From 6c18848a903eb3ee06dccd915859ce64195c257c Mon Sep 17 00:00:00 2001
From: Daniel Baumann <daniel.baumann@progress-linux.org>
Date: Mon, 15 Apr 2024 18:24:27 +0200
Subject: Adding upstream version 1:2.11.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
---
 test/fixtures/nmap/nmap-h.txt | 114 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 114 insertions(+)
 create mode 100644 test/fixtures/nmap/nmap-h.txt

(limited to 'test/fixtures/nmap/nmap-h.txt')

diff --git a/test/fixtures/nmap/nmap-h.txt b/test/fixtures/nmap/nmap-h.txt
new file mode 100644
index 0000000..0301d37
--- /dev/null
+++ b/test/fixtures/nmap/nmap-h.txt
@@ -0,0 +1,114 @@
+Nmap 7.60 ( https://nmap.org )
+Usage: nmap [Scan Type(s)] [Options] {target specification}
+TARGET SPECIFICATION:
+  Can pass hostnames, IP addresses, networks, etc.
+  Ex: scanme.nmap.org, microsoft.com/24, 192.168.0.1; 10.0.0-255.1-254
+  -iL <inputfilename>: Input from list of hosts/networks
+  -iR <num hosts>: Choose random targets
+  --exclude <host1[,host2][,host3],...>: Exclude hosts/networks
+  --excludefile <exclude_file>: Exclude list from file
+HOST DISCOVERY:
+  -sL: List Scan - simply list targets to scan
+  -sn: Ping Scan - disable port scan
+  -Pn: Treat all hosts as online -- skip host discovery
+  -PS/PA/PU/PY[portlist]: TCP SYN/ACK, UDP or SCTP discovery to given ports
+  -PE/PP/PM: ICMP echo, timestamp, and netmask request discovery probes
+  -PO[protocol list]: IP Protocol Ping
+  -n/-R: Never do DNS resolution/Always resolve [default: sometimes]
+  --dns-servers <serv1[,serv2],...>: Specify custom DNS servers
+  --system-dns: Use OS's DNS resolver
+  --traceroute: Trace hop path to each host
+SCAN TECHNIQUES:
+  -sS/sT/sA/sW/sM: TCP SYN/Connect()/ACK/Window/Maimon scans
+  -sU: UDP Scan
+  -sN/sF/sX: TCP Null, FIN, and Xmas scans
+  --scanflags <flags>: Customize TCP scan flags
+  -sI <zombie host[:probeport]>: Idle scan
+  -sY/sZ: SCTP INIT/COOKIE-ECHO scans
+  -sO: IP protocol scan
+  -b <FTP relay host>: FTP bounce scan
+PORT SPECIFICATION AND SCAN ORDER:
+  -p <port ranges>: Only scan specified ports
+    Ex: -p22; -p1-65535; -p U:53,111,137,T:21-25,80,139,8080,S:9
+  --exclude-ports <port ranges>: Exclude the specified ports from scanning
+  -F: Fast mode - Scan fewer ports than the default scan
+  -r: Scan ports consecutively - don't randomize
+  --top-ports <number>: Scan <number> most common ports
+  --port-ratio <ratio>: Scan ports more common than <ratio>
+SERVICE/VERSION DETECTION:
+  -sV: Probe open ports to determine service/version info
+  --version-intensity <level>: Set from 0 (light) to 9 (try all probes)
+  --version-light: Limit to most likely probes (intensity 2)
+  --version-all: Try every single probe (intensity 9)
+  --version-trace: Show detailed version scan activity (for debugging)
+SCRIPT SCAN:
+  -sC: equivalent to --script=default
+  --script=<Lua scripts>: <Lua scripts> is a comma separated list of
+           directories, script-files or script-categories
+  --script-args=<n1=v1,[n2=v2,...]>: provide arguments to scripts
+  --script-args-file=filename: provide NSE script args in a file
+  --script-trace: Show all data sent and received
+  --script-updatedb: Update the script database.
+  --script-help=<Lua scripts>: Show help about scripts.
+           <Lua scripts> is a comma-separated list of script-files or
+           script-categories.
+OS DETECTION:
+  -O: Enable OS detection
+  --osscan-limit: Limit OS detection to promising targets
+  --osscan-guess: Guess OS more aggressively
+TIMING AND PERFORMANCE:
+  Options which take <time> are in seconds, or append 'ms' (milliseconds),
+  's' (seconds), 'm' (minutes), or 'h' (hours) to the value (e.g. 30m).
+  -T<0-5>: Set timing template (higher is faster)
+  --min-hostgroup/max-hostgroup <size>: Parallel host scan group sizes
+  --min-parallelism/max-parallelism <numprobes>: Probe parallelization
+  --min-rtt-timeout/max-rtt-timeout/initial-rtt-timeout <time>: Specifies
+      probe round trip time.
+  --max-retries <tries>: Caps number of port scan probe retransmissions.
+  --host-timeout <time>: Give up on target after this long
+  --scan-delay/--max-scan-delay <time>: Adjust delay between probes
+  --min-rate <number>: Send packets no slower than <number> per second
+  --max-rate <number>: Send packets no faster than <number> per second
+FIREWALL/IDS EVASION AND SPOOFING:
+  -f; --mtu <val>: fragment packets (optionally w/given MTU)
+  -D <decoy1,decoy2[,ME],...>: Cloak a scan with decoys
+  -S <IP_Address>: Spoof source address
+  -e <iface>: Use specified interface
+  -g/--source-port <portnum>: Use given port number
+  --proxies <url1,[url2],...>: Relay connections through HTTP/SOCKS4 proxies
+  --data <hex string>: Append a custom payload to sent packets
+  --data-string <string>: Append a custom ASCII string to sent packets
+  --data-length <num>: Append random data to sent packets
+  --ip-options <options>: Send packets with specified ip options
+  --ttl <val>: Set IP time-to-live field
+  --spoof-mac <mac address/prefix/vendor name>: Spoof your MAC address
+  --badsum: Send packets with a bogus TCP/UDP/SCTP checksum
+OUTPUT:
+  -oN/-oX/-oS/-oG <file>: Output scan in normal, XML, s|<rIpt kIddi3,
+     and Grepable format, respectively, to the given filename.
+  -oA <basename>: Output in the three major formats at once
+  -v: Increase verbosity level (use -vv or more for greater effect)
+  -d: Increase debugging level (use -dd or more for greater effect)
+  --reason: Display the reason a port is in a particular state
+  --open: Only show open (or possibly open) ports
+  --packet-trace: Show all packets sent and received
+  --iflist: Print host interfaces and routes (for debugging)
+  --append-output: Append to rather than clobber specified output files
+  --resume <filename>: Resume an aborted scan
+  --stylesheet <path/URL>: XSL stylesheet to transform XML output to HTML
+  --webxml: Reference stylesheet from Nmap.Org for more portable XML
+  --no-stylesheet: Prevent associating of XSL stylesheet w/XML output
+MISC:
+  -6: Enable IPv6 scanning
+  -A: Enable OS detection, version detection, script scanning, and traceroute
+  --datadir <dirname>: Specify custom Nmap data file location
+  --send-eth/--send-ip: Send using raw ethernet frames or IP packets
+  --privileged: Assume that the user is fully privileged
+  --unprivileged: Assume the user lacks raw socket privileges
+  -V: Print version number
+  -h: Print this help summary page.
+EXAMPLES:
+  nmap -v -A scanme.nmap.org
+  nmap -v -sn 192.168.0.0/16 10.0.0.0/8
+  nmap -v -iR 10000 -Pn -p 80
+SEE THE MAN PAGE (https://nmap.org/book/man.html) FOR MORE OPTIONS AND EXAMPLES
-- 
cgit v1.2.3