD_PU_TX_MASK;
+	data |= 0 << SD_EXTERNAL_CONFIG0_SD_PU_TX_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG0_HALF_BUS_MODE_MASK;
+	data |= 1 << SD_EXTERNAL_CONFIG0_HALF_BUS_MODE_OFFSET;
+	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG0_REG, data, mask);
+
+	/* Set hard reset */
+	mask = SD_EXTERNAL_CONFIG1_RESET_IN_MASK;
+	data = 0x0 << SD_EXTERNAL_CONFIG1_RESET_IN_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG1_RESET_CORE_MASK;
+	data |= 0x0 << SD_EXTERNAL_CONFIG1_RESET_CORE_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG1_RF_RESET_IN_MASK;
+	data |= 0x0 << SD_EXTERNAL_CONFIG1_RF_RESET_IN_OFFSET;
+	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
+
+	/* Release hard reset */
+	mask = SD_EXTERNAL_CONFIG1_RESET_IN_MASK;
+	data = 0x1 << SD_EXTERNAL_CONFIG1_RESET_IN_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG1_RESET_CORE_MASK;
+	data |= 0x1 << SD_EXTERNAL_CONFIG1_RESET_CORE_OFFSET;
+	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
+
+	/* Wait 1ms - until band gap and ref clock ready */
+	mdelay(1);
+
+	/* Make sure that 40 data bits is disabled
+	 * This bit is not cleared by reset
+	 */
+	mask = COMMON_PHY_CFG6_IF_40_SEL_MASK;
+	data = 0 << COMMON_PHY_CFG6_IF_40_SEL_OFFSET;
+	reg_set(comphy_addr + COMMON_PHY_CFG6_REG, data, mask);
+
+	/* Start comphy Configuration */
+	debug("stage: Comphy configuration\n");
+	/* set reference clock */
+	mask = HPIPE_MISC_REFCLK_SEL_MASK;
+	data = 0x0 << HPIPE_MISC_REFCLK_SEL_OFFSET;
+	reg_set(hpipe_addr + HPIPE_MISC_REG, data, mask);
+	/* Power and PLL Control */
+	mask = HPIPE_PWR_PLL_REF_FREQ_MASK;
+	data = 0x1 << HPIPE_PWR_PLL_REF_FREQ_OFFSET;
+	mask |= HPIPE_PWR_PLL_PHY_MODE_MASK;
+	data |= 0x4 << HPIPE_PWR_PLL_PHY_MODE_OFFSET;
+	reg_set(hpipe_addr + HPIPE_PWR_PLL_REG, data, mask);
+	/* Loopback register */
+	mask = HPIPE_LOOPBACK_SEL_MASK;
+	data = 0x1 << HPIPE_LOOPBACK_SEL_OFFSET;
+	reg_set(hpipe_addr + HPIPE_LOOPBACK_REG, data, mask);
+	/* rx control 1 */
+	mask = HPIPE_RX_CONTROL_1_RXCLK2X_SEL_MASK;
+	data = 0x1 << HPIPE_RX_CONTROL_1_RXCLK2X_SEL_OFFSET;
+	mask |= HPIPE_RX_CONTROL_1_CLK8T_EN_MASK;
+	data |= 0x0 << HPIPE_RX_CONTROL_1_CLK8T_EN_OFFSET;
+	reg_set(hpipe_addr + HPIPE_RX_CONTROL_1_REG, data, mask);
+	/* DTL Control */
+	mask = HPIPE_PWR_CTR_DTL_FLOOP_EN_MASK;
+	data = 0x0 << HPIPE_PWR_CTR_DTL_FLOOP_EN_OFFSET;
+	reg_set(hpipe_addr + HPIPE_PWR_CTR_DTL_REG, data, mask);
+
+	/* Set analog parameters from ETP(HW) - for now use the default data */
+	debug("stage: Analog parameters from ETP(HW)\n");
+
+	reg_set(hpipe_addr + HPIPE_G1_SET_0_REG,
+		0x1 << HPIPE_G1_SET_0_G1_TX_EMPH1_OFFSET,
+		HPIPE_G1_SET_0_G1_TX_EMPH1_MASK);
+
+	debug("stage: RFU configurations- Power Up PLL,Tx,Rx\n");
+	/* SERDES External Configuration */
+	mask = SD_EXTERNAL_CONFIG0_SD_PU_PLL_MASK;
+	data = 0x1 << SD_EXTERNAL_CONFIG0_SD_PU_PLL_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG0_SD_PU_RX_MASK;
+	data |= 0x1 << SD_EXTERNAL_CONFIG0_SD_PU_RX_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG0_SD_PU_TX_MASK;
+	data |= 0x1 << SD_EXTERNAL_CONFIG0_SD_PU_TX_OFFSET;
+	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG0_REG, data, mask);
+
+	ret = mvebu_cp110_comphy_is_pll_locked(comphy_base, comphy_index);
+	if (ret)
+		return ret;
+
+	/* RX init */
+	mask = SD_EXTERNAL_CONFIG1_RX_INIT_MASK;
+	data = 0x1 << SD_EXTERNAL_CONFIG1_RX_INIT_OFFSET;
+	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
+
+	/* check that RX init done */
+	addr = sd_ip_addr + SD_EXTERNAL_STATUS0_REG;
+	data = SD_EXTERNAL_STATUS0_RX_INIT_MASK;
+	mask = data;
+	data = polling_with_timeout(addr, data, mask, 100, REG_32BIT);
+	if (data != 0) {
+		ERROR("RX init failed\n");
+		ret = -ETIMEDOUT;
+	}
+
+	debug("stage: RF Reset\n");
+	/* RF Reset */
+	mask = SD_EXTERNAL_CONFIG1_RX_INIT_MASK;
+	data = 0x0 << SD_EXTERNAL_CONFIG1_RX_INIT_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG1_RF_RESET_IN_MASK;
+	data |= 0x1 << SD_EXTERNAL_CONFIG1_RF_RESET_IN_OFFSET;
+	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
+
+	debug_exit();
+
+	return ret;
+}
+
+static int mvebu_cp110_comphy_xfi_power_on(uint64_t comphy_base,
+					   uint8_t comphy_index,
+					   uint32_t comphy_mode,
+					   uint64_t comphy_train_base)
+{
+	uintptr_t hpipe_addr, sd_ip_addr, comphy_addr, addr;
+	uint32_t mask, data, speed = COMPHY_GET_SPEED(comphy_mode);
+	int ret = 0;
+	uint8_t ap_nr, cp_nr;
+
+	debug_enter();
+	mvebu_cp110_get_ap_and_cp_nr(&ap_nr, &cp_nr, comphy_base);
+
+	if (rx_trainng_done[ap_nr][cp_nr][comphy_index]) {
+		debug("Skip %s for comphy[%d][%d][%d], due to rx training\n",
+		       __func__, ap_nr, cp_nr, comphy_index);
+		return 0;
+	}
+
+	const struct xfi_params *xfi_static_values =
+			     &xfi_static_values_tab[ap_nr][cp_nr][comphy_index];
+
+	debug("%s: the ap_nr = %d, cp_nr = %d, comphy_index %d\n",
+	      __func__, ap_nr, cp_nr, comphy_index);
+
+	debug("g1_ffe_cap_sel= 0x%x, g1_ffe_res_sel= 0x%x, g1_dfe_res= 0x%x\n",
+	      xfi_static_values->g1_ffe_cap_sel,
+	      xfi_static_values->g1_ffe_res_sel,
+	      xfi_static_values->g1_dfe_res);
+
+	if (!xfi_static_values->valid) {
+		ERROR("[ap%d][cp[%d][comphy:%d]: Has no valid static params\n",
+		      ap_nr, cp_nr, comphy_index);
+		ERROR("[ap%d][cp[%d][comphy:%d]: porting layer needs update\n",
+		      ap_nr, cp_nr, comphy_index);
+		return -EINVAL;
+	}
+
+	if ((speed != COMPHY_SPEED_5_15625G) &&
+	     (speed != COMPHY_SPEED_10_3125G) &&
+	     (speed != COMPHY_SPEED_DEFAULT)) {
+		ERROR("comphy:%d: unsupported sfi/xfi speed\n", comphy_index);
+		return -EINVAL;
+	}
+
+	hpipe_addr = HPIPE_ADDR(COMPHY_PIPE_FROM_COMPHY_ADDR(comphy_base),
+				comphy_index);
+	sd_ip_addr = SD_ADDR(COMPHY_PIPE_FROM_COMPHY_ADDR(comphy_base),
+			     comphy_index);
+	comphy_addr = COMPHY_ADDR(comphy_base, comphy_index);
+
+	/* configure phy selector for XFI/SFI */
+	mvebu_cp110_comphy_set_phy_selector(comphy_base, comphy_index,
+					    comphy_mode);
+
+	debug("stage: RFU configurations - hard reset comphy\n");
+	/* RFU configurations - hard reset comphy */
+	mask = COMMON_PHY_CFG1_PWR_UP_MASK;
+	data = 0x1 << COMMON_PHY_CFG1_PWR_UP_OFFSET;
+	mask |= COMMON_PHY_CFG1_PIPE_SELECT_MASK;
+	data |= 0x0 << COMMON_PHY_CFG1_PIPE_SELECT_OFFSET;
+	reg_set(comphy_addr + COMMON_PHY_CFG1_REG, data, mask);
+
+	/* Make sure that 40 data bits is disabled
+	 * This bit is not cleared by reset
+	 */
+	mask = COMMON_PHY_CFG6_IF_40_SEL_MASK;
+	data = 0 << COMMON_PHY_CFG6_IF_40_SEL_OFFSET;
+	reg_set(comphy_addr + COMMON_PHY_CFG6_REG, data, mask);
+
+	/* Select Baud Rate of Comphy And PD_PLL/Tx/Rx */
+	mask = SD_EXTERNAL_CONFIG0_SD_PU_PLL_MASK;
+	data = 0x0 << SD_EXTERNAL_CONFIG0_SD_PU_PLL_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG0_SD_PHY_GEN_RX_MASK;
+	data |= 0xE << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_RX_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG0_SD_PHY_GEN_TX_MASK;
+	data |= 0xE << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_TX_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG0_SD_PU_RX_MASK;
+	data |= 0 << SD_EXTERNAL_CONFIG0_SD_PU_RX_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG0_SD_PU_TX_MASK;
+	data |= 0 << SD_EXTERNAL_CONFIG0_SD_PU_TX_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG0_HALF_BUS_MODE_MASK;
+	data |= 0 << SD_EXTERNAL_CONFIG0_HALF_BUS_MODE_OFFSET;
+	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG0_REG, data, mask);
+
+	/* release from hard reset */
+	mask = SD_EXTERNAL_CONFIG1_RESET_IN_MASK;
+	data = 0x0 << SD_EXTERNAL_CONFIG1_RESET_IN_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG1_RESET_CORE_MASK;
+	data |= 0x0 << SD_EXTERNAL_CONFIG1_RESET_CORE_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG1_RF_RESET_IN_MASK;
+	data |= 0x0 << SD_EXTERNAL_CONFIG1_RF_RESET_IN_OFFSET;
+	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
+
+	mask = SD_EXTERNAL_CONFIG1_RESET_IN_MASK;
+	data = 0x1 << SD_EXTERNAL_CONFIG1_RESET_IN_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG1_RESET_CORE_MASK;
+	data |= 0x1 << SD_EXTERNAL_CONFIG1_RESET_CORE_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG1_TX_IDLE_MASK;
+	data |= 0x1 << SD_EXTERNAL_CONFIG1_TX_IDLE_OFFSET;
+	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
+
+	/* Wait 1ms - until band gap and ref clock ready */
+	mdelay(1);
+
+	/*
+	 * Erratum IPCE_COMPHY-1353: toggle TX_IDLE bit in
+	 * addition to the PHY reset
+	 */
+	mask = SD_EXTERNAL_CONFIG1_TX_IDLE_MASK;
+	data = 0x0U;
+	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
+
+	/* Start comphy Configuration */
+	debug("stage: Comphy configuration\n");
+	/* set reference clock */
+	mask = HPIPE_MISC_ICP_FORCE_MASK;
+	data = (speed == COMPHY_SPEED_5_15625G) ?
+		(0x0 << HPIPE_MISC_ICP_FORCE_OFFSET) :
+		(0x1 << HPIPE_MISC_ICP_FORCE_OFFSET);
+	mask |= HPIPE_MISC_REFCLK_SEL_MASK;
+	data |= 0x0 << HPIPE_MISC_REFCLK_SEL_OFFSET;
+	reg_set(hpipe_addr + HPIPE_MISC_REG, data, mask);
+	/* Power and PLL Control */
+	mask = HPIPE_PWR_PLL_REF_FREQ_MASK;
+	data = 0x1 << HPIPE_PWR_PLL_REF_FREQ_OFFSET;
+	mask |= HPIPE_PWR_PLL_PHY_MODE_MASK;
+	data |= 0x4 << HPIPE_PWR_PLL_PHY_MODE_OFFSET;
+	reg_set(hpipe_addr + HPIPE_PWR_PLL_REG, data, mask);
+	/* Loopback register */
+	mask = HPIPE_LOOPBACK_SEL_MASK;
+	data = 0x1 << HPIPE_LOOPBACK_SEL_OFFSET;
+	reg_set(hpipe_addr + HPIPE_LOOPBACK_REG, data, mask);
+	/* rx control 1 */
+	mask = HPIPE_RX_CONTROL_1_RXCLK2X_SEL_MASK;
+	data = 0x1 << HPIPE_RX_CONTROL_1_RXCLK2X_SEL_OFFSET;
+	mask |= HPIPE_RX_CONTROL_1_CLK8T_EN_MASK;
+	data |= 0x1 << HPIPE_RX_CONTROL_1_CLK8T_EN_OFFSET;
+	reg_set(hpipe_addr + HPIPE_RX_CONTROL_1_REG, data, mask);
+	/* DTL Control */
+	mask = HPIPE_PWR_CTR_DTL_FLOOP_EN_MASK;
+	data = 0x1 << HPIPE_PWR_CTR_DTL_FLOOP_EN_OFFSET;
+	reg_set(hpipe_addr + HPIPE_PWR_CTR_DTL_REG, data, mask);
+
+	/* Transmitter/Receiver Speed Divider Force */
+	if (speed == COMPHY_SPEED_5_15625G) {
+		mask = HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_MASK;
+		data = 1 << HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_OFFSET;
+		mask |= HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_FORCE_MASK;
+		data |= 1 << HPIPE_SPD_DIV_FORCE_RX_SPD_DIV_FORCE_OFFSET;
+		mask |= HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_MASK;
+		data |= 1 << HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_OFFSET;
+		mask |= HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_FORCE_MASK;
+		data |= 1 << HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_FORCE_OFFSET;
+	} else {
+		mask = HPIPE_TXDIGCK_DIV_FORCE_MASK;
+		data = 0x1 << HPIPE_TXDIGCK_DIV_FORCE_OFFSET;
+	}
+	reg_set(hpipe_addr + HPIPE_SPD_DIV_FORCE_REG, data, mask);
+
+	/* Set analog parameters from ETP(HW) */
+	debug("stage: Analog parameters from ETP(HW)\n");
+	/* SERDES External Configuration 2 */
+	mask = SD_EXTERNAL_CONFIG2_PIN_DFE_EN_MASK;
+	data = 0x1 << SD_EXTERNAL_CONFIG2_PIN_DFE_EN_OFFSET;
+	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG2_REG, data, mask);
+	/* 0x7-DFE Resolution control */
+	mask = HPIPE_DFE_RES_FORCE_MASK;
+	data = 0x1 << HPIPE_DFE_RES_FORCE_OFFSET;
+	reg_set(hpipe_addr + HPIPE_DFE_REG0, data, mask);
+	/* 0xd-G1_Setting_0 */
+	if (speed == COMPHY_SPEED_5_15625G) {
+		mask = HPIPE_G1_SET_0_G1_TX_EMPH1_MASK;
+		data = 0x6 << HPIPE_G1_SET_0_G1_TX_EMPH1_OFFSET;
+	} else {
+		mask = HPIPE_G1_SET_0_G1_TX_AMP_MASK;
+		data = xfi_static_values->g1_amp <<
+				HPIPE_G1_SET_0_G1_TX_AMP_OFFSET;
+		mask |= HPIPE_G1_SET_0_G1_TX_EMPH1_MASK;
+		data |= xfi_static_values->g1_emph <<
+				HPIPE_G1_SET_0_G1_TX_EMPH1_OFFSET;
+
+		mask |= HPIPE_G1_SET_0_G1_TX_EMPH1_EN_MASK;
+		data |= xfi_static_values->g1_emph_en <<
+				HPIPE_G1_SET_0_G1_TX_EMPH1_EN_OFFSET;
+		mask |= HPIPE_G1_SET_0_G1_TX_AMP_ADJ_MASK;
+		data |= xfi_static_values->g1_tx_amp_adj <<
+				HPIPE_G1_SET_0_G1_TX_AMP_ADJ_OFFSET;
+	}
+	reg_set(hpipe_addr + HPIPE_G1_SET_0_REG, data, mask);
+	/* Genration 1 setting 2 (G1_Setting_2) */
+	mask = HPIPE_G1_SET_2_G1_TX_EMPH0_MASK;
+	data = xfi_static_values->g1_tx_emph <<
+				HPIPE_G1_SET_2_G1_TX_EMPH0_OFFSET;
+	mask |= HPIPE_G1_SET_2_G1_TX_EMPH0_EN_MASK;
+	data |= xfi_static_values->g1_tx_emph_en <<
+				HPIPE_G1_SET_2_G1_TX_EMPH0_EN_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G1_SET_2_REG, data, mask);
+	/* Transmitter Slew Rate Control register (tx_reg1) */
+	mask = HPIPE_TX_REG1_TX_EMPH_RES_MASK;
+	data = 0x3 << HPIPE_TX_REG1_TX_EMPH_RES_OFFSET;
+	mask |= HPIPE_TX_REG1_SLC_EN_MASK;
+	data |= 0x3f << HPIPE_TX_REG1_SLC_EN_OFFSET;
+	reg_set(hpipe_addr + HPIPE_TX_REG1_REG, data, mask);
+	/* Impedance Calibration Control register (cal_reg1) */
+	mask = HPIPE_CAL_REG_1_EXT_TXIMP_MASK;
+	data = 0xe << HPIPE_CAL_REG_1_EXT_TXIMP_OFFSET;
+	mask |= HPIPE_CAL_REG_1_EXT_TXIMP_EN_MASK;
+	data |= 0x1 << HPIPE_CAL_REG_1_EXT_TXIMP_EN_OFFSET;
+	reg_set(hpipe_addr + HPIPE_CAL_REG1_REG, data, mask);
+	/* Generation 1 Setting 5 (g1_setting_5) */
+	mask = HPIPE_G1_SETTING_5_G1_ICP_MASK;
+	data = 0 << HPIPE_CAL_REG_1_EXT_TXIMP_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G1_SETTING_5_REG, data, mask);
+
+	/* 0xE-G1_Setting_1 */
+	mask = HPIPE_G1_SET_1_G1_RX_DFE_EN_MASK;
+	data = 0x1 << HPIPE_G1_SET_1_G1_RX_DFE_EN_OFFSET;
+	if (speed == COMPHY_SPEED_5_15625G) {
+		mask |= HPIPE_G1_SET_1_G1_RX_SELMUPI_MASK;
+		data |= 0x1 << HPIPE_G1_SET_1_G1_RX_SELMUPI_OFFSET;
+		mask |= HPIPE_G1_SET_1_G1_RX_SELMUPF_MASK;
+		data |= 0x1 << HPIPE_G1_SET_1_G1_RX_SELMUPF_OFFSET;
+	} else {
+		mask |= HPIPE_G1_SET_1_G1_RX_SELMUPI_MASK;
+		data |= xfi_static_values->g1_rx_selmupi <<
+				HPIPE_G1_SET_1_G1_RX_SELMUPI_OFFSET;
+		mask |= HPIPE_G1_SET_1_G1_RX_SELMUPF_MASK;
+		data |= xfi_static_values->g1_rx_selmupf <<
+				HPIPE_G1_SET_1_G1_RX_SELMUPF_OFFSET;
+		mask |= HPIPE_G1_SET_1_G1_RX_SELMUFI_MASK;
+		data |= xfi_static_values->g1_rx_selmufi <<
+				HPIPE_G1_SET_1_G1_RX_SELMUFI_OFFSET;
+		mask |= HPIPE_G1_SET_1_G1_RX_SELMUFF_MASK;
+		data |= xfi_static_values->g1_rx_selmuff <<
+				HPIPE_G1_SET_1_G1_RX_SELMUFF_OFFSET;
+		mask |= HPIPE_G1_SET_1_G1_RX_DIGCK_DIV_MASK;
+		data |= 0x3 << HPIPE_G1_SET_1_G1_RX_DIGCK_DIV_OFFSET;
+	}
+	reg_set(hpipe_addr + HPIPE_G1_SET_1_REG, data, mask);
+
+	/* 0xA-DFE_Reg3 */
+	mask = HPIPE_DFE_F3_F5_DFE_EN_MASK;
+	data = 0x0 << HPIPE_DFE_F3_F5_DFE_EN_OFFSET;
+	mask |= HPIPE_DFE_F3_F5_DFE_CTRL_MASK;
+	data |= 0x0 << HPIPE_DFE_F3_F5_DFE_CTRL_OFFSET;
+	reg_set(hpipe_addr + HPIPE_DFE_F3_F5_REG, data, mask);
+
+	/* 0x111-G1_Setting_4 */
+	mask = HPIPE_G1_SETTINGS_4_G1_DFE_RES_MASK;
+	data = 0x1 << HPIPE_G1_SETTINGS_4_G1_DFE_RES_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G1_SETTINGS_4_REG, data, mask);
+	/* Genration 1 setting 3 (G1_Setting_3) */
+	mask = HPIPE_G1_SETTINGS_3_G1_FBCK_SEL_MASK;
+	data = 0x1 << HPIPE_G1_SETTINGS_3_G1_FBCK_SEL_OFFSET;
+	if (speed == COMPHY_SPEED_5_15625G) {
+		/* Force FFE (Feed Forward Equalization) to 5G */
+		mask |= HPIPE_G1_SETTINGS_3_G1_FFE_CAP_SEL_MASK;
+		data |= 0xf << HPIPE_G1_SETTINGS_3_G1_FFE_CAP_SEL_OFFSET;
+		mask |= HPIPE_G1_SETTINGS_3_G1_FFE_RES_SEL_MASK;
+		data |= 0x4 << HPIPE_G1_SETTINGS_3_G1_FFE_RES_SEL_OFFSET;
+		mask |= HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_MASK;
+		data |= 0x1 << HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_OFFSET;
+		reg_set(hpipe_addr + HPIPE_G1_SETTINGS_3_REG, data, mask);
+	} else {
+		mask |= HPIPE_G1_SETTINGS_3_G1_FFE_CAP_SEL_MASK;
+		data |= xfi_static_values->g1_ffe_cap_sel <<
+			HPIPE_G1_SETTINGS_3_G1_FFE_CAP_SEL_OFFSET;
+		mask |= HPIPE_G1_SETTINGS_3_G1_FFE_RES_SEL_MASK;
+		data |= xfi_static_values->g1_ffe_res_sel <<
+			HPIPE_G1_SETTINGS_3_G1_FFE_RES_SEL_OFFSET;
+		mask |= HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_MASK;
+		data |= 0x1 << HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_OFFSET;
+		reg_set(hpipe_addr + HPIPE_G1_SETTINGS_3_REG, data, mask);
+
+		/* Use the value from CAL_OS_PH_EXT */
+		mask = HPIPE_CAL_RXCLKALIGN_90_EXT_EN_MASK;
+		data = 1 << HPIPE_CAL_RXCLKALIGN_90_EXT_EN_OFFSET;
+		reg_set(hpipe_addr +
+			HPIPE_RX_CLK_ALIGN90_AND_TX_IDLE_CALIB_CTRL_REG,
+			data, mask);
+
+		/* Update align90 */
+		mask = HPIPE_CAL_OS_PH_EXT_MASK;
+		data = xfi_static_values->align90 << HPIPE_CAL_OS_PH_EXT_OFFSET;
+		reg_set(hpipe_addr +
+			HPIPE_RX_CLK_ALIGN90_AND_TX_IDLE_CALIB_CTRL_REG,
+			data, mask);
+
+		/* Force DFE resolution (use gen table value) */
+		mask = HPIPE_DFE_RES_FORCE_MASK;
+		data = 0x0 << HPIPE_DFE_RES_FORCE_OFFSET;
+		reg_set(hpipe_addr + HPIPE_DFE_REG0, data, mask);
+
+		/* 0x111-G1 DFE_Setting_4 */
+		mask = HPIPE_G1_SETTINGS_4_G1_DFE_RES_MASK;
+		data = xfi_static_values->g1_dfe_res <<
+			HPIPE_G1_SETTINGS_4_G1_DFE_RES_OFFSET;
+		reg_set(hpipe_addr + HPIPE_G1_SETTINGS_4_REG, data, mask);
+	}
+
+	/* Connfigure RX training timer */
+	mask = HPIPE_RX_TRAIN_TIMER_MASK;
+	data = 0x13 << HPIPE_RX_TRAIN_TIMER_OFFSET;
+	reg_set(hpipe_addr + HPIPE_TX_TRAIN_CTRL_5_REG, data, mask);
+
+	/* Enable TX train peak to peak hold */
+	mask = HPIPE_TX_TRAIN_P2P_HOLD_MASK;
+	data = 0x1 << HPIPE_TX_TRAIN_P2P_HOLD_OFFSET;
+	reg_set(hpipe_addr + HPIPE_TX_TRAIN_CTRL_0_REG, data, mask);
+
+	/* Configure TX preset index */
+	mask = HPIPE_TX_PRESET_INDEX_MASK;
+	data = 0x2 << HPIPE_TX_PRESET_INDEX_OFFSET;
+	reg_set(hpipe_addr + HPIPE_TX_PRESET_INDEX_REG, data, mask);
+
+	/* Disable pattern lock lost timeout */
+	mask = HPIPE_PATTERN_LOCK_LOST_TIMEOUT_EN_MASK;
+	data = 0x0 << HPIPE_PATTERN_LOCK_LOST_TIMEOUT_EN_OFFSET;
+	reg_set(hpipe_addr + HPIPE_FRAME_DETECT_CTRL_3_REG, data, mask);
+
+	/* Configure TX training pattern and TX training 16bit auto */
+	mask = HPIPE_TX_TRAIN_16BIT_AUTO_EN_MASK;
+	data = 0x1 << HPIPE_TX_TRAIN_16BIT_AUTO_EN_OFFSET;
+	mask |= HPIPE_TX_TRAIN_PAT_SEL_MASK;
+	data |= 0x1 << HPIPE_TX_TRAIN_PAT_SEL_OFFSET;
+	reg_set(hpipe_addr + HPIPE_TX_TRAIN_REG, data, mask);
+
+	/* Configure Training patten number */
+	mask = HPIPE_TRAIN_PAT_NUM_MASK;
+	data = 0x88 << HPIPE_TRAIN_PAT_NUM_OFFSET;
+	reg_set(hpipe_addr + HPIPE_FRAME_DETECT_CTRL_0_REG, data, mask);
+
+	/* Configure differencial manchester encoter to ethernet mode */
+	mask = HPIPE_DME_ETHERNET_MODE_MASK;
+	data = 0x1 << HPIPE_DME_ETHERNET_MODE_OFFSET;
+	reg_set(hpipe_addr + HPIPE_DME_REG, data, mask);
+
+	/* Configure VDD Continuous Calibration */
+	mask = HPIPE_CAL_VDD_CONT_MODE_MASK;
+	data = 0x1 << HPIPE_CAL_VDD_CONT_MODE_OFFSET;
+	reg_set(hpipe_addr + HPIPE_VDD_CAL_0_REG, data, mask);
+
+	/* Trigger sampler enable pulse (by toggleing the bit) */
+	mask = HPIPE_RX_SAMPLER_OS_GAIN_MASK;
+	data = 0x3 << HPIPE_RX_SAMPLER_OS_GAIN_OFFSET;
+	mask |= HPIPE_SMAPLER_MASK;
+	data |= 0x1 << HPIPE_SMAPLER_OFFSET;
+	reg_set(hpipe_addr + HPIPE_SAMPLER_N_PROC_CALIB_CTRL_REG, data, mask);
+	mask = HPIPE_SMAPLER_MASK;
+	data = 0x0 << HPIPE_SMAPLER_OFFSET;
+	reg_set(hpipe_addr + HPIPE_SAMPLER_N_PROC_CALIB_CTRL_REG, data, mask);
+
+	/* Set External RX Regulator Control */
+	mask = HPIPE_EXT_SELLV_RXSAMPL_MASK;
+	data = 0x1A << HPIPE_EXT_SELLV_RXSAMPL_OFFSET;
+	reg_set(hpipe_addr + HPIPE_VDD_CAL_CTRL_REG, data, mask);
+
+	debug("stage: RFU configurations- Power Up PLL,Tx,Rx\n");
+	/* SERDES External Configuration */
+	mask = SD_EXTERNAL_CONFIG0_SD_PU_PLL_MASK;
+	data = 0x1 << SD_EXTERNAL_CONFIG0_SD_PU_PLL_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG0_SD_PU_RX_MASK;
+	data |= 0x1 << SD_EXTERNAL_CONFIG0_SD_PU_RX_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG0_SD_PU_TX_MASK;
+	data |= 0x1 << SD_EXTERNAL_CONFIG0_SD_PU_TX_OFFSET;
+	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG0_REG, data, mask);
+
+	/* check PLL rx & tx ready */
+	addr = sd_ip_addr + SD_EXTERNAL_STATUS0_REG;
+	data = SD_EXTERNAL_STATUS0_PLL_RX_MASK |
+	       SD_EXTERNAL_STATUS0_PLL_TX_MASK;
+	mask = data;
+	data = polling_with_timeout(addr, data, mask,
+				    PLL_LOCK_TIMEOUT, REG_32BIT);
+	if (data != 0) {
+		if (data & SD_EXTERNAL_STATUS0_PLL_RX_MASK)
+			ERROR("RX PLL is not locked\n");
+		if (data & SD_EXTERNAL_STATUS0_PLL_TX_MASK)
+			ERROR("TX PLL is not locked\n");
+
+		ret = -ETIMEDOUT;
+	}
+
+	/* RX init */
+	mask = SD_EXTERNAL_CONFIG1_RX_INIT_MASK;
+	data = 0x1 << SD_EXTERNAL_CONFIG1_RX_INIT_OFFSET;
+	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
+
+	/* check that RX init done */
+	addr = sd_ip_addr + SD_EXTERNAL_STATUS0_REG;
+	data = SD_EXTERNAL_STATUS0_RX_INIT_MASK;
+	mask = data;
+	data = polling_with_timeout(addr, data, mask, 100, REG_32BIT);
+	if (data != 0) {
+		ERROR("RX init failed\n");
+		ret = -ETIMEDOUT;
+	}
+
+	debug("stage: RF Reset\n");
+	/* RF Reset */
+	mask =  SD_EXTERNAL_CONFIG1_RX_INIT_MASK;
+	data = 0x0 << SD_EXTERNAL_CONFIG1_RX_INIT_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG1_RF_RESET_IN_MASK;
+	data |= 0x1 << SD_EXTERNAL_CONFIG1_RF_RESET_IN_OFFSET;
+	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
+
+	/* Force rx training on 10G port */
+	data = mmio_read_32(COMPHY_TRX_RELATIVE_ADDR(comphy_index));
+	data |= COMPHY_TRX_TRAIN_RX_TRAIN_ENABLE;
+	mmio_write_32(COMPHY_TRX_RELATIVE_ADDR(comphy_index), data);
+	mdelay(200);
+	data &= ~COMPHY_TRX_TRAIN_RX_TRAIN_ENABLE;
+	mmio_write_32(COMPHY_TRX_RELATIVE_ADDR(comphy_index), data);
+
+	debug_exit();
+
+	return ret;
+}
+
+static int mvebu_cp110_comphy_pcie_power_on(uint64_t comphy_base,
+				     uint8_t comphy_index, uint32_t comphy_mode)
+{
+	int ret = 0;
+	uint32_t reg, mask, data, pcie_width;
+	uint32_t clk_dir;
+	uintptr_t hpipe_addr, comphy_addr, addr;
+	_Bool clk_src = COMPHY_GET_CLK_SRC(comphy_mode);
+	_Bool called_from_uboot = COMPHY_GET_CALLER(comphy_mode);
+
+	/* In Armada 8K DB boards, PCIe initialization can be executed
+	 * only once (PCIe reset performed during chip power on and
+	 * it cannot be executed via GPIO later).
+	 * This means that power on can be executed only once, so let's
+	 * mark if the caller is bootloader or Linux.
+	 * If bootloader -> run power on.
+	 * If Linux -> exit.
+	 *
+	 * TODO: In MacciatoBIN, PCIe reset is connected via GPIO,
+	 * so after GPIO reset is added to Linux Kernel, it can be
+	 * powered-on by Linux.
+	 */
+	if (!called_from_uboot)
+		return ret;
+
+	hpipe_addr = HPIPE_ADDR(COMPHY_PIPE_FROM_COMPHY_ADDR(comphy_base),
+				comphy_index);
+	comphy_addr = COMPHY_ADDR(comphy_base, comphy_index);
+	pcie_width = COMPHY_GET_PCIE_WIDTH(comphy_mode);
+
+	debug_enter();
+
+	spin_lock(&cp110_mac_reset_lock);
+
+	reg = mmio_read_32(SYS_CTRL_FROM_COMPHY_ADDR(comphy_base) +
+						SYS_CTRL_UINIT_SOFT_RESET_REG);
+	switch (comphy_index) {
+	case COMPHY_LANE0:
+		reg |= PCIE_MAC_RESET_MASK_PORT0;
+		break;
+	case COMPHY_LANE4:
+		reg |= PCIE_MAC_RESET_MASK_PORT1;
+		break;
+	case COMPHY_LANE5:
+		reg |= PCIE_MAC_RESET_MASK_PORT2;
+		break;
+	}
+
+	mmio_write_32(SYS_CTRL_FROM_COMPHY_ADDR(comphy_base) +
+					    SYS_CTRL_UINIT_SOFT_RESET_REG, reg);
+	spin_unlock(&cp110_mac_reset_lock);
+
+	/* Configure PIPE selector for PCIE */
+	mvebu_cp110_comphy_set_pipe_selector(comphy_base, comphy_index,
+					     comphy_mode);
+
+	/*
+	 * Read SAR (Sample-At-Reset) configuration for the PCIe clock
+	 * direction.
+	 *
+	 * SerDes Lane 4/5 got the PCIe ref-clock #1,
+	 * and SerDes Lane 0 got PCIe ref-clock #0
+	 */
+	reg = mmio_read_32(DFX_FROM_COMPHY_ADDR(comphy_base) +
+			   SAR_STATUS_0_REG);
+	if (comphy_index == COMPHY_LANE4 || comphy_index == COMPHY_LANE5)
+		clk_dir = (reg & SAR_RST_PCIE1_CLOCK_CONFIG_CP0_MASK) >>
+					  SAR_RST_PCIE1_CLOCK_CONFIG_CP0_OFFSET;
+	else
+		clk_dir = (reg & SAR_RST_PCIE0_CLOCK_CONFIG_CP0_MASK) >>
+					  SAR_RST_PCIE0_CLOCK_CONFIG_CP0_OFFSET;
+
+	debug("On lane %d\n", comphy_index);
+	debug("PCIe clock direction = %x\n", clk_dir);
+	debug("PCIe Width = %d\n", pcie_width);
+
+	/* enable PCIe X4 and X2 */
+	if (comphy_index == COMPHY_LANE0) {
+		if (pcie_width == PCIE_LNK_X4) {
+			data = 0x1 << COMMON_PHY_SD_CTRL1_PCIE_X4_EN_OFFSET;
+			mask = COMMON_PHY_SD_CTRL1_PCIE_X4_EN_MASK;
+			reg_set(comphy_base + COMMON_PHY_SD_CTRL1,
+				data, mask);
+		} else if (pcie_width == PCIE_LNK_X2) {
+			data = 0x1 << COMMON_PHY_SD_CTRL1_PCIE_X2_EN_OFFSET;
+			mask = COMMON_PHY_SD_CTRL1_PCIE_X2_EN_MASK;
+			reg_set(comphy_base + COMMON_PHY_SD_CTRL1, data, mask);
+		}
+	}
+
+	/* If PCIe clock is output and clock source from SerDes lane 5,
+	 * need to configure the clock-source MUX.
+	 * By default, the clock source is from lane 4
+	 */
+	if (clk_dir && clk_src && (comphy_index == COMPHY_LANE5)) {
+		data = DFX_DEV_GEN_PCIE_CLK_SRC_MUX <<
+						DFX_DEV_GEN_PCIE_CLK_SRC_OFFSET;
+		mask = DFX_DEV_GEN_PCIE_CLK_SRC_MASK;
+		reg_set(DFX_FROM_COMPHY_ADDR(comphy_base) +
+			DFX_DEV_GEN_CTRL12_REG, data, mask);
+	}
+
+	debug("stage: RFU configurations - hard reset comphy\n");
+	/* RFU configurations - hard reset comphy */
+	mask = COMMON_PHY_CFG1_PWR_UP_MASK;
+	data = 0x1 << COMMON_PHY_CFG1_PWR_UP_OFFSET;
+	mask |= COMMON_PHY_CFG1_PIPE_SELECT_MASK;
+	data |= 0x1 << COMMON_PHY_CFG1_PIPE_SELECT_OFFSET;
+	mask |= COMMON_PHY_CFG1_PWR_ON_RESET_MASK;
+	data |= 0x0 << COMMON_PHY_CFG1_PWR_ON_RESET_OFFSET;
+	mask |= COMMON_PHY_CFG1_CORE_RSTN_MASK;
+	data |= 0x0 << COMMON_PHY_CFG1_CORE_RSTN_OFFSET;
+	mask |= COMMON_PHY_PHY_MODE_MASK;
+	data |= 0x0 << COMMON_PHY_PHY_MODE_OFFSET;
+	reg_set(comphy_addr + COMMON_PHY_CFG1_REG, data, mask);
+
+	/* release from hard reset */
+	mask = COMMON_PHY_CFG1_PWR_ON_RESET_MASK;
+	data = 0x1 << COMMON_PHY_CFG1_PWR_ON_RESET_OFFSET;
+	mask |= COMMON_PHY_CFG1_CORE_RSTN_MASK;
+	data |= 0x1 << COMMON_PHY_CFG1_CORE_RSTN_OFFSET;
+	reg_set(comphy_addr + COMMON_PHY_CFG1_REG, data, mask);
+
+	/* Wait 1ms - until band gap and ref clock ready */
+	mdelay(1);
+	/* Start comphy Configuration */
+	debug("stage: Comphy configuration\n");
+	/* Set PIPE soft reset */
+	mask = HPIPE_RST_CLK_CTRL_PIPE_RST_MASK;
+	data = 0x1 << HPIPE_RST_CLK_CTRL_PIPE_RST_OFFSET;
+	/* Set PHY datapath width mode for V0 */
+	mask |= HPIPE_RST_CLK_CTRL_FIXED_PCLK_MASK;
+	data |= 0x1 << HPIPE_RST_CLK_CTRL_FIXED_PCLK_OFFSET;
+	/* Set Data bus width USB mode for V0 */
+	mask |= HPIPE_RST_CLK_CTRL_PIPE_WIDTH_MASK;
+	data |= 0x0 << HPIPE_RST_CLK_CTRL_PIPE_WIDTH_OFFSET;
+	/* Set CORE_CLK output frequency for 250Mhz */
+	mask |= HPIPE_RST_CLK_CTRL_CORE_FREQ_SEL_MASK;
+	data |= 0x0 << HPIPE_RST_CLK_CTRL_CORE_FREQ_SEL_OFFSET;
+	reg_set(hpipe_addr + HPIPE_RST_CLK_CTRL_REG, data, mask);
+	/* Set PLL ready delay for 0x2 */
+	data = 0x2 << HPIPE_CLK_SRC_LO_PLL_RDY_DL_OFFSET;
+	mask = HPIPE_CLK_SRC_LO_PLL_RDY_DL_MASK;
+	if (pcie_width != PCIE_LNK_X1) {
+		data |= 0x1 << HPIPE_CLK_SRC_LO_BUNDLE_PERIOD_SEL_OFFSET;
+		mask |= HPIPE_CLK_SRC_LO_BUNDLE_PERIOD_SEL_MASK;
+		data |= 0x1 << HPIPE_CLK_SRC_LO_BUNDLE_PERIOD_SCALE_OFFSET;
+		mask |= HPIPE_CLK_SRC_LO_BUNDLE_PERIOD_SCALE_MASK;
+	}
+	reg_set(hpipe_addr + HPIPE_CLK_SRC_LO_REG, data, mask);
+
+	/* Set PIPE mode interface to PCIe3 - 0x1  & set lane order */
+	data = 0x1 << HPIPE_CLK_SRC_HI_MODE_PIPE_OFFSET;
+	mask = HPIPE_CLK_SRC_HI_MODE_PIPE_MASK;
+	if (pcie_width != PCIE_LNK_X1) {
+		mask |= HPIPE_CLK_SRC_HI_LANE_STRT_MASK;
+		mask |= HPIPE_CLK_SRC_HI_LANE_MASTER_MASK;
+		mask |= HPIPE_CLK_SRC_HI_LANE_BREAK_MASK;
+		if (comphy_index == 0) {
+			data |= 0x1 << HPIPE_CLK_SRC_HI_LANE_STRT_OFFSET;
+			data |= 0x1 << HPIPE_CLK_SRC_HI_LANE_MASTER_OFFSET;
+		} else if (comphy_index == (pcie_width - 1)) {
+			data |= 0x1 << HPIPE_CLK_SRC_HI_LANE_BREAK_OFFSET;
+		}
+	}
+	reg_set(hpipe_addr + HPIPE_CLK_SRC_HI_REG, data, mask);
+	/* Config update polarity equalization */
+	data = 0x1 << HPIPE_CFG_UPDATE_POLARITY_OFFSET;
+	mask = HPIPE_CFG_UPDATE_POLARITY_MASK;
+	reg_set(hpipe_addr + HPIPE_LANE_EQ_CFG1_REG, data, mask);
+	/* Set PIPE version 4 to mode enable */
+	data = 0x1 << HPIPE_DFE_CTRL_28_PIPE4_OFFSET;
+	mask = HPIPE_DFE_CTRL_28_PIPE4_MASK;
+	reg_set(hpipe_addr + HPIPE_DFE_CTRL_28_REG, data, mask);
+	/* TODO: check if pcie clock is output/input - for bringup use input*/
+	/* Enable PIN clock 100M_125M */
+	mask = 0;
+	data = 0;
+	/* Only if clock is output, configure the clock-source mux */
+	if (clk_dir) {
+		mask |= HPIPE_MISC_CLK100M_125M_MASK;
+		data |= 0x1 << HPIPE_MISC_CLK100M_125M_OFFSET;
+	}
+	/* Set PIN_TXDCLK_2X Clock Freq. Selection for outputs 500MHz clock */
+	mask |= HPIPE_MISC_TXDCLK_2X_MASK;
+	data |= 0x0 << HPIPE_MISC_TXDCLK_2X_OFFSET;
+	/* Enable 500MHz Clock */
+	mask |= HPIPE_MISC_CLK500_EN_MASK;
+	data |= 0x1 << HPIPE_MISC_CLK500_EN_OFFSET;
+	if (clk_dir) { /* output */
+		/* Set reference clock comes from group 1 */
+		mask |= HPIPE_MISC_REFCLK_SEL_MASK;
+		data |= 0x0 << HPIPE_MISC_REFCLK_SEL_OFFSET;
+	} else {
+		/* Set reference clock comes from group 2 */
+		mask |= HPIPE_MISC_REFCLK_SEL_MASK;
+		data |= 0x1 << HPIPE_MISC_REFCLK_SEL_OFFSET;
+	}
+	mask |= HPIPE_MISC_ICP_FORCE_MASK;
+	data |= 0x1 << HPIPE_MISC_ICP_FORCE_OFFSET;
+	reg_set(hpipe_addr + HPIPE_MISC_REG, data, mask);
+	if (clk_dir) { /* output */
+		/* Set reference frequcency select - 0x2 for 25MHz*/
+		mask = HPIPE_PWR_PLL_REF_FREQ_MASK;
+		data = 0x2 << HPIPE_PWR_PLL_REF_FREQ_OFFSET;
+	} else {
+		/* Set reference frequcency select - 0x0 for 100MHz*/
+		mask = HPIPE_PWR_PLL_REF_FREQ_MASK;
+		data = 0x0 << HPIPE_PWR_PLL_REF_FREQ_OFFSET;
+	}
+	/* Set PHY mode to PCIe */
+	mask |= HPIPE_PWR_PLL_PHY_MODE_MASK;
+	data |= 0x3 << HPIPE_PWR_PLL_PHY_MODE_OFFSET;
+	reg_set(hpipe_addr + HPIPE_PWR_PLL_REG, data, mask);
+
+	/* ref clock alignment */
+	if (pcie_width != PCIE_LNK_X1) {
+		mask = HPIPE_LANE_ALIGN_OFF_MASK;
+		data = 0x0 << HPIPE_LANE_ALIGN_OFF_OFFSET;
+		reg_set(hpipe_addr + HPIPE_LANE_ALIGN_REG, data, mask);
+	}
+
+	/* Set the amount of time spent in the LoZ state - set for 0x7 only if
+	 * the PCIe clock is output
+	 */
+	if (clk_dir)
+		reg_set(hpipe_addr + HPIPE_GLOBAL_PM_CTRL,
+			0x7 << HPIPE_GLOBAL_PM_RXDLOZ_WAIT_OFFSET,
+			HPIPE_GLOBAL_PM_RXDLOZ_WAIT_MASK);
+
+	/* Set Maximal PHY Generation Setting(8Gbps) */
+	mask = HPIPE_INTERFACE_GEN_MAX_MASK;
+	data = 0x2 << HPIPE_INTERFACE_GEN_MAX_OFFSET;
+	/* Bypass frame detection and sync detection for RX DATA */
+	mask |= HPIPE_INTERFACE_DET_BYPASS_MASK;
+	data |= 0x1 << HPIPE_INTERFACE_DET_BYPASS_OFFSET;
+	/* Set Link Train Mode (Tx training control pins are used) */
+	mask |= HPIPE_INTERFACE_LINK_TRAIN_MASK;
+	data |= 0x1 << HPIPE_INTERFACE_LINK_TRAIN_OFFSET;
+	reg_set(hpipe_addr + HPIPE_INTERFACE_REG, data, mask);
+
+	/* Set Idle_sync enable */
+	mask = HPIPE_PCIE_IDLE_SYNC_MASK;
+	data = 0x1 << HPIPE_PCIE_IDLE_SYNC_OFFSET;
+	/* Select bits for PCIE Gen3(32bit) */
+	mask |= HPIPE_PCIE_SEL_BITS_MASK;
+	data |= 0x2 << HPIPE_PCIE_SEL_BITS_OFFSET;
+	reg_set(hpipe_addr + HPIPE_PCIE_REG0, data, mask);
+
+	/* Enable Tx_adapt_g1 */
+	mask = HPIPE_TX_TRAIN_CTRL_G1_MASK;
+	data = 0x1 << HPIPE_TX_TRAIN_CTRL_G1_OFFSET;
+	/* Enable Tx_adapt_gn1 */
+	mask |= HPIPE_TX_TRAIN_CTRL_GN1_MASK;
+	data |= 0x1 << HPIPE_TX_TRAIN_CTRL_GN1_OFFSET;
+	/* Disable Tx_adapt_g0 */
+	mask |= HPIPE_TX_TRAIN_CTRL_G0_MASK;
+	data |= 0x0 << HPIPE_TX_TRAIN_CTRL_G0_OFFSET;
+	reg_set(hpipe_addr + HPIPE_TX_TRAIN_CTRL_REG, data, mask);
+
+	/* Set reg_tx_train_chk_init */
+	mask = HPIPE_TX_TRAIN_CHK_INIT_MASK;
+	data = 0x0 << HPIPE_TX_TRAIN_CHK_INIT_OFFSET;
+	/* Enable TX_COE_FM_PIN_PCIE3_EN */
+	mask |= HPIPE_TX_TRAIN_COE_FM_PIN_PCIE3_MASK;
+	data |= 0x1 << HPIPE_TX_TRAIN_COE_FM_PIN_PCIE3_OFFSET;
+	reg_set(hpipe_addr + HPIPE_TX_TRAIN_REG, data, mask);
+
+	debug("stage: TRx training parameters\n");
+	/* Set Preset sweep configurations */
+	mask = HPIPE_TX_TX_STATUS_CHECK_MODE_MASK;
+	data = 0x1 << HPIPE_TX_STATUS_CHECK_MODE_OFFSET;
+	mask |= HPIPE_TX_NUM_OF_PRESET_MASK;
+	data |= 0x7 << HPIPE_TX_NUM_OF_PRESET_OFFSET;
+	mask |= HPIPE_TX_SWEEP_PRESET_EN_MASK;
+	data |= 0x1 << HPIPE_TX_SWEEP_PRESET_EN_OFFSET;
+	reg_set(hpipe_addr + HPIPE_TX_TRAIN_CTRL_11_REG, data, mask);
+
+	/* Tx train start configuration */
+	mask = HPIPE_TX_TRAIN_START_SQ_EN_MASK;
+	data = 0x1 << HPIPE_TX_TRAIN_START_SQ_EN_OFFSET;
+	mask |= HPIPE_TX_TRAIN_START_FRM_DET_EN_MASK;
+	data |= 0x0 << HPIPE_TX_TRAIN_START_FRM_DET_EN_OFFSET;
+	mask |= HPIPE_TX_TRAIN_START_FRM_LOCK_EN_MASK;
+	data |= 0x0 << HPIPE_TX_TRAIN_START_FRM_LOCK_EN_OFFSET;
+	mask |= HPIPE_TX_TRAIN_WAIT_TIME_EN_MASK;
+	data |= 0x1 << HPIPE_TX_TRAIN_WAIT_TIME_EN_OFFSET;
+	reg_set(hpipe_addr + HPIPE_TX_TRAIN_CTRL_5_REG, data, mask);
+
+	/* Enable Tx train P2P */
+	mask = HPIPE_TX_TRAIN_P2P_HOLD_MASK;
+	data = 0x1 << HPIPE_TX_TRAIN_P2P_HOLD_OFFSET;
+	reg_set(hpipe_addr + HPIPE_TX_TRAIN_CTRL_0_REG, data, mask);
+
+	/* Configure Tx train timeout */
+	mask = HPIPE_TRX_TRAIN_TIMER_MASK;
+	data = 0x17 << HPIPE_TRX_TRAIN_TIMER_OFFSET;
+	reg_set(hpipe_addr + HPIPE_TX_TRAIN_CTRL_4_REG, data, mask);
+
+	/* Disable G0/G1/GN1 adaptation */
+	mask = HPIPE_TX_TRAIN_CTRL_G1_MASK | HPIPE_TX_TRAIN_CTRL_GN1_MASK
+		| HPIPE_TX_TRAIN_CTRL_G0_OFFSET;
+	data = 0;
+	reg_set(hpipe_addr + HPIPE_TX_TRAIN_CTRL_REG, data, mask);
+
+	/* Disable DTL frequency loop */
+	mask = HPIPE_PWR_CTR_DTL_FLOOP_EN_MASK;
+	data = 0x0 << HPIPE_PWR_CTR_DTL_FLOOP_EN_OFFSET;
+	reg_set(hpipe_addr + HPIPE_PWR_CTR_DTL_REG, data, mask);
+
+	/* Configure G3 DFE */
+	mask = HPIPE_G3_DFE_RES_MASK;
+	data = 0x3 << HPIPE_G3_DFE_RES_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G3_SETTING_4_REG, data, mask);
+
+	/* Use TX/RX training result for DFE */
+	mask = HPIPE_DFE_RES_FORCE_MASK;
+	data = 0x0 << HPIPE_DFE_RES_FORCE_OFFSET;
+	reg_set(hpipe_addr + HPIPE_DFE_REG0,  data, mask);
+
+	/* Configure initial and final coefficient value for receiver */
+	mask = HPIPE_G3_SET_1_G3_RX_SELMUPI_MASK;
+	data = 0x1 << HPIPE_G3_SET_1_G3_RX_SELMUPI_OFFSET;
+
+	mask |= HPIPE_G3_SET_1_G3_RX_SELMUPF_MASK;
+	data |= 0x1 << HPIPE_G3_SET_1_G3_RX_SELMUPF_OFFSET;
+
+	mask |= HPIPE_G3_SET_1_G3_SAMPLER_INPAIRX2_EN_MASK;
+	data |= 0x0 << HPIPE_G3_SET_1_G3_SAMPLER_INPAIRX2_EN_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G3_SET_1_REG,  data, mask);
+
+	/* Trigger sampler enable pulse */
+	mask = HPIPE_SMAPLER_MASK;
+	data = 0x1 << HPIPE_SMAPLER_OFFSET;
+	reg_set(hpipe_addr + HPIPE_SAMPLER_N_PROC_CALIB_CTRL_REG, data, mask);
+	udelay(5);
+	reg_set(hpipe_addr + HPIPE_SAMPLER_N_PROC_CALIB_CTRL_REG, 0, mask);
+
+	/* FFE resistor tuning for different bandwidth  */
+	mask = HPIPE_G3_FFE_DEG_RES_LEVEL_MASK;
+	data = 0x1 << HPIPE_G3_FFE_DEG_RES_LEVEL_OFFSET;
+	mask |= HPIPE_G3_FFE_LOAD_RES_LEVEL_MASK;
+	data |= 0x3 << HPIPE_G3_FFE_LOAD_RES_LEVEL_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G3_SETTING_3_REG, data, mask);
+
+	/* Pattern lock lost timeout disable */
+	mask = HPIPE_PATTERN_LOCK_LOST_TIMEOUT_EN_MASK;
+	data = 0x0 << HPIPE_PATTERN_LOCK_LOST_TIMEOUT_EN_OFFSET;
+	reg_set(hpipe_addr + HPIPE_FRAME_DETECT_CTRL_3_REG, data, mask);
+
+	/* Configure DFE adaptations */
+	mask = HPIPE_CDR_RX_MAX_DFE_ADAPT_0_MASK;
+	data = 0x0 << HPIPE_CDR_RX_MAX_DFE_ADAPT_0_OFFSET;
+	mask |= HPIPE_CDR_RX_MAX_DFE_ADAPT_1_MASK;
+	data |= 0x0 << HPIPE_CDR_RX_MAX_DFE_ADAPT_1_OFFSET;
+	mask |= HPIPE_CDR_MAX_DFE_ADAPT_0_MASK;
+	data |= 0x0 << HPIPE_CDR_MAX_DFE_ADAPT_0_OFFSET;
+	mask |= HPIPE_CDR_MAX_DFE_ADAPT_1_MASK;
+	data |= 0x1 << HPIPE_CDR_MAX_DFE_ADAPT_1_OFFSET;
+	reg_set(hpipe_addr + HPIPE_CDR_CONTROL_REG, data, mask);
+
+	mask = HPIPE_DFE_TX_MAX_DFE_ADAPT_MASK;
+	data = 0x0 << HPIPE_DFE_TX_MAX_DFE_ADAPT_OFFSET;
+	reg_set(hpipe_addr + HPIPE_DFE_CONTROL_REG, data, mask);
+
+	/* Genration 2 setting 1*/
+	mask = HPIPE_G2_SET_1_G2_RX_SELMUPI_MASK;
+	data = 0x0 << HPIPE_G2_SET_1_G2_RX_SELMUPI_OFFSET;
+	mask |= HPIPE_G2_SET_1_G2_RX_SELMUPF_MASK;
+	data |= 0x1 << HPIPE_G2_SET_1_G2_RX_SELMUPF_OFFSET;
+	mask |= HPIPE_G2_SET_1_G2_RX_SELMUFI_MASK;
+	data |= 0x0 << HPIPE_G2_SET_1_G2_RX_SELMUFI_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G2_SET_1_REG, data, mask);
+
+	/* DFE enable */
+	mask = HPIPE_G2_DFE_RES_MASK;
+	data = 0x3 << HPIPE_G2_DFE_RES_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G2_SETTINGS_4_REG, data, mask);
+
+	/* Configure DFE Resolution */
+	mask = HPIPE_LANE_CFG4_DFE_EN_SEL_MASK;
+	data = 0x1 << HPIPE_LANE_CFG4_DFE_EN_SEL_OFFSET;
+	reg_set(hpipe_addr + HPIPE_LANE_CFG4_REG, data, mask);
+
+	/* VDD calibration control */
+	mask = HPIPE_EXT_SELLV_RXSAMPL_MASK;
+	data = 0x16 << HPIPE_EXT_SELLV_RXSAMPL_OFFSET;
+	reg_set(hpipe_addr + HPIPE_VDD_CAL_CTRL_REG, data, mask);
+
+	/* Set PLL Charge-pump Current Control */
+	mask = HPIPE_G3_SETTING_5_G3_ICP_MASK;
+	data = 0x4 << HPIPE_G3_SETTING_5_G3_ICP_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G3_SETTING_5_REG, data, mask);
+
+	/* Set lane rqualization remote setting */
+	mask = HPIPE_LANE_CFG_FOM_DIRN_OVERRIDE_MASK;
+	data = 0x1 << HPIPE_LANE_CFG_FOM_DIRN_OVERRIDE_OFFSET;
+	mask |= HPIPE_LANE_CFG_FOM_ONLY_MODE_MASK;
+	data |= 0x1 << HPIPE_LANE_CFG_FOM_ONLY_MODE_OFFFSET;
+	mask |= HPIPE_LANE_CFG_FOM_PRESET_VECTOR_MASK;
+	data |= 0x6 << HPIPE_LANE_CFG_FOM_PRESET_VECTOR_OFFSET;
+	reg_set(hpipe_addr + HPIPE_LANE_EQ_REMOTE_SETTING_REG, data, mask);
+
+	mask = HPIPE_CFG_EQ_BUNDLE_DIS_MASK;
+	data = 0x1 << HPIPE_CFG_EQ_BUNDLE_DIS_OFFSET;
+	reg_set(hpipe_addr + HPIPE_LANE_EQ_CFG2_REG, data, mask);
+
+	debug("stage: Comphy power up\n");
+
+	/* For PCIe X4 or X2:
+	 * release from reset only after finish to configure all lanes
+	 */
+	if ((pcie_width == PCIE_LNK_X1) || (comphy_index == (pcie_width - 1))) {
+		uint32_t i, start_lane, end_lane;
+
+		if (pcie_width != PCIE_LNK_X1) {
+			/* allows writing to all lanes in one write */
+			data = 0x0;
+			if (pcie_width == PCIE_LNK_X2)
+				mask = COMMON_PHY_SD_CTRL1_COMPHY_0_1_PORT_MASK;
+			else if (pcie_width == PCIE_LNK_X4)
+				mask = COMMON_PHY_SD_CTRL1_COMPHY_0_3_PORT_MASK;
+			reg_set(comphy_base + COMMON_PHY_SD_CTRL1, data, mask);
+			start_lane = 0;
+			end_lane = pcie_width;
+
+			/* Release from PIPE soft reset
+			 * For PCIe by4 or by2:
+			 * release from soft reset all lanes - can't use
+			 * read modify write
+			 */
+			reg_set(HPIPE_ADDR(
+				COMPHY_PIPE_FROM_COMPHY_ADDR(comphy_base), 0) +
+				HPIPE_RST_CLK_CTRL_REG, 0x24, 0xffffffff);
+		} else {
+			start_lane = comphy_index;
+			end_lane = comphy_index + 1;
+
+			/* Release from PIPE soft reset
+			 * for PCIe by4 or by2:
+			 * release from soft reset all lanes
+			 */
+			reg_set(hpipe_addr + HPIPE_RST_CLK_CTRL_REG,
+				0x0 << HPIPE_RST_CLK_CTRL_PIPE_RST_OFFSET,
+				HPIPE_RST_CLK_CTRL_PIPE_RST_MASK);
+		}
+
+		if (pcie_width != PCIE_LNK_X1) {
+			/* disable writing to all lanes with one write */
+			if (pcie_width == PCIE_LNK_X2) {
+				data = (COMPHY_LANE0 <<
+				COMMON_PHY_SD_CTRL1_COMPHY_0_PORT_OFFSET) |
+				(COMPHY_LANE1 <<
+				COMMON_PHY_SD_CTRL1_COMPHY_1_PORT_OFFSET);
+				mask = COMMON_PHY_SD_CTRL1_COMPHY_0_1_PORT_MASK;
+			} else if (pcie_width == PCIE_LNK_X4) {
+				data = (COMPHY_LANE0 <<
+				COMMON_PHY_SD_CTRL1_COMPHY_0_PORT_OFFSET) |
+				(COMPHY_LANE1 <<
+				COMMON_PHY_SD_CTRL1_COMPHY_1_PORT_OFFSET) |
+				(COMPHY_LANE2 <<
+				COMMON_PHY_SD_CTRL1_COMPHY_2_PORT_OFFSET) |
+				(COMPHY_LANE3 <<
+				COMMON_PHY_SD_CTRL1_COMPHY_3_PORT_OFFSET);
+				mask = COMMON_PHY_SD_CTRL1_COMPHY_0_3_PORT_MASK;
+			}
+			reg_set(comphy_base + COMMON_PHY_SD_CTRL1,
+				data, mask);
+		}
+
+		debug("stage: Check PLL\n");
+		/* Read lane status */
+		for (i = start_lane; i < end_lane; i++) {
+			addr = HPIPE_ADDR(
+				COMPHY_PIPE_FROM_COMPHY_ADDR(comphy_base), i) +
+				HPIPE_LANE_STATUS1_REG;
+			data = HPIPE_LANE_STATUS1_PCLK_EN_MASK;
+			mask = data;
+			data = polling_with_timeout(addr, data, mask,
+						   PLL_LOCK_TIMEOUT,
+						   REG_32BIT);
+			if (data) {
+				ERROR("Failed to lock PCIE PLL\n");
+				ret = -ETIMEDOUT;
+			}
+		}
+	}
+
+	debug_exit();
+
+	return ret;
+}
+
+static int mvebu_cp110_comphy_rxaui_power_on(uint64_t comphy_base,
+				     uint8_t comphy_index, uint32_t comphy_mode)
+{
+	uintptr_t hpipe_addr, sd_ip_addr, comphy_addr, addr;
+	uint32_t mask, data;
+	int ret = 0;
+
+	debug_enter();
+
+	hpipe_addr = HPIPE_ADDR(COMPHY_PIPE_FROM_COMPHY_ADDR(comphy_base),
+				comphy_index);
+	comphy_addr = COMPHY_ADDR(comphy_base, comphy_index);
+	sd_ip_addr = SD_ADDR(COMPHY_PIPE_FROM_COMPHY_ADDR(comphy_base),
+			     comphy_index);
+
+	/* configure phy selector for RXAUI */
+	mvebu_cp110_comphy_set_phy_selector(comphy_base, comphy_index,
+					    comphy_mode);
+
+	/* RFU configurations - hard reset comphy */
+	mask = COMMON_PHY_CFG1_PWR_UP_MASK;
+	data = 0x1 << COMMON_PHY_CFG1_PWR_UP_OFFSET;
+	mask |= COMMON_PHY_CFG1_PIPE_SELECT_MASK;
+	data |= 0x0 << COMMON_PHY_CFG1_PIPE_SELECT_OFFSET;
+	reg_set(comphy_addr + COMMON_PHY_CFG1_REG, data, mask);
+
+	if (comphy_index == 2) {
+		reg_set(comphy_base + COMMON_PHY_SD_CTRL1,
+			0x1 << COMMON_PHY_SD_CTRL1_RXAUI0_OFFSET,
+			COMMON_PHY_SD_CTRL1_RXAUI0_MASK);
+	}
+	if (comphy_index == 4) {
+		reg_set(comphy_base + COMMON_PHY_SD_CTRL1,
+			0x1 << COMMON_PHY_SD_CTRL1_RXAUI1_OFFSET,
+			COMMON_PHY_SD_CTRL1_RXAUI1_MASK);
+	}
+
+	/* Select Baud Rate of Comphy And PD_PLL/Tx/Rx */
+	mask = SD_EXTERNAL_CONFIG0_SD_PU_PLL_MASK;
+	data = 0x0 << SD_EXTERNAL_CONFIG0_SD_PU_PLL_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG0_SD_PHY_GEN_RX_MASK;
+	data |= 0xB << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_RX_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG0_SD_PHY_GEN_TX_MASK;
+	data |= 0xB << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_TX_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG0_SD_PU_RX_MASK;
+	data |= 0x0 << SD_EXTERNAL_CONFIG0_SD_PU_RX_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG0_SD_PU_TX_MASK;
+	data |= 0x0 << SD_EXTERNAL_CONFIG0_SD_PU_TX_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG0_HALF_BUS_MODE_MASK;
+	data |= 0x0 << SD_EXTERNAL_CONFIG0_HALF_BUS_MODE_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG0_MEDIA_MODE_MASK;
+	data |= 0x1 << SD_EXTERNAL_CONFIG0_MEDIA_MODE_OFFSET;
+	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG0_REG, data, mask);
+
+	/* release from hard reset */
+	mask = SD_EXTERNAL_CONFIG1_RESET_IN_MASK;
+	data = 0x0 << SD_EXTERNAL_CONFIG1_RESET_IN_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG1_RESET_CORE_MASK;
+	data |= 0x0 << SD_EXTERNAL_CONFIG1_RESET_CORE_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG1_RF_RESET_IN_MASK;
+	data |= 0x0 << SD_EXTERNAL_CONFIG1_RF_RESET_IN_OFFSET;
+	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
+
+	mask = SD_EXTERNAL_CONFIG1_RESET_IN_MASK;
+	data = 0x1 << SD_EXTERNAL_CONFIG1_RESET_IN_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG1_RESET_CORE_MASK;
+	data |= 0x1 << SD_EXTERNAL_CONFIG1_RESET_CORE_OFFSET;
+	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
+
+	/* Wait 1ms - until band gap and ref clock ready */
+	mdelay(1);
+
+	/* Start comphy Configuration */
+	debug("stage: Comphy configuration\n");
+	/* set reference clock */
+	reg_set(hpipe_addr + HPIPE_MISC_REG,
+		0x0 << HPIPE_MISC_REFCLK_SEL_OFFSET,
+		HPIPE_MISC_REFCLK_SEL_MASK);
+	/* Power and PLL Control */
+	mask = HPIPE_PWR_PLL_REF_FREQ_MASK;
+	data = 0x1 << HPIPE_PWR_PLL_REF_FREQ_OFFSET;
+	mask |= HPIPE_PWR_PLL_PHY_MODE_MASK;
+	data |= 0x4 << HPIPE_PWR_PLL_PHY_MODE_OFFSET;
+	reg_set(hpipe_addr + HPIPE_PWR_PLL_REG, data, mask);
+	/* Loopback register */
+	reg_set(hpipe_addr + HPIPE_LOOPBACK_REG,
+		0x1 << HPIPE_LOOPBACK_SEL_OFFSET, HPIPE_LOOPBACK_SEL_MASK);
+	/* rx control 1 */
+	mask = HPIPE_RX_CONTROL_1_RXCLK2X_SEL_MASK;
+	data = 0x1 << HPIPE_RX_CONTROL_1_RXCLK2X_SEL_OFFSET;
+	mask |= HPIPE_RX_CONTROL_1_CLK8T_EN_MASK;
+	data |= 0x1 << HPIPE_RX_CONTROL_1_CLK8T_EN_OFFSET;
+	reg_set(hpipe_addr + HPIPE_RX_CONTROL_1_REG, data, mask);
+	/* DTL Control */
+	reg_set(hpipe_addr + HPIPE_PWR_CTR_DTL_REG,
+		0x0 << HPIPE_PWR_CTR_DTL_FLOOP_EN_OFFSET,
+		HPIPE_PWR_CTR_DTL_FLOOP_EN_MASK);
+
+	/* Set analog parameters from ETP(HW) */
+	debug("stage: Analog parameters from ETP(HW)\n");
+	/* SERDES External Configuration 2 */
+	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG2_REG,
+		0x1 << SD_EXTERNAL_CONFIG2_PIN_DFE_EN_OFFSET,
+		SD_EXTERNAL_CONFIG2_PIN_DFE_EN_MASK);
+	/* 0x7-DFE Resolution control */
+	reg_set(hpipe_addr + HPIPE_DFE_REG0, 0x1 << HPIPE_DFE_RES_FORCE_OFFSET,
+		HPIPE_DFE_RES_FORCE_MASK);
+	/* 0xd-G1_Setting_0 */
+	reg_set(hpipe_addr + HPIPE_G1_SET_0_REG,
+		0xd << HPIPE_G1_SET_0_G1_TX_EMPH1_OFFSET,
+		HPIPE_G1_SET_0_G1_TX_EMPH1_MASK);
+	/* 0xE-G1_Setting_1 */
+	mask = HPIPE_G1_SET_1_G1_RX_SELMUPI_MASK;
+	data = 0x1 << HPIPE_G1_SET_1_G1_RX_SELMUPI_OFFSET;
+	mask |= HPIPE_G1_SET_1_G1_RX_SELMUPF_MASK;
+	data |= 0x1 << HPIPE_G1_SET_1_G1_RX_SELMUPF_OFFSET;
+	mask |= HPIPE_G1_SET_1_G1_RX_DFE_EN_MASK;
+	data |= 0x1 << HPIPE_G1_SET_1_G1_RX_DFE_EN_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G1_SET_1_REG, data, mask);
+	/* 0xA-DFE_Reg3 */
+	mask = HPIPE_DFE_F3_F5_DFE_EN_MASK;
+	data = 0x0 << HPIPE_DFE_F3_F5_DFE_EN_OFFSET;
+	mask |= HPIPE_DFE_F3_F5_DFE_CTRL_MASK;
+	data |= 0x0 << HPIPE_DFE_F3_F5_DFE_CTRL_OFFSET;
+	reg_set(hpipe_addr + HPIPE_DFE_F3_F5_REG, data, mask);
+
+	/* 0x111-G1_Setting_4 */
+	mask = HPIPE_G1_SETTINGS_4_G1_DFE_RES_MASK;
+	data = 0x1 << HPIPE_G1_SETTINGS_4_G1_DFE_RES_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G1_SETTINGS_4_REG, data, mask);
+
+	debug("stage: RFU configurations- Power Up PLL,Tx,Rx\n");
+	/* SERDES External Configuration */
+	mask = SD_EXTERNAL_CONFIG0_SD_PU_PLL_MASK;
+	data = 0x1 << SD_EXTERNAL_CONFIG0_SD_PU_PLL_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG0_SD_PU_RX_MASK;
+	data |= 0x1 << SD_EXTERNAL_CONFIG0_SD_PU_RX_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG0_SD_PU_TX_MASK;
+	data |= 0x1 << SD_EXTERNAL_CONFIG0_SD_PU_TX_OFFSET;
+	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG0_REG, data, mask);
+
+
+	/* check PLL rx & tx ready */
+	addr = sd_ip_addr + SD_EXTERNAL_STATUS0_REG;
+	data = SD_EXTERNAL_STATUS0_PLL_RX_MASK |
+		SD_EXTERNAL_STATUS0_PLL_TX_MASK;
+	mask = data;
+	data = polling_with_timeout(addr, data, mask, 15000, REG_32BIT);
+	if (data != 0) {
+		debug("Read from reg = %lx - value = 0x%x\n",
+		      sd_ip_addr + SD_EXTERNAL_STATUS0_REG, data);
+		ERROR("SD_EXTERNAL_STATUS0_PLL_RX is %d, -\"-_PLL_TX is %d\n",
+		      (data & SD_EXTERNAL_STATUS0_PLL_RX_MASK),
+		      (data & SD_EXTERNAL_STATUS0_PLL_TX_MASK));
+		ret = -ETIMEDOUT;
+	}
+
+	/* RX init */
+	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG,
+		0x1 << SD_EXTERNAL_CONFIG1_RX_INIT_OFFSET,
+		SD_EXTERNAL_CONFIG1_RX_INIT_MASK);
+
+	/* check that RX init done */
+	addr = sd_ip_addr + SD_EXTERNAL_STATUS0_REG;
+	data = SD_EXTERNAL_STATUS0_RX_INIT_MASK;
+	mask = data;
+	data = polling_with_timeout(addr, data, mask, 100, REG_32BIT);
+	if (data != 0) {
+		debug("Read from reg = %lx - value = 0x%x\n",
+		      sd_ip_addr + SD_EXTERNAL_STATUS0_REG, data);
+		ERROR("SD_EXTERNAL_STATUS0_RX_INIT is 0\n");
+		ret = -ETIMEDOUT;
+	}
+
+	debug("stage: RF Reset\n");
+	/* RF Reset */
+	mask =  SD_EXTERNAL_CONFIG1_RX_INIT_MASK;
+	data = 0x0 << SD_EXTERNAL_CONFIG1_RX_INIT_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG1_RF_RESET_IN_MASK;
+	data |= 0x1 << SD_EXTERNAL_CONFIG1_RF_RESET_IN_OFFSET;
+	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
+
+	debug_exit();
+
+	return ret;
+}
+
+static int mvebu_cp110_comphy_usb3_power_on(uint64_t comphy_base,
+				     uint8_t comphy_index, uint32_t comphy_mode)
+{
+	uintptr_t hpipe_addr, comphy_addr, addr;
+	uint32_t mask, data;
+	uint8_t ap_nr, cp_nr, phy_polarity_invert;
+	int ret = 0;
+
+	debug_enter();
+
+	/* Configure PIPE selector for USB3 */
+	mvebu_cp110_comphy_set_pipe_selector(comphy_base, comphy_index,
+					     comphy_mode);
+
+	mvebu_cp110_get_ap_and_cp_nr(&ap_nr, &cp_nr, comphy_base);
+
+	const struct usb_params *usb_static_values =
+			&usb_static_values_tab[ap_nr][cp_nr][comphy_index];
+
+	phy_polarity_invert = usb_static_values->polarity_invert;
+
+	hpipe_addr = HPIPE_ADDR(COMPHY_PIPE_FROM_COMPHY_ADDR(comphy_base),
+				comphy_index);
+	comphy_addr = COMPHY_ADDR(comphy_base, comphy_index);
+
+	debug("stage: RFU configurations - hard reset comphy\n");
+	/* RFU configurations - hard reset comphy */
+	mask = COMMON_PHY_CFG1_PWR_UP_MASK;
+	data = 0x1 << COMMON_PHY_CFG1_PWR_UP_OFFSET;
+	mask |= COMMON_PHY_CFG1_PIPE_SELECT_MASK;
+	data |= 0x1 << COMMON_PHY_CFG1_PIPE_SELECT_OFFSET;
+	mask |= COMMON_PHY_CFG1_PWR_ON_RESET_MASK;
+	data |= 0x0 << COMMON_PHY_CFG1_PWR_ON_RESET_OFFSET;
+	mask |= COMMON_PHY_CFG1_CORE_RSTN_MASK;
+	data |= 0x0 << COMMON_PHY_CFG1_CORE_RSTN_OFFSET;
+	mask |= COMMON_PHY_PHY_MODE_MASK;
+	data |= 0x1 << COMMON_PHY_PHY_MODE_OFFSET;
+	reg_set(comphy_addr + COMMON_PHY_CFG1_REG, data, mask);
+
+	/* release from hard reset */
+	mask = COMMON_PHY_CFG1_PWR_ON_RESET_MASK;
+	data = 0x1 << COMMON_PHY_CFG1_PWR_ON_RESET_OFFSET;
+	mask |= COMMON_PHY_CFG1_CORE_RSTN_MASK;
+	data |= 0x1 << COMMON_PHY_CFG1_CORE_RSTN_OFFSET;
+	reg_set(comphy_addr + COMMON_PHY_CFG1_REG, data, mask);
+
+	/* Wait 1ms - until band gap and ref clock ready */
+	mdelay(1);
+
+	/* Start comphy Configuration */
+	debug("stage: Comphy configuration\n");
+	/* Set PIPE soft reset */
+	mask = HPIPE_RST_CLK_CTRL_PIPE_RST_MASK;
+	data = 0x1 << HPIPE_RST_CLK_CTRL_PIPE_RST_OFFSET;
+	/* Set PHY datapath width mode for V0 */
+	mask |= HPIPE_RST_CLK_CTRL_FIXED_PCLK_MASK;
+	data |= 0x0 << HPIPE_RST_CLK_CTRL_FIXED_PCLK_OFFSET;
+	/* Set Data bus width USB mode for V0 */
+	mask |= HPIPE_RST_CLK_CTRL_PIPE_WIDTH_MASK;
+	data |= 0x0 << HPIPE_RST_CLK_CTRL_PIPE_WIDTH_OFFSET;
+	/* Set CORE_CLK output frequency for 250Mhz */
+	mask |= HPIPE_RST_CLK_CTRL_CORE_FREQ_SEL_MASK;
+	data |= 0x0 << HPIPE_RST_CLK_CTRL_CORE_FREQ_SEL_OFFSET;
+	reg_set(hpipe_addr + HPIPE_RST_CLK_CTRL_REG, data, mask);
+	/* Set PLL ready delay for 0x2 */
+	reg_set(hpipe_addr + HPIPE_CLK_SRC_LO_REG,
+		0x2 << HPIPE_CLK_SRC_LO_PLL_RDY_DL_OFFSET,
+		HPIPE_CLK_SRC_LO_PLL_RDY_DL_MASK);
+	/* Set reference clock to come from group 1 - 25Mhz */
+	reg_set(hpipe_addr + HPIPE_MISC_REG,
+		0x0 << HPIPE_MISC_REFCLK_SEL_OFFSET,
+		HPIPE_MISC_REFCLK_SEL_MASK);
+	/* Set reference frequcency select - 0x2 */
+	mask = HPIPE_PWR_PLL_REF_FREQ_MASK;
+	data = 0x2 << HPIPE_PWR_PLL_REF_FREQ_OFFSET;
+	/* Set PHY mode to USB - 0x5 */
+	mask |= HPIPE_PWR_PLL_PHY_MODE_MASK;
+	data |= 0x5 << HPIPE_PWR_PLL_PHY_MODE_OFFSET;
+	reg_set(hpipe_addr + HPIPE_PWR_PLL_REG, data, mask);
+	/* Set the amount of time spent in the LoZ state - set for 0x7 */
+	reg_set(hpipe_addr + HPIPE_GLOBAL_PM_CTRL,
+		0x7 << HPIPE_GLOBAL_PM_RXDLOZ_WAIT_OFFSET,
+		HPIPE_GLOBAL_PM_RXDLOZ_WAIT_MASK);
+	/* Set max PHY generation setting - 5Gbps */
+	reg_set(hpipe_addr + HPIPE_INTERFACE_REG,
+		0x1 << HPIPE_INTERFACE_GEN_MAX_OFFSET,
+		HPIPE_INTERFACE_GEN_MAX_MASK);
+	/* Set select data width 20Bit (SEL_BITS[2:0]) */
+	reg_set(hpipe_addr + HPIPE_LOOPBACK_REG,
+		0x1 << HPIPE_LOOPBACK_SEL_OFFSET,
+		HPIPE_LOOPBACK_SEL_MASK);
+	/* select de-emphasize 3.5db */
+	reg_set(hpipe_addr + HPIPE_LANE_CONFIG0_REG,
+		0x1 << HPIPE_LANE_CONFIG0_TXDEEMPH0_OFFSET,
+		HPIPE_LANE_CONFIG0_TXDEEMPH0_MASK);
+	/* override tx margining from the MAC */
+	reg_set(hpipe_addr + HPIPE_TST_MODE_CTRL_REG,
+		0x1 << HPIPE_TST_MODE_CTRL_MODE_MARGIN_OFFSET,
+		HPIPE_TST_MODE_CTRL_MODE_MARGIN_MASK);
+
+	/* The polarity inversion for USB was not tested due to lack of hw
+	 * design which requires it. Support is added for customer needs.
+	 */
+	if (phy_polarity_invert)
+		mvebu_cp110_polarity_invert(hpipe_addr + HPIPE_SYNC_PATTERN_REG,
+					    phy_polarity_invert);
+
+	/* Start analog parameters from ETP(HW) */
+	debug("stage: Analog parameters from ETP(HW)\n");
+	/* Set Pin DFE_PAT_DIS -> Bit[1]: PIN_DFE_PAT_DIS = 0x0 */
+	mask = HPIPE_LANE_CFG4_DFE_CTRL_MASK;
+	data = 0x1 << HPIPE_LANE_CFG4_DFE_CTRL_OFFSET;
+	/* Set Override PHY DFE control pins for 0x1 */
+	mask |= HPIPE_LANE_CFG4_DFE_OVER_MASK;
+	data |= 0x1 << HPIPE_LANE_CFG4_DFE_OVER_OFFSET;
+	/* Set Spread Spectrum Clock Enable fot 0x1 */
+	mask |= HPIPE_LANE_CFG4_SSC_CTRL_MASK;
+	data |= 0x1 << HPIPE_LANE_CFG4_SSC_CTRL_OFFSET;
+	reg_set(hpipe_addr + HPIPE_LANE_CFG4_REG, data, mask);
+	/* Configure SSC amplitude */
+	mask = HPIPE_G2_TX_SSC_AMP_MASK;
+	data = 0x1f << HPIPE_G2_TX_SSC_AMP_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G2_SET_2_REG, data, mask);
+	/* End of analog parameters */
+
+	debug("stage: Comphy power up\n");
+	/* Release from PIPE soft reset */
+	reg_set(hpipe_addr + HPIPE_RST_CLK_CTRL_REG,
+		0x0 << HPIPE_RST_CLK_CTRL_PIPE_RST_OFFSET,
+		HPIPE_RST_CLK_CTRL_PIPE_RST_MASK);
+
+	/* wait 15ms - for comphy calibration done */
+	debug("stage: Check PLL\n");
+	/* Read lane status */
+	addr = hpipe_addr + HPIPE_LANE_STATUS1_REG;
+	data = HPIPE_LANE_STATUS1_PCLK_EN_MASK;
+	mask = data;
+	data = polling_with_timeout(addr, data, mask, 15000, REG_32BIT);
+	if (data != 0) {
+		debug("Read from reg = %lx - value = 0x%x\n",
+			hpipe_addr + HPIPE_LANE_STATUS1_REG, data);
+		ERROR("HPIPE_LANE_STATUS1_PCLK_EN_MASK is 0\n");
+		ret = -ETIMEDOUT;
+	}
+
+	debug_exit();
+
+	return ret;
+}
+
+static void rx_pre_train(uint64_t comphy_base, uint8_t comphy_index)
+{
+	uintptr_t hpipe_addr;
+	uint32_t mask, data;
+
+	hpipe_addr = HPIPE_ADDR(COMPHY_PIPE_FROM_COMPHY_ADDR(comphy_base),
+				comphy_index);
+
+	debug("rx_training preparation\n\n");
+
+	mask = HPIPE_TRX0_GAIN_TRAIN_WITH_C_MASK;
+	data = (0x1 << HPIPE_TRX0_GAIN_TRAIN_WITH_C_OFF);
+	mask |= HPIPE_TRX0_GAIN_TRAIN_WITH_SAMPLER_MASK;
+	data |= (0x0 << HPIPE_TRX0_GAIN_TRAIN_WITH_SAMPLER_OFF);
+	reg_set(hpipe_addr + HPIPE_TRX0_REG, data, mask);
+
+
+	mask = HPIPE_TRX_REG2_SUMF_BOOST_TARGET_C_MASK;
+	data = (0x1e << HPIPE_TRX_REG2_SUMF_BOOST_TARGET_C_OFF);
+	mask |= HPIPE_TRX_REG2_SUMF_BOOST_TARGET_K_MASK;
+	data |= (0x0 << HPIPE_TRX_REG2_SUMF_BOOST_TARGET_K_OFF);
+	reg_set(hpipe_addr + HPIPE_TRX_REG2, data, mask);
+
+	mask = HPIPE_TRX_REG1_MIN_BOOST_MODE_MASK;
+	data = (0x1 << HPIPE_TRX_REG1_MIN_BOOST_MODE_OFF);
+	reg_set(hpipe_addr + HPIPE_TRX_REG1, data, mask);
+
+	mask = HPIPE_CRD2_CRD_MIDPOINT_SMALL_THRES_K_MASK;
+	data = (0x8 << HPIPE_CRD2_CRD_MIDPOINT_SMALL_THRES_K_OFF);
+	reg_set(hpipe_addr + HPIPE_CDR_CONTROL1_REG, data, mask);
+
+	mask = HPIPE_CRD2_CRD_MIDPOINT_LARGE_THRES_K_MASK;
+	data = (0x8 << HPIPE_CRD2_CRD_MIDPOINT_LARGE_THRES_K_OFF);
+	reg_set(hpipe_addr + HPIPE_CDR_CONTROL2_REG, data, mask);
+
+	mask = HPIPE_CRD_MIDPOINT_PHASE_OS_MASK;
+	data = (0x0 << HPIPE_CRD_MIDPOINT_PHASE_OS_OFFSET);
+	reg_set(hpipe_addr + HPIPE_CDR_CONTROL_REG, data, mask);
+
+	mask = HPIPE_TRX_REG1_SUMFTAP_EN_MASK;
+	data = (0x38 << HPIPE_TRX_REG1_SUMFTAP_EN_OFF);
+	mask |= HPIPE_TRX_REG2_SUMF_BOOST_TARGET_C_MASK;
+	data |= (0x1e << HPIPE_TRX_REG2_SUMF_BOOST_TARGET_C_OFF);
+	reg_set(hpipe_addr + HPIPE_TRX_REG1, data, mask);
+}
+
+int mvebu_cp110_comphy_xfi_rx_training(uint64_t comphy_base,
+					      uint8_t comphy_index)
+{
+	uint32_t mask, data, timeout;
+	uint32_t g1_ffe_cap_sel, g1_ffe_res_sel, align90, g1_dfe_res;
+	uintptr_t hpipe_addr;
+
+	uint8_t ap_nr, cp_nr;
+
+	mvebu_cp110_get_ap_and_cp_nr(&ap_nr, &cp_nr, comphy_base);
+
+	hpipe_addr = HPIPE_ADDR(COMPHY_PIPE_FROM_COMPHY_ADDR(comphy_base),
+				comphy_index);
+
+	debug_enter();
+
+	rx_pre_train(comphy_base, comphy_index);
+
+	debug("Preparation for rx_training\n\n");
+
+	/* Use the FFE table */
+	mask = HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_MASK;
+	data = 0 << HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G1_SETTINGS_3_REG, data, mask);
+
+	/* Use auto-calibration value */
+	mask = HPIPE_CAL_RXCLKALIGN_90_EXT_EN_MASK;
+	data = 0 << HPIPE_CAL_RXCLKALIGN_90_EXT_EN_OFFSET;
+	reg_set(hpipe_addr + HPIPE_RX_CLK_ALIGN90_AND_TX_IDLE_CALIB_CTRL_REG,
+		data, mask);
+
+	/* Use Tx/Rx training results */
+	mask = HPIPE_DFE_RES_FORCE_MASK;
+	data = 0 << HPIPE_DFE_RES_FORCE_OFFSET;
+	reg_set(hpipe_addr + HPIPE_DFE_REG0, data, mask);
+
+	debug("Enable RX training\n\n");
+
+	mask = HPIPE_TRX_RX_TRAIN_EN_MASK;
+	data = 0x1 << HPIPE_TRX_RX_TRAIN_EN_OFFSET;
+	reg_set(hpipe_addr + HPIPE_TRX_TRAIN_CTRL_0_REG, data, mask);
+
+	/* Check the result of RX training */
+	timeout = RX_TRAINING_TIMEOUT;
+	mask = HPIPE_INTERRUPT_TRX_TRAIN_DONE_OFFSET |
+		HPIPE_INTERRUPT_DFE_DONE_INT_OFFSET |
+		HPIPE_INTERRUPT_RX_TRAIN_COMPLETE_INT_MASK;
+	while (timeout) {
+		data = mmio_read_32(hpipe_addr + HPIPE_INTERRUPT_1_REGISTER);
+		if (data & mask)
+			break;
+		mdelay(1);
+		timeout--;
+	}
+
+	debug("RX training result: interrupt reg 0x%lx = 0x%x\n\n",
+	       hpipe_addr + HPIPE_INTERRUPT_1_REGISTER, data);
+
+	if (timeout == 0 || data & HPIPE_TRX_TRAIN_TIME_OUT_INT_MASK) {
+		ERROR("Rx training timeout...\n");
+		return -ETIMEDOUT;
+	}
+
+	if (data & HPIPE_TRX_TRAIN_FAILED_MASK) {
+		ERROR("Rx training failed...\n");
+		return -EINVAL;
+	}
+
+	mask = HPIPE_TRX_RX_TRAIN_EN_MASK;
+	data = 0x0 << HPIPE_TRX_RX_TRAIN_EN_OFFSET;
+	reg_set(hpipe_addr + HPIPE_TRX_TRAIN_CTRL_0_REG, data, mask);
+
+	debug("Training done, reading results...\n\n");
+
+	mask = HPIPE_ADAPTED_FFE_ADAPTED_FFE_RES_MASK;
+	g1_ffe_res_sel = ((mmio_read_32(hpipe_addr +
+			   HPIPE_ADAPTED_FFE_CAPACITOR_COUNTER_CTRL_REG)
+			   & mask) >> HPIPE_ADAPTED_FFE_ADAPTED_FFE_RES_OFFSET);
+
+	mask = HPIPE_ADAPTED_FFE_ADAPTED_FFE_CAP_MASK;
+	g1_ffe_cap_sel = ((mmio_read_32(hpipe_addr +
+			   HPIPE_ADAPTED_FFE_CAPACITOR_COUNTER_CTRL_REG)
+			   & mask) >> HPIPE_ADAPTED_FFE_ADAPTED_FFE_CAP_OFFSET);
+
+	mask = HPIPE_DATA_PHASE_ADAPTED_OS_PH_MASK;
+	align90 = ((mmio_read_32(hpipe_addr + HPIPE_DATA_PHASE_OFF_CTRL_REG)
+		    & mask) >> HPIPE_DATA_PHASE_ADAPTED_OS_PH_OFFSET);
+
+	mask = HPIPE_ADAPTED_DFE_RES_MASK;
+	g1_dfe_res = ((mmio_read_32(hpipe_addr +
+		       HPIPE_ADAPTED_DFE_COEFFICIENT_1_REG)
+		       & mask) >> HPIPE_ADAPTED_DFE_RES_OFFSET);
+
+	debug("================================================\n");
+	debug("Switching to static configuration:\n");
+	debug("FFE_RES = 0x%x FFE_CAP = 0x%x align90 = 0x%x g1_dfe_res 0x%x\n",
+	       g1_ffe_res_sel, g1_ffe_cap_sel, align90, g1_dfe_res);
+	debug("Result after training: 0x%lx= 0x%x, 0x%lx= 0x%x, 0x%lx = 0x%x\n",
+	      (hpipe_addr + HPIPE_ADAPTED_FFE_CAPACITOR_COUNTER_CTRL_REG),
+	       mmio_read_32(hpipe_addr +
+			    HPIPE_ADAPTED_FFE_CAPACITOR_COUNTER_CTRL_REG),
+			    (hpipe_addr + HPIPE_DATA_PHASE_OFF_CTRL_REG),
+	       mmio_read_32(hpipe_addr + HPIPE_DATA_PHASE_OFF_CTRL_REG),
+			    (hpipe_addr + HPIPE_ADAPTED_DFE_COEFFICIENT_1_REG),
+	       mmio_read_32(hpipe_addr + HPIPE_ADAPTED_DFE_COEFFICIENT_1_REG));
+	debug("================================================\n");
+
+	/* Update FFE_RES */
+	mask = HPIPE_G1_SETTINGS_3_G1_FFE_RES_SEL_MASK;
+	data = g1_ffe_res_sel << HPIPE_G1_SETTINGS_3_G1_FFE_RES_SEL_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G1_SETTINGS_3_REG, data, mask);
+
+	/* Update FFE_CAP */
+	mask = HPIPE_G1_SETTINGS_3_G1_FFE_CAP_SEL_MASK;
+	data = g1_ffe_cap_sel << HPIPE_G1_SETTINGS_3_G1_FFE_CAP_SEL_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G1_SETTINGS_3_REG, data, mask);
+
+	/* Bypass the FFE table settings and use the FFE settings directly from
+	 * registers FFE_RES_SEL and FFE_CAP_SEL
+	 */
+	mask = HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_MASK;
+	data = 1 << HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G1_SETTINGS_3_REG, data, mask);
+
+	/* Force DFE resolution (use gen table value) */
+	mask = HPIPE_DFE_RES_FORCE_MASK;
+	data = 0x1 << HPIPE_DFE_RES_FORCE_OFFSET;
+	reg_set(hpipe_addr + HPIPE_DFE_REG0, data, mask);
+
+	/* 0x111-G1 DFE_Setting_4 */
+	mask = HPIPE_G1_SETTINGS_4_G1_DFE_RES_MASK;
+	data = g1_dfe_res << HPIPE_G1_SETTINGS_4_G1_DFE_RES_OFFSET;
+	reg_set(hpipe_addr + HPIPE_G1_SETTINGS_4_REG, data, mask);
+
+	printf("########################################################\n");
+	printf("# To use trained values update the ATF sources:\n");
+	printf("# plat/marvell/armada/a8k/<board_type>/board/phy-porting-layer.h ");
+	printf("file\n# with new values as below (for appropriate AP nr %d",
+	       ap_nr);
+	printf("and CP nr: %d comphy_index %d\n\n",
+	       cp_nr, comphy_index);
+	printf("static struct xfi_params xfi_static_values_tab[AP_NUM]");
+	printf("[CP_NUM][MAX_LANE_NR] = {\n");
+	printf("\t...\n");
+	printf("\t.g1_ffe_res_sel = 0x%x,\n", g1_ffe_res_sel);
+	printf("\t.g1_ffe_cap_sel = 0x%x,\n", g1_ffe_cap_sel);
+	printf("\t.align90 = 0x%x,\n", align90);
+	printf("\t.g1_dfe_res = 0x%x\n", g1_dfe_res);
+	printf("\t...\n");
+	printf("};\n\n");
+	printf("########################################################\n");
+
+	rx_trainng_done[ap_nr][cp_nr][comphy_index] = 1;
+
+	return 0;
+}
+
+/* During AP the proper mode is auto-negotiated and the mac, pcs and serdes
+ * configuration are done by the firmware loaded to the MG's CM3 for appropriate
+ * negotiated mode. Therefore there is no need to configure the mac, pcs and
+ * serdes from u-boot. The only thing that need to be setup is powering up
+ * the comphy, which is done through Common PHY<n> Configuration 1 Register
+ * (CP0: 0xF2441000, CP1: 0xF4441000). This step can't be done by MG's CM3,
+ * since it doesn't have an access to this register-set (but it has access to
+ * the network registers like: MG, AP, MAC, PCS, Serdes etc.)
+ */
+static int mvebu_cp110_comphy_ap_power_on(uint64_t comphy_base,
+					  uint8_t comphy_index,
+					  uint32_t comphy_mode)
+{
+	uint32_t mask, data;
+	uintptr_t comphy_addr = comphy_addr =
+				COMPHY_ADDR(comphy_base, comphy_index);
+
+	/* configure phy selector for XFI/SFI */
+	mvebu_cp110_comphy_set_phy_selector(comphy_base, comphy_index,
+					    comphy_mode);
+	debug_enter();
+	debug("stage: RFU configurations - hard reset comphy\n");
+	/* RFU configurations - hard reset comphy */
+	mask = COMMON_PHY_CFG1_PWR_UP_MASK;
+	data = 0x1 << COMMON_PHY_CFG1_PWR_UP_OFFSET;
+	mask |= COMMON_PHY_CFG1_PIPE_SELECT_MASK;
+	data |= 0x0 << COMMON_PHY_CFG1_PIPE_SELECT_OFFSET;
+	reg_set(comphy_addr + COMMON_PHY_CFG1_REG, data, mask);
+	debug_exit();
+
+#if MSS_SUPPORT
+	do {
+		uint8_t ap_nr, cp_nr;
+
+		/* start ap fw */
+		mvebu_cp110_get_ap_and_cp_nr(&ap_nr, &cp_nr, comphy_base);
+		mg_start_ap_fw(cp_nr, comphy_index);
+
+	} while (0);
+#endif
+	return 0;
+}
+
+/*
+ * This function allows to reset the digital synchronizers between
+ * the MAC and the PHY, it is required when the MAC changes its state.
+ */
+int mvebu_cp110_comphy_digital_reset(uint64_t comphy_base,
+				     uint8_t comphy_index,
+				     uint32_t comphy_mode, uint32_t command)
+{
+	int mode = COMPHY_GET_MODE(comphy_mode);
+	uintptr_t sd_ip_addr;
+	uint32_t mask, data;
+
+	sd_ip_addr = SD_ADDR(COMPHY_PIPE_FROM_COMPHY_ADDR(comphy_base),
+			     comphy_index);
+
+	switch (mode) {
+	case (COMPHY_SGMII_MODE):
+	case (COMPHY_2500BASEX_MODE):
+	case (COMPHY_XFI_MODE):
+	case (COMPHY_SFI_MODE):
+	case (COMPHY_RXAUI_MODE):
+		mask = SD_EXTERNAL_CONFIG1_RF_RESET_IN_MASK;
+		data = ((command == COMPHY_COMMAND_DIGITAL_PWR_OFF) ?
+			0x0 : 0x1) << SD_EXTERNAL_CONFIG1_RF_RESET_IN_OFFSET;
+		reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
+		break;
+	default:
+		ERROR("comphy%d: Digital PWR ON/OFF is not supported\n",
+			comphy_index);
+			return -EINVAL;
+	}
+
+	return 0;
+}
+
+int mvebu_cp110_comphy_power_on(uint64_t comphy_base,
+				uint8_t comphy_index,
+				uint64_t comphy_mode,
+				uint64_t comphy_train_base)
+{
+	int mode = COMPHY_GET_MODE(comphy_mode);
+	int err = 0;
+
+	debug_enter();
+
+	switch (mode) {
+	case(COMPHY_SATA_MODE):
+		err = mvebu_cp110_comphy_sata_power_on(comphy_base,
+						       comphy_index,
+						       comphy_mode);
+		break;
+	case(COMPHY_SGMII_MODE):
+	case(COMPHY_2500BASEX_MODE):
+		err = mvebu_cp110_comphy_sgmii_power_on(comphy_base,
+							comphy_index,
+							comphy_mode);
+		break;
+	/* From comphy perspective, XFI and SFI are the same */
+	case (COMPHY_XFI_MODE):
+	case (COMPHY_SFI_MODE):
+		err = mvebu_cp110_comphy_xfi_power_on(comphy_base,
+						      comphy_index,
+						      comphy_mode,
+						      comphy_train_base);
+		break;
+	case (COMPHY_PCIE_MODE):
+		err = mvebu_cp110_comphy_pcie_power_on(comphy_base,
+						       comphy_index,
+						       comphy_mode);
+		break;
+	case (COMPHY_RXAUI_MODE):
+		err = mvebu_cp110_comphy_rxaui_power_on(comphy_base,
+							comphy_index,
+							comphy_mode);
+		break;
+	case (COMPHY_USB3H_MODE):
+	case (COMPHY_USB3D_MODE):
+		err = mvebu_cp110_comphy_usb3_power_on(comphy_base,
+						       comphy_index,
+						       comphy_mode);
+		break;
+	case (COMPHY_AP_MODE):
+		err = mvebu_cp110_comphy_ap_power_on(comphy_base, comphy_index,
+						     comphy_mode);
+		break;
+	default:
+		ERROR("comphy%d: unsupported comphy mode\n", comphy_index);
+		err = -EINVAL;
+		break;
+	}
+
+	debug_exit();
+
+	return err;
+}
+
+int mvebu_cp110_comphy_power_off(uint64_t comphy_base, uint8_t comphy_index,
+				 uint64_t comphy_mode)
+{
+	uintptr_t sd_ip_addr, comphy_ip_addr;
+	uint32_t mask, data;
+	uint8_t ap_nr, cp_nr;
+	_Bool called_from_uboot = COMPHY_GET_CALLER(comphy_mode);
+
+	debug_enter();
+
+	/* Power-off might happen because of 2 things:
+	 *	1. Bootloader turns off unconnected lanes
+	 *	2. Linux turns off all lanes during boot
+	 *	   (and then reconfigure it).
+	 *
+	 * For PCIe, there's a problem:
+	 * In Armada 8K DB boards, PCIe initialization can be executed
+	 * only once (PCIe reset performed during chip power on and
+	 * it cannot be executed via GPIO later) so a lane configured to
+	 * PCIe should not be powered off by Linux.
+	 *
+	 * So, check 2 things:
+	 *	1. Is Linux called for power-off?
+	 *	2. Is the comphy configured to PCIe?
+	 * If the answer is YES for both 1 and 2, skip the power-off.
+	 *
+	 * TODO: In MacciatoBIN, PCIe reset is connected via GPIO,
+	 * so after GPIO reset is added to Linux Kernel, it can be
+	 * powered-off.
+	 */
+	if (!called_from_uboot) {
+		data = mmio_read_32(comphy_base +
+				    COMMON_SELECTOR_PIPE_REG_OFFSET);
+		data >>= (COMMON_SELECTOR_COMPHYN_FIELD_WIDTH * comphy_index);
+		data &= COMMON_SELECTOR_COMPHY_MASK;
+		if (data == COMMON_SELECTOR_PIPE_COMPHY_PCIE)
+			return 0;
+	}
+
+	mvebu_cp110_get_ap_and_cp_nr(&ap_nr, &cp_nr, comphy_base);
+
+	if (rx_trainng_done[ap_nr][cp_nr][comphy_index]) {
+		debug("Skip %s for comphy[%d][%d][%d], due to rx training\n",
+		       __func__, ap_nr, cp_nr, comphy_index);
+		return 0;
+	}
+
+	sd_ip_addr = SD_ADDR(COMPHY_PIPE_FROM_COMPHY_ADDR(comphy_base),
+			     comphy_index);
+	comphy_ip_addr = COMPHY_ADDR(comphy_base, comphy_index);
+
+	/* Hard reset the comphy, for Ethernet modes and Sata */
+	mask = SD_EXTERNAL_CONFIG1_RESET_IN_MASK;
+	data = 0x0 << SD_EXTERNAL_CONFIG1_RESET_IN_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG1_RESET_CORE_MASK;
+	data |= 0x0 << SD_EXTERNAL_CONFIG1_RESET_CORE_OFFSET;
+	mask |= SD_EXTERNAL_CONFIG1_RF_RESET_IN_MASK;
+	data |= 0x0 << SD_EXTERNAL_CONFIG1_RF_RESET_IN_OFFSET;
+	reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
+
+	/* PCIe reset */
+	spin_lock(&cp110_mac_reset_lock);
+
+	/* The mvebu_cp110_comphy_power_off will be called only from Linux (to
+	 * override settings done by bootloader) and it will be relevant only
+	 * to PCIe (called before check if to skip pcie power off or not).
+	 */
+	data = mmio_read_32(SYS_CTRL_FROM_COMPHY_ADDR(comphy_base) +
+						 SYS_CTRL_UINIT_SOFT_RESET_REG);
+	switch (comphy_index) {
+	case COMPHY_LANE0:
+		data &= ~PCIE_MAC_RESET_MASK_PORT0;
+		break;
+	case COMPHY_LANE4:
+		data &= ~PCIE_MAC_RESET_MASK_PORT1;
+		break;
+	case COMPHY_LANE5:
+		data &= ~PCIE_MAC_RESET_MASK_PORT2;
+		break;
+	}
+
+	mmio_write_32(SYS_CTRL_FROM_COMPHY_ADDR(comphy_base) +
+					   SYS_CTRL_UINIT_SOFT_RESET_REG, data);
+	spin_unlock(&cp110_mac_reset_lock);
+
+	/* Hard reset the comphy, for PCIe and usb3 */
+	mask = COMMON_PHY_CFG1_PWR_ON_RESET_MASK;
+	data = 0x0 << COMMON_PHY_CFG1_PWR_ON_RESET_OFFSET;
+	mask |= COMMON_PHY_CFG1_CORE_RSTN_MASK;
+	data |= 0x0 << COMMON_PHY_CFG1_CORE_RSTN_OFFSET;
+	reg_set(comphy_ip_addr + COMMON_PHY_CFG1_REG, data, mask);
+
+	/* Clear comphy PHY and PIPE selector, can't rely on previous config. */
+	mvebu_cp110_comphy_clr_phy_selector(comphy_base, comphy_index);
+	mvebu_cp110_comphy_clr_pipe_selector(comphy_base, comphy_index);
+
+	debug_exit();
+
+	return 0;
+}
diff --git a/drivers/marvell/comphy/phy-comphy-cp110.h b/drivers/marvell/comphy/phy-comphy-cp110.h
new file mode 100644
index 0000000..0be6c26
--- /dev/null
+++ b/drivers/marvell/comphy/phy-comphy-cp110.h
@@ -0,0 +1,102 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+/* Those are parameters for xfi mode, which need to be tune for each board type.
+ * For known DB boards the parameters was already calibrated and placed under
+ * the plat/marvell/armada/a8k/<board_type>/board/phy-porting-layer.h
+ */
+struct xfi_params {
+	uint8_t g1_ffe_res_sel;
+	uint8_t g1_ffe_cap_sel;
+	uint8_t align90;
+	uint8_t g1_dfe_res;
+	uint8_t g1_amp;
+	uint8_t g1_emph;
+	uint8_t g1_emph_en;
+	uint8_t g1_tx_amp_adj;
+	uint8_t g1_tx_emph_en;
+	uint8_t g1_tx_emph;
+	uint8_t g1_rx_selmuff;
+	uint8_t g1_rx_selmufi;
+	uint8_t g1_rx_selmupf;
+	uint8_t g1_rx_selmupi;
+	_Bool valid;
+};
+
+struct sata_params {
+	uint8_t g1_amp;
+	uint8_t g2_amp;
+	uint8_t g3_amp;
+
+	uint8_t g1_emph;
+	uint8_t g2_emph;
+	uint8_t g3_emph;
+
+	uint8_t g1_emph_en;
+	uint8_t g2_emph_en;
+	uint8_t g3_emph_en;
+
+	uint8_t g1_tx_amp_adj;
+	uint8_t g2_tx_amp_adj;
+	uint8_t g3_tx_amp_adj;
+
+	uint8_t g1_tx_emph_en;
+	uint8_t g2_tx_emph_en;
+	uint8_t g3_tx_emph_en;
+
+	uint8_t g1_tx_emph;
+	uint8_t g2_tx_emph;
+	uint8_t g3_tx_emph;
+
+	uint8_t g3_dfe_res;
+
+	uint8_t g3_ffe_res_sel;
+
+	uint8_t g3_ffe_cap_sel;
+
+	uint8_t align90;
+
+	uint8_t g1_rx_selmuff;
+	uint8_t g2_rx_selmuff;
+	uint8_t g3_rx_selmuff;
+
+	uint8_t g1_rx_selmufi;
+	uint8_t g2_rx_selmufi;
+	uint8_t g3_rx_selmufi;
+
+	uint8_t g1_rx_selmupf;
+	uint8_t g2_rx_selmupf;
+	uint8_t g3_rx_selmupf;
+
+	uint8_t g1_rx_selmupi;
+	uint8_t g2_rx_selmupi;
+	uint8_t g3_rx_selmupi;
+
+	uint8_t polarity_invert;
+
+	_Bool valid;
+};
+
+struct usb_params {
+	uint8_t polarity_invert;
+};
+
+int mvebu_cp110_comphy_is_pll_locked(uint64_t comphy_base,
+				     uint8_t comphy_index);
+int mvebu_cp110_comphy_power_off(uint64_t comphy_base,
+				 uint8_t comphy_index, uint64_t comphy_mode);
+int mvebu_cp110_comphy_power_on(uint64_t comphy_base, uint8_t comphy_index,
+				uint64_t comphy_mode,
+				uint64_t comphy_train_base);
+int mvebu_cp110_comphy_xfi_rx_training(uint64_t comphy_base,
+				       uint8_t comphy_index);
+int mvebu_cp110_comphy_digital_reset(uint64_t comphy_base, uint8_t comphy_index,
+				     uint32_t comphy_mode, uint32_t command);
+
+#define COMPHY_POLARITY_NO_INVERT	0
+#define COMPHY_POLARITY_TXD_INVERT	1
+#define COMPHY_POLARITY_RXD_INVERT	2
diff --git a/drivers/marvell/comphy/phy-default-porting-layer.h b/drivers/marvell/comphy/phy-default-porting-layer.h
new file mode 100644
index 0000000..3c63c64
--- /dev/null
+++ b/drivers/marvell/comphy/phy-default-porting-layer.h
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef PHY_DEFAULT_PORTING_LAYER_H
+#define PHY_DEFAULT_PORTING_LAYER_H
+
+
+#define MAX_LANE_NR		6
+
+#warning "Using default comphy params - you may need to suit them to your board"
+
+static const struct xfi_params
+	xfi_static_values_tab[AP_NUM][CP_NUM][MAX_LANE_NR] = {
+	[0 ... AP_NUM-1][0 ... CP_NUM-1][0 ... MAX_LANE_NR-1] = {
+		.g1_ffe_res_sel = 0x3, .g1_ffe_cap_sel = 0xf, .align90 = 0x5f,
+		.g1_dfe_res = 0x2, .g1_amp = 0x1c, .g1_emph = 0xe,
+		.g1_emph_en = 0x1, .g1_tx_amp_adj = 0x1, .g1_tx_emph_en = 0x1,
+		.g1_tx_emph = 0x0, .g1_rx_selmuff = 0x1, .g1_rx_selmufi = 0x0,
+		.g1_rx_selmupf = 0x2, .g1_rx_selmupi = 0x2, .valid = 1
+	}
+};
+
+static const struct sata_params
+	sata_static_values_tab[AP_NUM][CP_NUM][MAX_LANE_NR] = {
+	[0 ... AP_NUM-1][0 ... CP_NUM-1][0 ... MAX_LANE_NR-1] = {
+		.g1_amp = 0x8, .g2_amp = 0xa, .g3_amp = 0x1e,
+		.g1_emph = 0x1, .g2_emph = 0x2, .g3_emph = 0xe,
+		.g1_emph_en = 0x1, .g2_emph_en = 0x1, .g3_emph_en = 0x1,
+		.g1_tx_amp_adj = 0x1, .g2_tx_amp_adj = 0x1,
+		.g3_tx_amp_adj = 0x1,
+		.g1_tx_emph_en = 0x0, .g2_tx_emph_en = 0x0,
+		.g3_tx_emph_en = 0x0,
+		.g1_tx_emph = 0x1, .g2_tx_emph = 0x1, .g3_tx_emph = 0x1,
+		.g3_dfe_res = 0x1, .g3_ffe_res_sel = 0x4, .g3_ffe_cap_sel = 0xf,
+		.align90 = 0x61,
+		.g1_rx_selmuff = 0x3, .g2_rx_selmuff = 0x3,
+		.g3_rx_selmuff = 0x3,
+		.g1_rx_selmufi = 0x0, .g2_rx_selmufi = 0x0,
+		.g3_rx_selmufi = 0x3,
+		.g1_rx_selmupf = 0x1, .g2_rx_selmupf = 0x1,
+		.g3_rx_selmupf = 0x2,
+		.g1_rx_selmupi = 0x0, .g2_rx_selmupi = 0x0,
+		.g3_rx_selmupi = 0x2,
+		.polarity_invert = COMPHY_POLARITY_NO_INVERT,
+		.valid = 0x1
+	},
+};
+
+static const struct usb_params
+	usb_static_values_tab[AP_NUM][CP_NUM][MAX_LANE_NR] = {
+	[0 ... AP_NUM-1][0 ... CP_NUM-1][0 ... MAX_LANE_NR-1] = {
+		.polarity_invert = COMPHY_POLARITY_NO_INVERT
+	},
+};
+#endif /* PHY_DEFAULT_PORTING_LAYER_H */