diff options
Diffstat (limited to '')
| -rw-r--r-- | docs/plat/synquacer.rst | 117 |
1 files changed, 117 insertions, 0 deletions
diff --git a/docs/plat/synquacer.rst b/docs/plat/synquacer.rst new file mode 100644 index 0000000..dd29d29 --- /dev/null +++ b/docs/plat/synquacer.rst @@ -0,0 +1,117 @@ +Socionext Synquacer +=================== + +Socionext's Synquacer SC2A11 is a multi-core processor with 24 cores of Arm +Cortex-A53. The Developerbox, of 96boards, is a platform that contains this +processor. This port of the Trusted Firmware only supports this platform at +the moment. + +More information are listed in `link`_. + +How to build +------------ + +Code Locations +~~~~~~~~~~~~~~ + +- Trusted Firmware-A: + `link <https://github.com/ARM-software/arm-trusted-firmware>`__ + +- edk2: + `link <https://github.com/tianocore/edk2>`__ + +- edk2-platforms: + `link <https://github.com/tianocore/edk2-platforms>`__ + +- edk2-non-osi: + `link <https://github.com/tianocore/edk2-non-osi>`__ + +Boot Flow +~~~~~~~~~ + +SCP firmware --> TF-A BL31 --> UEFI(edk2) + +Build Procedure +~~~~~~~~~~~~~~~ + +- Firstly, in addition to the “normal” build tools you will also need a + few specialist tools. On a Debian or Ubuntu operating system try: + + .. code:: shell + + sudo apt install acpica-tools device-tree-compiler uuid-dev + +- Secondly, create a new working directory and store the absolute path to this + directory in an environment variable, WORKSPACE. It does not matter where + this directory is created but as an example: + + .. code:: shell + + export WORKSPACE=$HOME/build/developerbox-firmware + mkdir -p $WORKSPACE + +- Run the following commands to clone the source code: + + .. code:: shell + + cd $WORKSPACE + git clone https://github.com/ARM-software/arm-trusted-firmware -b master + git clone https://github.com/tianocore/edk2.git -b master + git clone https://github.com/tianocore/edk2-platforms.git -b master + git clone https://github.com/tianocore/edk2-non-osi.git -b master + +- Build ATF: + + .. code:: shell + + cd $WORKSPACE/arm-trusted-firmware + make -j`nproc` PLAT=synquacer PRELOADED_BL33_BASE=0x8200000 bl31 fiptool + tools/fiptool/fiptool create \ + --tb-fw ./build/synquacer/release/bl31.bin \ + --soc-fw ./build/synquacer/release/bl31.bin \ + --scp-fw ./build/synquacer/release/bl31.bin \ + ../edk2-non-osi/Platform/Socionext/DeveloperBox/fip_all_arm_tf.bin + +- Build EDK2: + + .. code:: shell + + cd $WORKSPACE + export PACKAGES_PATH=$WORKSPACE/edk2:$WORKSPACE/edk2-platforms:$WORKSPACE/edk2-non-osi + export ACTIVE_PLATFORM="Platform/Socionext/DeveloperBox/DeveloperBox.dsc" + export GCC5_AARCH64_PREFIX=aarch64-linux-gnu- + unset ARCH + + . edk2/edksetup.sh + make -C edk2/BaseTools + + build -p $ACTIVE_PLATFORM -b RELEASE -a AARCH64 -t GCC5 -n `nproc` -D DO_X86EMU=TRUE + +- The firmware image, which comprises the option ROM, ARM trusted firmware and + EDK2 itself, can be found $WORKSPACE/../Build/DeveloperBox/RELEASE_GCC5/FV/. + Use SYNQUACERFIRMWAREUPDATECAPSULEFMPPKCS7.Cap for UEFI capsule update and + SPI_NOR_IMAGE.fd for the serial flasher. + + Note #1: -t GCC5 can be loosely translated as “enable link-time-optimization”; + any version of gcc >= 5 will support this feature and may be used to build EDK2. + + Note #2: Replace -b RELEASE with -b DEBUG to build a debug. + +Install the System Firmware +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +- Providing your Developerbox is fully working and has on operating system + installed then you can adopt your the newly compiled system firmware using + the capsule update method:. + + .. code:: shell + + sudo apt install fwupdate + sudo fwupdate --apply {50b94ce5-8b63-4849-8af4-ea479356f0e3} \ + SYNQUACERFIRMWAREUPDATECAPSULEFMPPKCS7.Cap + sudo reboot + +- Alternatively you can install SPI_NOR_IMAGE.fd using the `board recovery method`_. + +.. _link: https://www.96boards.org/product/developerbox/ +.. _board recovery method: https://www.96boards.org/documentation/enterprise/developerbox/installation/board-recovery.md.html |