diff options
Diffstat (limited to 'docs/plat/hikey960.rst')
| -rw-r--r-- | docs/plat/hikey960.rst | 180 |
1 files changed, 180 insertions, 0 deletions
diff --git a/docs/plat/hikey960.rst b/docs/plat/hikey960.rst new file mode 100644 index 0000000..982c2c8 --- /dev/null +++ b/docs/plat/hikey960.rst @@ -0,0 +1,180 @@ +HiKey960 +======== + +HiKey960 is one of 96boards. Hisilicon Hi3660 processor is installed on HiKey960. + +More information are listed in `link`_. + +How to build +------------ + +Code Locations +~~~~~~~~~~~~~~ + +- Trusted Firmware-A: + `link <https://github.com/ARM-software/arm-trusted-firmware>`__ + +- OP-TEE: + `link <https://github.com/OP-TEE/optee_os>`__ + +- edk2: + `link <https://github.com/96boards-hikey/edk2/tree/testing/hikey960_v2.5>`__ + +- OpenPlatformPkg: + `link <https://github.com/96boards-hikey/OpenPlatformPkg/tree/testing/hikey960_v1.3.4>`__ + +- l-loader: + `link <https://github.com/96boards-hikey/l-loader/tree/testing/hikey960_v1.2>`__ + +Build Procedure +~~~~~~~~~~~~~~~ + +- Fetch all the above 5 repositories into local host. + Make all the repositories in the same ${BUILD\_PATH}. + + .. code:: shell + + git clone https://github.com/ARM-software/arm-trusted-firmware -b integration + git clone https://github.com/OP-TEE/optee_os + git clone https://github.com/96boards-hikey/edk2 -b testing/hikey960_v2.5 + git clone https://github.com/96boards-hikey/OpenPlatformPkg -b testing/hikey960_v1.3.4 + git clone https://github.com/96boards-hikey/l-loader -b testing/hikey960_v1.2 + +- Create the symbol link to OpenPlatformPkg in edk2. + + .. code:: shell + + $cd ${BUILD_PATH}/edk2 + $ln -sf ../OpenPlatformPkg + +- Prepare AARCH64 toolchain. + +- If your hikey960 hardware is v1, update *OpenPlatformPkg/Platforms/Hisilicon/HiKey960/HiKey960.dsc* first. *(optional)* + + .. code:: shell + + DEFINE SERIAL_BASE=0xFDF05000 + + If your hikey960 hardware is v2 or newer, nothing to do. + +- Build it as debug mode. Create script file for build. + + .. code:: shell + + cd {BUILD_PATH}/arm-trusted-firmware + sh ../l-loader/build_uefi.sh hikey960 + +- Generate l-loader.bin and partition table. + *Make sure that you're using the sgdisk in the l-loader directory.* + + .. code:: shell + + cd ${BUILD_PATH}/l-loader + ln -sf ${EDK2_OUTPUT_DIR}/FV/bl1.bin + ln -sf ${EDK2_OUTPUT_DIR}/FV/bl2.bin + ln -sf ${EDK2_OUTPUT_DIR}/FV/fip.bin + ln -sf ${EDK2_OUTPUT_DIR}/FV/BL33_AP_UEFI.fd + make hikey960 + +Setup Console +------------- + +- Install ser2net. Use telnet as the console since UEFI will output window + that fails to display in minicom. + + .. code:: shell + + $sudo apt-get install ser2net + +- Configure ser2net. + + .. code:: shell + + $sudo vi /etc/ser2net.conf + + Append one line for serial-over-USB in *#ser2net.conf* + + :: + + 2004:telnet:0:/dev/ttyUSB0:115200 8DATABITS NONE 1STOPBIT banner + +- Start ser2net + + .. code:: shell + + $sudo killall ser2net + $sudo ser2net -u + +- Open the console. + + .. code:: shell + + $telnet localhost 2004 + + And you could open the console remotely, too. + +Boot UEFI in recovery mode +-------------------------- + +- Fetch that are used in recovery mode. The code location is in below. + `link <https://github.com/96boards-hikey/tools-images-hikey960>`__ + +- Prepare recovery binary. + + .. code:: shell + + $cd tools-images-hikey960 + $ln -sf ${BUILD_PATH}/l-loader/l-loader.bin + $ln -sf ${BUILD_PATH}/l-loader/fip.bin + $ln -sf ${BUILD_PATH}/l-loader/recovery.bin + +- Prepare config file. + + .. code:: shell + + $vi config + # The content of config file + ./sec_usb_xloader.img 0x00020000 + ./sec_uce_boot.img 0x6A908000 + ./recovery.bin 0x1AC00000 + +- Remove the modemmanager package. This package may causes hikey\_idt tool failure. + + .. code:: shell + + $sudo apt-get purge modemmanager + +- Run the command to download recovery.bin into HiKey960. + + .. code:: shell + + $sudo ./hikey_idt -c config -p /dev/ttyUSB1 + +- UEFI running in recovery mode. + When prompt '.' is displayed on console, press hotkey 'f' in keyboard. Then Android fastboot app is running. + The timeout of prompt '.' is 10 seconds. + +- Update images. + + .. code:: shell + + $sudo fastboot flash ptable prm_ptable.img + $sudo fastboot flash xloader sec_xloader.img + $sudo fastboot flash fastboot l-loader.bin + $sudo fastboot flash fip fip.bin + $sudo fastboot flash boot boot.img + $sudo fastboot flash cache cache.img + $sudo fastboot flash system system.img + $sudo fastboot flash userdata userdata.img + +- Notice: UEFI could also boot kernel in recovery mode, but BL31 isn't loaded in + recovery mode. + +Boot UEFI in normal mode +------------------------ + +- Make sure "Boot Mode" switch is OFF for normal boot mode. Then power on HiKey960. + +- Reference `link <https://github.com/96boards-hikey/tools-images-hikey960/blob/master/build-from-source/README-ATF-UEFI-build-from-source.md>`__ + +.. _link: https://www.96boards.org/documentation/consumer/hikey/hikey960 |