Adding upstream version 2.10.0+dfsg.upstream/2.10.0+dfsgupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 246 insertions, 0 deletions

diff --git a/drivers/st/etzpc/etzpc.c b/drivers/st/etzpc/etzpc.c
new file mode 100644
index 0000000..4c3c26d
--- /dev/null
+++ b/drivers/st/etzpc/etzpc.c
@@ -0,0 +1,246 @@
+/*
+ * Copyright (c) 2017-2022, STMicroelectronics - All Rights Reserved
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <errno.h>
+#include <stdint.h>
+
+#include <arch_helpers.h>
+#include <common/debug.h>
+#include <drivers/st/etzpc.h>
+#include <dt-bindings/soc/st,stm32-etzpc.h>
+#include <lib/mmio.h>
+#include <lib/utils_def.h>
+#include <libfdt.h>
+
+#include <platform_def.h>
+
+/* Device Tree related definitions */
+#define ETZPC_COMPAT			"st,stm32-etzpc"
+#define ETZPC_LOCK_MASK			0x1U
+#define ETZPC_MODE_SHIFT		8
+#define ETZPC_MODE_MASK			GENMASK(1, 0)
+#define ETZPC_ID_SHIFT			16
+#define ETZPC_ID_MASK			GENMASK(7, 0)
+
+/* ID Registers */
+#define ETZPC_TZMA0_SIZE		0x000U
+#define ETZPC_DECPROT0			0x010U
+#define ETZPC_DECPROT_LOCK0		0x030U
+#define ETZPC_HWCFGR			0x3F0U
+#define ETZPC_VERR			0x3F4U
+
+/* ID Registers fields */
+#define ETZPC_TZMA0_SIZE_LOCK		BIT(31)
+#define ETZPC_DECPROT0_MASK		GENMASK(1, 0)
+#define ETZPC_HWCFGR_NUM_TZMA_SHIFT	0
+#define ETZPC_HWCFGR_NUM_PER_SEC_SHIFT	8
+#define ETZPC_HWCFGR_NUM_AHB_SEC_SHIFT	16
+#define ETZPC_HWCFGR_CHUNCKS1N4_SHIFT	24
+
+#define DECPROT_SHIFT			1
+#define IDS_PER_DECPROT_REGS		16U
+#define IDS_PER_DECPROT_LOCK_REGS	32U
+
+/*
+ * etzpc_instance.
+ * base : register base address set during init given by user
+ * chunk_size : supported TZMA size steps
+ * num_tzma: number of TZMA zone read from register at init
+ * num_ahb_sec : number of securable AHB master zone read from register
+ * num_per_sec : number of securable AHB & APB Peripherals read from register
+ * revision : IP revision read from register at init
+ */
+struct etzpc_instance {
+	uintptr_t base;
+	uint8_t chunck_size;
+	uint8_t num_tzma;
+	uint8_t num_per_sec;
+	uint8_t num_ahb_sec;
+	uint8_t revision;
+};
+
+/* Only 1 instance of the ETZPC is expected per platform */
+static struct etzpc_instance etzpc_dev;
+
+/*
+ * Implementation uses uint8_t to store each securable DECPROT configuration.
+ * When resuming from deep suspend, the DECPROT configurations are restored.
+ */
+#define PERIPH_LOCK_BIT		BIT(7)
+#define PERIPH_ATTR_MASK	GENMASK(2, 0)
+
+#if ENABLE_ASSERTIONS
+static bool valid_decprot_id(unsigned int id)
+{
+	return id < (unsigned int)etzpc_dev.num_per_sec;
+}
+
+static bool valid_tzma_id(unsigned int id)
+{
+	return id < (unsigned int)etzpc_dev.num_tzma;
+}
+#endif
+
+/*
+ * etzpc_configure_decprot : Load a DECPROT configuration
+ * decprot_id : ID of the IP
+ * decprot_attr : Restriction access attribute
+ */
+void etzpc_configure_decprot(uint32_t decprot_id,
+			     enum etzpc_decprot_attributes decprot_attr)
+{
+	uintptr_t offset = 4U * (decprot_id / IDS_PER_DECPROT_REGS);
+	uint32_t shift = (decprot_id % IDS_PER_DECPROT_REGS) << DECPROT_SHIFT;
+	uint32_t masked_decprot = (uint32_t)decprot_attr & ETZPC_DECPROT0_MASK;
+
+	assert(valid_decprot_id(decprot_id));
+
+	mmio_clrsetbits_32(etzpc_dev.base + ETZPC_DECPROT0 + offset,
+			   (uint32_t)ETZPC_DECPROT0_MASK << shift,
+			   masked_decprot << shift);
+}
+
+/*
+ * etzpc_get_decprot : Get the DECPROT attribute
+ * decprot_id : ID of the IP
+ * return : Attribute of this DECPROT
+ */
+enum etzpc_decprot_attributes etzpc_get_decprot(uint32_t decprot_id)
+{
+	uintptr_t offset = 4U * (decprot_id / IDS_PER_DECPROT_REGS);
+	uint32_t shift = (decprot_id % IDS_PER_DECPROT_REGS) << DECPROT_SHIFT;
+	uintptr_t base_decprot = etzpc_dev.base + offset;
+	uint32_t value;
+
+	assert(valid_decprot_id(decprot_id));
+
+	value = (mmio_read_32(base_decprot + ETZPC_DECPROT0) >> shift) &
+		ETZPC_DECPROT0_MASK;
+
+	return (enum etzpc_decprot_attributes)value;
+}
+
+/*
+ * etzpc_lock_decprot : Lock access to the DECPROT attribute
+ * decprot_id : ID of the IP
+ */
+void etzpc_lock_decprot(uint32_t decprot_id)
+{
+	uintptr_t offset = 4U * (decprot_id / IDS_PER_DECPROT_LOCK_REGS);
+	uint32_t shift = BIT(decprot_id % IDS_PER_DECPROT_LOCK_REGS);
+	uintptr_t base_decprot = etzpc_dev.base + offset;
+
+	assert(valid_decprot_id(decprot_id));
+
+	mmio_write_32(base_decprot + ETZPC_DECPROT_LOCK0, shift);
+}
+
+/*
+ * etzpc_configure_tzma : Configure the target TZMA read only size
+ * tzma_id : ID of the memory
+ * tzma_value : read-only size
+ */
+void etzpc_configure_tzma(uint32_t tzma_id, uint16_t tzma_value)
+{
+	assert(valid_tzma_id(tzma_id));
+
+	mmio_write_32(etzpc_dev.base + ETZPC_TZMA0_SIZE +
+		      (sizeof(uint32_t) * tzma_id), tzma_value);
+}
+
+/*
+ * etzpc_get_tzma : Get the target TZMA read only size
+ * tzma_id : TZMA ID
+ * return : Size of read only size
+ */
+uint16_t etzpc_get_tzma(uint32_t tzma_id)
+{
+	assert(valid_tzma_id(tzma_id));
+
+	return (uint16_t)mmio_read_32(etzpc_dev.base + ETZPC_TZMA0_SIZE +
+				      (sizeof(uint32_t) * tzma_id));
+}
+
+/*
+ * etzpc_lock_tzma : Lock the target TZMA
+ * tzma_id : TZMA ID
+ */
+void etzpc_lock_tzma(uint32_t tzma_id)
+{
+	assert(valid_tzma_id(tzma_id));
+
+	mmio_setbits_32(etzpc_dev.base + ETZPC_TZMA0_SIZE +
+			(sizeof(uint32_t) * tzma_id), ETZPC_TZMA0_SIZE_LOCK);
+}
+
+/*
+ * etzpc_get_lock_tzma : Return the lock status of the target TZMA
+ * tzma_id : TZMA ID
+ * return : True if TZMA is locked, false otherwise
+ */
+bool etzpc_get_lock_tzma(uint32_t tzma_id)
+{
+	uint32_t tzma_size;
+
+	assert(valid_tzma_id(tzma_id));
+
+	tzma_size = mmio_read_32(etzpc_dev.base + ETZPC_TZMA0_SIZE +
+				 (sizeof(uint32_t) * tzma_id));
+
+	return (tzma_size & ETZPC_TZMA0_SIZE_LOCK) != 0;
+}
+
+/*
+ * etzpc_get_num_per_sec : Return the DECPROT ID limit value
+ */
+uint8_t etzpc_get_num_per_sec(void)
+{
+	return etzpc_dev.num_per_sec;
+}
+
+/*
+ * etzpc_get_revision : Return the ETZPC IP revision
+ */
+uint8_t etzpc_get_revision(void)
+{
+	return etzpc_dev.revision;
+}
+
+/*
+ * etzpc_get_base_address : Return the ETZPC IP base address
+ */
+uintptr_t etzpc_get_base_address(void)
+{
+	return etzpc_dev.base;
+}
+
+/*
+ * etzpc_init : Initialize the ETZPC driver
+ * Return 0 on success and a negative errno on failure
+ */
+int etzpc_init(void)
+{
+	uint32_t hwcfg;
+
+	etzpc_dev.base = STM32MP1_ETZPC_BASE;
+
+	hwcfg = mmio_read_32(etzpc_dev.base + ETZPC_HWCFGR);
+
+	etzpc_dev.num_tzma = (uint8_t)(hwcfg >> ETZPC_HWCFGR_NUM_TZMA_SHIFT);
+	etzpc_dev.num_per_sec = (uint8_t)(hwcfg >>
+					  ETZPC_HWCFGR_NUM_PER_SEC_SHIFT);
+	etzpc_dev.num_ahb_sec = (uint8_t)(hwcfg >>
+					  ETZPC_HWCFGR_NUM_AHB_SEC_SHIFT);
+	etzpc_dev.chunck_size = (uint8_t)(hwcfg >>
+					  ETZPC_HWCFGR_CHUNCKS1N4_SHIFT);
+
+	etzpc_dev.revision = mmio_read_8(etzpc_dev.base + ETZPC_VERR);
+
+	VERBOSE("ETZPC version 0x%x", etzpc_dev.revision);
+
+	return 0;
+}