diff options
Diffstat (limited to '')
| -rw-r--r-- | CHANGELOG.md | 235 |
1 files changed, 235 insertions, 0 deletions
diff --git a/CHANGELOG.md b/CHANGELOG.md new file mode 100644 index 0000000..a8ebe82 --- /dev/null +++ b/CHANGELOG.md @@ -0,0 +1,235 @@ +# asciinema changelog + +## 2.4.0 (2023-10-23) + +* When recording without file arg we now ask whether to save, upload or discard the recording (#576) +* Added capture of terminal resize events (#565) +* Fixed blocking write error when PTY master is not ready (#569) (thanks @Low-power!) +* Fixed "broken pipe" errors when piping certain commands during recording (#369) (thanks @Low-power!) +* Fixed crash during playback of cast files with trailing blank line (#577) + +## 2.3.0 (2023-07-05) + +* Added official support for Python 3.11 +* Dropped official support for Python 3.6 +* Implemented markers in `rec` and `play -m` commands +* Added `--loop` option for looped playback in `play` command +* Added `--stream` and `--out-fmt` option for customizing output of `play` command +* Improved terminal charset detection (thanks @djds) +* Extended `cat` command to support multiple files (thanks @Low-power) +* Improved upload error messages +* Fixed direct playback from URL +* Made raw output start with terminal size sequence (`\e[8;H;Wt`) +* Prevented recording to stdout when it's a TTY +* Added target file permission checks to avoid ugly errors +* Removed named pipe re-opening, which was causing hangs in certain scenarios +* Improved PTY/TTY data reading - it goes in bigger chunks now (256 kb) +* Fixed deadlock in PTY writes (thanks @Low-power) +* Improved input forwarding from stdin +* Ignored OSC responses in recorded stdin stream + +## 2.2.0 (2022-05-07) + +* Added official support for Python 3.8, 3.9, 3.10 +* Dropped official support for Python 3.5 +* Added `--cols` / `--rows` options for overriding size of pseudo-terminal reported to recorded program +* Improved behaviour of `--append` when output file doesn't exist +* Keyboard input is now explicitly read from a TTY device in addition to stdin (when stdin != TTY) +* Recorded program output is now explicitly written to a TTY device instead of stdout +* Dash char (`-`) can now be passed as output filename to write asciicast to stdout +* Diagnostic messages are now printed to stderr (without colors when stderr != TTY) +* Improved robustness of writing asciicast to named pipes +* Lots of codebase modernizations (many thanks to Davis @djds Schirmer!) +* Many other internal refactorings + +## 2.1.0 (2021-10-02) + +* Ability to pause/resume terminal capture with `C-\` key shortcut +* Desktop notifications - only for the above pause feature at the moment +* Removed dependency on tput/ncurses (thanks @arp242 / Martin Tournoij!) +* ASCIINEMA_REC env var is back (thanks @landonb / Landon Bouma!) +* Terminal answerbacks (CSI 6 n) in `asciinema cat` are now hidden (thanks @djpohly / Devin J. Pohly!) +* Codeset detection works on HP-UX now (thanks @michael-o / Michael Osipov!) +* Attempt at recording to existing file suggests use of `--overwrite` option now +* Upload for users with very long `$USER` is fixed +* Added official support for Python 3.8 and 3.9 +* Dropped official support for EOL-ed Python 3.4 and 3.5 + +## 2.0.2 (2019-01-12) + +* Official support for Python 3.7 +* Recording is now possible on US-ASCII locale (thanks Jean-Philippe @jpouellet Ouellet!) +* Improved Android support (thanks Fredrik @fornwall Fornwall!) +* Possibility of programatic recording with `asciinema.record_asciicast` function +* Uses new JSON response format added recently to asciinema-server +* Tweaked message about how to stop recording (thanks Bachynin @vanyakosmos Ivan!) +* Added proper description and other metadata to Python package (thanks @Crestwave!) + +## 2.0.1 (2018-04-04) + +* Fixed example in asciicast v2 format doc (thanks Josh "@anowlcalledjosh" Holland!) +* Replaced deprecated `encodestring` (since Python 3.1) with `encodebytes` (thanks @delirious-lettuce!) +* Fixed location of config dir (you can `mv ~/.asciinema ~/.config/asciinema`) +* Internal refactorings + +## 2.0 (2018-02-10) + +This major release brings many new features, improvements and bugfixes. The most +notable ones: + +* new [asciicast v2 file format](doc/asciicast-v2.md) +* recording and playback of arbitrarily long session with minimal memory usage +* ability to live-stream via UNIX pipe: `asciinema rec unix.pipe` + `asciinema play unix.pipe` in second terminal tab/window +* optional stdin recording (`asciinema rec --stdin`) +* appending to existing recording (`asciinema rec --append <filename>`) +* raw recording mode, storing only stdout bytes (`asciinema rec --raw <filename>`) +* environment variable white-listing (`asciinema rec --env="VAR1,VAR2..."`) +* toggling pause in `asciinema play` by <kbd>Space</kbd> +* stepping through a recording one frame at a time with <kbd>.</kbd> (when playback paused) +* new `asciinema cat <filename>` command to dump full output of the recording +* playback from new IPFS URL scheme: `dweb:/ipfs/` (replaces `fs:/`) +* lots of other bugfixes and improvements +* dropped official support for Python 3.3 (although it still works on 3.3) + +## 1.4.0 (2017-04-11) + +* Dropped distutils fallback in setup.py - setuptools required now (thanks Jakub "@jakubjedelsky" Jedelsky!) +* Dropped official support for Python 3.2 (although it still works on 3.2) +* New `--speed` option for `asciinema play` (thanks Bastiaan "@bastiaanb" Bakker!) +* Ability to set API token via `ASCIINEMA_API_TOKEN` env variable (thanks Samantha "@samdmarshall" Marshall!) +* Improved shutdown on more signals: CHLD, HUP, TERM, QUIT (thanks Richard "@typerlc"!) +* Fixed stdin handling during playback via `asciinema play` + +## 1.3.0 (2016-07-13) + +This release brings back the original Python implementation of asciinema. It's +based on 0.9.8 codebase and adds all features and bug fixes that have been +implemented in asciinema's Go version between 0.9.8 and 1.2.0. + +Other notable changes: + +* Zero dependencies! (other than Python 3) +* Fixed crash when resizing terminal window during recording (#167) +* Fixed upload from IPv6 hosts (#94) +* Improved UTF-8 charset detection (#160) +* `-q/--quiet` option can be saved in config file now +* Final "logout" (produced by csh) is now removed from recorded stdout +* `rec` command now tries to write to target path before starting recording + +## 1.2.0 (2016-02-22) + +* Added playback from stdin: `cat demo.json | asciinema play -` +* Added playback from IPFS: `asciinema play ipfs:/ipfs/QmcdXYJp6e4zNuimuGeWPwNMHQdxuqWmKx7NhZofQ1nw2V` +* Added playback from asciicast page URL: `asciinema play https://asciinema.org/a/22124` +* `-q/--quiet` option added to `rec` command +* Fixed handling of partial UTF-8 sequences in recorded stdout +* Final "exit" is now removed from recorded stdout +* Longer operations like uploading/downloading show "spinner" + +## 1.1.1 (2015-06-21) + +* Fixed putting terminal in raw mode (fixes ctrl-o in nano) + +## 1.1.0 (2015-05-25) + +* `--max-wait` option is now also available for `play` command +* Added support for compilation on FreeBSD +* Improved locale/charset detection +* Improved upload error messages +* New config file location (with backwards compatibility) + +## 1.0.0 (2015-03-12) + +* `--max-wait` and `--yes` options can be saved in config file +* Support for displaying warning messages returned from API +* Also, see changes for 1.0.0 release candidates below + +## 1.0.0.rc2 (2015-03-08) + +* All dependencies are vendored now in Godeps dir +* Help message includes all commands with their possible options +* `-y` and `-t` options have longer alternatives: `--yes`, `--title` +* `--max-wait` option has shorter alternative: `-w` +* Import paths changed to `github.com/asciinema/asciinema` due to repository + renaming +* `-y` also suppresess "please resize terminal" prompt + +## 1.0.0.rc1 (2015-03-02) + +* New [asciicast file format](doc/asciicast-v1.md) +* `rec` command can now record to file +* New commands: `play <filename>` and `upload <filename>` +* UTF-8 native locale is now required +* Added handling of status 413 and 422 by printing user friendly message + +## 0.9.9 (2014-12-17) + +* Rewritten in Go +* License changed to GPLv3 +* `--max-wait` option added to `rec` command +* Recorded process has `ASCIINEMA_REC` env variable set (useful for "rec" + indicator in shell's `$PROMPT/$RPROMPT`) +* No more terminal resetting (via `reset` command) before and after recording +* Informative messages are coloured to be distinguishable from normal output +* Improved error messages + +## 0.9.8 (2014-02-09) + +* Rename user_token to api_token +* Improvements to test suite +* Send User-Agent including client version number, python version and platform +* Handle 503 status as server maintenance +* Handle 404 response as a request for client upgrade + +## 0.9.7 (2013-10-07) + +* Depend on requests==1.1.0, not 2.0 + +## 0.9.6 (2013-10-06) + +* Remove install script +* Introduce proper python package: https://pypi.python.org/pypi/asciinema +* Make the code compatible with both python 2 and 3 +* Use requests lib instead of urrlib(2) + +## 0.9.5 (2013-10-04) + +* Fixed measurement of total recording time +* Improvements to install script +* Introduction of Homebrew formula + +## 0.9.4 (2013-10-03) + +* Use python2.7 in shebang + +## 0.9.3 (2013-10-03) + +* Re-enable resetting of a terminal before and after recording +* Add Arch Linux source package + +## 0.9.2 (2013-10-02) + +* Use os.uname over running the uname command +* Add basic integration tests +* Make PtyRecorder test stable again +* Move install script out of bin dir + +## 0.9.1 (2013-10-01) + +* Split monolithic script into separate classes/files +* Remove upload queue +* Use python2 in generated binary's shebang +* Delay config file creation until user_token is requested +* Introduce command classes for handling cli commands +* Split the recorder into classes with well defined responsibilities +* Drop curl dependency, use urllib(2) for http requests + +## 0.9.0 (2013-09-24) + +* Project rename from "ascii.io" to "asciinema" + +## ... limbo? ... + +## 0.1 (2012-03-11) + +* Initial release |