From be58c81aff4cd4c0ccf43dbd7998da4a6a08c03b Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 21 Apr 2024 19:43:51 +0200 Subject: Adding upstream version 2.10.0+dfsg. Signed-off-by: Daniel Baumann --- drivers/brcm/chimp.c | 398 +++++++++ drivers/brcm/emmc/emmc_chal_sd.c | 1017 +++++++++++++++++++++++ drivers/brcm/emmc/emmc_csl_sdcard.c | 1090 +++++++++++++++++++++++++ drivers/brcm/emmc/emmc_csl_sdcmd.c | 842 +++++++++++++++++++ drivers/brcm/emmc/emmc_pboot_hal_memory_drv.c | 631 ++++++++++++++ drivers/brcm/i2c/i2c.c | 886 ++++++++++++++++++++ drivers/brcm/iproc_gpio.c | 232 ++++++ drivers/brcm/mdio/mdio.c | 87 ++ drivers/brcm/ocotp.c | 204 +++++ drivers/brcm/rng.c | 97 +++ drivers/brcm/scp.c | 100 +++ drivers/brcm/sotp.c | 323 ++++++++ drivers/brcm/spi/iproc_qspi.c | 317 +++++++ drivers/brcm/spi/iproc_qspi.h | 107 +++ drivers/brcm/spi/iproc_spi.c | 31 + drivers/brcm/spi_flash.c | 308 +++++++ drivers/brcm/spi_sf.c | 60 ++ 17 files changed, 6730 insertions(+) create mode 100644 drivers/brcm/chimp.c create mode 100644 drivers/brcm/emmc/emmc_chal_sd.c create mode 100644 drivers/brcm/emmc/emmc_csl_sdcard.c create mode 100644 drivers/brcm/emmc/emmc_csl_sdcmd.c create mode 100644 drivers/brcm/emmc/emmc_pboot_hal_memory_drv.c create mode 100644 drivers/brcm/i2c/i2c.c create mode 100644 drivers/brcm/iproc_gpio.c create mode 100644 drivers/brcm/mdio/mdio.c create mode 100644 drivers/brcm/ocotp.c create mode 100644 drivers/brcm/rng.c create mode 100644 drivers/brcm/scp.c create mode 100644 drivers/brcm/sotp.c create mode 100644 drivers/brcm/spi/iproc_qspi.c create mode 100644 drivers/brcm/spi/iproc_qspi.h create mode 100644 drivers/brcm/spi/iproc_spi.c create mode 100644 drivers/brcm/spi_flash.c create mode 100644 drivers/brcm/spi_sf.c (limited to 'drivers/brcm') diff --git a/drivers/brcm/chimp.c b/drivers/brcm/chimp.c new file mode 100644 index 0000000..81767bb --- /dev/null +++ b/drivers/brcm/chimp.c @@ -0,0 +1,398 @@ +/* + * Copyright (c) 2016 - 2020, Broadcom + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include + +#include + +#include +#include + +#define CHIMP_DEFAULT_STARTUP_ADDR 0xb4300000 + +/* ChiMP's view of APE scratchpad memory for fastboot */ +#define CHIMP_FASTBOOT_ADDR 0x61000000 + +#define CHIMP_PREPARE_ACCESS_WINDOW(addr) \ + (\ + mmio_write_32(\ + NIC400_NITRO_CHIMP_S_IDM_IO_CONTROL_DIRECT, \ + addr & 0xffc00000)\ + ) +#define CHIMP_INDIRECT_TGT_ADDR(addr) \ + (CHIMP_INDIRECT_BASE + (addr & CHIMP_INDIRECT_ADDR_MASK)) + +#define CHIMP_CTRL_ADDR(x) (CHIMP_REG_CTRL_BASE + x) + +/* For non-PAXC builds */ +#ifndef CHIMP_FB1_ENTRY +#define CHIMP_FB1_ENTRY 0 +#endif + +#define CHIMP_DBG VERBOSE + +void bcm_chimp_write(uintptr_t addr, uint32_t value) +{ + CHIMP_PREPARE_ACCESS_WINDOW(addr); + mmio_write_32(CHIMP_INDIRECT_TGT_ADDR(addr), value); +} + +uint32_t bcm_chimp_read(uintptr_t addr) +{ + CHIMP_PREPARE_ACCESS_WINDOW(addr); + return mmio_read_32(CHIMP_INDIRECT_TGT_ADDR(addr)); +} + +void bcm_chimp_clrbits(uintptr_t addr, uint32_t bits) +{ + CHIMP_PREPARE_ACCESS_WINDOW(addr); + mmio_clrbits_32(CHIMP_INDIRECT_TGT_ADDR(addr), bits); +} + +void bcm_chimp_setbits(uintptr_t addr, uint32_t bits) +{ + CHIMP_PREPARE_ACCESS_WINDOW(addr); + mmio_setbits_32(CHIMP_INDIRECT_TGT_ADDR(addr), bits); +} + +int bcm_chimp_is_nic_mode(void) +{ + uint32_t val; + + /* Check if ChiMP straps are set */ + val = mmio_read_32(CDRU_CHIP_STRAP_DATA_LSW); + val &= CDRU_CHIP_STRAP_DATA_LSW__NIC_MODE_MASK; + + return val == CDRU_CHIP_STRAP_DATA_LSW__NIC_MODE_MASK; +} + +void bcm_chimp_fru_prog_done(bool is_done) +{ + uint32_t val; + + val = is_done ? (1 << CHIMP_FRU_PROG_DONE_BIT) : 0; + bcm_chimp_setbits(CHIMP_REG_ECO_RESERVED, val); +} + +int bcm_chimp_handshake_done(void) +{ + uint32_t value; + + value = bcm_chimp_read(CHIMP_REG_ECO_RESERVED); + value &= (1 << CHIMP_FLASH_ACCESS_DONE_BIT); + + return value != 0; +} + +int bcm_chimp_wait_handshake(void) +{ + uint32_t timeout = CHIMP_HANDSHAKE_TIMEOUT_MS; + uint32_t status; + + INFO("Waiting for ChiMP handshake...\n"); + do { + if (bcm_chimp_handshake_done()) + break; + /* No need to wait if ChiMP reported an error */ + status = bcm_chimp_read_ctrl(CHIMP_REG_CTRL_BPE_STAT_REG); + if (status & CHIMP_ERROR_MASK) { + ERROR("ChiMP error 0x%x. Wait aborted\n", status); + break; + } + mdelay(1); + } while (--timeout); + + if (!bcm_chimp_handshake_done()) { + if (timeout == 0) { + WARN("Timeout waiting for ChiMP handshake\n"); + } + } else { + INFO("Got handshake from ChiMP!\n"); + } + + return bcm_chimp_handshake_done(); +} + +uint32_t bcm_chimp_read_ctrl(uint32_t offset) +{ + return bcm_chimp_read(CHIMP_CTRL_ADDR(offset)); +} + +static int bcm_chimp_nitro_reset(void) +{ + uint32_t timeout; + + /* Perform tasks done by M0 in NIC mode */ + CHIMP_DBG("Taking Nitro out of reset\n"); + mmio_setbits_32(CDRU_MISC_RESET_CONTROL, + /* MHB_RESET_N */ + (1 << CDRU_MISC_RESET_CONTROL__CDRU_MHB_RESET_N_R) | + /* PCI_RESET_N */ + (1 << CDRU_MISC_RESET_CONTROL__CDRU_PCIE_RESET_N_R) | + /* PM_RESET_N */ + (1 << CDRU_MISC_RESET_CONTROL__CDRU_PM_RESET_N_R) | + /* NIC_RESET_N */ + (1 << CDRU_MISC_RESET_CONTROL__CDRU_NITRO_RESET_N_R) + ); + + /* Wait until Nitro is out of reset */ + timeout = NIC_RESET_RELEASE_TIMEOUT_US; + do { + uint32_t value; + + value = bcm_chimp_read_ctrl(CHIMP_REG_CTRL_BPE_MODE_REG); + if ((value & CHIMP_BPE_MODE_ID_MASK) == + CHIMP_BPE_MODE_ID_PATTERN) + break; + udelay(1); + } while (--timeout); + + if (timeout == 0) { + ERROR("NIC reset release timed out\n"); + return -1; + } + + return 0; +} + +static void bcm_nitro_secure_mode_enable(void) +{ + mmio_setbits_32(CDRU_NITRO_CONTROL, + (1 << CDRU_NITRO_CONTROL__CDRU_NITRO_SEC_MODE_R) | + (1 << CDRU_NITRO_CONTROL__CDRU_NITRO_SEC_OVERRIDE_R)); + mmio_write_32(NITRO_TZPC_TZPCDECPROT0clr, + /* NITRO_TZPC */ + 1 << NITRO_TZPC_TZPCDECPROT0clr__DECPROT0_chimp_m_clr_R); +} + +static int bcm_chimp_reset_and_initial_setup(void) +{ + + int err; + uint32_t handshake_reg; + + err = bcm_chimp_nitro_reset(); + if (err) + return err; + + /* Enable Nitro secure mode */ + bcm_nitro_secure_mode_enable(); + + /* Force ChiMP back into reset */ + bcm_chimp_setbits(CHIMP_CTRL_ADDR(CHIMP_REG_CTRL_BPE_MODE_REG), + 1 << CHIMP_REG_CHIMP_REG_CTRL_BPE_MODE_REG__cm3_rst_R); + + handshake_reg = (1 << SR_IN_SMARTNIC_MODE_BIT); + + /* Get OTP secure Chimp boot status */ + if (mmio_read_32(CRMU_OTP_STATUS) & (1 << CRMU_OTP_STATUS_BIT)) + handshake_reg |= (1 << SR_CHIMP_SECURE_BOOT_BIT); + + bcm_chimp_write(CHIMP_REG_ECO_RESERVED, handshake_reg); + + CHIMP_DBG("ChiMP reset and initial handshake parameters set\n"); + + return 0; +} + +static void bcm_nitro_chimp_release_reset(void) +{ + bcm_chimp_clrbits(CHIMP_CTRL_ADDR(CHIMP_REG_CTRL_BPE_MODE_REG), + 1 << CHIMP_REG_CHIMP_REG_CTRL_BPE_MODE_REG__cm3_rst_R); + + CHIMP_DBG("Nitro Reset Released\n"); +} + +static void bcm_chimp_set_fastboot(int mode) +{ + uint32_t fb_entry; + + /* 1. Enable fastboot */ + bcm_chimp_setbits(CHIMP_CTRL_ADDR(CHIMP_REG_CTRL_BPE_MODE_REG), + (1 << CHIMP_FAST_BOOT_MODE_BIT)); + fb_entry = CHIMP_FASTBOOT_ADDR | mode; + if (mode == CHIMP_FASTBOOT_JUMP_IN_PLACE) + fb_entry = CHIMP_FB1_ENTRY; + /* 2. Write startup address and mode */ + INFO("Setting fastboot type %d entry to 0x%x\n", mode, fb_entry); + bcm_chimp_write( + CHIMP_CTRL_ADDR(CHIMP_REG_CTRL_FSTBOOT_PTR_REG), + fb_entry); +} + +#ifndef CHIMPFW_USE_SIDELOAD +static void bcm_chimp_load_fw_from_spi(uintptr_t spi_addr, size_t size) +{ + uintptr_t ape_scpad; + uintptr_t dest; + size_t bytes_left; + + ape_scpad = CHIMP_REG_CHIMP_APE_SCPAD; + dest = CHIMP_INDIRECT_TGT_ADDR(CHIMP_REG_CHIMP_APE_SCPAD); + bytes_left = size; + + while (bytes_left) { + uint32_t delta; + + delta = bytes_left > CHIMP_WINDOW_SIZE ? + bytes_left - CHIMP_WINDOW_SIZE : bytes_left; + CHIMP_PREPARE_ACCESS_WINDOW(ape_scpad); + INFO("Transferring %d byte(s) from 0x%lx to 0x%lx\n", + delta, spi_addr, dest); + /* + * This single memcpy call takes significant amount of time + * on Palladium. Be patient + */ + memcpy((void *)dest, (void *)spi_addr, delta); + bytes_left -= delta; + INFO("Transferred %d byte(s) from 0x%lx to 0x%lx (%lu%%)\n", + delta, spi_addr, dest, + ((size - bytes_left) * 100)/size); + spi_addr += delta; + dest += delta; + ape_scpad += delta; + } +} + +static int bcm_chimp_find_fw_in_spi(uintptr_t *addr, size_t *size) +{ + int i; + bnxnvm_master_block_header_t *master_block_hdr; + bnxnvm_directory_block_header_t *dir_block_hdr; + bnxnvm_directory_entry_t *dir_entry; + int found; + + found = 0; + + /* Read the master block */ + master_block_hdr = + (bnxnvm_master_block_header_t *)(uintptr_t)QSPI_BASE_ADDR; + if (master_block_hdr->sig != BNXNVM_MASTER_BLOCK_SIG) { + WARN("Invalid masterblock 0x%x (expected 0x%x)\n", + master_block_hdr->sig, + BNXNVM_MASTER_BLOCK_SIG); + return -NV_NOT_NVRAM; + } + if ((master_block_hdr->block_size > NV_MAX_BLOCK_SIZE) || + (master_block_hdr->directory_offset >= + master_block_hdr->nvram_size)) { + WARN("Invalid masterblock block size 0x%x or directory offset 0x%x\n", + master_block_hdr->block_size, + master_block_hdr->directory_offset); + return -NV_BAD_MB; + } + + /* Skip to the Directory block start */ + dir_block_hdr = + (bnxnvm_directory_block_header_t *) + ((uintptr_t)QSPI_BASE_ADDR + + master_block_hdr->directory_offset); + if (dir_block_hdr->sig != BNXNVM_DIRECTORY_BLOCK_SIG) { + WARN("Invalid directory header 0x%x (expected 0x%x)\n", + dir_block_hdr->sig, + BNXNVM_DIRECTORY_BLOCK_SIG); + return -NV_BAD_DIR_HEADER; + } + + /* Locate the firmware */ + for (i = 0; i < dir_block_hdr->entries; i++) { + *addr = ((uintptr_t)dir_block_hdr + dir_block_hdr->length + + i * dir_block_hdr->entry_length); + dir_entry = (bnxnvm_directory_entry_t *)(*addr); + if ((dir_entry->type == BNX_DIR_TYPE_BOOTCODE) || + (dir_entry->type == BNX_DIR_TYPE_BOOTCODE_2)) { + found = 1; + break; + } + } + + if (!found) + return -NV_FW_NOT_FOUND; + + *addr = QSPI_BASE_ADDR + dir_entry->item_location; + *size = dir_entry->data_length; + + INFO("Found chimp firmware at 0x%lx, size %lu byte(s)\n", + *addr, *size); + + return NV_OK; +} +#endif + +int bcm_chimp_initiate_fastboot(int fastboot_type) +{ + int err; + + if ((fastboot_type != CHIMP_FASTBOOT_NITRO_RESET) && + (fastboot_type <= CHIMP_FASTBOOT_JUMP_DECOMPRESS)) { + CHIMP_DBG("Initiating ChiMP fastboot type %d\n", fastboot_type); + } + + /* + * If we are here, M0 did not setup Nitro because NIC mode + * strap was not present + */ + err = bcm_chimp_reset_and_initial_setup(); + if (err) + return err; + + if (fastboot_type > CHIMP_FASTBOOT_JUMP_DECOMPRESS) { + WARN("ChiMP setup deferred\n"); + return -1; + } + + if (fastboot_type != CHIMP_FASTBOOT_NITRO_RESET) { + + if ((fastboot_type == CHIMP_FASTBOOT_JUMP_IN_PLACE) && + (CHIMP_FB1_ENTRY == 0)) { + ERROR("Missing ESAL entry point for fastboot type 1.\n" + "Fastboot failed\n"); + return -1; + } + + /* + * TODO: We need to think of the way to load the ChiMP fw. + * This could be SPI, NAND, etc. + * For now we temporarily stick to the SPI load unless + * CHIMPFW_USE_SIDELOAD is defined. Note that for the SPI NVRAM + * image we need to parse directory and get the image. + * When we load image from other media there is no need to + * parse because fw image can be directly placed into the APE's + * scratchpad. + * For sideload method we simply reset the ChiMP, set bpe_reg + * to do fastboot with the type we define, and release from + * reset so that ROM loader would initiate fastboot immediately + */ +#ifndef CHIMPFW_USE_SIDELOAD + { + uintptr_t spi_addr; + size_t size; + + err = bcm_chimp_find_fw_in_spi(&spi_addr, &size); + if (!err) { + INFO("Loading ChiMP firmware, addr 0x%lx, size %lu byte(s)\n", + spi_addr, size); + bcm_chimp_load_fw_from_spi(spi_addr, size); + } else { + ERROR("Error %d ChiMP firmware not in NVRAM directory!\n", + err); + } + } +#else + INFO("Skip ChiMP QSPI fastboot type %d due to sideload requested\n", + fastboot_type); +#endif + if (!err) { + INFO("Instruct ChiMP to fastboot\n"); + bcm_chimp_set_fastboot(fastboot_type); + INFO("Fastboot mode set\n"); + } + } + + bcm_nitro_chimp_release_reset(); + + return err; +} diff --git a/drivers/brcm/emmc/emmc_chal_sd.c b/drivers/brcm/emmc/emmc_chal_sd.c new file mode 100644 index 0000000..5379ec1 --- /dev/null +++ b/drivers/brcm/emmc/emmc_chal_sd.c @@ -0,0 +1,1017 @@ +/* + * Copyright (c) 2016 - 2020, Broadcom + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include +#include + +#include + +#include + +#include "bcm_emmc.h" +#include "emmc_chal_types.h" +#include "emmc_chal_sd.h" +#include "emmc_pboot_hal_memory_drv.h" + +extern void emmc_soft_reset(void); + +#define SD_VDD_WINDOW_1_6_TO_1_7 0x00000010 // 1.6 V to 1.7 Volts +#define SD_VDD_WINDOW_1_7_TO_1_8 0x00000020 // 1.7 V to 1.8 Volts +#define SD_VDD_WINDOW_1_8_TO_1_9 0x00000040 // 1.8 V to 1.9 Volts +#define SD_VDD_WINDOW_1_9_TO_2_0 0x00000080 // 1.9 V to 2.0 Volts +#define SD_VDD_WINDOW_2_0_TO_2_1 0x00000100 // 2.0 V to 2.1 Volts +#define SD_VDD_WINDOW_2_1_TO_2_2 0x00000200 // 2.1 V to 2.2 Volts +#define SD_VDD_WINDOW_2_2_TO_2_3 0x00000400 // 2.2 V to 2.3 Volts +#define SD_VDD_WINDOW_2_3_TO_2_4 0x00000800 // 2.3 V to 2.4 Volts +#define SD_VDD_WINDOW_2_4_TO_2_5 0x00001000 // 2.4 V to 2.5 Volts +#define SD_VDD_WINDOW_2_5_TO_2_6 0x00002000 // 2.5 V to 2.6 Volts +#define SD_VDD_WINDOW_2_6_TO_2_7 0x00004000 // 2.6 V to 2.7 Volts +#define SD_VDD_WINDOW_2_7_TO_2_8 0x00008000 // 2.7 V to 2.8 Volts +#define SD_VDD_WINDOW_2_8_TO_2_9 0x00010000 // 2.8 V to 2.9 Volts +#define SD_VDD_WINDOW_2_9_TO_3_0 0x00020000 // 2.9 V to 3.0 Volts +#define SD_VDD_WINDOW_3_0_TO_3_1 0x00040000 // 3.0 V to 3.1 Volts +#define SD_VDD_WINDOW_3_1_TO_3_2 0x00080000 // 3.1 V to 3.2 Volts +#define SD_VDD_WINDOW_3_2_TO_3_3 0x00100000 // 3.2 V to 3.3 Volts +#define SD_VDD_WINDOW_3_3_TO_3_4 0x00200000 // 3.3 V to 3.4 Volts +#define SD_VDD_WINDOW_3_4_TO_3_5 0x00400000 // 3.4 V to 3.5 Volts +#define SD_VDD_WINDOW_3_5_TO_3_6 0x00800000 // 3.5 V to 3.6 Volts + +#define SD_VDD_WINDOW_1_6_TO_2_6 (SD_VDD_WINDOW_1_6_TO_1_7 | \ + SD_VDD_WINDOW_1_7_TO_1_8 | \ + SD_VDD_WINDOW_1_8_TO_1_9 | \ + SD_VDD_WINDOW_1_9_TO_2_0 | \ + SD_VDD_WINDOW_2_0_TO_2_1 | \ + SD_VDD_WINDOW_2_1_TO_2_2 | \ + SD_VDD_WINDOW_2_2_TO_2_3 | \ + SD_VDD_WINDOW_2_3_TO_2_4 | \ + SD_VDD_WINDOW_2_4_TO_2_5 | \ + SD_VDD_WINDOW_2_5_TO_2_6) + +#define SD_VDD_WINDOW_2_6_TO_3_2 (SD_VDD_WINDOW_2_6_TO_2_7 | \ + SD_VDD_WINDOW_2_7_TO_2_8 | \ + SD_VDD_WINDOW_2_8_TO_2_9 | \ + SD_VDD_WINDOW_2_9_TO_3_0 | \ + SD_VDD_WINDOW_3_0_TO_3_1 | \ + SD_VDD_WINDOW_3_1_TO_3_2) + +#define SD_VDD_WINDOW_3_2_TO_3_6 (SD_VDD_WINDOW_3_2_TO_3_3 | \ + SD_VDD_WINDOW_3_3_TO_3_4 | \ + SD_VDD_WINDOW_3_4_TO_3_5 | \ + SD_VDD_WINDOW_3_5_TO_3_6) + + +static int32_t chal_sd_set_power(struct sd_dev *handle, + uint32_t voltage, uint32_t state); + +static void chal_sd_set_dma_boundary(struct sd_dev *handle, uint32_t boundary); + +static int32_t chal_sd_setup_handler(struct sd_dev *handle, + uint32_t sdBbase, uint32_t hostBase); + +/* + * Configure host controller pwr settings, + * to match voltage requirements by SD Card + */ +static int32_t chal_sd_set_power(struct sd_dev *handle, + uint32_t voltage, uint32_t state) +{ + int32_t rc, rval = SD_FAIL; + uint32_t time = 0; + + if (handle == NULL) + return SD_INVALID_HANDLE; + + mmio_clrsetbits_32(handle->ctrl.sdRegBaseAddr + + SD4_EMMC_TOP_CTRL_OFFSET, + (SD4_EMMC_TOP_CTRL_SDVSELVDD1_MASK | + SD4_EMMC_TOP_CTRL_SDPWR_MASK), + (voltage << 9)); + + /* + * Long delay is required here in emulation. Without this, the initial + * commands sent to the eMMC card timeout. We don't know if this + * delay is necessary with silicon, leaving in for safety. + * It is observed that 403ms on emulation system and as per the clock + * calculations it is expected to complete with in 1ms on chip + */ + do { + rc = mmio_read_32(handle->ctrl.sdRegBaseAddr + + SD4_EMMC_TOP_INTR_OFFSET); + + if ((rc & SD4_EMMC_TOP_INTR_CRDINS_MASK) == + SD4_EMMC_TOP_INTR_CRDINS_MASK) + break; + + mdelay(1); + } while (time++ < EMMC_CARD_DETECT_TIMEOUT_MS); + + if (time >= EMMC_CARD_DETECT_TIMEOUT_MS) { + ERROR("EMMC: Card insert event detection timeout\n"); + return rval; + } + + VERBOSE("EMMC: Card detection delay: %dms\n", time); + + if (state) + mmio_setbits_32(handle->ctrl.sdRegBaseAddr + SD4_EMMC_TOP_CTRL_OFFSET, + SD4_EMMC_TOP_CTRL_SDPWR_MASK); + + /* dummy write & ack to verify if the sdio is ready to send commands */ + mmio_write_32(handle->ctrl.sdRegBaseAddr + SD4_EMMC_TOP_ARG_OFFSET, 0); + mmio_write_32(handle->ctrl.sdRegBaseAddr + SD4_EMMC_TOP_CMD_OFFSET, 0); + + /* + * 63ms observed on emulation system, As per clock calculations + * it will complete < 1ms on chip. + */ + time = 0; + do { + rc = mmio_read_32(handle->ctrl.sdRegBaseAddr + + SD4_EMMC_TOP_INTR_OFFSET); + + if (rc & SD4_EMMC_TOP_INTR_ERRIRQ_MASK) + break; + + if ((rc & SD4_EMMC_TOP_INTR_CMDDONE_MASK) == + SD4_EMMC_TOP_INTR_CMDDONE_MASK) + break; + + mdelay(1); + } while (time++ < EMMC_CMD_TIMEOUT_MS); + + if (time >= EMMC_CMD_TIMEOUT_MS) { + WARN("%s %d Initial dummy command timeout is happened\n", + __func__, __LINE__); + return rval; + } + + VERBOSE("EMMC: Dummy Command delay: %dms\n", time); + + return SD_OK; +} + +/* + * Configure DMA Boundaries + */ +static void chal_sd_set_dma_boundary(struct sd_dev *handle, uint32_t boundary) +{ + if (handle == NULL) + return; + + mmio_clrsetbits_32(handle->ctrl.sdRegBaseAddr + + SD4_EMMC_TOP_BLOCK_OFFSET, + SD4_EMMC_TOP_BLOCK_HSBS_MASK, boundary); +} + +static int32_t chal_sd_setup_handler(struct sd_dev *handle, uint32_t sdBase, + uint32_t hostBase) +{ + if (handle == NULL) + return SD_INVALID_HANDLE; + + handle->ctrl.sdRegBaseAddr = sdBase; + handle->ctrl.hostRegBaseAddr = hostBase; + handle->ctrl.present = 0; + handle->ctrl.rca = 0; + handle->ctrl.blkGapEnable = 0; + handle->ctrl.cmdStatus = 0; + + return SD_OK; +} + +/* + * Initialize SD Host controller + */ +int32_t chal_sd_init(CHAL_HANDLE *sd_handle) +{ + uint32_t cap_val_l = 0; + uint32_t ctl_val, voltage; + uint32_t timeout_val; + struct sd_dev *handle; + uint32_t reg_val; + int32_t rval = SD_FAIL; + + if (sd_handle == NULL) + return SD_INVALID_HANDLE; + + handle = (struct sd_dev *)sd_handle; + + /* + * Set SDIO Host Controller capabilities register + */ + EMMC_TRACE("Set Host Controller Capabilities register\n"); + + reg_val = 0; + reg_val |= (1 << ICFG_SDIO0_CAP0__SLOT_TYPE_R); + reg_val |= (0 << ICFG_SDIO0_CAP0__INT_MODE_R); + reg_val |= (0 << ICFG_SDIO0_CAP0__SYS_BUS_64BIT_R); + reg_val |= (1 << ICFG_SDIO0_CAP0__VOLTAGE_1P8V_R); + reg_val |= (1 << ICFG_SDIO0_CAP0__VOLTAGE_3P0V_R); + reg_val |= (1 << ICFG_SDIO0_CAP0__VOLTAGE_3P3V_R); + reg_val |= (1 << ICFG_SDIO0_CAP0__SUSPEND_RESUME_R); + reg_val |= (1 << ICFG_SDIO0_CAP0__SDMA_R); + reg_val |= (1 << ICFG_SDIO0_CAP0__HIGH_SPEED_R); + reg_val |= (1 << ICFG_SDIO0_CAP0__ADMA2_R); + reg_val |= (1 << ICFG_SDIO0_CAP0__EXTENDED_MEDIA_R); + reg_val |= (2 << ICFG_SDIO0_CAP0__MAX_BLOCK_LEN_R); + reg_val |= (0xd0 << ICFG_SDIO0_CAP0__BASE_CLK_FREQ_R); + reg_val |= (1 << ICFG_SDIO0_CAP0__TIMEOUT_UNIT_R); + reg_val |= (0x30 << ICFG_SDIO0_CAP0__TIMEOUT_CLK_FREQ_R); + + mmio_write_32(ICFG_SDIO0_CAP0, reg_val); + + reg_val = 0; + reg_val |= (1 << ICFG_SDIO0_CAP1__SPI_BLOCK_MODE_R); + reg_val |= (1 << ICFG_SDIO0_CAP1__SPI_MODE_R); + reg_val |= (0 << ICFG_SDIO0_CAP1__CLK_MULT_R); + reg_val |= (0 << ICFG_SDIO0_CAP1__RETUNING_MODE_R); + reg_val |= (1 << ICFG_SDIO0_CAP1__TUNE_SDR50_R); + reg_val |= (1 << ICFG_SDIO0_CAP1__TIME_RETUNE_R); + reg_val |= (1 << ICFG_SDIO0_CAP1__DRIVER_D_R); + reg_val |= (1 << ICFG_SDIO0_CAP1__DRIVER_C_R); + reg_val |= (1 << ICFG_SDIO0_CAP1__DRIVER_A_R); + reg_val |= (1 << ICFG_SDIO0_CAP1__DDR50_R); + reg_val |= (1 << ICFG_SDIO0_CAP1__SDR104_R); + reg_val |= (1 << ICFG_SDIO0_CAP1__SDR50_R); + + mmio_write_32(ICFG_SDIO0_CAP1, reg_val); + + /* Reset the SDIO controller */ + chal_sd_stop(); + + /* Turn on SD clock */ + chal_sd_set_clock(sd_handle, + chal_sd_freq_2_div_ctrl_setting(INIT_CLK_FREQ), 1); + + /* program data time out value to the max */ + timeout_val = SD_HOST_CORE_TIMEOUT; + + ctl_val = mmio_read_32(handle->ctrl.sdRegBaseAddr + + SD4_EMMC_TOP_CTRL1_OFFSET); + ctl_val |= ((timeout_val & 0xf) << SD4_EMMC_TOP_CTRL1_DTCNT_SHIFT); + + mmio_write_32(handle->ctrl.sdRegBaseAddr + SD4_EMMC_TOP_CTRL1_OFFSET, + ctl_val); + + /* enable all interrupt status */ + mmio_write_32(handle->ctrl.sdRegBaseAddr + SD4_EMMC_TOP_INTREN1_OFFSET, + 0); + mmio_write_32(handle->ctrl.sdRegBaseAddr + SD4_EMMC_TOP_INTREN2_OFFSET, + 0); + + SD_US_DELAY(100); + + mmio_write_32(handle->ctrl.sdRegBaseAddr + SD4_EMMC_TOP_INTREN1_OFFSET, + SD_NOR_INTERRUPTS | SD_ERR_INTERRUPTS); + mmio_write_32(handle->ctrl.sdRegBaseAddr + SD4_EMMC_TOP_INTREN2_OFFSET, + SD_NOR_INTERRUPTS | SD_ERR_INTERRUPTS); + + /* Select SD bus voltage */ + cap_val_l = mmio_read_32(handle->ctrl.sdRegBaseAddr + + SD4_EMMC_TOP_CAPABILITIES1_OFFSET); + handle->cfg.voltage = 0; + voltage = 0x7; + + if (cap_val_l & SD4_EMMC_TOP_CAPABILITIES1_V33_MASK) { + handle->cfg.voltage |= SD_VDD_WINDOW_3_3_TO_3_4; + voltage = 0x7; + } else if (cap_val_l & SD4_EMMC_TOP_CAPABILITIES1_V3_MASK) { + handle->cfg.voltage |= SD_VDD_WINDOW_3_0_TO_3_1; + voltage = 0x6; + } else if (cap_val_l & SD4_EMMC_TOP_CAPABILITIES1_V18_MASK) { + handle->cfg.voltage |= SD_VDD_WINDOW_1_8_TO_1_9; + voltage = 0x5; + } + + rval = chal_sd_set_power(handle, voltage, SD4_EMMC_TOP_CTRL_SDPWR_MASK); + + ctl_val = mmio_read_32(handle->ctrl.sdRegBaseAddr + + SD4_EMMC_TOP_HCVERSIRQ_OFFSET); + handle->ctrl.version = ((ctl_val >> 16) & 0xFF); + + return rval; +} + +void chal_sd_set_speed(CHAL_HANDLE *sd_handle, uint32_t speed) +{ + struct sd_dev *handle; + + if (sd_handle == NULL) + return; + + handle = (struct sd_dev *) sd_handle; + + if (speed) { + EMMC_TRACE("enable HighSpeed\n"); + mmio_setbits_32(handle->ctrl.sdRegBaseAddr + + SD4_EMMC_TOP_CTRL_OFFSET, + SD4_EMMC_TOP_CTRL_HSEN_MASK); + } else { + EMMC_TRACE("disable HighSpeed\n"); + mmio_clrbits_32(handle->ctrl.sdRegBaseAddr + + SD4_EMMC_TOP_CTRL_OFFSET, + SD4_EMMC_TOP_CTRL_HSEN_MASK); + } +} + +int32_t chal_sd_stop(void) +{ + uintptr_t idm_rst_ctrl_addr = EMMC_IDM_RESET_CTRL_ADDR; + + /* Configure IO pins */ + emmc_soft_reset(); + + /* Reset the SDIO controller */ + mmio_write_32(idm_rst_ctrl_addr, 1); + SD_US_DELAY(100); + mmio_write_32(idm_rst_ctrl_addr, 0); + SD_US_DELAY(100); + + return SD_OK; +} + +/* + * Check if host supports specified capability + * returns -ve val on error, 0 if capability not supported else 1. + */ +int32_t chal_sd_check_cap(CHAL_HANDLE *sd_handle, uint32_t caps) +{ + struct sd_dev *handle; + + if (sd_handle == NULL) + return SD_INVALID_HANDLE; + + handle = (struct sd_dev *) sd_handle; + + if (caps & mmio_read_32(handle->ctrl.sdRegBaseAddr + + SD4_EMMC_TOP_CAPABILITIES1_OFFSET)) + return 1; + else + return 0; +} + +int32_t chal_sd_start(CHAL_HANDLE *sd_handle, + uint32_t mode, uint32_t sd_base, uint32_t host_base) +{ + + struct sd_dev *handle; + int32_t rval = SD_FAIL; + + if (sd_handle == NULL) + return SD_INVALID_HANDLE; + + handle = (struct sd_dev *) sd_handle; + + handle->cfg.mode = SD_PIO_MODE; /* set to PIO mode first for init */ + handle->cfg.dma = SD_DMA_OFF; + + chal_sd_setup_handler(handle, sd_base, host_base); + + /* init and start hw */ + rval = chal_sd_init(sd_handle); + if (rval != SD_OK) + return rval; + + chal_sd_clear_pending_irq(sd_handle); + + handle->ctrl.eventList = 0; + handle->cfg.mode = mode; + + return SD_OK; +} + +/* + * Function to check 8bits of err generated from auto CMD12 + */ +int32_t chal_sd_get_atuo12_error(CHAL_HANDLE *sd_handle) +{ + struct sd_dev *handle; + + if (sd_handle == NULL) + return SD_INVALID_HANDLE; + + handle = (struct sd_dev *) sd_handle; + + return (mmio_read_32(handle->ctrl.sdRegBaseAddr + + SD4_EMMC_TOP_ERRSTAT_OFFSET) & 0xFF); +} + +/* + * Read present state register + */ +uint32_t chal_sd_get_present_status(CHAL_HANDLE *sd_handle) +{ + struct sd_dev *handle; + + if (sd_handle == NULL) + return SD_INVALID_HANDLE; + + handle = (struct sd_dev *) sd_handle; + + return mmio_read_32(handle->ctrl.sdRegBaseAddr + + SD4_EMMC_TOP_PSTATE_OFFSET); +} + +/* + * Set SD bus width + */ +int32_t chal_sd_config_bus_width(CHAL_HANDLE *sd_handle, int32_t width) +{ + uint32_t ctl_val; + struct sd_dev *handle; + + if (sd_handle == NULL) + return SD_INVALID_HANDLE; + + handle = (struct sd_dev *)sd_handle; + + ctl_val = mmio_read_32(handle->ctrl.sdRegBaseAddr + + SD4_EMMC_TOP_CTRL_OFFSET); + + switch (width) { +#ifdef DRIVER_EMMC_ENABLE_DATA_WIDTH_8BIT + case SD_BUS_DATA_WIDTH_8BIT: + ctl_val &= ~SD_BUS_DATA_WIDTH_4BIT; + ctl_val |= SD_BUS_DATA_WIDTH_8BIT; + break; +#endif + case SD_BUS_DATA_WIDTH_4BIT: + ctl_val &= ~SD_BUS_DATA_WIDTH_8BIT; + ctl_val |= SD_BUS_DATA_WIDTH_4BIT; + break; + case SD_BUS_DATA_WIDTH_1BIT: + ctl_val &= ~(SD_BUS_DATA_WIDTH_4BIT | SD_BUS_DATA_WIDTH_8BIT); + break; + default: + return SD_INV_DATA_WIDTH; + }; + + mmio_write_32(handle->ctrl.sdRegBaseAddr + SD4_EMMC_TOP_CTRL_OFFSET, + ctl_val); + + return SD_OK; +} + +/* + * Function to enable or disable DMA control. + */ +int32_t chal_sd_set_dma(CHAL_HANDLE *sd_handle, uint32_t mode) +{ + uint32_t val; + struct sd_dev *handle; + int32_t rc; + + if (sd_handle == NULL) + return SD_INVALID_HANDLE; + + handle = (struct sd_dev *)sd_handle; + + if (mode) { + rc = chal_sd_check_cap(sd_handle, + SD4_EMMC_TOP_CAPABILITIES1_SDMA_MASK | + SD4_EMMC_TOP_CAPABILITIES1_ADMA2_MASK); + if (rc < 0) + return rc; + + if (rc) { + + handle->cfg.dma = mode; + val = mmio_read_32(handle->ctrl.sdRegBaseAddr + + SD4_EMMC_TOP_CTRL_OFFSET); + val &= ~(SD4_EMMC_TOP_CTRL_DMASEL_MASK); + val |= handle->cfg.dma - 1; + mmio_write_32(handle->ctrl.sdRegBaseAddr + + SD4_EMMC_TOP_CTRL_OFFSET, val); + return SD_OK; + } + } + handle->cfg.dma = 0; + + return SD_FAIL; +} + +/* + * Get current DMA address. + * Called only when there is no data transaction activity. + */ +uintptr_t chal_sd_get_dma_addr(CHAL_HANDLE *sd_handle) +{ + struct sd_dev *handle; + + if (sd_handle == NULL) + return SD_INVALID_HANDLE; + + handle = (struct sd_dev *) sd_handle; + + if (handle->cfg.dma == SD_DMA_OFF) + return 0; + + return (uintptr_t)mmio_read_32(handle->ctrl.sdRegBaseAddr + + SD4_EMMC_TOP_SYSADDR_OFFSET); +} + +int32_t chal_sd_send_cmd(CHAL_HANDLE *sd_handle, uint32_t cmd_idx, + uint32_t argument, uint32_t options) +{ + uint32_t cmd_mode_reg = 0; + struct sd_dev *handle; + + if (sd_handle == NULL) + return SD_INVALID_HANDLE; + + handle = (struct sd_dev *) sd_handle; + + EMMC_TRACE("%s %d cmd:%d argReg:%x options:%x\n", + __func__, __LINE__, cmd_idx, argument, options); + + /* Configure the value for command and mode registers */ + cmd_mode_reg = (cmd_idx << 24) | options; + + /* + * 1. Write block size reg & block count reg, + * this is done in the tx or rx setup + */ + mmio_write_32(handle->ctrl.sdRegBaseAddr + SD4_EMMC_TOP_BLOCK_OFFSET, + handle->ctrl.blkReg); + + /* 2. Write argument reg */ + mmio_write_32(handle->ctrl.sdRegBaseAddr + SD4_EMMC_TOP_ARG_OFFSET, + argument); + handle->ctrl.argReg = argument; + + /* + * 3. Write transfer mode reg & command reg, check the DMA bit which is + * set before this function call if it is selected. + */ + if (cmd_idx == 24 || cmd_idx == 25 || cmd_idx == 18 || cmd_idx == 17 || + cmd_idx == 42 || cmd_idx == 51 || cmd_idx == 53) + cmd_mode_reg |= ((handle->cfg.dma) ? 1 : 0); + + mmio_write_32(handle->ctrl.sdRegBaseAddr + SD4_EMMC_TOP_CMD_OFFSET, + cmd_mode_reg); + + handle->ctrl.cmdIndex = cmd_idx; + + return SD_OK; +} + +int32_t chal_sd_set_dma_addr(CHAL_HANDLE *sd_handle, uintptr_t address) +{ + struct sd_dev *handle; + + if (sd_handle == NULL) + return SD_INVALID_HANDLE; + + handle = (struct sd_dev *) sd_handle; + + if (handle->cfg.dma == SD_DMA_OFF) + return SD_FAIL; + + mmio_write_32(handle->ctrl.sdRegBaseAddr + SD4_EMMC_TOP_SYSADDR_OFFSET, + address); + return SD_OK; +} + +uint32_t chal_sd_freq_2_div_ctrl_setting(uint32_t desired_freq) +{ + /* + * Divider control setting represents 1/2 of the actual divider value. + * + * DesiredFreq = BaseClockFreq / (2 * div_ctrl_setting) + * + * ==> div_ctrl_setting = BaseClockFreq / (2 * DesiredFreq) + */ + uint32_t div_ctrl_setting; + uint32_t actual_freq; + + assert(desired_freq != 0); + + /* Special case, 0 = divider of 1. */ + if (desired_freq >= BASE_CLK_FREQ) + return 0; + + /* Normal case, desired_freq < BASE_CLK_FREQ */ + div_ctrl_setting = BASE_CLK_FREQ / (2 * desired_freq); + + actual_freq = BASE_CLK_FREQ / (2 * div_ctrl_setting); + + if (actual_freq > desired_freq) { + /* + * Division does not result in exact frequency match. + * Make sure resulting frequency does not exceed requested freq. + */ + div_ctrl_setting++; + } + + return div_ctrl_setting; +} + +int32_t chal_sd_set_clock(CHAL_HANDLE *sd_handle, uint32_t div_ctrl_setting, + uint32_t on) +{ + uint32_t value; + struct sd_dev *handle; + uint32_t time; + uint32_t clk_sel_high_byte = 0xFF & (div_ctrl_setting >> 8); + uint32_t clk_sel_low_byte = 0xFF & div_ctrl_setting; + + if (sd_handle == NULL) + return SD_INVALID_HANDLE; + + EMMC_TRACE("set_clock(div_ctrl_setting=%d,on=%d)\n", + div_ctrl_setting, on); + + handle = (struct sd_dev *) sd_handle; + + /* Read control register content. */ + value = mmio_read_32(handle->ctrl.sdRegBaseAddr + + SD4_EMMC_TOP_CTRL1_OFFSET); + + /* Disable Clock */ + value &= ~(SD4_EMMC_TOP_CTRL1_SDCLKEN_MASK); + + mmio_write_32(handle->ctrl.sdRegBaseAddr + SD4_EMMC_TOP_CTRL1_OFFSET, + value); + + /* Clear bits of interest. */ + value &= ~(SD4_EMMC_TOP_CTRL1_SDCLKSEL_MASK | + SD4_EMMC_TOP_CTRL1_SDCLKSEL_UP_MASK); + + /* Set bits of interest to new value. */ + value |= (SD4_EMMC_TOP_CTRL1_SDCLKSEL_MASK & + (clk_sel_low_byte << SD4_EMMC_TOP_CTRL1_SDCLKSEL_SHIFT)); + value |= (SD4_EMMC_TOP_CTRL1_SDCLKSEL_UP_MASK & + (clk_sel_high_byte << SD4_EMMC_TOP_CTRL1_SDCLKSEL_UP_SHIFT)); + value |= SD4_EMMC_TOP_CTRL1_ICLKEN_MASK; + + /* Write updated value back to control register. */ + mmio_write_32(handle->ctrl.sdRegBaseAddr + SD4_EMMC_TOP_CTRL1_OFFSET, + value); + + time = 0; + do { + value = mmio_read_32(handle->ctrl.sdRegBaseAddr + + SD4_EMMC_TOP_CTRL1_OFFSET); + + if ((value & SD4_EMMC_TOP_CTRL1_ICLKSTB_MASK) == + SD4_EMMC_TOP_CTRL1_ICLKSTB_MASK) + break; + + mdelay(1); + } while (time++ < EMMC_CLOCK_SETTING_TIMEOUT_MS); + + if (time >= EMMC_CLOCK_SETTING_TIMEOUT_MS) + WARN("%s %d clock settings timeout happenedi (%dms)\n", + __func__, __LINE__, time); + + VERBOSE("EMMC: clock settings delay: %dms\n", time); + + value = mmio_read_32(handle->ctrl.sdRegBaseAddr + + SD4_EMMC_TOP_CTRL1_OFFSET); + + if (on) + value |= SD4_EMMC_TOP_CTRL1_SDCLKEN_MASK; + + mmio_write_32(handle->ctrl.sdRegBaseAddr + SD4_EMMC_TOP_CTRL1_OFFSET, + value); + + return SD_OK; +} + +/* + * function to setup DMA buffer and data length, calculates block + * size and the number of blocks to be transferred and return + * the DMA buffer address. + */ +int32_t chal_sd_setup_xfer(CHAL_HANDLE *sd_handle, + uint8_t *data, uint32_t length, int32_t dir) +{ + uint32_t blocks = 0; + struct sd_dev *handle; + + if (sd_handle == NULL) + return SD_INVALID_HANDLE; + + handle = (struct sd_dev *) sd_handle; + + if (length <= handle->cfg.blockSize) { + handle->ctrl.blkReg = length | handle->cfg.dmaBoundary; + } else { + blocks = length / handle->cfg.blockSize; + handle->ctrl.blkReg = (blocks << 16) | handle->cfg.blockSize | + handle->cfg.dmaBoundary; + } + + if (handle->cfg.dma != SD_DMA_OFF) { + /* For DMA target address setting, physical address should be used */ + mmio_write_32(handle->ctrl.sdRegBaseAddr + SD4_EMMC_TOP_SYSADDR_OFFSET, + (uintptr_t)data); + } + + return SD_OK; +} + +#ifdef INCLUDE_EMMC_DRIVER_WRITE_CODE +/* + * function to write one block data directly to the + * host controller's FIFO which is 1K uint8_t or + * 2K uint8_t in size. + * It is used in Non-DMA mode for data transmission. + */ +int32_t chal_sd_write_buffer(CHAL_HANDLE *sd_handle, uint32_t length, + uint8_t *data) +{ + uint32_t i, leftOver = 0, blockSize, size, value = 0; + struct sd_dev *handle; + + if (sd_handle == NULL) + return SD_INVALID_HANDLE; + + handle = (struct sd_dev *) sd_handle; + + blockSize = handle->cfg.blockSize; + + if (length == 0) + return SD_OK; + + /* PIO mode, push into fifo word by word */ + if (length >= blockSize) { + size = blockSize; + } else { + size = ((length >> 2) << 2); + leftOver = length % 4; + } + + for (i = 0; i < size; i += 4) { + value = *(uint32_t *)(data + i); + mmio_write_32(handle->ctrl.sdRegBaseAddr + + SD4_EMMC_TOP_BUFDAT_OFFSET, value); + } +/* + * BUG ALERT: + * This implementation has TWO issues that must be addressed before you + * can safely INCLUDE_EMMC_DRIVER_WRITE_CODE. + * + * (1) For the last leftOver bytes, driver writes full word, which means + * some of the eMMC content (i.e. "4 - leftOver" will be erroneously + * overwritten). + * (2) eMMC is a block device. What happens when less than a full block of + * data is submitted??? + */ + if (leftOver > 0) { + value = ((*(uint32_t *)(data + i)) << (4 - leftOver)); + mmio_write_32(handle->ctrl.sdRegBaseAddr + + SD4_EMMC_TOP_BUFDAT_OFFSET, value); + } + + return SD_OK; +} +#endif /* INCLUDE_EMMC_DRIVER_WRITE_CODE */ + +/* + * Function to read maximal one block data directly + * from the data port of the host controller (FIFO). It is used + * in Non-DMA mode for data transmission. + */ +int32_t chal_sd_read_buffer(CHAL_HANDLE *sd_handle, uint32_t length, + uint8_t *data) +{ + uint32_t i, size, leftOver, blockSize, value; + struct sd_dev *handle; + + if (sd_handle == NULL) + return SD_INVALID_HANDLE; + + handle = (struct sd_dev *)sd_handle; + + value = 0; + + blockSize = handle->cfg.blockSize; + + /* PIO mode, extract fifo word by word */ + if (length >= blockSize) { + size = blockSize; + leftOver = 0; + } else { + leftOver = length % 4; + size = ((length >> 2) << 2); + } + + for (i = 0; i < size; i += 4) { + value = + mmio_read_32(handle->ctrl.sdRegBaseAddr + + SD4_EMMC_TOP_BUFDAT_OFFSET); + memcpy((void *)(data + i), &value, sizeof(uint32_t)); + } + + if (leftOver > 0) { + value = mmio_read_32(handle->ctrl.sdRegBaseAddr + + SD4_EMMC_TOP_BUFDAT_OFFSET); + + /* + * Copy remaining non-full word bytes. + * (We run ARM as Little Endian) + */ + uint8_t j = 0; + + for (j = 0; j < leftOver; j++) { + data[i + j] = (value >> (j * 8)) & 0xFF; + } + } + + return SD_OK; +} + +/* + * Resets both DAT or CMD line. + */ +int32_t chal_sd_reset_line(CHAL_HANDLE *sd_handle, uint32_t line) +{ + uint32_t control, flag; + struct sd_dev *handle; + + if (sd_handle == NULL) + return SD_INVALID_HANDLE; + + handle = (struct sd_dev *) sd_handle; + + flag = SD4_EMMC_TOP_CTRL1_CMDRST_MASK | SD4_EMMC_TOP_CTRL1_DATRST_MASK; + + if (flag != (line | flag)) + return SD_FAIL; + + control = mmio_read_32(handle->ctrl.sdRegBaseAddr + + SD4_EMMC_TOP_CTRL1_OFFSET); + control |= line; + mmio_write_32(handle->ctrl.sdRegBaseAddr + SD4_EMMC_TOP_CTRL1_OFFSET, + control); + + /* reset CMD and DATA line should always work, no need to timed out */ + do { + control = mmio_read_32(handle->ctrl.sdRegBaseAddr + + SD4_EMMC_TOP_CTRL1_OFFSET); + } while (control & line); + + return SD_OK; +} + +/* + * Function to be called once a SD command is done to read + * back it's response data. + */ +int32_t chal_sd_get_response(CHAL_HANDLE *sd_handle, uint32_t *resp) +{ + struct sd_dev *handle; + + if (sd_handle == NULL) + return SD_INVALID_HANDLE; + + handle = (struct sd_dev *) sd_handle; + resp[0] = mmio_read_32(handle->ctrl.sdRegBaseAddr + + SD4_EMMC_TOP_RESP0_OFFSET); + resp[1] = mmio_read_32(handle->ctrl.sdRegBaseAddr + + SD4_EMMC_TOP_RESP2_OFFSET); + resp[2] = mmio_read_32(handle->ctrl.sdRegBaseAddr + + SD4_EMMC_TOP_RESP4_OFFSET); + resp[3] = mmio_read_32(handle->ctrl.sdRegBaseAddr + + SD4_EMMC_TOP_RESP6_OFFSET); + + return SD_OK; +} + +/* + * The function is called to clean all the pending interrupts. + */ +int32_t chal_sd_clear_pending_irq(CHAL_HANDLE *sd_handle) +{ + uint32_t status = SD_OK; + struct sd_dev *handle; + + if (sd_handle == NULL) + return SD_INVALID_HANDLE; + + handle = (struct sd_dev *)sd_handle; + + /* Make sure clean all interrupts */ + do { + mmio_write_32(handle->ctrl.sdRegBaseAddr + + SD4_EMMC_TOP_INTR_OFFSET, 0xFFFFFFFF); + SD_US_DELAY(10); + } while (mmio_read_32(handle->ctrl.sdRegBaseAddr + + SD4_EMMC_TOP_INTR_OFFSET)); + + return status; +} + +/* + * The function returns interrupt status register value. + */ +int32_t chal_sd_get_irq_status(CHAL_HANDLE *sd_handle) +{ + struct sd_dev *handle; + + if (sd_handle == NULL) + return SD_INVALID_HANDLE; + + handle = (struct sd_dev *) sd_handle; + + return (mmio_read_32(handle->ctrl.sdRegBaseAddr + + SD4_EMMC_TOP_INTR_OFFSET)); +} + +/* + * The function clears interrupt(s) specified in the mask. + */ +int32_t chal_sd_clear_irq(CHAL_HANDLE *sd_handle, uint32_t mask) +{ + struct sd_dev *handle; + + if (sd_handle == NULL) + return SD_INVALID_HANDLE; + + handle = (struct sd_dev *) sd_handle; + + /* Make sure clean masked interrupts */ + do { + mmio_write_32(handle->ctrl.sdRegBaseAddr + + SD4_EMMC_TOP_INTR_OFFSET, mask); + SD_US_DELAY(10); + } while (mask & + mmio_read_32(handle->ctrl.sdRegBaseAddr + + SD4_EMMC_TOP_INTR_OFFSET)); + + return SD_OK; +} + +/* + * Description: The function configures the SD host controller. + */ +int32_t chal_sd_config(CHAL_HANDLE *sd_handle, uint32_t speed, uint32_t retry, + uint32_t boundary, uint32_t blkSize, uint32_t dma) +{ + struct sd_dev *handle; + + if (sd_handle == NULL) + return SD_INVALID_HANDLE; + + handle = (struct sd_dev *) sd_handle; + + handle->cfg.speedMode = speed; + handle->cfg.retryLimit = retry; + handle->cfg.dmaBoundary = boundary; + handle->cfg.blockSize = blkSize; + + chal_sd_set_dma(sd_handle, dma); + SD_US_DELAY(100); + chal_sd_set_dma_boundary(handle, boundary); + SD_US_DELAY(100); + + chal_sd_set_speed(sd_handle, speed); + + SD_US_DELAY(100); + return SD_OK; +} + +/* + * Cleans up HC FIFO. + */ +void chal_sd_dump_fifo(CHAL_HANDLE *sd_handle) +{ + struct sd_dev *handle; + + if (sd_handle == NULL) + return; + + handle = (struct sd_dev *)sd_handle; + + /* in case there still data in the host buffer */ + while (mmio_read_32(handle->ctrl.sdRegBaseAddr + + SD4_EMMC_TOP_PSTATE_OFFSET) & 0x800) { + mmio_read_32(handle->ctrl.sdRegBaseAddr + + SD4_EMMC_TOP_BUFDAT_OFFSET); + }; +} + +/* + * Enable or disable a SD interrupt signal. + */ +void chal_sd_set_irq_signal(CHAL_HANDLE *sd_handle, uint32_t mask, + uint32_t state) +{ + struct sd_dev *handle; + + if (sd_handle == NULL) + return; + + handle = (struct sd_dev *)sd_handle; + + if (state) + mmio_setbits_32(handle->ctrl.sdRegBaseAddr + + SD4_EMMC_TOP_INTREN2_OFFSET, mask); + else + mmio_clrbits_32(handle->ctrl.sdRegBaseAddr + + SD4_EMMC_TOP_INTREN2_OFFSET, mask); +} diff --git a/drivers/brcm/emmc/emmc_csl_sdcard.c b/drivers/brcm/emmc/emmc_csl_sdcard.c new file mode 100644 index 0000000..789ed9c --- /dev/null +++ b/drivers/brcm/emmc/emmc_csl_sdcard.c @@ -0,0 +1,1090 @@ +/* + * Copyright (c) 2016 - 2020, Broadcom + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include +#include +#include +#include +#include + +#include +#include + +#include "bcm_emmc.h" +#include "emmc_chal_types.h" +#include "emmc_csl_sdprot.h" +#include "emmc_chal_sd.h" +#include "emmc_csl_sdcmd.h" +#include "emmc_csl_sd.h" +#include "emmc_pboot_hal_memory_drv.h" + +#define SD_CARD_BUSY 0x80000000 +#define SD_CARD_RETRY_LIMIT 1000 +#define SD_CARD_HIGH_SPEED_PS 13 +#define SD_CHK_HIGH_SPEED_MODE 0x00FFFFF1 +#define SD_SET_HIGH_SPEED_MODE 0x80FFFFF1 +#define SD_MMC_ENABLE_HIGH_SPEED 0x03b90100 //0x03b90103 +#define SD_MMC_8BIT_MODE 0x03b70200 +#define SD_MMC_4BIT_MODE 0x03b70100 +#define SD_MMC_1BIT_MODE 0x03b70000 + +#define SD_MMC_BOOT_8BIT_MODE 0x03b10200 +#define SD_MMC_BOOT_4BIT_MODE 0x03b10100 +#define SD_MMC_BOOT_1BIT_MODE 0x03b10000 +#define SDIO_HW_EMMC_EXT_CSD_BOOT_CNF 0X03B30000 + +#ifdef USE_EMMC_FIP_TOC_CACHE +/* + * Cache size mirrors the size of the global eMMC temp buffer + * which is used for non-image body reads such as headers, ToC etc. + */ +#define CACHE_SIZE ((EMMC_BLOCK_SIZE) * 2) +#define PARTITION_BLOCK_ADDR ((PLAT_FIP_ATTEMPT_OFFSET)/(EMMC_BLOCK_SIZE)) + +static uint32_t cached_partition_block; +static uint8_t cached_block[CACHE_SIZE]; +#endif + +static int set_card_data_width(struct sd_handle *handle, int width); +static int abort_err(struct sd_handle *handle); +static int err_recovery(struct sd_handle *handle, uint32_t errors); +static int xfer_data(struct sd_handle *handle, uint32_t mode, uint32_t addr, + uint32_t length, uint8_t *base); + +int set_boot_config(struct sd_handle *handle, uint32_t config) +{ + return mmc_cmd6(handle, SDIO_HW_EMMC_EXT_CSD_BOOT_CNF | config); +} + +void process_csd_mmc_speed(struct sd_handle *handle, uint32_t csd_mmc_speed) +{ + uint32_t div_ctrl_setting; + + /* CSD field TRAN_SPEED: + * Bits [2:0] 0 = 100 KHz + * 1 = 1 MHz + * 2 = 10 MHz + * 3 = 100 MHz + * 4...7 Reserved. + * Bits [6:3] 0 = Reserved + * 1 = 1.0 + * 2 = 1.2 + * 3 = 1.3 + * 4 = 1.5 + * 5 = 2.0 + * 6 = 2.6 + * 7 = 3.0 + * 8 = 3.5 + * 9 = 4.0 + * A = 4.5 + * B = 5.2 + * C = 5.5 + * D = 6.0 + * E = 7.0 + * F = 8.0 + * For cards supporting version 4.0, 4.1, and 4.2 of the standard, + * the value shall be 20 MHz (0x2A). + * For cards supporting version 4.3 , the value shall be 26 MHz (0x32) + */ + + switch (csd_mmc_speed & 0x7F) { + case 0x2A: + EMMC_TRACE("Speeding up eMMC clock to 20MHz\n"); + div_ctrl_setting = + chal_sd_freq_2_div_ctrl_setting(20 * 1000 * 1000); + break; + case 0x32: + EMMC_TRACE("Speeding up eMMC clock to 26MHz\n"); + div_ctrl_setting = + chal_sd_freq_2_div_ctrl_setting(26 * 1000 * 1000); + break; + default: + /* Unknown */ + return; + } + + chal_sd_set_clock((CHAL_HANDLE *) handle->device, div_ctrl_setting, 0); + + chal_sd_set_clock((CHAL_HANDLE *) handle->device, div_ctrl_setting, 1); + + SD_US_DELAY(1000); +} + + +/* + * The function changes SD/SDIO/MMC card data width if + * the card support configurable data width. The host controller + * and the card has to be in the same bus data width. + */ +int set_card_data_width(struct sd_handle *handle, int width) +{ + uint32_t data_width = 0; + int is_valid_arg = 1; + int rc = SD_FAIL; + char *bitwidth_str = " "; + char *result_str = "failed"; + + switch (width) { +#ifdef DRIVER_EMMC_ENABLE_DATA_WIDTH_8BIT + case SD_BUS_DATA_WIDTH_8BIT: + data_width = SD_MMC_8BIT_MODE; +#if LOG_LEVEL >= LOG_LEVEL_VERBOSE + bitwidth_str = "8_BIT"; +#endif + break; +#endif + case SD_BUS_DATA_WIDTH_4BIT: + data_width = SD_MMC_4BIT_MODE; +#if LOG_LEVEL >= LOG_LEVEL_VERBOSE + bitwidth_str = "4_BIT"; +#endif + break; + + case SD_BUS_DATA_WIDTH_1BIT: + data_width = SD_MMC_1BIT_MODE; +#if LOG_LEVEL >= LOG_LEVEL_VERBOSE + bitwidth_str = "1_BIT"; +#endif + break; + + default: + is_valid_arg = 0; +#if LOG_LEVEL >= LOG_LEVEL_VERBOSE + bitwidth_str = "unknown"; +#endif + break; + } + + if (is_valid_arg) { + rc = mmc_cmd6(handle, data_width); + if (rc == SD_OK) { +#if LOG_LEVEL >= LOG_LEVEL_VERBOSE + result_str = "succeeded"; +#endif + chal_sd_config_bus_width((CHAL_HANDLE *) handle->device, + width); + } else { +#if LOG_LEVEL >= LOG_LEVEL_VERBOSE + result_str = "failed"; +#endif + } + } else { + rc = SD_FAIL; +#if LOG_LEVEL >= LOG_LEVEL_VERBOSE + result_str = "ignored"; +#endif + } + + VERBOSE("SDIO Data Width(%s) %s.\n", bitwidth_str, result_str); + + return rc; +} + + +/* + * Error handling routine. Does abort data + * transmission if error is found. + */ +static int abort_err(struct sd_handle *handle) +{ + uint32_t present, options, event, rel = 0; + struct sd_resp cmdRsp; + + handle->device->ctrl.argReg = 0; + handle->device->ctrl.cmdIndex = SD_CMD_STOP_TRANSMISSION; + + options = (SD_CMD_STOP_TRANSMISSION << 24) | + (SD_CMDR_RSP_TYPE_R1b_5b << SD_CMDR_RSP_TYPE_S) | + SD4_EMMC_TOP_CMD_CRC_EN_MASK | + SD4_EMMC_TOP_CMD_CCHK_EN_MASK; + + chal_sd_send_cmd((CHAL_HANDLE *) handle->device, + handle->device->ctrl.cmdIndex, + handle->device->ctrl.argReg, options); + + event = wait_for_event(handle, + SD4_EMMC_TOP_INTR_CMDDONE_MASK | + SD_ERR_INTERRUPTS, + handle->device->cfg.wfe_retry); + + if (event & SD_CMD_ERROR_INT) { + rel = SD_ERROR_NON_RECOVERABLE; + } else { + if (event & SD_DAT_TIMEOUT) { + return SD_ERROR_NON_RECOVERABLE; + } + + chal_sd_get_response((CHAL_HANDLE *) handle->device, + (uint32_t *)&cmdRsp); + + process_cmd_response(handle, handle->device->ctrl.cmdIndex, + cmdRsp.data.r2.rsp1, cmdRsp.data.r2.rsp2, + cmdRsp.data.r2.rsp3, cmdRsp.data.r2.rsp4, + &cmdRsp); + + SD_US_DELAY(2000); + + present = + chal_sd_get_present_status((CHAL_HANDLE *) handle->device); + + if ((present & 0x00F00000) == 0x00F00000) + rel = SD_ERROR_RECOVERABLE; + else + rel = SD_ERROR_NON_RECOVERABLE; + } + + return rel; +} + + +/* + * The function handles real data transmission on both DMA and + * none DMA mode, In None DMA mode the data transfer starts + * when the command is sent to the card, data has to be written + * into the host controllers buffer at this time one block + * at a time. + * In DMA mode, the real data transfer is done by the DMA engine + * and this functions just waits for the data transfer to complete. + * + */ +int process_data_xfer(struct sd_handle *handle, uint8_t *buffer, uint32_t addr, + uint32_t length, int dir) +{ + if (dir == SD_XFER_HOST_TO_CARD) { +#ifdef INCLUDE_EMMC_DRIVER_WRITE_CODE + if (handle->device->cfg.dma == SD_DMA_OFF) { + /* + * In NON DMA mode, the real data xfer starts from here + */ + if (write_buffer(handle, length, buffer)) + return SD_WRITE_ERROR; + } else { + wait_for_event(handle, + SD4_EMMC_TOP_INTR_TXDONE_MASK | + SD_ERR_INTERRUPTS, + handle->device->cfg.wfe_retry); + + if (handle->device->ctrl.cmdStatus == SD_OK) + return SD_OK; + + check_error(handle, handle->device->ctrl.cmdStatus); + return SD_WRITE_ERROR; + } +#else + return SD_WRITE_ERROR; +#endif + } else { /* SD_XFER_CARD_TO_HOST */ + + if (handle->device->cfg.dma == SD_DMA_OFF) { + /* In NON DMA mode, the real data + * transfer starts from here + */ + if (read_buffer(handle, length, buffer)) + return SD_READ_ERROR; + + } else { /* for DMA mode */ + + /* + * once the data transmission is done + * copy data to the host buffer. + */ + wait_for_event(handle, + SD4_EMMC_TOP_INTR_TXDONE_MASK | + SD_ERR_INTERRUPTS, + handle->device->cfg.wfe_retry); + + if (handle->device->ctrl.cmdStatus == SD_OK) + return SD_OK; + + check_error(handle, handle->device->ctrl.cmdStatus); + return SD_READ_ERROR; + } + } + return SD_OK; +} + + +/* + * The function sets block size for the next SD/SDIO/MMC + * card read/write command. + */ +int select_blk_sz(struct sd_handle *handle, uint16_t size) +{ + return sd_cmd16(handle, size); +} + + +/* + * The function initializes the SD/SDIO/MMC/CEATA and detects + * the card according to the flag of detection. + * Once this function is called, the card is put into ready state + * so application can do data transfer to and from the card. + */ +int init_card(struct sd_handle *handle, int detection) +{ + /* + * After Reset, eMMC comes up in 1 Bit Data Width by default. + * Set host side to match. + */ + chal_sd_config_bus_width((CHAL_HANDLE *) handle->device, + SD_BUS_DATA_WIDTH_1BIT); + +#ifdef USE_EMMC_FIP_TOC_CACHE + cached_partition_block = 0; +#endif + handle->device->ctrl.present = 0; /* init card present to be no card */ + + init_mmc_card(handle); + + handle->device->ctrl.present = 1; /* card is detected */ + + /* switch the data width back */ + if (handle->card->type != SD_CARD_MMC) + return SD_FAIL; + + /* + * Dynamically set Data Width to highest supported value. + * Try different data width settings (highest to lowest). + * Verify each setting by reading EXT_CSD and comparing + * against the EXT_CSD contents previously read in call to + * init_mmc_card() earlier. Stop at first verified data width + * setting. + */ + { +#define EXT_CSD_PROPERTIES_SECTION_START_INDEX 192 +#define EXT_CSD_PROPERTIES_SECTION_END_INDEX 511 + uint8_t buffer[EXT_CSD_SIZE]; +#ifdef DRIVER_EMMC_ENABLE_DATA_WIDTH_8BIT + /* Try 8 Bit Data Width */ + chal_sd_config_bus_width((CHAL_HANDLE *) handle->device, + SD_BUS_DATA_WIDTH_8BIT); + if ((!set_card_data_width(handle, SD_BUS_DATA_WIDTH_8BIT)) && + (!mmc_cmd8(handle, buffer)) && + (!memcmp(&buffer[EXT_CSD_PROPERTIES_SECTION_START_INDEX], + &(emmc_global_buf_ptr->u.Ext_CSD_storage[EXT_CSD_PROPERTIES_SECTION_START_INDEX]), + EXT_CSD_PROPERTIES_SECTION_END_INDEX - EXT_CSD_PROPERTIES_SECTION_START_INDEX + 1))) + + return SD_OK; +#endif + /* Fall back to 4 Bit Data Width */ + chal_sd_config_bus_width((CHAL_HANDLE *) handle->device, + SD_BUS_DATA_WIDTH_4BIT); + if ((!set_card_data_width(handle, SD_BUS_DATA_WIDTH_4BIT)) && + (!mmc_cmd8(handle, buffer)) && + (!memcmp(&buffer[EXT_CSD_PROPERTIES_SECTION_START_INDEX], + &(emmc_global_buf_ptr->u.Ext_CSD_storage[EXT_CSD_PROPERTIES_SECTION_START_INDEX]), + EXT_CSD_PROPERTIES_SECTION_END_INDEX - EXT_CSD_PROPERTIES_SECTION_START_INDEX + 1))) + + return SD_OK; + + /* Fall back to 1 Bit Data Width */ + chal_sd_config_bus_width((CHAL_HANDLE *) handle->device, + SD_BUS_DATA_WIDTH_1BIT); + /* Just use 1 Bit Data Width then. */ + if (!set_card_data_width(handle, SD_BUS_DATA_WIDTH_1BIT)) + return SD_OK; + + } + return SD_CARD_INIT_ERROR; +} + + +/* + * The function handles MMC/CEATA card initialization. + */ +int init_mmc_card(struct sd_handle *handle) +{ + uint32_t ocr = 0, newOcr, rc, limit = 0; + uint32_t cmd1_option = 0x40300000; + uint32_t sec_count; + + handle->card->type = SD_CARD_MMC; + + do { + SD_US_DELAY(1000); + newOcr = 0; + ocr = 0; + rc = sd_cmd1(handle, cmd1_option, &newOcr); + limit++; + + if (rc == SD_OK) + ocr = newOcr; + + } while (((ocr & SD_CARD_BUSY) == 0) && (limit < SD_CARD_RETRY_LIMIT)); + + if (limit >= SD_CARD_RETRY_LIMIT) { + handle->card->type = SD_CARD_UNKNOWN; + EMMC_TRACE("CMD1 Timeout: Device is not ready\n"); + return SD_CARD_UNKNOWN; + } + + /* Save the ocr register */ + handle->device->ctrl.ocr = ocr; + + /* Ready State */ + rc = sd_cmd2(handle); + if (rc != SD_OK) { + handle->card->type = SD_CARD_UNKNOWN; + return SD_CARD_UNKNOWN; + } + + rc = sd_cmd3(handle); + if (rc != SD_OK) { + handle->card->type = SD_CARD_UNKNOWN; + return SD_CARD_UNKNOWN; + } + /* read CSD */ + rc = sd_cmd9(handle, &emmc_global_vars_ptr->cardData); + if (rc != SD_OK) { + handle->card->type = SD_CARD_UNKNOWN; + return SD_CARD_UNKNOWN; + } + + /* Increase clock frequency according to what the card advertises */ + EMMC_TRACE("From CSD... cardData.csd.mmc.speed = 0x%X\n", + emmc_global_vars_ptr->cardData.csd.mmc.speed); + process_csd_mmc_speed(handle, + emmc_global_vars_ptr->cardData.csd.mmc.speed); + + /* goto transfer mode */ + rc = sd_cmd7(handle, handle->device->ctrl.rca); + if (rc != SD_OK) { + handle->card->type = SD_CARD_UNKNOWN; + return SD_CARD_UNKNOWN; + } + + rc = mmc_cmd8(handle, emmc_global_buf_ptr->u.Ext_CSD_storage); + if (rc == SD_OK) { + /* calcul real capacity */ + sec_count = emmc_global_buf_ptr->u.Ext_CSD_storage[212] | + emmc_global_buf_ptr->u.Ext_CSD_storage[213] << 8 | + emmc_global_buf_ptr->u.Ext_CSD_storage[214] << 16 | + emmc_global_buf_ptr->u.Ext_CSD_storage[215] << 24; + + EMMC_TRACE("Device density = %ldMBytes\n", + handle->card->size / (1024 * 1024)); + + if (sec_count > 0) { + handle->card->size = (uint64_t)sec_count * 512; + + EMMC_TRACE("Updated Device density = %ldMBytes\n", + handle->card->size / (1024 * 1024)); + } + + if (sec_count > (2u * 1024 * 1024 * 1024) / 512) { + handle->device->ctrl.ocr |= SD_CARD_HIGH_CAPACITY; + handle->device->cfg.blockSize = 512; + } + + if (handle->device->ctrl.ocr & SD_CARD_HIGH_CAPACITY) { + EMMC_TRACE("Sector addressing\n"); + } else { + EMMC_TRACE("Byte addressing\n"); + } + + EMMC_TRACE("Ext_CSD_storage[162]: 0x%02X Ext_CSD_storage[179]: 0x%02X\n", + emmc_global_buf_ptr->u.Ext_CSD_storage[162], + emmc_global_buf_ptr->u.Ext_CSD_storage[179]); + } + + return handle->card->type; +} + + +/* + * The function send reset command to the card. + * The card will be in ready status after the reset. + */ +int reset_card(struct sd_handle *handle) +{ + int res = SD_OK; + + /* on reset, card's RCA should return to 0 */ + handle->device->ctrl.rca = 0; + + res = sd_cmd0(handle); + + if (res != SD_OK) + return SD_RESET_ERROR; + + return res; +} + + +/* + * The function sends command to the card and starts + * data transmission. + */ +static int xfer_data(struct sd_handle *handle, + uint32_t mode, + uint32_t addr, uint32_t length, uint8_t *base) +{ + int rc = SD_OK; + + VERBOSE("XFER: dest: 0x%" PRIx64 ", addr: 0x%x, size: 0x%x bytes\n", + (uint64_t)base, addr, length); + + if ((length / handle->device->cfg.blockSize) > 1) { + if (mode == SD_OP_READ) { + inv_dcache_range((uintptr_t)base, (uint64_t)length); + rc = sd_cmd18(handle, addr, length, base); + } else { +#ifdef INCLUDE_EMMC_DRIVER_WRITE_CODE + flush_dcache_range((uintptr_t)base, (uint64_t)length); + rc = sd_cmd25(handle, addr, length, base); +#else + rc = SD_DATA_XFER_ERROR; +#endif + } + } else { + if (mode == SD_OP_READ) { + inv_dcache_range((uintptr_t)base, (uint64_t)length); + rc = sd_cmd17(handle, addr, + handle->device->cfg.blockSize, base); + } else { +#ifdef INCLUDE_EMMC_DRIVER_WRITE_CODE + flush_dcache_range((uintptr_t)base, (uint64_t)length); + rc = sd_cmd24(handle, addr, + handle->device->cfg.blockSize, base); +#else + rc = SD_DATA_XFER_ERROR; +#endif + } + } + + if (rc != SD_OK) + return SD_DATA_XFER_ERROR; + + return SD_OK; +} + +#ifdef INCLUDE_EMMC_DRIVER_ERASE_CODE +int erase_card(struct sd_handle *handle, uint32_t addr, uint32_t blocks) +{ + uint32_t end_addr; + + INFO("ERASE: addr: 0x%x, num of sectors: 0x%x\n", addr, blocks); + + if (sd_cmd35(handle, addr) != SD_OK) + return SD_FAIL; + + end_addr = addr + blocks - 1; + if (sd_cmd36(handle, end_addr) != SD_OK) + return SD_FAIL; + + if (sd_cmd38(handle) != SD_OK) + return SD_FAIL; + + return SD_OK; +} +#endif + +/* + * The function reads block data from a card. + */ +#ifdef USE_EMMC_FIP_TOC_CACHE +int read_block(struct sd_handle *handle, + uint8_t *dst, uint32_t addr, uint32_t len) +{ + int rel = SD_OK; + + /* + * Avoid doing repeated reads of the partition block + * by caching. + */ + if (cached_partition_block && + addr == PARTITION_BLOCK_ADDR && + len == CACHE_SIZE) { + memcpy(dst, cached_block, len); + } else { + rel = xfer_data(handle, SD_OP_READ, addr, len, dst); + + if (len == CACHE_SIZE && addr == PARTITION_BLOCK_ADDR) { + cached_partition_block = 1; + memcpy(cached_block, dst, len); + } + } + + return rel; +} +#else +int read_block(struct sd_handle *handle, + uint8_t *dst, uint32_t addr, uint32_t len) +{ + return xfer_data(handle, SD_OP_READ, addr, len, dst); +} +#endif + +#ifdef INCLUDE_EMMC_DRIVER_WRITE_CODE + +/* + * The function writes block data to a card. + */ +int write_block(struct sd_handle *handle, + uint8_t *src, uint32_t addr, uint32_t len) +{ + int rel = SD_OK; + + /* + * Current HC has problem to get response of cmd16 after cmd12, + * the delay is necessary to sure the next cmd16 will not be timed out. + * The delay has to be at least 4 ms. + * The code removed cmd16 and use cmd13 to get card status before + * sending cmd18 or cmd25 to make sure the card is ready and thus + * no need to have delay here. + */ + + rel = xfer_data(handle, SD_OP_WRITE, addr, len, src); + + EMMC_TRACE("wr_blk addr:0x%08X src:0x%08X len:0x%08X result:%d\n", + addr, src, len, rel); + + return rel; +} + + +/* + * The function is called to write one block data directly to + * a card's data buffer. + * it is used in Non-DMA mode for card data transmission. + */ +int write_buffer(struct sd_handle *handle, uint32_t length, uint8_t *data) +{ + uint32_t rem, blockSize, event; + uint8_t *pData = data; + + blockSize = handle->device->cfg.blockSize; + rem = length; + + if (rem == 0) + return SD_OK; + + while (rem > 0) { + + event = wait_for_event(handle, + SD4_EMMC_TOP_INTR_BWRDY_MASK | + SD_ERR_INTERRUPTS, + handle->device->cfg.wfe_retry); + + if (handle->device->ctrl.cmdStatus) { + check_error(handle, handle->device->ctrl.cmdStatus); + return SD_WRITE_ERROR; + } + + if (rem >= blockSize) + chal_sd_write_buffer((CHAL_HANDLE *) handle->device, + blockSize, pData); + else + chal_sd_write_buffer((CHAL_HANDLE *) handle->device, + rem, pData); + + if (rem > blockSize) { + rem -= blockSize; + pData += blockSize; + } else { + pData += rem; + rem = 0; + } + } + + if ((event & SD4_EMMC_TOP_INTR_TXDONE_MASK) != + SD4_EMMC_TOP_INTR_TXDONE_MASK) { + event = wait_for_event(handle, + SD4_EMMC_TOP_INTR_TXDONE_MASK | + SD_ERR_INTERRUPTS, + handle->device->cfg.wfe_retry); + + if (handle->device->ctrl.cmdStatus != SD_OK) { + check_error(handle, handle->device->ctrl.cmdStatus); + return SD_WRITE_ERROR; + } + } else { + handle->device->ctrl.eventList &= ~SD4_EMMC_TOP_INTR_TXDONE_MASK; + } + + return SD_OK; +} +#endif /* INCLUDE_EMMC_DRIVER_WRITE_CODE */ + + +/* + * The function is called to read maximal one block data + * directly from a card + * It is used in Non-DMA mode for card data transmission. + */ +int read_buffer(struct sd_handle *handle, uint32_t length, uint8_t *data) +{ + uint32_t rem, blockSize, event = 0; + uint8_t *pData = data; + + blockSize = handle->device->cfg.blockSize; + rem = length; + + if (rem == 0) + return SD_OK; + + while (rem > 0) { + event = wait_for_event(handle, + SD4_EMMC_TOP_INTR_BRRDY_MASK | + SD_ERR_INTERRUPTS, + handle->device->cfg.wfe_retry); + + if (handle->device->ctrl.cmdStatus) { + check_error(handle, handle->device->ctrl.cmdStatus); + return SD_READ_ERROR; + } + + if (rem >= blockSize) + chal_sd_read_buffer((CHAL_HANDLE *) handle->device, + blockSize, pData); + else + chal_sd_read_buffer((CHAL_HANDLE *) handle->device, rem, + pData); + + if (rem > blockSize) { + rem -= blockSize; + pData += blockSize; + } else { + pData += rem; + rem = 0; + } + } + + /* In case, there are extra data in the SD FIFO, just dump them. */ + chal_sd_dump_fifo((CHAL_HANDLE *) handle->device); + + if ((event & SD4_EMMC_TOP_INTR_TXDONE_MASK) != + SD4_EMMC_TOP_INTR_TXDONE_MASK) { + event = wait_for_event(handle, SD4_EMMC_TOP_INTR_TXDONE_MASK, + handle->device->cfg.wfe_retry); + + if (handle->device->ctrl.cmdStatus) { + check_error(handle, handle->device->ctrl.cmdStatus); + return SD_READ_ERROR; + } + } else { + handle->device->ctrl.eventList &= ~SD4_EMMC_TOP_INTR_TXDONE_MASK; + } + + return SD_OK; +} + + +/* + * Error handling routine. + * The function just reset the DAT + * and CMD line if an error occures during data transmission. + */ +int check_error(struct sd_handle *handle, uint32_t ints) +{ + uint32_t rel; + + chal_sd_set_irq_signal((CHAL_HANDLE *) handle->device, + SD_ERR_INTERRUPTS, 0); + + if (ints & SD4_EMMC_TOP_INTR_CMDERROR_MASK) { + + chal_sd_reset_line((CHAL_HANDLE *) handle->device, + SD4_EMMC_TOP_CTRL1_CMDRST_MASK); + rel = abort_err(handle); + + chal_sd_reset_line((CHAL_HANDLE *) handle->device, + SD4_EMMC_TOP_CTRL1_DATRST_MASK); + chal_sd_set_irq_signal((CHAL_HANDLE *) handle->device, + SD_ERR_INTERRUPTS, 1); + + return (rel == SD_ERROR_NON_RECOVERABLE) ? + SD_ERROR_NON_RECOVERABLE : SD_ERROR_RECOVERABLE; + } else { + rel = err_recovery(handle, ints); + } + + chal_sd_set_irq_signal((CHAL_HANDLE *) handle->device, + SD_ERR_INTERRUPTS, 1); + + return rel; +} + + +/* + * Error recovery routine. + * Try to recover from the error. + */ +static int err_recovery(struct sd_handle *handle, uint32_t errors) +{ + uint32_t rel = 0; + + /* + * In case of timeout error, the cmd line and data line maybe + * still active or stuck at atcitve so it is needed to reset + * either data line or cmd line to make sure a new cmd can be sent. + */ + + if (errors & SD_CMD_ERROR_INT) + chal_sd_reset_line((CHAL_HANDLE *) handle->device, + SD4_EMMC_TOP_CTRL1_CMDRST_MASK); + + if (errors & SD_DAT_ERROR_INT) + chal_sd_reset_line((CHAL_HANDLE *) handle->device, + SD4_EMMC_TOP_CTRL1_DATRST_MASK); + + /* Abort transaction by sending out stop command */ + if ((handle->device->ctrl.cmdIndex == 18) || + (handle->device->ctrl.cmdIndex == 25)) + rel = abort_err(handle); + + return rel; +} + + +/* + * The function is called to read one block data directly from a card. + * It is used in Non-DMA mode for card data transmission. + */ +int process_cmd_response(struct sd_handle *handle, + uint32_t cmdIndex, + uint32_t rsp0, + uint32_t rsp1, + uint32_t rsp2, uint32_t rsp3, struct sd_resp *resp) +{ + int result = SD_OK; + + /* R6 */ + uint32_t rca = (rsp0 >> 16) & 0xffff; + uint32_t cardStatus = rsp0; + + /* R4 */ + uint32_t cBit = (rsp0 >> 31) & 0x1; + uint32_t funcs = (rsp0 >> 28) & 0x7; + uint32_t memPresent = (rsp0 >> 27) & 0x1; + + resp->r1 = 0x3f; + resp->cardStatus = cardStatus; + + if (cmdIndex == SD_CMD_IO_SEND_OP_COND) { + resp->data.r4.cardReady = cBit; + resp->data.r4.funcs = funcs; + resp->data.r4.memPresent = memPresent; + resp->data.r4.ocr = cardStatus; + } + + if (cmdIndex == SD_CMD_MMC_SET_RCA) { + resp->data.r6.rca = rca; + resp->data.r6.cardStatus = cardStatus & 0xFFFF; + } + + if (cmdIndex == SD_CMD_SELECT_DESELECT_CARD) { + resp->data.r7.rca = rca; + } + + if (cmdIndex == SD_CMD_IO_RW_DIRECT) { + if (((rsp0 >> 16) & 0xffff) != 0) + result = SD_CMD_ERR_INVALID_RESPONSE; + + resp->data.r5.data = rsp0 & 0xff; + } + + if (cmdIndex == SD_CMD_IO_RW_EXTENDED) { + if (((rsp0 >> 16) & 0xffff) != 0) + result = SD_CMD_ERR_INVALID_RESPONSE; + + resp->data.r5.data = rsp0 & 0xff; + } + + if (cmdIndex == SD_ACMD_SD_SEND_OP_COND || + cmdIndex == SD_CMD_SEND_OPCOND) + resp->data.r3.ocr = cardStatus; + + if (cmdIndex == SD_CMD_SEND_CSD || + cmdIndex == SD_CMD_SEND_CID || + cmdIndex == SD_CMD_ALL_SEND_CID) { + resp->data.r2.rsp4 = rsp3; + resp->data.r2.rsp3 = rsp2; + resp->data.r2.rsp2 = rsp1; + resp->data.r2.rsp1 = rsp0; + } + + if ((cmdIndex == SD_CMD_READ_EXT_CSD) && + (handle->card->type == SD_CARD_SD)) { + if ((resp->cardStatus & 0xAA) != 0xAA) { + result = SD_CMD_ERR_INVALID_RESPONSE; + } + } + + return result; +} + + +/* + * The function sets DMA buffer and data length, process + * block size and the number of blocks to be transferred. + * It returns the DMA buffer address. + * It copies dma data from user buffer to the DMA buffer + * if the operation is to write data to the SD card. + */ +void data_xfer_setup(struct sd_handle *handle, uint8_t *data, uint32_t length, + int dir) +{ + chal_sd_setup_xfer((CHAL_HANDLE *)handle->device, data, length, dir); +} + + +/* + * The function does soft reset the host SD controller. After + * the function call all host controller's register are reset + * to default vallue; + * + * Note This function only resets the host controller it does not + * reset the controller's handler. + */ +int reset_host_ctrl(struct sd_handle *handle) +{ + chal_sd_stop(); + + return SD_OK; +} + +static void pstate_log(struct sd_handle *handle) +{ + ERROR("PSTATE: 0x%x\n", mmio_read_32 + (handle->device->ctrl.sdRegBaseAddr + + SD4_EMMC_TOP_PSTATE_SD4_OFFSET)); + ERROR("ERRSTAT: 0x%x\n", mmio_read_32 + (handle->device->ctrl.sdRegBaseAddr + + SD4_EMMC_TOP_ERRSTAT_OFFSET)); +} + +/* + * The function waits for one or a group of interrupts specified + * by mask. The function returns if any one the interrupt status + * is set. If interrupt mode is not enabled then it will poll + * the interrupt status register until a interrupt status is set + * an error interrupt happens. If interrupt mode is enabled then + * this function should be called after the interrupt + * is received by ISR routine. + */ +uint32_t wait_for_event(struct sd_handle *handle, + uint32_t mask, uint32_t retry) +{ + uint32_t regval, cmd12, time = 0; + + handle->device->ctrl.cmdStatus = 0; /* no error */ + EMMC_TRACE("%s %d mask:0x%x timeout:%d irq_status:0x%x\n", + __func__, __LINE__, mask, retry, + chal_sd_get_irq_status((CHAL_HANDLE *)handle->device)); + + /* Polling mode */ + do { + regval = chal_sd_get_irq_status((CHAL_HANDLE *)handle->device); + + if (regval & SD4_EMMC_TOP_INTR_DMAIRQ_MASK) { + chal_sd_set_dma_addr((CHAL_HANDLE *)handle->device, + (uintptr_t) + chal_sd_get_dma_addr((CHAL_HANDLE *) + handle->device)); + chal_sd_clear_irq((CHAL_HANDLE *)handle->device, + SD4_EMMC_TOP_INTR_DMAIRQ_MASK); + } + + if (time++ > retry) { + ERROR("EMMC: No response (cmd%d) after %dus.\n", + handle->device->ctrl.cmdIndex, + time * EMMC_WFE_RETRY_DELAY_US); + handle->device->ctrl.cmdStatus = SD_CMD_MISSING; + pstate_log(handle); + ERROR("EMMC: INT[0x%x]\n", regval); + break; + } + + if (regval & SD4_EMMC_TOP_INTR_CTOERR_MASK) { + ERROR("EMMC: Cmd%d timeout INT[0x%x]\n", + handle->device->ctrl.cmdIndex, regval); + handle->device->ctrl.cmdStatus = + SD4_EMMC_TOP_INTR_CTOERR_MASK; + pstate_log(handle); + break; + } + if (regval & SD_CMD_ERROR_FLAGS) { + ERROR("EMMC: Cmd%d error INT[0x%x]\n", + handle->device->ctrl.cmdIndex, regval); + handle->device->ctrl.cmdStatus = SD_CMD_ERROR_FLAGS; + pstate_log(handle); + break; + } + + cmd12 = chal_sd_get_atuo12_error((CHAL_HANDLE *)handle->device); + if (cmd12) { + ERROR("EMMC: Cmd%d auto cmd12 err:0x%x\n", + handle->device->ctrl.cmdIndex, cmd12); + handle->device->ctrl.cmdStatus = cmd12; + pstate_log(handle); + break; + } + + if (SD_DATA_ERROR_FLAGS & regval) { + ERROR("EMMC: Data for cmd%d error, INT[0x%x]\n", + handle->device->ctrl.cmdIndex, regval); + handle->device->ctrl.cmdStatus = + (SD_DATA_ERROR_FLAGS & regval); + pstate_log(handle); + break; + } + + if ((regval & mask) == 0) + udelay(EMMC_WFE_RETRY_DELAY_US); + + } while ((regval & mask) == 0); + + /* clear the interrupt since it is processed */ + chal_sd_clear_irq((CHAL_HANDLE *)handle->device, (regval & mask)); + + return (regval & mask); +} + +int32_t set_config(struct sd_handle *handle, uint32_t speed, uint32_t retry, + uint32_t dma, uint32_t dmaBound, uint32_t blkSize, + uint32_t wfe_retry) +{ + int32_t rel = 0; + + if (handle == NULL) + return SD_FAIL; + + handle->device->cfg.wfe_retry = wfe_retry; + + rel = chal_sd_config((CHAL_HANDLE *)handle->device, speed, retry, + dmaBound, blkSize, dma); + return rel; + +} + +int mmc_cmd1(struct sd_handle *handle) +{ + uint32_t newOcr, res; + uint32_t cmd1_option = MMC_OCR_OP_VOLT | MMC_OCR_SECTOR_ACCESS_MODE; + + /* + * After Reset, eMMC comes up in 1 Bit Data Width by default. + * Set host side to match. + */ + chal_sd_config_bus_width((CHAL_HANDLE *) handle->device, + SD_BUS_DATA_WIDTH_1BIT); + +#ifdef USE_EMMC_FIP_TOC_CACHE + cached_partition_block = 0; +#endif + handle->device->ctrl.present = 0; /* init card present to be no card */ + + handle->card->type = SD_CARD_MMC; + + res = sd_cmd1(handle, cmd1_option, &newOcr); + + if (res != SD_OK) { + EMMC_TRACE("CMD1 Timeout: Device is not ready\n"); + res = SD_CARD_UNKNOWN; + } + return res; +} diff --git a/drivers/brcm/emmc/emmc_csl_sdcmd.c b/drivers/brcm/emmc/emmc_csl_sdcmd.c new file mode 100644 index 0000000..c62886c --- /dev/null +++ b/drivers/brcm/emmc/emmc_csl_sdcmd.c @@ -0,0 +1,842 @@ +/* + * Copyright (c) 2016 - 2020, Broadcom + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include +#include + +#include "bcm_emmc.h" +#include "emmc_chal_types.h" +#include "emmc_chal_sd.h" +#include "emmc_csl_sdprot.h" +#include "emmc_csl_sdcmd.h" +#include "emmc_csl_sd.h" +#include "emmc_chal_sd.h" +#include "emmc_pboot_hal_memory_drv.h" + +int sd_cmd0(struct sd_handle *handle) +{ + int res; + uint32_t argument = 0x0; /* Go to IDLE state. */ + + /* send cmd and parse result */ + res = send_cmd(handle, SD_CMD_GO_IDLE_STATE, argument, 0, NULL); + + if (res == SD_OK) { + /* Clear all other interrupts */ + chal_sd_clear_irq((void *)handle->device, 0xffffffff); + } + + return res; +} + +int sd_cmd1(struct sd_handle *handle, uint32_t ocr, uint32_t *ocr_output) +{ + int res; + uint32_t options; + struct sd_resp resp; + + options = SD_CMDR_RSP_TYPE_R3_4 << SD_CMDR_RSP_TYPE_S; + + if (ocr_output == NULL) { + EMMC_TRACE("Invalid args\n"); + return SD_FAIL; + } + + /* send cmd and parse result */ + res = send_cmd(handle, SD_CMD_SEND_OPCOND, ocr, options, &resp); + + if (res == SD_OK) + *ocr_output = resp.data.r3.ocr; + + return res; +} + +int sd_cmd2(struct sd_handle *handle) +{ + uint32_t options; + struct sd_resp resp; + + /* send cmd and parse result */ + options = SD_CMDR_RSP_TYPE_R2 << SD_CMDR_RSP_TYPE_S; + + return send_cmd(handle, SD_CMD_ALL_SEND_CID, 0, options, &resp); +} + +int sd_cmd3(struct sd_handle *handle) +{ + int res; + uint32_t options = 0; + uint32_t argument; + struct sd_resp resp; + + /* use non zero and non 0x1 value for rca */ + handle->device->ctrl.rca = 0x5; + argument = handle->device->ctrl.rca << SD_CMD7_ARG_RCA_SHIFT; + + options = SD_CMDR_RSP_TYPE_R1_5_6 << SD_CMDR_RSP_TYPE_S | + SD4_EMMC_TOP_CMD_CCHK_EN_MASK | + SD4_EMMC_TOP_CMD_CRC_EN_MASK; + + /* send cmd and parse result */ + res = send_cmd(handle, SD_CMD_MMC_SET_RCA, argument, options, &resp); + + if (res != SD_OK) + handle->device->ctrl.rca = 0; + + return res; +} + +int sd_cmd7(struct sd_handle *handle, uint32_t rca) +{ + int res; + uint32_t argument, options; + struct sd_resp resp; + + argument = (rca << SD_CMD7_ARG_RCA_SHIFT); + + /* + * Response to CMD7 is: + * R1 while selectiing from Stand-By State to Transfer State + * R1b while selecting from Disconnected State to Programming State. + * + * In this driver, we only issue a CMD7 once, to go to transfer mode + * during init_mmc_card(). + */ + options = SD_CMDR_RSP_TYPE_R1_5_6 << SD_CMDR_RSP_TYPE_S | + SD4_EMMC_TOP_CMD_CCHK_EN_MASK | + SD4_EMMC_TOP_CMD_CRC_EN_MASK; + + /* send cmd and parse result */ + res = send_cmd(handle, SD_CMD_SELECT_DESELECT_CARD, argument, options, + &resp); + + if (res == SD_OK) + /* Clear all other interrupts */ + chal_sd_clear_irq((void *)handle->device, 0xffffffff); + + return res; +} + + +/* + * CMD8 Get CSD_EXT + */ +int mmc_cmd8(struct sd_handle *handle, uint8_t *extCsdReg) +{ + uint32_t res, options; + struct sd_resp resp; + + data_xfer_setup(handle, extCsdReg, CEATA_EXT_CSDBLOCK_SIZE, + SD_XFER_CARD_TO_HOST); + + options = SD_CMDR_RSP_TYPE_R1_5_6 << SD_CMDR_RSP_TYPE_S | + SD4_EMMC_TOP_CMD_DPS_MASK | SD4_EMMC_TOP_CMD_DTDS_MASK | + SD4_EMMC_TOP_CMD_CCHK_EN_MASK | SD4_EMMC_TOP_CMD_CRC_EN_MASK; + + /* send cmd and parse result */ + res = send_cmd(handle, SD_CMD_READ_EXT_CSD, 0, options, &resp); + + if (res == SD_OK) + res = process_data_xfer(handle, extCsdReg, 0, + CEATA_EXT_CSDBLOCK_SIZE, + SD_XFER_CARD_TO_HOST); + + return res; +} + +int sd_cmd9(struct sd_handle *handle, struct sd_card_data *card) +{ + int res; + uint32_t argument, options, iBlkNum, multiFactor = 1; + uint32_t maxReadBlockLen = 1, maxWriteBlockLen = 1; + struct sd_resp resp; + + argument = handle->device->ctrl.rca << SD_CMD7_ARG_RCA_SHIFT; + + options = SD_CMDR_RSP_TYPE_R2 << SD_CMDR_RSP_TYPE_S | + SD4_EMMC_TOP_CMD_CRC_EN_MASK; + + /* send cmd and parse result */ + res = send_cmd(handle, SD_CMD_SEND_CSD, argument, options, &resp); + + if (res != SD_OK) + return res; + + if (handle->card->type == SD_CARD_MMC) { + card->csd.mmc.structure = (resp.data.r2.rsp4 >> 22) & 0x3; + card->csd.mmc.csdSpecVer = (resp.data.r2.rsp4 >> 18) & 0x0f; + card->csd.mmc.taac = (resp.data.r2.rsp4 >> 8) & 0xff; + card->csd.mmc.nsac = resp.data.r2.rsp4 & 0xff; + card->csd.mmc.speed = resp.data.r2.rsp3 >> 24; + card->csd.mmc.classes = (resp.data.r2.rsp3 >> 12) & 0xfff; + card->csd.mmc.rdBlkLen = (resp.data.r2.rsp3 >> 8) & 0xf; + card->csd.mmc.rdBlkPartial = (resp.data.r2.rsp3 >> 7) & 0x01; + card->csd.mmc.wrBlkMisalign = (resp.data.r2.rsp3 >> 6) & 0x1; + card->csd.mmc.rdBlkMisalign = (resp.data.r2.rsp3 >> 5) & 0x1; + card->csd.mmc.dsr = (resp.data.r2.rsp2 >> 4) & 0x01; + card->csd.mmc.size = + ((resp.data.r2.rsp3 & 0x3) << 10) + + ((resp.data.r2.rsp2 >> 22) & 0x3ff); + card->csd.mmc.vddRdCurrMin = (resp.data.r2.rsp2 >> 19) & 0x7; + card->csd.mmc.vddRdCurrMax = (resp.data.r2.rsp2 >> 16) & 0x7; + card->csd.mmc.vddWrCurrMin = (resp.data.r2.rsp2 >> 13) & 0x7; + card->csd.mmc.vddWrCurrMax = (resp.data.r2.rsp2 >> 10) & 0x7; + card->csd.mmc.devSizeMulti = (resp.data.r2.rsp2 >> 7) & 0x7; + card->csd.mmc.eraseGrpSize = (resp.data.r2.rsp2 >> 2) & 0x1f; + card->csd.mmc.eraseGrpSizeMulti = + ((resp.data.r2.rsp2 & 0x3) << 3) + + ((resp.data.r2.rsp1 >> 29) & 0x7); + card->csd.mmc.wrProtGroupSize = + ((resp.data.r2.rsp1 >> 24) & 0x1f); + card->csd.mmc.wrProtGroupEnable = + (resp.data.r2.rsp1 >> 23) & 0x1; + card->csd.mmc.manuDefEcc = (resp.data.r2.rsp1 >> 21) & 0x3; + card->csd.mmc.wrSpeedFactor = (resp.data.r2.rsp1 >> 18) & 0x7; + card->csd.mmc.wrBlkLen = (resp.data.r2.rsp1 >> 14) & 0xf; + card->csd.mmc.wrBlkPartial = (resp.data.r2.rsp1 >> 13) & 0x1; + card->csd.mmc.protAppl = (resp.data.r2.rsp1 >> 8) & 0x1; + card->csd.mmc.copyFlag = (resp.data.r2.rsp1 >> 7) & 0x1; + card->csd.mmc.permWrProt = (resp.data.r2.rsp1 >> 6) & 0x1; + card->csd.mmc.tmpWrProt = (resp.data.r2.rsp1 >> 5) & 0x1; + card->csd.mmc.fileFormat = (resp.data.r2.rsp1 >> 4) & 0x03; + card->csd.mmc.eccCode = resp.data.r2.rsp1 & 0x03; + maxReadBlockLen <<= card->csd.mmc.rdBlkLen; + maxWriteBlockLen <<= card->csd.mmc.wrBlkLen; + + iBlkNum = card->csd.mmc.size + 1; + multiFactor = (1 << (card->csd.mmc.devSizeMulti + 2)); + + handle->card->size = + iBlkNum * multiFactor * (1 << card->csd.mmc.rdBlkLen); + } + + handle->card->maxRdBlkLen = maxReadBlockLen; + handle->card->maxWtBlkLen = maxWriteBlockLen; + + if (handle->card->size < 0xA00000) { + /* + * 10MB Too small size mean, cmd9 response is wrong, + * Use default value 1G + */ + handle->card->size = 0x40000000; + handle->card->maxRdBlkLen = 512; + handle->card->maxWtBlkLen = 512; + } + + if ((handle->card->maxRdBlkLen > 512) || + (handle->card->maxWtBlkLen > 512)) { + handle->card->maxRdBlkLen = 512; + handle->card->maxWtBlkLen = 512; + } else if ((handle->card->maxRdBlkLen == 0) || + (handle->card->maxWtBlkLen == 0)) { + handle->card->maxRdBlkLen = 512; + handle->card->maxWtBlkLen = 512; + } + + handle->device->cfg.blockSize = handle->card->maxRdBlkLen; + + return res; +} + +int sd_cmd13(struct sd_handle *handle, uint32_t *status) +{ + int res; + uint32_t argument, options; + struct sd_resp resp; + + argument = handle->device->ctrl.rca << SD_CMD7_ARG_RCA_SHIFT; + + options = SD_CMDR_RSP_TYPE_R1_5_6 << SD_CMDR_RSP_TYPE_S | + SD4_EMMC_TOP_CMD_CCHK_EN_MASK | + SD4_EMMC_TOP_CMD_CRC_EN_MASK; + + /* send cmd and parse result */ + res = send_cmd(handle, SD_CMD_SEND_STATUS, argument, options, &resp); + + if (res == SD_OK) { + *status = resp.cardStatus; + } + + return res; +} + +int sd_cmd16(struct sd_handle *handle, uint32_t length) +{ + int res; + uint32_t argument, options, ntry; + struct sd_resp resp; + + argument = length; + + options = SD_CMDR_RSP_TYPE_R1_5_6 << SD_CMDR_RSP_TYPE_S | + SD4_EMMC_TOP_CMD_CRC_EN_MASK | + SD4_EMMC_TOP_CMD_CCHK_EN_MASK; + + ntry = 0; + do { + res = sd_cmd13(handle, &resp.cardStatus); + if (res != SD_OK) { + EMMC_TRACE( + "cmd13 failed before cmd16: rca 0x%0x, return %d, response 0x%0x\n", + handle->device->ctrl.rca, res, resp.cardStatus); + return res; + } + + if (resp.cardStatus & 0x100) + break; + + EMMC_TRACE("cmd13 rsp:0x%08x before cmd16\n", resp.cardStatus); + + if (ntry > handle->device->cfg.retryLimit) { + EMMC_TRACE("cmd13 retry reach limit %d\n", + handle->device->cfg.retryLimit); + return SD_CMD_TIMEOUT; + } + + ntry++; + EMMC_TRACE("cmd13 retry %d\n", ntry); + + SD_US_DELAY(1000); + + } while (1); + + /* send cmd and parse result */ + res = send_cmd(handle, SD_CMD_SET_BLOCKLEN, argument, options, &resp); + + return res; +} + +int sd_cmd17(struct sd_handle *handle, + uint32_t addr, uint32_t len, uint8_t *buffer) +{ + int res; + uint32_t argument, options, ntry; + struct sd_resp resp; + + ntry = 0; + do { + res = sd_cmd13(handle, &resp.cardStatus); + if (res != SD_OK) { + EMMC_TRACE( + "cmd 13 failed before cmd17: rca 0x%0x, return %d, response 0x%0x\n", + handle->device->ctrl.rca, res, resp.cardStatus); + return res; + } + + if (resp.cardStatus & 0x100) + break; + + EMMC_TRACE("cmd13 rsp:0x%08x before cmd17\n", resp.cardStatus); + + if (ntry > handle->device->cfg.retryLimit) { + EMMC_TRACE("cmd13 retry reach limit %d\n", + handle->device->cfg.retryLimit); + return SD_CMD_TIMEOUT; + } + + ntry++; + EMMC_TRACE("cmd13 retry %d\n", ntry); + + SD_US_DELAY(1000); + + } while (1); + + data_xfer_setup(handle, buffer, len, SD_XFER_CARD_TO_HOST); + + /* send cmd and parse result */ + argument = addr; + options = SD_CMDR_RSP_TYPE_R1_5_6 << SD_CMDR_RSP_TYPE_S | + SD4_EMMC_TOP_CMD_DPS_MASK | SD4_EMMC_TOP_CMD_DTDS_MASK | + SD4_EMMC_TOP_CMD_CRC_EN_MASK | SD4_EMMC_TOP_CMD_CCHK_EN_MASK; + + res = send_cmd(handle, SD_CMD_READ_SINGLE_BLOCK, argument, options, + &resp); + + if (res != SD_OK) + return res; + + res = process_data_xfer(handle, buffer, addr, len, SD_XFER_CARD_TO_HOST); + + return res; +} + +int sd_cmd18(struct sd_handle *handle, + uint32_t addr, uint32_t len, uint8_t *buffer) +{ + int res; + uint32_t argument, options, ntry; + struct sd_resp resp; + + ntry = 0; + do { + res = sd_cmd13(handle, &resp.cardStatus); + if (res != SD_OK) { + EMMC_TRACE( + "cmd 13 failed before cmd18: rca 0x%0x, return %d, response 0x%0x\n", + handle->device->ctrl.rca, res, resp.cardStatus); + return res; + } + + if (resp.cardStatus & 0x100) + break; + + EMMC_TRACE("cmd13 rsp:0x%08x before cmd18\n", resp.cardStatus); + + if (ntry > handle->device->cfg.retryLimit) { + EMMC_TRACE("cmd13 retry reach limit %d\n", + handle->device->cfg.retryLimit); + return SD_CMD_TIMEOUT; + } + + ntry++; + EMMC_TRACE("cmd13 retry %d\n", ntry); + + SD_US_DELAY(1000); + } while (1); + + data_xfer_setup(handle, buffer, len, SD_XFER_CARD_TO_HOST); + + argument = addr; + + options = SD_CMDR_RSP_TYPE_R1_5_6 << SD_CMDR_RSP_TYPE_S | + SD4_EMMC_TOP_CMD_DPS_MASK | SD4_EMMC_TOP_CMD_DTDS_MASK | + SD4_EMMC_TOP_CMD_MSBS_MASK | SD4_EMMC_TOP_CMD_CCHK_EN_MASK | + SD4_EMMC_TOP_CMD_BCEN_MASK | SD4_EMMC_TOP_CMD_CRC_EN_MASK | + BIT(SD4_EMMC_TOP_CMD_ACMDEN_SHIFT); + + /* send cmd and parse result */ + res = send_cmd(handle, SD_CMD_READ_MULTIPLE_BLOCK, argument, options, + &resp); + + if (res != SD_OK) + return res; + + res = process_data_xfer(handle, buffer, addr, len, SD_XFER_CARD_TO_HOST); + + return res; +} + +#ifdef INCLUDE_EMMC_DRIVER_ERASE_CODE +static int card_sts_resp(struct sd_handle *handle, uint32_t *status) +{ + int res; + uint32_t ntry = 0; + + do { + res = sd_cmd13(handle, status); + if (res != SD_OK) { + EMMC_TRACE( + "cmd 13 failed before cmd35: rca 0x%0x, return %d\n", + handle->device->ctrl.rca, res); + return res; + } + + if (*status & 0x100) + break; + + EMMC_TRACE("cmd13 rsp:0x%08x before cmd35\n", resp.cardStatus); + + if (ntry > handle->device->cfg.retryLimit) { + EMMC_TRACE("cmd13 retry reach limit %d\n", + handle->device->cfg.retryLimit); + return SD_CMD_TIMEOUT; + } + + ntry++; + EMMC_TRACE("cmd13 retry %d\n", ntry); + + SD_US_DELAY(1000); + } while (1); + + return SD_OK; +} + +int sd_cmd35(struct sd_handle *handle, uint32_t start) +{ + int res; + uint32_t argument, options; + struct sd_resp resp; + + res = card_sts_resp(handle, &resp.cardStatus); + if (res != SD_OK) + return res; + + argument = start; + + options = SD_CMDR_RSP_TYPE_R1_5_6 << SD_CMDR_RSP_TYPE_S | + SD4_EMMC_TOP_CMD_CRC_EN_MASK | + SD4_EMMC_TOP_CMD_CCHK_EN_MASK; + + /* send cmd and parse result */ + res = send_cmd(handle, SD_CMD_ERASE_GROUP_START, + argument, options, &resp); + + if (res != SD_OK) + return res; + + return res; +} + +int sd_cmd36(struct sd_handle *handle, uint32_t end) +{ + int res; + uint32_t argument, options; + struct sd_resp resp; + + res = card_sts_resp(handle, &resp.cardStatus); + if (res != SD_OK) + return res; + + argument = end; + + options = SD_CMDR_RSP_TYPE_R1_5_6 << SD_CMDR_RSP_TYPE_S | + SD4_EMMC_TOP_CMD_CRC_EN_MASK | + SD4_EMMC_TOP_CMD_CCHK_EN_MASK; + + /* send cmd and parse result */ + res = send_cmd(handle, SD_CMD_ERASE_GROUP_END, + argument, options, &resp); + + if (res != SD_OK) + return res; + + return res; +} + +int sd_cmd38(struct sd_handle *handle) +{ + int res; + uint32_t argument, options; + struct sd_resp resp; + + res = card_sts_resp(handle, &resp.cardStatus); + if (res != SD_OK) + return res; + + argument = 0; + + options = (SD_CMDR_RSP_TYPE_R1b_5b << SD_CMDR_RSP_TYPE_S) | + SD4_EMMC_TOP_CMD_CRC_EN_MASK | + SD4_EMMC_TOP_CMD_CCHK_EN_MASK; + + /* send cmd and parse result */ + res = send_cmd(handle, SD_CMD_ERASE, argument, options, &resp); + + if (res != SD_OK) + return res; + + return res; +} +#endif + +#ifdef INCLUDE_EMMC_DRIVER_WRITE_CODE + +int sd_cmd24(struct sd_handle *handle, + uint32_t addr, uint32_t len, uint8_t *buffer) +{ + int res; + uint32_t argument, options, ntry; + struct sd_resp resp; + + ntry = 0; + do { + res = sd_cmd13(handle, &resp.cardStatus); + if (res != SD_OK) { + EMMC_TRACE( + "cmd 13 failed before cmd24: rca 0x%0x, return %d, response 0x%0x\n", + handle->device->ctrl.rca, res, &resp.cardStatus); + return res; + } + + if (resp.cardStatus & 0x100) + break; + + EMMC_TRACE("cmd13 rsp:0x%08x before cmd24\n", resp.cardStatus); + + if (ntry > handle->device->cfg.retryLimit) { + EMMC_TRACE("cmd13 retry reach limit %d\n", + handle->device->cfg.retryLimit); + return SD_CMD_TIMEOUT; + } + + ntry++; + EMMC_TRACE("cmd13 retry %d\n", ntry); + + SD_US_DELAY(1000); + + } while (1); + + data_xfer_setup(handle, buffer, len, SD_XFER_HOST_TO_CARD); + + argument = addr; + + options = SD_CMDR_RSP_TYPE_R1_5_6 << SD_CMDR_RSP_TYPE_S | + SD4_EMMC_TOP_CMD_DPS_MASK | SD4_EMMC_TOP_CMD_CRC_EN_MASK | + SD4_EMMC_TOP_CMD_CCHK_EN_MASK; + + /* send cmd and parse result */ + res = send_cmd(handle, SD_CMD_WRITE_BLOCK, argument, options, &resp); + + if (res != SD_OK) + return res; + + res = process_data_xfer(handle, buffer, addr, len, SD_XFER_HOST_TO_CARD); + + return res; +} + +int sd_cmd25(struct sd_handle *handle, + uint32_t addr, uint32_t len, uint8_t *buffer) +{ + int res = SD_OK; + uint32_t argument, options, ntry; + struct sd_resp resp; + + ntry = 0; + do { + res = sd_cmd13(handle, &resp.cardStatus); + if (res != SD_OK) { + EMMC_TRACE( + "cmd 13 failed before cmd25: rca 0x%0x, return %d, response 0x%0x\n", + handle->device->ctrl.rca, res, &resp.cardStatus); + return res; + } + + if (resp.cardStatus & 0x100) + break; + + EMMC_TRACE("cmd13 rsp:0x%08x before cmd25\n", resp.cardStatus); + + if (ntry > handle->device->cfg.retryLimit) { + EMMC_TRACE("cmd13 retry reach limit %d\n", + handle->device->cfg.retryLimit); + return SD_CMD_TIMEOUT; + } + + ntry++; + EMMC_TRACE("cmd13 retry %d\n", ntry); + + SD_US_DELAY(1000); + } while (1); + + data_xfer_setup(handle, buffer, len, SD_XFER_HOST_TO_CARD); + + argument = addr; + + options = SD_CMDR_RSP_TYPE_R1_5_6 << SD_CMDR_RSP_TYPE_S | + SD4_EMMC_TOP_CMD_DPS_MASK | SD4_EMMC_TOP_CMD_MSBS_MASK | + SD4_EMMC_TOP_CMD_CCHK_EN_MASK | SD4_EMMC_TOP_CMD_BCEN_MASK | + SD4_EMMC_TOP_CMD_CRC_EN_MASK | + BIT(SD4_EMMC_TOP_CMD_ACMDEN_SHIFT); + + /* send cmd and parse result */ + res = send_cmd(handle, SD_CMD_WRITE_MULTIPLE_BLOCK, + argument, options, &resp); + + if (res != SD_OK) + return res; + + res = process_data_xfer(handle, buffer, addr, len, SD_XFER_HOST_TO_CARD); + + return res; +} +#endif /* INCLUDE_EMMC_DRIVER_WRITE_CODE */ + +int mmc_cmd6(struct sd_handle *handle, uint32_t argument) +{ + int res; + uint32_t options; + struct sd_resp resp; + + options = SD_CMDR_RSP_TYPE_R1b_5b << SD_CMDR_RSP_TYPE_S | + SD4_EMMC_TOP_CMD_CCHK_EN_MASK | SD4_EMMC_TOP_CMD_CRC_EN_MASK; + + EMMC_TRACE("Sending CMD6 with argument 0x%X\n", argument); + + /* send cmd and parse result */ + res = send_cmd(handle, SD_ACMD_SET_BUS_WIDTH, argument, options, &resp); + + /* + * For R1b type response: + * controller issues a COMMAND COMPLETE interrupt when the R1 + * response is received, + * then controller monitors DAT0 for busy status, + * controller issues a TRANSFER COMPLETE interrupt when busy signal + * clears. + */ + wait_for_event(handle, + SD4_EMMC_TOP_INTR_TXDONE_MASK | SD_ERR_INTERRUPTS, + handle->device->cfg.wfe_retry); + + if (res == SD_OK) { + /* Check result of Cmd6 using Cmd13 to check card status */ + + /* Check status using Cmd13 */ + res = sd_cmd13(handle, &resp.cardStatus); + + if (res == SD_OK) { + /* Check bit 7 (SWITCH_ERROR) in card status */ + if ((resp.cardStatus & 0x80) != 0) { + EMMC_TRACE("cmd6 failed: SWITCH_ERROR\n"); + res = SD_FAIL; + } + } else { + EMMC_TRACE("cmd13 failed after cmd6: "); + EMMC_TRACE("rca 0x%0x, return %d, response 0x%0x\n", + handle->device->ctrl.rca, res, resp.cardStatus); + } + } + + return res; +} + + +#define SD_BUSY_CHECK 0x00203000 +#define DAT0_LEVEL_MASK 0x100000 /* bit20 in PSTATE */ +#define DEV_BUSY_TIMEOUT 600000 /* 60 Sec : 600000 * 100us */ + +int send_cmd(struct sd_handle *handle, uint32_t cmdIndex, uint32_t argument, + uint32_t options, struct sd_resp *resp) +{ + int status = SD_OK; + uint32_t event = 0, present, timeout = 0, retry = 0, mask = 3; + uint32_t temp_resp[4]; + + if (handle == NULL) { + EMMC_TRACE("Invalid handle for cmd%d\n", cmdIndex); + return SD_INVALID_HANDLE; + } + + mask = (SD_BUSY_CHECK & options) ? 3 : 1; + +RETRY_WRITE_CMD: + do { + /* Make sure it is ok to send command */ + present = + chal_sd_get_present_status((CHAL_HANDLE *) handle->device); + timeout++; + + if (present & mask) + SD_US_DELAY(1000); + else + break; + + } while (timeout < EMMC_BUSY_CMD_TIMEOUT_MS); + + if (timeout >= EMMC_BUSY_CMD_TIMEOUT_MS) { + status = SD_CMD_MISSING; + EMMC_TRACE("cmd%d timedout %dms\n", cmdIndex, timeout); + } + + /* Reset both DAT and CMD line if only of them are stuck */ + if (present & mask) + check_error(handle, SD4_EMMC_TOP_INTR_CMDERROR_MASK); + + handle->device->ctrl.argReg = argument; + chal_sd_send_cmd((CHAL_HANDLE *) handle->device, cmdIndex, + handle->device->ctrl.argReg, options); + + handle->device->ctrl.cmdIndex = cmdIndex; + + event = wait_for_event(handle, + (SD4_EMMC_TOP_INTR_CMDDONE_MASK | + SD_ERR_INTERRUPTS), + handle->device->cfg.wfe_retry); + + if (handle->device->ctrl.cmdStatus == SD_CMD_MISSING) { + retry++; + + if (retry >= handle->device->cfg.retryLimit) { + status = SD_CMD_MISSING; + EMMC_TRACE("cmd%d retry reaches the limit %d\n", + cmdIndex, retry); + } else { + /* reset both DAT & CMD line if one of them is stuck */ + present = chal_sd_get_present_status((CHAL_HANDLE *) + handle->device); + + if (present & mask) + check_error(handle, + SD4_EMMC_TOP_INTR_CMDERROR_MASK); + + EMMC_TRACE("cmd%d retry %d PSTATE[0x%08x]\n", + cmdIndex, retry, + chal_sd_get_present_status((CHAL_HANDLE *) + handle->device)); + goto RETRY_WRITE_CMD; + } + } + + if (handle->device->ctrl.cmdStatus == SD_OK) { + if (resp != NULL) { + status = + chal_sd_get_response((CHAL_HANDLE *) handle->device, + temp_resp); + process_cmd_response(handle, + handle->device->ctrl.cmdIndex, + temp_resp[0], temp_resp[1], + temp_resp[2], temp_resp[3], resp); + } + + /* Check Device busy after CMD */ + if ((cmdIndex == 5) || (cmdIndex == 6) || (cmdIndex == 7) || + (cmdIndex == 28) || (cmdIndex == 29) || (cmdIndex == 38)) { + + timeout = 0; + do { + present = + chal_sd_get_present_status((CHAL_HANDLE *) + handle->device); + + timeout++; + + /* Dat[0]:bit20 low means device busy */ + if ((present & DAT0_LEVEL_MASK) == 0) { + EMMC_TRACE("Device busy: "); + EMMC_TRACE( + "cmd%d arg:0x%08x: PSTATE[0x%08x]\n", + cmdIndex, argument, present); + SD_US_DELAY(100); + } else { + break; + } + } while (timeout < DEV_BUSY_TIMEOUT); + } + } else if (handle->device->ctrl.cmdStatus && + handle->device->ctrl.cmdStatus != SD_CMD_MISSING) { + retry++; + status = check_error(handle, handle->device->ctrl.cmdStatus); + + EMMC_TRACE( + "cmd%d error: cmdStatus:0x%08x error_status:0x%08x\n", + cmdIndex, handle->device->ctrl.cmdStatus, status); + + if ((handle->device->ctrl.cmdIndex == 1) || + (handle->device->ctrl.cmdIndex == 5)) { + status = event; + } else if ((handle->device->ctrl.cmdIndex == 7) || + (handle->device->ctrl.cmdIndex == 41)) { + status = event; + } else if ((status == SD_ERROR_RECOVERABLE) && + (retry < handle->device->cfg.retryLimit)) { + EMMC_TRACE("cmd%d recoverable error ", cmdIndex); + EMMC_TRACE("retry %d PSTATE[0x%08x].\n", retry, + chal_sd_get_present_status((CHAL_HANDLE *) + handle->device)); + goto RETRY_WRITE_CMD; + } else { + EMMC_TRACE("cmd%d retry reaches the limit %d\n", + cmdIndex, retry); + status = event; + } + } + + handle->device->ctrl.blkReg = 0; + /* clear error status for next command */ + handle->device->ctrl.cmdStatus = 0; + + return status; +} diff --git a/drivers/brcm/emmc/emmc_pboot_hal_memory_drv.c b/drivers/brcm/emmc/emmc_pboot_hal_memory_drv.c new file mode 100644 index 0000000..fcd499f --- /dev/null +++ b/drivers/brcm/emmc/emmc_pboot_hal_memory_drv.c @@ -0,0 +1,631 @@ +/* + * Copyright (c) 2016 - 2020, Broadcom + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include + +#include +#include + +#define MAX_CMD_RETRY 10 + +#if EMMC_USE_DMA +#define USE_DMA 1 +#else +#define USE_DMA 0 +#endif + +struct emmc_global_buffer emmc_global_buf; +struct emmc_global_buffer *emmc_global_buf_ptr = &emmc_global_buf; + +struct emmc_global_vars emmc_global_vars; +struct emmc_global_vars *emmc_global_vars_ptr = &emmc_global_vars; + +static struct sd_handle *sdio_gethandle(void); +static uint32_t sdio_idle(struct sd_handle *p_sdhandle); + +static uint32_t sdio_read(struct sd_handle *p_sdhandle, + uintptr_t mem_addr, + uintptr_t storage_addr, + size_t storage_size, + size_t bytes_to_read); + +#ifdef INCLUDE_EMMC_DRIVER_WRITE_CODE +static uint32_t sdio_write(struct sd_handle *p_sdhandle, + uintptr_t mem_addr, + uintptr_t data_addr, + size_t bytes_to_write); +#endif + +static struct sd_handle *sdio_init(void); +static int32_t bcm_emmc_card_ready_state(struct sd_handle *p_sdhandle); + +static void init_globals(void) +{ + memset((void *)emmc_global_buf_ptr, 0, sizeof(*emmc_global_buf_ptr)); + memset((void *)emmc_global_vars_ptr, 0, sizeof(*emmc_global_vars_ptr)); +} + +/* + * This function is used to change partition + */ +uint32_t emmc_partition_select(uint32_t partition) +{ + int rc; + struct sd_handle *sd_handle = sdio_gethandle(); + + if (sd_handle->device == 0) { + EMMC_TRACE("eMMC init is not done"); + return 0; + } + + switch (partition) { + case EMMC_BOOT_PARTITION1: + rc = set_boot_config(sd_handle, + SDIO_HW_EMMC_EXT_CSD_BOOT_ACC_BOOT1); + EMMC_TRACE( + "Change to Boot Partition 1 result:%d (0 means SD_OK)\n", + rc); + break; + + case EMMC_BOOT_PARTITION2: + rc = set_boot_config(sd_handle, + SDIO_HW_EMMC_EXT_CSD_BOOT_ACC_BOOT2); + EMMC_TRACE( + "Change to Boot Partition 2 result:%d (0 means SD_OK)\n", + rc); + break; + + case EMMC_USE_CURRENT_PARTITION: + rc = SD_OK; + EMMC_TRACE("Stay on current partition"); + break; + + case EMMC_USER_AREA: + default: + rc = set_boot_config(sd_handle, + SDIO_HW_EMMC_EXT_CSD_BOOT_ACC_USER); + EMMC_TRACE("Change to User area result:%d (0 means SD_OK)\n", + rc); + break; + + } + return (rc == SD_OK); +} + +/* + * Initialize emmc controller for eMMC + * Returns 0 on fail condition + */ +uint32_t bcm_emmc_init(bool card_rdy_only) +{ + struct sd_handle *p_sdhandle; + uint32_t result = 0; + + EMMC_TRACE("Enter emmc_controller_init()\n"); + + /* If eMMC is already initialized, skip init */ + if (emmc_global_vars_ptr->init_done) + return 1; + + init_globals(); + + p_sdhandle = sdio_init(); + + if (p_sdhandle == NULL) { + ERROR("eMMC init failed"); + return result; + } + + if (card_rdy_only) { + /* Put the card in Ready state, Not complete init */ + result = bcm_emmc_card_ready_state(p_sdhandle); + return !result; + } + + if (sdio_idle(p_sdhandle) == EMMC_BOOT_OK) { + set_config(p_sdhandle, SD_NORMAL_SPEED, MAX_CMD_RETRY, USE_DMA, + SD_DMA_BOUNDARY_256K, EMMC_BLOCK_SIZE, + EMMC_WFE_RETRY); + + if (!select_blk_sz(p_sdhandle, + p_sdhandle->device->cfg.blockSize)) { + emmc_global_vars_ptr->init_done = 1; + result = 1; + } else { + ERROR("Select Block Size failed\n"); + } + } else { + ERROR("eMMC init failed"); + } + + /* Initialization is failed, so deinit HW setting */ + if (result == 0) + emmc_deinit(); + + return result; +} + +/* + * Function to de-init SDIO controller for eMMC + */ +void emmc_deinit(void) +{ + emmc_global_vars_ptr->init_done = 0; + emmc_global_vars_ptr->sdHandle.card = 0; + emmc_global_vars_ptr->sdHandle.device = 0; +} + +/* + * Read eMMC memory + * Returns read_size + */ +uint32_t emmc_read(uintptr_t mem_addr, uintptr_t storage_addr, + size_t storage_size, size_t bytes_to_read) +{ + struct sd_handle *sd_handle = sdio_gethandle(); + + if (sd_handle->device == 0) { + EMMC_TRACE("eMMC init is not done"); + return 0; + } + + return sdio_read(sdio_gethandle(), mem_addr, storage_addr, + storage_size, bytes_to_read); +} + +#ifdef INCLUDE_EMMC_DRIVER_ERASE_CODE +#define EXT_CSD_ERASE_GRP_SIZE 224 + +static int emmc_block_erase(uintptr_t mem_addr, size_t blocks) +{ + struct sd_handle *sd_handle = sdio_gethandle(); + + if (sd_handle->device == 0) { + ERROR("eMMC init is not done"); + return -1; + } + + return erase_card(sdio_gethandle(), mem_addr, blocks); +} + +int emmc_erase(uintptr_t mem_addr, size_t num_of_blocks, uint32_t partition) +{ + int err = 0; + size_t block_count = 0, blocks = 0; + size_t erase_group = 0; + + erase_group = + emmc_global_buf_ptr->u.Ext_CSD_storage[EXT_CSD_ERASE_GRP_SIZE]*1024; + + INFO("eMMC Erase Group Size=0x%lx\n", erase_group); + + emmc_partition_select(partition); + + while (block_count < num_of_blocks) { + blocks = ((num_of_blocks - block_count) > erase_group) ? + erase_group : (num_of_blocks - block_count); + err = emmc_block_erase(mem_addr + block_count, blocks); + if (err) + break; + + block_count += blocks; + } + + if (err == 0) + INFO("eMMC Erase of partition %d successful\n", partition); + else + ERROR("eMMC Erase of partition %d Failed(%i)\n", partition, err); + + return err; +} +#endif + +#ifdef INCLUDE_EMMC_DRIVER_WRITE_CODE +/* + * Write to eMMC memory + * Returns written_size + */ +uint32_t emmc_write(uintptr_t mem_addr, uintptr_t data_addr, + size_t bytes_to_write) +{ + struct sd_handle *sd_handle = sdio_gethandle(); + + if (sd_handle->device == 0) { + EMMC_TRACE("eMMC init is not done"); + return 0; + } + + return sdio_write(sd_handle, mem_addr, data_addr, bytes_to_write); +} +#endif + +/* + * Send SDIO Cmd + * Return 0 for pass condition + */ +uint32_t send_sdio_cmd(uint32_t cmdIndex, uint32_t argument, + uint32_t options, struct sd_resp *resp) +{ + struct sd_handle *sd_handle = sdio_gethandle(); + + if (sd_handle->device == 0) { + EMMC_TRACE("eMMC init is not done"); + return 1; + } + + return send_cmd(sd_handle, cmdIndex, argument, options, resp); +} + + +/* + * This function return SDIO handle + */ +struct sd_handle *sdio_gethandle(void) +{ + return &emmc_global_vars_ptr->sdHandle; +} + +/* + * Initialize SDIO controller + */ +struct sd_handle *sdio_init(void) +{ + uint32_t SDIO_base; + struct sd_handle *p_sdhandle = &emmc_global_vars_ptr->sdHandle; + + SDIO_base = EMMC_CTRL_REGS_BASE_ADDR; + + if (SDIO_base == SDIO0_EMMCSDXC_SYSADDR) { + EMMC_TRACE(" ---> for SDIO 0 Controller\n\n"); + } + + memset(p_sdhandle, 0, sizeof(struct sd_handle)); + + p_sdhandle->device = &emmc_global_vars_ptr->sdDevice; + p_sdhandle->card = &emmc_global_vars_ptr->sdCard; + + memset(p_sdhandle->device, 0, sizeof(struct sd_dev)); + memset(p_sdhandle->card, 0, sizeof(struct sd_card_info)); + + if (chal_sd_start((CHAL_HANDLE *) p_sdhandle->device, + SD_PIO_MODE, SDIO_base, SDIO_base) != SD_OK) { + return NULL; + } + + set_config(p_sdhandle, SD_NORMAL_SPEED, MAX_CMD_RETRY, SD_DMA_OFF, + SD_DMA_BOUNDARY_4K, EMMC_BLOCK_SIZE, EMMC_WFE_RETRY); + + return &emmc_global_vars_ptr->sdHandle; +} + +uint32_t sdio_idle(struct sd_handle *p_sdhandle) +{ + reset_card(p_sdhandle); + + SD_US_DELAY(1000); + + if (init_card(p_sdhandle, SD_CARD_DETECT_MMC) != SD_OK) { + reset_card(p_sdhandle); + reset_host_ctrl(p_sdhandle); + return EMMC_BOOT_NO_CARD; + } + + return EMMC_BOOT_OK; +} + +/* + * This function read eMMC + */ +uint32_t sdio_read(struct sd_handle *p_sdhandle, + uintptr_t mem_addr, + uintptr_t storage_addr, + size_t storage_size, size_t bytes_to_read) +{ + uint32_t offset = 0, blockAddr, readLen = 0, rdCount; + uint32_t remSize, manual_copy_size; + uint8_t *outputBuf = (uint8_t *) storage_addr; + const size_t blockSize = p_sdhandle->device->cfg.blockSize; + + VERBOSE("EMMC READ: dst=0x%lx, src=0x%lx, size=0x%lx\n", + storage_addr, mem_addr, bytes_to_read); + + if (storage_size < bytes_to_read) { + /* Don't have sufficient storage to complete the operation */ + return 0; + } + + /* Range check non high capacity memory */ + if ((p_sdhandle->device->ctrl.ocr & SD_CARD_HIGH_CAPACITY) == 0) { + if (mem_addr > 0x80000000) { + return 0; + } + } + + /* High capacity card use block address mode */ + if (p_sdhandle->device->ctrl.ocr & SD_CARD_HIGH_CAPACITY) { + blockAddr = (uint32_t) (mem_addr / blockSize); + offset = (uint32_t) (mem_addr - (blockAddr * blockSize)); + } else { + blockAddr = (uint32_t) (mem_addr / blockSize) * blockSize; + offset = (uint32_t) (mem_addr - blockAddr); + } + + remSize = bytes_to_read; + + rdCount = 0; + + /* Process first unaligned block of MAX_READ_LENGTH */ + if (offset > 0) { + if (!read_block(p_sdhandle, emmc_global_buf_ptr->u.tempbuf, + blockAddr, SD_MAX_READ_LENGTH)) { + + if (remSize < (blockSize - offset)) { + rdCount += remSize; + manual_copy_size = remSize; + remSize = 0; /* read is done */ + } else { + remSize -= (blockSize - offset); + rdCount += (blockSize - offset); + manual_copy_size = blockSize - offset; + } + + /* Check for overflow */ + if (manual_copy_size > storage_size || + (((uintptr_t)outputBuf + manual_copy_size) > + (storage_addr + storage_size))) { + ERROR("EMMC READ: Overflow 1\n"); + return 0; + } + + memcpy(outputBuf, + (void *)((uintptr_t) + (emmc_global_buf_ptr->u.tempbuf + offset)), + manual_copy_size); + + /* Update Physical address */ + outputBuf += manual_copy_size; + + if (p_sdhandle->device->ctrl.ocr & SD_CARD_HIGH_CAPACITY) { + blockAddr++; + } else { + blockAddr += blockSize; + } + } else { + return 0; + } + } + + while (remSize >= blockSize) { + + if (remSize >= SD_MAX_BLK_TRANSFER_LENGTH) { + readLen = SD_MAX_BLK_TRANSFER_LENGTH; + } else { + readLen = (remSize / blockSize) * blockSize; + } + + /* Check for overflow */ + if ((rdCount + readLen) > storage_size || + (((uintptr_t) outputBuf + readLen) > + (storage_addr + storage_size))) { + ERROR("EMMC READ: Overflow\n"); + return 0; + } + + if (!read_block(p_sdhandle, outputBuf, blockAddr, readLen)) { + if (p_sdhandle->device->ctrl.ocr & SD_CARD_HIGH_CAPACITY) { + blockAddr += (readLen / blockSize); + } else { + blockAddr += readLen; + } + + remSize -= readLen; + rdCount += readLen; + + /* Update Physical address */ + outputBuf += readLen; + } else { + return 0; + } + } + + /* process the last unaligned block reading */ + if (remSize > 0) { + if (!read_block(p_sdhandle, emmc_global_buf_ptr->u.tempbuf, + blockAddr, SD_MAX_READ_LENGTH)) { + + rdCount += remSize; + /* Check for overflow */ + if (rdCount > storage_size || + (((uintptr_t) outputBuf + remSize) > + (storage_addr + storage_size))) { + ERROR("EMMC READ: Overflow\n"); + return 0; + } + + memcpy(outputBuf, + emmc_global_buf_ptr->u.tempbuf, remSize); + + /* Update Physical address */ + outputBuf += remSize; + } else { + rdCount = 0; + } + } + + return rdCount; +} + +#ifdef INCLUDE_EMMC_DRIVER_WRITE_CODE +static uint32_t sdio_write(struct sd_handle *p_sdhandle, uintptr_t mem_addr, + uintptr_t data_addr, size_t bytes_to_write) +{ + + uint32_t offset, blockAddr, writeLen, wtCount = 0; + uint32_t remSize, manual_copy_size = 0; + + uint8_t *inputBuf = (uint8_t *)data_addr; + + /* range check non high capacity memory */ + if ((p_sdhandle->device->ctrl.ocr & SD_CARD_HIGH_CAPACITY) == 0) { + if (mem_addr > 0x80000000) { + return 0; + } + } + + /* the high capacity card use block address mode */ + if (p_sdhandle->device->ctrl.ocr & SD_CARD_HIGH_CAPACITY) { + blockAddr = + (uint32_t)(mem_addr / p_sdhandle->device->cfg.blockSize); + offset = + (uint32_t)(mem_addr - + blockAddr * p_sdhandle->device->cfg.blockSize); + } else { + blockAddr = + ((uint32_t)mem_addr / p_sdhandle->device->cfg.blockSize) * + p_sdhandle->device->cfg.blockSize; + offset = (uint32_t) mem_addr - blockAddr; + } + + remSize = bytes_to_write; + + wtCount = 0; + + /* process first unaligned block */ + if (offset > 0) { + if (!read_block(p_sdhandle, emmc_global_buf_ptr->u.tempbuf, + blockAddr, p_sdhandle->device->cfg.blockSize)) { + + if (remSize < + (p_sdhandle->device->cfg.blockSize - offset)) { + manual_copy_size = remSize; + } else { + manual_copy_size = + p_sdhandle->device->cfg.blockSize - offset; + } + + memcpy((void *)((uintptr_t) + (emmc_global_buf_ptr->u.tempbuf + offset)), + inputBuf, + manual_copy_size); + + /* Update Physical address */ + + if (!write_block(p_sdhandle, + emmc_global_buf_ptr->u.tempbuf, + blockAddr, + p_sdhandle->device->cfg.blockSize)) { + + if (remSize < + (p_sdhandle->device->cfg.blockSize - + offset)) { + wtCount += remSize; + manual_copy_size = remSize; + remSize = 0; /* read is done */ + } else { + remSize -= + (p_sdhandle->device->cfg.blockSize - + offset); + wtCount += + (p_sdhandle->device->cfg.blockSize - + offset); + manual_copy_size = + p_sdhandle->device->cfg.blockSize - + offset; + } + + inputBuf += manual_copy_size; + + if (p_sdhandle->device->ctrl.ocr & + SD_CARD_HIGH_CAPACITY) { + blockAddr++; + } else { + blockAddr += + p_sdhandle->device->cfg.blockSize; + } + } else + return 0; + } else { + return 0; + } + } + + /* process block writing */ + while (remSize >= p_sdhandle->device->cfg.blockSize) { + if (remSize >= SD_MAX_READ_LENGTH) { + writeLen = SD_MAX_READ_LENGTH; + } else { + writeLen = + (remSize / p_sdhandle->device->cfg.blockSize) * + p_sdhandle->device->cfg.blockSize; + } + + if (!write_block(p_sdhandle, inputBuf, blockAddr, writeLen)) { + if (p_sdhandle->device->ctrl.ocr & SD_CARD_HIGH_CAPACITY) + blockAddr += + (writeLen / + p_sdhandle->device->cfg.blockSize); + else + blockAddr += writeLen; + + remSize -= writeLen; + wtCount += writeLen; + inputBuf += writeLen; + } else { + return 0; + } + } + + /* process the last unaligned block reading */ + if (remSize > 0) { + if (!read_block(p_sdhandle, + emmc_global_buf_ptr->u.tempbuf, + blockAddr, p_sdhandle->device->cfg.blockSize)) { + + memcpy(emmc_global_buf_ptr->u.tempbuf, + inputBuf, remSize); + + /* Update Physical address */ + + if (!write_block(p_sdhandle, + emmc_global_buf_ptr->u.tempbuf, + blockAddr, + p_sdhandle->device->cfg.blockSize)) { + wtCount += remSize; + inputBuf += remSize; + } else { + return 0; + } + } else { + wtCount = 0; + } + } + + return wtCount; +} +#endif + +/* + * Function to put the card in Ready state by sending CMD0 and CMD1 + */ +static int32_t bcm_emmc_card_ready_state(struct sd_handle *p_sdhandle) +{ + int32_t result = 0; + uint32_t argument = MMC_CMD_IDLE_RESET_ARG; /* Exit from Boot mode */ + + if (p_sdhandle) { + send_sdio_cmd(SD_CMD_GO_IDLE_STATE, argument, 0, NULL); + + result = reset_card(p_sdhandle); + if (result != SD_OK) { + EMMC_TRACE("eMMC Reset error\n"); + return SD_RESET_ERROR; + } + SD_US_DELAY(2000); + result = mmc_cmd1(p_sdhandle); + } + + return result; +} diff --git a/drivers/brcm/i2c/i2c.c b/drivers/brcm/i2c/i2c.c new file mode 100644 index 0000000..b45c0e7 --- /dev/null +++ b/drivers/brcm/i2c/i2c.c @@ -0,0 +1,886 @@ +/* + * Copyright (c) 2016 - 2021, Broadcom + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include +#include +#include +#include +#include + +#include + +/* Max instances */ +#define MAX_I2C 2U + +/* Transaction error codes defined in Master command register (0x30) */ +#define MSTR_STS_XACT_SUCCESS 0U +#define MSTR_STS_LOST_ARB 1U +#define MSTR_STS_NACK_FIRST_BYTE 2U + /* NACK on a byte other than the first byte */ +#define MSTR_STS_NACK_NON_FIRST_BYTE 3U + +#define MSTR_STS_TTIMEOUT_EXCEEDED 4U +#define MSTR_STS_TX_TLOW_MEXT_EXCEEDED 5U +#define MSTR_STS_RX_TLOW_MEXT_EXCEEDED 6U + +/* SMBUS protocol values defined in register 0x30 */ +#define SMBUS_PROT_QUICK_CMD 0U +#define SMBUS_PROT_SEND_BYTE 1U +#define SMBUS_PROT_RECV_BYTE 2U +#define SMBUS_PROT_WR_BYTE 3U +#define SMBUS_PROT_RD_BYTE 4U +#define SMBUS_PROT_WR_WORD 5U +#define SMBUS_PROT_RD_WORD 6U +#define SMBUS_PROT_BLK_WR 7U +#define SMBUS_PROT_BLK_RD 8U +#define SMBUS_PROT_PROC_CALL 9U +#define SMBUS_PROT_BLK_WR_BLK_RD_PROC_CALL 10U + +/* Number can be changed later */ +#define BUS_BUSY_COUNT 100000U + +#define IPROC_I2C_INVALID_ADDR 0xFFU + +#define I2C_SMBUS_BLOCK_MAX 32U + +/* + * Enum to specify clock speed. The user will provide it during initialization. + * If needed, it can be changed dynamically + */ +typedef enum iproc_smb_clk_freq { + IPROC_SMB_SPEED_100KHz = 0, + IPROC_SMB_SPEED_400KHz = 1, + IPROC_SMB_SPEED_INVALID = 255 +} smb_clk_freq_t; + +/* Structure used to pass information to read/write functions. */ +struct iproc_xact_info { + /* Bus Identifier */ + uint32_t bus_id; + /* Device Address */ + uint8_t devaddr; + /* Passed by caller to send SMBus command cod e*/ + uint8_t command; + /* actual data passed by the caller */ + uint8_t *data; + /* Size of data buffer passed */ + uint32_t size; + /* Sent by caller specifying PEC, 10-bit addresses */ + uint16_t flags; + /* SMBus protocol to use to perform transaction */ + uint8_t smb_proto; + /* true if command field below is valid. Otherwise, false */ + uint32_t cmd_valid; +}; + +static const uintptr_t smbus_base_reg_addr[MAX_I2C] = { + SMBUS0_REGS_BASE, + SMBUS1_REGS_BASE +}; + +/* Function to read a value from specified register. */ +static uint32_t iproc_i2c_reg_read(uint32_t bus_id, unsigned long reg_addr) +{ + uint32_t val; + uintptr_t smbus; + + smbus = smbus_base_reg_addr[bus_id]; + + val = mmio_read_32(smbus + reg_addr); + VERBOSE("i2c %u: reg %p read 0x%x\n", bus_id, + (void *)(smbus + reg_addr), val); + return val; +} + +/* Function to write a value ('val') in to a specified register. */ +static void iproc_i2c_reg_write(uint32_t bus_id, + unsigned long reg_addr, + uint32_t val) +{ + uintptr_t smbus; + + smbus = smbus_base_reg_addr[bus_id]; + + mmio_write_32((smbus + reg_addr), val); + VERBOSE("i2c %u: reg %p wrote 0x%x\n", bus_id, + (void *)(smbus + reg_addr), val); +} + +/* Function to clear and set bits in a specified register. */ +static void iproc_i2c_reg_clearset(uint32_t bus_id, + unsigned long reg_addr, + uint32_t clear, + uint32_t set) +{ + uintptr_t smbus; + + smbus = smbus_base_reg_addr[bus_id]; + + mmio_clrsetbits_32((smbus + reg_addr), clear, set); + VERBOSE("i2c %u: reg %p clear 0x%x, set 0x%x\n", bus_id, + (void *)(smbus + reg_addr), clear, set); +} + +/* Function to dump all SMBUS register */ +#ifdef BCM_I2C_DEBUG +static int iproc_dump_i2c_regs(uint32_t bus_id) +{ + uint32_t regval; + + if (bus_id > MAX_I2C) { + return -1; + } + + INFO("----------------------------------------------\n"); + INFO("%s: Dumping SMBus %u registers...\n", __func__, bus_id); + + regval = iproc_i2c_reg_read(bus_id, SMB_CFG_REG); + INFO("SMB_CFG_REG=0x%x\n", regval); + + regval = iproc_i2c_reg_read(bus_id, SMB_TIMGCFG_REG); + INFO("SMB_TIMGCFG_REG=0x%x\n", regval); + + regval = iproc_i2c_reg_read(bus_id, SMB_ADDR_REG); + INFO("SMB_ADDR_REG=0x%x\n", regval); + + regval = iproc_i2c_reg_read(bus_id, SMB_MSTRFIFOCTL_REG); + INFO("SMB_MSTRFIFOCTL_REG=0x%x\n", regval); + + regval = iproc_i2c_reg_read(bus_id, SMB_SLVFIFOCTL_REG); + INFO("SMB_SLVFIFOCTL_REG=0x%x\n", regval); + + regval = iproc_i2c_reg_read(bus_id, SMB_BITBANGCTL_REG); + INFO("SMB_BITBANGCTL_REG=0x%x\n", regval); + + regval = iproc_i2c_reg_read(bus_id, SMB_MSTRCMD_REG); + INFO("SMB_MSTRCMD_REG=0x%x\n", regval); + + regval = iproc_i2c_reg_read(bus_id, SMB_SLVCMD_REG); + INFO("SMB_SLVCMD_REG=0x%x\n", regval); + + regval = iproc_i2c_reg_read(bus_id, SMB_EVTEN_REG); + INFO("SMB_EVTEN_REG=0x%x\n", regval); + + regval = iproc_i2c_reg_read(bus_id, SMB_EVTSTS_REG); + INFO("SMB_EVTSTS_REG=0x%x\n", regval); + + regval = iproc_i2c_reg_read(bus_id, SMB_MSTRDATAWR_REG); + INFO("SMB_MSTRDATAWR_REG=0x%x\n", regval); + + regval = iproc_i2c_reg_read(bus_id, SMB_MSTRDATARD_REG); + INFO("SMB_MSTRDATARD_REG=0x%x\n", regval); + + regval = iproc_i2c_reg_read(bus_id, SMB_SLVDATAWR_REG); + INFO("SMB_SLVDATAWR_REG=0x%x\n", regval); + + regval = iproc_i2c_reg_read(bus_id, SMB_SLVDATARD_REG); + INFO("SMB_SLVDATARD_REG=0x%x\n", regval); + + INFO("----------------------------------------------\n"); + return 0; +} +#endif + +/* + * Function to ensure that the previous transaction was completed before + * initiating a new transaction. It can also be used in polling mode to + * check status of completion of a command + */ +static int iproc_i2c_startbusy_wait(uint32_t bus_id) +{ + uint32_t regval; + uint32_t retry = 0U; + + /* + * Check if an operation is in progress. During probe it won't be. + * Want to make sure that the transaction in progress is completed. + */ + do { + udelay(1U); + regval = iproc_i2c_reg_read(bus_id, SMB_MSTRCMD_REG); + regval &= SMB_MSTRSTARTBUSYCMD_MASK; + if (retry++ > BUS_BUSY_COUNT) { + ERROR("%s: START_BUSY bit didn't clear, exiting\n", + __func__); + return -1; + } + + } while (regval != 0U); + + return 0; +} + +/* + * This function copies data to SMBus's Tx FIFO. Valid for write transactions + * info: Data to copy in to Tx FIFO. For read commands, the size should be + * set to zero by the caller + */ +static void iproc_i2c_write_trans_data(struct iproc_xact_info *info) +{ + uint32_t regval; + uint8_t devaddr; + uint32_t i; + uint32_t num_data_bytes = 0U; + +#ifdef BCM_I2C_DEBUG + INFO("%s:dev_addr=0x%x,cmd_valid=%d, cmd=0x%x, size=%u proto=%d\n", + __func__, info->devaddr, info->cmd_valid, info->command, + info->size, info->smb_proto); +#endif + /* Shift devaddr by 1 bit since SMBus uses the low bit[0] for R/W_n */ + devaddr = (info->devaddr << 1); + + /* + * Depending on the SMBus protocol, we need to write additional + * transaction data in to Tx FIFO. Refer to section 5.5 of SMBus spec + * for sequence for a transaction + */ + switch (info->smb_proto) { + case SMBUS_PROT_RECV_BYTE: + /* No additional data to be written */ + iproc_i2c_reg_write(info->bus_id, SMB_MSTRDATAWR_REG, + devaddr | 0x1U | SMB_MSTRWRSTS_MASK); + break; + case SMBUS_PROT_SEND_BYTE: + num_data_bytes = info->size; + iproc_i2c_reg_write(info->bus_id, SMB_MSTRDATAWR_REG, + devaddr); + break; + case SMBUS_PROT_RD_BYTE: + case SMBUS_PROT_RD_WORD: + case SMBUS_PROT_BLK_RD: + /* Write slave address with R/W~ set (bit #0) */ + iproc_i2c_reg_write(info->bus_id, SMB_MSTRDATAWR_REG, + devaddr | 0x1U); + break; + case SMBUS_PROT_BLK_WR_BLK_RD_PROC_CALL: + iproc_i2c_reg_write(info->bus_id, SMB_MSTRDATAWR_REG, + devaddr | 0x1U | SMB_MSTRWRSTS_MASK); + break; + case SMBUS_PROT_WR_BYTE: + case SMBUS_PROT_WR_WORD: + iproc_i2c_reg_write(info->bus_id, SMB_MSTRDATAWR_REG, + devaddr); + /* + * No additional bytes to be written. Data portion is written + * in the 'for' loop below + */ + num_data_bytes = info->size; + break; + case SMBUS_PROT_BLK_WR: + iproc_i2c_reg_write(info->bus_id, SMB_MSTRDATAWR_REG, + devaddr); + /* 3rd byte is byte count */ + iproc_i2c_reg_write(info->bus_id, SMB_MSTRDATAWR_REG, + info->size); + num_data_bytes = info->size; + break; + default: + return; + } + + /* If the protocol needs command code, copy it */ + if (info->cmd_valid) { + iproc_i2c_reg_write(info->bus_id, SMB_MSTRDATAWR_REG, + info->command); + } + + /* + * Copy actual data from caller. In general, for reads, + * no data is copied. + */ + for (i = 0U; num_data_bytes; --num_data_bytes, i++) { + /* For the last byte, set MASTER_WR_STATUS bit */ + regval = (num_data_bytes == 1U) ? + info->data[i] | SMB_MSTRWRSTS_MASK : info->data[i]; + iproc_i2c_reg_write(info->bus_id, SMB_MSTRDATAWR_REG, + regval); + } +} + +/* + * This function writes to the master command register and + * then polls for completion + */ +static int iproc_i2c_write_master_command(uint32_t mastercmd, + struct iproc_xact_info *info) +{ + uint32_t retry = 0U; + uint32_t regval; + + iproc_i2c_reg_write(info->bus_id, SMB_MSTRCMD_REG, mastercmd); + + /* Check for Master Busy status */ + regval = iproc_i2c_reg_read(info->bus_id, SMB_MSTRCMD_REG); + while ((regval & SMB_MSTRSTARTBUSYCMD_MASK) != 0U) { + udelay(1U); + if (retry++ > BUS_BUSY_COUNT) { + ERROR("%s: START_BUSY bit didn't clear, exiting\n", + __func__); + return -1; + } + regval = iproc_i2c_reg_read(info->bus_id, SMB_MSTRCMD_REG); + } + + /* If start_busy bit cleared, check if there are any errors */ + if (!(regval & SMB_MSTRSTARTBUSYCMD_MASK)) { + /* start_busy bit cleared, check master_status field now */ + regval &= SMB_MSTRSTS_MASK; + regval >>= SMB_MSTRSTS_SHIFT; + if (regval != MSTR_STS_XACT_SUCCESS) { + /* Error We can flush Tx FIFO here */ + ERROR("%s: ERROR: %u exiting\n", __func__, regval); + return -1; + } + } + return 0; + +} +/* Function to initiate data send and verify completion status */ +static int iproc_i2c_data_send(struct iproc_xact_info *info) +{ + int rc; + uint32_t mastercmd; + + /* Make sure the previous transaction completed */ + rc = iproc_i2c_startbusy_wait(info->bus_id); + + if (rc < 0) { + WARN("%s: Send: bus is busy, exiting\n", __func__); + return rc; + } + /* Write transaction bytes to Tx FIFO */ + iproc_i2c_write_trans_data(info); + + /* + * Program master command register (0x30) with protocol type and set + * start_busy_command bit to initiate the write transaction + */ + mastercmd = (info->smb_proto << SMB_MSTRSMBUSPROTO_SHIFT) | + SMB_MSTRSTARTBUSYCMD_MASK; + + if (iproc_i2c_write_master_command(mastercmd, info)) { + return -1; + } + + return 0; +} + +/* + * Function to initiate data receive, verify completion status, + * and read from SMBUS Read FIFO + */ +static int iproc_i2c_data_recv(struct iproc_xact_info *info, + uint32_t *num_bytes_read) +{ + int rc; + uint32_t mastercmd; + uint32_t regval; + + /* Make sure the previous transaction completed */ + rc = iproc_i2c_startbusy_wait(info->bus_id); + + if (rc < 0) { + WARN("%s: Receive: Bus is busy, exiting\n", __func__); + return rc; + } + + /* Program all transaction bytes into master Tx FIFO */ + iproc_i2c_write_trans_data(info); + + /* + * Program master command register (0x30) with protocol type and set + * start_busy_command bit to initiate the write transaction + */ + mastercmd = (info->smb_proto << SMB_MSTRSMBUSPROTO_SHIFT) | + SMB_MSTRSTARTBUSYCMD_MASK | info->size; + + if (iproc_i2c_write_master_command(mastercmd, info)) { + return -1; + } + + /* Read received byte(s), after TX out address etc */ + regval = iproc_i2c_reg_read(info->bus_id, SMB_MSTRDATARD_REG); + + /* For block read, protocol (hw) returns byte count,as the first byte */ + if (info->smb_proto == SMBUS_PROT_BLK_RD) { + uint32_t i; + + *num_bytes_read = regval & SMB_MSTRRDDATA_MASK; + /* + * Limit to reading a max of 32 bytes only; just a safeguard. + * If # bytes read is a number > 32, check transaction set up, + * and contact hw engg. + * Assumption: PEC is disabled + */ + for (i = 0U; (i < *num_bytes_read) && + (i < I2C_SMBUS_BLOCK_MAX); i++) { + /* Read Rx FIFO for data bytes */ + regval = iproc_i2c_reg_read(info->bus_id, + SMB_MSTRDATARD_REG); + info->data[i] = regval & SMB_MSTRRDDATA_MASK; + } + } else { + /* 1 Byte data */ + *info->data = regval & SMB_MSTRRDDATA_MASK; + *num_bytes_read = 1U; + } + + return 0; +} + +/* + * This function set clock frequency for SMBus block. As per hardware + * engineering, the clock frequency can be changed dynamically. + */ +static int iproc_i2c_set_clk_freq(uint32_t bus_id, smb_clk_freq_t freq) +{ + uint32_t val; + + switch (freq) { + case IPROC_SMB_SPEED_100KHz: + val = 0U; + break; + case IPROC_SMB_SPEED_400KHz: + val = 1U; + break; + default: + return -1; + } + + iproc_i2c_reg_clearset(bus_id, SMB_TIMGCFG_REG, + SMB_TIMGCFG_MODE400_MASK, + val << SMB_TIMGCFG_MODE400_SHIFT); + + return 0; +} + +/* Helper function to fill the iproc_xact_info structure */ +static void iproc_i2c_fill_info(struct iproc_xact_info *info, uint32_t bus_id, + uint8_t devaddr, uint8_t cmd, uint8_t *value, + uint8_t smb_proto, uint32_t cmd_valid) +{ + info->bus_id = bus_id; + info->devaddr = devaddr; + info->command = (uint8_t)cmd; + info->smb_proto = smb_proto; + info->data = value; + info->size = 1U; + info->flags = 0U; + info->cmd_valid = cmd_valid; +} + +/* This function initializes the SMBUS */ +static void iproc_i2c_init(uint32_t bus_id, int speed) +{ + uint32_t regval; + +#ifdef BCM_I2C_DEBUG + INFO("%s: Enter Init\n", __func__); +#endif + + /* Put controller in reset */ + regval = iproc_i2c_reg_read(bus_id, SMB_CFG_REG); + regval |= BIT(SMB_CFG_RST_SHIFT); + regval &= ~(BIT(SMB_CFG_SMBEN_SHIFT)); + iproc_i2c_reg_write(bus_id, SMB_CFG_REG, regval); + + /* Wait 100 usec per spec */ + udelay(100U); + + /* Bring controller out of reset */ + regval &= ~(BIT(SMB_CFG_RST_SHIFT)); + iproc_i2c_reg_write(bus_id, SMB_CFG_REG, regval); + + /* + * Flush Tx, Rx FIFOs. Note we are setting the Rx FIFO threshold to 0. + * May be OK since we are setting RX_EVENT and RX_FIFO_FULL interrupts + */ + regval = SMB_MSTRRXFIFOFLSH_MASK | SMB_MSTRTXFIFOFLSH_MASK; + iproc_i2c_reg_write(bus_id, SMB_MSTRFIFOCTL_REG, regval); + + /* + * Enable SMbus block. Note, we are setting MASTER_RETRY_COUNT to zero + * since there will be only one master + */ + + regval = iproc_i2c_reg_read(bus_id, SMB_CFG_REG); + regval |= SMB_CFG_SMBEN_MASK; + iproc_i2c_reg_write(bus_id, SMB_CFG_REG, regval); + /* Wait a minimum of 50 Usec, as per SMB hw doc. But we wait longer */ + mdelay(10U); + + /* If error then set default speed */ + if (i2c_set_bus_speed(bus_id, speed)) { + i2c_set_bus_speed(bus_id, I2C_SPEED_DEFAULT); + } + + /* Disable intrs */ + regval = 0x0U; + iproc_i2c_reg_write(bus_id, SMB_EVTEN_REG, regval); + + /* Clear intrs (W1TC) */ + regval = iproc_i2c_reg_read(bus_id, SMB_EVTSTS_REG); + iproc_i2c_reg_write(bus_id, SMB_EVTSTS_REG, regval); + +#ifdef BCM_I2C_DEBUG + iproc_dump_i2c_regs(bus_id); + + INFO("%s: Exit Init Successfully\n", __func__); +#endif +} + +/* + * Function Name: i2c_init + * + * Description: + * This function initializes the SMBUS. + * + * Parameters: + * bus_id - I2C bus ID + * speed - I2C bus speed in Hz + * + * Return: + * 0 on success, or -1 on failure. + */ +int i2c_init(uint32_t bus_id, int speed) +{ + if (bus_id > MAX_I2C) { + WARN("%s: Invalid Bus %u\n", __func__, bus_id); + return -1; + } + + iproc_i2c_init(bus_id, speed); + return 0U; +} + +/* + * Function Name: i2c_probe + * + * Description: + * This function probes the I2C bus for the existence of the specified + * device. + * + * Parameters: + * bus_id - I2C bus ID + * devaddr - Device Address + * + * Return: + * 0 on success, or -1 on failure. + */ +int i2c_probe(uint32_t bus_id, uint8_t devaddr) +{ + uint32_t regval; + int rc; + + /* + * i2c_init() Initializes internal regs, disable intrs (and then clear intrs), + * set fifo thresholds, etc. + * Shift devaddr by 1 bit since SMBus uses the low bit[0] for R/W_n + */ + regval = (devaddr << 1U); + iproc_i2c_reg_write(bus_id, SMB_MSTRDATAWR_REG, regval); + + regval = ((SMBUS_PROT_QUICK_CMD << SMB_MSTRSMBUSPROTO_SHIFT) | + SMB_MSTRSTARTBUSYCMD_MASK); + iproc_i2c_reg_write(bus_id, SMB_MSTRCMD_REG, regval); + + rc = iproc_i2c_startbusy_wait(bus_id); + + if (rc < 0) { + WARN("%s: Probe: bus is busy, exiting\n", __func__); + return rc; + } + + regval = iproc_i2c_reg_read(bus_id, SMB_MSTRCMD_REG); + if (((regval & SMB_MSTRSTS_MASK) >> SMB_MSTRSTS_SHIFT) == 0) + VERBOSE("i2c device address: 0x%x\n", devaddr); + else + return -1; + +#ifdef BCM_I2C_DEBUG + iproc_dump_i2c_regs(bus_id); +#endif + return 0; +} + +/* + * Function Name: i2c_recv_byte + * + * Description: + * This function reads I2C data from a device without specifying + * a command register. + * + * Parameters: + * bus_id - I2C bus ID + * devaddr - Device Address + * value - Data Read + * + * Return: + * 0 on success, or -1 on failure. + */ +int i2c_recv_byte(uint32_t bus_id, uint8_t devaddr, uint8_t *value) +{ + int rc; + struct iproc_xact_info info; + uint32_t num_bytes_read = 0; + + iproc_i2c_fill_info(&info, bus_id, devaddr, 0U, value, + SMBUS_PROT_RECV_BYTE, 0U); + + /* Refer to i2c_smbus_read_byte for params passed. */ + rc = iproc_i2c_data_recv(&info, &num_bytes_read); + + if (rc < 0) { + printf("%s: %s error accessing device 0x%x\n", + __func__, "Read", devaddr); + } + + return rc; +} + +/* + * Function Name: i2c_send_byte + * + * Description: + * This function send I2C data to a device without specifying + * a command register. + * + * Parameters: + * bus_id - I2C bus ID + * devaddr - Device Address + * value - Data Send + * + * Return: + * 0 on success, or -1 on failure. + */ +int i2c_send_byte(uint32_t bus_id, uint8_t devaddr, uint8_t value) +{ + int rc; + struct iproc_xact_info info; + + iproc_i2c_fill_info(&info, bus_id, devaddr, 0U, &value, + SMBUS_PROT_SEND_BYTE, 0U); + + /* Refer to i2c_smbus_write_byte params passed. */ + rc = iproc_i2c_data_send(&info); + + if (rc < 0) { + ERROR("%s: %s error accessing device 0x%x\n", + __func__, "Write", devaddr); + } + + return rc; +} + +/* Helper function to read a single byte */ +static int i2c_read_byte(uint32_t bus_id, + uint8_t devaddr, + uint8_t regoffset, + uint8_t *value) +{ + int rc; + struct iproc_xact_info info; + uint32_t num_bytes_read = 0U; + + iproc_i2c_fill_info(&info, bus_id, devaddr, regoffset, value, + SMBUS_PROT_RD_BYTE, 1U); + + /* Refer to i2c_smbus_read_byte for params passed. */ + rc = iproc_i2c_data_recv(&info, &num_bytes_read); + + if (rc < 0) { + ERROR("%s: %s error accessing device 0x%x\n", + __func__, "Read", devaddr); + } + return rc; +} + +/* + * Function Name: i2c_read + * + * Description: + * This function reads I2C data from a device with a designated + * command register + * + * Parameters: + * bus_id - I2C bus ID + * devaddr - Device Address + * addr - Register Offset + * alen - Address Length, 1 for byte, 2 for word (not supported) + * buffer - Data Buffer + * len - Data Length in bytes + * + * Return: + * 0 on success, or -1 on failure. + */ +int i2c_read(uint32_t bus_id, + uint8_t devaddr, + uint32_t addr, + int alen, + uint8_t *buffer, + int len) +{ + uint32_t i; + + if (alen > 1) { + WARN("I2C read: addr len %d not supported\n", alen); + return -1; + } + + if (addr + len > 256) { + WARN("I2C read: address out of range\n"); + return -1; + } + + for (i = 0U; i < len; i++) { + if (i2c_read_byte(bus_id, devaddr, addr + i, &buffer[i])) { + ERROR("I2C read: I/O error\n"); + iproc_i2c_init(bus_id, i2c_get_bus_speed(bus_id)); + return -1; + } + } + + return 0; +} + +/* Helper function to write a single byte */ +static int i2c_write_byte(uint32_t bus_id, + uint8_t devaddr, + uint8_t regoffset, + uint8_t value) +{ + int rc; + struct iproc_xact_info info; + + iproc_i2c_fill_info(&info, bus_id, devaddr, regoffset, &value, + SMBUS_PROT_WR_BYTE, 1U); + + /* Refer to i2c_smbus_write_byte params passed. */ + rc = iproc_i2c_data_send(&info); + + if (rc < 0) { + ERROR("%s: %s error accessing device 0x%x\n", + __func__, "Write", devaddr); + return -1; + } + + return 0; +} + +/* + * Function Name: i2c_write + * + * Description: + * This function write I2C data to a device with a designated + * command register + * + * Parameters: + * bus_id - I2C bus ID + * devaddr - Device Address + * addr - Register Offset + * alen - Address Length, 1 for byte, 2 for word (not supported) + * buffer - Data Buffer + * len - Data Length in bytes + * + * Return: + * 0 on success, or -1 on failure. + */ +int i2c_write(uint32_t bus_id, + uint8_t devaddr, + uint32_t addr, + int alen, + uint8_t *buffer, + int len) +{ + uint32_t i; + + if (alen > 1) { + WARN("I2C write: addr len %d not supported\n", alen); + return -1; + } + + if (addr + len > 256U) { + WARN("I2C write: address out of range\n"); + return -1; + } + + for (i = 0U; i < len; i++) { + if (i2c_write_byte(bus_id, devaddr, addr + i, buffer[i])) { + ERROR("I2C write: I/O error\n"); + iproc_i2c_init(bus_id, i2c_get_bus_speed(bus_id)); + return -1; + } + } + return 0; +} + +/* + * Function Name: i2c_set_bus_speed + * + * Description: + * This function configures the SMBUS speed + * + * Parameters: + * bus_id - I2C bus ID + * speed - I2C bus speed in Hz + * + * Return: + * 0 on success, or -1 on failure. + */ +int i2c_set_bus_speed(uint32_t bus_id, uint32_t speed) +{ + switch (speed) { + case I2C_SPEED_100KHz: + iproc_i2c_set_clk_freq(bus_id, IPROC_SMB_SPEED_100KHz); + break; + + case I2C_SPEED_400KHz: + iproc_i2c_set_clk_freq(bus_id, IPROC_SMB_SPEED_400KHz); + break; + + default: + return -1; + } + return 0; +} + +/* + * Function Name: i2c_get_bus_speed + * + * Description: + * This function returns the SMBUS speed. + * + * Parameters: + * bus_id - I2C bus ID + * + * Return: + * Bus speed in Hz, 0 on failure + */ +uint32_t i2c_get_bus_speed(uint32_t bus_id) +{ + uint32_t regval; + uint32_t retval = 0U; + + regval = iproc_i2c_reg_read(bus_id, SMB_TIMGCFG_REG); + regval &= SMB_TIMGCFG_MODE400_MASK; + regval >>= SMB_TIMGCFG_MODE400_SHIFT; + + switch (regval) { + case IPROC_SMB_SPEED_100KHz: + retval = I2C_SPEED_100KHz; + break; + + case IPROC_SMB_SPEED_400KHz: + retval = I2C_SPEED_400KHz; + break; + + default: + break; + } + return retval; +} + diff --git a/drivers/brcm/iproc_gpio.c b/drivers/brcm/iproc_gpio.c new file mode 100644 index 0000000..f61a3bc --- /dev/null +++ b/drivers/brcm/iproc_gpio.c @@ -0,0 +1,232 @@ +/* + * Copyright (c) 2019-2020, Broadcom + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include + +#include +#include +#include + +#include +#include + +#define IPROC_GPIO_DATA_IN_OFFSET 0x00 +#define IPROC_GPIO_DATA_OUT_OFFSET 0x04 +#define IPROC_GPIO_OUT_EN_OFFSET 0x08 +#define IPROC_GPIO_PAD_RES_OFFSET 0x34 +#define IPROC_GPIO_RES_EN_OFFSET 0x38 + +#define PINMUX_OFFSET(gpio) ((gpio) * 4) +#define PINCONF_OFFSET(gpio) ((gpio) * 4) +#define PINCONF_PULL_UP BIT(4) +#define PINCONF_PULL_DOWN BIT(5) + +/* + * iProc GPIO bank is always 0x200 per bank, + * with each bank supporting 32 GPIOs. + */ +#define GPIO_BANK_SIZE 0x200 +#define NGPIOS_PER_BANK 32 +#define GPIO_BANK(pin) ((pin) / NGPIOS_PER_BANK) + +#define IPROC_GPIO_REG(pin, reg) (GPIO_BANK(pin) * GPIO_BANK_SIZE + (reg)) +#define IPROC_GPIO_SHIFT(pin) ((pin) % NGPIOS_PER_BANK) + +#define MUX_GPIO_MODE 0x3 + +/* + * @base: base address of the gpio controller + * @pinconf_base: base address of the pinconf + * @pinmux_base: base address of the mux controller + * @nr_gpios: maxinum number of GPIOs + */ +struct iproc_gpio { + uintptr_t base; + uintptr_t pinconf_base; + uintptr_t pinmux_base; + int nr_gpios; +}; + +static struct iproc_gpio iproc_gpio; + +static void gpio_set_bit(uintptr_t base, unsigned int reg, int gpio, bool set) +{ + unsigned int offset = IPROC_GPIO_REG(gpio, reg); + unsigned int shift = IPROC_GPIO_SHIFT(gpio); + uint32_t val; + + val = mmio_read_32(base + offset); + if (set) + val |= BIT(shift); + else + val &= ~BIT(shift); + + mmio_write_32(base + offset, val); +} + +static bool gpio_get_bit(uintptr_t base, unsigned int reg, int gpio) +{ + unsigned int offset = IPROC_GPIO_REG(gpio, reg); + unsigned int shift = IPROC_GPIO_SHIFT(gpio); + + return !!(mmio_read_32(base + offset) & BIT(shift)); +} + +static void mux_to_gpio(struct iproc_gpio *g, int gpio) +{ + /* mux pad to GPIO if IOPAD configuration is mandatory */ + if (g->pinmux_base) + mmio_write_32(g->pinmux_base + PINMUX_OFFSET(gpio), + MUX_GPIO_MODE); +} + +static void set_direction(int gpio, int direction) +{ + struct iproc_gpio *g = &iproc_gpio; + bool dir = (direction == GPIO_DIR_OUT) ? true : false; + + assert(gpio < g->nr_gpios); + + mux_to_gpio(g, gpio); + gpio_set_bit(g->base, IPROC_GPIO_OUT_EN_OFFSET, gpio, dir); +} + +static int get_direction(int gpio) +{ + struct iproc_gpio *g = &iproc_gpio; + int dir; + + assert(gpio < g->nr_gpios); + + mux_to_gpio(g, gpio); + dir = gpio_get_bit(g->base, IPROC_GPIO_OUT_EN_OFFSET, gpio) ? + GPIO_DIR_OUT : GPIO_DIR_IN; + + return dir; +} + +static int get_value(int gpio) +{ + struct iproc_gpio *g = &iproc_gpio; + unsigned int offset; + + assert(gpio < g->nr_gpios); + + mux_to_gpio(g, gpio); + + /* + * If GPIO is configured as output, read from the GPIO_OUT register; + * otherwise, read from the GPIO_IN register + */ + offset = gpio_get_bit(g->base, IPROC_GPIO_OUT_EN_OFFSET, gpio) ? + IPROC_GPIO_DATA_OUT_OFFSET : IPROC_GPIO_DATA_IN_OFFSET; + + return gpio_get_bit(g->base, offset, gpio); +} + +static void set_value(int gpio, int val) +{ + struct iproc_gpio *g = &iproc_gpio; + + assert(gpio < g->nr_gpios); + + mux_to_gpio(g, gpio); + + /* make sure GPIO is configured to output, and then set the value */ + gpio_set_bit(g->base, IPROC_GPIO_OUT_EN_OFFSET, gpio, true); + gpio_set_bit(g->base, IPROC_GPIO_DATA_OUT_OFFSET, gpio, !!(val)); +} + +static int get_pull(int gpio) +{ + struct iproc_gpio *g = &iproc_gpio; + uint32_t val; + + assert(gpio < g->nr_gpios); + mux_to_gpio(g, gpio); + + /* when there's a valid pinconf_base, use it */ + if (g->pinconf_base) { + val = mmio_read_32(g->pinconf_base + PINCONF_OFFSET(gpio)); + + if (val & PINCONF_PULL_UP) + return GPIO_PULL_UP; + else if (val & PINCONF_PULL_DOWN) + return GPIO_PULL_DOWN; + else + return GPIO_PULL_NONE; + } + + /* no pinconf_base. fall back to GPIO internal pull control */ + if (!gpio_get_bit(g->base, IPROC_GPIO_RES_EN_OFFSET, gpio)) + return GPIO_PULL_NONE; + + return gpio_get_bit(g->base, IPROC_GPIO_PAD_RES_OFFSET, gpio) ? + GPIO_PULL_UP : GPIO_PULL_DOWN; +} + +static void set_pull(int gpio, int pull) +{ + struct iproc_gpio *g = &iproc_gpio; + uint32_t val; + + assert(gpio < g->nr_gpios); + mux_to_gpio(g, gpio); + + /* when there's a valid pinconf_base, use it */ + if (g->pinconf_base) { + val = mmio_read_32(g->pinconf_base + PINCONF_OFFSET(gpio)); + + if (pull == GPIO_PULL_NONE) { + val &= ~(PINCONF_PULL_UP | PINCONF_PULL_DOWN); + } else if (pull == GPIO_PULL_UP) { + val |= PINCONF_PULL_UP; + val &= ~PINCONF_PULL_DOWN; + } else if (pull == GPIO_PULL_DOWN) { + val |= PINCONF_PULL_DOWN; + val &= ~PINCONF_PULL_UP; + } else { + return; + } + mmio_write_32(g->pinconf_base + PINCONF_OFFSET(gpio), val); + } + + /* no pinconf_base. fall back to GPIO internal pull control */ + if (pull == GPIO_PULL_NONE) { + gpio_set_bit(g->base, IPROC_GPIO_RES_EN_OFFSET, gpio, false); + return; + } + + /* enable pad register and pull up or down */ + gpio_set_bit(g->base, IPROC_GPIO_RES_EN_OFFSET, gpio, true); + gpio_set_bit(g->base, IPROC_GPIO_PAD_RES_OFFSET, gpio, + !!(pull == GPIO_PULL_UP)); +} + +const gpio_ops_t iproc_gpio_ops = { + .get_direction = get_direction, + .set_direction = set_direction, + .get_value = get_value, + .set_value = set_value, + .get_pull = get_pull, + .set_pull = set_pull, +}; + +void iproc_gpio_init(uintptr_t base, int nr_gpios, uintptr_t pinmux_base, + uintptr_t pinconf_base) +{ + iproc_gpio.base = base; + iproc_gpio.nr_gpios = nr_gpios; + + /* pinmux/pinconf base is optional for some SoCs */ + if (pinmux_base) + iproc_gpio.pinmux_base = pinmux_base; + + if (pinconf_base) + iproc_gpio.pinconf_base = pinconf_base; + + gpio_init(&iproc_gpio_ops); +} diff --git a/drivers/brcm/mdio/mdio.c b/drivers/brcm/mdio/mdio.c new file mode 100644 index 0000000..1cf9d66 --- /dev/null +++ b/drivers/brcm/mdio/mdio.c @@ -0,0 +1,87 @@ +/* + * Copyright (c) 2016 - 2021, Broadcom + * + * SPDX-License-Identifier: BSD-3-Clause + */ +#include + +#include + +#include +#include +#include +#include + +static int mdio_op_status(uint32_t result) +{ + uint32_t timeout = 1000000U; /* loop for 1s */ + uint32_t val; + + do { + val = mmio_read_32(CMIC_MIIM_STAT); + if ((val & MDIO_STAT_DONE) == result) { + return 0; + } + + udelay(1U); + } while (timeout-- != 0U); + return -1; +} + +static int mdio_op(uint16_t busid, uint16_t phyid, uint32_t reg, + uint16_t val, uint8_t op) +{ + uint32_t param; + int ret; + + mmio_write_32(CMIC_MIIM_CTRL, 0U); + ret = mdio_op_status(0U); + if (ret != 0) { + goto err; + } + + param = 0U; + param |= 1U << MDIO_PARAM_INTERNAL_SEL; + param |= (busid & MDIO_PARAM_BUSID_MASK) << MDIO_PARAM_BUSID; + param |= (phyid & MDIO_PARAM_PHYID_MASK) << MDIO_PARAM_PHYID; + param |= (val & MDIO_PARAM_DATA_MASK) << MDIO_PARAM_DATA; + + mmio_write_32(CMIC_MIIM_PARAM, param); + + mmio_write_32(CMIC_MIIM_ADDRESS, reg); + + mmio_write_32(CMIC_MIIM_CTRL, op); + + ret = mdio_op_status(1U); + if (ret != 0) { + goto err; + } + + if (op == MDIO_CTRL_READ_OP) { + ret = mmio_read_32(CMIC_MIIM_READ_DATA) & MDIO_READ_DATA_MASK; + } +err: + return ret; +} + +int mdio_write(uint16_t busid, uint16_t phyid, uint32_t reg, uint16_t val) +{ + int ret; + + ret = mdio_op(busid, phyid, reg, val, MDIO_CTRL_WRITE_OP); + if (ret == -1) { + INFO("MDIO write fail\n"); + } + return ret; +} + +int mdio_read(uint16_t busid, uint16_t phyid, uint32_t reg) +{ + int ret; + + ret = mdio_op(busid, phyid, reg, 0U, MDIO_CTRL_READ_OP); + if (ret == -1) { + INFO("MDIO read fail\n"); + } + return ret; +} diff --git a/drivers/brcm/ocotp.c b/drivers/brcm/ocotp.c new file mode 100644 index 0000000..6ff8554 --- /dev/null +++ b/drivers/brcm/ocotp.c @@ -0,0 +1,204 @@ +/* + * Copyright (c) 2017 - 2020, Broadcom + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include + +#include +#include +#include + +#include +#include + +#define OTP_MAP 2 +#define OTP_NUM_WORDS 2048 +/* + * # of tries for OTP Status. The time to execute a command varies. The slowest + * commands are writes which also vary based on the # of bits turned on. Writing + * 0xffffffff takes ~3800 us. + */ +#define OTPC_RETRIES_US 5000 + +/* Sequence to enable OTP program */ +#define OTPC_PROG_EN_SEQ { 0xf, 0x4, 0x8, 0xd } + +/* OTPC Commands */ +#define OTPC_CMD_READ 0x0 +#define OTPC_CMD_OTP_PROG_ENABLE 0x2 +#define OTPC_CMD_OTP_PROG_DISABLE 0x3 +#define OTPC_CMD_PROGRAM 0x8 +#define OTPC_CMD_ECC 0x10 +#define OTPC_ECC_ADDR 0x1A +#define OTPC_ECC_VAL 0x00EC0000 + +/* OTPC Status Bits */ +#define OTPC_STAT_CMD_DONE BIT(1) +#define OTPC_STAT_PROG_OK BIT(2) + +/* OTPC register definition */ +#define OTPC_MODE_REG_OFFSET 0x0 +#define OTPC_MODE_REG_OTPC_MODE 0 +#define OTPC_COMMAND_OFFSET 0x4 +#define OTPC_COMMAND_COMMAND_WIDTH 6 +#define OTPC_CMD_START_OFFSET 0x8 +#define OTPC_CMD_START_START 0 +#define OTPC_CPU_STATUS_OFFSET 0xc +#define OTPC_CPUADDR_REG_OFFSET 0x28 +#define OTPC_CPUADDR_REG_OTPC_CPU_ADDRESS_WIDTH 16 +#define OTPC_CPU_WRITE_REG_OFFSET 0x2c + +#define OTPC_CMD_MASK (BIT(OTPC_COMMAND_COMMAND_WIDTH) - 1) +#define OTPC_ADDR_MASK (BIT(OTPC_CPUADDR_REG_OTPC_CPU_ADDRESS_WIDTH) - 1) + +#define OTPC_MODE_REG OCOTP_REGS_BASE + +struct chip_otp_cfg { + uint32_t base; + uint32_t num_words; +}; + +struct chip_otp_cfg ocotp_cfg = { + .base = OTPC_MODE_REG, + .num_words = 2048, +}; + +struct otpc_priv { + uint32_t base; + struct otpc_map *map; + int size; + int state; +}; + +struct otpc_priv otpc_info; + +static inline void set_command(uint32_t base, uint32_t command) +{ + mmio_write_32(base + OTPC_COMMAND_OFFSET, command & OTPC_CMD_MASK); +} + +static inline void set_cpu_address(uint32_t base, uint32_t addr) +{ + mmio_write_32(base + OTPC_CPUADDR_REG_OFFSET, addr & OTPC_ADDR_MASK); +} + +static inline void set_start_bit(uint32_t base) +{ + mmio_write_32(base + OTPC_CMD_START_OFFSET, 1 << OTPC_CMD_START_START); +} + +static inline void reset_start_bit(uint32_t base) +{ + mmio_write_32(base + OTPC_CMD_START_OFFSET, 0); +} + +static inline void write_cpu_data(uint32_t base, uint32_t value) +{ + mmio_write_32(base + OTPC_CPU_WRITE_REG_OFFSET, value); +} + +static int poll_cpu_status(uint32_t base, uint32_t value) +{ + uint32_t status; + uint32_t retries; + + for (retries = 0; retries < OTPC_RETRIES_US; retries++) { + status = mmio_read_32(base + OTPC_CPU_STATUS_OFFSET); + if (status & value) + break; + udelay(1); + } + if (retries == OTPC_RETRIES_US) + return -1; + + return 0; +} + +static int bcm_otpc_ecc(uint32_t enable) +{ + struct otpc_priv *priv = &otpc_info; + int ret; + + set_command(priv->base, OTPC_CMD_ECC); + set_cpu_address(priv->base, OTPC_ECC_ADDR); + + if (!enable) + write_cpu_data(priv->base, OTPC_ECC_VAL); + else + write_cpu_data(priv->base, ~OTPC_ECC_VAL); + + set_start_bit(priv->base); + ret = poll_cpu_status(priv->base, OTPC_STAT_CMD_DONE); + if (ret) { + ERROR("otp ecc op error: 0x%x", ret); + return -1; + } + reset_start_bit(priv->base); + + return 0; +} + +/* + * bcm_otpc_read read otp data in the size of 8 byte rows. + * bytes has to be the multiple of 8. + * return -1 in error case, return read bytes in success. + */ +int bcm_otpc_read(unsigned int offset, void *val, uint32_t bytes, + uint32_t ecc_flag) +{ + struct otpc_priv *priv = &otpc_info; + uint32_t *buf = val; + uint32_t bytes_read; + uint32_t address = offset / priv->map->word_size; + int i, ret; + + if (!priv->state) { + ERROR("OCOTP read failed\n"); + return -1; + } + + bcm_otpc_ecc(ecc_flag); + + for (bytes_read = 0; (bytes_read + priv->map->word_size) <= bytes;) { + set_command(priv->base, OTPC_CMD_READ); + set_cpu_address(priv->base, address++); + set_start_bit(priv->base); + ret = poll_cpu_status(priv->base, OTPC_STAT_CMD_DONE); + if (ret) { + ERROR("otp read error: 0x%x", ret); + return -1; + } + + for (i = 0; i < priv->map->otpc_row_size; i++) { + *buf++ = mmio_read_32(priv->base + + priv->map->data_r_offset[i]); + bytes_read += sizeof(*buf); + } + + reset_start_bit(priv->base); + } + + return bytes_read; +} + +int bcm_otpc_init(struct otpc_map *map) +{ + struct otpc_priv *priv; + + priv = &otpc_info; + priv->base = ocotp_cfg.base; + priv->map = map; + + priv->size = 4 * ocotp_cfg.num_words; + + /* Enable CPU access to OTPC. */ + mmio_setbits_32(priv->base + OTPC_MODE_REG_OFFSET, + BIT(OTPC_MODE_REG_OTPC_MODE)); + reset_start_bit(priv->base); + priv->state = 1; + VERBOSE("OTPC Initialization done\n"); + + return 0; +} diff --git a/drivers/brcm/rng.c b/drivers/brcm/rng.c new file mode 100644 index 0000000..ee2e656 --- /dev/null +++ b/drivers/brcm/rng.c @@ -0,0 +1,97 @@ +/* + * Copyright (c) 2017 - 2020, Broadcom + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include +#include +#include +#include + +#define RNG_CTRL_REG (RNG_BASE_ADDR + 0x00) +#define RNG_CTRL_MASK 0x00001FFF +#define RNG_CTRL_ENABLE 0x00000001 +#define RNG_CTRL_DISABLE 0x00000000 + +#define RNG_SOFT_RESET_REG (RNG_BASE_ADDR + 0x04) +#define RNG_SOFT_RESET_MASK 0x00000001 + +#define RNG_FIFO_DATA_REG (RNG_BASE_ADDR + 0x20) + +#define RNG_FIFO_COUNT_REG (RNG_BASE_ADDR + 0x24) +#define RNG_FIFO_COUNT_MASK 0x000000FF + +#define RNG_FIFO_WORDS_MAX 16 +#define MAX_WAIT_COUNT_50US 20000 + + +static void rng_reset(void) +{ + /* Disable RBG */ + mmio_clrbits_32(RNG_CTRL_REG, RNG_CTRL_MASK); + + /* Reset RNG and RBG */ + mmio_setbits_32(RNG_SOFT_RESET_REG, RNG_SOFT_RESET_MASK); + + /* Take all out of reset */ + mmio_clrbits_32(RNG_SOFT_RESET_REG, RNG_SOFT_RESET_MASK); +} + +static void rng_enable(void) +{ + /* Setup RNG. */ + mmio_clrsetbits_32(RNG_CTRL_REG, RNG_CTRL_MASK, RNG_CTRL_ENABLE); +} + +int rng_init(void) +{ + rng_reset(); + + rng_enable(); + + return 0; +} + +int rng_read(uint32_t *p_out, uint32_t *words_read) +{ + uint32_t available_words; + uint32_t i; + uint32_t word_processed = 0; + uint32_t wait_count = MAX_WAIT_COUNT_50US; + + if (*words_read == 0) { + ERROR("RNG Parameter: No word requested\n"); + return -1; + } + + do { + available_words = mmio_read_32(RNG_FIFO_COUNT_REG); + available_words &= RNG_FIFO_COUNT_MASK; + + if (available_words != 0) { + available_words = MIN(available_words, + *words_read - word_processed); + + for (i = 0; i < available_words; i++) + p_out[word_processed + i] = + mmio_read_32(RNG_FIFO_DATA_REG); + word_processed += available_words; + } else { + udelay(50); + } + + if (word_processed == *words_read) + break; + + } while (--wait_count); + + if (word_processed != *words_read) { + ERROR("RNG Timeout: requested %d word(s) got %d\n", + *words_read, word_processed); + *words_read = word_processed; + return -1; + } + + return 0; +} diff --git a/drivers/brcm/scp.c b/drivers/brcm/scp.c new file mode 100644 index 0000000..6196073 --- /dev/null +++ b/drivers/brcm/scp.c @@ -0,0 +1,100 @@ +/* + * Copyright (c) 2017 - 2020, Broadcom + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include + +#include +#include + +/* MCU binary image structure:
+ * + * Header structure: + * + * + * { }* + * + * + * MCU data () consists of several sections of code/data, to be + * installed (copied) into MCU memories. + * Header (
) gives information about sections contained in . + * + * The installer code iterates over sections in MCU binary. + * For each section, it copies the section into MCU memory. + * + * The header contains: + * - - 32-bit magic number to mark header start + * - - number of sections in + * - tuples. Each tuple describes a section. + * A tuple contains three 32-bit words. + * - - 32-bit magic number to mark header end + * + * Each section is describes by a tuple, consisting of three 32-bit words: + * - offset of section within MCU binary (relative to beginning of ) + * - section size (in bytes) in MCU binary + * - target address (in MCU memory). Section is copied to this location. + * + * All fields are 32-bit unsigned integers in little endian format. + * All sizes are assumed to be 32-bit aligned. + */ + +#define SCP_BIN_HEADER_MAGIC_START 0xfa587D01 +#define SCP_BIN_HEADER_MAGIC_END 0xf3e06a85 + +int download_scp_patch(void *image, unsigned int image_size) +{ + unsigned int *pheader = (unsigned int *)(image); + unsigned int header_size; + unsigned char *pdata; + void *dest; + unsigned int num_sections; + unsigned int section_src_offset; + unsigned int section_size; + + if (pheader && (pheader[0] != SCP_BIN_HEADER_MAGIC_START)) { + ERROR("SCP: Could not find SCP header.\n"); + return -1; + } + + num_sections = pheader[1]; + INFO("...Number of sections: %d\n", num_sections); + header_size = 4 * (1 + 1 + 3 * num_sections + 1); + + if (image_size < header_size) { + ERROR("SCP: Wrong size.\n"); + return -1; + } + + if (*(pheader + header_size/4 - 1) != SCP_BIN_HEADER_MAGIC_END) { + ERROR("SCP: Could not find SCP footer.\n"); + return -1; + } + + VERBOSE("SCP image header validated successfully\n"); + pdata = (unsigned char *)pheader + header_size; + + for (pheader += 2; num_sections > 0; num_sections--) { + + section_src_offset = pheader[0]; + section_size = pheader[1]; + dest = (void *)(unsigned long)pheader[2]; + + INFO("section: src:0x%x, size:%d, dst:0x%x\n", + section_src_offset, section_size, pheader[2]); + + if ((section_src_offset + section_size) > image_size) { + ERROR("SCP: Section points to outside of patch.\n"); + return -1; + } + + /* copy from source to target section */ + memcpy(dest, pdata + section_src_offset, section_size); + flush_dcache_range((uintptr_t)dest, section_size); + + /* next section */ + pheader += 3; + } + return 0; +} diff --git a/drivers/brcm/sotp.c b/drivers/brcm/sotp.c new file mode 100644 index 0000000..20c6441 --- /dev/null +++ b/drivers/brcm/sotp.c @@ -0,0 +1,323 @@ +/* + * Copyright (c) 2016-2020, Broadcom + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include + +#include +#include +#include + +#include +#include + +#ifdef USE_SOFT_SOTP +extern uint64_t soft_sotp[]; +#endif + +#define SOTP_PROG_CONTROL (SOTP_REGS_OTP_BASE + 0x0000) +#define SOTP_PROG_CONTROL__OTP_CPU_MODE_EN 15 +#define SOTP_PROG_CONTROL__OTP_DISABLE_ECC 9 +#define SOTP_PROG_CONTROL__OTP_ECC_WREN 8 + +#define SOTP_WRDATA_0 (SOTP_REGS_OTP_BASE + 0x0004) +#define SOTP_WRDATA_1 (SOTP_REGS_OTP_BASE + 0x0008) + +#define SOTP_ADDR (SOTP_REGS_OTP_BASE + 0x000c) +#define SOTP_ADDR__OTP_ROW_ADDR_R 6 +#define SOTP_ADDR_MASK 0x3FF + +#define SOTP_CTRL_0 (SOTP_REGS_OTP_BASE + 0x0010) +#define SOTP_CTRL_0__START 0 +#define SOTP_CTRL_0__OTP_CMD 1 + +#define SOTP_STATUS_0 (SOTP_REGS_OTP_BASE + 0x0018) +#define SOTP_STATUS__FDONE 3 + +#define SOTP_STATUS_1 (SOTP_REGS_OTP_BASE + 0x001c) +#define SOTP_STATUS_1__CMD_DONE 1 +#define SOTP_STATUS_1__ECC_DET 17 + +#define SOTP_RDDATA_0 (SOTP_REGS_OTP_BASE + 0x0020) +#define SOTP_RDDATA_1 (SOTP_REGS_OTP_BASE + 0x0024) + +#define SOTP_READ 0 + +#define SOTP_PROG_WORD 10 +#define SOTP_STATUS__PROGOK 2 +#define SOTP_PROG_ENABLE 2 + +#define SOTP_ROW_DATA_MASK 0xffffffff +#define SOTP_ECC_ERR_BITS_MASK 0x1ff00000000 + +#define SOTP_CHIP_CTRL_SW_OVERRIDE_CHIP_STATES 4 +#define SOTP_CHIP_CTRL_SW_MANU_PROG 5 +#define SOTP_CHIP_CTRL_SW_CID_PROG 6 +#define SOTP_CHIP_CTRL_SW_AB_DEVICE 8 +#define SOTP_CHIP_CTRL_SW_AB_DEV_MODE 9 +#define CHIP_STATE_UNPROGRAMMED 0x1 +#define CHIP_STATE_UNASSIGNED 0x2 + +uint64_t sotp_mem_read(uint32_t offset, uint32_t sotp_add_ecc) +{ +#ifdef USE_SOFT_SOTP + (void)sotp_add_ecc; + + return soft_sotp[offset]; +#else + uint64_t read_data = 0; + uint64_t read_data1 = 0; + uint64_t read_data2 = 0; + + /* Check for FDONE status */ + while ((mmio_read_32(SOTP_STATUS_0) & BIT(SOTP_STATUS__FDONE)) != + BIT(SOTP_STATUS__FDONE)) + ; + + /* Enable OTP access by CPU */ + mmio_setbits_32(SOTP_PROG_CONTROL, + BIT(SOTP_PROG_CONTROL__OTP_CPU_MODE_EN)); + + if (sotp_add_ecc == 1) { + mmio_clrbits_32(SOTP_PROG_CONTROL, + BIT(SOTP_PROG_CONTROL__OTP_DISABLE_ECC)); + } + + if (sotp_add_ecc == 0) { + mmio_setbits_32(SOTP_PROG_CONTROL, + BIT(SOTP_PROG_CONTROL__OTP_DISABLE_ECC)); + } + + mmio_write_32(SOTP_ADDR, + ((offset & SOTP_ADDR_MASK) << SOTP_ADDR__OTP_ROW_ADDR_R)); + mmio_write_32(SOTP_CTRL_0, (SOTP_READ << SOTP_CTRL_0__OTP_CMD)); + + /* Start bit to tell SOTP to send command to the OTP controller */ + mmio_setbits_32(SOTP_CTRL_0, BIT(SOTP_CTRL_0__START)); + + /* Wait for SOTP command done to be set */ + while ((mmio_read_32(SOTP_STATUS_1) & BIT(SOTP_STATUS_1__CMD_DONE)) != + BIT(SOTP_STATUS_1__CMD_DONE)) + ; + + /* Clr Start bit after command done */ + mmio_clrbits_32(SOTP_CTRL_0, BIT(SOTP_CTRL_0__START)); + + if ((offset > SOTP_DEVICE_SECURE_CFG3_ROW) && + (mmio_read_32(SOTP_STATUS_1) & BIT(SOTP_STATUS_1__ECC_DET))) { + ERROR("SOTP ECC ERROR Detected row offset %d\n", offset); + read_data = SOTP_ECC_ERR_DETECT; + } else { + read_data1 = (uint64_t)mmio_read_32(SOTP_RDDATA_0); + read_data1 = read_data1 & 0xFFFFFFFF; + read_data2 = (uint64_t)mmio_read_32(SOTP_RDDATA_1); + read_data2 = (read_data2 & 0x1ff) << 32; + read_data = read_data1 | read_data2; + } + + /* Command done is cleared */ + mmio_setbits_32(SOTP_STATUS_1, BIT(SOTP_STATUS_1__CMD_DONE)); + + /* disable OTP access by CPU */ + mmio_clrbits_32(SOTP_PROG_CONTROL, + BIT(SOTP_PROG_CONTROL__OTP_CPU_MODE_EN)); + + return read_data; +#endif +} + +void sotp_mem_write(uint32_t addr, uint32_t sotp_add_ecc, uint64_t wdata) +{ +#ifdef USE_SOFT_SOTP + (void)sotp_add_ecc; + + soft_sotp[addr] = wdata; +#else + uint32_t loop; + uint8_t prog_array[4] = { 0x0F, 0x04, 0x08, 0x0D }; + + uint32_t chip_state_default = + (CHIP_STATE_UNASSIGNED|CHIP_STATE_UNPROGRAMMED); + uint32_t chip_state = mmio_read_32(SOTP_REGS_SOTP_CHIP_STATES); + uint32_t chip_ctrl_default = 0; + + /* + * The override settings is required to allow the customer to program + * the application specific keys into SOTP, before the conversion to + * one of the AB modes. + * At the end of write operation, the chip ctrl settings will restored + * to the state prior to write call + */ + if (chip_state & chip_state_default) { + uint32_t chip_ctrl; + + chip_ctrl_default = mmio_read_32(SOTP_CHIP_CTRL); + INFO("SOTP: enable special prog mode\n"); + + chip_ctrl = BIT(SOTP_CHIP_CTRL_SW_OVERRIDE_CHIP_STATES) | + BIT(SOTP_CHIP_CTRL_SW_MANU_PROG) | + BIT(SOTP_CHIP_CTRL_SW_CID_PROG) | + BIT(SOTP_CHIP_CTRL_SW_AB_DEVICE); + mmio_write_32(SOTP_CHIP_CTRL, chip_ctrl); + } + + /* Check for FDONE status */ + while ((mmio_read_32(SOTP_STATUS_0) & BIT(SOTP_STATUS__FDONE)) != + BIT(SOTP_STATUS__FDONE)) + ; + + /* Enable OTP access by CPU */ + mmio_setbits_32(SOTP_PROG_CONTROL, + BIT(SOTP_PROG_CONTROL__OTP_CPU_MODE_EN)); + + if (addr > SOTP_DEVICE_SECURE_CFG3_ROW) { + if (sotp_add_ecc == 0) { + mmio_clrbits_32(SOTP_PROG_CONTROL, + BIT(SOTP_PROG_CONTROL__OTP_ECC_WREN)); + } + if (sotp_add_ecc == 1) { + mmio_setbits_32(SOTP_PROG_CONTROL, + BIT(SOTP_PROG_CONTROL__OTP_ECC_WREN)); + } + } else { + mmio_clrbits_32(SOTP_PROG_CONTROL, + BIT(SOTP_PROG_CONTROL__OTP_ECC_WREN)); + } + + mmio_write_32(SOTP_CTRL_0, (SOTP_PROG_ENABLE << 1)); + + /* + * In order to avoid unintentional writes / programming of the OTP + * array, the OTP Controller must be put into programming mode before + * it will accept program commands. This is done by writing 0xF, 0x4, + * 0x8, 0xD with program commands prior to starting the actual + * programming sequence + */ + for (loop = 0; loop < 4; loop++) { + mmio_write_32(SOTP_WRDATA_0, prog_array[loop]); + + /* + * Start bit to tell SOTP to send command to the OTP controller + */ + mmio_setbits_32(SOTP_CTRL_0, BIT(SOTP_CTRL_0__START)); + + /* Wait for SOTP command done to <-- be set */ + while ((mmio_read_32(SOTP_STATUS_1) & + BIT(SOTP_STATUS_1__CMD_DONE)) != + BIT(SOTP_STATUS_1__CMD_DONE)) + ; + + /* Command done is cleared w1c */ + mmio_setbits_32(SOTP_STATUS_1, BIT(SOTP_STATUS_1__CMD_DONE)); + + /* Clr Start bit after command done */ + mmio_clrbits_32(SOTP_CTRL_0, BIT(SOTP_CTRL_0__START)); + } + + /* Check for PROGOK */ + while ((mmio_read_32(SOTP_STATUS_0) & 0x4) != BIT(SOTP_STATUS__PROGOK)) + ; + + /* Set 10 bit row address */ + mmio_write_32(SOTP_ADDR, + ((addr & SOTP_ADDR_MASK) << SOTP_ADDR__OTP_ROW_ADDR_R)); + + /* Set SOTP Row data */ + mmio_write_32(SOTP_WRDATA_0, (wdata & SOTP_ROW_DATA_MASK)); + + /* Set SOTP ECC and error bits */ + mmio_write_32(SOTP_WRDATA_1, ((wdata & SOTP_ECC_ERR_BITS_MASK) >> 32)); + + /* Set prog_word command */ + mmio_write_32(SOTP_CTRL_0, (SOTP_PROG_WORD << 1)); + + /* Start bit to tell SOTP to send command to the OTP controller */ + mmio_setbits_32(SOTP_CTRL_0, BIT(SOTP_CTRL_0__START)); + + /* Wait for SOTP command done to be set */ + while ((mmio_read_32(SOTP_STATUS_1) & BIT(SOTP_STATUS_1__CMD_DONE)) != + BIT(SOTP_STATUS_1__CMD_DONE)) + ; + + /* Command done is cleared w1c */ + mmio_setbits_32(SOTP_STATUS_1, BIT(SOTP_STATUS_1__CMD_DONE)); + + /* disable OTP access by CPU */ + mmio_clrbits_32(SOTP_PROG_CONTROL, + BIT(SOTP_PROG_CONTROL__OTP_CPU_MODE_EN)); + + /* Clr Start bit after command done */ + mmio_clrbits_32(SOTP_CTRL_0, BIT(SOTP_CTRL_0__START)); + + if (chip_state & chip_state_default) + mmio_write_32(SOTP_CHIP_CTRL, chip_ctrl_default); + +#endif +} + +int sotp_read_key(uint8_t *key, size_t keysize, int start_row, int end_row) +{ + int row; + uint32_t status = 0; + uint32_t status2 = 0xFFFFFFFF; + uint64_t row_data; + uint32_t data; + uint32_t *temp_key = (uint32_t *)key; + + row = start_row; + while ((keysize > 0) && (row <= end_row)) { + row_data = sotp_mem_read(row, SOTP_ROW_ECC); + if (!(row_data & (SOTP_ECC_ERR_DETECT | SOTP_FAIL_BITS))) { + memcpy(temp_key++, &row_data, sizeof(uint32_t)); + keysize -= sizeof(uint32_t); + data = (uint32_t)(row_data & SOTP_ROW_DATA_MASK); + status |= data; + status2 &= data; + } + row++; + } + + if ((status2 == 0xFFFFFFFF) || (status == 0) || (row > end_row)) + return -1; + + return 0; +} + +int sotp_key_erased(void) +{ + uint64_t row_data; + int status = 0; + + row_data = sotp_mem_read(SOTP_DEVICE_SECURE_CFG0_ROW, 0); + if (row_data & SOTP_DEVICE_SECURE_CFG0_OTP_ERASED_MASK) + status = 1; + + else if (mmio_read_32(SOTP_REGS_SOTP_CHIP_STATES) & + SOTP_REGS_SOTP_CHIP_STATES_OTP_ERASED_MASK) + status = 1; + + return status; +} + +/* + * This function optimise the SOTP redundancy + * by considering the 00- zero and 01,10,11 - one + */ +uint32_t sotp_redundancy_reduction(uint32_t sotp_row_data) +{ + uint32_t opt_data; + uint32_t opt_loop; + uint32_t temp_data; + + opt_data = 0; + + for (opt_loop = 0; opt_loop < 16; opt_loop = opt_loop + 1) { + temp_data = ((sotp_row_data >> (opt_loop * 2)) & 0x3); + + if (temp_data != 0x0) + opt_data = (opt_data | (1 << opt_loop)); + } + return opt_data; +} diff --git a/drivers/brcm/spi/iproc_qspi.c b/drivers/brcm/spi/iproc_qspi.c new file mode 100644 index 0000000..4c533d5 --- /dev/null +++ b/drivers/brcm/spi/iproc_qspi.c @@ -0,0 +1,317 @@ +/* + * Copyright (c) 2017 - 2020, Broadcom + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include + +#include +#include +#include +#include + +#include +#include + +#include "iproc_qspi.h" + +struct bcmspi_priv spi_cfg; + +/* Redefined by platform to force appropriate information */ +#pragma weak plat_spi_init +int plat_spi_init(uint32_t *max_hz) +{ + return 0; +} + +/* Initialize & setup iproc qspi controller */ +int iproc_qspi_setup(uint32_t bus, uint32_t cs, uint32_t max_hz, uint32_t mode) +{ + struct bcmspi_priv *priv = NULL; + uint32_t spbr; + + priv = &spi_cfg; + priv->spi_mode = mode; + priv->state = QSPI_STATE_DISABLED; + priv->bspi_hw = QSPI_BSPI_MODE_REG_BASE; + priv->mspi_hw = QSPI_MSPI_MODE_REG_BASE; + + /* Initialize clock and platform specific */ + if (plat_spi_init(&max_hz) != 0) + return -1; + + priv->max_hz = max_hz; + + /* MSPI: Basic hardware initialization */ + mmio_write_32(priv->mspi_hw + MSPI_SPCR1_LSB_REG, 0); + mmio_write_32(priv->mspi_hw + MSPI_SPCR1_MSB_REG, 0); + mmio_write_32(priv->mspi_hw + MSPI_NEWQP_REG, 0); + mmio_write_32(priv->mspi_hw + MSPI_ENDQP_REG, 0); + mmio_write_32(priv->mspi_hw + MSPI_SPCR2_REG, 0); + + /* MSPI: SCK configuration */ + spbr = (QSPI_AXI_CLK - 1) / (2 * priv->max_hz) + 1; + spbr = MIN(spbr, SPBR_DIV_MAX); + spbr = MAX(spbr, SPBR_DIV_MIN); + mmio_write_32(priv->mspi_hw + MSPI_SPCR0_LSB_REG, spbr); + + /* MSPI: Mode configuration (8 bits by default) */ + priv->mspi_16bit = 0; + mmio_write_32(priv->mspi_hw + MSPI_SPCR0_MSB_REG, + BIT(MSPI_SPCR0_MSB_REG_MSTR_SHIFT) | /* Master */ + MSPI_SPCR0_MSB_REG_16_BITS_PER_WD_SHIFT | /* 16 bits per word */ + (priv->spi_mode & MSPI_SPCR0_MSB_REG_MODE_MASK)); /* mode: CPOL / CPHA */ + + /* Display bus info */ + VERBOSE("SPI: SPCR0_LSB: 0x%x\n", + mmio_read_32(priv->mspi_hw + MSPI_SPCR0_LSB_REG)); + VERBOSE("SPI: SPCR0_MSB: 0x%x\n", + mmio_read_32(priv->mspi_hw + MSPI_SPCR0_MSB_REG)); + VERBOSE("SPI: SPCR1_LSB: 0x%x\n", + mmio_read_32(priv->mspi_hw + MSPI_SPCR1_LSB_REG)); + VERBOSE("SPI: SPCR1_MSB: 0x%x\n", + mmio_read_32(priv->mspi_hw + MSPI_SPCR1_MSB_REG)); + VERBOSE("SPI: SPCR2: 0x%x\n", + mmio_read_32(priv->mspi_hw + MSPI_SPCR2_REG)); + VERBOSE("SPI: CLK: %d\n", priv->max_hz); + + return 0; +} + +void bcmspi_enable_bspi(struct bcmspi_priv *priv) +{ + if (priv->state != QSPI_STATE_BSPI) { + /* Switch to BSPI */ + mmio_write_32(priv->bspi_hw + BSPI_MAST_N_BOOT_CTRL_REG, 0); + + priv->state = QSPI_STATE_BSPI; + } +} + +static int bcmspi_disable_bspi(struct bcmspi_priv *priv) +{ + uint32_t retry; + + if (priv->state == QSPI_STATE_MSPI) + return 0; + + /* Switch to MSPI if not yet */ + if ((mmio_read_32(priv->bspi_hw + BSPI_MAST_N_BOOT_CTRL_REG) & + MSPI_CTRL_MASK) == 0) { + retry = QSPI_RETRY_COUNT_US_MAX; + do { + if ((mmio_read_32( + priv->bspi_hw + BSPI_BUSY_STATUS_REG) & + BSPI_BUSY_MASK) == 0) { + mmio_write_32(priv->bspi_hw + + BSPI_MAST_N_BOOT_CTRL_REG, + MSPI_CTRL_MASK); + udelay(1); + break; + } + udelay(1); + } while (retry--); + + if ((mmio_read_32(priv->bspi_hw + BSPI_MAST_N_BOOT_CTRL_REG) & + MSPI_CTRL_MASK) != MSPI_CTRL_MASK) { + ERROR("QSPI: Switching to QSPI error.\n"); + return -1; + } + } + + /* Update state */ + priv->state = QSPI_STATE_MSPI; + + return 0; +} + +int iproc_qspi_claim_bus(void) +{ + struct bcmspi_priv *priv = &spi_cfg; + + /* Switch to MSPI by default */ + if (bcmspi_disable_bspi(priv) != 0) + return -1; + + return 0; +} + +void iproc_qspi_release_bus(void) +{ + struct bcmspi_priv *priv = &spi_cfg; + + /* Switch to BSPI by default */ + bcmspi_enable_bspi(priv); +} + +static int mspi_xfer(struct bcmspi_priv *priv, uint32_t bytes, + const uint8_t *tx, uint8_t *rx, uint32_t flag) +{ + uint32_t retry; + uint32_t mode = CDRAM_PCS0; + + if (flag & SPI_XFER_QUAD) { + mode |= CDRAM_QUAD_MODE; + VERBOSE("SPI: QUAD mode\n"); + + if (!tx) { + VERBOSE("SPI: 4 lane input\n"); + mode |= CDRAM_RBIT_INPUT; + } + } + + /* Use 8-bit queue for odd-bytes transfer */ + if (bytes & 1) + priv->mspi_16bit = 0; + else { + priv->mspi_16bit = 1; + mode |= CDRAM_BITS_EN; + } + + while (bytes) { + uint32_t chunk; + uint32_t queues; + uint32_t i; + + /* Separate code for 16bit and 8bit transfers for performance */ + if (priv->mspi_16bit) { + VERBOSE("SPI: 16 bits xfer\n"); + /* Determine how many bytes to process this time */ + chunk = MIN(bytes, NUM_CDRAM_BYTES * 2); + queues = (chunk - 1) / 2 + 1; + bytes -= chunk; + + /* Fill CDRAMs */ + for (i = 0; i < queues; i++) + mmio_write_32(priv->mspi_hw + MSPI_CDRAM_REG + + (i << 2), mode | CDRAM_CONT); + + /* Fill TXRAMs */ + for (i = 0; i < chunk; i++) + if (tx) + mmio_write_32(priv->mspi_hw + + MSPI_TXRAM_REG + + (i << 2), tx[i]); + } else { + VERBOSE("SPI: 8 bits xfer\n"); + /* Determine how many bytes to process this time */ + chunk = MIN(bytes, NUM_CDRAM_BYTES); + queues = chunk; + bytes -= chunk; + + /* Fill CDRAMs and TXRAMS */ + for (i = 0; i < chunk; i++) { + mmio_write_32(priv->mspi_hw + MSPI_CDRAM_REG + + (i << 2), mode | CDRAM_CONT); + if (tx) + mmio_write_32(priv->mspi_hw + + MSPI_TXRAM_REG + + (i << 3), tx[i]); + } + } + + /* Advance pointers */ + if (tx) + tx += chunk; + + /* Setup queue pointers */ + mmio_write_32(priv->mspi_hw + MSPI_NEWQP_REG, 0); + mmio_write_32(priv->mspi_hw + MSPI_ENDQP_REG, queues - 1); + + /* Remove CONT on the last byte command */ + if (bytes == 0 && (flag & SPI_XFER_END)) + mmio_write_32(priv->mspi_hw + MSPI_CDRAM_REG + + ((queues - 1) << 2), mode); + + /* Kick off */ + mmio_write_32(priv->mspi_hw + MSPI_STATUS_REG, 0); + if (bytes == 0 && (flag & SPI_XFER_END)) + mmio_write_32(priv->mspi_hw + MSPI_SPCR2_REG, MSPI_SPE); + else + mmio_write_32(priv->mspi_hw + MSPI_SPCR2_REG, + MSPI_SPE | MSPI_CONT_AFTER_CMD); + + /* Wait for completion */ + retry = QSPI_RETRY_COUNT_US_MAX; + do { + if (mmio_read_32(priv->mspi_hw + MSPI_STATUS_REG) & + MSPI_CMD_COMPLETE_MASK) + break; + udelay(1); + } while (retry--); + + if ((mmio_read_32(priv->mspi_hw + MSPI_STATUS_REG) & + MSPI_CMD_COMPLETE_MASK) == 0) { + ERROR("SPI: Completion timeout.\n"); + return -1; + } + + /* Read data out */ + if (rx) { + if (priv->mspi_16bit) { + for (i = 0; i < chunk; i++) { + rx[i] = mmio_read_32(priv->mspi_hw + + MSPI_RXRAM_REG + + (i << 2)) + & 0xff; + } + } else { + for (i = 0; i < chunk; i++) { + rx[i] = mmio_read_32(priv->mspi_hw + + MSPI_RXRAM_REG + + (((i << 1) + 1) << 2)) + & 0xff; + } + } + rx += chunk; + } + } + + return 0; +} + +int iproc_qspi_xfer(uint32_t bitlen, + const void *dout, void *din, unsigned long flags) +{ + struct bcmspi_priv *priv; + const uint8_t *tx = dout; + uint8_t *rx = din; + uint32_t bytes = bitlen / 8; + int ret = 0; + + priv = &spi_cfg; + + if (priv->state == QSPI_STATE_DISABLED) { + ERROR("QSPI: state disabled\n"); + return -1; + } + + /* we can only do 8 bit transfers */ + if (bitlen % 8) { + ERROR("QSPI: Only support 8 bit transfers (requested %d)\n", + bitlen); + return -1; + } + + /* MSPI: Enable write lock at the beginning */ + if (flags & SPI_XFER_BEGIN) { + /* Switch to MSPI if not yet */ + if (bcmspi_disable_bspi(priv) != 0) { + ERROR("QSPI: Switch to MSPI failed\n"); + return -1; + } + + mmio_write_32(priv->mspi_hw + MSPI_WRITE_LOCK_REG, 1); + } + + /* MSPI: Transfer it */ + if (bytes) + ret = mspi_xfer(priv, bytes, tx, rx, flags); + + /* MSPI: Disable write lock if it's done */ + if (flags & SPI_XFER_END) + mmio_write_32(priv->mspi_hw + MSPI_WRITE_LOCK_REG, 0); + + return ret; +} diff --git a/drivers/brcm/spi/iproc_qspi.h b/drivers/brcm/spi/iproc_qspi.h new file mode 100644 index 0000000..7a8bd91 --- /dev/null +++ b/drivers/brcm/spi/iproc_qspi.h @@ -0,0 +1,107 @@ +/* + * Copyright (c) 2017 - 2020, Broadcom + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef IPROC_QSPI_H +#define IPROC_QSPI_H + +#include + +/*SPI configuration enable*/ +#define IPROC_QSPI_CLK_SPEED 62500000 +#define SPI_CPHA (1 << 0) +#define SPI_CPOL (1 << 1) +#define IPROC_QSPI_MODE0 0 +#define IPROC_QSPI_MODE3 (SPI_CPOL|SPI_CPHA) + +#define IPROC_QSPI_BUS 0 +#define IPROC_QSPI_CS 0 +#define IPROC_QSPI_BASE_REG QSPI_CTRL_BASE_ADDR +#define IPROC_QSPI_CRU_CONTROL_REG QSPI_CLK_CTRL + +#define QSPI_AXI_CLK 200000000 + +#define QSPI_RETRY_COUNT_US_MAX 200000 + +/* Chip attributes */ +#define QSPI_REG_BASE IPROC_QSPI_BASE_REG +#define CRU_CONTROL_REG IPROC_QSPI_CRU_CONTROL_REG +#define SPBR_DIV_MIN 8U +#define SPBR_DIV_MAX 255U +#define NUM_CDRAM_BYTES 16U + +/* Register fields */ +#define MSPI_SPCR0_MSB_BITS_8 0x00000020 + +/* Flash opcode and parameters */ +#define CDRAM_PCS0 2 +#define CDRAM_CONT (1 << 7) +#define CDRAM_BITS_EN (1 << 6) +#define CDRAM_QUAD_MODE (1 << 8) +#define CDRAM_RBIT_INPUT (1 << 10) + +/* MSPI registers */ +#define QSPI_MSPI_MODE_REG_BASE (QSPI_REG_BASE + 0x200) +#define MSPI_SPCR0_LSB_REG 0x000 +#define MSPI_SPCR0_MSB_REG 0x004 +#define MSPI_SPCR1_LSB_REG 0x008 +#define MSPI_SPCR1_MSB_REG 0x00c +#define MSPI_NEWQP_REG 0x010 +#define MSPI_ENDQP_REG 0x014 +#define MSPI_SPCR2_REG 0x018 +#define MSPI_STATUS_REG 0x020 +#define MSPI_CPTQP_REG 0x024 +#define MSPI_TXRAM_REG 0x040 +#define MSPI_RXRAM_REG 0x0c0 +#define MSPI_CDRAM_REG 0x140 +#define MSPI_WRITE_LOCK_REG 0x180 +#define MSPI_DISABLE_FLUSH_GEN_REG 0x184 + +#define MSPI_SPCR0_MSB_REG_MSTR_SHIFT 7 +#define MSPI_SPCR0_MSB_REG_16_BITS_PER_WD_SHIFT (0 << 2) +#define MSPI_SPCR0_MSB_REG_MODE_MASK 0x3 + +/* BSPI registers */ +#define QSPI_BSPI_MODE_REG_BASE QSPI_REG_BASE +#define BSPI_MAST_N_BOOT_CTRL_REG 0x008 +#define BSPI_BUSY_STATUS_REG 0x00c + +#define MSPI_CMD_COMPLETE_MASK 1 +#define BSPI_BUSY_MASK 1 +#define MSPI_CTRL_MASK 1 + +#define MSPI_SPE (1 << 6) +#define MSPI_CONT_AFTER_CMD (1 << 7) + +/* State */ +enum bcm_qspi_state { + QSPI_STATE_DISABLED, + QSPI_STATE_MSPI, + QSPI_STATE_BSPI +}; + +/* QSPI private data */ +struct bcmspi_priv { + /* Specified SPI parameters */ + uint32_t max_hz; + uint32_t spi_mode; + + /* State */ + enum bcm_qspi_state state; + int mspi_16bit; + + /* Registers */ + uintptr_t mspi_hw; + uintptr_t bspi_hw; +}; + +int iproc_qspi_setup(uint32_t bus, uint32_t cs, + uint32_t max_hz, uint32_t mode); +int iproc_qspi_claim_bus(void); +void iproc_qspi_release_bus(void); +int iproc_qspi_xfer(uint32_t bitlen, const void *dout, + void *din, unsigned long flags); + +#endif /* _IPROC_QSPI_H_ */ diff --git a/drivers/brcm/spi/iproc_spi.c b/drivers/brcm/spi/iproc_spi.c new file mode 100644 index 0000000..551e587 --- /dev/null +++ b/drivers/brcm/spi/iproc_spi.c @@ -0,0 +1,31 @@ +/* + * Copyright (c) 2017 - 2020, Broadcom + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include + +#include "iproc_qspi.h" + +int spi_init(void) +{ + return iproc_qspi_setup(IPROC_QSPI_BUS, IPROC_QSPI_CS, + IPROC_QSPI_CLK_SPEED, IPROC_QSPI_MODE0); +} + +int spi_claim_bus(void) +{ + return iproc_qspi_claim_bus(); +} + +void spi_release_bus(void) +{ + iproc_qspi_release_bus(); +} + +int spi_xfer(uint32_t bitlen, const void *dout, + void *din, uint32_t flags) +{ + return iproc_qspi_xfer(bitlen, dout, din, flags); +} diff --git a/drivers/brcm/spi_flash.c b/drivers/brcm/spi_flash.c new file mode 100644 index 0000000..336d230 --- /dev/null +++ b/drivers/brcm/spi_flash.c @@ -0,0 +1,308 @@ +/* + * Copyright (c) 2019-2020, Broadcom + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include +#include +#include + +#include +#include +#include + +#include +#include + +#define SPI_FLASH_CMD_LEN 4 +#define QSPI_WAIT_TIMEOUT_US 200000U /* usec */ + +#define FINFO(jedec_id, ext_id, _sector_size, _n_sectors, _page_size, _flags) \ + .id = { \ + ((jedec_id) >> 16) & 0xff, \ + ((jedec_id) >> 8) & 0xff, \ + (jedec_id) & 0xff, \ + ((ext_id) >> 8) & 0xff, \ + (ext_id) & 0xff, \ + }, \ + .id_len = (!(jedec_id) ? 0 : (3 + ((ext_id) ? 2 : 0))), \ + .sector_size = (_sector_size), \ + .n_sectors = (_n_sectors), \ + .page_size = _page_size, \ + .flags = (_flags), + +/* SPI/QSPI flash device params structure */ +const struct spi_flash_info spi_flash_ids[] = { + {"W25Q64CV", FINFO(0xef4017, 0x0, 64 * 1024, 128, 256, WR_QPP | SECT_4K)}, + {"W25Q64DW", FINFO(0xef6017, 0x0, 64 * 1024, 128, 256, WR_QPP | SECT_4K)}, + {"W25Q32", FINFO(0xef4016, 0x0, 64 * 1024, 64, 256, SECT_4K)}, + {"MX25l3205D", FINFO(0xc22016, 0x0, 64 * 1024, 64, 256, SECT_4K)}, +}; + +static void spi_flash_addr(uint32_t addr, uint8_t *cmd) +{ + /* + * cmd[0] holds a SPI Flash command, stored earlier + * cmd[1/2/3] holds 24bit flash address + */ + cmd[1] = addr >> 16; + cmd[2] = addr >> 8; + cmd[3] = addr >> 0; +} + +static const struct spi_flash_info *spi_flash_read_id(void) +{ + const struct spi_flash_info *info; + uint8_t id[SPI_FLASH_MAX_ID_LEN]; + int ret; + + ret = spi_flash_cmd(CMD_READ_ID, id, SPI_FLASH_MAX_ID_LEN); + if (ret < 0) { + ERROR("SF: Error %d reading JEDEC ID\n", ret); + return NULL; + } + + for (info = spi_flash_ids; info->name != NULL; info++) { + if (info->id_len) { + if (!memcmp(info->id, id, info->id_len)) + return info; + } + } + + printf("SF: unrecognized JEDEC id bytes: %02x, %02x, %02x\n", + id[0], id[1], id[2]); + return NULL; +} + +/* Enable writing on the SPI flash */ +static inline int spi_flash_cmd_write_enable(struct spi_flash *flash) +{ + return spi_flash_cmd(CMD_WRITE_ENABLE, NULL, 0); +} + +static int spi_flash_cmd_wait(struct spi_flash *flash) +{ + uint8_t cmd; + uint32_t i; + uint8_t status; + int ret; + + i = 0; + while (1) { + cmd = CMD_RDSR; + ret = spi_flash_cmd_read(&cmd, 1, &status, 1); + if (ret < 0) { + ERROR("SF: cmd wait failed\n"); + break; + } + if (!(status & STATUS_WIP)) + break; + + i++; + if (i >= QSPI_WAIT_TIMEOUT_US) { + ERROR("SF: cmd wait timeout\n"); + ret = -1; + break; + } + udelay(1); + } + + return ret; +} + +static int spi_flash_write_common(struct spi_flash *flash, const uint8_t *cmd, + size_t cmd_len, const void *buf, + size_t buf_len) +{ + int ret; + + ret = spi_flash_cmd_write_enable(flash); + if (ret < 0) { + ERROR("SF: enabling write failed\n"); + return ret; + } + + ret = spi_flash_cmd_write(cmd, cmd_len, buf, buf_len); + if (ret < 0) { + ERROR("SF: write cmd failed\n"); + return ret; + } + + ret = spi_flash_cmd_wait(flash); + if (ret < 0) { + ERROR("SF: write timed out\n"); + return ret; + } + + return ret; +} + +static int spi_flash_read_common(const uint8_t *cmd, size_t cmd_len, + void *data, size_t data_len) +{ + int ret; + + ret = spi_flash_cmd_read(cmd, cmd_len, data, data_len); + if (ret < 0) { + ERROR("SF: read cmd failed\n"); + return ret; + } + + return ret; +} + +int spi_flash_read(struct spi_flash *flash, uint32_t offset, + uint32_t len, void *data) +{ + uint32_t read_len = 0, read_addr; + uint8_t cmd[SPI_FLASH_CMD_LEN]; + int ret; + + ret = spi_claim_bus(); + if (ret) { + ERROR("SF: unable to claim SPI bus\n"); + return ret; + } + + cmd[0] = CMD_READ_NORMAL; + while (len) { + read_addr = offset; + read_len = MIN(flash->page_size, (len - read_len)); + spi_flash_addr(read_addr, cmd); + + ret = spi_flash_read_common(cmd, sizeof(cmd), data, read_len); + if (ret < 0) { + ERROR("SF: read failed\n"); + break; + } + + offset += read_len; + len -= read_len; + data += read_len; + } + SPI_DEBUG("SF read done\n"); + + spi_release_bus(); + return ret; +} + +int spi_flash_write(struct spi_flash *flash, uint32_t offset, + uint32_t len, void *buf) +{ + unsigned long byte_addr, page_size; + uint8_t cmd[SPI_FLASH_CMD_LEN]; + uint32_t chunk_len, actual; + uint32_t write_addr; + int ret; + + ret = spi_claim_bus(); + if (ret) { + ERROR("SF: unable to claim SPI bus\n"); + return ret; + } + + page_size = flash->page_size; + + cmd[0] = flash->write_cmd; + for (actual = 0; actual < len; actual += chunk_len) { + write_addr = offset; + byte_addr = offset % page_size; + chunk_len = MIN(len - actual, + (uint32_t)(page_size - byte_addr)); + spi_flash_addr(write_addr, cmd); + + SPI_DEBUG("SF:0x%p=>cmd:{0x%02x 0x%02x%02x%02x} chunk_len:%d\n", + buf + actual, cmd[0], cmd[1], + cmd[2], cmd[3], chunk_len); + + ret = spi_flash_write_common(flash, cmd, sizeof(cmd), + buf + actual, chunk_len); + if (ret < 0) { + ERROR("SF: write cmd failed\n"); + break; + } + + offset += chunk_len; + } + SPI_DEBUG("SF write done\n"); + + spi_release_bus(); + return ret; +} + +int spi_flash_erase(struct spi_flash *flash, uint32_t offset, uint32_t len) +{ + uint8_t cmd[SPI_FLASH_CMD_LEN]; + uint32_t erase_size, erase_addr; + int ret; + + erase_size = flash->erase_size; + + if (offset % erase_size || len % erase_size) { + ERROR("SF: Erase offset/length not multiple of erase size\n"); + return -1; + } + + ret = spi_claim_bus(); + if (ret) { + ERROR("SF: unable to claim SPI bus\n"); + return ret; + } + + cmd[0] = flash->erase_cmd; + while (len) { + erase_addr = offset; + spi_flash_addr(erase_addr, cmd); + + SPI_DEBUG("SF: erase %2x %2x %2x %2x (%x)\n", cmd[0], cmd[1], + cmd[2], cmd[3], erase_addr); + + ret = spi_flash_write_common(flash, cmd, sizeof(cmd), NULL, 0); + if (ret < 0) { + ERROR("SF: erase failed\n"); + break; + } + + offset += erase_size; + len -= erase_size; + } + SPI_DEBUG("sf erase done\n"); + + spi_release_bus(); + return ret; +} + +int spi_flash_probe(struct spi_flash *flash) +{ + const struct spi_flash_info *info = NULL; + int ret; + + ret = spi_claim_bus(); + if (ret) { + ERROR("SF: Unable to claim SPI bus\n"); + ERROR("SF: probe failed\n"); + return ret; + } + + info = spi_flash_read_id(); + if (!info) + goto probe_fail; + + INFO("Flash Name: %s sectors %x, sec size %x\n", + info->name, info->n_sectors, + info->sector_size); + flash->size = info->n_sectors * info->sector_size; + flash->sector_size = info->sector_size; + flash->page_size = info->page_size; + flash->flags = info->flags; + + flash->read_cmd = CMD_READ_NORMAL; + flash->write_cmd = CMD_PAGE_PROGRAM; + flash->erase_cmd = CMD_ERASE_64K; + flash->erase_size = ERASE_SIZE_64K; + +probe_fail: + spi_release_bus(); + return ret; +} diff --git a/drivers/brcm/spi_sf.c b/drivers/brcm/spi_sf.c new file mode 100644 index 0000000..8bbb09f --- /dev/null +++ b/drivers/brcm/spi_sf.c @@ -0,0 +1,60 @@ +/* + * Copyright (c) 2019-2020, Broadcom + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include + +#include + +#define BITS_PER_BYTE 8 +#define CMD_LEN1 1 + +static int spi_flash_read_write(const uint8_t *cmd, + size_t cmd_len, + const uint8_t *data_out, + uint8_t *data_in, + size_t data_len) +{ + unsigned long flags = SPI_XFER_BEGIN; + int ret; + + if (data_len == 0) + flags |= SPI_XFER_END; + + ret = spi_xfer(cmd_len * BITS_PER_BYTE, cmd, NULL, flags); + if (ret) { + ERROR("SF: Failed to send command (%zu bytes): %d\n", + cmd_len, ret); + } else if (data_len != 0) { + ret = spi_xfer(data_len * BITS_PER_BYTE, data_out, + data_in, SPI_XFER_END); + if (ret) + ERROR("SF: Failed to transfer %zu bytes of data: %d\n", + data_len, ret); + } + + return ret; +} + +int spi_flash_cmd_read(const uint8_t *cmd, + size_t cmd_len, + void *data, + size_t data_len) +{ + return spi_flash_read_write(cmd, cmd_len, NULL, data, data_len); +} + +int spi_flash_cmd(uint8_t cmd, void *response, size_t len) +{ + return spi_flash_cmd_read(&cmd, CMD_LEN1, response, len); +} + +int spi_flash_cmd_write(const uint8_t *cmd, + size_t cmd_len, + const void *data, + size_t data_len) +{ + return spi_flash_read_write(cmd, cmd_len, data, NULL, data_len); +} -- cgit v1.2.3