From be58c81aff4cd4c0ccf43dbd7998da4a6a08c03b Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 21 Apr 2024 19:43:51 +0200 Subject: Adding upstream version 2.10.0+dfsg. Signed-off-by: Daniel Baumann --- plat/brcm/board/stingray/src/tz_sec.c | 153 ++++++++++++++++++++++++++++++++++ 1 file changed, 153 insertions(+) create mode 100644 plat/brcm/board/stingray/src/tz_sec.c (limited to 'plat/brcm/board/stingray/src/tz_sec.c') diff --git a/plat/brcm/board/stingray/src/tz_sec.c b/plat/brcm/board/stingray/src/tz_sec.c new file mode 100644 index 0000000..07b12a7 --- /dev/null +++ b/plat/brcm/board/stingray/src/tz_sec.c @@ -0,0 +1,153 @@ +/* + * Copyright (c) 2016 - 2020, Broadcom + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include +#include +#include + +#include +#include + +/* + * Trust Zone controllers + */ +#define TZC400_FS_SRAM_ROOT 0x66d84000 + +/* + * TZPC Master configure registers + */ + +/* TZPC_TZPCDECPROT0set */ +#define TZPC0_MASTER_NS_BASE 0x68b40804 +#define TZPC0_SATA3_BIT 5 +#define TZPC0_SATA2_BIT 4 +#define TZPC0_SATA1_BIT 3 +#define TZPC0_SATA0_BIT 2 +#define TZPC0_USB3H1_BIT 1 +#define TZPC0_USB3H0_BIT 0 +#define TZPC0_MASTER_SEC_DEFAULT 0 + +/* TZPC_TZPCDECPROT1set */ +#define TZPC1_MASTER_NS_BASE 0x68b40810 +#define TZPC1_SDIO1_BIT 6 +#define TZPC1_SDIO0_BIT 5 +#define TZPC1_AUDIO0_BIT 4 +#define TZPC1_USB2D_BIT 3 +#define TZPC1_USB2H1_BIT 2 +#define TZPC1_USB2H0_BIT 1 +#define TZPC1_AMAC0_BIT 0 +#define TZPC1_MASTER_SEC_DEFAULT 0 + + +struct tz_sec_desc { + uintptr_t addr; + uint32_t val; +}; + +static const struct tz_sec_desc tz_master_defaults[] = { +{ TZPC0_MASTER_NS_BASE, TZPC0_MASTER_SEC_DEFAULT }, +{ TZPC1_MASTER_NS_BASE, TZPC1_MASTER_SEC_DEFAULT } +}; + +/* + * Initialize the TrustZone Controller for SRAM partitioning. + */ +static void bcm_tzc_setup(void) +{ + VERBOSE("Configuring SRAM TrustZone Controller\n"); + + /* Init the TZASC controller */ + tzc400_init(TZC400_FS_SRAM_ROOT); + + /* + * Close the entire SRAM space + * Region 0 covers the entire SRAM space + * None of the NS device can access it. + */ + tzc400_configure_region0(TZC_REGION_S_RDWR, 0); + + /* Do raise an exception if a NS device tries to access secure memory */ + tzc400_set_action(TZC_ACTION_ERR); +} + +/* + * Configure TZ Master as NS_MASTER or SECURE_MASTER + * To set a Master to non-secure, use *_SET registers + * To set a Master to secure, use *_CLR registers (set + 0x4 address) + */ +static void tz_master_set(uint32_t base, uint32_t value, uint32_t ns) +{ + if (ns == SECURE_MASTER) { + mmio_write_32(base + 4, value); + } else { + mmio_write_32(base, value); + } +} + +/* + * Initialize the secure environment for sdio. + */ +void plat_tz_sdio_ns_master_set(uint32_t ns) +{ + tz_master_set(TZPC1_MASTER_NS_BASE, + 1 << TZPC1_SDIO0_BIT, + ns); +} + +/* + * Initialize the secure environment for usb. + */ +void plat_tz_usb_ns_master_set(uint32_t ns) +{ + tz_master_set(TZPC1_MASTER_NS_BASE, + 1 << TZPC1_USB2H0_BIT, + ns); +} + +/* + * Set masters to default configuration. + * + * DMA security settings are programmed into the PL-330 controller and + * are not set by iProc TZPC registers. + * DMA always comes up as secure master (*NS bit is 0). + * + * Because the default reset values of TZPC are 0 (== Secure), + * ARM Verilog code makes all masters, including PCIe, come up as + * secure. + * However, SOTP has a bit called SOTP_ALLMASTER_NS that overrides + * TZPC and makes all masters non-secure for AB devices. + * + * Hence we first set all the TZPC bits to program all masters, + * including PCIe, as non-secure, then set the CLEAR_ALLMASTER_NS bit + * so that the SOTP_ALLMASTER_NS cannot override TZPC. + * now security settings for each masters come from TZPC + * (which makes all masters other than DMA as non-secure). + * + * During the boot, all masters other than DMA Ctrlr + list + * are non-secure in an AB Prod/AB Dev/AB Pending device. + * + */ +void plat_tz_master_default_cfg(void) +{ + int i; + + /* Configure default secure and non-secure TZ Masters */ + for (i = 0; i < ARRAY_SIZE(tz_master_defaults); i++) { + tz_master_set(tz_master_defaults[i].addr, + tz_master_defaults[i].val, + SECURE_MASTER); + tz_master_set(tz_master_defaults[i].addr, + ~tz_master_defaults[i].val, + NS_MASTER); + } + + /* Clear all master NS */ + mmio_setbits_32(SOTP_CHIP_CTRL, + 1 << SOTP_CLEAR_SYSCTRL_ALL_MASTER_NS); + + /* Initialize TZ controller and Set SRAM to secure */ + bcm_tzc_setup(); +} -- cgit v1.2.3