diff options
Diffstat (limited to 'drivers/marvell/comphy/phy-comphy-3700.h')
| -rw-r--r-- | drivers/marvell/comphy/phy-comphy-3700.h | 249 |
1 files changed, 249 insertions, 0 deletions
diff --git a/drivers/marvell/comphy/phy-comphy-3700.h b/drivers/marvell/comphy/phy-comphy-3700.h new file mode 100644 index 0000000..ed07624 --- /dev/null +++ b/drivers/marvell/comphy/phy-comphy-3700.h @@ -0,0 +1,249 @@ +/* + * Copyright (C) 2018-2021 Marvell International Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + * https://spdx.org/licenses + */ + +#ifndef PHY_COMPHY_3700_H +#define PHY_COMPHY_3700_H + +#define PLL_SET_DELAY_US 600 +#define COMPHY_PLL_TIMEOUT 1000 +#define REG_16_BIT_MASK 0xFFFF + +#define COMPHY_SELECTOR_PHY_REG 0xFC +/* bit0: 0: Lane1 is GbE0; 1: Lane1 is PCIE */ +#define COMPHY_SELECTOR_PCIE_GBE0_SEL_BIT BIT(0) +/* bit4: 0: Lane0 is GbE1; 1: Lane0 is USB3 */ +#define COMPHY_SELECTOR_USB3_GBE1_SEL_BIT BIT(4) +/* bit8: 0: Lane0 is USB3 instead of GbE1, Lane2 is SATA; 1: Lane2 is USB3 */ +#define COMPHY_SELECTOR_USB3_PHY_SEL_BIT BIT(8) + +/* SATA PHY register offset */ +#define SATAPHY_LANE2_REG_BASE_OFFSET 0x200 + +/* USB3 PHY offset compared to SATA PHY */ +#define USB3PHY_LANE2_REG_BASE_OFFSET 0x200 + +/* Comphy lane2 indirect access register offset */ +#define COMPHY_LANE2_INDIR_ADDR_OFFSET 0x0 +#define COMPHY_LANE2_INDIR_DATA_OFFSET 0x4 + +/* PHY shift to get related register address */ +enum { + PCIE = 1, + USB3, +}; + +#define PCIEPHY_SHFT 2 +#define USB3PHY_SHFT 2 +#define PHY_SHFT(unit) ((unit == PCIE) ? PCIEPHY_SHFT : USB3PHY_SHFT) + +/* PHY register */ +#define COMPHY_POWER_PLL_CTRL 0x01 +#define PWR_PLL_CTRL_ADDR(unit) (COMPHY_POWER_PLL_CTRL * PHY_SHFT(unit)) +#define PU_IVREF_BIT BIT(15) +#define PU_PLL_BIT BIT(14) +#define PU_RX_BIT BIT(13) +#define PU_TX_BIT BIT(12) +#define PU_TX_INTP_BIT BIT(11) +#define PU_DFE_BIT BIT(10) +#define RESET_DTL_RX_BIT BIT(9) +#define PLL_LOCK_BIT BIT(8) +#define REF_FREF_SEL_OFFSET 0 +#define REF_FREF_SEL_MASK (0x1F << REF_FREF_SEL_OFFSET) +#define REF_FREF_SEL_SERDES_25MHZ (0x1 << REF_FREF_SEL_OFFSET) +#define REF_FREF_SEL_SERDES_40MHZ (0x3 << REF_FREF_SEL_OFFSET) +#define REF_FREF_SEL_SERDES_50MHZ (0x4 << REF_FREF_SEL_OFFSET) +#define REF_FREF_SEL_PCIE_USB3_25MHZ (0x2 << REF_FREF_SEL_OFFSET) +#define REF_FREF_SEL_PCIE_USB3_40MHZ (0x3 << REF_FREF_SEL_OFFSET) +#define PHY_MODE_OFFSET 5 +#define PHY_MODE_MASK (7 << PHY_MODE_OFFSET) +#define PHY_MODE_SATA (0x0 << PHY_MODE_OFFSET) +#define PHY_MODE_PCIE (0x3 << PHY_MODE_OFFSET) +#define PHY_MODE_SGMII (0x4 << PHY_MODE_OFFSET) +#define PHY_MODE_USB3 (0x5 << PHY_MODE_OFFSET) + +#define COMPHY_KVCO_CAL_CTRL 0x02 +#define KVCO_CAL_CTRL_ADDR(unit) (COMPHY_KVCO_CAL_CTRL * PHY_SHFT(unit)) +#define USE_MAX_PLL_RATE_BIT BIT(12) +#define SPEED_PLL_OFFSET 2 +#define SPEED_PLL_MASK (0x3F << SPEED_PLL_OFFSET) +#define SPEED_PLL_VALUE_16 (0x10 << SPEED_PLL_OFFSET) + +#define COMPHY_DIG_LOOPBACK_EN 0x23 +#define DIG_LOOPBACK_EN_ADDR(unit) (COMPHY_DIG_LOOPBACK_EN * \ + PHY_SHFT(unit)) +#define SEL_DATA_WIDTH_OFFSET 10 +#define SEL_DATA_WIDTH_MASK (0x3 << SEL_DATA_WIDTH_OFFSET) +#define DATA_WIDTH_10BIT (0x0 << SEL_DATA_WIDTH_OFFSET) +#define DATA_WIDTH_20BIT (0x1 << SEL_DATA_WIDTH_OFFSET) +#define DATA_WIDTH_40BIT (0x2 << SEL_DATA_WIDTH_OFFSET) +#define PLL_READY_TX_BIT BIT(4) + +#define COMPHY_SYNC_PATTERN 0x24 +#define SYNC_PATTERN_ADDR(unit) (COMPHY_SYNC_PATTERN * PHY_SHFT(unit)) +#define TXD_INVERT_BIT BIT(10) +#define RXD_INVERT_BIT BIT(11) + +#define COMPHY_SYNC_MASK_GEN 0x25 +#define PHY_GEN_MAX_OFFSET 10 +#define PHY_GEN_MAX_MASK (3 << PHY_GEN_MAX_OFFSET) +#define PHY_GEN_MAX_USB3_5G (1 << PHY_GEN_MAX_OFFSET) + +#define COMPHY_ISOLATION_CTRL 0x26 +#define ISOLATION_CTRL_ADDR(unit) (COMPHY_ISOLATION_REG * PHY_SHFT(unit)) +#define PHY_ISOLATE_MODE BIT(15) + +#define COMPHY_GEN2_SET2 0x3e +#define GEN2_SET2_ADDR(unit) (COMPHY_GEN2_SET2 * PHY_SHFT(unit)) +#define GS2_TX_SSC_AMP_VALUE_20 BIT(14) +#define GS2_TX_SSC_AMP_OFF 9 +#define GS2_TX_SSC_AMP_LEN 7 +#define GS2_TX_SSC_AMP_MASK (((1 << GS2_TX_SSC_AMP_LEN) - 1) << \ + GS2_TX_SSC_AMP_OFF) +#define GS2_VREG_RXTX_MAS_ISET_OFF 7 +#define GS2_VREG_RXTX_MAS_ISET_60U (0 << GS2_VREG_RXTX_MAS_ISET_OFF) +#define GS2_VREG_RXTX_MAS_ISET_80U (1 << GS2_VREG_RXTX_MAS_ISET_OFF) +#define GS2_VREG_RXTX_MAS_ISET_100U (2 << GS2_VREG_RXTX_MAS_ISET_OFF) +#define GS2_VREG_RXTX_MAS_ISET_120U (3 << GS2_VREG_RXTX_MAS_ISET_OFF) +#define GS2_VREG_RXTX_MAS_ISET_MASK (BIT(7) | BIT(8)) +#define GS2_RSVD_6_0_OFF 0 +#define GS2_RSVD_6_0_LEN 7 +#define GS2_RSVD_6_0_MASK (((1 << GS2_RSVD_6_0_LEN) - 1) << \ + GS2_RSVD_6_0_OFF) + +#define COMPHY_GEN3_SET2 0x3f +#define GEN3_SET2_ADDR(unit) (COMPHY_GEN3_SET2 * PHY_SHFT(unit)) + +#define COMPHY_IDLE_SYNC_EN 0x48 +#define IDLE_SYNC_EN_ADDR(unit) (COMPHY_IDLE_SYNC_EN * PHY_SHFT(unit)) +#define IDLE_SYNC_EN BIT(12) +#define IDLE_SYNC_EN_DEFAULT_VALUE 0x60 + +#define COMPHY_MISC_CTRL0 0x4F +#define MISC_CTRL0_ADDR(unit) (COMPHY_MISC_CTRL0 * PHY_SHFT(unit)) +#define CLK100M_125M_EN BIT(4) +#define TXDCLK_2X_SEL BIT(6) +#define CLK500M_EN BIT(7) +#define PHY_REF_CLK_SEL BIT(10) +#define MISC_CTRL0_DEFAULT_VALUE 0xA00D + +#define COMPHY_MISC_CTRL1 0x73 +#define MISC_CTRL1_ADDR(unit) (COMPHY_MISC_CTRL1 * PHY_SHFT(unit)) +#define SEL_BITS_PCIE_FORCE BIT(15) + +#define COMPHY_GEN2_SET3 0x112 +#define GS3_FFE_CAP_SEL_MASK 0xF +#define GS3_FFE_CAP_SEL_VALUE 0xF + +#define COMPHY_LANE_CFG0 0x180 +#define LANE_CFG0_ADDR(unit) (COMPHY_LANE_CFG0 * PHY_SHFT(unit)) +#define PRD_TXDEEMPH0_MASK BIT(0) +#define PRD_TXMARGIN_MASK (BIT(1) | BIT(2) | BIT(3)) +#define PRD_TXSWING_MASK BIT(4) +#define CFG_TX_ALIGN_POS_MASK (BIT(5) | BIT(6) | BIT(7) | BIT(8)) + +#define COMPHY_LANE_CFG1 0x181 +#define LANE_CFG1_ADDR(unit) (COMPHY_LANE_CFG1 * PHY_SHFT(unit)) +#define PRD_TXDEEMPH1_MASK BIT(15) +#define USE_MAX_PLL_RATE_EN BIT(9) +#define TX_DET_RX_MODE BIT(6) +#define GEN2_TX_DATA_DLY_MASK (BIT(3) | BIT(4)) +#define GEN2_TX_DATA_DLY_DEFT (2 << 3) +#define TX_ELEC_IDLE_MODE_EN BIT(0) + +#define COMPHY_LANE_STAT1 0x183 +#define LANE_STAT1_ADDR(unit) (COMPHY_LANE_STAT1 * PHY_SHFT(unit)) +#define TXDCLK_PCLK_EN BIT(0) + +#define COMPHY_LANE_CFG4 0x188 +#define LANE_CFG4_ADDR(unit) (COMPHY_LANE_CFG4 * PHY_SHFT(unit)) +#define SPREAD_SPECTRUM_CLK_EN BIT(7) + +#define COMPHY_RST_CLK_CTRL 0x1C1 +#define RST_CLK_CTRL_ADDR(unit) (COMPHY_RST_CLK_CTRL * PHY_SHFT(unit)) +#define SOFT_RESET BIT(0) +#define MODE_CORE_CLK_FREQ_SEL BIT(9) +#define MODE_PIPE_WIDTH_32 BIT(3) +#define MODE_REFDIV_OFFSET 4 +#define MODE_REFDIV_LEN 2 +#define MODE_REFDIV_MASK (0x3 << MODE_REFDIV_OFFSET) +#define MODE_REFDIV_BY_4 (0x2 << MODE_REFDIV_OFFSET) + +#define COMPHY_TEST_MODE_CTRL 0x1C2 +#define TEST_MODE_CTRL_ADDR(unit) (COMPHY_TEST_MODE_CTRL * PHY_SHFT(unit)) +#define MODE_MARGIN_OVERRIDE BIT(2) + +#define COMPHY_CLK_SRC_LO 0x1C3 +#define CLK_SRC_LO_ADDR(unit) (COMPHY_CLK_SRC_LO * PHY_SHFT(unit)) +#define MODE_CLK_SRC BIT(0) +#define BUNDLE_PERIOD_SEL BIT(1) +#define BUNDLE_PERIOD_SCALE_MASK (BIT(2) | BIT(3)) +#define BUNDLE_SAMPLE_CTRL BIT(4) +#define PLL_READY_DLY_MASK (BIT(5) | BIT(6) | BIT(7)) +#define CFG_SEL_20B BIT(15) + +#define COMPHY_PWR_MGM_TIM1 0x1D0 +#define PWR_MGM_TIM1_ADDR(unit) (COMPHY_PWR_MGM_TIM1 * PHY_SHFT(unit)) +#define CFG_PM_OSCCLK_WAIT_OFF 12 +#define CFG_PM_OSCCLK_WAIT_LEN 4 +#define CFG_PM_OSCCLK_WAIT_MASK (((1 << CFG_PM_OSCCLK_WAIT_LEN) - 1) \ + << CFG_PM_OSCCLK_WAIT_OFF) +#define CFG_PM_RXDEN_WAIT_OFF 8 +#define CFG_PM_RXDEN_WAIT_LEN 4 +#define CFG_PM_RXDEN_WAIT_MASK (((1 << CFG_PM_RXDEN_WAIT_LEN) - 1) \ + << CFG_PM_RXDEN_WAIT_OFF) +#define CFG_PM_RXDEN_WAIT_1_UNIT (1 << CFG_PM_RXDEN_WAIT_OFF) +#define CFG_PM_RXDLOZ_WAIT_OFF 0 +#define CFG_PM_RXDLOZ_WAIT_LEN 8 +#define CFG_PM_RXDLOZ_WAIT_MASK (((1 << CFG_PM_RXDLOZ_WAIT_LEN) - 1) \ + << CFG_PM_RXDLOZ_WAIT_OFF) +#define CFG_PM_RXDLOZ_WAIT_7_UNIT (7 << CFG_PM_RXDLOZ_WAIT_OFF) +#define CFG_PM_RXDLOZ_WAIT_12_UNIT (0xC << CFG_PM_RXDLOZ_WAIT_OFF) + +/* + * This register is not from PHY lane register space. It only exists in the + * indirect register space, before the actual PHY lane 2 registers. So the + * offset is absolute, not relative to SATAPHY_LANE2_REG_BASE_OFFSET. + * It is used only for SATA PHY initialization. + */ +#define COMPHY_RESERVED_REG 0x0E +#define PHYCTRL_FRM_PIN_BIT BIT(13) + +/* SGMII */ +#define COMPHY_PHY_CFG1_OFFSET(lane) ((1 - (lane)) * 0x28) +#define PIN_PU_IVREF_BIT BIT(1) +#define PIN_RESET_CORE_BIT BIT(11) +#define PIN_RESET_COMPHY_BIT BIT(12) +#define PIN_PU_PLL_BIT BIT(16) +#define PIN_PU_RX_BIT BIT(17) +#define PIN_PU_TX_BIT BIT(18) +#define PIN_TX_IDLE_BIT BIT(19) +#define GEN_RX_SEL_OFFSET 22 +#define GEN_RX_SEL_MASK (0xF << GEN_RX_SEL_OFFSET) +#define GEN_TX_SEL_OFFSET 26 +#define GEN_TX_SEL_MASK (0xF << GEN_TX_SEL_OFFSET) +#define PHY_RX_INIT_BIT BIT(30) +#define SD_SPEED_1_25_G 0x6 +#define SD_SPEED_3_125_G 0x8 + +/* COMPHY status reg: + * lane0: USB3/GbE1 PHY Status 1 + * lane1: PCIe/GbE0 PHY Status 1 + */ +#define COMPHY_PHY_STATUS_OFFSET(lane) (0x18 + (1 - (lane)) * 0x28) +#define PHY_RX_INIT_DONE_BIT BIT(0) +#define PHY_PLL_READY_RX_BIT BIT(2) +#define PHY_PLL_READY_TX_BIT BIT(3) + +#define SGMIIPHY_ADDR(off, base) ((((off) & 0x00007FF) * 2) + (base)) + +#define MAX_LANE_NR 3 + +/* comphy API */ +int mvebu_3700_comphy_is_pll_locked(uint8_t comphy_index, uint32_t comphy_mode); +int mvebu_3700_comphy_power_off(uint8_t comphy_index, uint32_t comphy_mode); +int mvebu_3700_comphy_power_on(uint8_t comphy_index, uint32_t comphy_mode); +#endif /* PHY_COMPHY_3700_H */ |