diff options
Diffstat (limited to 'plat/nxp/soc-ls1088a/soc.def')
| -rw-r--r-- | plat/nxp/soc-ls1088a/soc.def | 86 |
1 files changed, 86 insertions, 0 deletions
diff --git a/plat/nxp/soc-ls1088a/soc.def b/plat/nxp/soc-ls1088a/soc.def new file mode 100644 index 0000000..17c59ff --- /dev/null +++ b/plat/nxp/soc-ls1088a/soc.def @@ -0,0 +1,86 @@ +# +# Copyright 2022 NXP +# +# SPDX-License-Identifier: BSD-3-Clause +# +# +#------------------------------------------------------------------------------ +# +# This file contains the basic architecture definitions that drive the build +# +# ----------------------------------------------------------------------------- + +CORE_TYPE := a53 + +CACHE_LINE := 6 + +# Set to GIC400 or GIC500 +GIC := GIC500 + +# Set to CCI400 or CCN504 or CCN508 +INTERCONNECT := CCI400 + +# Select the DDR PHY generation to be used +PLAT_DDR_PHY := PHY_GEN1 + +PHYS_SYS := 64 + +# Indicate layerscape chassis level - set to 3=LSCH3 or 2=LSCH2 +CHASSIS := 3 + +# TZC IP Details TZC used is TZC380 or TZC400 +TZC_ID := TZC400 + +# CONSOLE Details available is NS16550 or PL011 +CONSOLE := NS16550 + +NXP_SFP_VER := 3_4 + +# In IMAGE_BL2, compile time flag for handling Cache coherency +# with CAAM for BL2 running from OCRAM +SEC_MEM_NON_COHERENT := yes + + +# OCRAM MAP for BL2 +# Before BL2 +# 0x18000000 - 0x18009fff -> Used by ROM code, (TBD - can it be used for xlat tables) +# 0x1800a000 - 0x1801Cfff -> Reserved for BL2 binary (76 KB) +# 0x1801D000 - 0x1801ffff -> CSF header for BL2 (12 KB) +OCRAM_START_ADDR := 0x18000000 +OCRAM_SIZE := 0x20000 + +CSF_HDR_SZ := 0x3000 + +# Area of OCRAM reserved by ROM code +NXP_ROM_RSVD := 0xa000 + +# Input to CST create_hdr_isbc tool +BL2_HDR_LOC := 0x1801D000 + +# Location of BL2 on OCRAM +# BL2_BASE=OCRAM_START_ADDR+NXP_ROM_RSVD +BL2_BASE := 0x1800a000 + +# SoC ERRATUM to be enabled + +# ARM Erratum +ERRATA_A53_855873 := 1 + +# DDR Erratum +ERRATA_DDR_A008511 := 1 +ERRATA_DDR_A009803 := 1 +ERRATA_DDR_A009942 := 1 +ERRATA_DDR_A010165 := 1 + +# Define Endianness of each module +NXP_ESDHC_ENDIANNESS := LE +NXP_SFP_ENDIANNESS := LE +NXP_GPIO_ENDIANNESS := LE +NXP_SNVS_ENDIANNESS := LE +NXP_GUR_ENDIANNESS := LE +NXP_SEC_ENDIANNESS := LE +NXP_DDR_ENDIANNESS := LE +NXP_QSPI_ENDIANNESS := LE + +# OCRAM ECC Enabled +OCRAM_ECC_EN := yes |