From be58c81aff4cd4c0ccf43dbd7998da4a6a08c03b Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 21 Apr 2024 19:43:51 +0200 Subject: Adding upstream version 2.10.0+dfsg. Signed-off-by: Daniel Baumann --- drivers/renesas/common/avs/avs_driver.c | 630 ++++++++++++++++++++++++++++++++ drivers/renesas/common/avs/avs_driver.h | 20 + 2 files changed, 650 insertions(+) create mode 100644 drivers/renesas/common/avs/avs_driver.c create mode 100644 drivers/renesas/common/avs/avs_driver.h (limited to 'drivers/renesas/common/avs') diff --git a/drivers/renesas/common/avs/avs_driver.c b/drivers/renesas/common/avs/avs_driver.c new file mode 100644 index 0000000..2c939cd --- /dev/null +++ b/drivers/renesas/common/avs/avs_driver.c @@ -0,0 +1,630 @@ +/* + * Copyright (c) 2015-2020, Renesas Electronics Corporation. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include +#include +#include + +#include "avs_driver.h" +#include "cpg_registers.h" +#include "rcar_def.h" +#include "rcar_private.h" + +#if (AVS_SETTING_ENABLE == 1) +#if PMIC_ROHM_BD9571 +/* Read PMIC register for debug. 1:enable / 0:disable */ +#define AVS_READ_PMIC_REG_ENABLE 0 +/* The re-try number of times of the AVS setting. */ +#define AVS_RETRY_NUM (1U) +#endif /* PMIC_ROHM_BD9571 */ + +/* Base address of Adaptive Voltage Scaling module registers*/ +#define AVS_BASE (0xE60A0000U) +/* Adaptive Dynamic Voltage ADJust Parameter2 registers */ +#define ADVADJP2 (AVS_BASE + 0x013CU) + +/* Mask VOLCOND bit in ADVADJP2 registers */ +#define ADVADJP2_VOLCOND_MASK (0x000001FFU) /* VOLCOND[8:0] */ + +#if PMIC_ROHM_BD9571 +/* I2C for DVFS bit in CPG registers for module standby and software reset*/ +#define CPG_SYS_DVFS_BIT (0x04000000U) +#endif /* PMIC_ROHM_BD9571 */ +/* ADVFS Module bit in CPG registers for module standby and software reset*/ +#define CPG_SYS_ADVFS_BIT (0x02000000U) + +#if PMIC_ROHM_BD9571 +/* Base address of IICDVFS registers*/ +#define IIC_DVFS_BASE (0xE60B0000U) +/* IIC bus data register */ +#define IIC_ICDR (IIC_DVFS_BASE + 0x0000U) +/* IIC bus control register */ +#define IIC_ICCR (IIC_DVFS_BASE + 0x0004U) +/* IIC bus status register */ +#define IIC_ICSR (IIC_DVFS_BASE + 0x0008U) +/* IIC interrupt control register */ +#define IIC_ICIC (IIC_DVFS_BASE + 0x000CU) +/* IIC clock control register low */ +#define IIC_ICCL (IIC_DVFS_BASE + 0x0010U) +/* IIC clock control register high */ +#define IIC_ICCH (IIC_DVFS_BASE + 0x0014U) + +/* Bit in ICSR register */ +#define ICSR_BUSY (0x10U) +#define ICSR_AL (0x08U) +#define ICSR_TACK (0x04U) +#define ICSR_WAIT (0x02U) +#define ICSR_DTE (0x01U) + +/* Bit in ICIC register */ +#define ICIC_TACKE (0x04U) +#define ICIC_WAITE (0x02U) +#define ICIC_DTEE (0x01U) + +/* I2C bus interface enable */ +#define ICCR_ENABLE (0x80U) +/* Start condition */ +#define ICCR_START (0x94U) +/* Stop condition */ +#define ICCR_STOP (0x90U) +/* Restart condition with change to receive mode change */ +#define ICCR_START_RECV (0x81U) +/* Stop condition for receive mode */ +#define ICCR_STOP_RECV (0xC0U) + +/* Low-level period of SCL */ +#define ICCL_FREQ_8p33M (0x07U) /* for CP Phy 8.3333MHz */ +#define ICCL_FREQ_10M (0x09U) /* for CP Phy 10MHz */ +#define ICCL_FREQ_12p5M (0x0BU) /* for CP Phy 12.5MHz */ +#define ICCL_FREQ_16p66M (0x0EU) /* for CP Phy 16.6666MHz */ +/* High-level period of SCL */ +#define ICCH_FREQ_8p33M (0x01U) /* for CP Phy 8.3333MHz */ +#define ICCH_FREQ_10M (0x02U) /* for CP Phy 10MHz */ +#define ICCH_FREQ_12p5M (0x03U) /* for CP Phy 12.5MHz */ +#define ICCH_FREQ_16p66M (0x05U) /* for CP Phy 16.6666MHz */ + +/* PMIC */ +/* ROHM BD9571 slave address + (W) */ +#define PMIC_W_SLAVE_ADDRESS (0x60U) +/* ROHM BD9571 slave address + (R) */ +#define PMIC_R_SLAVE_ADDRESS (0x61U) +/* ROHM BD9571 DVFS SetVID register */ +#define PMIC_DVFS_SETVID (0x54U) +#endif /* PMIC_ROHM_BD9571 */ + +/* Individual information */ +#define EFUSE_AVS0 (0U) +#define EFUSE_AVS_NUM ARRAY_SIZE(init_vol_tbl) + +typedef struct { + uint32_t avs; /* AVS code */ + uint8_t vol; /* Voltage */ +} initial_voltage_t; + +static const initial_voltage_t init_vol_tbl[] = { + /* AVS code, ROHM BD9571 DVFS SetVID register */ + {0x00U, 0x53U}, /* AVS0, 0.83V */ + {0x01U, 0x52U}, /* AVS1, 0.82V */ + {0x02U, 0x51U}, /* AVS2, 0.81V */ + {0x04U, 0x50U}, /* AVS3, 0.80V */ + {0x08U, 0x4FU}, /* AVS4, 0.79V */ + {0x10U, 0x4EU}, /* AVS5, 0.78V */ + {0x20U, 0x4DU}, /* AVS6, 0.77V */ + {0x40U, 0x4CU} /* AVS7, 0.76V */ +}; + +#if PMIC_ROHM_BD9571 +/* Kind of AVS settings status */ +typedef enum { + avs_status_none = 0, + avs_status_init, + avs_status_start_condition, + avs_status_set_slave_addr, + avs_status_write_reg_addr, + avs_status_write_reg_data, + avs_status_stop_condition, + avs_status_end, + avs_status_complete, + avs_status_al_start, + avs_status_al_transfer, + avs_status_nack, + avs_status_error_stop, + ave_status_error_end +} avs_status_t; + +/* Kind of AVS error */ +typedef enum { + avs_error_none = 0, + avs_error_al, + avs_error_nack +} avs_error_t; + +static avs_status_t avs_status; +static uint32_t avs_retry; +#endif /* PMIC_ROHM_BD9571 */ +static uint32_t efuse_avs = EFUSE_AVS0; + +#if PMIC_ROHM_BD9571 +/* prototype */ +static avs_error_t avs_check_error(void); +static void avs_set_iic_clock(void); +#if AVS_READ_PMIC_REG_ENABLE == 1 +static uint8_t avs_read_pmic_reg(uint8_t addr); +static void avs_poll(uint8_t bit_pos, uint8_t val); +#endif +#endif /* PMIC_ROHM_BD9571 */ +#endif /* (AVS_SETTING_ENABLE==1) */ + +/* + * Initialize to enable the AVS setting. + */ +void rcar_avs_init(void) +{ +#if (AVS_SETTING_ENABLE == 1) + uint32_t val; + +#if PMIC_ROHM_BD9571 + /* Initialize AVS status */ + avs_status = avs_status_init; +#endif /* PMIC_ROHM_BD9571 */ + + /* Enable clock supply to ADVFS. */ + mstpcr_write(CPG_SMSTPCR9, CPG_MSTPSR9, CPG_SYS_ADVFS_BIT); + + /* Read AVS code (Initial values are derived from eFuse) */ + val = mmio_read_32(ADVADJP2) & ADVADJP2_VOLCOND_MASK; + + for (efuse_avs = 0U; efuse_avs < EFUSE_AVS_NUM; efuse_avs++) { + if (val == init_vol_tbl[efuse_avs].avs) + break; + } + + if (efuse_avs >= EFUSE_AVS_NUM) + efuse_avs = EFUSE_AVS0; /* Not applicable */ +#if PMIC_ROHM_BD9571 + /* Enable clock supply to DVFS. */ + mstpcr_write(CPG_SMSTPCR9, CPG_MSTPSR9, CPG_SYS_DVFS_BIT); + + /* Disable I2C module and All internal registers initialized. */ + mmio_write_8(IIC_ICCR, 0x00U); + while ((mmio_read_8(IIC_ICCR) & ICCR_ENABLE) != 0U) { + /* Disable I2C module and all internal registers initialized. */ + mmio_write_8(IIC_ICCR, 0x00U); + } + + /* Set next status */ + avs_status = avs_status_start_condition; + +#endif /* PMIC_ROHM_BD9571 */ +#endif /* (AVS_SETTING_ENABLE==1) */ +} + +/* + * Set the value of register corresponding to the voltage + * by transfer of I2C to PIMC. + */ +void rcar_avs_setting(void) +{ +#if (AVS_SETTING_ENABLE == 1) +#if PMIC_ROHM_BD9571 + avs_error_t err; + + switch (avs_status) { + case avs_status_start_condition: + /* Set ICCR.ICE=1 to activate the I2C module. */ + mmio_write_8(IIC_ICCR, mmio_read_8(IIC_ICCR) | ICCR_ENABLE); + /* Set frequency of 400kHz */ + avs_set_iic_clock(); + /* Set ICIC.TACKE=1, ICIC.WAITE=1, ICIC.DTEE=1 to */ + /* enable interrupt control. */ + mmio_write_8(IIC_ICIC, mmio_read_8(IIC_ICIC) + | ICIC_TACKE | ICIC_WAITE | ICIC_DTEE); + /* Write H'94 in ICCR to issue start condition */ + mmio_write_8(IIC_ICCR, ICCR_START); + /* Set next status */ + avs_status = avs_status_set_slave_addr; + break; + case avs_status_set_slave_addr: + /* Check error. */ + err = avs_check_error(); + if (err == avs_error_al) { + /* Recovery sequence of just after start. */ + avs_status = avs_status_al_start; + } else if (err == avs_error_nack) { + /* Recovery sequence of detected NACK */ + avs_status = avs_status_nack; + } else { + /* Was data transmission enabled ? */ + if ((mmio_read_8(IIC_ICSR) & ICSR_DTE) == ICSR_DTE) { + /* Clear ICIC.DTEE to disable a DTE interrupt */ + mmio_write_8(IIC_ICIC, mmio_read_8(IIC_ICIC) + & (uint8_t) (~ICIC_DTEE)); + /* Send PMIC slave address + (W) */ + mmio_write_8(IIC_ICDR, PMIC_W_SLAVE_ADDRESS); + /* Set next status */ + avs_status = avs_status_write_reg_addr; + } + } + break; + case avs_status_write_reg_addr: + /* Check error. */ + err = avs_check_error(); + if (err == avs_error_al) { + /* Recovery sequence of during data transfer. */ + avs_status = avs_status_al_transfer; + } else if (err == avs_error_nack) { + /* Recovery sequence of detected NACK */ + avs_status = avs_status_nack; + } else { + /* If wait state after data transmission. */ + if ((mmio_read_8(IIC_ICSR) & ICSR_WAIT) == ICSR_WAIT) { + /* Write PMIC DVFS_SetVID address */ + mmio_write_8(IIC_ICDR, PMIC_DVFS_SETVID); + /* Clear ICSR.WAIT to exit from wait state. */ + mmio_write_8(IIC_ICSR, mmio_read_8(IIC_ICSR) + & (uint8_t) (~ICSR_WAIT)); + /* Set next status */ + avs_status = avs_status_write_reg_data; + } + } + break; + case avs_status_write_reg_data: + /* Check error. */ + err = avs_check_error(); + if (err == avs_error_al) { + /* Recovery sequence of during data transfer. */ + avs_status = avs_status_al_transfer; + } else if (err == avs_error_nack) { + /* Recovery sequence of detected NACK */ + avs_status = avs_status_nack; + } else { + /* If wait state after data transmission. */ + if ((mmio_read_8(IIC_ICSR) & ICSR_WAIT) == ICSR_WAIT) { + /* Dose efuse_avs exceed the number of */ + /* the tables? */ + if (efuse_avs >= EFUSE_AVS_NUM) { + ERROR("%s%s=%u\n", "AVS number of ", + "eFuse is out of range. number", + efuse_avs); + /* Infinite loop */ + panic(); + } + /* Write PMIC DVFS_SetVID value */ + mmio_write_8(IIC_ICDR, + init_vol_tbl[efuse_avs].vol); + /* Clear ICSR.WAIT to exit from wait state. */ + mmio_write_8(IIC_ICSR, mmio_read_8(IIC_ICSR) + & (uint8_t) (~ICSR_WAIT)); + /* Set next status */ + avs_status = avs_status_stop_condition; + } + } + break; + case avs_status_stop_condition: + err = avs_check_error(); + if (err == avs_error_al) { + /* Recovery sequence of during data transfer. */ + avs_status = avs_status_al_transfer; + } else if (err == avs_error_nack) { + /* Recovery sequence of detected NACK */ + avs_status = avs_status_nack; + } else { + /* If wait state after data transmission. */ + if ((mmio_read_8(IIC_ICSR) & ICSR_WAIT) == ICSR_WAIT) { + /* Write H'90 in ICCR to issue stop condition */ + mmio_write_8(IIC_ICCR, ICCR_STOP); + /* Clear ICSR.WAIT to exit from wait state. */ + mmio_write_8(IIC_ICSR, mmio_read_8(IIC_ICSR) + & (uint8_t) (~ICSR_WAIT)); + /* Set next status */ + avs_status = avs_status_end; + } + } + break; + case avs_status_end: + /* Is this module not busy?. */ + if ((mmio_read_8(IIC_ICSR) & ICSR_BUSY) == 0U) { + /* Set ICCR=H'00 to disable the I2C module. */ + mmio_write_8(IIC_ICCR, 0x00U); + /* Set next status */ + avs_status = avs_status_complete; + } + break; + case avs_status_al_start: + /* Clear ICSR.AL bit */ + mmio_write_8(IIC_ICSR, (mmio_read_8(IIC_ICSR) + & (uint8_t) (~ICSR_AL))); + /* Transmit a clock pulse */ + mmio_write_8(IIC_ICDR, init_vol_tbl[EFUSE_AVS0].vol); + /* Set next status */ + avs_status = avs_status_error_stop; + break; + case avs_status_al_transfer: + /* Clear ICSR.AL bit */ + mmio_write_8(IIC_ICSR, (mmio_read_8(IIC_ICSR) + & (uint8_t) (~ICSR_AL))); + /* Set next status */ + avs_status = avs_status_error_stop; + break; + case avs_status_nack: + /* Write H'90 in ICCR to issue stop condition */ + mmio_write_8(IIC_ICCR, ICCR_STOP); + /* Disable a WAIT and DTEE interrupt. */ + mmio_write_8(IIC_ICIC, mmio_read_8(IIC_ICIC) + & (uint8_t) (~(ICIC_WAITE | ICIC_DTEE))); + /* Clear ICSR.TACK bit */ + mmio_write_8(IIC_ICSR, mmio_read_8(IIC_ICSR) + & (uint8_t) (~ICSR_TACK)); + /* Set next status */ + avs_status = ave_status_error_end; + break; + case avs_status_error_stop: + /* If wait state after data transmission. */ + if ((mmio_read_8(IIC_ICSR) & ICSR_WAIT) == ICSR_WAIT) { + /* Write H'90 in ICCR to issue stop condition */ + mmio_write_8(IIC_ICCR, ICCR_STOP); + /* Clear ICSR.WAIT to exit from wait state. */ + mmio_write_8(IIC_ICSR, mmio_read_8(IIC_ICSR) + & (uint8_t) (~ICSR_WAIT)); + /* Set next status */ + avs_status = ave_status_error_end; + } + break; + case ave_status_error_end: + /* Is this module not busy?. */ + if ((mmio_read_8(IIC_ICSR) & ICSR_BUSY) == 0U) { + /* Set ICCR=H'00 to disable the I2C module. */ + mmio_write_8(IIC_ICCR, 0x00U); + /* Increment the re-try number of times. */ + avs_retry++; + /* Set start a re-try to status. */ + avs_status = avs_status_start_condition; + } + break; + case avs_status_complete: + /* After "avs_status" became the "avs_status_complete", */ + /* "avs_setting()" function may be called. */ + break; + default: + /* This case is not possible. */ + ERROR("AVS setting is in invalid status. status=%u\n", + avs_status); + /* Infinite loop */ + panic(); + break; + } +#endif /* PMIC_ROHM_BD9571 */ +#endif /* (AVS_SETTING_ENABLE==1) */ +} + +/* + * Finish the AVS setting. + */ +void rcar_avs_end(void) +{ +#if (AVS_SETTING_ENABLE == 1) + uint32_t mstp; + +#if PMIC_ROHM_BD9571 + /* While status is not completion, be repeated. */ + while (avs_status != avs_status_complete) + rcar_avs_setting(); + + NOTICE("AVS setting succeeded. DVFS_SetVID=0x%x\n", + init_vol_tbl[efuse_avs].vol); + +#if AVS_READ_PMIC_REG_ENABLE == 1 + { + uint8_t addr = PMIC_DVFS_SETVID; + uint8_t value = avs_read_pmic_reg(addr); + + NOTICE("Read PMIC register. address=0x%x value=0x%x\n", + addr, value); + } +#endif + + /* Bit of the module which wants to disable clock supply. */ + mstp = CPG_SYS_DVFS_BIT; + /* Disables the supply of clock signal to a module. */ + cpg_write(CPG_SMSTPCR9, mmio_read_32(CPG_SMSTPCR9) | mstp); +#endif /* PMIC_ROHM_BD9571 */ + + /* Bit of the module which wants to disable clock supply. */ + mstp = CPG_SYS_ADVFS_BIT; + /* Disables the supply of clock signal to a module. */ + cpg_write(CPG_SMSTPCR9, mmio_read_32(CPG_SMSTPCR9) | mstp); + +#endif /* (AVS_SETTING_ENABLE==1) */ +} + +#if (AVS_SETTING_ENABLE == 1) +#if PMIC_ROHM_BD9571 +/* + * Check error and judge re-try. + */ +static avs_error_t avs_check_error(void) +{ + avs_error_t ret; + + if ((mmio_read_8(IIC_ICSR) & ICSR_AL) == ICSR_AL) { + NOTICE("%s AVS status=%d Retry=%u\n", + "Loss of arbitration is detected.", avs_status, avs_retry); + /* Check of retry number of times */ + if (avs_retry >= AVS_RETRY_NUM) { + ERROR("AVS setting failed in retry. max=%u\n", + AVS_RETRY_NUM); + /* Infinite loop */ + panic(); + } + /* Set the error detected to error status. */ + ret = avs_error_al; + } else if ((mmio_read_8(IIC_ICSR) & ICSR_TACK) == ICSR_TACK) { + NOTICE("%s AVS status=%d Retry=%u\n", + "Non-acknowledge is detected.", avs_status, avs_retry); + /* Check of retry number of times */ + if (avs_retry >= AVS_RETRY_NUM) { + ERROR("AVS setting failed in retry. max=%u\n", + AVS_RETRY_NUM); + /* Infinite loop */ + panic(); + } + /* Set the error detected to error status. */ + ret = avs_error_nack; + } else { + /* Not error. */ + ret = avs_error_none; + } + return ret; +} + +/* + * Set I2C for DVFS clock. + */ +static void avs_set_iic_clock(void) +{ + uint32_t md_pin; + + /* Read Mode pin register. */ + md_pin = mmio_read_32(RCAR_MODEMR) & CHECK_MD13_MD14; + /* Set the module clock (CP phy) for the IIC-DVFS. */ + /* CP phy is EXTAL / 2. */ + switch (md_pin) { + case MD14_MD13_TYPE_0: /* EXTAL = 16.6666MHz */ + mmio_write_8(IIC_ICCL, ICCL_FREQ_8p33M); + mmio_write_8(IIC_ICCH, ICCH_FREQ_8p33M); + break; + case MD14_MD13_TYPE_1: /* EXTAL = 20MHz */ + mmio_write_8(IIC_ICCL, ICCL_FREQ_10M); + mmio_write_8(IIC_ICCH, ICCH_FREQ_10M); + break; + case MD14_MD13_TYPE_2: /* EXTAL = 25MHz (H3/M3) */ + mmio_write_8(IIC_ICCL, ICCL_FREQ_12p5M); + mmio_write_8(IIC_ICCH, ICCH_FREQ_12p5M); + break; + case MD14_MD13_TYPE_3: /* EXTAL = 33.3333MHz */ + mmio_write_8(IIC_ICCL, ICCL_FREQ_16p66M); + mmio_write_8(IIC_ICCH, ICCH_FREQ_16p66M); + break; + default: /* This case is not possible. */ + /* CP Phy frequency is to be set for the 16.66MHz */ + mmio_write_8(IIC_ICCL, ICCL_FREQ_16p66M); + mmio_write_8(IIC_ICCH, ICCH_FREQ_16p66M); + break; + } +} + +#if AVS_READ_PMIC_REG_ENABLE == 1 +/* + * Read the value of the register of PMIC. + */ +static uint8_t avs_read_pmic_reg(uint8_t addr) +{ + uint8_t reg; + + /* Set ICCR.ICE=1 to activate the I2C module. */ + mmio_write_8(IIC_ICCR, mmio_read_8(IIC_ICCR) | ICCR_ENABLE); + + /* Set frequency of 400kHz */ + avs_set_iic_clock(); + + /* + * Set ICIC.WAITE=1, ICIC.DTEE=1 to enable data transmission + * interrupt and wait interrupt. + */ + mmio_write_8(IIC_ICIC, mmio_read_8(IIC_ICIC) | ICIC_WAITE | ICIC_DTEE); + + /* Write H'94 in ICCR to issue start condition */ + mmio_write_8(IIC_ICCR, ICCR_START); + + /* Wait for a until ICSR.DTE becomes 1. */ + avs_poll(ICSR_DTE, 1U); + + /* Clear ICIC.DTEE to disable a DTE interrupt. */ + mmio_write_8(IIC_ICIC, mmio_read_8(IIC_ICIC) & (uint8_t) (~ICIC_DTEE)); + /* Send slave address of PMIC */ + mmio_write_8(IIC_ICDR, PMIC_W_SLAVE_ADDRESS); + + /* Wait for a until ICSR.WAIT becomes 1. */ + avs_poll(ICSR_WAIT, 1U); + + /* write PMIC address */ + mmio_write_8(IIC_ICDR, addr); + /* Clear ICSR.WAIT to exit from WAIT status. */ + mmio_write_8(IIC_ICSR, mmio_read_8(IIC_ICSR) & (uint8_t) (~ICSR_WAIT)); + + /* Wait for a until ICSR.WAIT becomes 1. */ + avs_poll(ICSR_WAIT, 1U); + + /* Write H'94 in ICCR to issue restart condition */ + mmio_write_8(IIC_ICCR, ICCR_START); + /* Clear ICSR.WAIT to exit from WAIT status. */ + mmio_write_8(IIC_ICSR, mmio_read_8(IIC_ICSR) & (uint8_t) (~ICSR_WAIT)); + /* Set ICIC.DTEE=1 to enable data transmission interrupt. */ + mmio_write_8(IIC_ICIC, mmio_read_8(IIC_ICIC) | ICIC_DTEE); + + /* Wait for a until ICSR.DTE becomes 1. */ + avs_poll(ICSR_DTE, 1U); + + /* Clear ICIC.DTEE to disable a DTE interrupt. */ + mmio_write_8(IIC_ICIC, mmio_read_8(IIC_ICIC) & (uint8_t) (~ICIC_DTEE)); + /* Send slave address of PMIC */ + mmio_write_8(IIC_ICDR, PMIC_R_SLAVE_ADDRESS); + + /* Wait for a until ICSR.WAIT becomes 1. */ + avs_poll(ICSR_WAIT, 1U); + + /* Write H'81 to ICCR to issue the repeated START condition */ + /* for changing the transmission mode to the receive mode. */ + mmio_write_8(IIC_ICCR, ICCR_START_RECV); + /* Clear ICSR.WAIT to exit from WAIT status. */ + mmio_write_8(IIC_ICSR, mmio_read_8(IIC_ICSR) & (uint8_t) (~ICSR_WAIT)); + + /* Wait for a until ICSR.WAIT becomes 1. */ + avs_poll(ICSR_WAIT, 1U); + + /* Set ICCR to H'C0 for the STOP condition */ + mmio_write_8(IIC_ICCR, ICCR_STOP_RECV); + /* Clear ICSR.WAIT to exit from WAIT status. */ + mmio_write_8(IIC_ICSR, mmio_read_8(IIC_ICSR) & (uint8_t) (~ICSR_WAIT)); + /* Set ICIC.DTEE=1 to enable data transmission interrupt. */ + mmio_write_8(IIC_ICIC, mmio_read_8(IIC_ICIC) | ICIC_DTEE); + + /* Wait for a until ICSR.DTE becomes 1. */ + avs_poll(ICSR_DTE, 1U); + + /* Receive DVFS SetVID register */ + /* Clear ICIC.DTEE to disable a DTE interrupt. */ + mmio_write_8(IIC_ICIC, mmio_read_8(IIC_ICIC) & (uint8_t) (~ICIC_DTEE)); + /* Receive DVFS SetVID register */ + reg = mmio_read_8(IIC_ICDR); + + /* Wait until ICSR.BUSY is cleared. */ + avs_poll(ICSR_BUSY, 0U); + + /* Set ICCR=H'00 to disable the I2C module. */ + mmio_write_8(IIC_ICCR, 0x00U); + + return reg; +} + +/* + * Wait processing by the polling. + */ +static void avs_poll(uint8_t bit_pos, uint8_t val) +{ + uint8_t bit_val = 0U; + + if (val != 0U) + bit_val = bit_pos; + + while (1) { + if ((mmio_read_8(IIC_ICSR) & bit_pos) == bit_val) + break; + } +} +#endif /* AVS_READ_PMIC_REG_ENABLE */ +#endif /* PMIC_ROHM_BD9571 */ +#endif /* (AVS_SETTING_ENABLE==1) */ diff --git a/drivers/renesas/common/avs/avs_driver.h b/drivers/renesas/common/avs/avs_driver.h new file mode 100644 index 0000000..aa773b6 --- /dev/null +++ b/drivers/renesas/common/avs/avs_driver.h @@ -0,0 +1,20 @@ +/* + * Copyright (c) 2015-2017, Renesas Electronics Corporation. All rights + * reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef AVS_DRIVER_H +#define AVS_DRIVER_H + +/* AVS Setting. 1:enable / 0:disable */ +#ifndef AVS_SETTING_ENABLE +#define AVS_SETTING_ENABLE 1 +#endif /* AVS_SETTING_ENABLE */ + +void rcar_avs_init(void); +void rcar_avs_setting(void); +void rcar_avs_end(void); + +#endif /* AVS_DRIVER_H */ -- cgit v1.2.3