From be58c81aff4cd4c0ccf43dbd7998da4a6a08c03b Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 21 Apr 2024 19:43:51 +0200 Subject: Adding upstream version 2.10.0+dfsg. Signed-off-by: Daniel Baumann --- plat/mediatek/drivers/uart/8250_console.S | 163 ++++++++++++++++++++++++++++++ plat/mediatek/drivers/uart/uart.c | 112 ++++++++++++++++++++ plat/mediatek/drivers/uart/uart.h | 100 ++++++++++++++++++ plat/mediatek/drivers/uart/uart8250.h | 38 +++++++ 4 files changed, 413 insertions(+) create mode 100644 plat/mediatek/drivers/uart/8250_console.S create mode 100644 plat/mediatek/drivers/uart/uart.c create mode 100644 plat/mediatek/drivers/uart/uart.h create mode 100644 plat/mediatek/drivers/uart/uart8250.h (limited to 'plat/mediatek/drivers/uart') diff --git a/plat/mediatek/drivers/uart/8250_console.S b/plat/mediatek/drivers/uart/8250_console.S new file mode 100644 index 0000000..66f998d --- /dev/null +++ b/plat/mediatek/drivers/uart/8250_console.S @@ -0,0 +1,163 @@ +/* + * Copyright (c) 2015-2022, ARM Limited and Contributors. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +#include +#include + + .globl console_core_init + .globl console_core_putc + .globl console_core_getc + .globl console_core_flush + + /* ----------------------------------------------- + * int console_core_init(unsigned long base_addr, + * unsigned int uart_clk, unsigned int baud_rate) + * Function to initialize the console without a + * C Runtime to print debug information. This + * function will be accessed by console_init and + * crash reporting. + * In: x0 - console base address + * w1 - Uart clock in Hz + * w2 - Baud rate + * Out: return 1 on success else 0 on error + * Clobber list : x1, x2, x3 + * ----------------------------------------------- + */ +func console_core_init + /* Check the input base address */ + cbz x0, core_init_fail + /* Check baud rate and uart clock for sanity */ + cbz w1, core_init_fail + cbz w2, core_init_fail + + /* Disable interrupt */ + str wzr, [x0, #UART_IER] + + /* Force DTR and RTS to high */ + mov w3, #(UART_MCR_DTR | UART_MCR_RTS) + str w3, [x0, #UART_MCR] + + /* Check high speed */ + movz w3, #:abs_g1:115200 + movk w3, #:abs_g0_nc:115200 + cmp w2, w3 + b.hi 1f + + /* Non high speed */ + lsl w2, w2, #4 + mov w3, wzr + b 2f + + /* High speed */ +1: lsl w2, w2, #2 + mov w3, #2 + + /* Set high speed UART register */ +2: str w3, [x0, #UART_HIGHSPEED] + + /* Calculate divisor */ + udiv w3, w1, w2 /* divisor = uartclk / (quot * baudrate) */ + msub w1, w3, w2, w1 /* remainder = uartclk % (quot * baudrate) */ + lsr w2, w2, #1 + cmp w1, w2 + cinc w3, w3, hs + + /* Set line configuration, access divisor latches */ + mov w1, #(UART_LCR_DLAB | UART_LCR_WLS_8) + str w1, [x0, #UART_LCR] + + /* Set the divisor */ + and w1, w3, #0xff + str w1, [x0, #UART_DLL] + lsr w1, w3, #8 + and w1, w1, #0xff + str w1, [x0, #UART_DLH] + + /* Hide the divisor latches */ + mov w1, #UART_LCR_WLS_8 + str w1, [x0, #UART_LCR] + + /* Enable FIFOs, and clear receive and transmit */ + mov w1, #(UART_FCR_FIFO_EN | UART_FCR_CLEAR_RCVR | \ + UART_FCR_CLEAR_XMIT) + str w1, [x0, #UART_FCR] + + mov w0, #1 + ret +core_init_fail: + mov w0, wzr + ret +endfunc console_core_init + + /* -------------------------------------------------------- + * int console_core_putc(int c, unsigned long base_addr) + * Function to output a character over the console. It + * returns the character printed on success or -1 on error. + * In : w0 - character to be printed + * x1 - console base address + * Out : return -1 on error else return character. + * Clobber list : x2 + * -------------------------------------------------------- + */ +func console_core_putc + /* Check the input parameter */ + cbz x1, putc_error + /* Prepend '\r' to '\n' */ + cmp w0, #0xA + b.ne 2f + + /* Check if the transmit FIFO is full */ +1: ldr w2, [x1, #UART_LSR] + and w2, w2, #UART_LSR_THRE + cbz w2, 1b + mov w2, #0xD + str w2, [x1, #UART_THR] + + /* Check if the transmit FIFO is full */ +2: ldr w2, [x1, #UART_LSR] + and w2, w2, #UART_LSR_THRE + cbz w2, 2b + str w0, [x1, #UART_THR] + ret +putc_error: + mov w0, #-1 + ret +endfunc console_core_putc + + /* --------------------------------------------- + * int console_core_getc(unsigned long base_addr) + * Function to get a character from the console. + * It returns the character grabbed on success + * or -1 on error. + * In : x0 - console base address + * Clobber list : x0, x1 + * --------------------------------------------- + */ +func console_core_getc + cbz x0, getc_error + + /* Check if the receive FIFO is empty */ +1: ldr w1, [x0, #UART_LSR] + tbz w1, #UART_LSR_DR, 1b + ldr w0, [x0, #UART_RBR] + ret +getc_error: + mov w0, #-1 + ret +endfunc console_core_getc + + /* --------------------------------------------- + * void console_core_flush(uintptr_t base_addr) + * Function to force a write of all buffered + * data that hasn't been output. + * In : x0 - console base address + * Out : void. + * Clobber list : x0, x1 + * --------------------------------------------- + */ +func console_core_flush + /* Placeholder */ + ret +endfunc console_core_flush diff --git a/plat/mediatek/drivers/uart/uart.c b/plat/mediatek/drivers/uart/uart.c new file mode 100644 index 0000000..fdaa793 --- /dev/null +++ b/plat/mediatek/drivers/uart/uart.c @@ -0,0 +1,112 @@ +/* + * Copyright (c) 2020-2022, MediaTek Inc. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include +#include + +static struct mt_uart uart_save_addr[DRV_SUPPORT_UART_PORTS]; + +static const uint32_t uart_base_addr[DRV_SUPPORT_UART_PORTS] = { + UART0_BASE, + UART1_BASE +}; + +void mt_uart_restore(void) +{ + int uart_idx = UART_PORT0; + struct mt_uart *uart; + unsigned long base; + + /* Must NOT print any debug log before UART restore */ + for (uart_idx = UART_PORT0; uart_idx < HW_SUPPORT_UART_PORTS; + uart_idx++) { + + uart = &uart_save_addr[uart_idx]; + base = uart->base; + + mmio_write_32(UART_LCR(base), UART_LCR_MODE_B); + mmio_write_32(UART_EFR(base), uart->registers.efr); + mmio_write_32(UART_LCR(base), uart->registers.lcr); + mmio_write_32(UART_FCR(base), uart->registers.fcr); + + /* baudrate */ + mmio_write_32(UART_HIGHSPEED(base), uart->registers.highspeed); + mmio_write_32(UART_FRACDIV_L(base), uart->registers.fracdiv_l); + mmio_write_32(UART_FRACDIV_M(base), uart->registers.fracdiv_m); + mmio_write_32(UART_LCR(base), + uart->registers.lcr | UART_LCR_DLAB); + mmio_write_32(UART_DLL(base), uart->registers.dll); + mmio_write_32(UART_DLH(base), uart->registers.dlh); + mmio_write_32(UART_LCR(base), uart->registers.lcr); + mmio_write_32(UART_SAMPLE_COUNT(base), + uart->registers.sample_count); + mmio_write_32(UART_SAMPLE_POINT(base), + uart->registers.sample_point); + mmio_write_32(UART_GUARD(base), uart->registers.guard); + + /* flow control */ + mmio_write_32(UART_ESCAPE_EN(base), uart->registers.escape_en); + mmio_write_32(UART_MCR(base), uart->registers.mcr); + mmio_write_32(UART_IER(base), uart->registers.ier); + mmio_write_32(UART_SCR(base), uart->registers.scr); + } +} + +void mt_uart_save(void) +{ + int uart_idx = UART_PORT0; + struct mt_uart *uart; + unsigned long base; + + for (uart_idx = UART_PORT0; uart_idx < HW_SUPPORT_UART_PORTS; + uart_idx++) { + + uart_save_addr[uart_idx].base = uart_base_addr[uart_idx]; + base = uart_base_addr[uart_idx]; + uart = &uart_save_addr[uart_idx]; + uart->registers.lcr = mmio_read_32(UART_LCR(base)); + + mmio_write_32(UART_LCR(base), UART_LCR_MODE_B); + uart->registers.efr = mmio_read_32(UART_EFR(base)); + mmio_write_32(UART_LCR(base), uart->registers.lcr); + uart->registers.fcr = mmio_read_32(UART_FCR_RD(base)); + + /* baudrate */ + uart->registers.highspeed = mmio_read_32(UART_HIGHSPEED(base)); + uart->registers.fracdiv_l = mmio_read_32(UART_FRACDIV_L(base)); + uart->registers.fracdiv_m = mmio_read_32(UART_FRACDIV_M(base)); + mmio_write_32(UART_LCR(base), + uart->registers.lcr | UART_LCR_DLAB); + uart->registers.dll = mmio_read_32(UART_DLL(base)); + uart->registers.dlh = mmio_read_32(UART_DLH(base)); + mmio_write_32(UART_LCR(base), uart->registers.lcr); + uart->registers.sample_count = mmio_read_32( + UART_SAMPLE_COUNT(base)); + uart->registers.sample_point = mmio_read_32( + UART_SAMPLE_POINT(base)); + uart->registers.guard = mmio_read_32(UART_GUARD(base)); + + /* flow control */ + uart->registers.escape_en = mmio_read_32(UART_ESCAPE_EN(base)); + uart->registers.mcr = mmio_read_32(UART_MCR(base)); + uart->registers.ier = mmio_read_32(UART_IER(base)); + uart->registers.scr = mmio_read_32(UART_SCR(base)); + } +} + +void mt_console_uart_cg(int on) +{ + if (on == 1) { + mmio_write_32(UART_CLOCK_GATE_CLR, UART0_CLOCK_GATE_BIT); + } else { + mmio_write_32(UART_CLOCK_GATE_SET, UART0_CLOCK_GATE_BIT); + } +} + +uint32_t mt_console_uart_cg_status(void) +{ + return mmio_read_32(UART_CLOCK_GATE_STA) & UART0_CLOCK_GATE_BIT; +} diff --git a/plat/mediatek/drivers/uart/uart.h b/plat/mediatek/drivers/uart/uart.h new file mode 100644 index 0000000..2ca74fa --- /dev/null +++ b/plat/mediatek/drivers/uart/uart.h @@ -0,0 +1,100 @@ +/* + * Copyright (c) 2020-2022, MediaTek Inc. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef UART_H +#define UART_H + +#include + +/* UART HW information */ +#define HW_SUPPORT_UART_PORTS 2 +#define DRV_SUPPORT_UART_PORTS 2 + +/* console UART clock cg */ +#define UART_CLOCK_GATE_SET (INFRACFG_AO_BASE + 0x80) +#define UART_CLOCK_GATE_CLR (INFRACFG_AO_BASE + 0x84) +#define UART_CLOCK_GATE_STA (INFRACFG_AO_BASE + 0x90) +#define UART0_CLOCK_GATE_BIT (1U<<22) +#define UART1_CLOCK_GATE_BIT (1U<<23) + +/* UART registers */ +#define UART_RBR(_baseaddr) (_baseaddr + 0x0) +#define UART_THR(_baseaddr) (_baseaddr + 0x0) +#define UART_IER(_baseaddr) (_baseaddr + 0x4) +#define UART_IIR(_baseaddr) (_baseaddr + 0x8) +#define UART_FCR(_baseaddr) (_baseaddr + 0x8) +#define UART_LCR(_baseaddr) (_baseaddr + 0xc) +#define UART_MCR(_baseaddr) (_baseaddr + 0x10) +#define UART_LSR(_baseaddr) (_baseaddr + 0x14) +#define UART_MSR(_baseaddr) (_baseaddr + 0x18) +#define UART_SCR(_baseaddr) (_baseaddr + 0x1c) +#define UART_DLL(_baseaddr) (_baseaddr + 0x0) +#define UART_DLH(_baseaddr) (_baseaddr + 0x4) +#define UART_EFR(_baseaddr) (_baseaddr + 0x8) +#define UART_XON1(_baseaddr) (_baseaddr + 0x10) +#define UART_XON2(_baseaddr) (_baseaddr + 0x14) +#define UART_XOFF1(_baseaddr) (_baseaddr + 0x18) +#define UART_XOFF2(_baseaddr) (_baseaddr + 0x1c) +#define UART_AUTOBAUD(_baseaddr) (_baseaddr + 0x20) +#define UART_HIGHSPEED(_baseaddr) (_baseaddr + 0x24) +#define UART_SAMPLE_COUNT(_baseaddr) (_baseaddr + 0x28) +#define UART_SAMPLE_POINT(_baseaddr) (_baseaddr + 0x2c) +#define UART_AUTOBAUD_REG(_baseaddr) (_baseaddr + 0x30) +#define UART_RATE_FIX_REG(_baseaddr) (_baseaddr + 0x34) +#define UART_AUTO_BAUDSAMPLE(_baseaddr) (_baseaddr + 0x38) +#define UART_GUARD(_baseaddr) (_baseaddr + 0x3c) +#define UART_ESCAPE_DAT(_baseaddr) (_baseaddr + 0x40) +#define UART_ESCAPE_EN(_baseaddr) (_baseaddr + 0x44) +#define UART_SLEEP_EN(_baseaddr) (_baseaddr + 0x48) +#define UART_DMA_EN(_baseaddr) (_baseaddr + 0x4c) +#define UART_RXTRI_AD(_baseaddr) (_baseaddr + 0x50) +#define UART_FRACDIV_L(_baseaddr) (_baseaddr + 0x54) +#define UART_FRACDIV_M(_baseaddr) (_baseaddr + 0x58) +#define UART_FCR_RD(_baseaddr) (_baseaddr + 0x5C) +#define UART_USB_RX_SEL(_baseaddr) (_baseaddr + 0xB0) +#define UART_SLEEP_REQ(_baseaddr) (_baseaddr + 0xB4) +#define UART_SLEEP_ACK(_baseaddr) (_baseaddr + 0xB8) +#define UART_SPM_SEL(_baseaddr) (_baseaddr + 0xBC) +#define UART_LCR_DLAB 0x0080 +#define UART_LCR_MODE_B 0x00bf + +enum uart_port_ID { + UART_PORT0 = 0, + UART_PORT1 +}; + +struct mt_uart_register { + uint32_t dll; + uint32_t dlh; + uint32_t ier; + uint32_t lcr; + uint32_t mcr; + uint32_t fcr; + uint32_t lsr; + uint32_t scr; + uint32_t efr; + uint32_t highspeed; + uint32_t sample_count; + uint32_t sample_point; + uint32_t fracdiv_l; + uint32_t fracdiv_m; + uint32_t escape_en; + uint32_t guard; + uint32_t rx_sel; +}; + +struct mt_uart { + unsigned long base; + struct mt_uart_register registers; +}; + +/* external API */ +void mt_uart_save(void); +void mt_uart_restore(void); +void mt_console_uart_cg(int on); +uint32_t mt_console_uart_cg_status(void); + +#endif /* __UART_H__ */ diff --git a/plat/mediatek/drivers/uart/uart8250.h b/plat/mediatek/drivers/uart/uart8250.h new file mode 100644 index 0000000..f0541d6 --- /dev/null +++ b/plat/mediatek/drivers/uart/uart8250.h @@ -0,0 +1,38 @@ +/* + * Copyright (c) 2015-2022, ARM Limited and Contributors. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +#ifndef UART8250_H +#define UART8250_H + +/* UART register */ +#define UART_RBR 0x00 /* Receive buffer register */ +#define UART_DLL 0x00 /* Divisor latch lsb */ +#define UART_THR 0x00 /* Transmit holding register */ +#define UART_DLH 0x04 /* Divisor latch msb */ +#define UART_IER 0x04 /* Interrupt enable register */ +#define UART_FCR 0x08 /* FIFO control register */ +#define UART_LCR 0x0c /* Line control register */ +#define UART_MCR 0x10 /* Modem control register */ +#define UART_LSR 0x14 /* Line status register */ +#define UART_HIGHSPEED 0x24 /* High speed UART */ + +/* FCR */ +#define UART_FCR_FIFO_EN 0x01 /* enable FIFO */ +#define UART_FCR_CLEAR_RCVR 0x02 /* clear the RCVR FIFO */ +#define UART_FCR_CLEAR_XMIT 0x04 /* clear the XMIT FIFO */ + +/* LCR */ +#define UART_LCR_WLS_8 0x03 /* 8 bit character length */ +#define UART_LCR_DLAB 0x80 /* divisor latch access bit */ + +/* MCR */ +#define UART_MCR_DTR 0x01 +#define UART_MCR_RTS 0x02 + +/* LSR */ +#define UART_LSR_DR 0x01 /* Data ready */ +#define UART_LSR_THRE 0x20 /* Xmit holding register empty */ + +#endif /* UART8250_H */ -- cgit v1.2.3