Adding upstream version 2.10.0+dfsg.upstream/2.10.0+dfsgupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

45 files changed, 4503 insertions, 0 deletions

diff --git a/include/drivers/nxp/auth/csf_hdr_parser/csf_hdr.h b/include/drivers/nxp/auth/csf_hdr_parser/csf_hdr.h
new file mode 100644
index 0000000..ae56d3b
--- /dev/null
+++ b/include/drivers/nxp/auth/csf_hdr_parser/csf_hdr.h
@@ -0,0 +1,155 @@
+/*
+ * Copyright 2017-2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#ifndef CSF_HDR_H
+#define CSF_HDR_H
+
+#include "caam.h"
+#include "hash.h"
+#include "rsa.h"
+
+/* Barker code size in bytes */
+#define CSF_BARKER_LEN	4	/* barker code length in ESBC uboot client */
+				/* header */
+
+#ifdef CSF_HDR_CH3
+struct csf_hdr {
+	uint8_t barker[CSF_BARKER_LEN];	/* 0x00 Barker code */
+	uint32_t srk_tbl_off;		/* 0x04 SRK Table Offset */
+
+	struct {
+		uint8_t num_srk;	/* 0x08 No. of keys */
+		uint8_t srk_sel;	/*  Key no. to be used */
+		uint8_t reserve;	/* 0x0a rseerved */
+	} len_kr;
+	uint8_t ie_flag;
+
+	uint32_t uid_flag;
+
+	uint32_t psign;			/* 0x10 signature offset */
+	uint32_t sign_len;			/* 0x14 length of signature */
+
+	union {
+		struct {
+			uint32_t sg_table_offset; /* 0x18 SG Table Offset */
+			uint32_t sg_entries;	  /* 0x1c no of entries in SG */
+		} sg_isbc;
+		uint64_t img_addr;	/* 64 bit pointer to ESBC Image */
+	};
+
+	union {
+		struct {
+			uint32_t img_size;   /* ESBC client img size in bytes */
+			uint32_t ie_key_sel;
+		} img;
+		uint64_t entry_point;	  /* 0x20-0x24 ESBC entry point */
+	};
+
+	uint32_t fsl_uid_0;			/* 0x28 Freescale unique id 0 */
+	uint32_t fsl_uid_1;			/* 0x2c Freescale unique id 1 */
+	uint32_t oem_uid_0;			/* 0x30 OEM unique id 0 */
+	uint32_t oem_uid_1;			/* 0x34 OEM unique id 1 */
+	uint32_t oem_uid_2;			/* 0x38 OEM unique id 2 */
+	uint32_t oem_uid_3;			/* 0x3c OEM unique id 3 */
+	uint32_t oem_uid_4;			/* 0x40 OEM unique id 4 */
+
+	uint32_t reserved[3];		/* 0x44 - 0x4f */
+};
+
+/* Srk table and key revocation check */
+#define UNREVOCABLE_KEY	8
+#define REVOC_KEY_ALIGN 7
+#define MAX_KEY_ENTRIES 8
+
+#else
+
+/* CSF header for Chassis 2 */
+struct csf_hdr {
+	uint8_t barker[CSF_BARKER_LEN];	/* barker code */
+	union {
+		uint32_t pkey;		/* public key offset */
+		uint32_t srk_tbl_off;
+	};
+
+	union {
+		uint32_t key_len;		/* pub key length in bytes */
+		struct {
+			uint32_t srk_table_flag:8;
+			uint32_t srk_sel:8;
+			uint32_t num_srk:16;
+		} len_kr;
+	};
+
+	uint32_t psign;		/* signature offset */
+	uint32_t sign_len;		/* length of the signature in bytes */
+
+	/* SG Table used by ISBC header */
+	union {
+		struct {
+			uint32_t sg_table_offset; /* 0x14 SG Table Offset */
+			uint32_t sg_entries;	/* no of entries in SG table */
+		} sg_isbc;
+		struct {
+			uint32_t reserved1;	/* Reserved field */
+			uint32_t img_size;	/* ESBC img size in bytes */
+		} img;
+	};
+
+	uint32_t entry_point;		/* ESBC client entry point */
+	uint32_t reserved2;		/* Scatter gather flag */
+	uint32_t uid_flag;
+	uint32_t fsl_uid_0;
+	uint32_t oem_uid_0;
+	uint32_t reserved3[2];
+	uint32_t fsl_uid_1;
+	uint32_t oem_uid_1;
+
+	/* The entries below aren't present in ISBC header */
+	uint64_t img_addr;	/* 64 bit pointer to ESBC Image */
+	uint32_t ie_flag;
+	uint32_t ie_key_sel;
+};
+
+/* Srk table and key revocation check */
+#define UNREVOCABLE_KEY	4
+#define REVOC_KEY_ALIGN 3
+#define MAX_KEY_ENTRIES 4
+
+#endif
+
+struct srk_table {
+	uint32_t key_len;
+	uint8_t pkey[2 * RSA_4K_KEY_SZ_BYTES];
+};
+
+/*
+ * This struct contains the following fields
+ * length of the segment
+ * Destination Target ID
+ * source address
+ * destination address
+ */
+struct sg_table {
+	uint32_t len;			/* Length of Image */
+	uint32_t res1;
+	union {
+		uint64_t src_addr;	/* SRC Address of Image */
+		struct {
+			uint32_t src_addr;
+			uint32_t dst_addr;
+		} img;
+	};
+};
+
+int validate_esbc_header(void *img_hdr, void **img_key, uint32_t *key_len,
+			 void **img_sign, uint32_t *sign_len,
+			 enum sig_alg *algo);
+
+int calc_img_hash(struct csf_hdr *hdr, void *img_addr, uint32_t img_size,
+		  uint8_t *img_hash, uint32_t *hash_len);
+
+#endif
diff --git a/include/drivers/nxp/console/plat_console.h b/include/drivers/nxp/console/plat_console.h
new file mode 100644
index 0000000..8b1b23a
--- /dev/null
+++ b/include/drivers/nxp/console/plat_console.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright 2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#ifndef PLAT_CONSOLE_H
+#define PLAT_CONSOLE_H
+
+#include <stdint.h>
+#include <drivers/console.h>
+
+#if (NXP_CONSOLE == NS16550)
+/*
+ * NXP specific UART - 16550 configuration
+ *
+ * Initialize a NXP 16550 console instance and register it with the console
+ * framework. The |console| pointer must point to storage that will be valid
+ * for the lifetime of the console, such as a global or static local variable.
+ * Its contents will be reinitialized from scratch.
+ * When |clock| has a value of 0, the UART will *not* be initialised. This
+ * means the UART should already be enabled and the baudrate and clock setup
+ * should have been done already, either by platform specific code or by
+ * previous firmware stages. The |baud| parameter will be ignored in this
+ * case as well.
+ */
+int nxp_console_16550_register(uintptr_t baseaddr, uint32_t clock,
+			       uint32_t baud, console_t *console);
+#endif
+/*
+ * Function to initialize platform's console
+ * and register with console framework
+ */
+void plat_console_init(uintptr_t nxp_console_addr, uint32_t uart_clk_div,
+			uint32_t baud);
+
+#endif
diff --git a/include/drivers/nxp/crypto/caam/caam.h b/include/drivers/nxp/crypto/caam/caam.h
new file mode 100644
index 0000000..6cc1f3d
--- /dev/null
+++ b/include/drivers/nxp/crypto/caam/caam.h
@@ -0,0 +1,53 @@
+/*
+ * Copyright 2017-2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#ifndef CAAM_H
+#define CAAM_H
+
+#include "caam_io.h"
+#include "sec_jr_driver.h"
+
+
+/* Job ring 3 is reserved for usage by sec firmware */
+#define DEFAULT_JR	3
+
+#if defined(CONFIG_CHASSIS_3_2) || defined(CONFIG_CHASSIS_3) || defined(CONFIG_CHASSIS_2)
+#define CAAM_JR0_OFFSET			0x10000
+#define CAAM_JR1_OFFSET			0x20000
+#define CAAM_JR2_OFFSET			0x30000
+#define CAAM_JR3_OFFSET			0x40000
+#endif
+
+enum sig_alg {
+	RSA,
+	ECC
+};
+
+/* This function does basic SEC Initialization */
+int sec_init(uintptr_t nxp_caam_addr);
+int config_sec_block(void);
+uintptr_t get_caam_addr(void);
+
+/* This function is used to submit jobs to JR */
+int run_descriptor_jr(struct job_descriptor *desc);
+
+/* This function is used to instatiate the HW RNG is already not instantiated */
+int hw_rng_instantiate(void);
+
+/* This function is used to return random bytes of byte_len from HW RNG */
+int get_rand_bytes_hw(uint8_t *bytes, int byte_len);
+
+/* This function is used to set the hw unique key from HW CAAM */
+int get_hw_unq_key_blob_hw(uint8_t *hw_key, int size);
+
+/* This function is used to fetch random number from
+ * CAAM of length either of 4 bytes or 8 bytes depending
+ * rngWidth value.
+ */
+unsigned long long get_random(int rngWidth);
+
+#endif /* CAAM_H */
diff --git a/include/drivers/nxp/crypto/caam/caam_io.h b/include/drivers/nxp/crypto/caam/caam_io.h
new file mode 100644
index 0000000..b68f836
--- /dev/null
+++ b/include/drivers/nxp/crypto/caam/caam_io.h
@@ -0,0 +1,56 @@
+/*
+ * Copyright 2018-2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#ifndef CAAM_IO_H
+#define CAAM_IO_H
+
+#include <endian.h>
+#include <lib/mmio.h>
+
+typedef unsigned long long phys_addr_t;
+typedef unsigned long long phys_size_t;
+
+/* Return higher 32 bits of physical address */
+#define PHYS_ADDR_HI(phys_addr) \
+	    (uint32_t)(((uint64_t)phys_addr) >> 32)
+
+/* Return lower 32 bits of physical address */
+#define PHYS_ADDR_LO(phys_addr) \
+	    (uint32_t)(((uint64_t)phys_addr) & 0xFFFFFFFF)
+
+#ifdef NXP_SEC_BE
+#define sec_in32(a)	bswap32(mmio_read_32((uintptr_t)(a)))
+#define sec_out32(a, v)	mmio_write_32((uintptr_t)(a), bswap32(v))
+#define sec_in64(addr)  (					\
+	((uint64_t)sec_in32((uintptr_t)(addr)) << 32) |	\
+	(sec_in32(((uintptr_t)(addr)) + 4)))
+#define sec_out64(addr, val) ({					\
+	sec_out32(((uintptr_t)(addr)), (uint32_t)((val) >> 32));	\
+	sec_out32(((uintptr_t)(addr)) + 4, (uint32_t)(val)); })
+#elif defined(NXP_SEC_LE)
+#define sec_in32(a)	mmio_read_32((uintptr_t)(a))
+#define sec_out32(a, v)	mmio_write_32((uintptr_t)(a), (v))
+#define sec_in64(addr)	(					\
+	((uint64_t)sec_in32((uintptr_t)(addr) + 4) << 32) |	\
+	(sec_in32((uintptr_t)(addr))))
+#define sec_out64(addr, val) ({						\
+	sec_out32(((uintptr_t)(addr)) + 4, (uint32_t)((val) >> 32));	\
+	sec_out32(((uintptr_t)(addr)), (uint32_t)(val)); })
+#else
+#error Please define CCSR SEC register endianness
+#endif
+
+static inline void *ptov(phys_addr_t *ptr)
+{
+	return (void *)ptr;
+}
+
+static inline phys_addr_t *vtop(void *ptr)
+{
+	return (phys_addr_t *)ptr;
+}
+#endif /* CAAM_IO_H */
diff --git a/include/drivers/nxp/crypto/caam/hash.h b/include/drivers/nxp/crypto/caam/hash.h
new file mode 100644
index 0000000..9136dca
--- /dev/null
+++ b/include/drivers/nxp/crypto/caam/hash.h
@@ -0,0 +1,85 @@
+/*
+ * Copyright 2017-2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#ifndef __HASH_H__
+#define __HASH_H__
+
+#include <stdbool.h>
+
+/* List of hash algorithms */
+enum hash_algo {
+	SHA1 = 0,
+	SHA256
+};
+
+/* number of bytes in the SHA256-256 digest */
+#define SHA256_DIGEST_SIZE 32
+
+/*
+ * number of words in the digest - Digest is kept internally
+ * as 8 32-bit words
+ */
+#define _SHA256_DIGEST_LENGTH 8
+
+/*
+ * block length - A block, treated as a sequence of
+ * 32-bit words
+ */
+#define SHA256_BLOCK_LENGTH 16
+
+/* number of bytes in the block */
+#define SHA256_DATA_SIZE 64
+
+#define MAX_SG		12
+
+struct sg_entry {
+#if defined(NXP_SEC_LE)
+	uint32_t addr_lo;	/* Memory Address - lo */
+	uint32_t addr_hi;	/* Memory Address of start of buffer - hi */
+#else
+	uint32_t addr_hi;	/* Memory Address of start of buffer - hi */
+	uint32_t addr_lo;	/* Memory Address - lo */
+#endif
+
+	uint32_t len_flag;	/* Length of the data in the frame */
+#define SG_ENTRY_LENGTH_MASK	0x3FFFFFFF
+#define SG_ENTRY_EXTENSION_BIT	0x80000000
+#define SG_ENTRY_FINAL_BIT	0x40000000
+	uint32_t bpid_offset;
+#define SG_ENTRY_BPID_MASK	0x00FF0000
+#define SG_ENTRY_BPID_SHIFT	16
+#define SG_ENTRY_OFFSET_MASK	0x00001FFF
+#define SG_ENTRY_OFFSET_SHIFT	0
+};
+
+/*
+ * SHA256-256 context
+ * contain the following fields
+ * State
+ * count low
+ * count high
+ * block data buffer
+ * index to the buffer
+ */
+struct hash_ctx {
+	struct sg_entry sg_tbl[MAX_SG];
+	uint32_t hash_desc[64];
+	uint8_t hash[SHA256_DIGEST_SIZE];
+	uint32_t sg_num;
+	uint32_t len;
+	uint8_t *data;
+	enum hash_algo algo;
+	bool active;
+};
+
+int hash_init(enum hash_algo algo, void **ctx);
+int hash_update(enum hash_algo algo, void *context, void *data_ptr,
+		unsigned int data_len);
+int hash_final(enum hash_algo algo, void *context, void *hash_ptr,
+	       unsigned int hash_len);
+
+#endif
diff --git a/include/drivers/nxp/crypto/caam/jobdesc.h b/include/drivers/nxp/crypto/caam/jobdesc.h
new file mode 100644
index 0000000..efef228
--- /dev/null
+++ b/include/drivers/nxp/crypto/caam/jobdesc.h
@@ -0,0 +1,56 @@
+/*
+ * Copyright 2017-2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#ifndef __JOBDESC_H
+#define __JOBDESC_H
+
+#include <rsa.h>
+
+#define DESC_LEN_MASK		0x7f
+#define DESC_START_SHIFT	16
+
+#define KEY_BLOB_SIZE 32
+#define MAC_SIZE 16
+
+#define KEY_IDNFR_SZ_BYTES 16
+#define CLASS_SHIFT 25
+#define CLASS_2	(0x02 << CLASS_SHIFT)
+
+#define CMD_SHIFT		27
+#define CMD_OPERATION		(U(0x10) << CMD_SHIFT)
+
+#define OP_TYPE_SHIFT		24
+#define OP_TYPE_ENCAP_PROTOCOL	(0x07 << OP_TYPE_SHIFT)
+
+/* Assuming OP_TYPE = OP_TYPE_UNI_PROTOCOL */
+#define OP_PCLID_SHIFT		16
+#define OP_PCLID_BLOB		(0x0d << OP_PCLID_SHIFT)
+
+#define BLOB_PROTO_INFO		 0x00000002
+
+uint32_t desc_length(uint32_t *desc);
+
+int cnstr_rng_jobdesc(uint32_t *desc, uint32_t state_handle,
+		      uint32_t *add_inp, uint32_t add_ip_len,
+		      uint8_t *out_data, uint32_t len);
+
+int cnstr_rng_instantiate_jobdesc(uint32_t *desc);
+
+/* Construct descriptor to generate hw key blob */
+int cnstr_hw_encap_blob_jobdesc(uint32_t *desc,
+				uint8_t *key_idnfr, uint32_t key_sz,
+				uint32_t key_class, uint8_t *plain_txt,
+				uint32_t in_sz, uint8_t *enc_blob,
+				uint32_t out_sz, uint32_t operation);
+
+void cnstr_hash_jobdesc(uint32_t *desc, uint8_t *msg, uint32_t msgsz,
+			uint8_t *digest);
+
+void cnstr_jobdesc_pkha_rsaexp(uint32_t *desc,
+			       struct pk_in_params *pkin, uint8_t *out,
+			       uint32_t out_siz);
+#endif
diff --git a/include/drivers/nxp/crypto/caam/jr_driver_config.h b/include/drivers/nxp/crypto/caam/jr_driver_config.h
new file mode 100644
index 0000000..1b3c447
--- /dev/null
+++ b/include/drivers/nxp/crypto/caam/jr_driver_config.h
@@ -0,0 +1,205 @@
+/*
+ * Copyright 2017-2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#ifndef _JR_DRIVER_CONFIG_H_
+#define _JR_DRIVER_CONFIG_H_
+
+/* Helper defines  */
+
+ /* Define used for setting a flag on  */
+#define  ON  1
+ /* Define used for setting a flag off  */
+#define  OFF 0
+
+ /* SEC is configured to start work in polling mode,  */
+#define SEC_STARTUP_POLLING_MODE     0
+/*
+ * SEC is configured to start work in interrupt mode,
+ *  when configured for NAPI notification style.
+ */
+#define SEC_STARTUP_INTERRUPT_MODE   1
+
+/*
+ * SEC driver will use ONLY interrupts to receive notifications
+ * for processed packets from SEC engine hardware.
+ */
+#define SEC_NOTIFICATION_TYPE_IRQ   1
+/*
+ * SEC driver will use ONLY polling to receive notifications
+ * for processed packets from SEC engine hardware.
+ */
+#define SEC_NOTIFICATION_TYPE_POLL  2
+
+/*
+ * Determines how SEC user space driver will receive notifications
+ * for processed packets from SEC engine.
+ * Valid values are: #SEC_NOTIFICATION_TYPE_POLL, #SEC_NOTIFICATION_TYPE_IRQ
+ */
+#define SEC_NOTIFICATION_TYPE   SEC_NOTIFICATION_TYPE_POLL
+
+ /* Maximum number of job rings supported by SEC hardware  */
+#define MAX_SEC_JOB_RINGS         1
+
+/*
+ * Size of cryptographic context that is used directly in communicating
+ *  with SEC device.
+ *  SEC device works only with physical addresses. This is the maximum size
+ *  for a SEC descriptor ( = 64 words).
+ */
+
+#define SEC_CRYPTO_DESCRIPTOR_SIZE  256
+
+/*
+ * Size of job descriptor submitted to SEC device for each packet to be
+ *  processed.
+ *  Job descriptor contains 3 DMA address pointers:
+ *      - to shared descriptor, to input buffer and to output buffer.
+ *  The job descriptor contains other SEC specific commands as well:
+ *      - HEADER command, SEQ IN PTR command SEQ OUT PTR command and opaque
+ *        data, each measuring 4 bytes.
+ *  Job descriptor size, depending on physical address representation:
+ *      - 32 bit - size is 28 bytes - cacheline-aligned size is 64 bytes
+ *      - 36 bit - size is 40 bytes - cacheline-aligned size is 64 bytes
+ *  @note: Job descriptor must be cacheline-aligned to ensure efficient memory
+ *  access.
+ *  @note: If other format is used for job descriptor, then the size must be
+ *  revised.
+ */
+
+#define SEC_JOB_DESCRIPTOR_SIZE		64
+
+/*
+ * Size of one entry in the input ring of a job ring.
+ *  Input ring contains pointers to job descriptors.
+ *  The memory used for an input ring and output ring must be physically
+ *  contiguous.
+ */
+
+#define SEC_JOB_INPUT_RING_ENTRY_SIZE	sizeof(phys_addr_t)
+
+/*
+ * Size of one entry in the output ring of a job ring.
+ *  Output ring entry is a pointer to a job descriptor followed by a 4 byte
+ *  status word.
+ *  The memory used for an input ring and output ring must be physically
+ *  contiguous.
+ *  @note If desired to use also the optional SEQ OUT indication in output
+ *  ring entries, then 4 more bytes must be added to the size.
+ */
+
+#define SEC_JOB_OUTPUT_RING_ENTRY_SIZE	(SEC_JOB_INPUT_RING_ENTRY_SIZE + 4)
+
+ /* DMA memory required for an input ring of a job ring.  */
+#define SEC_DMA_MEM_INPUT_RING_SIZE	\
+		((SEC_JOB_INPUT_RING_ENTRY_SIZE) * (SEC_JOB_RING_SIZE))
+
+/*
+ * DMA memory required for an output ring of a job ring.
+ *  Required extra 4 byte for status word per each entry.
+ */
+#define SEC_DMA_MEM_OUTPUT_RING_SIZE	\
+		((SEC_JOB_OUTPUT_RING_ENTRY_SIZE) * (SEC_JOB_RING_SIZE))
+
+ /* DMA memory required for descriptors of a job ring.  */
+#define SEC_DMA_MEM_DESCRIPTORS		\
+		((SEC_CRYPTO_DESCRIPTOR_SIZE)*(SEC_JOB_RING_SIZE))
+
+ /* DMA memory required for a job ring, including both input output rings.  */
+#define SEC_DMA_MEM_JOB_RING_SIZE	\
+		((SEC_DMA_MEM_INPUT_RING_SIZE) +	\
+		(SEC_DMA_MEM_OUTPUT_RING_SIZE))
+
+/*
+ * When calling sec_init() UA will provide an area of virtual memory
+ *  of size #SEC_DMA_MEMORY_SIZE to be  used internally by the driver
+ *  to allocate data (like SEC descriptors) that needs to be passed to
+ *  SEC device in physical addressing and later on retrieved from SEC device.
+ *  At initialization the UA provides specialized ptov/vtop functions/macros to
+ *  translate addresses allocated from this memory area.
+ */
+#define SEC_DMA_MEMORY_SIZE		\
+		((SEC_DMA_MEM_JOB_RING_SIZE) * (MAX_SEC_JOB_RINGS))
+
+/*
+ * SEC DEVICE related configuration.
+
+ * Enable/Disable logging support at compile time.
+ * Valid values:
+ * ON - enable logging
+ * OFF - disable logging
+ * The messages are logged at stdout.
+ */
+
+#define SEC_DRIVER_LOGGING OFF
+
+/*
+ * Configure logging level at compile time.
+ * Valid values:
+ * SEC_DRIVER_LOG_ERROR - log only errors
+ * SEC_DRIVER_LOG_INFO  - log errors and info messages
+ * SEC_DRIVER_LOG_DEBUG - log errors, info and debug messages
+ */
+
+#define SEC_DRIVER_LOGGING_LEVEL SEC_DRIVER_LOG_DEBUG
+
+/*
+ * SEC JOB RING related configuration.
+
+ * Configure the size of the JOB RING.
+ * The maximum size of the ring is hardware limited to 1024.
+ * However the number of packets in flight in a time interval of
+ * 1ms can be calculated
+ * from the traffic rate (Mbps) and packet size.
+ * Here it was considered a packet size of 40 bytes.
+ * @note Round up to nearest power of 2 for optimized update
+ * of producer/consumer indexes of each job ring
+ * \todo Should set to 750, according to the calculation above, but
+ * the JR size must be power of 2, thus the next closest value must
+ * be chosen (i.e. 512 since 1024 is not available)
+ * For firmware choose this to be 16
+ */
+
+#define SEC_JOB_RING_SIZE    16
+
+/*
+ * Interrupt coalescing related configuration.
+ * NOTE: SEC hardware enabled interrupt
+ * coalescing is not supported on SEC version 3.1!
+ * SEC version 4.4 has support for interrupt
+ * coalescing.
+ */
+
+#if SEC_NOTIFICATION_TYPE != SEC_NOTIFICATION_TYPE_POLL
+
+#define SEC_INT_COALESCING_ENABLE   ON
+/*
+ * Interrupt Coalescing Descriptor Count Threshold.
+ * While interrupt coalescing is enabled (ICEN=1), this value determines
+ * how many Descriptors are completed before raising an interrupt.
+ * Valid values for this field are from 0 to 255.
+ * Note that a value of 1 functionally defeats the advantages of interrupt
+ * coalescing since the threshold value is reached each time that a
+ * Job Descriptor is completed. A value of 0 is treated in the same
+ * manner as a value of 1.
+ *
+ */
+#define SEC_INTERRUPT_COALESCING_DESCRIPTOR_COUNT_THRESH  10
+
+/*
+ * Interrupt Coalescing Timer Threshold.
+ * While interrupt coalescing is enabled (ICEN=1), this value determines the
+ * maximum amount of time after processing a Descriptor before raising an
+ * interrupt.
+ * The threshold value is represented in units equal to 64 CAAM interface
+ * clocks. Valid values for this field are from 1 to 65535.
+ * A value of 0 results in behavior identical to that when interrupt
+ * coalescing is disabled.
+ */
+#define SEC_INTERRUPT_COALESCING_TIMER_THRESH  100
+#endif /* SEC_NOTIFICATION_TYPE_POLL  */
+
+#endif /* _JR_DRIVER_CONFIG_H_  */
diff --git a/include/drivers/nxp/crypto/caam/rsa.h b/include/drivers/nxp/crypto/caam/rsa.h
new file mode 100644
index 0000000..dd9ecdc
--- /dev/null
+++ b/include/drivers/nxp/crypto/caam/rsa.h
@@ -0,0 +1,40 @@
+/*
+ * Copyright 2017-2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#ifndef _RSA_H__
+#define _RSA_H__
+
+/* RSA key size defines */
+#define RSA_4K_KEY_SZ       4096
+#define RSA_4K_KEY_SZ_BYTES (RSA_4K_KEY_SZ/8)
+#define RSA_2K_KEY_SZ       2048
+#define RSA_2K_KEY_SZ_BYTES (RSA_2K_KEY_SZ/8)
+#define RSA_1K_KEY_SZ       1024
+#define RSA_1K_KEY_SZ_BYTES (RSA_1K_KEY_SZ/8)
+
+#define SHA256_BYTES        (256/8)
+
+struct pk_in_params {
+	uint8_t *e;
+	uint32_t e_siz;
+	uint8_t *n;
+	uint32_t n_siz;
+	uint8_t *a;
+	uint32_t a_siz;
+	uint8_t *b;
+	uint32_t b_siz;
+};
+
+struct rsa_context {
+	struct pk_in_params pkin;
+};
+
+int rsa_verify_signature(void *hash_ptr, unsigned int hash_len,
+			 void *sig_ptr, unsigned int sig_len,
+			 void *pk_ptr, unsigned int pk_len);
+
+#endif
diff --git a/include/drivers/nxp/crypto/caam/sec_hw_specific.h b/include/drivers/nxp/crypto/caam/sec_hw_specific.h
new file mode 100644
index 0000000..bc11aca
--- /dev/null
+++ b/include/drivers/nxp/crypto/caam/sec_hw_specific.h
@@ -0,0 +1,503 @@
+/*
+ * Copyright 2017-2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#ifndef _SEC_HW_SPECIFIC_H_
+#define _SEC_HW_SPECIFIC_H_
+
+#include "caam.h"
+#include "sec_jr_driver.h"
+
+ /* DEFINES AND MACROS */
+
+/* Used to retry resetting a job ring in SEC hardware. */
+#define SEC_TIMEOUT 100000
+
+/*
+ * Offset to the registers of a job ring.
+ *Is different for each job ring.
+ */
+#define CHAN_BASE(jr)   ((phys_addr_t)(jr)->register_base_addr)
+
+#define unlikely(x)	 __builtin_expect(!!(x), 0)
+
+#define SEC_JOB_RING_IS_FULL(pi, ci, ring_max_size, ring_threshold)    \
+	((((pi) + 1 + ((ring_max_size) - (ring_threshold))) &	\
+	  (ring_max_size - 1))  == ((ci)))
+
+#define SEC_CIRCULAR_COUNTER(x, max)   (((x) + 1) & (max - 1))
+
+ /* Struct representing various job ring registers */
+struct jobring_regs {
+#ifdef NXP_SEC_BE
+	unsigned int irba_h;
+	unsigned int irba_l;
+#else
+	unsigned int irba_l;
+	unsigned int irba_h;
+#endif
+	unsigned int rsvd1;
+	unsigned int irs;
+	unsigned int rsvd2;
+	unsigned int irsa;
+	unsigned int rsvd3;
+	unsigned int irja;
+#ifdef NXP_SEC_BE
+	unsigned int orba_h;
+	unsigned int orba_l;
+#else
+	unsigned int orba_l;
+	unsigned int orba_h;
+#endif
+	unsigned int rsvd4;
+	unsigned int ors;
+	unsigned int rsvd5;
+	unsigned int orjr;
+	unsigned int rsvd6;
+	unsigned int orsf;
+	unsigned int rsvd7;
+	unsigned int jrsta;
+	unsigned int rsvd8;
+	unsigned int jrint;
+	unsigned int jrcfg0;
+	unsigned int jrcfg1;
+	unsigned int rsvd9;
+	unsigned int irri;
+	unsigned int rsvd10;
+	unsigned int orwi;
+	unsigned int rsvd11;
+	unsigned int jrcr;
+};
+
+ /* Offsets representing common SEC Registers */
+#define SEC_REG_MCFGR_OFFSET		0x0004
+#define SEC_REG_SCFGR_OFFSET		0x000C
+#define SEC_REG_JR0ICIDR_MS_OFFSET	0x0010
+#define SEC_REG_JR0ICIDR_LS_OFFSET	0x0014
+#define SEC_REG_JR1ICIDR_MS_OFFSET	0x0018
+#define SEC_REG_JR1ICIDR_LS_OFFSET	0x001C
+#define SEC_REG_JR2ICIDR_MS_OFFSET	0x0020
+#define SEC_REG_JR2ICIDR_LS_OFFSET	0x0024
+#define SEC_REG_JR3ICIDR_MS_OFFSET	0x0028
+#define SEC_REG_JR3ICIDR_LS_OFFSET	0x002C
+#define SEC_REG_JRSTARTR_OFFSET		0x005C
+#define SEC_REG_CTPR_MS_OFFSET		0x0FA8
+
+ /* Offsets  representing various RNG registers */
+#define RNG_REG_RTMCTL_OFFSET		0x0600
+#define RNG_REG_RTSDCTL_OFFSET		0x0610
+#define RNG_REG_RTFRQMIN_OFFSET		0x0618
+#define RNG_REG_RTFRQMAX_OFFSET		0x061C
+#define RNG_REG_RDSTA_OFFSET		0x06C0
+#define ALG_AAI_SH_SHIFT		4
+
+ /* SEC Registers Bitmasks */
+#define	MCFGR_PS_SHIFT			16
+#define	MCFGR_AWCACHE_SHIFT			 8
+#define	MCFGR_AWCACHE_MASK	(0xF << MCFGR_AWCACHE_SHIFT)
+#define	MCFGR_ARCACHE_SHIFT			12
+#define	MCFGR_ARCACHE_MASK	(0xF << MCFGR_ARCACHE_SHIFT)
+
+#define SCFGR_RNGSH0		0x00000200
+#define	SCFGR_VIRT_EN		0x00008000
+
+#define JRICID_MS_LICID		0x80000000
+#define JRICID_MS_LAMTD		0x00020000
+#define JRICID_MS_AMTDT		0x00010000
+#define JRICID_MS_TZ		0x00008000
+#define JRICID_LS_SDID_MASK	0x00000FFF
+#define JRICID_LS_NSEQID_MASK	0x0FFF0000
+#define JRICID_LS_NSEQID_SHIFT		16
+#define JRICID_LS_SEQID_MASK	0x00000FFF
+
+#define JRSTARTR_STARTJR0	0x00000001
+#define JRSTARTR_STARTJR1	0x00000002
+#define JRSTARTR_STARTJR2	0x00000004
+#define JRSTARTR_STARTJR3	0x00000008
+
+#define CTPR_VIRT_EN_POR	0x00000002
+#define CTPR_VIRT_EN_INC	0x00000001
+
+ /* RNG RDSTA bitmask */
+#define RNG_STATE0_HANDLE_INSTANTIATED	0x00000001
+#define RTMCTL_PRGM 0x00010000	/* 1 -> program mode, 0 -> run mode */
+ /* use von Neumann data in both entropy shifter and statistical checker */
+#define RTMCTL_SAMP_MODE_VON_NEUMANN_ES_SC	 0
+ /* use raw data in both entropy shifter and statistical checker */
+#define RTMCTL_SAMP_MODE_RAW_ES_SC			 1
+ /* use von Neumann data in entropy shifter, raw data in statistical checker */
+#define RTMCTL_SAMP_MODE_VON_NEUMANN_ES_RAW_SC 2
+ /* invalid combination */
+#define RTMCTL_SAMP_MODE_INVALID			   3
+#define RTSDCTL_ENT_DLY_MIN	3200
+#define RTSDCTL_ENT_DLY_MAX	12800
+#define RTSDCTL_ENT_DLY_SHIFT	16
+#define RTSDCTL_ENT_DLY_MASK	(U(0xffff) << RTSDCTL_ENT_DLY_SHIFT)
+#define RTFRQMAX_DISABLE	   (1 << 20)
+
+ /* Constants for error handling on job ring */
+#define JR_REG_JRINT_ERR_TYPE_SHIFT	8
+#define JR_REG_JRINT_ERR_ORWI_SHIFT	16
+#define JR_REG_JRINIT_JRE_SHIFT			1
+
+#define JRINT_JRE			(1 << JR_REG_JRINIT_JRE_SHIFT)
+#define JRINT_ERR_WRITE_STATUS		(1 << JR_REG_JRINT_ERR_TYPE_SHIFT)
+#define JRINT_ERR_BAD_INPUT_BASE	(3 << JR_REG_JRINT_ERR_TYPE_SHIFT)
+#define JRINT_ERR_BAD_OUTPUT_BASE	(4 << JR_REG_JRINT_ERR_TYPE_SHIFT)
+#define JRINT_ERR_WRITE_2_IRBA		(5 << JR_REG_JRINT_ERR_TYPE_SHIFT)
+#define JRINT_ERR_WRITE_2_ORBA		(6 << JR_REG_JRINT_ERR_TYPE_SHIFT)
+#define JRINT_ERR_RES_B4_HALT		(7 << JR_REG_JRINT_ERR_TYPE_SHIFT)
+#define JRINT_ERR_REM_TOO_MANY		(8 << JR_REG_JRINT_ERR_TYPE_SHIFT)
+#define JRINT_ERR_ADD_TOO_MANY		(9 << JR_REG_JRINT_ERR_TYPE_SHIFT)
+#define JRINT_ERR_HALT_MASK		0x0C
+#define JRINT_ERR_HALT_INPROGRESS	0x04
+#define JRINT_ERR_HALT_COMPLETE		0x08
+
+#define JR_REG_JRCR_VAL_RESET		0x00000001
+
+#define JR_REG_JRCFG_LO_ICTT_SHIFT	0x10
+#define JR_REG_JRCFG_LO_ICDCT_SHIFT	0x08
+#define JR_REG_JRCFG_LO_ICEN_EN		0x02
+#define JR_REG_JRCFG_LO_IMSK_EN		0x01
+
+ /* Constants for Descriptor Processing errors */
+#define SEC_HW_ERR_SSRC_NO_SRC			0x00
+#define SEC_HW_ERR_SSRC_CCB_ERR			0x02
+#define SEC_HW_ERR_SSRC_JMP_HALT_U	0x03
+#define SEC_HW_ERR_SSRC_DECO		0x04
+#define SEC_HW_ERR_SSRC_JR		0x06
+#define SEC_HW_ERR_SSRC_JMP_HALT_COND   0x07
+
+#define SEC_HW_ERR_DECO_HFN_THRESHOLD   0xF1
+#define SEC_HW_ERR_CCB_ICV_CHECK_FAIL   0x0A
+
+ /* Macros for extracting error codes for the job ring */
+
+#define JR_REG_JRINT_ERR_TYPE_EXTRACT(value)			\
+				((value) & 0x00000F00)
+
+#define JR_REG_JRINT_ERR_ORWI_EXTRACT(value)			\
+				(((value) & 0x3FFF0000) >>	\
+				 JR_REG_JRINT_ERR_ORWI_SHIFT)
+
+#define JR_REG_JRINT_JRE_EXTRACT(value)				\
+				((value) & JRINT_JRE)
+
+ /* Macros for manipulating JR registers */
+typedef struct {
+#ifdef NXP_SEC_BE
+		uint32_t high;
+		uint32_t low;
+#else
+		uint32_t low;
+		uint32_t high;
+#endif
+} ptr_addr_t;
+
+#if defined(CONFIG_PHYS_64BIT)
+#define sec_read_addr(a)		sec_in64((a))
+#define sec_write_addr(a, v)	sec_out64((a), (v))
+#else
+#define sec_read_addr(a)		sec_in32((a))
+#define sec_write_addr(a, v)		sec_out32((a), (v))
+#endif
+
+#define JR_REG(name, jr)	(CHAN_BASE(jr) + JR_REG_##name##_OFFSET)
+#define JR_REG_LO(name, jr)	(CHAN_BASE(jr) + JR_REG_##name##_OFFSET_LO)
+
+#define GET_JR_REG(name, jr)	(sec_in32(JR_REG(name, (jr))))
+#define GET_JR_REG_LO(name, jr)	(sec_in32(JR_REG_LO(name, (jr))))
+
+#define SET_JR_REG(name, jr, val)		\
+		(sec_out32(JR_REG(name, (jr)), (val)))
+
+#define SET_JR_REG_LO(name, jr, val)	\
+		(sec_out32(JR_REG_LO(name, (jr)), (val)))
+
+ /* STRUCTURES AND OTHER TYPEDEFS */
+ /*  Lists the possible states for a job ring. */
+typedef enum sec_job_ring_state_e {
+	SEC_JOB_RING_STATE_STARTED,	/* Job ring is initialized */
+	SEC_JOB_RING_STATE_RESET,	/* Job ring reset is in progress */
+} sec_job_ring_state_t;
+
+struct sec_job_ring_t {
+	/*
+	 * Consumer index for job ring (jobs array).
+	 * @note: cidx and pidx are accessed from
+	 * different threads.
+	 * Place the cidx and pidx inside the structure
+	 *  so that they lay on different cachelines, to
+	 * avoid false sharing between threads when the
+	 * threads run on different cores!
+	 */
+	uint32_t cidx;
+
+	/* Producer index for job ring (jobs array) */
+	uint32_t pidx;
+
+	/*  Ring of input descriptors. Size of array is power of 2 to allow
+	 * fast update of producer/consumer indexes with  bitwise operations.
+	 */
+	phys_addr_t *input_ring;
+
+	/*  Ring of output descriptors. */
+	struct sec_outring_entry *output_ring;
+
+	/* The file descriptor used for polling for interrupts notifications */
+	uint32_t irq_fd;
+
+	/* Model used by SEC Driver to receive  notifications from SEC.
+	 *  Can be either of the three:
+	 * #SEC_NOTIFICATION_TYPE_IRQ or
+	 * #SEC_NOTIFICATION_TYPE_POLL
+	 */
+	uint32_t jr_mode;
+	/* Base address for SEC's register memory for this job ring. */
+	void *register_base_addr;
+	/* notifies if coelescing is enabled for the job ring */
+	uint8_t coalescing_en;
+	/* The state of this job ring */
+	sec_job_ring_state_t jr_state;
+};
+
+ /* Forward structure declaration */
+typedef struct sec_job_ring_t sec_job_ring_t;
+
+struct sec_outring_entry {
+	phys_addr_t desc;	/* Pointer to completed descriptor */
+	uint32_t status;	/* Status for completed descriptor */
+} __packed;
+
+ /* Lists the states possible for the SEC user space driver. */
+typedef enum sec_driver_state_e {
+	SEC_DRIVER_STATE_IDLE,	/*< Driver not initialized */
+	SEC_DRIVER_STATE_STARTED,	/*< Driver initialized and */
+	SEC_DRIVER_STATE_RELEASE,	/*< Driver release is in progress */
+} sec_driver_state_t;
+
+ /* Union describing the possible error codes that */
+ /* can be set in the descriptor status word */
+
+union hw_error_code {
+	uint32_t error;
+	union {
+		struct {
+			uint32_t ssrc:4;
+			uint32_t ssed_val:28;
+		} __packed value;
+		struct {
+			uint32_t ssrc:4;
+			uint32_t res:28;
+		} __packed no_status_src;
+		struct {
+			uint32_t ssrc:4;
+			uint32_t jmp:1;
+			uint32_t res:11;
+			uint32_t desc_idx:8;
+			uint32_t cha_id:4;
+			uint32_t err_id:4;
+		} __packed ccb_status_src;
+		struct {
+			uint32_t ssrc:4;
+			uint32_t jmp:1;
+			uint32_t res:11;
+			uint32_t desc_idx:8;
+			uint32_t offset:8;
+		} __packed jmp_halt_user_src;
+		struct {
+			uint32_t ssrc:4;
+			uint32_t jmp:1;
+			uint32_t res:11;
+			uint32_t desc_idx:8;
+			uint32_t desc_err:8;
+		} __packed deco_src;
+		struct {
+			uint32_t ssrc:4;
+			uint32_t res:17;
+			uint32_t naddr:3;
+			uint32_t desc_err:8;
+		} __packed jr_src;
+		struct {
+			uint32_t ssrc:4;
+			uint32_t jmp:1;
+			uint32_t res:11;
+			uint32_t desc_idx:8;
+			uint32_t cond:8;
+		} __packed jmp_halt_cond_src;
+	} __packed error_desc;
+} __packed;
+
+ /* FUNCTION PROTOTYPES */
+
+/*
+ * @brief Initialize a job ring/channel in SEC device.
+ * Write configuration register/s to properly initialize a job ring.
+ *
+ * @param [in] job_ring     The job ring
+ *
+ * @retval 0 for success
+ * @retval other for error
+ */
+int hw_reset_job_ring(sec_job_ring_t *job_ring);
+
+/*
+ * @brief Reset a job ring/channel in SEC device.
+ * Write configuration register/s to reset a job ring.
+ *
+ * @param [in] job_ring     The job ring
+ *
+ * @retval 0 for success
+ * @retval -1 in case job ring reset failed
+ */
+int hw_shutdown_job_ring(sec_job_ring_t *job_ring);
+
+/*
+ * @brief Handle a job ring/channel error in SEC device.
+ * Identify the error type and clear error bits if required.
+ *
+ * @param [in]  job_ring    The job ring
+ * @param [in]  sec_error_code  error code as first read from SEC engine
+ */
+
+void hw_handle_job_ring_error(sec_job_ring_t *job_ring,
+			      uint32_t sec_error_code);
+/*
+ * @brief Handle a job ring error in the device.
+ * Identify the error type and printout a explanatory
+ * messages.
+ *
+ * @param [in]  job_ring    The job ring
+ *
+ */
+
+int hw_job_ring_error(sec_job_ring_t *job_ring);
+
+/* @brief Set interrupt coalescing parameters on the Job Ring.
+ * @param [in]  job_ring       The job ring
+ * @param [in]  irq_coalesing_timer
+ *                             Interrupt coalescing timer threshold.
+ *                     This value determines the maximum
+ *                     amount of time after processing a descriptor
+ *                     before raising an interrupt.
+ * @param [in]  irq_coalescing_count
+ *                             Interrupt coalescing count threshold.
+ *                     This value determines how many descriptors
+ *                     are completed before raising an interrupt.
+ */
+
+int hw_job_ring_set_coalescing_param(sec_job_ring_t *job_ring,
+				     uint16_t irq_coalescing_timer,
+				     uint8_t irq_coalescing_count);
+
+/* @brief Enable interrupt coalescing on a job ring
+ * @param [in]  job_ring       The job ring
+ */
+
+int hw_job_ring_enable_coalescing(sec_job_ring_t *job_ring);
+
+/*
+ * @brief Disable interrupt coalescing on a job ring
+ * @param [in]  job_ring       The job ring
+ */
+
+int hw_job_ring_disable_coalescing(sec_job_ring_t *job_ring);
+
+/*
+ * @brief Poll the HW for already processed jobs in the JR
+ * and notify the available jobs to UA.
+ *
+ * @param [in]  job_ring            The job ring to poll.
+ * @param [in]  limit               The maximum number of jobs to notify.
+ *                                  If set to negative value, all available
+ *                                  jobs are notified.
+ *
+ * @retval >=0 for No of jobs notified to UA.
+ * @retval -1 for error
+ */
+
+int hw_poll_job_ring(struct sec_job_ring_t *job_ring, int32_t limit);
+
+/* @brief Poll the HW for already processed jobs in the JR
+ * and silently discard the available jobs or notify them to UA
+ * with indicated error code.
+
+ * @param [in,out]  job_ring        The job ring to poll.
+ * @param [in]  do_notify           Can be #TRUE or #FALSE.
+ *                                 Indicates if descriptors to be discarded
+ *                                  or notified to UA with given error_code.
+ * @param [in]  error_code          The detailed SEC error code.
+ * @param [out] notified_descs        Number of notified descriptors.
+ *                                 Can be NULL if do_notify is #FALSE
+ */
+void hw_flush_job_ring(struct sec_job_ring_t *job_ring,
+		       uint32_t do_notify,
+		       uint32_t error_code, uint32_t *notified_descs);
+
+/*
+ * @brief Flush job rings of any processed descs.
+ * The processed descs are silently dropped,
+ *  WITHOUT being notified to UA.
+ */
+void flush_job_rings(void);
+
+/*
+ * @brief Handle desc that generated error in SEC engine.
+ * Identify the exact type of error and handle the error.
+ * Depending on the error type, the job ring could be reset.
+ * All descs that are submitted for processing on this job ring
+ * are notified to User Application with error status and detailed error code.
+
+ * @param [in]  job_ring            Job ring
+ * @param [in]  sec_error_code      Error code read from job ring's Channel
+ *                                 Status Register
+ * @param [out] notified_descs      Number of notified descs. Can be NULL if
+ *                                 do_notify is #FALSE
+ * @param [out] do_driver_shutdown  If set to #TRUE, then UA is returned code
+ *                                 #SEC_PROCESSING_ERROR
+ *                                  which is indication that UA must call
+ *                                  sec_release() after this.
+ */
+void sec_handle_desc_error(struct sec_job_ring_t *job_ring,
+			   uint32_t sec_error_code,
+			   uint32_t *notified_descs,
+			   uint32_t *do_driver_shutdown);
+
+/*
+ * @brief Release the software and hardware resources tied to a job ring.
+ * @param [in] job_ring The job ring
+ * @retval  0 for success
+ * @retval  -1 for error
+ */
+int shutdown_job_ring(struct sec_job_ring_t *job_ring);
+
+/*
+ * @brief Enable irqs on associated job ring.
+ * @param [in] job_ring The job ring
+ * @retval  0 for success
+ * @retval  -1 for error
+ */
+int jr_enable_irqs(struct sec_job_ring_t *job_ring);
+
+/*
+ * @brief Disable irqs on associated job ring.
+ * @param [in] job_ring The job ring
+ * @retval  0 for success
+ * @retval  -1 for error
+ */
+int jr_disable_irqs(struct sec_job_ring_t *job_ring);
+
+ /*
+  * IRJA - Input Ring Jobs Added Register shows
+  * how many new jobs were added to the Input Ring.
+  */
+static inline void hw_enqueue_desc_on_job_ring(struct jobring_regs *regs,
+					       int num)
+{
+	sec_out32(&regs->irja, num);
+}
+
+#endif /* _SEC_HW_SPECIFIC_H_ */
diff --git a/include/drivers/nxp/crypto/caam/sec_jr_driver.h b/include/drivers/nxp/crypto/caam/sec_jr_driver.h
new file mode 100644
index 0000000..a6570d8
--- /dev/null
+++ b/include/drivers/nxp/crypto/caam/sec_jr_driver.h
@@ -0,0 +1,178 @@
+/*
+ * Copyright 2017-2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#ifndef _JR_DRIVER_H_
+#define _JR_DRIVER_H_
+
+#include "jr_driver_config.h"
+
+/* The maximum size of a SEC descriptor, in WORDs (32 bits). */
+#define MAX_DESC_SIZE_WORDS		64
+
+#define CAAM_TIMEOUT   200000	/* ms */
+
+/* Return codes for JR user space driver APIs */
+typedef enum sec_return_code_e {
+	SEC_SUCCESS = 0,
+	SEC_INVALID_INPUT_PARAM,
+	SEC_OUT_OF_MEMORY,
+	SEC_DESCRIPTOR_IN_FLIGHT,
+	SEC_LAST_DESCRIPTOR_IN_FLIGHT,
+	SEC_PROCESSING_ERROR,
+	SEC_DESC_PROCESSING_ERROR,
+	SEC_JR_IS_FULL,
+	SEC_DRIVER_RELEASE_IN_PROGRESS,
+	SEC_DRIVER_ALREADY_INITIALIZED,
+	SEC_DRIVER_NOT_INITIALIZED,
+	SEC_JOB_RING_RESET_IN_PROGRESS,
+	SEC_RESET_ENGINE_FAILED,
+	SEC_ENABLE_IRQS_FAILED,
+	SEC_DISABLE_IRQS_FAILED,
+	SEC_RETURN_CODE_MAX_VALUE,
+} sec_return_code_t;
+
+/* STRUCTURES AND OTHER TYPEDEFS */
+
+/*
+ * @brief Function called by JR User Space driver to notify every processed
+ *         descriptor.
+ *
+ * Callback provided by the User Application.
+ * Callback is invoked by JR User Space driver for each descriptor processed by
+ * SEC
+ * @param [in] status          Status word indicating processing result for
+ *                                this descriptor.
+ * @param [in] arg               Opaque data passed by User Application
+ *                                It is opaque from JR driver's point of view.
+ * @param [in] job_ring           The job ring handle on which the processed
+ *                               descriptor word was enqueued
+ */
+typedef void (*user_callback) (uint32_t *desc, uint32_t status,
+			       void *arg, void *job_ring);
+
+/*
+ * Structure encompassing a job descriptor which is to be processed
+ * by SEC. User should also initialise this structure with the callback
+ * function pointer which will be called by driver after receiving proccessed
+ * descriptor from SEC. User data is also passed in this data structure which
+ * will be sent as an argument to the user callback function.
+ */
+struct job_descriptor {
+	uint32_t desc[MAX_DESC_SIZE_WORDS];
+	void *arg;
+	user_callback callback;
+};
+
+/*
+ * @brief Initialize the JR User Space driver.
+ * This function will handle initialization of sec library
+ * along with registering platform specific callbacks,
+ * as well as local data initialization.
+ * Call once during application startup.
+ * @note Global SEC initialization is done in SEC kernel driver.
+ * @note The hardware IDs of the initialized Job Rings are opaque to the UA.
+ * The exact Job Rings used by this library are decided between SEC user
+ * space driver and SEC kernel driver. A static partitioning of Job Rings is
+ * assumed, configured in DTS(device tree specification) file.
+ * @param [in] platform_cb     Registering the platform specific
+ *                             callbacks with driver
+ * @retval ::0                 for successful execution
+ * @retval ::-1                failure
+ */
+int sec_jr_lib_init(void);
+
+/*
+ * @brief Initialize the software and hardware resources tied to a job ring.
+ * @param [in] jr_mode;        Model to be used by SEC Driver to receive
+ *                             notifications from SEC.  Can be either
+ *                             SEC_NOTIFICATION_TYPE_IRQ or
+ *                             SEC_NOTIFICATION_TYPE_POLL
+ * @param [in] irq_coalescing_timer This value determines the maximum
+ *                                     amount of time after processing a
+ *                                     descriptor before raising an interrupt.
+ * @param [in] irq_coalescing_count This value determines how many
+ *                                     descriptors are completed before
+ *                                     raising an interrupt.
+ * @param [in] reg_base_addr   The job ring base address register
+ * @param [in] irq_id          The job ring interrupt identification number.
+ * @retval  job_ring_handle for successful job ring configuration
+ * @retval  NULL on error
+ */
+void *init_job_ring(uint8_t jr_mode,
+		    uint16_t irq_coalescing_timer,
+		    uint8_t irq_coalescing_count,
+		    void *reg_base_addr, uint32_t irq_id);
+
+/*
+ * @brief Release the resources used by the JR User Space driver.
+ * Reset and release SEC's job rings indicated by the User Application at
+ * init_job_ring() and free any memory allocated internally.
+ * Call once during application tear down.
+ * @note In case there are any descriptors in-flight (descriptors received by
+ * JR driver for processing and for which no response was yet provided to UA),
+ * the descriptors are discarded without any notifications to User Application.
+ * @retval ::0                 is returned for a successful execution
+ * @retval ::-1                is returned if JR driver release is in progress
+ */
+int sec_release(void);
+
+/*
+ * @brief Submit a descriptor for SEC processing.
+ * This function creates a "job" which is meant to instruct SEC HW
+ * to perform the processing on the input buffer. The "job" is enqueued
+ * in the Job Ring associated. The function will return after the "job"
+ * enqueue is finished. The function will not wait for SEC to
+ * start or/and finish the "job" processing.
+ * After the processing is finished the SEC HW writes the processing result
+ * to the provided output buffer.
+ * The Caller must poll JR driver using jr_dequeue()
+ * to receive notifications of the processing completion
+ * status. The notifications are received by caller by means of callback
+ * (see ::user_callback).
+ * @param [in]  job_ring_handle   The handle of the job ring on which
+ *                                descriptor is to be enqueued
+ * @param [in]  job_descriptor    The job descriptor structure of type
+ *                                struct job_descriptor. This structure
+ *                                should be filled with job descriptor along
+ *                                with callback function to be called after
+ *                                processing of descriptor and some
+ *                                opaque data passed to be passed to the
+ *                                callback function
+ *
+ * @retval ::0                 is returned for successful execution
+ * @retval ::-1                is returned if there is some enqueue failure
+ */
+int enq_jr_desc(void *job_ring_handle, struct job_descriptor *jobdescr);
+
+/*
+ * @brief Polls for available descriptors processed by SEC on a specific
+ * Job Ring
+ * This function polls the SEC Job Rings and delivers processed descriptors
+ * Each processed descriptor has a user_callback registered.
+ * This user_callback is invoked for each processed descriptor.
+ * The polling is stopped when "limit" descriptors are notified or when
+ * there are no more descriptors to notify.
+ * @note The dequeue_jr() API cannot be called from within a user_callback
+ * function
+ * @param [in]  job_ring_handle    The Job Ring handle.
+ * @param [in]  limit              This value represents the maximum number
+ *                                 of processed descriptors that can be
+ *                                 notified API call on this Job Ring.
+ *                                 Note that fewer descriptors may be notified
+ *                                 if enough processed descriptors are not
+ *                                 available.
+ *                                 If limit has a negative value, then all
+ *                                 ready descriptors will be notified.
+ *
+ * @retval :: >=0                  is returned where retval is the total
+ *                                 Number of descriptors notified
+ *                                 during this function call.
+ * @retval :: -1                   is returned in case of some error
+ */
+int dequeue_jr(void *job_ring_handle, int32_t limit);
+
+#endif /* _JR_DRIVER_H_  */
diff --git a/include/drivers/nxp/csu/csu.h b/include/drivers/nxp/csu/csu.h
new file mode 100644
index 0000000..83f1834
--- /dev/null
+++ b/include/drivers/nxp/csu/csu.h
@@ -0,0 +1,42 @@
+/*
+ * Copyright 2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#ifndef CSU_H
+#define CSU_H
+
+#define CSU_SEC_ACCESS_REG_OFFSET	(0x0021CU)
+/* Bit mask */
+#define TZASC_BYPASS_MUX_DISABLE        (0x4U)
+
+/* Macros defining access permissions to configure
+ * the regions controlled by Central Security Unit.
+ */
+enum csu_cslx_access {
+	CSU_NS_SUP_R = (0x8U),
+	CSU_NS_SUP_W = (0x80U),
+	CSU_NS_SUP_RW = (0x88U),
+	CSU_NS_USER_R = (0x4U),
+	CSU_NS_USER_W = (0x40U),
+	CSU_NS_USER_RW = (0x44U),
+	CSU_S_SUP_R = (0x2U),
+	CSU_S_SUP_W = (0x20U),
+	CSU_S_SUP_RW = (0x22U),
+	CSU_S_USER_R = (0x1U),
+	CSU_S_USER_W = (0x10U),
+	CSU_S_USER_RW = (0x11U),
+	CSU_ALL_RW = (0xffU),
+};
+
+struct csu_ns_dev_st {
+	uintptr_t ind;
+	uint32_t val;
+};
+
+void enable_layerscape_ns_access(struct csu_ns_dev_st *csu_ns_dev,
+				 uint32_t num, uintptr_t nxp_csu_addr);
+
+#endif
diff --git a/include/drivers/nxp/dcfg/dcfg.h b/include/drivers/nxp/dcfg/dcfg.h
new file mode 100644
index 0000000..ee8f866
--- /dev/null
+++ b/include/drivers/nxp/dcfg/dcfg.h
@@ -0,0 +1,103 @@
+/*
+ * Copyright 2018-2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#ifndef DCFG_H
+#define DCFG_H
+
+#include <endian.h>
+
+#if defined(CONFIG_CHASSIS_2)
+#include <dcfg_lsch2.h>
+#elif defined(CONFIG_CHASSIS_3_2) || defined(CONFIG_CHASSIS_3)
+#include <dcfg_lsch3.h>
+#endif
+
+#ifdef NXP_GUR_BE
+#define gur_in32(a)		bswap32(mmio_read_32((uintptr_t)(a)))
+#define gur_out32(a, v)		mmio_write_32((uintptr_t)(a), bswap32(v))
+#elif defined(NXP_GUR_LE)
+#define gur_in32(a)		mmio_read_32((uintptr_t)(a))
+#define gur_out32(a, v)		mmio_write_32((uintptr_t)(a), v)
+#else
+#error Please define CCSR GUR register endianness
+#endif
+
+typedef struct {
+	union {
+		uint32_t val;
+		struct {
+			uint32_t min_ver:4;
+			uint32_t maj_ver:4;
+#if defined(CONFIG_CHASSIS_3) || defined(CONFIG_CHASSIS_3_2)
+			uint32_t personality:6;
+			uint32_t rsv1:2;
+#elif defined(CONFIG_CHASSIS_2)
+			uint32_t personality:8;
+
+#endif
+#if defined(CONFIG_CHASSIS_3) || defined(CONFIG_CHASSIS_3_2)
+			uint32_t dev_id:6;
+			uint32_t rsv2:2;
+			uint32_t family:4;
+#elif defined(CONFIG_CHASSIS_2)
+			uint32_t dev_id:12;
+#endif
+			uint32_t mfr_id;
+		} __packed bf;
+		struct {
+			uint32_t maj_min:8;
+			uint32_t version; /* SoC version without major and minor info */
+		} __packed bf_ver;
+	} __packed svr_reg;
+	bool sec_enabled;
+	bool is_populated;
+} soc_info_t;
+
+typedef struct {
+	bool is_populated;
+	uint8_t ocram_present;
+	uint8_t ddrc1_present;
+#if defined(CONFIG_CHASSIS_3) || defined(CONFIG_CHASSIS_3_2)
+	uint8_t ddrc2_present;
+#endif
+} devdisr5_info_t;
+
+typedef struct {
+	uint32_t porsr1;
+	uintptr_t g_nxp_dcfg_addr;
+	unsigned long nxp_sysclk_freq;
+	unsigned long nxp_ddrclk_freq;
+	unsigned int nxp_plat_clk_divider;
+} dcfg_init_info_t;
+
+
+struct sysinfo {
+	unsigned long freq_platform;
+	unsigned long freq_ddr_pll0;
+	unsigned long freq_ddr_pll1;
+};
+
+int get_clocks(struct sysinfo *sys);
+
+/* Read the PORSR1 register */
+uint32_t read_reg_porsr1(void);
+
+/*******************************************************************************
+ * Returns true if secur eboot is enabled on board
+ * mode = 0  (development mode - sb_en = 1)
+ * mode = 1 (production mode - ITS = 1)
+ ******************************************************************************/
+bool check_boot_mode_secure(uint32_t *mode);
+
+const soc_info_t *get_soc_info(void);
+const devdisr5_info_t *get_devdisr5_info(void);
+
+void dcfg_init(dcfg_init_info_t *dcfg_init_data);
+bool is_sec_enabled(void);
+
+void error_handler(int error_code);
+#endif /*	DCFG_H	*/
diff --git a/include/drivers/nxp/dcfg/dcfg_lsch2.h b/include/drivers/nxp/dcfg/dcfg_lsch2.h
new file mode 100644
index 0000000..bdef6de
--- /dev/null
+++ b/include/drivers/nxp/dcfg/dcfg_lsch2.h
@@ -0,0 +1,85 @@
+/*
+ * Copyright 2020-2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#ifndef DCFG_LSCH2_H
+#define DCFG_LSCH2_H
+
+/* dcfg block register offsets and bitfields */
+#define DCFG_PORSR1_OFFSET		0x00
+#define DCFG_DEVDISR1_OFFSET		0x070
+#define DCFG_DEVDISR2_OFFSET		0x074
+#define DCFG_DEVDISR3_OFFSET		0x078
+#define DCFG_DEVDISR4_OFFSET		0x07C
+#define DCFG_DEVDISR5_OFFSET		0x080
+#define DCFG_COREDISR_OFFSET		0x094
+#define RCWSR0_OFFSET			0x100
+#define RCWSR5_OFFSET			0x118
+#define DCFG_BOOTLOCPTRL_OFFSET		0x400
+#define DCFG_BOOTLOCPTRH_OFFSET		0x404
+#define DCFG_COREDISABLEDSR_OFFSET	0x990
+#define DCFG_SCRATCH4_OFFSET		0x20C
+#define DCFG_SVR_OFFSET			0x0A4
+#define DCFG_BRR_OFFSET			0x0E4
+
+#define DCFG_RSTCR_OFFSET		0x0B0
+#define RSTCR_RESET_REQ			0x2
+
+#define DCFG_RSTRQSR1_OFFSET		0x0C8
+#define DCFG_RSTRQMR1_OFFSET		0x0C0
+
+/* PORSR1 bit mask */
+#define PORSR1_RCW_MASK			0xff800000
+#define PORSR1_RCW_SHIFT		23
+
+/* DCFG DCSR Macros */
+#define DCFG_DCSR_PORCR1_OFFSET		0x0
+
+#define SVR_MFR_ID_MASK			0xF0000000
+#define SVR_MFR_ID_SHIFT		28
+#define SVR_DEV_ID_MASK			0xFFF0000
+#define SVR_DEV_ID_SHIFT		16
+#define SVR_PERSONALITY_MASK		0xFF00
+#define SVR_PERSONALITY_SHIFT		8
+#define SVR_SEC_MASK			0x100
+#define SVR_SEC_SHIFT			8
+#define SVR_MAJ_VER_MASK		0xF0
+#define SVR_MAJ_VER_SHIFT		4
+#define SVR_MIN_VER_MASK		0xF
+#define SVR_MINOR_VER_0			0x00
+#define SVR_MINOR_VER_1			0x01
+
+#define DISR5_DDRC1_MASK		0x1
+#define DISR5_OCRAM_MASK		0x40
+
+/* DCFG registers bit masks */
+#define RCWSR0_SYS_PLL_RAT_SHIFT	25
+#define RCWSR0_SYS_PLL_RAT_MASK		0x1f
+#define RCWSR0_MEM_PLL_RAT_SHIFT	16
+#define RCWSR0_MEM_PLL_RAT_MASK		0x3f
+#define RCWSR0_MEM2_PLL_RAT_SHIFT	18
+#define RCWSR0_MEM2_PLL_RAT_MASK	0x3f
+
+#define RCWSR_SB_EN_OFFSET		RCWSR5_OFFSET
+#define RCWSR_SBEN_MASK			0x1
+#define RCWSR_SBEN_SHIFT		21
+
+/* RCW SRC NAND */
+#define RCW_SRC_NAND_MASK		(0x100)
+#define RCW_SRC_NAND_VAL		(0x100)
+#define NAND_RESERVED_MASK		(0xFC)
+#define NAND_RESERVED_1			(0x0)
+#define NAND_RESERVED_2			(0x80)
+
+/* RCW SRC NOR */
+#define RCW_SRC_NOR_MASK		(0x1F0)
+#define NOR_8B_VAL			(0x10)
+#define NOR_16B_VAL			(0x20)
+#define SD_VAL				(0x40)
+#define QSPI_VAL1			(0x44)
+#define QSPI_VAL2			(0x45)
+
+#endif /*	DCFG_LSCH2_H	*/
diff --git a/include/drivers/nxp/dcfg/dcfg_lsch3.h b/include/drivers/nxp/dcfg/dcfg_lsch3.h
new file mode 100644
index 0000000..cde86fe
--- /dev/null
+++ b/include/drivers/nxp/dcfg/dcfg_lsch3.h
@@ -0,0 +1,80 @@
+/*
+ * Copyright 2020-2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#ifndef DCFG_LSCH3_H
+#define DCFG_LSCH3_H
+
+/* dcfg block register offsets and bitfields */
+#define DCFG_PORSR1_OFFSET			0x00
+
+#define DCFG_DEVDISR1_OFFSET			0x70
+#define DCFG_DEVDISR1_SEC	(1 << 22)
+
+#define DCFG_DEVDISR2_OFFSET			0x74
+
+#define DCFG_DEVDISR3_OFFSET			0x78
+#define DCFG_DEVDISR3_QBMAIN	(1 << 12)
+
+#define DCFG_DEVDISR4_OFFSET			0x7C
+#define DCFG_DEVDISR4_SPI_QSPI	(1 << 4 | 1 << 5)
+
+#define DCFG_DEVDISR5_OFFSET			0x80
+#define DISR5_DDRC1_MASK	0x1
+#define DISR5_DDRC2_MASK	0x2
+#define DISR5_OCRAM_MASK	0x1000
+#define DEVDISR5_MASK_ALL_MEM	0x00001003
+#define DEVDISR5_MASK_DDR	0x00000003
+#define DEVDISR5_MASK_DBG	0x00000400
+
+#define DCFG_DEVDISR6_OFFSET			0x84
+//#define DEVDISR6_MASK             0x00000001
+
+#define DCFG_COREDISR_OFFSET			0x94
+
+#define DCFG_SVR_OFFSET				0x0A4
+#define SVR_MFR_ID_MASK		0xF0000000
+#define SVR_MFR_ID_SHIFT	28
+#define SVR_FAMILY_MASK		0xF000000
+#define SVR_FAMILY_SHIFT	24
+#define SVR_DEV_ID_MASK		0x3F0000
+#define SVR_DEV_ID_SHIFT	16
+#define SVR_PERSONALITY_MASK	0x3E00
+#define SVR_PERSONALITY_SHIFT	9
+#define SVR_SEC_MASK		0x100
+#define SVR_SEC_SHIFT		8
+#define SVR_MAJ_VER_MASK	0xF0
+#define SVR_MAJ_VER_SHIFT	4
+#define SVR_MIN_VER_MASK	0xF
+
+#define RCWSR0_OFFSET				0x100
+#define RCWSR0_SYS_PLL_RAT_SHIFT	2
+#define RCWSR0_SYS_PLL_RAT_MASK		0x1f
+#define RCWSR0_MEM_PLL_RAT_SHIFT	10
+#define RCWSR0_MEM_PLL_RAT_MASK		0x3f
+#define RCWSR0_MEM2_PLL_RAT_SHIFT	18
+#define RCWSR0_MEM2_PLL_RAT_MASK	0x3f
+
+#define RCWSR5_OFFSET				0x110
+#define RCWSR9_OFFSET				0x120
+#define RCWSR_SB_EN_OFFSET	RCWSR9_OFFSET
+#define RCWSR_SBEN_MASK		0x1
+#define RCWSR_SBEN_SHIFT	10
+
+#define RCW_SR27_OFFSET				0x168
+/* DCFG register to dump error code */
+#define DCFG_SCRATCH4_OFFSET			0x20C
+#define DCFG_SCRATCHRW5_OFFSET			0x210
+#define DCFG_SCRATCHRW6_OFFSET			0x214
+#define DCFG_SCRATCHRW7_OFFSET			0x218
+#define DCFG_BOOTLOCPTRL_OFFSET			0x400
+#define DCFG_BOOTLOCPTRH_OFFSET			0x404
+#define DCFG_COREDISABLEDSR_OFFSET		0x990
+
+/* Reset module bit field */
+#define RSTCR_RESET_REQ         0x2
+
+#endif /*	DCFG_LSCH3_H	*/
diff --git a/include/drivers/nxp/dcfg/scfg.h b/include/drivers/nxp/dcfg/scfg.h
new file mode 100644
index 0000000..8067de1
--- /dev/null
+++ b/include/drivers/nxp/dcfg/scfg.h
@@ -0,0 +1,65 @@
+/*
+ * Copyright 2020-2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#ifndef SCFG_H
+#define SCFG_H
+
+#ifdef CONFIG_CHASSIS_2
+
+/* SCFG register offsets */
+#define SCFG_CORE0_SFT_RST_OFFSET	0x0130
+#define SCFG_SNPCNFGCR_OFFSET		0x01A4
+#define SCFG_CORESRENCR_OFFSET		0x0204
+#define SCFG_RVBAR0_0_OFFSET		0x0220
+#define SCFG_RVBAR0_1_OFFSET		0x0224
+#define SCFG_COREBCR_OFFSET		0x0680
+#define SCFG_RETREQCR_OFFSET		0x0424
+
+#define SCFG_COREPMCR_OFFSET		0x042C
+#define COREPMCR_WFIL2			0x1
+
+#define SCFG_GIC400_ADDR_ALIGN_OFFSET	0x0188
+#define SCFG_BOOTLOCPTRH_OFFSET		0x0600
+#define SCFG_BOOTLOCPTRL_OFFSET		0x0604
+#define SCFG_SCRATCHRW2_OFFSET		0x0608
+#define SCFG_SCRATCHRW3_OFFSET		0x060C
+
+/* SCFG bit fields */
+#define SCFG_SNPCNFGCR_SECRDSNP		0x80000000
+#define SCFG_SNPCNFGCR_SECWRSNP		0x40000000
+
+/* GIC Address Align Register */
+#define SCFG_GIC400_ADDR_ALIGN_4KMODE_MASK	0x80000000
+#define SCFG_GIC400_ADDR_ALIGN_4KMODE_EN	0x80000000
+#define SCFG_GIC400_ADDR_ALIGN_4KMODE_DIS	0x0
+
+#endif /* CONFIG_CHASSIS_2 */
+
+#ifndef __ASSEMBLER__
+#include <endian.h>
+#include <lib/mmio.h>
+
+#ifdef NXP_SCFG_BE
+#define scfg_in32(a)		bswap32(mmio_read_32((uintptr_t)(a)))
+#define scfg_out32(a, v)	mmio_write_32((uintptr_t)(a), bswap32(v))
+#define scfg_setbits32(a, v)	mmio_setbits_32((uintptr_t)(a), v)
+#define scfg_clrbits32(a, v)	mmio_clrbits_32((uintptr_t)(a), v)
+#define scfg_clrsetbits32(a, clear, set)	\
+				mmio_clrsetbits_32((uintptr_t)(a), clear, set)
+#elif defined(NXP_SCFG_LE)
+#define scfg_in32(a)		mmio_read_32((uintptr_t)(a))
+#define scfg_out32(a, v)	mmio_write_32((uintptr_t)(a), v)
+#define scfg_setbits32(a, v)	mmio_setbits_32((uintptr_t)(a), v)
+#define scfg_clrbits32(a, v)	mmio_clrbits_32((uintptr_t)(a), v)
+#define scfg_clrsetbits32(a, clear, set)	\
+				mmio_clrsetbits_32((uintptr_t)(a), clear, set)
+#else
+#error Please define CCSR SCFG register endianness
+#endif
+#endif	/*	__ASSEMBLER__	*/
+
+#endif	/* SCFG_H */
diff --git a/include/drivers/nxp/ddr/ddr.h b/include/drivers/nxp/ddr/ddr.h
new file mode 100644
index 0000000..0ef2870
--- /dev/null
+++ b/include/drivers/nxp/ddr/ddr.h
@@ -0,0 +1,151 @@
+/*
+ * Copyright 2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#ifndef DDR_H
+#define DDR_H
+
+#include "ddr_io.h"
+#include "dimm.h"
+#include "immap.h"
+
+#ifndef DDRC_NUM_CS
+#define DDRC_NUM_CS 4
+#endif
+
+/*
+ * This is irrespective of what is the number of DDR controller,
+ * number of DIMM used. This is set to maximum
+ * Max controllers = 2
+ * Max num of DIMM per controlle = 2
+ * MAX NUM CS = 4
+ * Not to be changed.
+ */
+#define MAX_DDRC_NUM	2
+#define MAX_DIMM_NUM	2
+#define MAX_CS_NUM	4
+
+#include "opts.h"
+#include "regs.h"
+#include "utility.h"
+
+#ifdef DDR_DEBUG
+#define debug(...) INFO(__VA_ARGS__)
+#else
+#define debug(...) VERBOSE(__VA_ARGS__)
+#endif
+
+#ifndef DDRC_NUM_DIMM
+#define DDRC_NUM_DIMM 1
+#endif
+
+#define CONFIG_CS_PER_SLOT \
+	(DDRC_NUM_CS / DDRC_NUM_DIMM)
+
+/* Record of register values computed */
+struct ddr_cfg_regs {
+	struct {
+		unsigned int bnds;
+		unsigned int config;
+		unsigned int config_2;
+	} cs[MAX_CS_NUM];
+	unsigned int dec[10];
+	unsigned int timing_cfg[10];
+	unsigned int sdram_cfg[3];
+	unsigned int sdram_mode[16];
+	unsigned int md_cntl;
+	unsigned int interval;
+	unsigned int data_init;
+	unsigned int clk_cntl;
+	unsigned int init_addr;
+	unsigned int init_ext_addr;
+	unsigned int zq_cntl;
+	unsigned int wrlvl_cntl[3];
+	unsigned int ddr_sr_cntr;
+	unsigned int sdram_rcw[6];
+	unsigned int dq_map[4];
+	unsigned int eor;
+	unsigned int cdr[2];
+	unsigned int err_disable;
+	unsigned int err_int_en;
+	unsigned int tx_cfg[4];
+	unsigned int debug[64];
+};
+
+struct ddr_conf {
+	int dimm_in_use[MAX_DIMM_NUM];
+	int cs_in_use;	/* bitmask, bit 0 for cs0, bit 1 for cs1, etc. */
+	int cs_on_dimm[MAX_DIMM_NUM];	/* bitmask */
+	unsigned long long cs_base_addr[MAX_CS_NUM];
+	unsigned long long cs_size[MAX_CS_NUM];
+	unsigned long long base_addr;
+	unsigned long long total_mem;
+};
+
+struct ddr_info {
+	unsigned long clk;
+	unsigned long long mem_base;
+	unsigned int num_ctlrs;
+	unsigned int dimm_on_ctlr;
+	struct dimm_params dimm;
+	struct memctl_opt opt;
+	struct ddr_conf conf;
+	struct ddr_cfg_regs ddr_reg;
+	struct ccsr_ddr *ddr[MAX_DDRC_NUM];
+	uint16_t *phy[MAX_DDRC_NUM];
+	int *spd_addr;
+	unsigned int ip_rev;
+	uintptr_t phy_gen2_fw_img_buf;
+	void *img_loadr;
+	int warm_boot_flag;
+};
+
+struct rc_timing {
+	unsigned int speed_bin;
+	unsigned int clk_adj;
+	unsigned int wrlvl;
+};
+
+struct board_timing {
+	unsigned int rc;
+	struct rc_timing const *p;
+	unsigned int add1;
+	unsigned int add2;
+};
+
+enum warm_boot {
+	DDR_COLD_BOOT = 0,
+	DDR_WARM_BOOT = 1,
+	DDR_WRM_BOOT_NT_SUPPORTED = -1,
+};
+
+int disable_unused_ddrc(struct ddr_info *priv, int mask,
+			uintptr_t nxp_ccn_hn_f0_addr);
+int ddr_board_options(struct ddr_info *priv);
+int compute_ddrc(const unsigned long clk,
+		 const struct memctl_opt *popts,
+		 const struct ddr_conf *conf,
+		 struct ddr_cfg_regs *ddr,
+		 const struct dimm_params *dimm_params,
+		 const unsigned int ip_rev);
+int compute_ddr_phy(struct ddr_info *priv);
+int ddrc_set_regs(const unsigned long clk,
+		  const struct ddr_cfg_regs *regs,
+		  const struct ccsr_ddr *ddr,
+		  int twopass);
+int cal_board_params(struct ddr_info *priv,
+		     const struct board_timing *dimm,
+		     int len);
+/* return bit mask of used DIMM(s) */
+int ddr_get_ddr_params(struct dimm_params *pdimm, struct ddr_conf *conf);
+long long dram_init(struct ddr_info *priv
+#if defined(NXP_HAS_CCN504) || defined(NXP_HAS_CCN508)
+		    , uintptr_t nxp_ccn_hn_f0_addr
+#endif
+		);
+long long board_static_ddr(struct ddr_info *info);
+
+#endif	/* DDR_H */
diff --git a/include/drivers/nxp/ddr/ddr_io.h b/include/drivers/nxp/ddr/ddr_io.h
new file mode 100644
index 0000000..fbd7e97
--- /dev/null
+++ b/include/drivers/nxp/ddr/ddr_io.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright 2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#ifndef DDR_IO_H
+#define DDR_IO_H
+
+#include <endian.h>
+
+#include <lib/mmio.h>
+
+#define min(a, b)  (((a) > (b)) ? (b) : (a))
+
+#define max(a, b)  (((a) > (b)) ? (a) : (b))
+
+/* macro for memory barrier */
+#define mb()		asm volatile("dsb sy" : : : "memory")
+
+#ifdef NXP_DDR_BE
+#define ddr_in32(a)			bswap32(mmio_read_32((uintptr_t)(a)))
+#define ddr_out32(a, v)			mmio_write_32((uintptr_t)(a),\
+							bswap32(v))
+#elif defined(NXP_DDR_LE)
+#define ddr_in32(a)			mmio_read_32((uintptr_t)(a))
+#define ddr_out32(a, v)			mmio_write_32((uintptr_t)(a), v)
+#else
+#error Please define CCSR DDR register endianness
+#endif
+
+#define ddr_setbits32(a, v)		ddr_out32((a), ddr_in32(a) | (v))
+#define ddr_clrbits32(a, v)		ddr_out32((a), ddr_in32(a) & ~(v))
+#define ddr_clrsetbits32(a, c, s)	ddr_out32((a), (ddr_in32(a) & ~(c)) \
+						  | (s))
+
+#endif /*	DDR_IO_H	*/
diff --git a/include/drivers/nxp/ddr/dimm.h b/include/drivers/nxp/ddr/dimm.h
new file mode 100644
index 0000000..fcae179
--- /dev/null
+++ b/include/drivers/nxp/ddr/dimm.h
@@ -0,0 +1,330 @@
+/*
+ * Copyright 2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#ifndef DIMM_H
+#define DIMM_H
+
+#define SPD_MEMTYPE_DDR4        0x0C
+
+#define DDR4_SPD_MODULETYPE_MASK        0x0f
+#define DDR4_SPD_MODULETYPE_EXT         0x00
+#define DDR4_SPD_RDIMM			0x01
+#define DDR4_SPD_UDIMM			0x02
+#define DDR4_SPD_SO_DIMM		0x03
+#define DDR4_SPD_LRDIMM			0x04
+#define DDR4_SPD_MINI_RDIMM		0x05
+#define DDR4_SPD_MINI_UDIMM		0x06
+#define DDR4_SPD_72B_SO_RDIMM		0x08
+#define DDR4_SPD_72B_SO_UDIMM		0x09
+#define DDR4_SPD_16B_SO_DIMM		0x0c
+#define DDR4_SPD_32B_SO_DIMM		0x0d
+
+#define SPD_SPA0_ADDRESS		0x36
+#define SPD_SPA1_ADDRESS		0x37
+
+#define spd_to_ps(mtb, ftb)	\
+	((mtb) * pdimm->mtb_ps + ((ftb) * pdimm->ftb_10th_ps) / 10)
+
+#ifdef DDR_DEBUG
+#define dump_spd(spd, len) {				\
+	register int i;					\
+	register unsigned char *buf = (void *)(spd);	\
+							\
+	for (i = 0; i < (len); i++) {			\
+		print_uint(i);				\
+		puts("\t: 0x");				\
+		print_hex(buf[i]);			\
+		puts("\n");				\
+	}						\
+}
+#else
+#define dump_spd(spd, len) {}
+#endif
+
+/* From JEEC Standard No. 21-C release 23A */
+struct ddr4_spd {
+	/* General Section: Bytes 0-127 */
+	unsigned char info_size_crc;	/*  0 # bytes */
+	unsigned char spd_rev;		/*  1 Total # bytes of SPD */
+	unsigned char mem_type;		/*  2 Key Byte / mem type */
+	unsigned char module_type;	/*  3 Key Byte / Module Type */
+	unsigned char density_banks;	/*  4 Density and Banks	*/
+	unsigned char addressing;	/*  5 Addressing */
+	unsigned char package_type;	/*  6 Package type */
+	unsigned char opt_feature;	/*  7 Optional features */
+	unsigned char thermal_ref;	/*  8 Thermal and refresh */
+	unsigned char oth_opt_features;	/*  9 Other optional features */
+	unsigned char res_10;		/* 10 Reserved */
+	unsigned char module_vdd;	/* 11 Module nominal voltage */
+	unsigned char organization;	/* 12 Module Organization */
+	unsigned char bus_width;	/* 13 Module Memory Bus Width */
+	unsigned char therm_sensor;	/* 14 Module Thermal Sensor */
+	unsigned char ext_type;		/* 15 Extended module type */
+	unsigned char res_16;
+	unsigned char timebases;	/* 17 MTb and FTB */
+	unsigned char tck_min;		/* 18 tCKAVGmin */
+	unsigned char tck_max;		/* 19 TCKAVGmax */
+	unsigned char caslat_b1;	/* 20 CAS latencies, 1st byte */
+	unsigned char caslat_b2;	/* 21 CAS latencies, 2nd byte */
+	unsigned char caslat_b3;	/* 22 CAS latencies, 3rd byte */
+	unsigned char caslat_b4;	/* 23 CAS latencies, 4th byte */
+	unsigned char taa_min;		/* 24 Min CAS Latency Time */
+	unsigned char trcd_min;		/* 25 Min RAS# to CAS# Delay Time */
+	unsigned char trp_min;		/* 26 Min Row Precharge Delay Time */
+	unsigned char tras_trc_ext;	/* 27 Upper Nibbles for tRAS and tRC */
+	unsigned char tras_min_lsb;	/* 28 tRASmin, lsb */
+	unsigned char trc_min_lsb;	/* 29 tRCmin, lsb */
+	unsigned char trfc1_min_lsb;	/* 30 Min Refresh Recovery Delay Time */
+	unsigned char trfc1_min_msb;	/* 31 Min Refresh Recovery Delay Time */
+	unsigned char trfc2_min_lsb;	/* 32 Min Refresh Recovery Delay Time */
+	unsigned char trfc2_min_msb;	/* 33 Min Refresh Recovery Delay Time */
+	unsigned char trfc4_min_lsb;	/* 34 Min Refresh Recovery Delay Time */
+	unsigned char trfc4_min_msb;	/* 35 Min Refresh Recovery Delay Time */
+	unsigned char tfaw_msb;		/* 36 Upper Nibble for tFAW */
+	unsigned char tfaw_min;		/* 37 tFAW, lsb */
+	unsigned char trrds_min;	/* 38 tRRD_Smin, MTB */
+	unsigned char trrdl_min;	/* 39 tRRD_Lmin, MTB */
+	unsigned char tccdl_min;	/* 40 tCCS_Lmin, MTB */
+	unsigned char res_41[60-41];	/* 41 Rserved */
+	unsigned char mapping[78-60];	/* 60~77 Connector to SDRAM bit map */
+	unsigned char res_78[117-78];	/* 78~116, Reserved */
+	signed char fine_tccdl_min;	/* 117 Fine offset for tCCD_Lmin */
+	signed char fine_trrdl_min;	/* 118 Fine offset for tRRD_Lmin */
+	signed char fine_trrds_min;	/* 119 Fine offset for tRRD_Smin */
+	signed char fine_trc_min;	/* 120 Fine offset for tRCmin */
+	signed char fine_trp_min;	/* 121 Fine offset for tRPmin */
+	signed char fine_trcd_min;	/* 122 Fine offset for tRCDmin */
+	signed char fine_taa_min;	/* 123 Fine offset for tAAmin */
+	signed char fine_tck_max;	/* 124 Fine offset for tCKAVGmax */
+	signed char fine_tck_min;	/* 125 Fine offset for tCKAVGmin */
+	/* CRC: Bytes 126-127 */
+	unsigned char crc[2];		/* 126-127 SPD CRC */
+
+	/* Module-Specific Section: Bytes 128-255 */
+	union {
+		struct {
+			/* 128 (Unbuffered) Module Nominal Height */
+			unsigned char mod_height;
+			/* 129 (Unbuffered) Module Maximum Thickness */
+			unsigned char mod_thickness;
+			/* 130 (Unbuffered) Reference Raw Card Used */
+			unsigned char ref_raw_card;
+			/* 131 (Unbuffered) Address Mapping from
+			 *     Edge Connector to DRAM
+			 */
+			unsigned char addr_mapping;
+			/* 132~253 (Unbuffered) Reserved */
+			unsigned char res_132[254-132];
+			/* 254~255 CRC */
+			unsigned char crc[2];
+		} unbuffered;
+		struct {
+			/* 128 (Registered) Module Nominal Height */
+			unsigned char mod_height;
+			/* 129 (Registered) Module Maximum Thickness */
+			unsigned char mod_thickness;
+			/* 130 (Registered) Reference Raw Card Used */
+			unsigned char ref_raw_card;
+			/* 131 DIMM Module Attributes */
+			unsigned char modu_attr;
+			/* 132 RDIMM Thermal Heat Spreader Solution */
+			unsigned char thermal;
+			/* 133 Register Manufacturer ID Code, LSB */
+			unsigned char reg_id_lo;
+			/* 134 Register Manufacturer ID Code, MSB */
+			unsigned char reg_id_hi;
+			/* 135 Register Revision Number */
+			unsigned char reg_rev;
+			/* 136 Address mapping from register to DRAM */
+			unsigned char reg_map;
+			unsigned char ca_stren;
+			unsigned char clk_stren;
+			/* 139~253 Reserved */
+			unsigned char res_139[254-139];
+			/* 254~255 CRC */
+			unsigned char crc[2];
+		} registered;
+		struct {
+			/* 128 (Loadreduced) Module Nominal Height */
+			unsigned char mod_height;
+			/* 129 (Loadreduced) Module Maximum Thickness */
+			unsigned char mod_thickness;
+			/* 130 (Loadreduced) Reference Raw Card Used */
+			unsigned char ref_raw_card;
+			/* 131 DIMM Module Attributes */
+			unsigned char modu_attr;
+			/* 132 RDIMM Thermal Heat Spreader Solution */
+			unsigned char thermal;
+			/* 133 Register Manufacturer ID Code, LSB */
+			unsigned char reg_id_lo;
+			/* 134 Register Manufacturer ID Code, MSB */
+			unsigned char reg_id_hi;
+			/* 135 Register Revision Number */
+			unsigned char reg_rev;
+			/* 136 Address mapping from register to DRAM */
+			unsigned char reg_map;
+			/* 137 Register Output Drive Strength for CMD/Add*/
+			unsigned char reg_drv;
+			/* 138 Register Output Drive Strength for CK */
+			unsigned char reg_drv_ck;
+			/* 139 Data Buffer Revision Number */
+			unsigned char data_buf_rev;
+			/* 140 DRAM VrefDQ for Package Rank 0 */
+			unsigned char vrefqe_r0;
+			/* 141 DRAM VrefDQ for Package Rank 1 */
+			unsigned char vrefqe_r1;
+			/* 142 DRAM VrefDQ for Package Rank 2 */
+			unsigned char vrefqe_r2;
+			/* 143 DRAM VrefDQ for Package Rank 3 */
+			unsigned char vrefqe_r3;
+			/* 144 Data Buffer VrefDQ for DRAM Interface */
+			unsigned char data_intf;
+			/*
+			 * 145 Data Buffer MDQ Drive Strength and RTT
+			 * for data rate <= 1866
+			 */
+			unsigned char data_drv_1866;
+			/*
+			 * 146 Data Buffer MDQ Drive Strength and RTT
+			 * for 1866 < data rate <= 2400
+			 */
+			unsigned char data_drv_2400;
+			/*
+			 * 147 Data Buffer MDQ Drive Strength and RTT
+			 * for 2400 < data rate <= 3200
+			 */
+			unsigned char data_drv_3200;
+			/* 148 DRAM Drive Strength */
+			unsigned char dram_drv;
+			/*
+			 * 149 DRAM ODT (RTT_WR, RTT_NOM)
+			 * for data rate <= 1866
+			 */
+			unsigned char dram_odt_1866;
+			/*
+			 * 150 DRAM ODT (RTT_WR, RTT_NOM)
+			 * for 1866 < data rate <= 2400
+			 */
+			unsigned char dram_odt_2400;
+			/*
+			 * 151 DRAM ODT (RTT_WR, RTT_NOM)
+			 * for 2400 < data rate <= 3200
+			 */
+			unsigned char dram_odt_3200;
+			/*
+			 * 152 DRAM ODT (RTT_PARK)
+			 * for data rate <= 1866
+			 */
+			unsigned char dram_odt_park_1866;
+			/*
+			 * 153 DRAM ODT (RTT_PARK)
+			 * for 1866 < data rate <= 2400
+			 */
+			unsigned char dram_odt_park_2400;
+			/*
+			 * 154 DRAM ODT (RTT_PARK)
+			 * for 2400 < data rate <= 3200
+			 */
+			unsigned char dram_odt_park_3200;
+			unsigned char res_155[254-155];	/* Reserved */
+			/* 254~255 CRC */
+			unsigned char crc[2];
+		} loadreduced;
+		unsigned char uc[128]; /* 128-255 Module-Specific Section */
+	} mod_section;
+
+	unsigned char res_256[320-256];	/* 256~319 Reserved */
+
+	/* Module supplier's data: Byte 320~383 */
+	unsigned char mmid_lsb;		/* 320 Module MfgID Code LSB */
+	unsigned char mmid_msb;		/* 321 Module MfgID Code MSB */
+	unsigned char mloc;		/* 322 Mfg Location */
+	unsigned char mdate[2];		/* 323~324 Mfg Date */
+	unsigned char sernum[4];	/* 325~328 Module Serial Number */
+	unsigned char mpart[20];	/* 329~348 Mfg's Module Part Number */
+	unsigned char mrev;		/* 349 Module Revision Code */
+	unsigned char dmid_lsb;		/* 350 DRAM MfgID Code LSB */
+	unsigned char dmid_msb;		/* 351 DRAM MfgID Code MSB */
+	unsigned char stepping;		/* 352 DRAM stepping */
+	unsigned char msd[29];		/* 353~381 Mfg's Specific Data */
+	unsigned char res_382[2];	/* 382~383 Reserved */
+};
+
+/* Parameters for a DDR dimm computed from the SPD */
+struct dimm_params {
+	/* DIMM organization parameters */
+	char mpart[19];		/* guaranteed null terminated */
+
+	unsigned int n_ranks;
+	unsigned int die_density;
+	unsigned long long rank_density;
+	unsigned long long capacity;
+	unsigned int primary_sdram_width;
+	unsigned int ec_sdram_width;
+	unsigned int rdimm;
+	unsigned int package_3ds;	/* number of dies in 3DS */
+	unsigned int device_width;	/* x4, x8, x16 components */
+	unsigned int rc;
+
+	/* SDRAM device parameters */
+	unsigned int n_row_addr;
+	unsigned int n_col_addr;
+	unsigned int edc_config;	/* 0 = none, 1 = parity, 2 = ECC */
+	unsigned int bank_addr_bits;
+	unsigned int bank_group_bits;
+	unsigned int burst_lengths_bitmask;	/* BL=4 bit 2, BL=8 = bit 3 */
+
+	/* mirrored DIMMs */
+	unsigned int mirrored_dimm;	/* only for ddr3 */
+
+	/* DIMM timing parameters */
+
+	int mtb_ps;	/* medium timebase ps */
+	int ftb_10th_ps; /* fine timebase, in 1/10 ps */
+	int taa_ps;	/* minimum CAS latency time */
+	int tfaw_ps;	/* four active window delay */
+
+	/*
+	 * SDRAM clock periods
+	 * The range for these are 1000-10000 so a short should be sufficient
+	 */
+	int tckmin_x_ps;
+	int tckmax_ps;
+
+	/* SPD-defined CAS latencies */
+	unsigned int caslat_x;
+
+	/* basic timing parameters */
+	int trcd_ps;
+	int trp_ps;
+	int tras_ps;
+
+	int trfc1_ps;
+	int trfc2_ps;
+	int trfc4_ps;
+	int trrds_ps;
+	int trrdl_ps;
+	int tccdl_ps;
+	int trfc_slr_ps;
+
+	int trc_ps;	/* maximum = 254 ns + .75 ns = 254750 ps */
+	int twr_ps;	/* 15ns  for all speed bins */
+
+	unsigned int refresh_rate_ps;
+	unsigned int extended_op_srt;
+
+	/* RDIMM */
+	unsigned char rcw[16];	/* Register Control Word 0-15 */
+	unsigned int dq_mapping[18];
+	unsigned int dq_mapping_ors;
+};
+
+int read_spd(unsigned char chip, void *buf, int len);
+int crc16(unsigned char *ptr, int count);
+int cal_dimm_params(const struct ddr4_spd *spd, struct dimm_params *pdimm);
+
+#endif /* DIMM_H */
diff --git a/include/drivers/nxp/ddr/fsl-mmdc/fsl_mmdc.h b/include/drivers/nxp/ddr/fsl-mmdc/fsl_mmdc.h
new file mode 100644
index 0000000..31db552
--- /dev/null
+++ b/include/drivers/nxp/ddr/fsl-mmdc/fsl_mmdc.h
@@ -0,0 +1,173 @@
+/*
+ * Copyright 2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#ifndef FSL_MMDC_H
+#define FSL_MMDC_H
+
+/* PHY Write Leveling Configuration and Error Status Register (MPWLGCR) */
+#define MPWLGCR_HW_WL_EN		(1 << 0)
+
+/* PHY Pre-defined Compare and CA delay-line Configuration (MPPDCMPR2) */
+#define MPPDCMPR2_MPR_COMPARE_EN	(1 << 0)
+
+
+/* MMDC PHY Read DQS gating control register 0 (MPDGCTRL0) */
+#define AUTO_RD_DQS_GATING_CALIBRATION_EN	(1 << 28)
+
+/* MMDC PHY Read Delay HW Calibration Control Register (MPRDDLHWCTL) */
+#define MPRDDLHWCTL_AUTO_RD_CALIBRATION_EN	(1 << 4)
+
+/* MMDC Core Power Saving Control and Status Register (MMDC_MAPSR) */
+#define MMDC_MAPSR_PWR_SAV_CTRL_STAT	0x00001067
+
+/* MMDC Core Refresh Control Register (MMDC_MDREF) */
+#define MDREF_START_REFRESH	(1 << 0)
+
+/* MMDC Core Special Command Register (MDSCR) */
+#define CMD_ADDR_MSB_MR_OP(x)	(x << 24)
+#define CMD_ADDR_LSB_MR_ADDR(x)	(x << 16)
+#define MDSCR_DISABLE_CFG_REQ	(0 << 15)
+#define MDSCR_ENABLE_CON_REQ	(1 << 15)
+#define MDSCR_CON_ACK		(1 << 14)
+#define MDSCR_WL_EN		(1 << 9)
+#define	CMD_NORMAL		(0 << 4)
+#define	CMD_PRECHARGE		(1 << 4)
+#define	CMD_AUTO_REFRESH	(2 << 4)
+#define	CMD_LOAD_MODE_REG	(3 << 4)
+#define	CMD_ZQ_CALIBRATION	(4 << 4)
+#define	CMD_PRECHARGE_BANK_OPEN	(5 << 4)
+#define	CMD_MRR			(6 << 4)
+#define CMD_BANK_ADDR_0		0x0
+#define CMD_BANK_ADDR_1		0x1
+#define CMD_BANK_ADDR_2		0x2
+#define CMD_BANK_ADDR_3		0x3
+#define CMD_BANK_ADDR_4		0x4
+#define CMD_BANK_ADDR_5		0x5
+#define CMD_BANK_ADDR_6		0x6
+#define CMD_BANK_ADDR_7		0x7
+
+/* MMDC Core Control Register (MDCTL) */
+#define MDCTL_SDE0		(U(1) << 31)
+#define MDCTL_SDE1		(1 << 30)
+
+/* MMDC PHY ZQ HW control register (MMDC_MPZQHWCTRL) */
+#define MPZQHWCTRL_ZQ_HW_FORCE	(1 << 16)
+
+/* MMDC PHY Measure Unit Register (MMDC_MPMUR0) */
+#define MMDC_MPMUR0_FRC_MSR	(1 << 11)
+
+/* MMDC PHY Read delay-lines Configuration Register (MMDC_MPRDDLCTL) */
+/* default 64 for a quarter cycle delay */
+#define MMDC_MPRDDLCTL_DEFAULT_DELAY	0x40404040
+
+/* MMDC Registers */
+struct mmdc_regs {
+	unsigned int mdctl;
+	unsigned int mdpdc;
+	unsigned int mdotc;
+	unsigned int mdcfg0;
+	unsigned int mdcfg1;
+	unsigned int mdcfg2;
+	unsigned int mdmisc;
+	unsigned int mdscr;
+	unsigned int mdref;
+	unsigned int res1[2];
+	unsigned int mdrwd;
+	unsigned int mdor;
+	unsigned int mdmrr;
+	unsigned int mdcfg3lp;
+	unsigned int mdmr4;
+	unsigned int mdasp;
+	unsigned int res2[239];
+	unsigned int maarcr;
+	unsigned int mapsr;
+	unsigned int maexidr0;
+	unsigned int maexidr1;
+	unsigned int madpcr0;
+	unsigned int madpcr1;
+	unsigned int madpsr0;
+	unsigned int madpsr1;
+	unsigned int madpsr2;
+	unsigned int madpsr3;
+	unsigned int madpsr4;
+	unsigned int madpsr5;
+	unsigned int masbs0;
+	unsigned int masbs1;
+	unsigned int res3[2];
+	unsigned int magenp;
+	unsigned int res4[239];
+	unsigned int mpzqhwctrl;
+	unsigned int mpzqswctrl;
+	unsigned int mpwlgcr;
+	unsigned int mpwldectrl0;
+	unsigned int mpwldectrl1;
+	unsigned int mpwldlst;
+	unsigned int mpodtctrl;
+	unsigned int mprddqby0dl;
+	unsigned int mprddqby1dl;
+	unsigned int mprddqby2dl;
+	unsigned int mprddqby3dl;
+	unsigned int mpwrdqby0dl;
+	unsigned int mpwrdqby1dl;
+	unsigned int mpwrdqby2dl;
+	unsigned int mpwrdqby3dl;
+	unsigned int mpdgctrl0;
+	unsigned int mpdgctrl1;
+	unsigned int mpdgdlst0;
+	unsigned int mprddlctl;
+	unsigned int mprddlst;
+	unsigned int mpwrdlctl;
+	unsigned int mpwrdlst;
+	unsigned int mpsdctrl;
+	unsigned int mpzqlp2ctl;
+	unsigned int mprddlhwctl;
+	unsigned int mpwrdlhwctl;
+	unsigned int mprddlhwst0;
+	unsigned int mprddlhwst1;
+	unsigned int mpwrdlhwst0;
+	unsigned int mpwrdlhwst1;
+	unsigned int mpwlhwerr;
+	unsigned int mpdghwst0;
+	unsigned int mpdghwst1;
+	unsigned int mpdghwst2;
+	unsigned int mpdghwst3;
+	unsigned int mppdcmpr1;
+	unsigned int mppdcmpr2;
+	unsigned int mpswdar0;
+	unsigned int mpswdrdr0;
+	unsigned int mpswdrdr1;
+	unsigned int mpswdrdr2;
+	unsigned int mpswdrdr3;
+	unsigned int mpswdrdr4;
+	unsigned int mpswdrdr5;
+	unsigned int mpswdrdr6;
+	unsigned int mpswdrdr7;
+	unsigned int mpmur0;
+	unsigned int mpwrcadl;
+	unsigned int mpdccr;
+};
+
+struct fsl_mmdc_info {
+	unsigned int mdctl;
+	unsigned int mdpdc;
+	unsigned int mdotc;
+	unsigned int mdcfg0;
+	unsigned int mdcfg1;
+	unsigned int mdcfg2;
+	unsigned int mdmisc;
+	unsigned int mdref;
+	unsigned int mdrwd;
+	unsigned int mdor;
+	unsigned int mdasp;
+	unsigned int mpodtctrl;
+	unsigned int mpzqhwctrl;
+	unsigned int mprddlctl;
+};
+
+void mmdc_init(const struct fsl_mmdc_info *priv, uintptr_t nxp_ddr_addr);
+
+#endif /* FSL_MMDC_H */
diff --git a/include/drivers/nxp/ddr/immap.h b/include/drivers/nxp/ddr/immap.h
new file mode 100644
index 0000000..83b4de6
--- /dev/null
+++ b/include/drivers/nxp/ddr/immap.h
@@ -0,0 +1,125 @@
+/*
+ * Copyright 2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#ifndef DDR_IMMAP_H
+#define DDR_IMMAP_H
+
+#define	DDR_DBUS_64		0
+#define	DDR_DBUS_32		1
+#define	DDR_DBUS_16		2
+
+/*
+ * DDRC register file for DDRC 5.0 and above
+ */
+struct ccsr_ddr {
+	struct {
+		unsigned int a;		 /* 0x0, 0x8, 0x10, 0x18 */
+		unsigned int res;	 /* 0x4, 0xc, 0x14, 0x1c */
+	} bnds[4];
+	unsigned char	res_20[0x40 - 0x20];
+	unsigned int	dec[10];	 /* 0x40 */
+	unsigned char	res_68[0x80 - 0x68];
+	unsigned int	csn_cfg[4];	 /* 0x80, 0x84, 0x88, 0x8c */
+	unsigned char	res_90[48];
+	unsigned int	csn_cfg_2[4];	 /* 0xc0, 0xc4, 0xc8, 0xcc */
+	unsigned char	res_d0[48];
+	unsigned int	timing_cfg_3;	 /* SDRAM Timing Configuration 3 */
+	unsigned int	timing_cfg_0;	 /* SDRAM Timing Configuration 0 */
+	unsigned int	timing_cfg_1;	 /* SDRAM Timing Configuration 1 */
+	unsigned int	timing_cfg_2;	 /* SDRAM Timing Configuration 2 */
+	unsigned int	sdram_cfg;	 /* SDRAM Control Configuration */
+	unsigned int	sdram_cfg_2;	 /* SDRAM Control Configuration 2 */
+	unsigned int	sdram_mode;	 /* SDRAM Mode Configuration */
+	unsigned int	sdram_mode_2;	 /* SDRAM Mode Configuration 2 */
+	unsigned int	sdram_md_cntl;	 /* SDRAM Mode Control */
+	unsigned int	sdram_interval;	 /* SDRAM Interval Configuration */
+	unsigned int	sdram_data_init; /* SDRAM Data initialization */
+	unsigned char	res_12c[4];
+	unsigned int	sdram_clk_cntl;	 /* SDRAM Clock Control */
+	unsigned char	res_134[20];
+	unsigned int	init_addr;	 /* training init addr */
+	unsigned int	init_ext_addr;	 /* training init extended addr */
+	unsigned char	res_150[16];
+	unsigned int	timing_cfg_4;	 /* SDRAM Timing Configuration 4 */
+	unsigned int	timing_cfg_5;	 /* SDRAM Timing Configuration 5 */
+	unsigned int	timing_cfg_6;	 /* SDRAM Timing Configuration 6 */
+	unsigned int	timing_cfg_7;	 /* SDRAM Timing Configuration 7 */
+	unsigned int	zq_cntl;	 /* ZQ calibration control*/
+	unsigned int	wrlvl_cntl;	 /* write leveling control*/
+	unsigned char	reg_178[4];
+	unsigned int	ddr_sr_cntr;	 /* self refresh counter */
+	unsigned int	ddr_sdram_rcw_1; /* Control Words 1 */
+	unsigned int	ddr_sdram_rcw_2; /* Control Words 2 */
+	unsigned char	reg_188[8];
+	unsigned int	ddr_wrlvl_cntl_2; /* write leveling control 2 */
+	unsigned int	ddr_wrlvl_cntl_3; /* write leveling control 3 */
+	unsigned char	res_198[0x1a0-0x198];
+	unsigned int	ddr_sdram_rcw_3;
+	unsigned int	ddr_sdram_rcw_4;
+	unsigned int	ddr_sdram_rcw_5;
+	unsigned int	ddr_sdram_rcw_6;
+	unsigned char	res_1b0[0x200-0x1b0];
+	unsigned int	sdram_mode_3;	 /* SDRAM Mode Configuration 3 */
+	unsigned int	sdram_mode_4;	 /* SDRAM Mode Configuration 4 */
+	unsigned int	sdram_mode_5;	 /* SDRAM Mode Configuration 5 */
+	unsigned int	sdram_mode_6;	 /* SDRAM Mode Configuration 6 */
+	unsigned int	sdram_mode_7;	 /* SDRAM Mode Configuration 7 */
+	unsigned int	sdram_mode_8;	 /* SDRAM Mode Configuration 8 */
+	unsigned char	res_218[0x220-0x218];
+	unsigned int	sdram_mode_9;	 /* SDRAM Mode Configuration 9 */
+	unsigned int	sdram_mode_10;	 /* SDRAM Mode Configuration 10 */
+	unsigned int	sdram_mode_11;	 /* SDRAM Mode Configuration 11 */
+	unsigned int	sdram_mode_12;	 /* SDRAM Mode Configuration 12 */
+	unsigned int	sdram_mode_13;	 /* SDRAM Mode Configuration 13 */
+	unsigned int	sdram_mode_14;	 /* SDRAM Mode Configuration 14 */
+	unsigned int	sdram_mode_15;	 /* SDRAM Mode Configuration 15 */
+	unsigned int	sdram_mode_16;	 /* SDRAM Mode Configuration 16 */
+	unsigned char	res_240[0x250-0x240];
+	unsigned int	timing_cfg_8;	 /* SDRAM Timing Configuration 8 */
+	unsigned int	timing_cfg_9;	 /* SDRAM Timing Configuration 9 */
+	unsigned int	timing_cfg_10;	 /* SDRAM Timing COnfigurtion 10 */
+	unsigned char   res_258[0x260-0x25c];
+	unsigned int	sdram_cfg_3;
+	unsigned char	res_264[0x270-0x264];
+	unsigned int	sdram_md_cntl_2;
+	unsigned char	res_274[0x400-0x274];
+	unsigned int	dq_map[4];
+	unsigned char	res_410[0x800-0x410];
+	unsigned int	tx_cfg[4];
+	unsigned char	res_810[0xb20-0x810];
+	unsigned int	ddr_dsr1;	 /* Debug Status 1 */
+	unsigned int	ddr_dsr2;	 /* Debug Status 2 */
+	unsigned int	ddr_cdr1;	 /* Control Driver 1 */
+	unsigned int	ddr_cdr2;	 /* Control Driver 2 */
+	unsigned char	res_b30[200];
+	unsigned int	ip_rev1;	 /* IP Block Revision 1 */
+	unsigned int	ip_rev2;	 /* IP Block Revision 2 */
+	unsigned int	eor;		 /* Enhanced Optimization Register */
+	unsigned char	res_c04[252];
+	unsigned int	mtcr;		 /* Memory Test Control Register */
+	unsigned char	res_d04[28];
+	unsigned int	mtp[10];	 /* Memory Test Patterns */
+	unsigned char	res_d48[184];
+	unsigned int	data_err_inject_hi; /* Data Path Err Injection Mask Hi*/
+	unsigned int	data_err_inject_lo;/* Data Path Err Injection Mask Lo*/
+	unsigned int	ecc_err_inject;	 /* Data Path Err Injection Mask ECC */
+	unsigned char	res_e0c[20];
+	unsigned int	capture_data_hi; /* Data Path Read Capture High */
+	unsigned int	capture_data_lo; /* Data Path Read Capture Low */
+	unsigned int	capture_ecc;	 /* Data Path Read Capture ECC */
+	unsigned char	res_e2c[20];
+	unsigned int	err_detect;	 /* Error Detect */
+	unsigned int	err_disable;	 /* Error Disable */
+	unsigned int	err_int_en;
+	unsigned int	capture_attributes; /* Error Attrs Capture */
+	unsigned int	capture_address; /* Error Addr Capture */
+	unsigned int	capture_ext_address; /* Error Extended Addr Capture */
+	unsigned int	err_sbe;	 /* Single-Bit ECC Error Management */
+	unsigned char	res_e5c[164];
+	unsigned int	debug[64];	 /* debug_1 to debug_64 */
+};
+#endif /* DDR_IMMAP_H */
diff --git a/include/drivers/nxp/ddr/opts.h b/include/drivers/nxp/ddr/opts.h
new file mode 100644
index 0000000..f32891b
--- /dev/null
+++ b/include/drivers/nxp/ddr/opts.h
@@ -0,0 +1,119 @@
+/*
+ * Copyright 2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#ifndef DDR_OPTS_H
+#define DDR_OPTS_H
+
+#define SDRAM_TYPE_DDR4		5	/* sdram_cfg register */
+
+#define DDR_BC4			4	/* burst chop */
+#define DDR_OTF			6	/* on-the-fly BC4 and BL8 */
+#define DDR_BL8			8	/* burst length 8 */
+
+#define DDR4_RTT_OFF		0
+#define DDR4_RTT_60_OHM		1	/* RZQ/4 */
+#define DDR4_RTT_120_OHM	2	/* RZQ/2 */
+#define DDR4_RTT_40_OHM		3	/* RZQ/6 */
+#define DDR4_RTT_240_OHM	4	/* RZQ/1 */
+#define DDR4_RTT_48_OHM		5	/* RZQ/5 */
+#define DDR4_RTT_80_OHM		6	/* RZQ/3 */
+#define DDR4_RTT_34_OHM		7	/* RZQ/7 */
+#define DDR4_RTT_WR_OFF		0
+#define DDR4_RTT_WR_120_OHM	1
+#define DDR4_RTT_WR_240_OHM	2
+#define DDR4_RTT_WR_HZ		3
+#define DDR4_RTT_WR_80_OHM	4
+#define DDR_ODT_NEVER		0x0
+#define DDR_ODT_CS		0x1
+#define DDR_ODT_ALL_OTHER_CS	0x2
+#define DDR_ODT_OTHER_DIMM	0x3
+#define DDR_ODT_ALL		0x4
+#define DDR_ODT_SAME_DIMM	0x5
+#define DDR_ODT_CS_AND_OTHER_DIMM 0x6
+#define DDR_ODT_OTHER_CS_ONSAMEDIMM 0x7
+#define DDR_BA_INTLV_CS01	0x40
+#define DDR_BA_INTLV_CS0123	0x64
+#define DDR_BA_NONE		0
+#define DDR_256B_INTLV		0x8
+
+struct memctl_opt {
+	int rdimm;
+	unsigned int dbw_cap_shift;
+	struct local_opts_s {
+		unsigned int auto_precharge;
+		unsigned int odt_rd_cfg;
+		unsigned int odt_wr_cfg;
+		unsigned int odt_rtt_norm;
+		unsigned int odt_rtt_wr;
+	} cs_odt[DDRC_NUM_CS];
+	int ctlr_intlv;
+	unsigned int ctlr_intlv_mode;
+	unsigned int ba_intlv;
+	int addr_hash;
+	int ecc_mode;
+	int ctlr_init_ecc;
+	int self_refresh_in_sleep;
+	int self_refresh_irq_en;
+	int dynamic_power;
+	/* memory data width 0 = 64-bit, 1 = 32-bit, 2 = 16-bit */
+	unsigned int data_bus_dimm;
+	unsigned int data_bus_used;	/* on individual board */
+	unsigned int burst_length;	/* BC4, OTF and BL8 */
+	int otf_burst_chop_en;
+	int mirrored_dimm;
+	int quad_rank_present;
+	int output_driver_impedance;
+	int ap_en;
+	int x4_en;
+
+	int caslat_override;
+	unsigned int caslat_override_value;
+	int addt_lat_override;
+	unsigned int addt_lat_override_value;
+
+	unsigned int clk_adj;
+	unsigned int cpo_sample;
+	unsigned int wr_data_delay;
+
+	unsigned int cswl_override;
+	unsigned int wrlvl_override;
+	unsigned int wrlvl_sample;
+	unsigned int wrlvl_start;
+	unsigned int wrlvl_ctl_2;
+	unsigned int wrlvl_ctl_3;
+
+	int half_strength_drive_en;
+	int twot_en;
+	int threet_en;
+	unsigned int bstopre;
+	unsigned int tfaw_ps;
+
+	int rtt_override;
+	unsigned int rtt_override_value;
+	unsigned int rtt_wr_override_value;
+	unsigned int rtt_park;
+
+	int auto_self_refresh_en;
+	unsigned int sr_it;
+	unsigned int ddr_cdr1;
+	unsigned int ddr_cdr2;
+
+	unsigned int trwt_override;
+	unsigned int trwt;
+	unsigned int twrt;
+	unsigned int trrt;
+	unsigned int twwt;
+
+	unsigned int vref_phy;
+	unsigned int vref_dimm;
+	unsigned int odt;
+	unsigned int phy_tx_impedance;
+	unsigned int phy_atx_impedance;
+	unsigned int skip2d;
+};
+
+#endif /* DDR_OPTS_H */
diff --git a/include/drivers/nxp/ddr/regs.h b/include/drivers/nxp/ddr/regs.h
new file mode 100644
index 0000000..e85fd8f
--- /dev/null
+++ b/include/drivers/nxp/ddr/regs.h
@@ -0,0 +1,109 @@
+/*
+ * Copyright 2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#ifndef DDR_REG_H
+#define DDR_REG_H
+
+#define SDRAM_CS_CONFIG_EN		0x80000000
+
+/* DDR_SDRAM_CFG - DDR SDRAM Control Configuration
+ */
+#define SDRAM_CFG_MEM_EN		0x80000000
+#define SDRAM_CFG_SREN			0x40000000
+#define SDRAM_CFG_ECC_EN		0x20000000
+#define SDRAM_CFG_RD_EN			0x10000000
+#define SDRAM_CFG_SDRAM_TYPE_MASK	0x07000000
+#define SDRAM_CFG_SDRAM_TYPE_SHIFT	24
+#define SDRAM_CFG_DYN_PWR		0x00200000
+#define SDRAM_CFG_DBW_MASK		0x00180000
+#define SDRAM_CFG_DBW_SHIFT		19
+#define SDRAM_CFG_32_BW			0x00080000
+#define SDRAM_CFG_16_BW			0x00100000
+#define SDRAM_CFG_8_BW			0x00180000
+#define SDRAM_CFG_8_BE			0x00040000
+#define SDRAM_CFG_2T_EN			0x00008000
+#define SDRAM_CFG_MEM_HLT		0x00000002
+#define SDRAM_CFG_BI			0x00000001
+
+#define SDRAM_CFG2_FRC_SR		0x80000000
+#define SDRAM_CFG2_FRC_SR_CLEAR		~(SDRAM_CFG2_FRC_SR)
+#define SDRAM_CFG2_D_INIT		0x00000010
+#define SDRAM_CFG2_AP_EN		0x00000020
+#define SDRAM_CFG2_ODT_ONLY_READ	2
+
+#define SDRAM_CFG3_DDRC_RST		0x80000000
+
+#define SDRAM_INTERVAL_REFINT	0xFFFF0000
+#define SDRAM_INTERVAL_REFINT_CLEAR	~(SDRAM_INTERVAL_REFINT)
+#define SDRAM_INTERVAL_BSTOPRE	0x3FFF
+
+/* DDR_MD_CNTL */
+#define MD_CNTL_MD_EN		0x80000000
+#define MD_CNTL_CS_SEL(x)	(((x) & 0x7) << 28)
+#define MD_CNTL_MD_SEL(x)	(((x) & 0xf) << 24)
+#define MD_CNTL_CKE(x)		(((x) & 0x3) << 20)
+
+/* DDR_CDR1 */
+#define DDR_CDR1_DHC_EN	0x80000000
+#define DDR_CDR1_ODT_SHIFT	17
+#define DDR_CDR1_ODT_MASK	0x6
+#define DDR_CDR2_ODT_MASK	0x1
+#define DDR_CDR1_ODT(x) ((x & DDR_CDR1_ODT_MASK) << DDR_CDR1_ODT_SHIFT)
+#define DDR_CDR2_ODT(x) (x & DDR_CDR2_ODT_MASK)
+#define DDR_CDR2_VREF_OVRD(x)	(0x00008080 | ((((x) - 37) & 0x3F) << 8))
+#define DDR_CDR2_VREF_TRAIN_EN	0x00000080
+#define DDR_CDR2_VREF_RANGE_2	0x00000040
+#define DDR_CDR_ODT_OFF		0x0
+#define DDR_CDR_ODT_100ohm	0x1
+#define DDR_CDR_ODT_120OHM	0x2
+#define DDR_CDR_ODT_80ohm	0x3
+#define DDR_CDR_ODT_60ohm	0x4
+#define DDR_CDR_ODT_40ohm	0x5
+#define DDR_CDR_ODT_50ohm	0x6
+#define DDR_CDR_ODT_30ohm	0x7
+
+
+/* DDR ERR_DISABLE */
+#define DDR_ERR_DISABLE_APED	(1 << 8)  /* Address parity error disable */
+#define DDR_ERR_DISABLE_SBED	(1 << 2)  /* Address parity error disable */
+#define DDR_ERR_DISABLE_MBED	(1 << 3)  /* Address parity error disable */
+
+/* Mode Registers */
+#define DDR_MR5_CA_PARITY_LAT_4_CLK	0x1 /* for DDR4-1600/1866/2133 */
+#define DDR_MR5_CA_PARITY_LAT_5_CLK	0x2 /* for DDR4-2400 */
+
+/* DDR DSR2  register */
+#define DDR_DSR_2_PHY_INIT_CMPLT	0x4
+
+/* SDRAM TIMING_CFG_10 register */
+#define DDR_TIMING_CFG_10_T_STAB	0x7FFF
+
+/* DEBUG 2 register */
+#define DDR_DBG_2_MEM_IDLE		0x00000002
+
+/* DEBUG 26 register */
+#define DDR_DEBUG_26_BIT_6		(0x1 << 6)
+#define DDR_DEBUG_26_BIT_7		(0x1 << 7)
+#define DDR_DEBUG_26_BIT_12		(0x1 << 12)
+#define DDR_DEBUG_26_BIT_13		(0x1 << 13)
+#define DDR_DEBUG_26_BIT_14		(0x1 << 14)
+#define DDR_DEBUG_26_BIT_15		(0x1 << 15)
+#define DDR_DEBUG_26_BIT_16		(0x1 << 16)
+#define DDR_DEBUG_26_BIT_17		(0x1 << 17)
+#define DDR_DEBUG_26_BIT_18		(0x1 << 18)
+#define DDR_DEBUG_26_BIT_19		(0x1 << 19)
+#define DDR_DEBUG_26_BIT_24		(0x1 << 24)
+#define DDR_DEBUG_26_BIT_25		(0x1 << 25)
+
+#define DDR_DEBUG_26_BIT_24_CLEAR	~(DDR_DEBUG_26_BIT_24)
+
+/* DEBUG_29 register */
+#define DDR_TX_BD_DIS	(1 << 10) /* Transmit Bit Deskew Disable */
+
+#define DDR_INIT_ADDR_EXT_UIA	(1 << 31)
+
+#endif /* DDR_REG_H */
diff --git a/include/drivers/nxp/ddr/utility.h b/include/drivers/nxp/ddr/utility.h
new file mode 100644
index 0000000..2e22ad5
--- /dev/null
+++ b/include/drivers/nxp/ddr/utility.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright 2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#ifndef UTILITY_H
+#define UTILITY_H
+
+#include <dcfg.h>
+
+#if defined(NXP_HAS_CCN504) || defined(NXP_HAS_CCN508)
+#define CCN_HN_F_SAM_CTL		0x8
+#define CCN_HN_F_REGION_SIZE		0x10000
+#endif
+
+unsigned long get_ddr_freq(struct sysinfo *sys, int ctrl_num);
+unsigned int get_memory_clk_ps(unsigned long clk);
+unsigned int picos_to_mclk(unsigned long data_rate, unsigned int picos);
+unsigned int get_ddrc_version(const struct ccsr_ddr *ddr);
+void print_ddr_info(struct ccsr_ddr *ddr);
+
+#endif
diff --git a/include/drivers/nxp/flexspi/flash_info.h b/include/drivers/nxp/flexspi/flash_info.h
new file mode 100644
index 0000000..d0ffc86
--- /dev/null
+++ b/include/drivers/nxp/flexspi/flash_info.h
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ *  Copyright 2020-2021 NXP
+ */
+
+/**
+ * @Flash info
+ *
+ */
+#ifndef FLASH_INFO_H
+#define FLASH_INFO_H
+
+#define SZ_16M_BYTES			0x1000000U
+
+/* Start of "if defined(CONFIG_MT25QU512A)" */
+#if defined(CONFIG_MT25QU512A)
+#define F_SECTOR_64K			0x10000U
+#define F_PAGE_256			0x100U
+#define F_SECTOR_4K			0x1000U
+#define F_FLASH_SIZE_BYTES		0x4000000U
+#define F_SECTOR_ERASE_SZ		F_SECTOR_64K
+#ifdef CONFIG_FSPI_4K_ERASE
+#define F_SECTOR_ERASE_SZ		F_SECTOR_4K
+#endif
+
+/* End of "if defined(CONFIG_MT25QU512A)" */
+
+/* Start of "if defined(CONFIG_MX25U25645G)" */
+#elif defined(CONFIG_MX25U25645G)
+#define F_SECTOR_64K			0x10000U
+#define F_PAGE_256			0x100U
+#define F_SECTOR_4K			0x1000U
+#define F_FLASH_SIZE_BYTES		0x2000000U
+#define F_SECTOR_ERASE_SZ		F_SECTOR_64K
+#ifdef CONFIG_FSPI_4K_ERASE
+#define F_SECTOR_ERASE_SZ		F_SECTOR_4K
+#endif
+
+/* End of "if defined(CONFIG_MX25U25645G)" */
+
+/* Start of "if defined(CONFIG_MX25U51245G)" */
+#elif defined(CONFIG_MX25U51245G)
+#define F_SECTOR_64K			0x10000U
+#define F_PAGE_256			0x100U
+#define F_SECTOR_4K			0x1000U
+#define F_FLASH_SIZE_BYTES		0x4000000U
+#define F_SECTOR_ERASE_SZ		F_SECTOR_64K
+#ifdef CONFIG_FSPI_4K_ERASE
+#define F_SECTOR_ERASE_SZ		F_SECTOR_4K
+#endif
+
+/* End of "if defined(CONFIG_MX25U51245G)" */
+
+/* Start of "if defined(CONFIG_MT35XU512A)" */
+#elif defined(CONFIG_MT35XU512A)
+#define F_SECTOR_128K			0x20000U
+#define F_SECTOR_32K			0x8000U
+#define F_PAGE_256			0x100U
+#define F_SECTOR_4K			0x1000U
+#define F_FLASH_SIZE_BYTES		0x4000000U
+#define F_SECTOR_ERASE_SZ		F_SECTOR_128K
+#ifdef CONFIG_FSPI_4K_ERASE
+#define F_SECTOR_ERASE_SZ		F_SECTOR_4K
+#endif
+/* If Warm boot is enabled for the platform,
+ * count of arm instruction N-OP(s) to mark
+ * the completion of write operation to flash;
+ * varies from one flash to other.
+ */
+#ifdef NXP_WARM_BOOT
+#define FLASH_WR_COMP_WAIT_BY_NOP_COUNT	0x20000
+#endif
+
+/* End of "if defined(CONFIG_MT35XU512A)" */
+
+/* Start of #elif defined(CONFIG_MT35XU02G) */
+#elif defined(CONFIG_MT35XU02G)
+#define F_SECTOR_128K			0x20000U
+#define F_PAGE_256			0x100U
+#define F_SECTOR_4K			0x1000U
+#define F_FLASH_SIZE_BYTES		0x10000000U
+#define F_SECTOR_ERASE_SZ		F_SECTOR_128K
+#ifdef CONFIG_FSPI_4K_ERASE
+#define F_SECTOR_ERASE_SZ		F_SECTOR_4K
+#endif
+
+#endif /* End of #elif defined(CONFIG_MT35XU02G) */
+
+#endif /* FLASH_INFO_H */
diff --git a/include/drivers/nxp/flexspi/fspi_api.h b/include/drivers/nxp/flexspi/fspi_api.h
new file mode 100644
index 0000000..d0de543
--- /dev/null
+++ b/include/drivers/nxp/flexspi/fspi_api.h
@@ -0,0 +1,122 @@
+/*
+ * Copyright 2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+
+/*!
+ * @file	fspi_api.h
+ * @brief	This file contains the FlexSPI/FSPI API to communicate
+ *		to attached Slave device.
+ * @addtogroup	FSPI_API
+ * @{
+ */
+
+#ifndef FSPI_API_H
+#define FSPI_API_H
+
+#if DEBUG_FLEXSPI
+#define SZ_57M			0x3900000u
+#endif
+
+/*!
+ * Basic set of APIs.
+ */
+
+/*!
+ * @details AHB read/IP Read, decision to be internal to API
+ * Minimum Read size = 1Byte
+ * @param[in] src_off source offset from where data to read from flash
+ * @param[out] des Destination location where data needs to be copied
+ * @param[in] len length in Bytes,where 1-word=4-bytes/32-bits
+ *
+ * @return XSPI_SUCCESS or error code
+ */
+int xspi_read(uint32_t src_off, uint32_t *des, uint32_t len);
+/*!
+ * @details Sector erase, Minimum size
+ * 256KB(0x40000)/128KB(0x20000)/64K(0x10000)/4K(0x1000)
+ * depending upon flash, Calls xspi_wren() internally
+ * @param[out] erase_offset Destination erase location on flash which
+ * has to be erased, needs to be multiple of 0x40000/0x20000/0x10000
+ * @param[in] erase_len length in bytes in Hex like 0x100000 for 1MB, minimum
+ * erase size is 1 sector(0x40000/0x20000/0x10000)
+ *
+ * @return XSPI_SUCCESS or error code
+ */
+int xspi_sector_erase(uint32_t erase_offset, uint32_t erase_len);
+/*!
+ * @details IP write, For writing data to flash, calls xspi_wren() internally.
+ * Single/multiple page write can start @any offset, but performance will be low
+ * due to ERRATA
+ * @param[out] dst_off Destination location on flash where data needs to
+ * be written
+ * @param[in] src source offset from where data to be read
+ * @param[in] len length in bytes,where 1-word=4-bytes/32-bits
+ *
+ * @return XSPI_SUCCESS or error code
+ */
+int xspi_write(uint32_t dst_off, void *src, uint32_t len);
+/*!
+ * @details fspi_init, Init function.
+ * @param[in] uint32_t base_reg_addr
+ * @param[in] uint32_t flash_start_addr
+ *
+ * @return XSPI_SUCCESS or error code
+ */
+int fspi_init(uint32_t base_reg_addr, uint32_t flash_start_addr);
+/*!
+ * @details is_flash_busy, Check if any erase or write or lock is
+ * pending on flash/slave
+ * @param[in] void
+ *
+ * @return TRUE/FLASE
+ */
+bool is_flash_busy(void);
+
+/*!
+ * Advanced set of APIs.
+ */
+
+/*!
+ * @details Write enable, to be used by advance users only.
+ * Step 1 for sending write commands to flash.
+ * @param[in] dst_off destination offset where data will be written
+ *
+ * @return XSPI_SUCCESS or error code
+ */
+int xspi_wren(uint32_t dst_off);
+/*!
+ * @details AHB read, meaning direct memory mapped access to flash,
+ * Minimum Read size = 1Byte
+ * @param[in] src_off source offset from where data to read from flash,
+ * needs to be word aligned
+ * @param[out] des Destination location where data needs to be copied
+ * @param[in] len length in Bytes,where 1-word=4-bytes/32-bits
+ *
+ * @return XSPI_SUCCESS or error code
+ */
+int xspi_ahb_read(uint32_t src_off, uint32_t *des, uint32_t len);
+/*!
+ * @details IP read, READ via RX buffer from flash, minimum READ size = 1Byte
+ * @param[in] src_off source offset from where data to be read from flash
+ * @param[out] des Destination location where data needs to be copied
+ * @param[in] len length in Bytes,where 1-word=4-bytes/32-bits
+ *
+ * @return XSPI_SUCCESS or error code
+ */
+int xspi_ip_read(uint32_t src_off, uint32_t *des, uint32_t len);
+/*!
+ * @details CHIP erase, Erase complete chip in one go
+ *
+ * @return XSPI_SUCCESS or error code
+ */
+int xspi_bulk_erase(void);
+
+/*!
+ * Add test cases to confirm flash read/erase/write functionality.
+ */
+void fspi_test(uint32_t fspi_test_addr, uint32_t size, int extra);
+#endif /* FSPI_API_H */
diff --git a/include/drivers/nxp/flexspi/xspi_error_codes.h b/include/drivers/nxp/flexspi/xspi_error_codes.h
new file mode 100644
index 0000000..18b31eb
--- /dev/null
+++ b/include/drivers/nxp/flexspi/xspi_error_codes.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright 2020 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+/* error codes */
+#ifndef XSPI_ERROR_CODES_H
+#define XSPI_ERROR_CODES_H
+
+#include <errno.h>
+
+typedef enum {
+	XSPI_SUCCESS                     = 0,
+	XSPI_READ_FAIL			 = ELAST + 1,
+	XSPI_ERASE_FAIL,
+	XSPI_IP_READ_FAIL,
+	XSPI_AHB_READ_FAIL,
+	XSPI_IP_WRITE_FAIL,
+	XSPI_AHB_WRITE_FAIL,
+	XSPI_BLOCK_TIMEOUT,
+	XSPI_UNALIGN_ADDR,
+	XSPI_UNALIGN_SIZE,
+} XSPI_STATUS_CODES;
+#undef ELAST
+#define ELAST XSPI_STATUS_CODES.XSPI_UNALIGN_SIZE
+#endif
diff --git a/include/drivers/nxp/gic/gicv2/plat_gic.h b/include/drivers/nxp/gic/gicv2/plat_gic.h
new file mode 100644
index 0000000..ff34744
--- /dev/null
+++ b/include/drivers/nxp/gic/gicv2/plat_gic.h
@@ -0,0 +1,72 @@
+/*
+ * Copyright 2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#ifndef PLAT_GICV2_H
+#define PLAT_GICV2_H
+
+#include <drivers/arm/gicv2.h>
+
+ /* register offsets */
+#define GICD_CTLR_OFFSET          0x0
+#define GICD_CPENDSGIR3_OFFSET    0xF1C
+#define GICD_SPENDSGIR3_OFFSET    0xF2C
+#define GICD_SGIR_OFFSET          0xF00
+#define GICD_IGROUPR0_OFFSET      0x080
+#define GICD_TYPER_OFFSET         0x0004
+#define GICD_ISENABLER0_OFFSET    0x0100
+#define GICD_ICENABLER0_OFFSET    0x0180
+#define GICD_IPRIORITYR3_OFFSET   0x040C
+#define GICD_ISENABLERn_OFFSET    0x0100
+#define GICD_ISACTIVER0_OFFSET    0x300
+
+#define GICC_CTLR_OFFSET          0x0
+#define GICC_PMR_OFFSET           0x0004
+#define GICC_IAR_OFFSET           0x000C
+#define GICC_DIR_OFFSET           0x1000
+#define GICC_EOIR_OFFSET          0x0010
+
+ /* bitfield masks */
+#define GICC_CTLR_EN_GRP0           0x1
+#define GICC_CTLR_EN_GRP1           0x2
+#define GICC_CTLR_EOImodeS_MASK     0x200
+#define GICC_CTLR_DIS_BYPASS        0x60
+#define GICC_CTLR_CBPR_MASK         0x10
+#define GICC_CTLR_FIQ_EN_MASK       0x8
+#define GICC_CTLR_ACKCTL_MASK       0x4
+#define GICC_PMR_FILTER             0xFF
+
+#define GICD_CTLR_EN_GRP0           0x1
+#define GICD_CTLR_EN_GRP1           0x2
+#define GICD_IGROUP0_SGI15          0x8000
+#define GICD_ISENABLE0_SGI15        0x8000
+#define GICD_ICENABLE0_SGI15        0x8000
+#define GICD_ISACTIVER0_SGI15       0x8000
+#define GICD_CPENDSGIR_CLR_MASK     0xFF000000
+#define GICD_IPRIORITY_SGI15_MASK   0xFF000000
+#define GICD_SPENDSGIR3_SGI15_MASK  0xFF000000
+#define GICD_SPENDSGIR3_SGI15_OFFSET  0x18
+
+#ifndef __ASSEMBLER__
+
+/* GIC common API's */
+void plat_ls_gic_driver_init(const uintptr_t nxp_gicd_addr,
+			     const uintptr_t nxp_gicc_addr,
+			     uint8_t plat_core_count,
+			     interrupt_prop_t *ls_interrupt_props,
+			     uint8_t ls_interrupt_prop_count,
+			     uint32_t *target_mask_array);
+void plat_ls_gic_init(void);
+void plat_ls_gic_cpuif_enable(void);
+void plat_ls_gic_cpuif_disable(void);
+void plat_ls_gic_redistif_on(void);
+void plat_ls_gic_redistif_off(void);
+void plat_gic_pcpu_init(void);
+/* GIC utility functions */
+void get_gic_offset(uint32_t *gicc_base, uint32_t *gicd_base);
+#endif
+
+#endif /* PLAT_GICV2_H */
diff --git a/include/drivers/nxp/gic/gicv3/plat_gic.h b/include/drivers/nxp/gic/gicv3/plat_gic.h
new file mode 100644
index 0000000..794b06b
--- /dev/null
+++ b/include/drivers/nxp/gic/gicv3/plat_gic.h
@@ -0,0 +1,120 @@
+/*
+ * Copyright 2021-2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#ifndef PLAT_GICV3_H
+#define PLAT_GICV3_H
+
+#include <drivers/arm/gicv3.h>
+
+ /* offset between redistributors */
+#define GIC_RD_OFFSET       0x00020000
+ /* offset between SGI's */
+#define GIC_SGI_OFFSET      0x00020000
+ /* offset from rd base to sgi base */
+#define GIC_RD_2_SGI_OFFSET 0x00010000
+
+ /* register offsets */
+#define GICD_CTLR_OFFSET        0x0
+#define GICD_CLR_SPI_SR         0x58
+#define GICD_IGROUPR_2          0x88
+#define GICD_ISENABLER_1        0x104
+#define GICD_ICENABLER_1        0x184
+#define GICD_ISENABLER_2        0x108
+#define GICD_ICENABLER_2        0x188
+#define GICD_ISENABLER_3        0x10c
+#define GICD_ICENABLER_3        0x18c
+#define GICD_ICPENDR_2          0x288
+#define GICD_ICACTIVER_2        0x388
+#define GICD_IPRIORITYR_22      0x458
+#define GICD_ICFGR_5            0xC14
+#define GICD_IGRPMODR_2         0xD08
+
+#define GICD_IROUTER60_OFFSET   0x61e0
+#define GICD_IROUTER76_OFFSET   0x6260
+#define GICD_IROUTER89_OFFSET   0x62C8
+#define GICD_IROUTER112_OFFSET  0x6380
+#define GICD_IROUTER113_OFFSET  0x6388
+
+#define GICR_ICENABLER0_OFFSET  0x180
+#define GICR_CTLR_OFFSET        0x0
+#define GICR_IGROUPR0_OFFSET    0x80
+#define GICR_IGRPMODR0_OFFSET   0xD00
+#define GICR_IPRIORITYR3_OFFSET 0x40C
+#define GICR_ICPENDR0_OFFSET    0x280
+#define GICR_ISENABLER0_OFFSET  0x100
+#define GICR_TYPER_OFFSET       0x8
+#define GICR_WAKER_OFFSET       0x14
+#define GICR_ICACTIVER0_OFFSET  0x380
+#define GICR_ICFGR0_OFFSET      0xC00
+
+ /* bitfield masks */
+#define GICD_CTLR_EN_GRP_MASK   0x7
+#define GICD_CTLR_EN_GRP_1NS    0x2
+#define GICD_CTLR_EN_GRP_1S     0x4
+#define GICD_CTLR_EN_GRP_0      0x1
+#define GICD_CTLR_ARE_S_MASK    0x10
+#define GICD_CTLR_RWP           0x80000000
+
+#define GICR_ICENABLER0_SGI15   0x00008000
+#define GICR_CTLR_RWP           0x8
+#define GICR_IGROUPR0_SGI15     0x00008000
+#define GICR_IGRPMODR0_SGI15    0x00008000
+#define GICR_ISENABLER0_SGI15   0x00008000
+#define GICR_IPRIORITYR3_SGI15_MASK  0xFF000000
+#define GICR_ICPENDR0_SGI15     0x8000
+
+#define GIC_SPI_89_MASK         0x02000000
+#define GIC_SPI89_PRIORITY_MASK 0xFF00
+#define GIC_IRM_SPI89           0x80000000
+
+#define GICD_IROUTER_VALUE      0x100
+#define GICD_ISENABLER_1_VALUE  0x10000000
+#define GICD_ISENABLER_2_VALUE  0x100
+#define GICD_ISENABLER_3_VALUE  0x20100
+#define GICR_WAKER_SLEEP_BIT    0x2
+#define GICR_WAKER_ASLEEP       (1 << 2 | 1 << 1)
+
+#define ICC_SRE_EL3_SRE          0x1
+#define ICC_IGRPEN0_EL1_EN       0x1
+#define ICC_CTLR_EL3_CBPR_EL1S   0x1
+#define ICC_CTLR_EL3_RM          0x20
+#define ICC_CTLR_EL3_EOIMODE_EL3 0x4
+#define ICC_CTLR_EL3_PMHE        0x40
+#define ICC_PMR_EL1_P_FILTER     0xFF
+#define ICC_IAR0_EL1_SGI15       0xF
+#define ICC_SGI0R_EL1_INTID      0x0F000000
+#define ICC_IAR0_INTID_SPI_89    0x59
+
+#define  ICC_IGRPEN1_EL1 S3_0_C12_C12_7
+#define  ICC_PMR_EL1     S3_0_C4_C6_0
+#define  ICC_SRE_EL3     S3_6_C12_C12_5
+#define  ICC_CTLR_EL3    S3_6_C12_C12_4
+#define  ICC_SRE_EL2     S3_4_C12_C9_5
+#define  ICC_CTLR_EL1    S3_0_C12_C12_4
+
+#ifndef __ASSEMBLER__
+
+/* GIC common API's */
+typedef unsigned int (*my_core_pos_fn)(void);
+
+void plat_ls_gic_driver_init(const uintptr_t nxp_gicd_addr,
+			     const uintptr_t nxp_gicr_addr,
+			     uint8_t plat_core_count,
+			     interrupt_prop_t *ls_interrupt_props,
+			     uint8_t ls_interrupt_prop_count,
+			     uintptr_t *target_mask_array,
+			     mpidr_hash_fn mpidr_to_core_pos);
+//void plat_ls_gic_driver_init(void);
+void plat_ls_gic_init(void);
+void plat_ls_gic_cpuif_enable(void);
+void plat_ls_gic_cpuif_disable(void);
+void plat_ls_gic_redistif_on(void);
+void plat_ls_gic_redistif_off(void);
+void plat_gic_pcpu_init(void);
+#endif
+
+#endif /* PLAT_GICV3_H */
diff --git a/include/drivers/nxp/gpio/nxp_gpio.h b/include/drivers/nxp/gpio/nxp_gpio.h
new file mode 100644
index 0000000..df75840
--- /dev/null
+++ b/include/drivers/nxp/gpio/nxp_gpio.h
@@ -0,0 +1,53 @@
+/*
+ * Copyright 2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#ifndef PLAT_GPIO_H
+#define PLAT_GPIO_H
+
+#include <endian.h>
+#include <lib/mmio.h>
+
+/* GPIO Register offset */
+#define GPIO_SEL_MASK		0x7F
+#define GPIO_BIT_MASK		0x1F
+#define GPDIR_REG_OFFSET	0x0
+#define GPDAT_REG_OFFSET	0x8
+
+#define GPIO_ID_BASE_ADDR_SHIFT 5U
+#define GPIO_BITS_PER_BASE_REG	32U
+
+#define GPIO_0			0
+#define GPIO_1			1
+#define GPIO_2			2
+#define GPIO_3			3
+
+#define GPIO_SUCCESS		0x0
+#define GPIO_FAILURE		0x1
+
+#ifdef NXP_GPIO_BE
+#define gpio_read32(a)           bswap32(mmio_read_32((uintptr_t)(a)))
+#define gpio_write32(a, v)       mmio_write_32((uintptr_t)(a), bswap32(v))
+#elif defined(NXP_GPIO_LE)
+#define gpio_read32(a)           mmio_read_32((uintptr_t)(a))
+#define gpio_write32(a, v)       mmio_write_32((uintptr_t)(a), (v))
+#else
+#error Please define GPIO register endianness
+#endif
+
+typedef struct {
+	uintptr_t gpio1_base_addr;
+	uintptr_t gpio2_base_addr;
+	uintptr_t gpio3_base_addr;
+	uintptr_t gpio4_base_addr;
+} gpio_init_info_t;
+
+void gpio_init(gpio_init_info_t *gpio_init_data);
+uint32_t *select_gpio_n_bitnum(uint32_t povdd_gpio, uint32_t *bit_num);
+int clr_gpio_bit(uint32_t *gpio_base_addr, uint32_t bit_num);
+int set_gpio_bit(uint32_t *gpio_base_addr, uint32_t bit_num);
+
+#endif /* PLAT_GPIO_H */
diff --git a/include/drivers/nxp/i2c/i2c.h b/include/drivers/nxp/i2c/i2c.h
new file mode 100644
index 0000000..85e6eb4
--- /dev/null
+++ b/include/drivers/nxp/i2c/i2c.h
@@ -0,0 +1,52 @@
+/*
+ * Copyright 2016-2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+
+#ifndef I2C_H
+#define I2C_H
+
+#include <lib/mmio.h>
+
+#define I2C_TIMEOUT	1000	/* ms */
+
+#define I2C_FD_CONSERV	0x7e
+#define I2C_CR_DIS	(1 << 7)
+#define I2C_CR_EN	(0 << 7)
+#define I2C_CR_MA	(1 << 5)
+#define I2C_CR_TX	(1 << 4)
+#define I2C_CR_TX_NAK	(1 << 3)
+#define I2C_CR_RSTA	(1 << 2)
+#define I2C_SR_BB	(1 << 5)
+#define I2C_SR_IDLE	(0 << 5)
+#define I2C_SR_AL	(1 << 4)
+#define I2C_SR_IF	(1 << 1)
+#define I2C_SR_RX_NAK	(1 << 0)
+#define I2C_SR_RST	(I2C_SR_AL | I2C_SR_IF)
+
+#define I2C_GLITCH_EN	0x8
+
+#define i2c_in(a)	mmio_read_8((uintptr_t)(a))
+#define i2c_out(a, v)	mmio_write_8((uintptr_t)(a), (v))
+
+struct ls_i2c {
+	unsigned char ad;	/* I2c Bus Address Register */
+	unsigned char fd;	/* I2c Bus Frequency Dividor Register */
+	unsigned char cr;	/* I2c Bus Control Register */
+	unsigned char sr;	/* I2c Bus Status Register */
+	unsigned char dr;	/* I2C Bus Data I/O Register */
+	unsigned char ic;	/* I2C Bus Interrupt Config Register */
+	unsigned char dbg;	/* I2C Bus Debug Register */
+};
+
+void i2c_init(uintptr_t nxp_i2c_addr);
+int i2c_read(unsigned char chip, int addr, int alen,
+	     unsigned char *buf, int len);
+int i2c_write(unsigned char chip, int addr, int alen,
+	      const unsigned char *buf, int len);
+int i2c_probe_chip(unsigned char chip);
+
+#endif /* I2C_H */
diff --git a/include/drivers/nxp/ifc/ifc_nand.h b/include/drivers/nxp/ifc/ifc_nand.h
new file mode 100644
index 0000000..dbcd762
--- /dev/null
+++ b/include/drivers/nxp/ifc/ifc_nand.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef IFC_NAND_H
+#define IFC_NAND_H
+
+#define NXP_IFC_SRAM_BUFFER_SIZE	UL(0x100000)	/* 1M */
+
+int ifc_nand_init(uintptr_t *block_dev_spec,
+			uintptr_t ifc_region_addr,
+			uintptr_t ifc_register_addr,
+			size_t ifc_sram_size,
+			uintptr_t ifc_nand_blk_offset,
+			size_t ifc_nand_blk_size);
+
+#endif /*IFC_NAND_H*/
diff --git a/include/drivers/nxp/ifc/ifc_nor.h b/include/drivers/nxp/ifc/ifc_nor.h
new file mode 100644
index 0000000..ee14460
--- /dev/null
+++ b/include/drivers/nxp/ifc/ifc_nor.h
@@ -0,0 +1,14 @@
+/*
+ * Copyright 2020-2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#ifndef IFC_NOR_H
+#define IFC_NOR_H
+
+
+int ifc_nor_init(uintptr_t flash_addr, size_t flash_size);
+
+#endif /*IFC_NOR_H*/
diff --git a/include/drivers/nxp/interconnect/ls_interconnect.h b/include/drivers/nxp/interconnect/ls_interconnect.h
new file mode 100644
index 0000000..777089c
--- /dev/null
+++ b/include/drivers/nxp/interconnect/ls_interconnect.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2020-2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#ifndef LS_INTERCONNECT_H
+#define LS_INTERCONNECT_H
+
+#if (INTERCONNECT == CCI400)
+#define CCI_TERMINATE_BARRIER_TX	0x8
+#endif
+
+/* Interconnect CCI/CCN functions */
+void plat_ls_interconnect_enter_coherency(unsigned int num_clusters);
+void plat_ls_interconnect_exit_coherency(void);
+
+#endif
diff --git a/include/drivers/nxp/pmu/pmu.h b/include/drivers/nxp/pmu/pmu.h
new file mode 100644
index 0000000..28199e8
--- /dev/null
+++ b/include/drivers/nxp/pmu/pmu.h
@@ -0,0 +1,75 @@
+/*
+ * Copyright 2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#ifndef PMU_H
+#define PMU_H
+
+/* PMU Registers' OFFSET */
+#define PMU_PCPW20SR_OFFSET		0x830
+#define PMU_CLL2FLUSHSETR_OFFSET	0x1110
+#define PMU_CLSL2FLUSHCLRR_OFFSET	0x1114
+#define PMU_CLL2FLUSHSR_OFFSET		0x1118
+#define PMU_POWMGTCSR_VAL		(1 << 20)
+
+/* PMU Registers */
+#define CORE_TIMEBASE_ENBL_OFFSET	0x8A0
+#define CLUST_TIMER_BASE_ENBL_OFFSET	0x18A0
+
+#define PMU_IDLE_CLUSTER_MASK		0x2
+#define PMU_FLUSH_CLUSTER_MASK		0x2
+#define PMU_IDLE_CORE_MASK		0xfe
+
+/* pmu register offsets and bitmaps */
+#define PMU_POWMGTDCR0_OFFSET		0xC20
+#define PMU_POWMGTCSR_OFFSET		0x4000
+#define PMU_CLAINACTSETR_OFFSET		0x1100
+#define PMU_CLAINACTCLRR_OFFSET		0x1104
+#define PMU_CLSINACTSETR_OFFSET		0x1108
+#define PMU_CLSINACTCLRR_OFFSET		0x110C
+#define PMU_CLL2FLUSHSETR_OFFSET	0x1110
+#define PMU_CLL2FLUSHCLRR_OFFSET	0x1114
+#define PMU_IPPDEXPCR0_OFFSET		0x4040
+#define PMU_IPPDEXPCR1_OFFSET		0x4044
+#define PMU_IPPDEXPCR2_OFFSET		0x4048
+#define PMU_IPPDEXPCR3_OFFSET		0x404C
+#define PMU_IPPDEXPCR4_OFFSET		0x4050
+#define PMU_IPPDEXPCR5_OFFSET		0x4054
+#define PMU_IPPDEXPCR6_OFFSET		0x4058
+#define PMU_IPSTPCR0_OFFSET		0x4120
+#define PMU_IPSTPCR1_OFFSET		0x4124
+#define PMU_IPSTPCR2_OFFSET		0x4128
+#define PMU_IPSTPCR3_OFFSET		0x412C
+#define PMU_IPSTPCR4_OFFSET		0x4130
+#define PMU_IPSTPCR5_OFFSET		0x4134
+#define PMU_IPSTPCR6_OFFSET		0x4138
+#define PMU_IPSTPACKSR0_OFFSET		0x4140
+#define PMU_IPSTPACKSR1_OFFSET		0x4144
+#define PMU_IPSTPACKSR2_OFFSET		0x4148
+#define PMU_IPSTPACKSR3_OFFSET		0x414C
+#define PMU_IPSTPACKSR4_OFFSET		0x4150
+#define PMU_IPSTPACKSR5_OFFSET		0x4154
+#define PMU_IPSTPACKSR6_OFFSET		0x4158
+
+#define CLAINACT_DISABLE_ACP		0xFF
+#define CLSINACT_DISABLE_SKY		0xFF
+#define POWMGTDCR_STP_OV_EN		0x1
+#define POWMGTCSR_LPM20_REQ		0x00100000
+
+/* Used by PMU */
+#define DEVDISR1_MASK			0x024F3504
+#define DEVDISR2_MASK			0x0003FFFF
+#define DEVDISR3_MASK			0x0000303F
+#define DEVDISR4_MASK			0x0000FFFF
+#define DEVDISR5_MASK			0x00F07603
+#define DEVDISR6_MASK			0x00000001
+
+#ifndef __ASSEMBLER__
+void enable_timer_base_to_cluster(uintptr_t nxp_pmu_addr);
+void enable_core_tb(uintptr_t nxp_pmu_addr);
+#endif /* __ASSEMBLER__ */
+
+#endif
diff --git a/include/drivers/nxp/qspi/qspi.h b/include/drivers/nxp/qspi/qspi.h
new file mode 100644
index 0000000..db11c3b
--- /dev/null
+++ b/include/drivers/nxp/qspi/qspi.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright 2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#ifndef QSPI_H
+#define QSPI_H
+
+#include <endian.h>
+#include <lib/mmio.h>
+
+#define CHS_QSPI_MCR			0x01550000
+#define CHS_QSPI_64LE			0xC
+
+#ifdef NXP_QSPI_BE
+#define qspi_in32(a)           bswap32(mmio_read_32((uintptr_t)(a)))
+#define qspi_out32(a, v)       mmio_write_32((uintptr_t)(a), bswap32(v))
+#elif defined(NXP_QSPI_LE)
+#define qspi_in32(a)           mmio_read_32((uintptr_t)(a))
+#define qspi_out32(a, v)       mmio_write_32((uintptr_t)(a), (v))
+#else
+#error Please define CCSR QSPI register endianness
+#endif
+
+int qspi_io_setup(uintptr_t nxp_qspi_flash_addr,
+		  size_t nxp_qspi_flash_size,
+		  uintptr_t fip_offset);
+#endif /* __QSPI_H__ */
diff --git a/include/drivers/nxp/sd/sd_mmc.h b/include/drivers/nxp/sd/sd_mmc.h
new file mode 100644
index 0000000..32b41f1
--- /dev/null
+++ b/include/drivers/nxp/sd/sd_mmc.h
@@ -0,0 +1,337 @@
+/*
+ * Copyright (c) 2015, 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#ifndef SD_MMC_H
+#define SD_MMC_H
+
+#include <lib/mmio.h>
+
+/* operating freq */
+#define CARD_IDENTIFICATION_FREQ	400000
+#define SD_SS_25MHZ	20000000
+#define SD_HS_50MHZ	40000000
+#define MMC_SS_20MHZ	15000000
+#define MMC_HS_26MHZ	20000000
+#define MMC_HS_52MHZ	40000000
+
+/* Need to check this value ? */
+#define MAX_PLATFORM_CLOCK	800000000
+
+/* eSDHC system control register defines */
+#define ESDHC_SYSCTL_DTOCV(t)		(((t) & 0xF) << 16)
+#define ESDHC_SYSCTL_SDCLKFS(f)		(((f) & 0xFF) << 8)
+#define ESDHC_SYSCTL_DVS(d)		(((d) & 0xF) << 4)
+#define ESDHC_SYSCTL_SDCLKEN		(0x00000008)
+#define ESDHC_SYSCTL_RSTA		(0x01000000)
+
+/* Data timeout counter value. SDHC_CLK x 227 */
+#define TIMEOUT_COUNTER_SDCLK_2_27	0xE
+#define ESDHC_SYSCTL_INITA	0x08000000
+
+/* eSDHC interrupt status enable register defines */
+#define ESDHC_IRQSTATEN_CINS	0x00000040
+#define ESDHC_IRQSTATEN_BWR	0x00000010
+
+/* eSDHC interrupt status register defines */
+#define ESDHC_IRQSTAT_DMAE	(0x10000000)
+#define ESDHC_IRQSTAT_AC12E	(0x01000000)
+#define ESDHC_IRQSTAT_DEBE	(0x00400000)
+#define ESDHC_IRQSTAT_DCE	(0x00200000)
+#define ESDHC_IRQSTAT_DTOE	(0x00100000)
+#define ESDHC_IRQSTAT_CIE	(0x00080000)
+#define ESDHC_IRQSTAT_CEBE	(0x00040000)
+#define ESDHC_IRQSTAT_CCE	(0x00020000)
+#define ESDHC_IRQSTAT_CTOE	(0x00010000)
+#define ESDHC_IRQSTAT_CINT	(0x00000100)
+#define ESDHC_IRQSTAT_CRM	(0x00000080)
+#define ESDHC_IRQSTAT_CINS	(0x00000040)
+#define ESDHC_IRQSTAT_BRR	(0x00000020)
+#define ESDHC_IRQSTAT_BWR	(0x00000010)
+#define ESDHC_IRQSTAT_DINT	(0x00000008)
+#define ESDHC_IRQSTAT_BGE	(0x00000004)
+#define ESDHC_IRQSTAT_TC	(0x00000002)
+#define ESDHC_IRQSTAT_CC	(0x00000001)
+#define ESDHC_IRQSTAT_CMD_ERR	(ESDHC_IRQSTAT_CIE |\
+			ESDHC_IRQSTAT_CEBE |\
+			ESDHC_IRQSTAT_CCE)
+#define ESDHC_IRQSTAT_DATA_ERR	(ESDHC_IRQSTAT_DEBE |\
+			ESDHC_IRQSTAT_DCE |\
+			ESDHC_IRQSTAT_DTOE)
+#define ESDHC_IRQSTAT_CLEAR_ALL	(0xFFFFFFFF)
+
+/* eSDHC present state register defines */
+#define ESDHC_PRSSTAT_CLSL	0x00800000
+#define ESDHC_PRSSTAT_WPSPL	0x00080000
+#define ESDHC_PRSSTAT_CDPL	0x00040000
+#define ESDHC_PRSSTAT_CINS	0x00010000
+#define ESDHC_PRSSTAT_BREN	0x00000800
+#define ESDHC_PRSSTAT_BWEN	0x00000400
+#define ESDHC_PRSSTAT_RTA	0x00000200
+#define ESDHC_PRSSTAT_WTA	0x00000100
+#define ESDHC_PRSSTAT_SDOFF	0x00000080
+#define ESDHC_PRSSTAT_PEROFF	0x00000040
+#define ESDHC_PRSSTAT_HCKOFF	0x00000020
+#define ESDHC_PRSSTAT_IPGOFF	0x00000010
+#define ESDHC_PRSSTAT_DLA	0x00000004
+#define ESDHC_PRSSTAT_CDIHB	0x00000002
+#define ESDHC_PRSSTAT_CIHB	0x00000001
+
+/* eSDHC protocol control register defines */
+#define ESDHC_PROCTL_EMODE_LE	0x00000020
+#define ESDHC_PROCTL_DTW_1BIT	0x00000000
+#define ESDHC_PROCTL_DTW_4BIT	0x00000002
+#define ESDHC_PROCTL_DTW_8BIT	0x00000004
+
+/* Watermark Level Register (WML) */
+#define ESDHC_WML_RD_WML(w)	((w) & 0x7F)
+#define ESDHC_WML_WR_WML(w)	(((w) & 0x7F) << 16)
+#define ESDHC_WML_RD_BRST(w)	(((w) & 0xF) << 8)
+#define ESDHC_WML_WR_BRST(w)	(((w) & 0xF) << 24)
+#define ESDHC_WML_WR_BRST_MASK	(0x0F000000)
+#define ESDHC_WML_RD_BRST_MASK	(0x00000F00)
+#define ESDHC_WML_RD_WML_MASK	(0x0000007F)
+#define ESDHC_WML_WR_WML_MASK	(0x007F0000)
+#define WML_512_BYTES		(0x0)
+#define BURST_128_BYTES	(0x0)
+
+/* eSDHC control register define */
+#define ESDHC_DCR_SNOOP		0x00000040
+
+/* ESDHC Block attributes register */
+#define ESDHC_BLKATTR_BLKCNT(c)	(((c) & 0xffff) << 16)
+#define ESDHC_BLKATTR_BLKSZE(s)	((s) & 0xfff)
+
+/* Transfer Type Register */
+#define ESDHC_XFERTYP_CMD(c)	(((c) & 0x3F) << 24)
+#define ESDHC_XFERTYP_CMDTYP_NORMAL	(0x0)
+#define ESDHC_XFERTYP_CMDTYP_SUSPEND	(0x00400000)
+#define ESDHC_XFERTYP_CMDTYP_RESUME	(0x00800000)
+#define ESDHC_XFERTYP_CMDTYP_ABORT	(0x00C00000)
+#define ESDHC_XFERTYP_DPSEL	(0x00200000)
+#define ESDHC_XFERTYP_CICEN	(0x00100000)
+#define ESDHC_XFERTYP_CCCEN	(0x00080000)
+#define ESDHC_XFERTYP_RSPTYP_NONE	(0x0)
+#define ESDHC_XFERTYP_RSPTYP_136	(0x00010000)
+#define ESDHC_XFERTYP_RSPTYP_48	(0x00020000)
+#define ESDHC_XFERTYP_RSPTYP_48_BUSY	(0x00030000)
+#define ESDHC_XFERTYP_MSBSEL	(0x00000020)
+#define ESDHC_XFERTYP_DTDSEL	(0x00000010)
+#define ESDHC_XFERTYP_AC12EN	(0x00000004)
+#define ESDHC_XFERTYP_BCEN	(0x00000002)
+#define ESDHC_XFERTYP_DMAEN	(0x00000001)
+
+#define MMC_VDD_HIGH_VOLTAGE	0x00000100
+
+/* command index */
+#define CMD0	0
+#define CMD1	1
+#define CMD2	2
+#define CMD3	3
+#define CMD5	5
+#define CMD6	6
+#define CMD7	7
+#define CMD8	8
+#define CMD9	9
+#define CMD12	12
+#define CMD13	13
+#define CMD14	14
+#define CMD16	16
+#define CMD17	17
+#define CMD18	18
+#define CMD19	19
+#define CMD24	24
+#define CMD41	41
+#define CMD42	42
+#define CMD51	51
+#define CMD55	55
+#define CMD56	56
+#define ACMD6	CMD6
+#define ACMD13	CMD13
+#define ACMD41	CMD41
+#define ACMD42	CMD42
+#define ACMD51	CMD51
+
+/* commands abbreviations */
+#define CMD_GO_IDLE_STATE	CMD0
+#define CMD_MMC_SEND_OP_COND	CMD1
+#define CMD_ALL_SEND_CID	CMD2
+#define CMD_SEND_RELATIVE_ADDR	CMD3
+#define CMD_SET_DSR	CMD4
+#define CMD_SWITCH_FUNC	CMD6
+#define CMD_SELECT_CARD	CMD7
+#define CMD_DESELECT_CARD	CMD7
+#define CMD_SEND_IF_COND	CMD8
+#define CMD_MMC_SEND_EXT_CSD	CMD8
+#define CMD_SEND_CSD	CMD9
+#define CMD_SEND_CID	CMD10
+#define CMD_STOP_TRANSMISSION	CMD12
+#define CMD_SEND_STATUS	CMD13
+#define CMD_BUS_TEST_R	CMD14
+#define CMD_GO_INACTIVE_STATE	CMD15
+#define CMD_SET_BLOCKLEN	CMD16
+#define CMD_READ_SINGLE_BLOCK	CMD17
+#define CMD_READ_MULTIPLE_BLOCK	CMD18
+#define CMD_WRITE_SINGLE_BLOCK	CMD24
+#define CMD_BUS_TEST_W	CMD19
+#define CMD_APP_CMD	CMD55
+#define CMD_GEN_CMD	CMD56
+#define CMD_SET_BUS_WIDTH	ACMD6
+#define CMD_SD_STATUS	ACMD13
+#define CMD_SD_SEND_OP_COND	ACMD41
+#define CMD_SET_CLR_CARD_DETECT	ACMD42
+#define CMD_SEND_SCR	ACMD51
+
+/* MMC card spec version */
+#define MMC_CARD_VERSION_1_2	0
+#define MMC_CARD_VERSION_1_4	1
+#define MMC_CARD_VERSION_2_X	2
+#define MMC_CARD_VERSION_3_X	3
+#define MMC_CARD_VERSION_4_X	4
+
+/* SD Card Spec Version */
+/* May need to add version 3 here? */
+#define SD_CARD_VERSION_1_0	0
+#define SD_CARD_VERSION_1_10	1
+#define SD_CARD_VERSION_2_0	2
+
+/* card types */
+#define MMC_CARD	0
+#define SD_CARD		1
+#define NOT_SD_CARD	MMC_CARD
+
+/* Card rca */
+#define SD_MMC_CARD_RCA	0x1
+#define BLOCK_LEN_512	512
+
+/* card state */
+#define STATE_IDLE	0
+#define STATE_READY	1
+#define STATE_IDENT	2
+#define STATE_STBY	3
+#define STATE_TRAN	4
+#define STATE_DATA	5
+#define STATE_RCV	6
+#define STATE_PRG	7
+#define STATE_DIS	8
+
+/* Card OCR register */
+/* VDD voltage window 1,65 to 1.95 */
+#define MMC_OCR_VDD_165_195	0x00000080
+/* VDD voltage window 2.7-2.8 */
+#define MMC_OCR_VDD_FF8	0x00FF8000
+#define MMC_OCR_CCS	0x40000000/* Card Capacity */
+#define MMC_OCR_BUSY	0x80000000/* busy bit */
+#define SD_OCR_HCS	0x40000000/* High capacity host */
+#define MMC_OCR_SECTOR_MODE	0x40000000/* Access Mode as Sector */
+
+/* mmc Switch function */
+#define SET_EXT_CSD_HS_TIMING	0x03B90100/* set High speed */
+
+/* check supports switching or not */
+#define SD_SWITCH_FUNC_CHECK_MODE	0x00FFFFF1
+#define SD_SWITCH_FUNC_SWITCH_MODE	0x80FFFFF1/* switch */
+#define SD_SWITCH_FUNC_HIGH_SPEED	0x02/* HIGH SPEED FUNC */
+#define SWITCH_ERROR		0x00000080
+
+/* errors in sending commands */
+#define RESP_TIMEOUT	0x1
+#define COMMAND_ERROR	0x2
+/* error in response */
+#define R1_ERROR	(1 << 19)
+#define R1_CURRENT_STATE(x)	(((x) & 0x00001E00) >> 9)
+
+/* Host Controller Capabilities */
+#define ESDHC_HOSTCAPBLT_DMAS           (0x00400000)
+
+
+/* SD/MMC memory map */
+struct esdhc_regs {
+	uint32_t dsaddr;	/* dma system address */
+	uint32_t blkattr;	/* Block attributes */
+	uint32_t cmdarg;	/* Command argument */
+	uint32_t xfertyp;	/* Command transfer type */
+	uint32_t cmdrsp[4];	/* Command response0,1,2,3 */
+	uint32_t datport;	/* Data buffer access port */
+	uint32_t prsstat;	/* Present state */
+	uint32_t proctl;	/* Protocol control */
+	uint32_t sysctl;	/* System control */
+	uint32_t irqstat;	/* Interrupt status */
+	uint32_t irqstaten;	/* Interrupt status enable */
+	uint32_t irqsigen;	/* Interrupt signal enable */
+	uint32_t autoc12err;	/* Auto CMD12 status */
+	uint32_t hostcapblt;	/* Host controller capabilities */
+	uint32_t wml;	/* Watermark level */
+	uint32_t res1[2];
+	uint32_t fevt;	/* Force event */
+	uint32_t res2;
+	uint32_t adsaddrl;
+	uint32_t adsaddrh;
+	uint32_t res3[39];
+	uint32_t hostver;	/* Host controller version */
+	uint32_t res4;
+	uint32_t dmaerr;	/* DMA error address */
+	uint32_t dmaerrh;	/* DMA error address high */
+	uint32_t dmaerrattr; /* DMA error atrribute */
+	uint32_t res5;
+	uint32_t hostcapblt2;/* Host controller capabilities2 */
+	uint32_t res6[2];
+	uint32_t tcr;	/* Tuning control */
+	uint32_t res7[7];
+	uint32_t dirctrl;	/* Direction control */
+	uint32_t ccr;	/* Clock control */
+	uint32_t res8[177];
+	uint32_t ctl;	/* Control register */
+};
+
+/* SD/MMC card attributes */
+struct card_attributes {
+	uint32_t type;	/* sd or mmc card */
+	uint32_t version;	/* version */
+	uint32_t block_len;	/* block length */
+	uint32_t bus_freq;	/* sdhc bus frequency */
+	uint16_t rca;	/* relative card address */
+	uint8_t is_high_capacity;	/* high capacity */
+};
+
+struct mmc {
+	struct esdhc_regs *esdhc_regs;
+	struct card_attributes card;
+
+	uint32_t block_len;
+	uint32_t voltages_caps;	/* supported voltaes */
+	uint32_t dma_support;	/* DMA support */
+};
+
+enum cntrl_num {
+	SDHC1 = 0,
+	SDHC2
+};
+
+int sd_emmc_init(uintptr_t *block_dev_spec,
+			uintptr_t nxp_esdhc_addr,
+			size_t nxp_sd_block_offset,
+			size_t nxp_sd_block_size,
+			bool card_detect);
+
+int esdhc_emmc_init(struct mmc *mmc, bool card_detect);
+int esdhc_read(struct mmc *mmc, uint32_t src_offset, uintptr_t dst,
+	       size_t size);
+int esdhc_write(struct mmc *mmc, uintptr_t src, uint32_t dst_offset,
+		size_t size);
+
+#ifdef NXP_ESDHC_BE
+#define esdhc_in32(a)           bswap32(mmio_read_32((uintptr_t)(a)))
+#define esdhc_out32(a, v)       mmio_write_32((uintptr_t)(a), bswap32(v))
+#elif defined(NXP_ESDHC_LE)
+#define esdhc_in32(a)           mmio_read_32((uintptr_t)(a))
+#define esdhc_out32(a, v)       mmio_write_32((uintptr_t)(a), (v))
+#else
+#error Please define CCSR ESDHC register endianness
+#endif
+
+#endif /*SD_MMC_H*/
diff --git a/include/drivers/nxp/sec_mon/snvs.h b/include/drivers/nxp/sec_mon/snvs.h
new file mode 100644
index 0000000..4455383
--- /dev/null
+++ b/include/drivers/nxp/sec_mon/snvs.h
@@ -0,0 +1,86 @@
+/*
+ * Copyright 2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#ifndef SNVS_H
+#define SNVS_H
+
+
+#ifndef __ASSEMBLER__
+
+#include <endian.h>
+#include <stdbool.h>
+
+#include <lib/mmio.h>
+
+struct snvs_regs {
+	uint32_t reserved1;
+	uint32_t hp_com;		/* 0x04 SNVS_HP Command Register */
+	uint32_t reserved2[3];
+	uint32_t hp_stat;		/* 0x14 SNVS_HP Status Register */
+};
+
+#ifdef NXP_SNVS_BE
+#define snvs_read32(a)           bswap32(mmio_read_32((uintptr_t)(a)))
+#define snvs_write32(a, v)       mmio_write_32((uintptr_t)(a), bswap32((v)))
+#elif defined(NXP_SNVS_LE)
+#define snvs_read32(a)           mmio_read_32((uintptr_t)(a))
+#define snvs_write32(a, v)       mmio_write_32((uintptr_t)(a), (v))
+#else
+#error Please define CCSR SNVS register endianness
+#endif
+
+void snvs_init(uintptr_t nxp_snvs_addr);
+uint32_t get_snvs_state(void);
+void transition_snvs_non_secure(void);
+void transition_snvs_soft_fail(void);
+uint32_t transition_snvs_trusted(void);
+uint32_t transition_snvs_secure(void);
+
+uint32_t snvs_read_lp_gpr_bit(uint32_t offset, uint32_t bit_pos);
+void snvs_write_lp_gpr_bit(uint32_t offset, uint32_t bit_pos, bool flag_val);
+
+void snvs_disable_zeroize_lp_gpr(void);
+
+#if defined(NXP_NV_SW_MAINT_LAST_EXEC_DATA) && defined(NXP_COINED_BB)
+uint32_t snvs_read_app_data(void);
+uint32_t snvs_read_app_data_bit(uint32_t bit_pos);
+void snvs_clear_app_data(void);
+void snvs_write_app_data_bit(uint32_t bit_pos);
+#endif
+
+#endif	/*  __ASSEMBLER__  */
+
+/* SSM_ST field in SNVS status reg */
+#define HPSTS_CHECK_SSM_ST	0x900	/* SNVS is in check state */
+#define HPSTS_NON_SECURE_SSM_ST	0xb00	/* SNVS is in non secure state */
+#define HPSTS_TRUST_SSM_ST	0xd00	/* SNVS is in trusted state */
+#define HPSTS_SECURE_SSM_ST	0xf00	/* SNVS is in secure state */
+#define HPSTS_SOFT_FAIL_SSM_ST	0x300	/* SNVS is in soft fail state */
+#define HPSTS_MASK_SSM_ST	0xf00	/* SSM_ST field mask in SNVS reg */
+
+/* SNVS register bits */
+#define HPCOM_SW_SV		0x100	/* Security Violation bit */
+#define HPCOM_SW_FSV		0x200	/* Fatal Security Violation bit */
+#define HPCOM_SSM_ST		0x1	/* SSM_ST field in SNVS command reg */
+#define HPCOM_SSM_ST_DIS	0x2	/* Disable Secure to Trusted State */
+#define HPCOM_SSM_SFNS_DIS	0x4	/* Disable Soft Fail to Non-Secure */
+
+#define NXP_LP_GPR0_OFFSET	0x90
+#define NXP_LPCR_OFFSET		0x38
+#define NXP_GPR_Z_DIS_BIT	24
+
+#ifdef NXP_COINED_BB
+
+#ifndef NXP_APP_DATA_LP_GPR_OFFSET
+#define NXP_APP_DATA_LP_GPR_OFFSET NXP_LP_GPR0_OFFSET
+#endif
+
+#define NXP_LPGPR_ZEROTH_BIT		0
+
+#endif	/* NXP_COINED_BB */
+
+#endif	/* SNVS_H  */
diff --git a/include/drivers/nxp/sfp/fuse_prov.h b/include/drivers/nxp/sfp/fuse_prov.h
new file mode 100644
index 0000000..e015318
--- /dev/null
+++ b/include/drivers/nxp/sfp/fuse_prov.h
@@ -0,0 +1,83 @@
+/*
+ * Copyright 2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#if !defined(FUSE_PROV_H) && defined(POLICY_FUSE_PROVISION)
+#define FUSE_PROV_H
+
+#include <endian.h>
+#include <lib/mmio.h>
+
+#define MASK_NONE		U(0xFFFFFFFF)
+#define ERROR_WRITE		U(0xA)
+#define ERROR_ALREADY_BLOWN	U(0xB)
+
+/* Flag bit shifts */
+#define FLAG_POVDD_SHIFT	U(0)
+#define FLAG_SYSCFG_SHIFT	U(1)
+#define FLAG_SRKH_SHIFT		U(2)
+#define FLAG_MC_SHIFT		U(3)
+#define FLAG_DCV0_SHIFT		U(4)
+#define FLAG_DCV1_SHIFT		U(5)
+#define FLAG_DRV0_SHIFT		U(6)
+#define FLAG_DRV1_SHIFT		U(7)
+#define FLAG_OUID0_SHIFT	U(8)
+#define FLAG_OUID1_SHIFT	U(9)
+#define FLAG_OUID2_SHIFT	U(10)
+#define FLAG_OUID3_SHIFT	U(11)
+#define FLAG_OUID4_SHIFT	U(12)
+#define FLAG_DBG_LVL_SHIFT	U(13)
+#define FLAG_OTPMK_SHIFT	U(16)
+#define FLAG_OUID_MASK		U(0x1F)
+#define FLAG_DEBUG_MASK		U(0xF)
+#define FLAG_OTPMK_MASK		U(0xF)
+
+/* OTPMK flag values */
+#define PROG_OTPMK_MIN		U(0x0)
+#define PROG_OTPMK_RANDOM	U(0x1)
+#define PROG_OTPMK_USER		U(0x2)
+#define PROG_OTPMK_RANDOM_MIN	U(0x5)
+#define PROG_OTPMK_USER_MIN	U(0x6)
+#define PROG_NO_OTPMK		U(0x8)
+
+#define OTPMK_MIM_BITS_MASK	U(0xF0000000)
+
+/* System configuration bit shifts */
+#define SCB_WP_SHIFT		U(0)
+#define SCB_ITS_SHIFT		U(2)
+#define SCB_NSEC_SHIFT		U(4)
+#define SCB_ZD_SHIFT		U(5)
+#define SCB_K0_SHIFT		U(15)
+#define SCB_K1_SHIFT		U(14)
+#define SCB_K2_SHIFT		U(13)
+#define SCB_K3_SHIFT		U(12)
+#define SCB_K4_SHIFT		U(11)
+#define SCB_K5_SHIFT		U(10)
+#define SCB_K6_SHIFT		U(9)
+#define SCB_FR0_SHIFT		U(30)
+#define SCB_FR1_SHIFT		U(31)
+
+/* Fuse Header Structure */
+struct fuse_hdr_t {
+	uint8_t barker[4];          /* 0x00 Barker code */
+	uint32_t flags;             /* 0x04 Script flags */
+	uint32_t povdd_gpio;        /* 0x08 GPIO for POVDD */
+	uint32_t otpmk[8];          /* 0x0C-0x2B OTPMK */
+	uint32_t srkh[8];           /* 0x2C-0x4B SRKH */
+	uint32_t oem_uid[5];        /* 0x4C-0x5F OEM unique id's */
+	uint32_t dcv[2];            /* 0x60-0x67 Debug Challenge */
+	uint32_t drv[2];            /* 0x68-0x6F Debug Response */
+	uint32_t ospr1;             /* 0x70 OSPR1 */
+	uint32_t sc;                /* 0x74 OSPR0 (System Configuration) */
+	uint32_t reserved[2];       /* 0x78-0x7F Reserved */
+};
+
+/* Function to do fuse provisioning */
+int provision_fuses(unsigned long long fuse_scr_addr,
+		    bool en_povdd_status);
+
+#define EFUSE_POWERUP_DELAY_mSec	U(25)
+#endif	/* FUSE_PROV_H  */
diff --git a/include/drivers/nxp/sfp/sfp.h b/include/drivers/nxp/sfp/sfp.h
new file mode 100644
index 0000000..2cb4c7d
--- /dev/null
+++ b/include/drivers/nxp/sfp/sfp.h
@@ -0,0 +1,100 @@
+/*
+ * Copyright 2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#ifndef SFP_H
+#define SFP_H
+
+#include <endian.h>
+#include <lib/mmio.h>
+
+/* SFP Configuration Register Offsets */
+#define SFP_INGR_OFFSET		U(0x20)
+#define SFP_SVHESR_OFFSET	U(0x24)
+#define SFP_SFPCR_OFFSET	U(0x28)
+#define SFP_VER_OFFSET		U(0x38)
+
+/* SFP Hamming register masks for OTPMK and DRV */
+#define SFP_SVHESR_DRV_MASK	U(0x7F)
+#define SFP_SVHESR_OTPMK_MASK	U(0x7FC00)
+
+/* SFP commands */
+#define SFP_INGR_READFB_CMD	U(0x1)
+#define SFP_INGR_PROGFB_CMD	U(0x2)
+#define SFP_INGR_ERROR_MASK	U(0x100)
+
+/* SFPCR Masks */
+#define SFP_SFPCR_WD		U(0x80000000)
+#define SFP_SFPCR_WDL		U(0x40000000)
+
+/* SFPCR Masks */
+#define SFP_SFPCR_WD		U(0x80000000)
+#define SFP_SFPCR_WDL		U(0x40000000)
+
+#define SFP_FUSE_REGS_OFFSET	U(0x200)
+
+#ifdef NXP_SFP_VER_3_4
+#define OSPR0_SC_MASK		U(0xC000FE35)
+#elif defined(NXP_SFP_VER_3_2)
+#define OSPR0_SC_MASK		U(0x0000E035)
+#endif
+
+#if defined(NXP_SFP_VER_3_4)
+#define OSPR_KEY_REVOC_SHIFT	U(9)
+#define OSPR_KEY_REVOC_MASK	U(0x0000fe00)
+#elif defined(NXP_SFP_VER_3_2)
+#define OSPR_KEY_REVOC_SHIFT	U(13)
+#define OSPR_KEY_REVOC_MASK	U(0x0000e000)
+#endif /* NXP_SFP_VER_3_4 */
+
+#define OSPR1_MC_MASK		U(0xFFFF0000)
+#define OSPR1_DBG_LVL_MASK	U(0x00000007)
+
+#define OSPR_ITS_MASK		U(0x00000004)
+#define OSPR_WP_MASK		U(0x00000001)
+
+#define MAX_OEM_UID		U(5)
+#define SRK_HASH_SIZE		U(32)
+
+/* SFP CCSR Register Map */
+struct sfp_ccsr_regs_t {
+	uint32_t ospr;			/* 0x200 OSPR0 */
+	uint32_t ospr1;			/* 0x204 OSPR1 */
+	uint32_t dcv[2];		/* 0x208 Debug Challenge Value */
+	uint32_t drv[2];		/* 0x210 Debug Response Value */
+	uint32_t fswpr;			/* 0x218 FSL Section Write Protect */
+	uint32_t fsl_uid[2];		/* 0x21c FSL UID 0 */
+	uint32_t isbcr;			/* 0x224 ISBC Configuration */
+	uint32_t fsspr[3];		/* 0x228 FSL Scratch Pad */
+	uint32_t otpmk[8];		/* 0x234 OTPMK */
+	uint32_t srk_hash[SRK_HASH_SIZE/sizeof(uint32_t)];
+					/* 0x254 Super Root Key Hash */
+	uint32_t oem_uid[MAX_OEM_UID];	/* 0x274 OEM UID 0 */
+};
+
+uintptr_t get_sfp_addr(void);
+void sfp_init(uintptr_t nxp_sfp_addr);
+uint32_t *get_sfp_srk_hash(void);
+int sfp_check_its(void);
+int sfp_check_oem_wp(void);
+uint32_t get_key_revoc(void);
+void set_sfp_wr_disable(void);
+int sfp_program_fuses(void);
+
+uint32_t sfp_read_oem_uid(uint8_t oem_uid);
+uint32_t sfp_write_oem_uid(uint8_t oem_uid, uint32_t sfp_val);
+
+#ifdef NXP_SFP_BE
+#define sfp_read32(a)           bswap32(mmio_read_32((uintptr_t)(a)))
+#define sfp_write32(a, v)       mmio_write_32((uintptr_t)(a), bswap32(v))
+#elif defined(NXP_SFP_LE)
+#define sfp_read32(a)           mmio_read_32((uintptr_t)(a))
+#define sfp_write32(a, v)       mmio_write_32((uintptr_t)(a), (v))
+#else
+#error Please define CCSR SFP register endianness
+#endif
+
+#endif/* SFP_H */
diff --git a/include/drivers/nxp/sfp/sfp_error_codes.h b/include/drivers/nxp/sfp/sfp_error_codes.h
new file mode 100644
index 0000000..7be7a27
--- /dev/null
+++ b/include/drivers/nxp/sfp/sfp_error_codes.h
@@ -0,0 +1,40 @@
+/*
+ * Copyright 2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#ifndef SFP_ERROR_CODES_H
+#define SFP_ERROR_CODES_H
+
+ /* Error codes */
+#define ERROR_FUSE_BARKER		0x1
+#define ERROR_READFB_CMD		0x2
+#define ERROR_PROGFB_CMD		0x3
+#define ERROR_SRKH_ALREADY_BLOWN	0x4
+#define ERROR_SRKH_WRITE		0x5
+#define ERROR_OEMUID_ALREADY_BLOWN	0x6
+#define ERROR_OEMUID_WRITE		0x7
+#define ERROR_DCV_ALREADY_BLOWN		0x8
+#define ERROR_DCV_WRITE			0x9
+#define ERROR_DRV_ALREADY_BLOWN		0xa
+#define ERROR_DRV_HAMMING_ERROR		0xb
+#define ERROR_DRV_WRITE			0x18
+#define ERROR_OTPMK_ALREADY_BLOWN	0xc
+#define ERROR_OTPMK_HAMMING_ERROR	0xd
+#define ERROR_OTPMK_USER_MIN		0xe
+#define ERROR_OSPR1_ALREADY_BLOWN	0xf
+#define ERROR_OSPR1_WRITE		0x10
+#define ERROR_SC_ALREADY_BLOWN		0x11
+#define ERROR_SC_WRITE			0x12
+#define ERROR_POVDD_GPIO_FAIL		0x13
+#define ERROR_GPIO_SET_FAIL		0x14
+#define ERROR_GPIO_RESET_FAIL		0x15
+#define ERROR_OTPMK_SEC_DISABLED	0x16
+#define ERROR_OTPMK_SEC_ERROR		0x17
+#define ERROR_OTPMK_WRITE		0x19
+#define PLAT_ERROR_ENABLE_POVDD		0x20
+#define PLAT_ERROR_DISABLE_POVDD	0x21
+
+#endif /* SFP_ERROR_CODES_H */
diff --git a/include/drivers/nxp/smmu/nxp_smmu.h b/include/drivers/nxp/smmu/nxp_smmu.h
new file mode 100644
index 0000000..bc17703
--- /dev/null
+++ b/include/drivers/nxp/smmu/nxp_smmu.h
@@ -0,0 +1,42 @@
+/*
+ * Copyright 2018-2020 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#ifndef NXP_SMMU_H
+#define NXP_SMMU_H
+
+#define SMMU_SCR0		(0x0)
+#define SMMU_NSCR0		(0x400)
+#define SMMU_SACR		(0x10)
+
+#define SCR0_CLIENTPD_MASK	0x00000001
+#define SCR0_USFCFG_MASK	0x00000400
+
+#define SMMU_SACR_CACHE_LOCK_ENABLE_BIT      (1ULL << 26U)
+
+static inline void bypass_smmu(uintptr_t smmu_base_addr)
+{
+	uint32_t val;
+
+	val = (mmio_read_32(smmu_base_addr + SMMU_SCR0) | SCR0_CLIENTPD_MASK) &
+		~(SCR0_USFCFG_MASK);
+	mmio_write_32((smmu_base_addr + SMMU_SCR0), val);
+
+	val = (mmio_read_32(smmu_base_addr + SMMU_NSCR0) | SCR0_CLIENTPD_MASK) &
+		~(SCR0_USFCFG_MASK);
+	mmio_write_32((smmu_base_addr + SMMU_NSCR0), val);
+}
+
+static inline void smmu_cache_unlock(uintptr_t smmu_base_addr)
+{
+	uint32_t val;
+
+	val = mmio_read_32((smmu_base_addr + SMMU_SACR));
+	val &= (uint32_t)~SMMU_SACR_CACHE_LOCK_ENABLE_BIT;
+	mmio_write_32((smmu_base_addr + SMMU_SACR), val);
+}
+
+#endif
diff --git a/include/drivers/nxp/timer/nxp_timer.h b/include/drivers/nxp/timer/nxp_timer.h
new file mode 100644
index 0000000..280e5b2
--- /dev/null
+++ b/include/drivers/nxp/timer/nxp_timer.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright 2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#
+#ifndef NXP_TIMER_H
+#define NXP_TIMER_H
+
+ /* System Counter Offset and Bit Mask */
+#define SYS_COUNTER_CNTCR_OFFSET	0x0
+#define SYS_COUNTER_CNTCR_EN		0x00000001
+#define CNTCR_EN_MASK			0x1
+
+#ifndef __ASSEMBLER__
+uint64_t get_timer_val(uint64_t start);
+
+#ifdef IMAGE_BL31
+void ls_configure_sys_timer(uintptr_t ls_sys_timctl_base,
+			    uint8_t ls_config_cntacr,
+			    uint8_t plat_ls_ns_timer_frame_id);
+void enable_init_timer(void);
+#endif
+
+/*
+ * Initialise the nxp on-chip free rolling usec counter as the delay
+ * timer.
+ */
+void delay_timer_init(uintptr_t nxp_timer_addr);
+void ls_bl31_timer_init(uintptr_t nxp_timer_addr);
+#endif	/* __ASSEMBLER__ */
+
+#endif /* NXP_TIMER_H */
diff --git a/include/drivers/nxp/trdc/imx_trdc.h b/include/drivers/nxp/trdc/imx_trdc.h
new file mode 100644
index 0000000..0b41fcf
--- /dev/null
+++ b/include/drivers/nxp/trdc/imx_trdc.h
@@ -0,0 +1,172 @@
+/*
+ * Copyright 2022-2023 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef IMX_TRDC_H
+#define IMX_XRDC_H
+
+#define MBC_BLK_ALL	U(255)
+#define MRC_REG_ALL	U(16)
+#define GLBAC_NUM	U(8)
+
+#define DID_NUM		U(16)
+#define MBC_MAX_NUM	U(4)
+#define MRC_MAX_NUM	U(2)
+#define MBC_NUM(HWCFG)	(((HWCFG) >> 16) & 0xF)
+#define MRC_NUM(HWCFG)	(((HWCFG) >> 24) & 0x1F)
+
+#define MBC_BLK_NUM(GLBCFG)	((GLBCFG) & 0x3FF)
+#define MRC_RGN_NUM(GLBCFG)	((GLBCFG) & 0x1F)
+
+#define MDAC_W_X(m, r)	(0x800 + (m) * 0x20 + (r) * 0x4)
+
+/* CPU/non-CPU domain common bits */
+#define MDA_VLD		BIT(31)
+#define MDA_LK1		BIT(30)
+#define MDA_DFMT	BIT(29)
+
+/* CPU domain bits */
+#define MDA_DFMT0_DID(x)	((x) & 0xF)
+#define MDA_DFMT0_DIDS(x)	(((x) & 0x3) << 4)
+#define MDA_DFMT0_PE(x)		(((x) & 0x3) << 6)
+#define MDA_DFMT0_PIDM(x)	(((x) & 0x3F) << 8)
+#define MDA_DFMT0_SA(x)		(((x) & 0x3) << 14)
+#define MDA_DFMT0_PID(x)	(((x) & 0x3F) << 16)
+
+/* non-CPU domain bits */
+#define MDA_DFMT1_DID(x)	((x) & 0xF)
+#define MDA_DFMT1_PA(x)		(((x) & 0x3) << 4)
+#define MDA_DFMT1_SA(x)		(((x) & 0x3) << 6)
+#define MDA_DFMT1_DIDB(x)	((x) << 8)
+
+#define SP(X)	((X) << 12)
+#define SU(X)	((X) << 8)
+#define NP(X)	((X) << 4)
+#define NU(X)	((X) << 0)
+
+#define RWX	U(7)
+#define RW	U(6)
+#define RX	U(5)
+#define R	U(4)
+#define X	U(1)
+
+struct mbc_mem_dom {
+	uint32_t mem_glbcfg[4];
+	uint32_t nse_blk_index;
+	uint32_t nse_blk_set;
+	uint32_t nse_blk_clr;
+	uint32_t nsr_blk_clr_all;
+	uint32_t memn_glbac[8];
+	/* The upper only existed in the beginning of each MBC */
+	uint32_t mem0_blk_cfg_w[64];
+	uint32_t mem0_blk_nse_w[16];
+	uint32_t mem1_blk_cfg_w[8];
+	uint32_t mem1_blk_nse_w[2];
+	uint32_t mem2_blk_cfg_w[8];
+	uint32_t mem2_blk_nse_w[2];
+	uint32_t mem3_blk_cfg_w[8];
+	uint32_t mem3_blk_nse_w[2]; /*0x1F0, 0x1F4 */
+	uint32_t reserved[2];
+};
+
+struct mrc_rgn_dom {
+	uint32_t mrc_glbcfg[4];
+	uint32_t nse_rgn_indirect;
+	uint32_t nse_rgn_set;
+	uint32_t nse_rgn_clr;
+	uint32_t nse_rgn_clr_all;
+	uint32_t memn_glbac[8];
+	/* The upper only existed in the beginning of each MRC */
+	uint32_t rgn_desc_words[16][2]; /* 16 regions at max, 2 words per region */
+	uint32_t rgn_nse;
+	uint32_t reserved2[15];
+};
+
+struct mda_inst {
+	uint32_t mda_w[8];
+};
+
+struct trdc_mgr {
+	uint32_t trdc_cr;
+	uint32_t res0[59];
+	uint32_t trdc_hwcfg0;
+	uint32_t trdc_hwcfg1;
+	uint32_t res1[450];
+	struct mda_inst mda[128];
+};
+
+struct trdc_mbc {
+	struct mbc_mem_dom mem_dom[DID_NUM];
+};
+
+struct trdc_mrc {
+	struct mrc_rgn_dom mrc_dom[DID_NUM];
+};
+
+/***************************************************************
+ * Below structs used fro provding the TRDC configuration info
+ * that will be used to init the TRDC based on use case.
+ ***************************************************************/
+struct trdc_glbac_config {
+	uint8_t mbc_mrc_id;
+	uint8_t glbac_id;
+	uint32_t glbac_val;
+};
+
+struct trdc_mbc_config {
+	uint8_t mbc_id;
+	uint8_t dom_id;
+	uint8_t mem_id;
+	uint8_t blk_id;
+	uint8_t glbac_id;
+	bool secure;
+};
+
+struct trdc_mrc_config {
+	uint8_t mrc_id;
+	uint8_t dom_id;
+	uint8_t region_id;
+	uint32_t region_start;
+	uint32_t region_size;
+	uint8_t glbac_id;
+	bool secure;
+};
+
+struct trdc_mgr_info {
+	uintptr_t trdc_base;
+	uint8_t mbc_id;
+	uint8_t mbc_mem_id;
+	uint8_t blk_mgr;
+	uint8_t blk_mc;
+};
+
+struct trdc_config_info {
+	uintptr_t trdc_base;
+	struct trdc_glbac_config *mbc_glbac;
+	uint32_t num_mbc_glbac;
+	struct trdc_mbc_config *mbc_cfg;
+	uint32_t num_mbc_cfg;
+	struct trdc_glbac_config *mrc_glbac;
+	uint32_t num_mrc_glbac;
+	struct trdc_mrc_config *mrc_cfg;
+	uint32_t num_mrc_cfg;
+};
+
+extern struct trdc_mgr_info trdc_mgr_blks[];
+extern unsigned int trdc_mgr_num;
+/* APIs to apply and enable TRDC */
+int trdc_mda_set_cpu(uintptr_t trdc_base, uint32_t mda_inst,
+		     uint32_t mda_reg, uint8_t sa, uint8_t dids,
+		     uint8_t did, uint8_t pe, uint8_t pidm, uint8_t pid);
+
+int trdc_mda_set_noncpu(uintptr_t trdc_base, uint32_t mda_inst,
+			bool did_bypass, uint8_t sa, uint8_t pa,
+			uint8_t did);
+
+void trdc_mgr_mbc_setup(struct trdc_mgr_info *mgr);
+void trdc_setup(struct trdc_config_info *cfg);
+void trdc_config(void);
+
+#endif /* IMX_TRDC_H */
diff --git a/include/drivers/nxp/tzc/plat_tzc380.h b/include/drivers/nxp/tzc/plat_tzc380.h
new file mode 100644
index 0000000..08d2148
--- /dev/null
+++ b/include/drivers/nxp/tzc/plat_tzc380.h
@@ -0,0 +1,47 @@
+/*
+ * Copyright 2018-2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#if !defined(PLAT_TZC380_H) && defined(IMAGE_BL2)
+#define PLAT_TZC380_H
+
+#include <tzc380.h>
+
+/* Number of DRAM regions to be configured
+ * for the platform can be over-written.
+ *
+ * Array tzc400_reg_list too, needs be over-written
+ * if there is any changes to default DRAM region
+ * configuration.
+ */
+#ifndef MAX_NUM_TZC_REGION
+/* 3 regions:
+ *  Region 0(default),
+ *  Region 1 (DRAM0, Secure Memory),
+ *  Region 2 (DRAM0, Shared memory)
+ */
+#define MAX_NUM_TZC_REGION	3
+#define DEFAULT_TZASC_CONFIG	1
+#endif
+
+struct tzc380_reg {
+	unsigned int secure;
+	unsigned int enabled;
+	uint64_t addr;
+	uint64_t size;
+	unsigned int sub_mask;
+};
+
+void mem_access_setup(uintptr_t base, uint32_t total_regions,
+			struct tzc380_reg *tzc380_reg_list);
+
+int populate_tzc380_reg_list(struct tzc380_reg *tzc380_reg_list,
+			     int dram_idx, int list_idx,
+			     uint64_t dram_start_addr,
+			     uint64_t dram_size,
+			     uint32_t secure_dram_sz,
+			     uint32_t shrd_dram_sz);
+
+#endif /* PLAT_TZC380_H */
diff --git a/include/drivers/nxp/tzc/plat_tzc400.h b/include/drivers/nxp/tzc/plat_tzc400.h
new file mode 100644
index 0000000..1b8e3a4
--- /dev/null
+++ b/include/drivers/nxp/tzc/plat_tzc400.h
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#if !defined(PLAT_TZC400_H) && defined(IMAGE_BL2)
+#define PLAT_TZC400_H
+
+#include <tzc400.h>
+
+/* Structure to configure TZC Regions' boundaries and attributes. */
+struct tzc400_reg {
+	uint8_t reg_filter_en;
+	unsigned long long start_addr;
+	unsigned long long end_addr;
+	unsigned int sec_attr;
+	unsigned int nsaid_permissions;
+};
+
+#define TZC_REGION_NS_NONE	0x00000000U
+
+/* NXP Platforms do not support NS Access ID (NSAID) based non-secure access.
+ * Supports only non secure through generic NS ACCESS ID
+ */
+#define TZC_NS_ACCESS_ID	0xFFFFFFFFU
+
+/* Number of DRAM regions to be configured
+ * for the platform can be over-written.
+ *
+ * Array tzc400_reg_list too, needs be over-written
+ * if there is any changes to default DRAM region
+ * configuration.
+ */
+#ifndef MAX_NUM_TZC_REGION
+/* 3 regions:
+ *  Region 0(default),
+ *  Region 1 (DRAM0, Secure Memory),
+ *  Region 2 (DRAM0, Shared memory)
+ */
+#define MAX_NUM_TZC_REGION	NUM_DRAM_REGIONS + 3
+#define DEFAULT_TZASC_CONFIG	1
+#endif
+
+void mem_access_setup(uintptr_t base, uint32_t total_regions,
+		      struct tzc400_reg *tzc400_reg_list);
+int populate_tzc400_reg_list(struct tzc400_reg *tzc400_reg_list,
+			     int dram_idx, int list_idx,
+			     uint64_t dram_start_addr,
+			     uint64_t dram_size,
+			     uint32_t secure_dram_sz,
+			     uint32_t shrd_dram_sz);
+
+#endif /* PLAT_TZC400_H */