diff options
Diffstat (limited to '')
| -rwxr-xr-x | debian/rules | 94 |
1 files changed, 94 insertions, 0 deletions
diff --git a/debian/rules b/debian/rules new file mode 100755 index 0000000..7101781 --- /dev/null +++ b/debian/rules @@ -0,0 +1,94 @@ +#!/usr/bin/make -f + +include /usr/share/dpkg/architecture.mk +include /usr/share/dpkg/buildtools.mk + +export DH_VERBOSE=1 +export TF_CFLAGS += -ffile-prefix-map=$(CURDIR)=. +export DEB_BUILD_MAINT_OPTIONS=hardening=+all + +# Enable verbose build by default, disable when terse is specified. +ifneq (,$(filter terse,$(DEB_BUILD_OPTIONS))) +VERBOSE=0 +else +VERBOSE=1 +endif + +platforms := g12a gxbb sun50i_a64 sun50i_h6 rcar rk3328 rk3399 rpi3 rpi4 imx8mn imx8mm +# Disable building of imx8mq, as it is not well supported upstream. +#platforms_nodebug := imx8mq + +# By default, iMX8MN uses UART2 console. However, other boards supported +# upstream (e.g. Variscite VAR-SOM-MX8M-NANO board) uses UART4. +# Add two subplatforms for imx8mn platform: +# * imx8mn: default configuration +# * imx8mn_uart4: console set to UART4 +imx8mn_subplatforms := imx8mn imx8mn_uart4 +imx8mn_uart4_assigns := IMX_BOOT_UART_BASE=0x30a60000 + +# By default, iMX8MM uses UART2 console. However, other boards +# use other UARTs +imx8mm_subplatforms := imx8mm imx8mm_uart1 imx8mm_uart3 imx8mm_uart4 +imx8mm_uart1_assigns := IMX_BOOT_UART_BASE=0x30860000 +imx8mm_uart3_assigns := IMX_BOOT_UART_BASE=0x30880000 +imx8mm_uart4_assigns := IMX_BOOT_UART_BASE=0x30A60000 + +# TF-A's regulator setup breaks Ethernet on some H6 boards, +# so make it optional by having two subplatforms: +# * sun50i_h6: default configuration +# * sun50i_h6_no_pmic: skip regulator setup +sun50i_h6_subplatforms := sun50i_h6 sun50i_h6_no_pmic +sun50i_h6_no_pmic_assigns := SUNXI_SETUP_REGULATORS=0 + +rk3328_targets := bl31/bl31.elf +rk3399_targets := bl31/bl31.elf + +rcar_subplatforms := rcar_uclb_h3 rcar_uclb_m3w rcar_uclb_m3n +rcar_uclb_h3_assigns := LSI=H3 RCAR_DRAM_SPLIT=1 RCAR_GEN3_ULCB=1 PMIC_LEVEL_MODE=0 RCAR_DRAM_LPDDR4_MEMCONF=0 SPD=opteed RCAR_LOSSY_ENABLE=1 +rcar_uclb_m3n_assigns := LSI=M3N RCAR_GEN3_ULCB=1 PMIC_LEVEL_MODE=0 RCAR_DRAM_LPDDR4_MEMCONF=0 SPD=opteed RCAR_LOSSY_ENABLE=1 +rcar_uclb_m3w_assigns := LSI=M3 RCAR_DRAM_SPLIT=2 RCAR_GEN3_ULCB=1 PMIC_LEVEL_MODE=0 RCAR_DRAM_LPDDR4_MEMCONF=0 SPD=opteed RCAR_LOSSY_ENABLE=1 + +rcar_targets := bl31.srec bl2.srec +rcar_make_target := rcar + +# Always set CROSS_COMPILE, which also works for native builds. +define build_platform + $(eval platform := $(1)) + $(eval debug := $(2)) + $(eval buildtype := $(3)) + $(eval subplatforms := $(if $($(platform)_subplatforms), $($(platform)_subplatforms), $(platform))) + $(eval targets := $(if $($(platform)_targets), $($(platform)_targets), bl31.bin)) + $(eval make_target := $(if $($(platform)_make_target), $($(platform)_make_target), bl31)) + $(foreach subplatform, $(subplatforms), \ + CROSS_COMPILE=aarch64-linux-gnu- CFLAGS=--param=min-pagesize=0 LDFLAGS= TF_LDFLAGS=--no-warn-rwx-segments dh_auto_build -- V=$(VERBOSE) DEBUG=$(debug) $($(subplatform)_assigns) PLAT=$(platform) $(make_target) ; \ + $(foreach target, $(targets), \ + install -m644 build/$(platform)/$(board)/$(buildtype)/$(target) -Dt build/renamed/$(subplatform) ; \ + ) \ + # For each subplatform, make is called using the same PLAT variable. If + # the build is not cleaned between each call, objects will remain the + # same, without rebuilding them. + make DEBUG=$(debug) $($(subplatform)_assigns) PLAT=$(platform) clean ; \ + ) +endef + +%: + dh $@ + +override_dh_auto_build: +# Disable building of arm-trusted-firmware-tools +ifeq ($(filter pkg.arm-trusted-firmware.notools,$(DEB_BUILD_PROFILES)),) + dh_auto_build --sourcedir=tools/fiptool -- DEBUG=1 V=$(VERBOSE) HOSTCC=$(CC) HOSTCCFLAGS="$(CFLAGS) $(CPPFLAGS)" + dh_auto_build --sourcedir=tools/cert_create -- DEBUG=1 V=$(VERBOSE) HOSTCC=$(CC) HOSTCCFLAGS="$(CFLAGS) $(CPPFLAGS) -std=c99 -DUSE_TBBR_DEFS=1" +endif +# Only build firmware on arm64. +ifeq ($(DEB_HOST_ARCH),arm64) + override_dh_auto_build: $(platforms) $(platforms_nodebug) + $(platforms): + $(call build_platform,$@,1,debug) + $(platforms_nodebug): + $(call build_platform,$@,0,release) +endif + +override_dh_installchangelogs: + dh_installchangelogs -parm-trusted-firmware docs/change-log.md + dh_installchangelogs -parm-trusted-firmware-tools |