diff options
Diffstat (limited to 'plat/socionext/uniphier/platform.mk')
| -rw-r--r-- | plat/socionext/uniphier/platform.mk | 140 |
1 files changed, 140 insertions, 0 deletions
diff --git a/plat/socionext/uniphier/platform.mk b/plat/socionext/uniphier/platform.mk new file mode 100644 index 0000000..d466aa1 --- /dev/null +++ b/plat/socionext/uniphier/platform.mk @@ -0,0 +1,140 @@ +# +# Copyright (c) 2017-2023, ARM Limited and Contributors. All rights reserved. +# +# SPDX-License-Identifier: BSD-3-Clause +# + +override RESET_TO_BL2 := 1 +override COLD_BOOT_SINGLE_CPU := 1 +override PROGRAMMABLE_RESET_ADDRESS := 1 +override USE_COHERENT_MEM := 1 +override ENABLE_SVE_FOR_NS := 0 + +# Disabling ENABLE_PIE saves memory footprint a lot, but you need to adjust +# UNIPHIER_MEM_BASE so that all TF images are loaded at their link addresses. +override ENABLE_PIE := 1 + +ALLOW_RO_XLAT_TABLES := 1 + +ifeq ($(ALLOW_RO_XLAT_TABLES),1) +BL31_CPPFLAGS += -DPLAT_RO_XLAT_TABLES +BL32_CPPFLAGS += -DPLAT_RO_XLAT_TABLES +endif + +# The dynamic xlat table is only used in BL2 +BL2_CPPFLAGS += -DPLAT_XLAT_TABLES_DYNAMIC + +# Cortex-A53 revision r0p4-51rel0 +# needed for LD20, unneeded for LD11, PXs3 (no ACE) +ERRATA_A53_855873 := 1 + +FIP_ALIGN := 512 + +ifeq ($(NEED_BL32),yes) +$(eval $(call add_define,UNIPHIER_LOAD_BL32)) +endif + +# Libraries +include lib/xlat_tables_v2/xlat_tables.mk + +PLAT_PATH := plat/socionext/uniphier +PLAT_INCLUDES := -I$(PLAT_PATH)/include + +# common sources for BL2, BL31 (and BL32 if SPD=tspd) +PLAT_BL_COMMON_SOURCES += plat/common/aarch64/crash_console_helpers.S \ + $(PLAT_PATH)/uniphier_console.S \ + $(PLAT_PATH)/uniphier_console_setup.c \ + $(PLAT_PATH)/uniphier_helpers.S \ + $(PLAT_PATH)/uniphier_soc_info.c \ + $(PLAT_PATH)/uniphier_xlat_setup.c \ + ${XLAT_TABLES_LIB_SRCS} + +BL2_SOURCES += common/desc_image_load.c \ + drivers/io/io_block.c \ + drivers/io/io_fip.c \ + drivers/io/io_memmap.c \ + drivers/io/io_storage.c \ + lib/cpus/aarch64/cortex_a53.S \ + lib/cpus/aarch64/cortex_a72.S \ + $(PLAT_PATH)/uniphier_bl2_setup.c \ + $(PLAT_PATH)/uniphier_boot_device.c \ + $(PLAT_PATH)/uniphier_emmc.c \ + $(PLAT_PATH)/uniphier_image_desc.c \ + $(PLAT_PATH)/uniphier_io_storage.c \ + $(PLAT_PATH)/uniphier_nand.c \ + $(PLAT_PATH)/uniphier_scp.c \ + $(PLAT_PATH)/uniphier_usb.c + +# Include GICv3 driver files +include drivers/arm/gic/v3/gicv3.mk + +BL31_SOURCES += drivers/arm/cci/cci.c \ + ${GICV3_SOURCES} \ + lib/cpus/aarch64/cortex_a53.S \ + lib/cpus/aarch64/cortex_a72.S \ + plat/common/plat_gicv3.c \ + plat/common/plat_psci_common.c \ + $(PLAT_PATH)/uniphier_bl31_setup.c \ + $(PLAT_PATH)/uniphier_boot_device.c \ + $(PLAT_PATH)/uniphier_cci.c \ + $(PLAT_PATH)/uniphier_gicv3.c \ + $(PLAT_PATH)/uniphier_psci.c \ + $(PLAT_PATH)/uniphier_scp.c \ + $(PLAT_PATH)/uniphier_smp.S \ + $(PLAT_PATH)/uniphier_syscnt.c \ + $(PLAT_PATH)/uniphier_topology.c + +ifeq (${TRUSTED_BOARD_BOOT},1) + +include drivers/auth/mbedtls/mbedtls_crypto.mk +include drivers/auth/mbedtls/mbedtls_x509.mk + +BL2_SOURCES += drivers/auth/auth_mod.c \ + drivers/auth/crypto_mod.c \ + drivers/auth/img_parser_mod.c \ + drivers/auth/tbbr/tbbr_cot_common.c \ + drivers/auth/tbbr/tbbr_cot_bl2.c \ + plat/common/tbbr/plat_tbbr.c \ + $(PLAT_PATH)/uniphier_rotpk.S \ + $(PLAT_PATH)/uniphier_tbbr.c + +ROT_KEY = $(BUILD_PLAT)/rot_key.pem +ROTPK_HASH = $(BUILD_PLAT)/rotpk_sha256.bin + +$(eval $(call add_define_val,ROTPK_HASH,'"$(ROTPK_HASH)"')) +$(BUILD_PLAT)/bl2/uniphier_rotpk.o: $(ROTPK_HASH) + +certificates: $(ROT_KEY) +$(ROT_KEY): | $(BUILD_PLAT) + @echo " OPENSSL $@" + $(Q)${OPENSSL_BIN_PATH}/openssl genrsa 2048 > $@ 2>/dev/null + +$(ROTPK_HASH): $(ROT_KEY) + @echo " OPENSSL $@" + $(Q)${OPENSSL_BIN_PATH}/openssl rsa -in $< -pubout -outform DER 2>/dev/null |\ + ${OPENSSL_BIN_PATH}/openssl dgst -sha256 -binary > $@ 2>/dev/null + +endif + +ifeq (${FIP_GZIP},1) + +include lib/zlib/zlib.mk + +BL2_SOURCES += common/image_decompress.c \ + $(ZLIB_SOURCES) + +$(eval $(call add_define,UNIPHIER_DECOMPRESS_GZIP)) + +# compress all images loaded by BL2 +SCP_BL2_PRE_TOOL_FILTER := GZIP +BL31_PRE_TOOL_FILTER := GZIP +BL32_PRE_TOOL_FILTER := GZIP +BL33_PRE_TOOL_FILTER := GZIP + +endif + +.PHONY: bl2_gzip +bl2_gzip: $(BUILD_PLAT)/bl2.bin.gz +%.gz: % + @echo " GZIP $@" + $(Q)gzip -n -f -9 $< --stdout > $@ |