1 files changed, 108 insertions, 0 deletions
diff --git a/include/drivers/st/regulator.h b/include/drivers/st/regulator.h
new file mode 100644
index 0000000..bf583e2
--- /dev/null
+++ b/include/drivers/st/regulator.h
@@ -0,0 +1,108 @@
+/*
+ * Copyright (c) 2021, STMicroelectronics - All Rights Reserved
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+#ifndef REGULATOR_H
+#define REGULATOR_H
+
+#include <platform_def.h>
+
+#ifndef PLAT_NB_RDEVS
+#error "Missing PLAT_NB_RDEVS"
+#endif
+
+/*
+ * Consumer interface
+ */
+
+/* regulator-always-on : regulator should never be disabled */
+#define REGUL_ALWAYS_ON		BIT(0)
+/*
+ * regulator-boot-on:
+ * It's expected that this regulator was left on by the bootloader.
+ * The core shouldn't prevent it from being turned off later.
+ * The regulator is needed to exit from suspend so it is turned on during suspend entry.
+ */
+#define REGUL_BOOT_ON		BIT(1)
+/* regulator-over-current-protection: Enable over current protection. */
+#define REGUL_OCP		BIT(2)
+/* regulator-active-discharge: enable active discharge. */
+#define REGUL_ACTIVE_DISCHARGE	BIT(3)
+/* regulator-pull-down: Enable pull down resistor when the regulator is disabled. */
+#define REGUL_PULL_DOWN		BIT(4)
+/*
+ * st,mask-reset: set mask reset for the regulator, meaning that the regulator
+ * setting is maintained during pmic reset.
+ */
+#define REGUL_MASK_RESET	BIT(5)
+/* st,regulator-sink-source: set the regulator in sink source mode */
+#define REGUL_SINK_SOURCE	BIT(6)
+/* st,regulator-bypass: set the regulator in bypass mode */
+#define REGUL_ENABLE_BYPASS	BIT(7)
+
+struct rdev *regulator_get_by_name(const char *node_name);
+
+struct rdev *regulator_get_by_supply_name(const void *fdt, int node, const char *name);
+
+int regulator_enable(struct rdev *rdev);
+int regulator_disable(struct rdev *rdev);
+int regulator_is_enabled(const struct rdev *rdev);
+
+int regulator_set_voltage(struct rdev *rdev, uint16_t volt);
+int regulator_set_min_voltage(struct rdev *rdev);
+int regulator_get_voltage(const struct rdev *rdev);
+
+int regulator_list_voltages(const struct rdev *rdev, const uint16_t **levels, size_t *count);
+void regulator_get_range(const struct rdev *rdev, uint16_t *min_mv, uint16_t *max_mv);
+int regulator_set_flag(struct rdev *rdev, uint16_t flag);
+
+/*
+ * Driver Interface
+ */
+
+/* set_state() arguments */
+#define STATE_DISABLE		false
+#define STATE_ENABLE		true
+
+struct regul_description {
+	const char *node_name;
+	const struct regul_ops *ops;
+	const void *driver_data;
+	const char *supply_name;
+	const uint32_t enable_ramp_delay;
+};
+
+struct regul_ops {
+	int (*set_state)(const struct regul_description *desc, bool state);
+	int (*get_state)(const struct regul_description *desc);
+	int (*set_voltage)(const struct regul_description *desc, uint16_t mv);
+	int (*get_voltage)(const struct regul_description *desc);
+	int (*list_voltages)(const struct regul_description *desc,
+			     const uint16_t **levels, size_t *count);
+	int (*set_flag)(const struct regul_description *desc, uint16_t flag);
+	void (*lock)(const struct regul_description *desc);
+	void (*unlock)(const struct regul_description *desc);
+};
+
+int regulator_register(const struct regul_description *desc, int node);
+
+/*
+ * Internal regulator structure
+ * The structure is internal to the core, and the content should not be used
+ * by a consumer nor a driver.
+ */
+struct rdev {
+	const struct regul_description *desc;
+
+	int32_t phandle;
+
+	uint16_t min_mv;
+	uint16_t max_mv;
+
+	uint16_t flags;
+
+	uint32_t enable_ramp_delay;
+};
+
+#endif /* REGULATOR_H */