blob: b174bd6a2459c518496d2d1fdac71ca1e775be77 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
|
#
# Copyright 2017-2021 NXP
#
# SPDX-License-Identifier: BSD-3-Clause
#
#
#------------------------------------------------------------------------------
#
# This file contains the basic architecture definitions that drive the build
#
# -----------------------------------------------------------------------------
CORE_TYPE := a53
CACHE_LINE := 6
# set to GIC400 or GIC500
GIC := GIC400
# set to CCI400 or CCN504 or CCN508
INTERCONNECT := CCI400
# indicate layerscape chassis level - set to 3=LSCH3 or 2=LSCH2
CHASSIS := 2
# TZC IP Details TZC used is TZC380 or TZC400
TZC_ID := TZC380
# CONSOLE Details available is NS16550 or PL011
CONSOLE := NS16550
# Select the DDR PHY generation to be used
PLAT_DDR_PHY := PHY_GEN1
PHYS_SYS := 64
# ddr controller - set to MMDC or NXP
DDRCNTLR := NXP
# ddr phy - set to NXP or SNPS
DDRPHY := NXP
# Area of OCRAM reserved by ROM code
NXP_ROM_RSVD := 0x5900
# Max Size of CSF header. Required to define BL2 TEXT LIMIT in soc.def
# Input to CST create_hdr_esbc tool
CSF_HDR_SZ := 0x3000
# In IMAGE_BL2, compile time flag for handling Cache coherency
# with CAAM for BL2 running from OCRAM
SEC_MEM_NON_COHERENT := yes
# OCRAM MAP
OCRAM_START_ADDR := 0x10000000
OCRAM_SIZE := 0x20000
# BL2 binary is placed at start of OCRAM.
# Also used by create_pbl.mk.
BL2_BASE := 0x10000000
# After BL2 bin, OCRAM is used by ROM Code:
# (OCRAM_START_ADDR + BL2_BIN_SIZE) -> (NXP_ROM_RSVD - 1)
# After ROM Code, OCRAM is used by CSF header.
# (OCRAM_START_ADDR + BL2_TEXT_LIMIT + NXP_ROM_RSVD) -> (CSF_HDR_SZ - 1)
# BL2_HDR_LOC has to be (OCRAM_START_ADDR + OCRAM_SIZE - NXP_ROM_RSVD - CSF_HDR_SZ)
# This value should be greater than BL2_TEXT_LIMIT
# Input to CST create_hdr_isbc tool
BL2_HDR_LOC_HDR ?= $(shell echo $$(( $(OCRAM_START_ADDR) + $(OCRAM_SIZE) - $(NXP_ROM_RSVD) - $(CSF_HDR_SZ))))
# Covert to HEX to be used by create_pbl.mk
BL2_HDR_LOC := $$(echo "obase=16; ${BL2_HDR_LOC_HDR}" | bc)
# Core Errata
ERRATA_A53_855873 := 1
ERRATA_A53_1530924 := 1
# SoC ERRATAS to be enabled
ERRATA_SOC_A008850 := 1
ERRATA_SOC_A010539 := 1
ERRATA_SOC_A009660 := 1
# DDR Errata
ERRATA_DDR_A009663 := 1
ERRATA_DDR_A009942 := 1
# enable dynamic memory mapping
PLAT_XLAT_TABLES_DYNAMIC := 1
# Define Endianness of each module
NXP_GUR_ENDIANNESS := BE
NXP_DDR_ENDIANNESS := BE
NXP_SEC_ENDIANNESS := BE
NXP_SFP_ENDIANNESS := BE
NXP_SNVS_ENDIANNESS := BE
NXP_ESDHC_ENDIANNESS := BE
NXP_QSPI_ENDIANNESS := BE
NXP_FSPI_ENDIANNESS := BE
NXP_SCFG_ENDIANNESS := BE
NXP_GPIO_ENDIANNESS := BE
NXP_IFC_ENDIANNESS := BE
NXP_SFP_VER := 3_2
# OCRAM ECC Enabled
OCRAM_ECC_EN := yes
|