diff options
Diffstat (limited to 'drivers/arm/ccn')
| -rw-r--r-- | drivers/arm/ccn/ccn.c | 621 | ||||
| -rw-r--r-- | drivers/arm/ccn/ccn_private.h | 233 |
2 files changed, 854 insertions, 0 deletions
diff --git a/drivers/arm/ccn/ccn.c b/drivers/arm/ccn/ccn.c new file mode 100644 index 0000000..5b13250 --- /dev/null +++ b/drivers/arm/ccn/ccn.c @@ -0,0 +1,621 @@ +/* + * Copyright (c) 2015-2020, ARM Limited and Contributors. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include <assert.h> +#include <stdbool.h> + +#include <arch.h> +#include <common/debug.h> +#include <drivers/arm/ccn.h> +#include <lib/bakery_lock.h> +#include <lib/mmio.h> + +#include "ccn_private.h" + +static const ccn_desc_t *ccn_plat_desc; +#if defined(IMAGE_BL31) || (!defined(__aarch64__) && defined(IMAGE_BL32)) +DEFINE_BAKERY_LOCK(ccn_lock); +#endif + +/******************************************************************************* + * This function takes the base address of the CCN's programmer's view (PV), a + * region ID of one of the 256 regions (0-255) and a register offset within the + * region. It converts the first two parameters into a base address and uses it + * to read the register at the offset. + ******************************************************************************/ +static inline unsigned long long ccn_reg_read(uintptr_t periphbase, + unsigned int region_id, + unsigned int register_offset) +{ + uintptr_t region_base; + + assert(periphbase); + assert(region_id < REGION_ID_LIMIT); + + region_base = periphbase + region_id_to_base(region_id); + return mmio_read_64(region_base + register_offset); +} + +/******************************************************************************* + * This function takes the base address of the CCN's programmer's view (PV), a + * region ID of one of the 256 regions (0-255), a register offset within the + * region and a value. It converts the first two parameters into a base address + * and uses it to write the value in the register at the offset. + ******************************************************************************/ +static inline void ccn_reg_write(uintptr_t periphbase, + unsigned int region_id, + unsigned int register_offset, + unsigned long long value) +{ + uintptr_t region_base; + + assert(periphbase); + assert(region_id < REGION_ID_LIMIT); + + region_base = periphbase + region_id_to_base(region_id); + mmio_write_64(region_base + register_offset, value); +} + +#if ENABLE_ASSERTIONS + +typedef struct rn_info { + unsigned char node_desc[MAX_RN_NODES]; + } rn_info_t; + +/******************************************************************************* + * This function takes the base address of the CCN's programmer's view (PV) and + * the node ID of a Request Node (RN-D or RN-I). It returns the maximum number + * of master interfaces resident on that node. This number is equal to the least + * significant two bits of the node type ID + 1. + ******************************************************************************/ +static unsigned int ccn_get_rni_mcount(uintptr_t periphbase, + unsigned int rn_id) +{ + unsigned int rn_type_id; + + /* Use the node id to find the type of RN-I/D node */ + rn_type_id = get_node_type(ccn_reg_read(periphbase, + rn_id + RNI_REGION_ID_START, + REGION_ID_OFFSET)); + + /* Return the number master interfaces based on node type */ + return rn_type_id_to_master_cnt(rn_type_id); +} + +/******************************************************************************* + * This function reads the CCN registers to find the following information about + * the ACE/ACELite/ACELite+DVM/CHI interfaces resident on the various types of + * Request Nodes (RN-Fs, RN-Is and RN-Ds) in the system: + * + * 1. The total number of such interfaces that this CCN IP supports. This is the + * cumulative number of interfaces across all Request node types. It is + * passed back as the return value of this function. + * + * 2. The maximum number of interfaces of a type resident on a Request node of + * one of the three types. This information is populated in the 'info' + * array provided by the caller as described next. + * + * The array has 64 entries. Each entry corresponds to a Request node. The + * Miscellaneous node's programmer's view has RN-F, RN-I and RN-D ID + * registers. For each RN-I and RN-D ID indicated as being present in these + * registers, its identification register (offset 0xFF00) is read. This + * register specifies the maximum number of master interfaces the node + * supports. For RN-Fs it is assumed that there can be only a single fully + * coherent master resident on each node. The counts for each type of node + * are use to populate the array entry at the index corresponding to the node + * ID i.e. rn_info[node ID] = <number of master interfaces> + ******************************************************************************/ +static unsigned int ccn_get_rn_master_info(uintptr_t periphbase, + rn_info_t *info) +{ + unsigned int num_masters = 0; + rn_types_t rn_type; + + assert (info); + + for (rn_type = RN_TYPE_RNF; rn_type < NUM_RN_TYPES; rn_type++) { + unsigned int mn_reg_off, node_id; + unsigned long long rn_bitmap; + + /* + * RN-F, RN-I, RN-D node registers in the MN region occupy + * contiguous 16 byte apart offsets. + */ + mn_reg_off = MN_RNF_NODEID_OFFSET + (rn_type << 4); + rn_bitmap = ccn_reg_read(periphbase, MN_REGION_ID, mn_reg_off); + + FOR_EACH_PRESENT_NODE_ID(node_id, rn_bitmap) { + unsigned int node_mcount; + + /* + * A RN-F does not have a node type since it does not + * export a programmer's interface. It can only have a + * single fully coherent master residing on it. If the + * offset of the MN(Miscellaneous Node) register points + * to a RN-I/D node then the master count is set to the + * maximum number of master interfaces that can possibly + * reside on the node. + */ + node_mcount = (mn_reg_off == MN_RNF_NODEID_OFFSET ? 1 : + ccn_get_rni_mcount(periphbase, node_id)); + + /* + * Use this value to increment the maximum possible + * master interfaces in the system. + */ + num_masters += node_mcount; + + /* + * Update the entry in 'info' for this node ID with + * the maximum number of masters than can sit on + * it. This information will be used to validate the + * node information passed by the platform later. + */ + info->node_desc[node_id] = node_mcount; + } + } + + return num_masters; +} + +/******************************************************************************* + * This function validates parameters passed by the platform (in a debug build). + * It collects information about the maximum number of master interfaces that: + * a) the CCN IP can accommodate and + * b) can exist on each Request node. + * It compares this with the information provided by the platform to determine + * the validity of the latter. + ******************************************************************************/ +static void __init ccn_validate_plat_params(const ccn_desc_t *plat_desc) +{ + unsigned int master_id, num_rn_masters; + rn_info_t info = { {0} }; + + assert(plat_desc); + assert(plat_desc->periphbase); + assert(plat_desc->master_to_rn_id_map); + assert(plat_desc->num_masters); + assert(plat_desc->num_masters < CCN_MAX_RN_MASTERS); + + /* + * Find the number and properties of fully coherent, IO coherent and IO + * coherent + DVM master interfaces + */ + num_rn_masters = ccn_get_rn_master_info(plat_desc->periphbase, &info); + assert(plat_desc->num_masters < num_rn_masters); + + /* + * Iterate through the Request nodes specified by the platform. + * Decrement the count of the masters in the 'info' array for each + * Request node encountered. If the count would drop below 0 then the + * platform's view of this aspect of CCN configuration is incorrect. + */ + for (master_id = 0; master_id < plat_desc->num_masters; master_id++) { + unsigned int node_id; + + node_id = plat_desc->master_to_rn_id_map[master_id]; + assert(node_id < MAX_RN_NODES); + assert(info.node_desc[node_id]); + info.node_desc[node_id]--; + } +} +#endif /* ENABLE_ASSERTIONS */ + +/******************************************************************************* + * This function validates parameters passed by the platform (in a debug build) + * and initialises its internal data structures. A lock is required to prevent + * simultaneous CCN operations at runtime (only BL31) to add and remove Request + * nodes from coherency. + ******************************************************************************/ +void __init ccn_init(const ccn_desc_t *plat_desc) +{ +#if ENABLE_ASSERTIONS + ccn_validate_plat_params(plat_desc); +#endif + + ccn_plat_desc = plat_desc; +} + +/******************************************************************************* + * This function converts a bit map of master interface IDs to a bit map of the + * Request node IDs that they reside on. + ******************************************************************************/ +static unsigned long long ccn_master_to_rn_id_map(unsigned long long master_map) +{ + unsigned long long rn_id_map = 0; + unsigned int node_id, iface_id; + + assert(master_map); + assert(ccn_plat_desc); + + FOR_EACH_PRESENT_MASTER_INTERFACE(iface_id, master_map) { + assert(iface_id < ccn_plat_desc->num_masters); + + /* Convert the master ID into the node ID */ + node_id = ccn_plat_desc->master_to_rn_id_map[iface_id]; + + /* Set the bit corresponding to this node ID */ + rn_id_map |= (1ULL << node_id); + } + + return rn_id_map; +} + +/******************************************************************************* + * This function executes the necessary operations to add or remove Request node + * IDs specified in the 'rn_id_map' bitmap from the snoop/DVM domains specified + * in the 'hn_id_map'. The 'region_id' specifies the ID of the first HN-F/MN + * on which the operation should be performed. 'op_reg_offset' specifies the + * type of operation (add/remove). 'stat_reg_offset' specifies the register + * which should be polled to determine if the operation has completed or not. + ******************************************************************************/ +static void ccn_snoop_dvm_do_op(unsigned long long rn_id_map, + unsigned long long hn_id_map, + unsigned int region_id, + unsigned int op_reg_offset, + unsigned int stat_reg_offset) +{ + unsigned int start_region_id; + + assert(ccn_plat_desc); + assert(ccn_plat_desc->periphbase); + +#if defined(IMAGE_BL31) || (!defined(__aarch64__) && defined(IMAGE_BL32)) + bakery_lock_get(&ccn_lock); +#endif + start_region_id = region_id; + FOR_EACH_PRESENT_REGION_ID(start_region_id, hn_id_map) { + ccn_reg_write(ccn_plat_desc->periphbase, + start_region_id, + op_reg_offset, + rn_id_map); + } + + start_region_id = region_id; + + FOR_EACH_PRESENT_REGION_ID(start_region_id, hn_id_map) { + WAIT_FOR_DOMAIN_CTRL_OP_COMPLETION(start_region_id, + stat_reg_offset, + op_reg_offset, + rn_id_map); + } + +#if defined(IMAGE_BL31) || (!defined(__aarch64__) && defined(IMAGE_BL32)) + bakery_lock_release(&ccn_lock); +#endif +} + +/******************************************************************************* + * The following functions provide the boot and runtime API to the platform for + * adding and removing master interfaces from the snoop/DVM domains. A bitmap of + * master interfaces IDs is passed as a parameter. It is converted into a bitmap + * of Request node IDs using the mapping provided by the platform while + * initialising the driver. + * For example, consider a dual cluster system where the clusters have values 0 + * & 1 in the affinity level 1 field of their respective MPIDRs. While + * initialising this driver, the platform provides the mapping between each + * cluster and the corresponding Request node. To add or remove a cluster from + * the snoop and dvm domain, the bit position corresponding to the cluster ID + * should be set in the 'master_iface_map' i.e. to remove both clusters the + * bitmap would equal 0x11. + ******************************************************************************/ +void ccn_enter_snoop_dvm_domain(unsigned long long master_iface_map) +{ + unsigned long long rn_id_map; + + rn_id_map = ccn_master_to_rn_id_map(master_iface_map); + ccn_snoop_dvm_do_op(rn_id_map, + CCN_GET_HN_NODEID_MAP(ccn_plat_desc->periphbase, + MN_HNF_NODEID_OFFSET), + HNF_REGION_ID_START, + HNF_SDC_SET_OFFSET, + HNF_SDC_STAT_OFFSET); + + ccn_snoop_dvm_do_op(rn_id_map, + CCN_GET_MN_NODEID_MAP(ccn_plat_desc->periphbase), + MN_REGION_ID, + MN_DDC_SET_OFFSET, + MN_DDC_STAT_OFFSET); +} + +void ccn_exit_snoop_dvm_domain(unsigned long long master_iface_map) +{ + unsigned long long rn_id_map; + + rn_id_map = ccn_master_to_rn_id_map(master_iface_map); + ccn_snoop_dvm_do_op(rn_id_map, + CCN_GET_HN_NODEID_MAP(ccn_plat_desc->periphbase, + MN_HNF_NODEID_OFFSET), + HNF_REGION_ID_START, + HNF_SDC_CLR_OFFSET, + HNF_SDC_STAT_OFFSET); + + ccn_snoop_dvm_do_op(rn_id_map, + CCN_GET_MN_NODEID_MAP(ccn_plat_desc->periphbase), + MN_REGION_ID, + MN_DDC_CLR_OFFSET, + MN_DDC_STAT_OFFSET); +} + +void ccn_enter_dvm_domain(unsigned long long master_iface_map) +{ + unsigned long long rn_id_map; + + rn_id_map = ccn_master_to_rn_id_map(master_iface_map); + ccn_snoop_dvm_do_op(rn_id_map, + CCN_GET_MN_NODEID_MAP(ccn_plat_desc->periphbase), + MN_REGION_ID, + MN_DDC_SET_OFFSET, + MN_DDC_STAT_OFFSET); +} + +void ccn_exit_dvm_domain(unsigned long long master_iface_map) +{ + unsigned long long rn_id_map; + + rn_id_map = ccn_master_to_rn_id_map(master_iface_map); + ccn_snoop_dvm_do_op(rn_id_map, + CCN_GET_MN_NODEID_MAP(ccn_plat_desc->periphbase), + MN_REGION_ID, + MN_DDC_CLR_OFFSET, + MN_DDC_STAT_OFFSET); +} + +/******************************************************************************* + * This function returns the run mode of all the L3 cache partitions in the + * system. The state is expected to be one of NO_L3, SF_ONLY, L3_HAM or + * L3_FAM. Instead of comparing the states reported by all HN-Fs, the state of + * the first present HN-F node is reported. Since the driver does not export an + * interface to program them separately, there is no reason to perform this + * check. An HN-F could report that the L3 cache is transitioning from one mode + * to another e.g. HNF_PM_NOL3_2_SFONLY. In this case, the function waits for + * the transition to complete and reports the final state. + ******************************************************************************/ +unsigned int ccn_get_l3_run_mode(void) +{ + unsigned long long hnf_pstate_stat; + + assert(ccn_plat_desc); + assert(ccn_plat_desc->periphbase); + + /* + * Wait for a L3 cache partition to enter any run mode. The pstate + * parameter is read from an HN-F P-state status register. A non-zero + * value in bits[1:0] means that the cache is transitioning to a run + * mode. + */ + do { + hnf_pstate_stat = ccn_reg_read(ccn_plat_desc->periphbase, + HNF_REGION_ID_START, + HNF_PSTATE_STAT_OFFSET); + } while (hnf_pstate_stat & 0x3); + + return PSTATE_TO_RUN_MODE(hnf_pstate_stat); +} + +/******************************************************************************* + * This function sets the run mode of all the L3 cache partitions in the + * system to one of NO_L3, SF_ONLY, L3_HAM or L3_FAM depending upon the state + * specified by the 'mode' argument. + ******************************************************************************/ +void ccn_set_l3_run_mode(unsigned int mode) +{ + unsigned long long mn_hnf_id_map, hnf_pstate_stat; + unsigned int region_id; + + assert(ccn_plat_desc); + assert(ccn_plat_desc->periphbase); + assert(mode <= CCN_L3_RUN_MODE_FAM); + + mn_hnf_id_map = ccn_reg_read(ccn_plat_desc->periphbase, + MN_REGION_ID, + MN_HNF_NODEID_OFFSET); + region_id = HNF_REGION_ID_START; + + /* Program the desired run mode */ + FOR_EACH_PRESENT_REGION_ID(region_id, mn_hnf_id_map) { + ccn_reg_write(ccn_plat_desc->periphbase, + region_id, + HNF_PSTATE_REQ_OFFSET, + mode); + } + + /* Wait for the caches to transition to the run mode */ + region_id = HNF_REGION_ID_START; + FOR_EACH_PRESENT_REGION_ID(region_id, mn_hnf_id_map) { + /* + * Wait for a L3 cache partition to enter a target run + * mode. The pstate parameter is read from an HN-F P-state + * status register. + */ + do { + hnf_pstate_stat = ccn_reg_read(ccn_plat_desc->periphbase, + region_id, + HNF_PSTATE_STAT_OFFSET); + } while (((hnf_pstate_stat & HNF_PSTATE_MASK) >> 2) != mode); + } +} + +/******************************************************************************* + * This function configures system address map and provides option to enable the + * 3SN striping mode of Slave node operation. The Slave node IDs and the Top + * Address bit1 and bit0 are provided as parameters to this function. This + * configuration is needed only if network contains a single SN-F or 3 SN-F and + * must be completed before the first request by the system to normal memory. + ******************************************************************************/ +void ccn_program_sys_addrmap(unsigned int sn0_id, + unsigned int sn1_id, + unsigned int sn2_id, + unsigned int top_addr_bit0, + unsigned int top_addr_bit1, + unsigned char three_sn_en) +{ + unsigned long long mn_hnf_id_map, hnf_sam_ctrl_value; + unsigned int region_id; + + assert(ccn_plat_desc); + assert(ccn_plat_desc->periphbase); + + mn_hnf_id_map = ccn_reg_read(ccn_plat_desc->periphbase, + MN_REGION_ID, + MN_HNF_NODEID_OFFSET); + region_id = HNF_REGION_ID_START; + hnf_sam_ctrl_value = MAKE_HNF_SAM_CTRL_VALUE(sn0_id, + sn1_id, + sn2_id, + top_addr_bit0, + top_addr_bit1, + three_sn_en); + + FOR_EACH_PRESENT_REGION_ID(region_id, mn_hnf_id_map) { + + /* Program the SAM control register */ + ccn_reg_write(ccn_plat_desc->periphbase, + region_id, + HNF_SAM_CTRL_OFFSET, + hnf_sam_ctrl_value); + } + +} + +/******************************************************************************* + * This function returns the part0 id from the peripheralID 0 register + * in CCN. This id can be used to distinguish the CCN variant present in the + * system. + ******************************************************************************/ +int ccn_get_part0_id(uintptr_t periphbase) +{ + assert(periphbase); + return (int)(mmio_read_64(periphbase + + MN_PERIPH_ID_0_1_OFFSET) & 0xFF); +} + +/******************************************************************************* + * This function returns the region id corresponding to a node_id of node_type. + ******************************************************************************/ +static unsigned int get_region_id_for_node(node_types_t node_type, + unsigned int node_id) +{ + unsigned int mn_reg_off, region_id; + unsigned long long node_bitmap; + unsigned int loc_node_id, node_pos_in_map = 0; + + assert(node_type < NUM_NODE_TYPES); + assert(node_id < MAX_RN_NODES); + + switch (node_type) { + case NODE_TYPE_RNI: + region_id = RNI_REGION_ID_START; + break; + case NODE_TYPE_HNF: + region_id = HNF_REGION_ID_START; + break; + case NODE_TYPE_HNI: + region_id = HNI_REGION_ID_START; + break; + case NODE_TYPE_SN: + region_id = SBSX_REGION_ID_START; + break; + default: + ERROR("Un-supported Node Type = %d.\n", node_type); + assert(false); + return REGION_ID_LIMIT; + } + /* + * RN-I, HN-F, HN-I, SN node registers in the MN region + * occupy contiguous 16 byte apart offsets. + * + * RN-F and RN-D node are not supported as + * none of them exposes any memory map to + * configure any of their offset registers. + */ + + mn_reg_off = MN_RNF_NODEID_OFFSET + (node_type << 4); + node_bitmap = ccn_reg_read(ccn_plat_desc->periphbase, + MN_REGION_ID, mn_reg_off); + + assert((node_bitmap & (1ULL << (node_id))) != 0U); + + + FOR_EACH_PRESENT_NODE_ID(loc_node_id, node_bitmap) { + INFO("Index = %u with loc_nod=%u and input nod=%u\n", + node_pos_in_map, loc_node_id, node_id); + if (loc_node_id == node_id) + break; + node_pos_in_map++; + } + + if (node_pos_in_map == CCN_MAX_RN_MASTERS) { + ERROR("Node Id = %d, is not found.\n", node_id); + assert(false); + return REGION_ID_LIMIT; + } + + /* + * According to section 3.1.1 in CCN specification, region offset for + * the RN-I components is calculated as (128 + NodeID of RN-I). + */ + if (node_type == NODE_TYPE_RNI) + region_id += node_id; + else + region_id += node_pos_in_map; + + return region_id; +} + +/******************************************************************************* + * This function sets the value 'val' to the register at register_offset from + * the base address pointed to by the region_id. + * where, region id is mapped to a node_id of node_type. + ******************************************************************************/ +void ccn_write_node_reg(node_types_t node_type, unsigned int node_id, + unsigned int reg_offset, unsigned long long val) +{ + unsigned int region_id = get_region_id_for_node(node_type, node_id); + + if (reg_offset > REGION_ID_OFFSET) { + ERROR("Invalid Register offset 0x%x is provided.\n", + reg_offset); + assert(false); + return; + } + + /* Setting the value of Auxiliary Control Register of the Node */ + ccn_reg_write(ccn_plat_desc->periphbase, region_id, reg_offset, val); + VERBOSE("Value is successfully written at address 0x%lx.\n", + (ccn_plat_desc->periphbase + + region_id_to_base(region_id)) + + reg_offset); +} + +/******************************************************************************* + * This function read the value 'val' stored in the register at register_offset + * from the base address pointed to by the region_id. + * where, region id is mapped to a node_id of node_type. + ******************************************************************************/ +unsigned long long ccn_read_node_reg(node_types_t node_type, + unsigned int node_id, + unsigned int reg_offset) +{ + unsigned long long val; + unsigned int region_id = get_region_id_for_node(node_type, node_id); + + if (reg_offset > REGION_ID_OFFSET) { + ERROR("Invalid Register offset 0x%x is provided.\n", + reg_offset); + assert(false); + return ULL(0); + } + + /* Setting the value of Auxiliary Control Register of the Node */ + val = ccn_reg_read(ccn_plat_desc->periphbase, region_id, reg_offset); + VERBOSE("Value is successfully read from address 0x%lx.\n", + (ccn_plat_desc->periphbase + + region_id_to_base(region_id)) + + reg_offset); + + return val; +} diff --git a/drivers/arm/ccn/ccn_private.h b/drivers/arm/ccn/ccn_private.h new file mode 100644 index 0000000..8a936d9 --- /dev/null +++ b/drivers/arm/ccn/ccn_private.h @@ -0,0 +1,233 @@ +/* + * Copyright (c) 2015-2016, ARM Limited and Contributors. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef CCN_PRIVATE_H +#define CCN_PRIVATE_H + +/* + * A CCN implementation can have a maximum of 64 Request nodes with node IDs + * from 0-63. These IDs are split across the three types of Request nodes + * i.e. RN-F, RN-D and RN-I. + */ +#define MAX_RN_NODES 64 + +/* Enum used to loop through the 3 types of Request nodes */ +typedef enum rn_types { + RN_TYPE_RNF = 0, + RN_TYPE_RNI, + RN_TYPE_RND, + NUM_RN_TYPES +} rn_types_t; + +/* Macro to convert a region id to its base address */ +#define region_id_to_base(id) ((id) << 16) + +/* + * Macro to calculate the number of master interfaces resident on a RN-I/RN-D. + * Value of first two bits of the RN-I/D node type + 1 == Maximum number of + * ACE-Lite or ACE-Lite+DVM interfaces supported on this node. E.g. + * + * 0x14 : RN-I with 1 ACE-Lite interface + * 0x15 : RN-I with 2 ACE-Lite interfaces + * 0x16 : RN-I with 3 ACE-Lite interfaces + */ +#define rn_type_id_to_master_cnt(id) (((id) & 0x3) + 1) + +/* + * Constants used to identify a region in the programmer's view. These are + * common for all regions. + */ +#define REGION_ID_LIMIT 256 +#define REGION_ID_OFFSET 0xFF00 + +#define REGION_NODE_ID_SHIFT 8 +#define REGION_NODE_ID_MASK 0x7f +#define get_node_id(id_reg) (((id_reg) >> REGION_NODE_ID_SHIFT) \ + & REGION_NODE_ID_MASK) + +#define REGION_NODE_TYPE_SHIFT 0 +#define REGION_NODE_TYPE_MASK 0x1f +#define get_node_type(id_reg) (((id_reg) >> REGION_NODE_TYPE_SHIFT) \ + & REGION_NODE_TYPE_MASK) + +/* Common offsets of registers to enter or exit a snoop/dvm domain */ +#define DOMAIN_CTRL_STAT_OFFSET 0x0200 +#define DOMAIN_CTRL_SET_OFFSET 0x0210 +#define DOMAIN_CTRL_CLR_OFFSET 0x0220 + +/* + * Thess macros are used to determine if an operation to add or remove a Request + * node from the snoop/dvm domain has completed. 'rn_id_map' is a bit map of + * nodes. It was used to program the SET or CLEAR control register. The type of + * register is specified by 'op_reg_offset'. 'status_reg' is the bit map of + * nodes currently present in the snoop/dvm domain. 'rn_id_map' and 'status_reg' + * are logically ANDed and the result it stored back in the 'status_reg'. There + * are two outcomes of this operation: + * + * 1. If the DOMAIN_CTRL_SET_OFFSET register was programmed, then the set bits in + * 'rn_id_map' should appear in 'status_reg' when the operation completes. So + * after the AND operation, at some point of time 'status_reg' should equal + * 'rn_id_map'. + * + * 2. If the DOMAIN_CTRL_CLR_OFFSET register was programmed, then the set bits in + * 'rn_id_map' should disappear in 'status_reg' when the operation + * completes. So after the AND operation, at some point of time 'status_reg' + * should equal 0. + */ +#define WAIT_FOR_DOMAIN_CTRL_OP_COMPLETION(region_id, stat_reg_offset, \ + op_reg_offset, rn_id_map) \ + { \ + unsigned long long status_reg; \ + do { \ + status_reg = ccn_reg_read((ccn_plat_desc->periphbase), \ + (region_id), \ + (stat_reg_offset)); \ + status_reg &= (rn_id_map); \ + } while ((op_reg_offset) == DOMAIN_CTRL_SET_OFFSET ? \ + (rn_id_map) != status_reg : status_reg); \ + } + +/* + * Region ID of the Miscellaneous Node is always 0 as its located at the base of + * the programmer's view. + */ +#define MN_REGION_ID 0 + +#define MN_REGION_ID_START 0 +#define DEBUG_REGION_ID_START 1 +#define HNI_REGION_ID_START 8 +#define SBSX_REGION_ID_START 16 +#define HNF_REGION_ID_START 32 +#define XP_REGION_ID_START 64 +#define RNI_REGION_ID_START 128 + +/* Selected register offsets from the base of a HNF region */ +#define HNF_CFG_CTRL_OFFSET 0x0000 +#define HNF_SAM_CTRL_OFFSET 0x0008 +#define HNF_PSTATE_REQ_OFFSET 0x0010 +#define HNF_PSTATE_STAT_OFFSET 0x0018 +#define HNF_SDC_STAT_OFFSET DOMAIN_CTRL_STAT_OFFSET +#define HNF_SDC_SET_OFFSET DOMAIN_CTRL_SET_OFFSET +#define HNF_SDC_CLR_OFFSET DOMAIN_CTRL_CLR_OFFSET +#define HNF_AUX_CTRL_OFFSET 0x0500 + +/* Selected register offsets from the base of a MN region */ +#define MN_SAR_OFFSET 0x0000 +#define MN_RNF_NODEID_OFFSET 0x0180 +#define MN_RNI_NODEID_OFFSET 0x0190 +#define MN_RND_NODEID_OFFSET 0x01A0 +#define MN_HNF_NODEID_OFFSET 0x01B0 +#define MN_HNI_NODEID_OFFSET 0x01C0 +#define MN_SN_NODEID_OFFSET 0x01D0 +#define MN_DDC_STAT_OFFSET DOMAIN_CTRL_STAT_OFFSET +#define MN_DDC_SET_OFFSET DOMAIN_CTRL_SET_OFFSET +#define MN_DDC_CLR_OFFSET DOMAIN_CTRL_CLR_OFFSET +#define MN_PERIPH_ID_0_1_OFFSET 0xFE0 +#define MN_ID_OFFSET REGION_ID_OFFSET + +/* HNF System Address Map register bit masks and shifts */ +#define HNF_SAM_CTRL_SN_ID_MASK 0x7f +#define HNF_SAM_CTRL_SN0_ID_SHIFT 0 +#define HNF_SAM_CTRL_SN1_ID_SHIFT 8 +#define HNF_SAM_CTRL_SN2_ID_SHIFT 16 + +#define HNF_SAM_CTRL_TAB0_MASK ULL(0x3f) +#define HNF_SAM_CTRL_TAB0_SHIFT 48 +#define HNF_SAM_CTRL_TAB1_MASK ULL(0x3f) +#define HNF_SAM_CTRL_TAB1_SHIFT 56 + +#define HNF_SAM_CTRL_3SN_ENB_SHIFT 32 +#define HNF_SAM_CTRL_3SN_ENB_MASK ULL(0x01) + +/* + * Macro to create a value suitable for programming into a HNF SAM Control + * register for enabling 3SN striping. + */ +#define MAKE_HNF_SAM_CTRL_VALUE(sn0, sn1, sn2, tab0, tab1, three_sn_en) \ + ((((sn0) & HNF_SAM_CTRL_SN_ID_MASK) << HNF_SAM_CTRL_SN0_ID_SHIFT) | \ + (((sn1) & HNF_SAM_CTRL_SN_ID_MASK) << HNF_SAM_CTRL_SN1_ID_SHIFT) | \ + (((sn2) & HNF_SAM_CTRL_SN_ID_MASK) << HNF_SAM_CTRL_SN2_ID_SHIFT) | \ + (((tab0) & HNF_SAM_CTRL_TAB0_MASK) << HNF_SAM_CTRL_TAB0_SHIFT) | \ + (((tab1) & HNF_SAM_CTRL_TAB1_MASK) << HNF_SAM_CTRL_TAB1_SHIFT) | \ + (((three_sn_en) & HNF_SAM_CTRL_3SN_ENB_MASK) << HNF_SAM_CTRL_3SN_ENB_SHIFT)) + +/* Mask to read the power state value from an HN-F P-state register */ +#define HNF_PSTATE_MASK 0xf + +/* Macro to extract the run mode from a p-state value */ +#define PSTATE_TO_RUN_MODE(pstate) (((pstate) & HNF_PSTATE_MASK) >> 2) + +/* + * Helper macro that iterates through a given bit map. In each iteration, + * it returns the position of the set bit. + * It can be used by other utility macros to iterates through all nodes + * or masters given a bit map of them. + */ +#define FOR_EACH_BIT(bit_pos, bit_map) \ + for (bit_pos = __builtin_ctzll(bit_map); \ + bit_map; \ + bit_map &= ~(1ULL << (bit_pos)), \ + bit_pos = __builtin_ctzll(bit_map)) + +/* + * Utility macro that iterates through a bit map of node IDs. In each + * iteration, it returns the ID of the next present node in the bit map. Node + * ID of a present node == Position of set bit == Number of zeroes trailing the + * bit. + */ +#define FOR_EACH_PRESENT_NODE_ID(node_id, bit_map) \ + FOR_EACH_BIT(node_id, bit_map) + +/* + * Helper function to return number of set bits in bitmap + */ +static inline unsigned int count_set_bits(unsigned long long bitmap) +{ + unsigned int count = 0; + + for (; bitmap; bitmap &= bitmap - 1) + ++count; + + return count; +} + +/* + * Utility macro that iterates through a bit map of node IDs. In each iteration, + * it returns the ID of the next present region corresponding to a node present + * in the bit map. Region ID of a present node is in between passed region id + * and region id + number of set bits in the bitmap i.e. the number of present + * nodes. + */ +#define FOR_EACH_PRESENT_REGION_ID(region_id, bit_map) \ + for (unsigned long long region_id_limit = count_set_bits(bit_map) \ + + region_id; \ + region_id < region_id_limit; \ + region_id++) + +/* + * Same macro as FOR_EACH_PRESENT_NODE, but renamed to indicate it traverses + * through a bit map of master interfaces. + */ +#define FOR_EACH_PRESENT_MASTER_INTERFACE(iface_id, bit_map) \ + FOR_EACH_BIT(iface_id, bit_map) + +/* + * Macro that returns the node id bit map for the Miscellaneous Node + */ +#define CCN_GET_MN_NODEID_MAP(periphbase) \ + (1 << get_node_id(ccn_reg_read(periphbase, MN_REGION_ID, \ + REGION_ID_OFFSET))) + +/* + * This macro returns the bitmap of Home nodes on the basis of the + * 'mn_hn_id_reg_offset' parameter from the Miscellaneous node's (MN) + * programmer's view. The MN has a register which carries the bitmap of present + * Home nodes of each type i.e. HN-Fs, HN-Is & HN-Ds. + */ +#define CCN_GET_HN_NODEID_MAP(periphbase, mn_hn_id_reg_offset) \ + ccn_reg_read(periphbase, MN_REGION_ID, mn_hn_id_reg_offset) + +#endif /* CCN_PRIVATE_H */ |