From be58c81aff4cd4c0ccf43dbd7998da4a6a08c03b Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 21 Apr 2024 19:43:51 +0200 Subject: Adding upstream version 2.10.0+dfsg. Signed-off-by: Daniel Baumann --- docs/components/secure-partition-manager.rst | 1673 ++++++++++++++++++++++++++ 1 file changed, 1673 insertions(+) create mode 100644 docs/components/secure-partition-manager.rst (limited to 'docs/components/secure-partition-manager.rst') diff --git a/docs/components/secure-partition-manager.rst b/docs/components/secure-partition-manager.rst new file mode 100644 index 0000000..5d3adec --- /dev/null +++ b/docs/components/secure-partition-manager.rst @@ -0,0 +1,1673 @@ +Secure Partition Manager +************************ + +.. contents:: + +.. toctree:: + ffa-manifest-binding + +Acronyms +======== + ++--------+--------------------------------------+ +| CoT | Chain of Trust | ++--------+--------------------------------------+ +| DMA | Direct Memory Access | ++--------+--------------------------------------+ +| DTB | Device Tree Blob | ++--------+--------------------------------------+ +| DTS | Device Tree Source | ++--------+--------------------------------------+ +| EC | Execution Context | ++--------+--------------------------------------+ +| FIP | Firmware Image Package | ++--------+--------------------------------------+ +| FF-A | Firmware Framework for Arm A-profile | ++--------+--------------------------------------+ +| IPA | Intermediate Physical Address | ++--------+--------------------------------------+ +| JOP | Jump-Oriented Programming | ++--------+--------------------------------------+ +| NWd | Normal World | ++--------+--------------------------------------+ +| ODM | Original Design Manufacturer | ++--------+--------------------------------------+ +| OEM | Original Equipment Manufacturer | ++--------+--------------------------------------+ +| PA | Physical Address | ++--------+--------------------------------------+ +| PE | Processing Element | ++--------+--------------------------------------+ +| PM | Power Management | ++--------+--------------------------------------+ +| PVM | Primary VM | ++--------+--------------------------------------+ +| ROP | Return-Oriented Programming | ++--------+--------------------------------------+ +| SMMU | System Memory Management Unit | ++--------+--------------------------------------+ +| SP | Secure Partition | ++--------+--------------------------------------+ +| SPD | Secure Payload Dispatcher | ++--------+--------------------------------------+ +| SPM | Secure Partition Manager | ++--------+--------------------------------------+ +| SPMC | SPM Core | ++--------+--------------------------------------+ +| SPMD | SPM Dispatcher | ++--------+--------------------------------------+ +| SiP | Silicon Provider | ++--------+--------------------------------------+ +| SWd | Secure World | ++--------+--------------------------------------+ +| TLV | Tag-Length-Value | ++--------+--------------------------------------+ +| TOS | Trusted Operating System | ++--------+--------------------------------------+ +| VM | Virtual Machine | ++--------+--------------------------------------+ + +Foreword +======== + +Three implementations of a Secure Partition Manager co-exist in the TF-A +codebase: + +#. S-EL2 SPMC based on the FF-A specification `[1]`_, enabling virtualization in + the secure world, managing multiple S-EL1 or S-EL0 partitions. +#. EL3 SPMC based on the FF-A specification, managing a single S-EL1 partition + without virtualization in the secure world. +#. EL3 SPM based on the MM specification, legacy implementation managing a + single S-EL0 partition `[2]`_. + +These implementations differ in their respective SW architecture and only one +can be selected at build time. This document: + +- describes the implementation from bullet 1. when the SPMC resides at S-EL2. +- is not an architecture specification and it might provide assumptions + on sections mandated as implementation-defined in the specification. +- covers the implications to TF-A used as a bootloader, and Hafnium used as a + reference code base for an S-EL2/SPMC secure firmware on platforms + implementing the FEAT_SEL2 architecture extension. + +Terminology +----------- + +- The term Hypervisor refers to the NS-EL2 component managing Virtual Machines + (or partitions) in the normal world. +- The term SPMC refers to the S-EL2 component managing secure partitions in + the secure world when the FEAT_SEL2 architecture extension is implemented. +- Alternatively, SPMC can refer to an S-EL1 component, itself being a secure + partition and implementing the FF-A ABI on platforms not implementing the + FEAT_SEL2 architecture extension. +- The term VM refers to a normal world Virtual Machine managed by an Hypervisor. +- The term SP refers to a secure world "Virtual Machine" managed by an SPMC. + +Support for legacy platforms +---------------------------- + +The SPM is split into a dispatcher and a core component (respectively SPMD and +SPMC) residing at different exception levels. To permit the FF-A specification +adoption and a smooth migration, the SPMD supports an SPMC residing either at +S-EL1 or S-EL2: + +- The SPMD is located at EL3 and mainly relays the FF-A protocol from NWd + (Hypervisor or OS kernel) to the SPMC. +- The same SPMD component is used for both S-EL1 and S-EL2 SPMC configurations. +- The SPMC exception level is a build time choice. + +TF-A supports both cases: + +- S-EL1 SPMC for platforms not supporting the FEAT_SEL2 architecture + extension. The SPMD relays the FF-A protocol from EL3 to S-EL1. +- S-EL2 SPMC for platforms implementing the FEAT_SEL2 architecture + extension. The SPMD relays the FF-A protocol from EL3 to S-EL2. + +Sample reference stack +====================== + +The following diagram illustrates a possible configuration when the +FEAT_SEL2 architecture extension is implemented, showing the SPMD +and SPMC, one or multiple secure partitions, with an optional +Hypervisor: + +.. image:: ../resources/diagrams/ff-a-spm-sel2.png + +TF-A build options +================== + +This section explains the TF-A build options involved in building with +support for an FF-A based SPM where the SPMD is located at EL3 and the +SPMC located at S-EL1, S-EL2 or EL3: + +- **SPD=spmd**: this option selects the SPMD component to relay the FF-A + protocol from NWd to SWd back and forth. It is not possible to + enable another Secure Payload Dispatcher when this option is chosen. +- **SPMD_SPM_AT_SEL2**: this option adjusts the SPMC exception + level to being at S-EL2. It defaults to enabled (value 1) when + SPD=spmd is chosen. +- **SPMC_AT_EL3**: this option adjusts the SPMC exception level to being + at EL3. +- If neither ``SPMD_SPM_AT_SEL2`` or ``SPMC_AT_EL3`` are enabled the SPMC + exception level is set to S-EL1. + ``SPMD_SPM_AT_SEL2`` is enabled. The context save/restore routine + and exhaustive list of registers is visible at `[4]`_. +- **SPMC_AT_EL3_SEL0_SP**: this option enables the support to load SEL0 SP + when SPMC at EL3 support is enabled. +- **SP_LAYOUT_FILE**: this option specifies a text description file + providing paths to SP binary images and manifests in DTS format + (see `Describing secure partitions`_). It + is required when ``SPMD_SPM_AT_SEL2`` is enabled hence when multiple + secure partitions are to be loaded by BL2 on behalf of the SPMC. + ++---------------+------------------+-------------+-------------------------+ +| | SPMD_SPM_AT_SEL2 | SPMC_AT_EL3 | CTX_INCLUDE_EL2_REGS(*) | ++---------------+------------------+-------------+-------------------------+ +| SPMC at S-EL1 | 0 | 0 | 0 | ++---------------+------------------+-------------+-------------------------+ +| SPMC at S-EL2 | 1 (default when | 0 | 1 | +| | SPD=spmd) | | | ++---------------+------------------+-------------+-------------------------+ +| SPMC at EL3 | 0 | 1 | 0 | ++---------------+------------------+-------------+-------------------------+ + +Other combinations of such build options either break the build or are not +supported. + +Notes: + +- Only Arm's FVP platform is supported to use with the TF-A reference software + stack. +- When ``SPMD_SPM_AT_SEL2=1``, the reference software stack assumes enablement + of FEAT_PAuth, FEAT_BTI and FEAT_MTE architecture extensions. +- ``(*) CTX_INCLUDE_EL2_REGS``, this flag is |TF-A| internal and informational + in this table. When set, it provides the generic support for saving/restoring + EL2 registers required when S-EL2 firmware is present. +- BL32 option is re-purposed to specify the SPMC image. It can specify either + the Hafnium binary path (built for the secure world) or the path to a TEE + binary implementing FF-A interfaces. +- BL33 option can specify the TFTF binary or a normal world loader + such as U-Boot or the UEFI framework payload. + +Sample TF-A build command line when the SPMC is located at S-EL1 +(e.g. when the FEAT_SEL2 architecture extension is not implemented): + +.. code:: shell + + make \ + CROSS_COMPILE=aarch64-none-elf- \ + SPD=spmd \ + SPMD_SPM_AT_SEL2=0 \ + BL32= \ + BL33= \ + PLAT=fvp \ + all fip + +Sample TF-A build command line when FEAT_SEL2 architecture extension is +implemented and the SPMC is located at S-EL2: + +.. code:: shell + + make \ + CROSS_COMPILE=aarch64-none-elf- \ + PLAT=fvp \ + SPD=spmd \ + ARM_ARCH_MINOR=5 \ + BRANCH_PROTECTION=1 \ + CTX_INCLUDE_PAUTH_REGS=1 \ + CTX_INCLUDE_MTE_REGS=1 \ + BL32= \ + BL33= \ + SP_LAYOUT_FILE=sp_layout.json \ + all fip + +Sample TF-A build command line when FEAT_SEL2 architecture extension is +implemented, the SPMC is located at S-EL2, and enabling secure boot: + +.. code:: shell + + make \ + CROSS_COMPILE=aarch64-none-elf- \ + PLAT=fvp \ + SPD=spmd \ + ARM_ARCH_MINOR=5 \ + BRANCH_PROTECTION=1 \ + CTX_INCLUDE_PAUTH_REGS=1 \ + CTX_INCLUDE_MTE_REGS=1 \ + BL32= \ + BL33= \ + SP_LAYOUT_FILE=sp_layout.json \ + MBEDTLS_DIR= \ + TRUSTED_BOARD_BOOT=1 \ + COT=dualroot \ + ARM_ROTPK_LOCATION=devel_rsa \ + ROT_KEY=plat/arm/board/common/rotpk/arm_rotprivk_rsa.pem \ + GENERATE_COT=1 \ + all fip + +Sample TF-A build command line when the SPMC is located at EL3: + +.. code:: shell + + make \ + CROSS_COMPILE=aarch64-none-elf- \ + SPD=spmd \ + SPMD_SPM_AT_SEL2=0 \ + SPMC_AT_EL3=1 \ + BL32= \ + BL33= \ + PLAT=fvp \ + all fip + +Sample TF-A build command line when the SPMC is located at EL3 and SEL0 SP is +enabled: + +.. code:: shell + + make \ + CROSS_COMPILE=aarch64-none-elf- \ + SPD=spmd \ + SPMD_SPM_AT_SEL2=0 \ + SPMC_AT_EL3=1 \ + SPMC_AT_EL3_SEL0_SP=1 \ + BL32= \ + BL33= \ + PLAT=fvp \ + all fip + +FVP model invocation +==================== + +The FVP command line needs the following options to exercise the S-EL2 SPMC: + ++---------------------------------------------------+------------------------------------+ +| - cluster0.has_arm_v8-5=1 | Implements FEAT_SEL2, FEAT_PAuth, | +| - cluster1.has_arm_v8-5=1 | and FEAT_BTI. | ++---------------------------------------------------+------------------------------------+ +| - pci.pci_smmuv3.mmu.SMMU_AIDR=2 | Parameters required for the | +| - pci.pci_smmuv3.mmu.SMMU_IDR0=0x0046123B | SMMUv3.2 modeling. | +| - pci.pci_smmuv3.mmu.SMMU_IDR1=0x00600002 | | +| - pci.pci_smmuv3.mmu.SMMU_IDR3=0x1714 | | +| - pci.pci_smmuv3.mmu.SMMU_IDR5=0xFFFF0472 | | +| - pci.pci_smmuv3.mmu.SMMU_S_IDR1=0xA0000002 | | +| - pci.pci_smmuv3.mmu.SMMU_S_IDR2=0 | | +| - pci.pci_smmuv3.mmu.SMMU_S_IDR3=0 | | ++---------------------------------------------------+------------------------------------+ +| - cluster0.has_branch_target_exception=1 | Implements FEAT_BTI. | +| - cluster1.has_branch_target_exception=1 | | ++---------------------------------------------------+------------------------------------+ +| - cluster0.has_pointer_authentication=2 | Implements FEAT_PAuth | +| - cluster1.has_pointer_authentication=2 | | ++---------------------------------------------------+------------------------------------+ +| - cluster0.memory_tagging_support_level=2 | Implements FEAT_MTE2 | +| - cluster1.memory_tagging_support_level=2 | | +| - bp.dram_metadata.is_enabled=1 | | ++---------------------------------------------------+------------------------------------+ + +Sample FVP command line invocation: + +.. code:: shell + + /FVP_Base_RevC-2xAEMvA -C pctl.startup=0.0.0.0 \ + -C cluster0.NUM_CORES=4 -C cluster1.NUM_CORES=4 -C bp.secure_memory=1 \ + -C bp.secureflashloader.fname=trusted-firmware-a/build/fvp/debug/bl1.bin \ + -C bp.flashloader0.fname=trusted-firmware-a/build/fvp/debug/fip.bin \ + -C bp.pl011_uart0.out_file=fvp-uart0.log -C bp.pl011_uart1.out_file=fvp-uart1.log \ + -C bp.pl011_uart2.out_file=fvp-uart2.log \ + -C cluster0.has_arm_v8-5=1 -C cluster1.has_arm_v8-5=1 \ + -C cluster0.has_pointer_authentication=2 -C cluster1.has_pointer_authentication=2 \ + -C cluster0.has_branch_target_exception=1 -C cluster1.has_branch_target_exception=1 \ + -C cluster0.memory_tagging_support_level=2 -C cluster1.memory_tagging_support_level=2 \ + -C bp.dram_metadata.is_enabled=1 \ + -C pci.pci_smmuv3.mmu.SMMU_AIDR=2 -C pci.pci_smmuv3.mmu.SMMU_IDR0=0x0046123B \ + -C pci.pci_smmuv3.mmu.SMMU_IDR1=0x00600002 -C pci.pci_smmuv3.mmu.SMMU_IDR3=0x1714 \ + -C pci.pci_smmuv3.mmu.SMMU_IDR5=0xFFFF0472 -C pci.pci_smmuv3.mmu.SMMU_S_IDR1=0xA0000002 \ + -C pci.pci_smmuv3.mmu.SMMU_S_IDR2=0 -C pci.pci_smmuv3.mmu.SMMU_S_IDR3=0 + +Boot process +============ + +Loading Hafnium and secure partitions in the secure world +--------------------------------------------------------- + +TF-A BL2 is the bootlader for the SPMC and SPs in the secure world. + +SPs may be signed by different parties (SiP, OEM/ODM, TOS vendor, etc.). +Thus they are supplied as distinct signed entities within the FIP flash +image. The FIP image itself is not signed hence this provides the ability +to upgrade SPs in the field. + +Booting through TF-A +-------------------- + +SP manifests +~~~~~~~~~~~~ + +An SP manifest describes SP attributes as defined in `[1]`_ +(partition manifest at virtual FF-A instance) in DTS format. It is +represented as a single file associated with the SP. A sample is +provided by `[5]`_. A binding document is provided by `[6]`_. + +Secure Partition packages +~~~~~~~~~~~~~~~~~~~~~~~~~ + +Secure partitions are bundled as independent package files consisting +of: + +- a header +- a DTB +- an image payload + +The header starts with a magic value and offset values to SP DTB and +image payload. Each SP package is loaded independently by BL2 loader +and verified for authenticity and integrity. + +The SP package identified by its UUID (matching FF-A uuid property) is +inserted as a single entry into the FIP at end of the TF-A build flow +as shown: + +.. code:: shell + + Trusted Boot Firmware BL2: offset=0x1F0, size=0x8AE1, cmdline="--tb-fw" + EL3 Runtime Firmware BL31: offset=0x8CD1, size=0x13000, cmdline="--soc-fw" + Secure Payload BL32 (Trusted OS): offset=0x1BCD1, size=0x15270, cmdline="--tos-fw" + Non-Trusted Firmware BL33: offset=0x30F41, size=0x92E0, cmdline="--nt-fw" + HW_CONFIG: offset=0x3A221, size=0x2348, cmdline="--hw-config" + TB_FW_CONFIG: offset=0x3C569, size=0x37A, cmdline="--tb-fw-config" + SOC_FW_CONFIG: offset=0x3C8E3, size=0x48, cmdline="--soc-fw-config" + TOS_FW_CONFIG: offset=0x3C92B, size=0x427, cmdline="--tos-fw-config" + NT_FW_CONFIG: offset=0x3CD52, size=0x48, cmdline="--nt-fw-config" + B4B5671E-4A90-4FE1-B81F-FB13DAE1DACB: offset=0x3CD9A, size=0xC168, cmdline="--blob" + D1582309-F023-47B9-827C-4464F5578FC8: offset=0x48F02, size=0xC168, cmdline="--blob" + +.. uml:: ../resources/diagrams/plantuml/fip-secure-partitions.puml + +Describing secure partitions +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +A json-formatted description file is passed to the build flow specifying paths +to the SP binary image and associated DTS partition manifest file. The latter +is processed by the dtc compiler to generate a DTB fed into the SP package. +Optionally, the partition's json description can contain offsets for both +the image and partition manifest within the SP package. Both offsets need to be +4KB aligned, because it is the translation granule supported by Hafnium SPMC. +These fields can be leveraged to support SPs with S1 translation granules that +differ from 4KB, and to configure the regions allocated within the SP package, +as well as to comply with the requirements for the implementation of the boot +information protocol (see `Passing boot data to the SP`_ for more details). In +case the offsets are absent in their json node, they default to 0x1000 and +0x4000 for the manifest offset and image offset respectively. +This file also specifies the SP owner (as an optional field) identifying the +signing domain in case of dual root CoT. +The SP owner can either be the silicon or the platform provider. The +corresponding "owner" field value can either take the value of "SiP" or "Plat". +In absence of "owner" field, it defaults to "SiP" owner. +The UUID of the partition can be specified as a field in the description file or +if it does not exist there the UUID is extracted from the DTS partition +manifest. + +.. code:: shell + + { + "tee1" : { + "image": "tee1.bin", + "pm": "tee1.dts", + "owner": "SiP", + "uuid": "1b1820fe-48f7-4175-8999-d51da00b7c9f" + }, + + "tee2" : { + "image": "tee2.bin", + "pm": "tee2.dts", + "owner": "Plat" + }, + + "tee3" : { + "image": { + "file": "tee3.bin", + "offset":"0x2000" + }, + "pm": { + "file": "tee3.dts", + "offset":"0x6000" + }, + "owner": "Plat" + }, + } + +SPMC manifest +~~~~~~~~~~~~~ + +This manifest contains the SPMC *attribute* node consumed by the SPMD at boot +time. It implements `[1]`_ (SP manifest at physical FF-A instance) and serves +two different cases: + +- The SPMC resides at S-EL1: the SPMC manifest is used by the SPMD to setup a + SP that co-resides with the SPMC and executes at S-EL1 or Secure Supervisor + mode. +- The SPMC resides at S-EL2: the SPMC manifest is used by the SPMD to setup + the environment required by the SPMC to run at S-EL2. SPs run at S-EL1 or + S-EL0. + +.. code:: shell + + attribute { + spmc_id = <0x8000>; + maj_ver = <0x1>; + min_ver = <0x1>; + exec_state = <0x0>; + load_address = <0x0 0x6000000>; + entrypoint = <0x0 0x6000000>; + binary_size = <0x60000>; + }; + +- *spmc_id* defines the endpoint ID value that SPMC can query through + ``FFA_ID_GET``. +- *maj_ver/min_ver*. SPMD checks provided version versus its internal + version and aborts if not matching. +- *exec_state* defines the SPMC execution state (AArch64 or AArch32). + Notice Hafnium used as a SPMC only supports AArch64. +- *load_address* and *binary_size* are mostly used to verify secondary + entry points fit into the loaded binary image. +- *entrypoint* defines the cold boot primary core entry point used by + SPMD (currently matches ``BL32_BASE``) to enter the SPMC. + +Other nodes in the manifest are consumed by Hafnium in the secure world. +A sample can be found at `[7]`_: + +- The *hypervisor* node describes SPs. *is_ffa_partition* boolean attribute + indicates a FF-A compliant SP. The *load_address* field specifies the load + address at which BL2 loaded the SP package. +- *cpus* node provide the platform topology and allows MPIDR to VMPIDR mapping. + Note the primary core is declared first, then secondary cores are declared + in reverse order. +- The *memory* nodes provide platform information on the ranges of memory + available for use by SPs at runtime. These ranges relate to either + secure or non-secure memory, depending on the *device_type* field. + If the field specifies "memory" the range is secure, else if it specifies + "ns-memory" the memory is non-secure. The system integrator must exclude + the memory used by other components that are not SPs, such as the monitor, + or the SPMC itself, the OS Kernel/Hypervisor, or other NWd VMs. The SPMC + limits the SP's address space such that they do not access memory outside + of those ranges. + +SPMC boot +~~~~~~~~~ + +The SPMC is loaded by BL2 as the BL32 image. + +The SPMC manifest is loaded by BL2 as the ``TOS_FW_CONFIG`` image `[9]`_. + +BL2 passes the SPMC manifest address to BL31 through a register. + +At boot time, the SPMD in BL31 runs from the primary core, initializes the core +contexts and launches the SPMC (BL32) passing the following information through +registers: + +- X0 holds the ``TOS_FW_CONFIG`` physical address (or SPMC manifest blob). +- X1 holds the ``HW_CONFIG`` physical address. +- X4 holds the currently running core linear id. + +Loading of SPs +~~~~~~~~~~~~~~ + +At boot time, BL2 loads SPs sequentially in addition to the SPMC as depicted +below: + +.. uml:: ../resources/diagrams/plantuml/bl2-loading-sp.puml + +Note this boot flow is an implementation sample on Arm's FVP platform. +Platforms not using TF-A's *Firmware CONFiguration* framework would adjust to a +different boot flow. The flow restricts to a maximum of 8 secure partitions. + +Secure boot +~~~~~~~~~~~ + +The SP content certificate is inserted as a separate FIP item so that BL2 loads SPMC, +SPMC manifest, secure partitions and verifies them for authenticity and integrity. +Refer to TBBR specification `[3]`_. + +The multiple-signing domain feature (in current state dual signing domain `[8]`_) allows +the use of two root keys namely S-ROTPK and NS-ROTPK: + +- SPMC (BL32) and SPMC manifest are signed by the SiP using the S-ROTPK. +- BL33 may be signed by the OEM using NS-ROTPK. +- An SP may be signed either by SiP (using S-ROTPK) or by OEM (using NS-ROTPK). +- A maximum of 4 partitions can be signed with the S-ROTPK key and 4 partitions + signed with the NS-ROTPK key. + +Also refer to `Describing secure partitions`_ and `TF-A build options`_ sections. + +Hafnium in the secure world +=========================== + +General considerations +---------------------- + +Build platform for the secure world +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +In the Hafnium reference implementation specific code parts are only relevant to +the secure world. Such portions are isolated in architecture specific files +and/or enclosed by a ``SECURE_WORLD`` macro. + +Secure partitions scheduling +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The FF-A specification `[1]`_ provides two ways to relinquinsh CPU time to +secure partitions. For this a VM (Hypervisor or OS kernel), or SP invokes one of: + +- the FFA_MSG_SEND_DIRECT_REQ interface. +- the FFA_RUN interface. + +Additionally a secure interrupt can pre-empt the normal world execution and give +CPU cycles by transitioning to EL3 and S-EL2. + +Platform topology +~~~~~~~~~~~~~~~~~ + +The *execution-ctx-count* SP manifest field can take the value of one or the +total number of PEs. The FF-A specification `[1]`_ recommends the +following SP types: + +- Pinned MP SPs: an execution context matches a physical PE. MP SPs must + implement the same number of ECs as the number of PEs in the platform. +- Migratable UP SPs: a single execution context can run and be migrated on any + physical PE. Such SP declares a single EC in its SP manifest. An UP SP can + receive a direct message request originating from any physical core targeting + the single execution context. + +Parsing SP partition manifests +------------------------------ + +Hafnium consumes SP manifests as defined in `[1]`_ and `SP manifests`_. +Note the current implementation may not implement all optional fields. + +The SP manifest may contain memory and device regions nodes. In case of +an S-EL2 SPMC: + +- Memory regions are mapped in the SP EL1&0 Stage-2 translation regime at + load time (or EL1&0 Stage-1 for an S-EL1 SPMC). A memory region node can + specify RX/TX buffer regions in which case it is not necessary for an SP + to explicitly invoke the ``FFA_RXTX_MAP`` interface. The memory referred + shall be contained within the memory ranges defined in SPMC manifest. The + NS bit in the attributes field should be consistent with the security + state of the range that it relates to. I.e. non-secure memory shall be + part of a non-secure memory range, and secure memory shall be contained + in a secure memory range of a given platform. +- Device regions are mapped in the SP EL1&0 Stage-2 translation regime (or + EL1&0 Stage-1 for an S-EL1 SPMC) as peripherals and possibly allocate + additional resources (e.g. interrupts). + +For the S-EL2 SPMC, base addresses for memory and device region nodes are IPAs +provided the SPMC identity maps IPAs to PAs within SP EL1&0 Stage-2 translation +regime. + +Note: in the current implementation both VTTBR_EL2 and VSTTBR_EL2 point to the +same set of page tables. It is still open whether two sets of page tables shall +be provided per SP. The memory region node as defined in the specification +provides a memory security attribute hinting to map either to the secure or +non-secure EL1&0 Stage-2 table if it exists. + +Passing boot data to the SP +--------------------------- + +In `[1]`_ , the section "Boot information protocol" defines a method for passing +data to the SPs at boot time. It specifies the format for the boot information +descriptor and boot information header structures, which describe the data to be +exchanged between SPMC and SP. +The specification also defines the types of data that can be passed. +The aggregate of both the boot info structures and the data itself is designated +the boot information blob, and is passed to a Partition as a contiguous memory +region. + +Currently, the SPM implementation supports the FDT type which is used to pass the +partition's DTB manifest. + +The region for the boot information blob is allocated through the SP package. + +.. image:: ../resources/diagrams/partition-package.png + +To adjust the space allocated for the boot information blob, the json description +of the SP (see section `Describing secure partitions`_) shall be updated to contain +the manifest offset. If no offset is provided the manifest offset defaults to 0x1000, +which is the page size in the Hafnium SPMC. + +The configuration of the boot protocol is done in the SPs manifest. As defined by +the specification, the manifest field 'gp-register-num' configures the GP register +which shall be used to pass the address to the partitions boot information blob when +booting the partition. +In addition, the Hafnium SPMC implementation requires the boot information arguments +to be listed in a designated DT node: + +.. code:: shell + + boot-info { + compatible = "arm,ffa-manifest-boot-info"; + ffa_manifest; + }; + +The whole secure partition package image (see `Secure Partition packages`_) is +mapped to the SP secure EL1&0 Stage-2 translation regime. As such, the SP can +retrieve the address for the boot information blob in the designated GP register, +process the boot information header and descriptors, access its own manifest +DTB blob and extract its partition manifest properties. + +SP Boot order +------------- + +SP manifests provide an optional boot order attribute meant to resolve +dependencies such as an SP providing a service required to properly boot +another SP. SPMC boots the SPs in accordance to the boot order attribute, +lowest to the highest value. If the boot order attribute is absent from the FF-A +manifest, the SP is treated as if it had the highest boot order value +(i.e. lowest booting priority). + +It is possible for an SP to call into another SP through a direct request +provided the latter SP has already been booted. + +Boot phases +----------- + +Primary core boot-up +~~~~~~~~~~~~~~~~~~~~ + +Upon boot-up, BL31 hands over to the SPMC (BL32) on the primary boot physical +core. The SPMC performs its platform initializations and registers the SPMC +secondary physical core entry point physical address by the use of the +`FFA_SECONDARY_EP_REGISTER`_ interface (SMC invocation from the SPMC to the SPMD +at secure physical FF-A instance). + +The SPMC then creates secure partitions based on SP packages and manifests. Each +secure partition is launched in sequence (`SP Boot order`_) on their "primary" +execution context. If the primary boot physical core linear id is N, an MP SP is +started using EC[N] on PE[N] (see `Platform topology`_). If the partition is a +UP SP, it is started using its unique EC0 on PE[N]. + +The SP primary EC (or the EC used when the partition is booted as described +above): + +- Performs the overall SP boot time initialization, and in case of a MP SP, + prepares the SP environment for other execution contexts. +- In the case of a MP SP, it invokes the FFA_SECONDARY_EP_REGISTER at secure + virtual FF-A instance (SMC invocation from SP to SPMC) to provide the IPA + entry point for other execution contexts. +- Exits through ``FFA_MSG_WAIT`` to indicate successful initialization or + ``FFA_ERROR`` in case of failure. + +Secondary cores boot-up +~~~~~~~~~~~~~~~~~~~~~~~ + +Once the system is started and NWd brought up, a secondary physical core is +woken up by the ``PSCI_CPU_ON`` service invocation. The TF-A SPD hook mechanism +calls into the SPMD on the newly woken up physical core. Then the SPMC is +entered at the secondary physical core entry point. + +In the current implementation, the first SP is resumed on the coresponding EC +(the virtual CPU which matches the physical core). The implication is that the +first SP must be a MP SP. + +In a linux based system, once secure and normal worlds are booted but prior to +a NWd FF-A driver has been loaded: + +- The first SP has initialized all its ECs in response to primary core boot up + (at system initialization) and secondary core boot up (as a result of linux + invoking PSCI_CPU_ON for all secondary cores). +- Other SPs have their first execution context initialized as a result of secure + world initialization on the primary boot core. Other ECs for those SPs have to + be run first through ffa_run to complete their initialization (which results + in the EC completing with FFA_MSG_WAIT). + +Refer to `Power management`_ for further details. + +Notifications +------------- + +The FF-A v1.1 specification `[1]`_ defines notifications as an asynchronous +communication mechanism with non-blocking semantics. It allows for one FF-A +endpoint to signal another for service provision, without hindering its current +progress. + +Hafnium currently supports 64 notifications. The IDs of each notification define +a position in a 64-bit bitmap. + +The signaling of notifications can interchangeably happen between NWd and SWd +FF-A endpoints. + +The SPMC is in charge of managing notifications from SPs to SPs, from SPs to +VMs, and from VMs to SPs. An hypervisor component would only manage +notifications from VMs to VMs. Given the SPMC has no visibility of the endpoints +deployed in NWd, the Hypervisor or OS kernel must invoke the interface +FFA_NOTIFICATION_BITMAP_CREATE to allocate the notifications bitmap per FF-A +endpoint in the NWd that supports it. + +A sender can signal notifications once the receiver has provided it with +permissions. Permissions are provided by invoking the interface +FFA_NOTIFICATION_BIND. + +Notifications are signaled by invoking FFA_NOTIFICATION_SET. Henceforth +they are considered to be in a pending sate. The receiver can retrieve its +pending notifications invoking FFA_NOTIFICATION_GET, which, from that moment, +are considered to be handled. + +Per the FF-A v1.1 spec, each FF-A endpoint must be associated with a scheduler +that is in charge of donating CPU cycles for notifications handling. The +FF-A driver calls FFA_NOTIFICATION_INFO_GET to retrieve the information about +which FF-A endpoints have pending notifications. The receiver scheduler is +called and informed by the FF-A driver, and it should allocate CPU cycles to the +receiver. + +There are two types of notifications supported: + +- Global, which are targeted to a FF-A endpoint and can be handled within any of + its execution contexts, as determined by the scheduler of the system. +- Per-vCPU, which are targeted to a FF-A endpoint and to be handled within a + a specific execution context, as determined by the sender. + +The type of a notification is set when invoking FFA_NOTIFICATION_BIND to give +permissions to the sender. + +Notification signaling resorts to two interrupts: + +- Schedule Receiver Interrupt: non-secure physical interrupt to be handled by + the FF-A driver within the receiver scheduler. At initialization the SPMC + donates a SGI ID chosen from the secure SGI IDs range and configures it as + non-secure. The SPMC triggers this SGI on the currently running core when + there are pending notifications, and the respective receivers need CPU cycles + to handle them. +- Notifications Pending Interrupt: virtual interrupt to be handled by the + receiver of the notification. Set when there are pending notifications for the + given secure partition. The NPI is pended when the NWd relinquishes CPU cycles + to an SP. + +The notifications receipt support is enabled in the partition FF-A manifest. + +Mandatory interfaces +-------------------- + +The following interfaces are exposed to SPs: + +- ``FFA_VERSION`` +- ``FFA_FEATURES`` +- ``FFA_RX_RELEASE`` +- ``FFA_RXTX_MAP`` +- ``FFA_RXTX_UNMAP`` +- ``FFA_PARTITION_INFO_GET`` +- ``FFA_ID_GET`` +- ``FFA_MSG_WAIT`` +- ``FFA_MSG_SEND_DIRECT_REQ`` +- ``FFA_MSG_SEND_DIRECT_RESP`` +- ``FFA_MEM_DONATE`` +- ``FFA_MEM_LEND`` +- ``FFA_MEM_SHARE`` +- ``FFA_MEM_RETRIEVE_REQ`` +- ``FFA_MEM_RETRIEVE_RESP`` +- ``FFA_MEM_RELINQUISH`` +- ``FFA_MEM_FRAG_RX`` +- ``FFA_MEM_FRAG_TX`` +- ``FFA_MEM_RECLAIM`` +- ``FFA_RUN`` + +As part of the FF-A v1.1 support, the following interfaces were added: + + - ``FFA_NOTIFICATION_BITMAP_CREATE`` + - ``FFA_NOTIFICATION_BITMAP_DESTROY`` + - ``FFA_NOTIFICATION_BIND`` + - ``FFA_NOTIFICATION_UNBIND`` + - ``FFA_NOTIFICATION_SET`` + - ``FFA_NOTIFICATION_GET`` + - ``FFA_NOTIFICATION_INFO_GET`` + - ``FFA_SPM_ID_GET`` + - ``FFA_SECONDARY_EP_REGISTER`` + - ``FFA_MEM_PERM_GET`` + - ``FFA_MEM_PERM_SET`` + - ``FFA_MSG_SEND2`` + - ``FFA_RX_ACQUIRE`` + +FFA_VERSION +~~~~~~~~~~~ + +``FFA_VERSION`` requires a *requested_version* parameter from the caller. +The returned value depends on the caller: + +- Hypervisor or OS kernel in NS-EL1/EL2: the SPMD returns the SPMC version + specified in the SPMC manifest. +- SP: the SPMC returns its own implemented version. +- SPMC at S-EL1/S-EL2: the SPMD returns its own implemented version. + +FFA_FEATURES +~~~~~~~~~~~~ + +FF-A features supported by the SPMC may be discovered by secure partitions at +boot (that is prior to NWd is booted) or run-time. + +The SPMC calling FFA_FEATURES at secure physical FF-A instance always get +FFA_SUCCESS from the SPMD. + +The request made by an Hypervisor or OS kernel is forwarded to the SPMC and +the response relayed back to the NWd. + +FFA_RXTX_MAP/FFA_RXTX_UNMAP +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +When invoked from a secure partition FFA_RXTX_MAP maps the provided send and +receive buffers described by their IPAs to the SP EL1&0 Stage-2 translation +regime as secure buffers in the MMU descriptors. + +When invoked from the Hypervisor or OS kernel, the buffers are mapped into the +SPMC EL2 Stage-1 translation regime and marked as NS buffers in the MMU +descriptors. The provided addresses may be owned by a VM in the normal world, +which is expected to receive messages from the secure world. The SPMC will in +this case allocate internal state structures to facilitate RX buffer access +synchronization (through FFA_RX_ACQUIRE interface), and to permit SPs to send +messages. + +The FFA_RXTX_UNMAP unmaps the RX/TX pair from the translation regime of the +caller, either it being the Hypervisor or OS kernel, as well as a secure +partition. + +FFA_PARTITION_INFO_GET +~~~~~~~~~~~~~~~~~~~~~~ + +Partition info get call can originate: + +- from SP to SPMC +- from Hypervisor or OS kernel to SPMC. The request is relayed by the SPMD. + +FFA_ID_GET +~~~~~~~~~~ + +The FF-A id space is split into a non-secure space and secure space: + +- FF-A ID with bit 15 clear relates to VMs. +- FF-A ID with bit 15 set related to SPs. +- FF-A IDs 0, 0xffff, 0x8000 are assigned respectively to the Hypervisor, SPMD + and SPMC. + +The SPMD returns: + +- The default zero value on invocation from the Hypervisor. +- The ``spmc_id`` value specified in the SPMC manifest on invocation from + the SPMC (see `SPMC manifest`_) + +This convention helps the SPMC to determine the origin and destination worlds in +an FF-A ABI invocation. In particular the SPMC shall filter unauthorized +transactions in its world switch routine. It must not be permitted for a VM to +use a secure FF-A ID as origin world by spoofing: + +- A VM-to-SP direct request/response shall set the origin world to be non-secure + (FF-A ID bit 15 clear) and destination world to be secure (FF-A ID bit 15 + set). +- Similarly, an SP-to-SP direct request/response shall set the FF-A ID bit 15 + for both origin and destination IDs. + +An incoming direct message request arriving at SPMD from NWd is forwarded to +SPMC without a specific check. The SPMC is resumed through eret and "knows" the +message is coming from normal world in this specific code path. Thus the origin +endpoint ID must be checked by SPMC for being a normal world ID. + +An SP sending a direct message request must have bit 15 set in its origin +endpoint ID and this can be checked by the SPMC when the SP invokes the ABI. + +The SPMC shall reject the direct message if the claimed world in origin endpoint +ID is not consistent: + +- It is either forwarded by SPMD and thus origin endpoint ID must be a "normal + world ID", +- or initiated by an SP and thus origin endpoint ID must be a "secure world ID". + + +FFA_MSG_SEND_DIRECT_REQ/FFA_MSG_SEND_DIRECT_RESP +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +This is a mandatory interface for secure partitions consisting in direct request +and responses with the following rules: + +- An SP can send a direct request to another SP. +- An SP can receive a direct request from another SP. +- An SP can send a direct response to another SP. +- An SP cannot send a direct request to an Hypervisor or OS kernel. +- An Hypervisor or OS kernel can send a direct request to an SP. +- An SP can send a direct response to an Hypervisor or OS kernel. + +FFA_NOTIFICATION_BITMAP_CREATE/FFA_NOTIFICATION_BITMAP_DESTROY +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The secure partitions notifications bitmap are statically allocated by the SPMC. +Hence, this interface is not to be issued by secure partitions. + +At initialization, the SPMC is not aware of VMs/partitions deployed in the +normal world. Hence, the Hypervisor or OS kernel must use both ABIs for SPMC +to be prepared to handle notifications for the provided VM ID. + +FFA_NOTIFICATION_BIND/FFA_NOTIFICATION_UNBIND +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Pair of interfaces to manage permissions to signal notifications. Prior to +handling notifications, an FF-A endpoint must allow a given sender to signal a +bitmap of notifications. + +If the receiver doesn't have notification support enabled in its FF-A manifest, +it won't be able to bind notifications, hence forbidding it to receive any +notifications. + +FFA_NOTIFICATION_SET/FFA_NOTIFICATION_GET +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +FFA_NOTIFICATION_GET retrieves all pending global notifications and +per-vCPU notifications targeted to the current vCPU. + +Hafnium maintains a global count of pending notifications which gets incremented +and decremented when handling FFA_NOTIFICATION_SET and FFA_NOTIFICATION_GET +respectively. A delayed SRI is triggered if the counter is non-zero when the +SPMC returns to normal world. + +FFA_NOTIFICATION_INFO_GET +~~~~~~~~~~~~~~~~~~~~~~~~~ + +Hafnium maintains a global count of pending notifications whose information +has been retrieved by this interface. The count is incremented and decremented +when handling FFA_NOTIFICATION_INFO_GET and FFA_NOTIFICATION_GET respectively. +It also tracks notifications whose information has been retrieved individually, +such that it avoids duplicating returned information for subsequent calls to +FFA_NOTIFICATION_INFO_GET. For each notification, this state information is +reset when receiver called FFA_NOTIFICATION_GET to retrieve them. + +FFA_SPM_ID_GET +~~~~~~~~~~~~~~ + +Returns the FF-A ID allocated to an SPM component which can be one of SPMD +or SPMC. + +At initialization, the SPMC queries the SPMD for the SPMC ID, using the +FFA_ID_GET interface, and records it. The SPMC can also query the SPMD ID using +the FFA_SPM_ID_GET interface at the secure physical FF-A instance. + +Secure partitions call this interface at the virtual FF-A instance, to which +the SPMC returns the priorly retrieved SPMC ID. + +The Hypervisor or OS kernel can issue the FFA_SPM_ID_GET call handled by the +SPMD, which returns the SPMC ID. + +FFA_SECONDARY_EP_REGISTER +~~~~~~~~~~~~~~~~~~~~~~~~~ + +When the SPMC boots, all secure partitions are initialized on their primary +Execution Context. + +The FFA_SECONDARY_EP_REGISTER interface is to be used by a secure partition +from its first execution context, to provide the entry point address for +secondary execution contexts. + +A secondary EC is first resumed either upon invocation of PSCI_CPU_ON from +the NWd or by invocation of FFA_RUN. + +FFA_RX_ACQUIRE/FFA_RX_RELEASE +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The RX buffers can be used to pass information to an FF-A endpoint in the +following scenarios: + + - When it was targetted by a FFA_MSG_SEND2 invokation from another endpoint. + - Return the result of calling ``FFA_PARTITION_INFO_GET``. + - In a memory share operation, as part of the ``FFA_MEM_RETRIEVE_RESP``, + with the memory descriptor of the shared memory. + +If a normal world VM is expected to exchange messages with secure world, +its RX/TX buffer addresses are forwarded to the SPMC via FFA_RXTX_MAP ABI, +and are from this moment owned by the SPMC. +The hypervisor must call the FFA_RX_ACQUIRE interface before attempting +to use the RX buffer, in any of the aforementioned scenarios. A successful +call to FFA_RX_ACQUIRE transfers ownership of RX buffer to hypervisor, such +that it can be safely used. + +The FFA_RX_RELEASE interface is used after the FF-A endpoint is done with +processing the data received in its RX buffer. If the RX buffer has been +acquired by the hypervisor, the FFA_RX_RELEASE call must be forwarded to +the SPMC to reestablish SPMC's RX ownership. + +An attempt from an SP to send a message to a normal world VM whose RX buffer +was acquired by the hypervisor fails with error code FFA_BUSY, to preserve +the RX buffer integrity. +The operation could then be conducted after FFA_RX_RELEASE. + +FFA_MSG_SEND2 +~~~~~~~~~~~~~ + +Hafnium copies a message from the sender TX buffer into receiver's RX buffer. +For messages from SPs to VMs, operation is only possible if the SPMC owns +the receiver's RX buffer. + +Both receiver and sender need to enable support for indirect messaging, +in their respective partition manifest. The discovery of support +of such feature can be done via FFA_PARTITION_INFO_GET. + +On a successful message send, Hafnium pends an RX buffer full framework +notification for the receiver, to inform it about a message in the RX buffer. + +The handling of framework notifications is similar to that of +global notifications. Binding of these is not necessary, as these are +reserved to be used by the hypervisor or SPMC. + +SPMC-SPMD direct requests/responses +----------------------------------- + +Implementation-defined FF-A IDs are allocated to the SPMC and SPMD. +Using those IDs in source/destination fields of a direct request/response +permits SPMD to SPMC communication and either way. + +- SPMC to SPMD direct request/response uses SMC conduit. +- SPMD to SPMC direct request/response uses ERET conduit. + +This is used in particular to convey power management messages. + +Memory Sharing +-------------- + +Hafnium implements the following memory sharing interfaces: + + - ``FFA_MEM_SHARE`` - for shared access between lender and borrower. + - ``FFA_MEM_LEND`` - borrower to obtain exclusive access, though lender + retains ownership of the memory. + - ``FFA_MEM_DONATE`` - lender permanently relinquishes ownership of memory + to the borrower. + +The ``FFA_MEM_RETRIEVE_REQ`` interface is for the borrower to request the +memory to be mapped into its address space: for S-EL1 partitions the SPM updates +their stage 2 translation regime; for S-EL0 partitions the SPM updates their +stage 1 translation regime. On a successful call, the SPMC responds back with +``FFA_MEM_RETRIEVE_RESP``. + +The ``FFA_MEM_RELINQUISH`` interface is for when the borrower is done with using +a memory region. + +The ``FFA_MEM_RECLAIM`` interface is for the owner of the memory to reestablish +its ownership and exclusive access to the memory shared. + +The memory transaction descriptors are transmitted via RX/TX buffers. In +situations where the size of the memory transaction descriptor exceeds the +size of the RX/TX buffers, Hafnium provides support for fragmented transmission +of the full transaction descriptor. The ``FFA_MEM_FRAG_RX`` and ``FFA_MEM_FRAG_TX`` +interfaces are for receiving and transmitting the next fragment, respectively. + +If lender and borrower(s) are SPs, all memory sharing operations are supported. + +Hafnium also supports memory sharing operations between the normal world and the +secure world. If there is an SP involved, the SPMC allocates data to track the +state of the operation. + +The SPMC is also the designated allocator for the memory handle. The hypervisor +or OS kernel has the possibility to rely on the SPMC to maintain the state +of the operation, thus saving memory. +A lender SP can only donate NS memory to a borrower from the normal world. + +The SPMC supports the hypervisor retrieve request, as defined by the FF-A +v1.1 EAC0 specification, in section 16.4.3. The intent is to aid with operations +that the hypervisor must do for a VM retriever. For example, when handling +an FFA_MEM_RECLAIM, if the hypervisor relies on SPMC to keep the state +of the operation, the hypervisor retrieve request can be used to obtain +that state information, do the necessary validations, and update stage 2 +memory translation. + +Hafnium also supports memory lend and share targetting multiple borrowers. +This is the case for a lender SP to multiple SPs, and for a lender VM to +multiple endpoints (from both secure world and normal world). If there is +at least one borrower VM, the hypervisor is in charge of managing its +stage 2 translation on a successful memory retrieve. +The semantics of ``FFA_MEM_DONATE`` implies ownership transmission, +which should target only one partition. + +The memory share interfaces are backwards compatible with memory transaction +descriptors from FF-A v1.0. These get translated to FF-A v1.1 descriptors for +Hafnium's internal processing of the operation. If the FF-A version of a +borrower is v1.0, Hafnium provides FF-A v1.0 compliant memory transaction +descriptors on memory retrieve response. + +PE MMU configuration +-------------------- + +With secure virtualization enabled (``HCR_EL2.VM = 1``) and for S-EL1 +partitions, two IPA spaces (secure and non-secure) are output from the +secure EL1&0 Stage-1 translation. +The EL1&0 Stage-2 translation hardware is fed by: + +- A secure IPA when the SP EL1&0 Stage-1 MMU is disabled. +- One of secure or non-secure IPA when the secure EL1&0 Stage-1 MMU is enabled. + +``VTCR_EL2`` and ``VSTCR_EL2`` provide configuration bits for controlling the +NS/S IPA translations. The following controls are set up: +``VSTCR_EL2.SW = 0`` , ``VSTCR_EL2.SA = 0``, ``VTCR_EL2.NSW = 0``, +``VTCR_EL2.NSA = 1``: + +- Stage-2 translations for the NS IPA space access the NS PA space. +- Stage-2 translation table walks for the NS IPA space are to the secure PA space. + +Secure and non-secure IPA regions (rooted to by ``VTTBR_EL2`` and ``VSTTBR_EL2``) +use the same set of Stage-2 page tables within a SP. + +The ``VTCR_EL2/VSTCR_EL2/VTTBR_EL2/VSTTBR_EL2`` virtual address space +configuration is made part of a vCPU context. + +For S-EL0 partitions with VHE enabled, a single secure EL2&0 Stage-1 translation +regime is used for both Hafnium and the partition. + +Schedule modes and SP Call chains +--------------------------------- + +An SP execution context is said to be in SPMC scheduled mode if CPU cycles are +allocated to it by SPMC. Correspondingly, an SP execution context is said to be +in Normal world scheduled mode if CPU cycles are allocated by the normal world. + +A call chain represents all SPs in a sequence of invocations of a direct message +request. When execution on a PE is in the secure state, only a single call chain +that runs in the Normal World scheduled mode can exist. FF-A v1.1 spec allows +any number of call chains to run in the SPMC scheduled mode but the Hafnium +SPMC restricts the number of call chains in SPMC scheduled mode to only one for +keeping the implementation simple. + +Partition runtime models +------------------------ + +The runtime model of an endpoint describes the transitions permitted for an +execution context between various states. These are the four partition runtime +models supported (refer to `[1]`_ section 7): + + - RTM_FFA_RUN: runtime model presented to an execution context that is + allocated CPU cycles through FFA_RUN interface. + - RTM_FFA_DIR_REQ: runtime model presented to an execution context that is + allocated CPU cycles through FFA_MSG_SEND_DIRECT_REQ interface. + - RTM_SEC_INTERRUPT: runtime model presented to an execution context that is + allocated CPU cycles by SPMC to handle a secure interrupt. + - RTM_SP_INIT: runtime model presented to an execution context that is + allocated CPU cycles by SPMC to initialize its state. + +If an endpoint execution context attempts to make an invalid transition or a +valid transition that could lead to a loop in the call chain, SPMC denies the +transition with the help of above runtime models. + +Interrupt management +-------------------- + +GIC ownership +~~~~~~~~~~~~~ + +The SPMC owns the GIC configuration. Secure and non-secure interrupts are +trapped at S-EL2. The SPMC manages interrupt resources and allocates interrupt +IDs based on SP manifests. The SPMC acknowledges physical interrupts and injects +virtual interrupts by setting the use of vIRQ/vFIQ bits before resuming a SP. + +Abbreviations: + + - NS-Int: A non-secure physical interrupt. It requires a switch to the normal + world to be handled if it triggers while execution is in secure world. + - Other S-Int: A secure physical interrupt targeted to an SP different from + the one that is currently running. + - Self S-Int: A secure physical interrupt targeted to the SP that is currently + running. + +Non-secure interrupt handling +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +This section documents the actions supported in SPMC in response to a non-secure +interrupt as per the guidance provided by FF-A v1.1 EAC0 specification. +An SP specifies one of the following actions in its partition manifest: + + - Non-secure interrupt is signaled. + - Non-secure interrupt is signaled after a managed exit. + - Non-secure interrupt is queued. + +An SP execution context in a call chain could specify a less permissive action +than subsequent SP execution contexts in the same call chain. The less +permissive action takes precedence over the more permissive actions specified +by the subsequent execution contexts. Please refer to FF-A v1.1 EAC0 section +8.3.1 for further explanation. + +Secure interrupt handling +~~~~~~~~~~~~~~~~~~~~~~~~~ + +This section documents the support implemented for secure interrupt handling in +SPMC as per the guidance provided by FF-A v1.1 EAC0 specification. +The following assumptions are made about the system configuration: + + - In the current implementation, S-EL1 SPs are expected to use the para + virtualized ABIs for interrupt management rather than accessing the virtual + GIC interface. + - Unless explicitly stated otherwise, this support is applicable only for + S-EL1 SPs managed by SPMC. + - Secure interrupts are configured as G1S or G0 interrupts. + - All physical interrupts are routed to SPMC when running a secure partition + execution context. + - All endpoints with multiple execution contexts have their contexts pinned + to corresponding CPUs. Hence, a secure virtual interrupt cannot be signaled + to a target vCPU that is currently running or blocked on a different + physical CPU. + +A physical secure interrupt could trigger while CPU is executing in normal world +or secure world. +The action of SPMC for a secure interrupt depends on: the state of the target +execution context of the SP that is responsible for handling the interrupt; +whether the interrupt triggered while execution was in normal world or secure +world. + +Secure interrupt signaling mechanisms +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Signaling refers to the mechanisms used by SPMC to indicate to the SP execution +context that it has a pending virtual interrupt and to further run the SP +execution context, such that it can handle the virtual interrupt. SPMC uses +either the FFA_INTERRUPT interface with ERET conduit or vIRQ signal for signaling +to S-EL1 SPs. When normal world execution is preempted by a secure interrupt, +the SPMD uses the FFA_INTERRUPT ABI with ERET conduit to signal interrupt to SPMC +running in S-EL2. + ++-----------+---------+---------------+---------------------------------------+ +| SP State | Conduit | Interface and | Description | +| | | parameters | | ++-----------+---------+---------------+---------------------------------------+ +| WAITING | ERET, | FFA_INTERRUPT,| SPMC signals to SP the ID of pending | +| | vIRQ | Interrupt ID | interrupt. It pends vIRQ signal and | +| | | | resumes execution context of SP | +| | | | through ERET. | ++-----------+---------+---------------+---------------------------------------+ +| BLOCKED | ERET, | FFA_INTERRUPT | SPMC signals to SP that an interrupt | +| | vIRQ | | is pending. It pends vIRQ signal and | +| | | | resumes execution context of SP | +| | | | through ERET. | ++-----------+---------+---------------+---------------------------------------+ +| PREEMPTED | vIRQ | NA | SPMC pends the vIRQ signal but does | +| | | | not resume execution context of SP. | ++-----------+---------+---------------+---------------------------------------+ +| RUNNING | ERET, | NA | SPMC pends the vIRQ signal and resumes| +| | vIRQ | | execution context of SP through ERET. | ++-----------+---------+---------------+---------------------------------------+ + +Secure interrupt completion mechanisms +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +A SP signals secure interrupt handling completion to the SPMC through the +following mechanisms: + + - ``FFA_MSG_WAIT`` ABI if it was in WAITING state. + - ``FFA_RUN`` ABI if its was in BLOCKED state. + +This is a remnant of SPMC implementation based on the FF-A v1.0 specification. +In the current implementation, S-EL1 SPs use the para-virtualized HVC interface +implemented by SPMC to perform priority drop and interrupt deactivation (SPMC +configures EOImode = 0, i.e. priority drop and deactivation are done together). +The SPMC performs checks to deny the state transition upon invocation of +either FFA_MSG_WAIT or FFA_RUN interface if the SP didn't perform the +deactivation of the secure virtual interrupt. + +If the current SP execution context was preempted by a secure interrupt to be +handled by execution context of target SP, SPMC resumes current SP after signal +completion by target SP execution context. + +Actions for a secure interrupt triggered while execution is in normal world +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + ++-------------------+----------+-----------------------------------------------+ +| State of target | Action | Description | +| execution context | | | ++-------------------+----------+-----------------------------------------------+ +| WAITING | Signaled | This starts a new call chain in SPMC scheduled| +| | | mode. | ++-------------------+----------+-----------------------------------------------+ +| PREEMPTED | Queued | The target execution must have been preempted | +| | | by a non-secure interrupt. SPMC queues the | +| | | secure virtual interrupt now. It is signaled | +| | | when the target execution context next enters | +| | | the RUNNING state. | ++-------------------+----------+-----------------------------------------------+ +| BLOCKED, RUNNING | NA | The target execution context is blocked or | +| | | running on a different CPU. This is not | +| | | supported by current SPMC implementation and | +| | | execution hits panic. | ++-------------------+----------+-----------------------------------------------+ + +If normal world execution was preempted by a secure interrupt, SPMC uses +FFA_NORMAL_WORLD_RESUME ABI to indicate completion of secure interrupt handling +and further returns execution to normal world. + +The following figure describes interrupt handling flow when a secure interrupt +triggers while execution is in normal world: + +.. image:: ../resources/diagrams/ffa-secure-interrupt-handling-nwd.png + +A brief description of the events: + + - 1) Secure interrupt triggers while normal world is running. + - 2) FIQ gets trapped to EL3. + - 3) SPMD signals secure interrupt to SPMC at S-EL2 using FFA_INTERRUPT ABI. + - 4) SPMC identifies target vCPU of SP and injects virtual interrupt (pends + vIRQ). + - 5) Assuming SP1 vCPU is in WAITING state, SPMC signals virtual interrupt + using FFA_INTERRUPT with interrupt id as an argument and resumes the SP1 + vCPU using ERET in SPMC scheduled mode. + - 6) Execution traps to vIRQ handler in SP1 provided that the virtual + interrupt is not masked i.e., PSTATE.I = 0 + - 7) SP1 queries for the pending virtual interrupt id using a paravirtualized + HVC call. SPMC clears the pending virtual interrupt state management + and returns the pending virtual interrupt id. + - 8) SP1 services the virtual interrupt and invokes the paravirtualized + de-activation HVC call. SPMC de-activates the physical interrupt, + clears the fields tracking the secure interrupt and resumes SP1 vCPU. + - 9) SP1 performs secure interrupt completion through FFA_MSG_WAIT ABI. + - 10) SPMC returns control to EL3 using FFA_NORMAL_WORLD_RESUME. + - 11) EL3 resumes normal world execution. + +Actions for a secure interrupt triggered while execution is in secure world +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + ++-------------------+----------+------------------------------------------------+ +| State of target | Action | Description | +| execution context | | | ++-------------------+----------+------------------------------------------------+ +| WAITING | Signaled | This starts a new call chain in SPMC scheduled | +| | | mode. | ++-------------------+----------+------------------------------------------------+ +| PREEMPTED by Self | Signaled | The target execution context reenters the | +| S-Int | | RUNNING state to handle the secure virtual | +| | | interrupt. | ++-------------------+----------+------------------------------------------------+ +| PREEMPTED by | Queued | SPMC queues the secure virtual interrupt now. | +| NS-Int | | It is signaled when the target execution | +| | | context next enters the RUNNING state. | ++-------------------+----------+------------------------------------------------+ +| BLOCKED | Signaled | Both preempted and target execution contexts | +| | | must have been part of the Normal world | +| | | scheduled call chain. Refer scenario 1 of | +| | | Table 8.4 in the FF-A v1.1 EAC0 spec. | ++-------------------+----------+------------------------------------------------+ +| RUNNING | NA | The target execution context is running on a | +| | | different CPU. This scenario is not supported | +| | | by current SPMC implementation and execution | +| | | hits panic. | ++-------------------+----------+------------------------------------------------+ + +The following figure describes interrupt handling flow when a secure interrupt +triggers while execution is in secure world. We assume OS kernel sends a direct +request message to SP1. Further, SP1 sends a direct request message to SP2. SP1 +enters BLOCKED state and SPMC resumes SP2. + +.. image:: ../resources/diagrams/ffa-secure-interrupt-handling-swd.png + +A brief description of the events: + + - 1) Secure interrupt triggers while SP2 is running. + - 2) SP2 gets preempted and execution traps to SPMC as IRQ. + - 3) SPMC finds the target vCPU of secure partition responsible for handling + this secure interrupt. In this scenario, it is SP1. + - 4) SPMC pends vIRQ for SP1 and signals through FFA_INTERRUPT interface. + SPMC further resumes SP1 through ERET conduit. Note that SP1 remains in + Normal world schedule mode. + - 6) Execution traps to vIRQ handler in SP1 provided that the virtual + interrupt is not masked i.e., PSTATE.I = 0 + - 7) SP1 queries for the pending virtual interrupt id using a paravirtualized + HVC call. SPMC clears the pending virtual interrupt state management + and returns the pending virtual interrupt id. + - 8) SP1 services the virtual interrupt and invokes the paravirtualized + de-activation HVC call. SPMC de-activates the physical interrupt and + clears the fields tracking the secure interrupt and resumes SP1 vCPU. + - 9) Since SP1 direct request completed with FFA_INTERRUPT, it resumes the + direct request to SP2 by invoking FFA_RUN. + - 9) SPMC resumes the pre-empted vCPU of SP2. + +EL3 interrupt handling +~~~~~~~~~~~~~~~~~~~~~~ + +In GICv3 based systems, EL3 interrupts are configured as Group0 secure +interrupts. Execution traps to SPMC when a Group0 interrupt triggers while an +SP is running. Further, SPMC running at S-EL2 uses FFA_EL3_INTR_HANDLE ABI to +request EL3 platform firmware to handle a pending Group0 interrupt. +Similarly, SPMD registers a handler with interrupt management framework to +delegate handling of Group0 interrupt to the platform if the interrupt triggers +in normal world. + + - Platform hook + + - plat_spmd_handle_group0_interrupt + + SPMD provides platform hook to handle Group0 secure interrupts. In the + current design, SPMD expects the platform not to delegate handling to the + NWd (such as through SDEI) while processing Group0 interrupts. + +Power management +---------------- + +In platforms with or without secure virtualization: + +- The NWd owns the platform PM policy. +- The Hypervisor or OS kernel is the component initiating PSCI service calls. +- The EL3 PSCI library is in charge of the PM coordination and control + (eventually writing to platform registers). +- While coordinating PM events, the PSCI library calls backs into the Secure + Payload Dispatcher for events the latter has statically registered to. + +When using the SPMD as a Secure Payload Dispatcher: + +- A power management event is relayed through the SPD hook to the SPMC. +- In the current implementation only cpu on (svc_on_finish) and cpu off + (svc_off) hooks are registered. +- The behavior for the cpu on event is described in `Secondary cores boot-up`_. + The SPMC is entered through its secondary physical core entry point. +- The cpu off event occurs when the NWd calls PSCI_CPU_OFF. The PM event is + signaled to the SPMC through a power management framework message. + It consists in a SPMD-to-SPMC direct request/response (`SPMC-SPMD direct + requests/responses`_) conveying the event details and SPMC response. + The SPMD performs a synchronous entry into the SPMC. The SPMC is entered and + updates its internal state to reflect the physical core is being turned off. + In the current implementation no SP is resumed as a consequence. This behavior + ensures a minimal support for CPU hotplug e.g. when initiated by the NWd linux + userspace. + +Arm architecture extensions for security hardening +================================================== + +Hafnium supports the following architecture extensions for security hardening: + +- Pointer authentication (FEAT_PAuth): the extension permits detection of forged + pointers used by ROP type of attacks through the signing of the pointer + value. Hafnium is built with the compiler branch protection option to permit + generation of a pointer authentication code for return addresses (pointer + authentication for instructions). The APIA key is used while Hafnium runs. + A random key is generated at boot time and restored upon entry into Hafnium + at run-time. APIA and other keys (APIB, APDA, APDB, APGA) are saved/restored + in vCPU contexts permitting to enable pointer authentication in VMs/SPs. +- Branch Target Identification (FEAT_BTI): the extension permits detection of + unexpected indirect branches used by JOP type of attacks. Hafnium is built + with the compiler branch protection option, inserting land pads at function + prologues that are reached by indirect branch instructions (BR/BLR). + Hafnium code pages are marked as guarded in the EL2 Stage-1 MMU descriptors + such that an indirect branch must always target a landpad. A fault is + triggered otherwise. VMs/SPs can (independently) mark their code pages as + guarded in the EL1&0 Stage-1 translation regime. +- Memory Tagging Extension (FEAT_MTE): the option permits detection of out of + bound memory array accesses or re-use of an already freed memory region. + Hafnium enables the compiler option permitting to leverage MTE stack tagging + applied to core stacks. Core stacks are marked as normal tagged memory in the + EL2 Stage-1 translation regime. A synchronous data abort is generated upon tag + check failure on load/stores. A random seed is generated at boot time and + restored upon entry into Hafnium. MTE system registers are saved/restored in + vCPU contexts permitting MTE usage from VMs/SPs. + +SMMUv3 support in Hafnium +========================= + +An SMMU is analogous to an MMU in a CPU. It performs address translations for +Direct Memory Access (DMA) requests from system I/O devices. +The responsibilities of an SMMU include: + +- Translation: Incoming DMA requests are translated from bus address space to + system physical address space using translation tables compliant to + Armv8/Armv7 VMSA descriptor format. +- Protection: An I/O device can be prohibited from read, write access to a + memory region or allowed. +- Isolation: Traffic from each individial device can be independently managed. + The devices are differentiated from each other using unique translation + tables. + +The following diagram illustrates a typical SMMU IP integrated in a SoC with +several I/O devices along with Interconnect and Memory system. + +.. image:: ../resources/diagrams/MMU-600.png + +SMMU has several versions including SMMUv1, SMMUv2 and SMMUv3. Hafnium provides +support for SMMUv3 driver in both normal and secure world. A brief introduction +of SMMUv3 functionality and the corresponding software support in Hafnium is +provided here. + +SMMUv3 features +--------------- + +- SMMUv3 provides Stage1, Stage2 translation as well as nested (Stage1 + Stage2) + translation support. It can either bypass or abort incoming translations as + well. +- Traffic (memory transactions) from each upstream I/O peripheral device, + referred to as Stream, can be independently managed using a combination of + several memory based configuration structures. This allows the SMMUv3 to + support a large number of streams with each stream assigned to a unique + translation context. +- Support for Armv8.1 VMSA where the SMMU shares the translation tables with + a Processing Element. AArch32(LPAE) and AArch64 translation table format + are supported by SMMUv3. +- SMMUv3 offers non-secure stream support with secure stream support being + optional. Logically, SMMUv3 behaves as if there is an indepdendent SMMU + instance for secure and non-secure stream support. +- It also supports sub-streams to differentiate traffic from a virtualized + peripheral associated with a VM/SP. +- Additionally, SMMUv3.2 provides support for PEs implementing Armv8.4-A + extensions. Consequently, SPM depends on Secure EL2 support in SMMUv3.2 + for providing Secure Stage2 translation support to upstream peripheral + devices. + +SMMUv3 Programming Interfaces +----------------------------- + +SMMUv3 has three software interfaces that are used by the Hafnium driver to +configure the behaviour of SMMUv3 and manage the streams. + +- Memory based data strutures that provide unique translation context for + each stream. +- Memory based circular buffers for command queue and event queue. +- A large number of SMMU configuration registers that are memory mapped during + boot time by Hafnium driver. Except a few registers, all configuration + registers have independent secure and non-secure versions to configure the + behaviour of SMMUv3 for translation of secure and non-secure streams + respectively. + +Peripheral device manifest +-------------------------- + +Currently, SMMUv3 driver in Hafnium only supports dependent peripheral devices. +These devices are dependent on PE endpoint to initiate and receive memory +management transactions on their behalf. The acccess to the MMIO regions of +any such device is assigned to the endpoint during boot. Moreover, SMMUv3 driver +uses the same stage 2 translations for the device as those used by partition +manager on behalf of the PE endpoint. This ensures that the peripheral device +has the same visibility of the physical address space as the endpoint. The +device node of the corresponding partition manifest (refer to `[1]`_ section 3.2 +) must specify these additional properties for each peripheral device in the +system : + +- smmu-id: This field helps to identify the SMMU instance that this device is + upstream of. +- stream-ids: List of stream IDs assigned to this device. + +.. code:: shell + + smmuv3-testengine { + base-address = <0x00000000 0x2bfe0000>; + pages-count = <32>; + attributes = <0x3>; + smmu-id = <0>; + stream-ids = <0x0 0x1>; + interrupts = <0x2 0x3>, <0x4 0x5>; + exclusive-access; + }; + +SMMUv3 driver limitations +------------------------- + +The primary design goal for the Hafnium SMMU driver is to support secure +streams. + +- Currently, the driver only supports Stage2 translations. No support for + Stage1 or nested translations. +- Supports only AArch64 translation format. +- No support for features such as PCI Express (PASIDs, ATS, PRI), MSI, RAS, + Fault handling, Performance Monitor Extensions, Event Handling, MPAM. +- No support for independent peripheral devices. + +S-EL0 Partition support +======================= +The SPMC (Hafnium) has limited capability to run S-EL0 FF-A partitions using +FEAT_VHE (mandatory with ARMv8.1 in non-secure state, and in secure world +with ARMv8.4 and FEAT_SEL2). + +S-EL0 partitions are useful for simple partitions that don't require full +Trusted OS functionality. It is also useful to reduce jitter and cycle +stealing from normal world since they are more lightweight than VMs. + +S-EL0 partitions are presented, loaded and initialized the same as S-EL1 VMs by +the SPMC. They are differentiated primarily by the 'exception-level' property +and the 'execution-ctx-count' property in the SP manifest. They are host apps +under the single EL2&0 Stage-1 translation regime controlled by the SPMC and +call into the SPMC through SVCs as opposed to HVCs and SMCs. These partitions +can use FF-A defined services (FFA_MEM_PERM_*) to update or change permissions +for memory regions. + +S-EL0 partitions are required by the FF-A specification to be UP endpoints, +capable of migrating, and the SPMC enforces this requirement. The SPMC allows +a S-EL0 partition to accept a direct message from secure world and normal world, +and generate direct responses to them. +All S-EL0 partitions must use AArch64. AArch32 S-EL0 partitions are not supported. + +Memory sharing, indirect messaging, and notifications functionality with S-EL0 +partitions is supported. + +Interrupt handling is not supported with S-EL0 partitions and is work in +progress. + +References +========== + +.. _[1]: + +[1] `Arm Firmware Framework for Arm A-profile `__ + +.. _[2]: + +[2] :ref:`Secure Partition Manager using MM interface` + +.. _[3]: + +[3] `Trusted Boot Board Requirements +Client `__ + +.. _[4]: + +[4] https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/tree/lib/el3_runtime/aarch64/context.S#n45 + +.. _[5]: + +[5] https://git.trustedfirmware.org/TF-A/tf-a-tests.git/tree/spm/cactus/plat/arm/fvp/fdts/cactus.dts + +.. _[6]: + +[6] https://trustedfirmware-a.readthedocs.io/en/latest/components/ffa-manifest-binding.html + +.. _[7]: + +[7] https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/tree/plat/arm/board/fvp/fdts/fvp_spmc_manifest.dts + +.. _[8]: + +[8] https://lists.trustedfirmware.org/archives/list/tf-a@lists.trustedfirmware.org/thread/CFQFGU6H2D5GZYMUYGTGUSXIU3OYZP6U/ + +.. _[9]: + +[9] https://trustedfirmware-a.readthedocs.io/en/latest/design/firmware-design.html#dynamic-configuration-during-cold-boot + +-------------- + +*Copyright (c) 2020-2023, Arm Limited and Contributors. All rights reserved.* -- cgit v1.2.3