diff options
| author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-05-04 12:47:55 +0000 |
|---|---|---|
| committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-05-04 12:47:55 +0000 |
| commit | 2aadc03ef15cb5ca5cc2af8a7c08e070742f0ac4 (patch) | |
| tree | 033cc839730fda84ff08db877037977be94e5e3a /vendor/regex-automata/src/dfa/sparse.rs | |
| parent | Initial commit. (diff) | |
| download | cargo-upstream.tar.xz cargo-upstream.zip | |
Adding upstream version 0.70.1+ds1.upstream/0.70.1+ds1upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'vendor/regex-automata/src/dfa/sparse.rs')
| -rw-r--r-- | vendor/regex-automata/src/dfa/sparse.rs | 2639 |
1 files changed, 2639 insertions, 0 deletions
diff --git a/vendor/regex-automata/src/dfa/sparse.rs b/vendor/regex-automata/src/dfa/sparse.rs new file mode 100644 index 0000000..d461e0a --- /dev/null +++ b/vendor/regex-automata/src/dfa/sparse.rs @@ -0,0 +1,2639 @@ +/*! +Types and routines specific to sparse DFAs. + +This module is the home of [`sparse::DFA`](DFA). + +Unlike the [`dense`] module, this module does not contain a builder or +configuration specific for sparse DFAs. Instead, the intended way to build a +sparse DFA is either by using a default configuration with its constructor +[`sparse::DFA::new`](DFA::new), or by first configuring the construction of a +dense DFA with [`dense::Builder`] and then calling [`dense::DFA::to_sparse`]. +For example, this configures a sparse DFA to do an overlapping search: + +``` +use regex_automata::{ + dfa::{Automaton, OverlappingState, dense}, + HalfMatch, Input, MatchKind, +}; + +let dense_re = dense::Builder::new() + .configure(dense::Config::new().match_kind(MatchKind::All)) + .build(r"Samwise|Sam")?; +let sparse_re = dense_re.to_sparse()?; + +// Setup our haystack and initial start state. +let input = Input::new("Samwise"); +let mut state = OverlappingState::start(); + +// First, 'Sam' will match. +sparse_re.try_search_overlapping_fwd(&input, &mut state)?; +assert_eq!(Some(HalfMatch::must(0, 3)), state.get_match()); + +// And now 'Samwise' will match. +sparse_re.try_search_overlapping_fwd(&input, &mut state)?; +assert_eq!(Some(HalfMatch::must(0, 7)), state.get_match()); +# Ok::<(), Box<dyn std::error::Error>>(()) +``` +*/ + +#[cfg(feature = "dfa-build")] +use core::iter; +use core::{ + convert::{TryFrom, TryInto}, + fmt, + mem::size_of, +}; + +#[cfg(feature = "dfa-build")] +use alloc::{vec, vec::Vec}; + +#[cfg(feature = "dfa-build")] +use crate::dfa::dense::{self, BuildError}; +use crate::{ + dfa::{ + automaton::{fmt_state_indicator, Automaton, StartError}, + dense::Flags, + special::Special, + StartKind, DEAD, + }, + util::{ + alphabet::{ByteClasses, ByteSet}, + escape::DebugByte, + int::{Pointer, Usize, U16, U32}, + prefilter::Prefilter, + primitives::{PatternID, StateID}, + search::Anchored, + start::{self, Start, StartByteMap}, + wire::{self, DeserializeError, Endian, SerializeError}, + }, +}; + +const LABEL: &str = "rust-regex-automata-dfa-sparse"; +const VERSION: u32 = 2; + +/// A sparse deterministic finite automaton (DFA) with variable sized states. +/// +/// In contrast to a [dense::DFA], a sparse DFA uses a more space efficient +/// representation for its transitions. Consequently, sparse DFAs may use much +/// less memory than dense DFAs, but this comes at a price. In particular, +/// reading the more space efficient transitions takes more work, and +/// consequently, searching using a sparse DFA is typically slower than a dense +/// DFA. +/// +/// A sparse DFA can be built using the default configuration via the +/// [`DFA::new`] constructor. Otherwise, one can configure various aspects of a +/// dense DFA via [`dense::Builder`], and then convert a dense DFA to a sparse +/// DFA using [`dense::DFA::to_sparse`]. +/// +/// In general, a sparse DFA supports all the same search operations as a dense +/// DFA. +/// +/// Making the choice between a dense and sparse DFA depends on your specific +/// work load. If you can sacrifice a bit of search time performance, then a +/// sparse DFA might be the best choice. In particular, while sparse DFAs are +/// probably always slower than dense DFAs, you may find that they are easily +/// fast enough for your purposes! +/// +/// # Type parameters +/// +/// A `DFA` has one type parameter, `T`, which is used to represent the parts +/// of a sparse DFA. `T` is typically a `Vec<u8>` or a `&[u8]`. +/// +/// # The `Automaton` trait +/// +/// This type implements the [`Automaton`] trait, which means it can be used +/// for searching. For example: +/// +/// ``` +/// use regex_automata::{dfa::{Automaton, sparse::DFA}, HalfMatch, Input}; +/// +/// let dfa = DFA::new("foo[0-9]+")?; +/// let expected = Some(HalfMatch::must(0, 8)); +/// assert_eq!(expected, dfa.try_search_fwd(&Input::new("foo12345"))?); +/// # Ok::<(), Box<dyn std::error::Error>>(()) +/// ``` +#[derive(Clone)] +pub struct DFA<T> { + // When compared to a dense DFA, a sparse DFA *looks* a lot simpler + // representation-wise. In reality, it is perhaps more complicated. Namely, + // in a dense DFA, all information needs to be very cheaply accessible + // using only state IDs. In a sparse DFA however, each state uses a + // variable amount of space because each state encodes more information + // than just its transitions. Each state also includes an accelerator if + // one exists, along with the matching pattern IDs if the state is a match + // state. + // + // That is, a lot of the complexity is pushed down into how each state + // itself is represented. + tt: Transitions<T>, + st: StartTable<T>, + special: Special, + pre: Option<Prefilter>, + quitset: ByteSet, + flags: Flags, +} + +#[cfg(feature = "dfa-build")] +impl DFA<Vec<u8>> { + /// Parse the given regular expression using a default configuration and + /// return the corresponding sparse DFA. + /// + /// If you want a non-default configuration, then use the + /// [`dense::Builder`] to set your own configuration, and then call + /// [`dense::DFA::to_sparse`] to create a sparse DFA. + /// + /// # Example + /// + /// ``` + /// use regex_automata::{dfa::{Automaton, sparse}, HalfMatch, Input}; + /// + /// let dfa = sparse::DFA::new("foo[0-9]+bar")?; + /// + /// let expected = Some(HalfMatch::must(0, 11)); + /// assert_eq!(expected, dfa.try_search_fwd(&Input::new("foo12345bar"))?); + /// # Ok::<(), Box<dyn std::error::Error>>(()) + /// ``` + #[cfg(feature = "syntax")] + pub fn new(pattern: &str) -> Result<DFA<Vec<u8>>, BuildError> { + dense::Builder::new() + .build(pattern) + .and_then(|dense| dense.to_sparse()) + } + + /// Parse the given regular expressions using a default configuration and + /// return the corresponding multi-DFA. + /// + /// If you want a non-default configuration, then use the + /// [`dense::Builder`] to set your own configuration, and then call + /// [`dense::DFA::to_sparse`] to create a sparse DFA. + /// + /// # Example + /// + /// ``` + /// use regex_automata::{dfa::{Automaton, sparse}, HalfMatch, Input}; + /// + /// let dfa = sparse::DFA::new_many(&["[0-9]+", "[a-z]+"])?; + /// let expected = Some(HalfMatch::must(1, 3)); + /// assert_eq!(expected, dfa.try_search_fwd(&Input::new("foo12345bar"))?); + /// # Ok::<(), Box<dyn std::error::Error>>(()) + /// ``` + #[cfg(feature = "syntax")] + pub fn new_many<P: AsRef<str>>( + patterns: &[P], + ) -> Result<DFA<Vec<u8>>, BuildError> { + dense::Builder::new() + .build_many(patterns) + .and_then(|dense| dense.to_sparse()) + } +} + +#[cfg(feature = "dfa-build")] +impl DFA<Vec<u8>> { + /// Create a new DFA that matches every input. + /// + /// # Example + /// + /// ``` + /// use regex_automata::{ + /// dfa::{Automaton, sparse}, + /// HalfMatch, Input, + /// }; + /// + /// let dfa = sparse::DFA::always_match()?; + /// + /// let expected = Some(HalfMatch::must(0, 0)); + /// assert_eq!(expected, dfa.try_search_fwd(&Input::new(""))?); + /// assert_eq!(expected, dfa.try_search_fwd(&Input::new("foo"))?); + /// # Ok::<(), Box<dyn std::error::Error>>(()) + /// ``` + pub fn always_match() -> Result<DFA<Vec<u8>>, BuildError> { + dense::DFA::always_match()?.to_sparse() + } + + /// Create a new sparse DFA that never matches any input. + /// + /// # Example + /// + /// ``` + /// use regex_automata::{dfa::{Automaton, sparse}, Input}; + /// + /// let dfa = sparse::DFA::never_match()?; + /// assert_eq!(None, dfa.try_search_fwd(&Input::new(""))?); + /// assert_eq!(None, dfa.try_search_fwd(&Input::new("foo"))?); + /// # Ok::<(), Box<dyn std::error::Error>>(()) + /// ``` + pub fn never_match() -> Result<DFA<Vec<u8>>, BuildError> { + dense::DFA::never_match()?.to_sparse() + } + + /// The implementation for constructing a sparse DFA from a dense DFA. + pub(crate) fn from_dense<T: AsRef<[u32]>>( + dfa: &dense::DFA<T>, + ) -> Result<DFA<Vec<u8>>, BuildError> { + // In order to build the transition table, we need to be able to write + // state identifiers for each of the "next" transitions in each state. + // Our state identifiers correspond to the byte offset in the + // transition table at which the state is encoded. Therefore, we do not + // actually know what the state identifiers are until we've allocated + // exactly as much space as we need for each state. Thus, construction + // of the transition table happens in two passes. + // + // In the first pass, we fill out the shell of each state, which + // includes the transition length, the input byte ranges and + // zero-filled space for the transitions and accelerators, if present. + // In this first pass, we also build up a map from the state identifier + // index of the dense DFA to the state identifier in this sparse DFA. + // + // In the second pass, we fill in the transitions based on the map + // built in the first pass. + + // The capacity given here reflects a minimum. (Well, the true minimum + // is likely even bigger, but hopefully this saves a few reallocs.) + let mut sparse = Vec::with_capacity(StateID::SIZE * dfa.state_len()); + // This maps state indices from the dense DFA to StateIDs in the sparse + // DFA. We build out this map on the first pass, and then use it in the + // second pass to back-fill our transitions. + let mut remap: Vec<StateID> = vec![DEAD; dfa.state_len()]; + for state in dfa.states() { + let pos = sparse.len(); + + remap[dfa.to_index(state.id())] = StateID::new(pos) + .map_err(|_| BuildError::too_many_states())?; + // zero-filled space for the transition length + sparse.push(0); + sparse.push(0); + + let mut transition_len = 0; + for (unit1, unit2, _) in state.sparse_transitions() { + match (unit1.as_u8(), unit2.as_u8()) { + (Some(b1), Some(b2)) => { + transition_len += 1; + sparse.push(b1); + sparse.push(b2); + } + (None, None) => {} + (Some(_), None) | (None, Some(_)) => { + // can never occur because sparse_transitions never + // groups EOI with any other transition. + unreachable!() + } + } + } + // Add dummy EOI transition. This is never actually read while + // searching, but having space equivalent to the total number + // of transitions is convenient. Otherwise, we'd need to track + // a different number of transitions for the byte ranges as for + // the 'next' states. + // + // N.B. The loop above is not guaranteed to yield the EOI + // transition, since it may point to a DEAD state. By putting + // it here, we always write the EOI transition, and thus + // guarantee that our transition length is >0. Why do we always + // need the EOI transition? Because in order to implement + // Automaton::next_eoi_state, this lets us just ask for the last + // transition. There are probably other/better ways to do this. + transition_len += 1; + sparse.push(0); + sparse.push(0); + + // Check some assumptions about transition length. + assert_ne!( + transition_len, 0, + "transition length should be non-zero", + ); + assert!( + transition_len <= 257, + "expected transition length {} to be <= 257", + transition_len, + ); + + // Fill in the transition length. + // Since transition length is always <= 257, we use the most + // significant bit to indicate whether this is a match state or + // not. + let ntrans = if dfa.is_match_state(state.id()) { + transition_len | (1 << 15) + } else { + transition_len + }; + wire::NE::write_u16(ntrans, &mut sparse[pos..]); + + // zero-fill the actual transitions. + // Unwraps are OK since transition_length <= 257 and our minimum + // support usize size is 16-bits. + let zeros = usize::try_from(transition_len) + .unwrap() + .checked_mul(StateID::SIZE) + .unwrap(); + sparse.extend(iter::repeat(0).take(zeros)); + + // If this is a match state, write the pattern IDs matched by this + // state. + if dfa.is_match_state(state.id()) { + let plen = dfa.match_pattern_len(state.id()); + // Write the actual pattern IDs with a u32 length prefix. + // First, zero-fill space. + let mut pos = sparse.len(); + // Unwraps are OK since it's guaranteed that plen <= + // PatternID::LIMIT, which is in turn guaranteed to fit into a + // u32. + let zeros = size_of::<u32>() + .checked_mul(plen) + .unwrap() + .checked_add(size_of::<u32>()) + .unwrap(); + sparse.extend(iter::repeat(0).take(zeros)); + + // Now write the length prefix. + wire::NE::write_u32( + // Will never fail since u32::MAX is invalid pattern ID. + // Thus, the number of pattern IDs is representable by a + // u32. + plen.try_into().expect("pattern ID length fits in u32"), + &mut sparse[pos..], + ); + pos += size_of::<u32>(); + + // Now write the pattern IDs. + for &pid in dfa.pattern_id_slice(state.id()) { + pos += wire::write_pattern_id::<wire::NE>( + pid, + &mut sparse[pos..], + ); + } + } + + // And now add the accelerator, if one exists. An accelerator is + // at most 4 bytes and at least 1 byte. The first byte is the + // length, N. N bytes follow the length. The set of bytes that + // follow correspond (exhaustively) to the bytes that must be seen + // to leave this state. + let accel = dfa.accelerator(state.id()); + sparse.push(accel.len().try_into().unwrap()); + sparse.extend_from_slice(accel); + } + + let mut new = DFA { + tt: Transitions { + sparse, + classes: dfa.byte_classes().clone(), + state_len: dfa.state_len(), + pattern_len: dfa.pattern_len(), + }, + st: StartTable::from_dense_dfa(dfa, &remap)?, + special: dfa.special().remap(|id| remap[dfa.to_index(id)]), + pre: dfa.get_prefilter().map(|p| p.clone()), + quitset: dfa.quitset().clone(), + flags: dfa.flags().clone(), + }; + // And here's our second pass. Iterate over all of the dense states + // again, and update the transitions in each of the states in the + // sparse DFA. + for old_state in dfa.states() { + let new_id = remap[dfa.to_index(old_state.id())]; + let mut new_state = new.tt.state_mut(new_id); + let sparse = old_state.sparse_transitions(); + for (i, (_, _, next)) in sparse.enumerate() { + let next = remap[dfa.to_index(next)]; + new_state.set_next_at(i, next); + } + } + debug!( + "created sparse DFA, memory usage: {} (dense memory usage: {})", + new.memory_usage(), + dfa.memory_usage(), + ); + Ok(new) + } +} + +impl<T: AsRef<[u8]>> DFA<T> { + /// Cheaply return a borrowed version of this sparse DFA. Specifically, the + /// DFA returned always uses `&[u8]` for its transitions. + pub fn as_ref<'a>(&'a self) -> DFA<&'a [u8]> { + DFA { + tt: self.tt.as_ref(), + st: self.st.as_ref(), + special: self.special, + pre: self.pre.clone(), + quitset: self.quitset, + flags: self.flags, + } + } + + /// Return an owned version of this sparse DFA. Specifically, the DFA + /// returned always uses `Vec<u8>` for its transitions. + /// + /// Effectively, this returns a sparse DFA whose transitions live on the + /// heap. + #[cfg(feature = "alloc")] + pub fn to_owned(&self) -> DFA<alloc::vec::Vec<u8>> { + DFA { + tt: self.tt.to_owned(), + st: self.st.to_owned(), + special: self.special, + pre: self.pre.clone(), + quitset: self.quitset, + flags: self.flags, + } + } + + /// Returns the starting state configuration for this DFA. + /// + /// The default is [`StartKind::Both`], which means the DFA supports both + /// unanchored and anchored searches. However, this can generally lead to + /// bigger DFAs. Therefore, a DFA might be compiled with support for just + /// unanchored or anchored searches. In that case, running a search with + /// an unsupported configuration will panic. + pub fn start_kind(&self) -> StartKind { + self.st.kind + } + + /// Returns true only if this DFA has starting states for each pattern. + /// + /// When a DFA has starting states for each pattern, then a search with the + /// DFA can be configured to only look for anchored matches of a specific + /// pattern. Specifically, APIs like [`Automaton::try_search_fwd`] can + /// accept a [`Anchored::Pattern`] if and only if this method returns true. + /// Otherwise, an error will be returned. + /// + /// Note that if the DFA is empty, this always returns false. + pub fn starts_for_each_pattern(&self) -> bool { + self.st.pattern_len.is_some() + } + + /// Returns the equivalence classes that make up the alphabet for this DFA. + /// + /// Unless [`dense::Config::byte_classes`] was disabled, it is possible + /// that multiple distinct bytes are grouped into the same equivalence + /// class if it is impossible for them to discriminate between a match and + /// a non-match. This has the effect of reducing the overall alphabet size + /// and in turn potentially substantially reducing the size of the DFA's + /// transition table. + /// + /// The downside of using equivalence classes like this is that every state + /// transition will automatically use this map to convert an arbitrary + /// byte to its corresponding equivalence class. In practice this has a + /// negligible impact on performance. + pub fn byte_classes(&self) -> &ByteClasses { + &self.tt.classes + } + + /// Returns the memory usage, in bytes, of this DFA. + /// + /// The memory usage is computed based on the number of bytes used to + /// represent this DFA. + /// + /// This does **not** include the stack size used up by this DFA. To + /// compute that, use `std::mem::size_of::<sparse::DFA>()`. + pub fn memory_usage(&self) -> usize { + self.tt.memory_usage() + self.st.memory_usage() + } +} + +/// Routines for converting a sparse DFA to other representations, such as raw +/// bytes suitable for persistent storage. +impl<T: AsRef<[u8]>> DFA<T> { + /// Serialize this DFA as raw bytes to a `Vec<u8>` in little endian + /// format. + /// + /// The written bytes are guaranteed to be deserialized correctly and + /// without errors in a semver compatible release of this crate by a + /// `DFA`'s deserialization APIs (assuming all other criteria for the + /// deserialization APIs has been satisfied): + /// + /// * [`DFA::from_bytes`] + /// * [`DFA::from_bytes_unchecked`] + /// + /// Note that unlike a [`dense::DFA`]'s serialization methods, this does + /// not add any initial padding to the returned bytes. Padding isn't + /// required for sparse DFAs since they have no alignment requirements. + /// + /// # Example + /// + /// This example shows how to serialize and deserialize a DFA: + /// + /// ``` + /// use regex_automata::{dfa::{Automaton, sparse::DFA}, HalfMatch, Input}; + /// + /// // Compile our original DFA. + /// let original_dfa = DFA::new("foo[0-9]+")?; + /// + /// // N.B. We use native endianness here to make the example work, but + /// // using to_bytes_little_endian would work on a little endian target. + /// let buf = original_dfa.to_bytes_native_endian(); + /// // Even if buf has initial padding, DFA::from_bytes will automatically + /// // ignore it. + /// let dfa: DFA<&[u8]> = DFA::from_bytes(&buf)?.0; + /// + /// let expected = Some(HalfMatch::must(0, 8)); + /// assert_eq!(expected, dfa.try_search_fwd(&Input::new("foo12345"))?); + /// # Ok::<(), Box<dyn std::error::Error>>(()) + /// ``` + #[cfg(feature = "dfa-build")] + pub fn to_bytes_little_endian(&self) -> Vec<u8> { + self.to_bytes::<wire::LE>() + } + + /// Serialize this DFA as raw bytes to a `Vec<u8>` in big endian + /// format. + /// + /// The written bytes are guaranteed to be deserialized correctly and + /// without errors in a semver compatible release of this crate by a + /// `DFA`'s deserialization APIs (assuming all other criteria for the + /// deserialization APIs has been satisfied): + /// + /// * [`DFA::from_bytes`] + /// * [`DFA::from_bytes_unchecked`] + /// + /// Note that unlike a [`dense::DFA`]'s serialization methods, this does + /// not add any initial padding to the returned bytes. Padding isn't + /// required for sparse DFAs since they have no alignment requirements. + /// + /// # Example + /// + /// This example shows how to serialize and deserialize a DFA: + /// + /// ``` + /// use regex_automata::{dfa::{Automaton, sparse::DFA}, HalfMatch, Input}; + /// + /// // Compile our original DFA. + /// let original_dfa = DFA::new("foo[0-9]+")?; + /// + /// // N.B. We use native endianness here to make the example work, but + /// // using to_bytes_big_endian would work on a big endian target. + /// let buf = original_dfa.to_bytes_native_endian(); + /// // Even if buf has initial padding, DFA::from_bytes will automatically + /// // ignore it. + /// let dfa: DFA<&[u8]> = DFA::from_bytes(&buf)?.0; + /// + /// let expected = Some(HalfMatch::must(0, 8)); + /// assert_eq!(expected, dfa.try_search_fwd(&Input::new("foo12345"))?); + /// # Ok::<(), Box<dyn std::error::Error>>(()) + /// ``` + #[cfg(feature = "dfa-build")] + pub fn to_bytes_big_endian(&self) -> Vec<u8> { + self.to_bytes::<wire::BE>() + } + + /// Serialize this DFA as raw bytes to a `Vec<u8>` in native endian + /// format. + /// + /// The written bytes are guaranteed to be deserialized correctly and + /// without errors in a semver compatible release of this crate by a + /// `DFA`'s deserialization APIs (assuming all other criteria for the + /// deserialization APIs has been satisfied): + /// + /// * [`DFA::from_bytes`] + /// * [`DFA::from_bytes_unchecked`] + /// + /// Note that unlike a [`dense::DFA`]'s serialization methods, this does + /// not add any initial padding to the returned bytes. Padding isn't + /// required for sparse DFAs since they have no alignment requirements. + /// + /// Generally speaking, native endian format should only be used when + /// you know that the target you're compiling the DFA for matches the + /// endianness of the target on which you're compiling DFA. For example, + /// if serialization and deserialization happen in the same process or on + /// the same machine. Otherwise, when serializing a DFA for use in a + /// portable environment, you'll almost certainly want to serialize _both_ + /// a little endian and a big endian version and then load the correct one + /// based on the target's configuration. + /// + /// # Example + /// + /// This example shows how to serialize and deserialize a DFA: + /// + /// ``` + /// use regex_automata::{dfa::{Automaton, sparse::DFA}, HalfMatch, Input}; + /// + /// // Compile our original DFA. + /// let original_dfa = DFA::new("foo[0-9]+")?; + /// + /// let buf = original_dfa.to_bytes_native_endian(); + /// // Even if buf has initial padding, DFA::from_bytes will automatically + /// // ignore it. + /// let dfa: DFA<&[u8]> = DFA::from_bytes(&buf)?.0; + /// + /// let expected = Some(HalfMatch::must(0, 8)); + /// assert_eq!(expected, dfa.try_search_fwd(&Input::new("foo12345"))?); + /// # Ok::<(), Box<dyn std::error::Error>>(()) + /// ``` + #[cfg(feature = "dfa-build")] + pub fn to_bytes_native_endian(&self) -> Vec<u8> { + self.to_bytes::<wire::NE>() + } + + /// The implementation of the public `to_bytes` serialization methods, + /// which is generic over endianness. + #[cfg(feature = "dfa-build")] + fn to_bytes<E: Endian>(&self) -> Vec<u8> { + let mut buf = vec![0; self.write_to_len()]; + // This should always succeed since the only possible serialization + // error is providing a buffer that's too small, but we've ensured that + // `buf` is big enough here. + self.write_to::<E>(&mut buf).unwrap(); + buf + } + + /// Serialize this DFA as raw bytes to the given slice, in little endian + /// format. Upon success, the total number of bytes written to `dst` is + /// returned. + /// + /// The written bytes are guaranteed to be deserialized correctly and + /// without errors in a semver compatible release of this crate by a + /// `DFA`'s deserialization APIs (assuming all other criteria for the + /// deserialization APIs has been satisfied): + /// + /// * [`DFA::from_bytes`] + /// * [`DFA::from_bytes_unchecked`] + /// + /// # Errors + /// + /// This returns an error if the given destination slice is not big enough + /// to contain the full serialized DFA. If an error occurs, then nothing + /// is written to `dst`. + /// + /// # Example + /// + /// This example shows how to serialize and deserialize a DFA without + /// dynamic memory allocation. + /// + /// ``` + /// use regex_automata::{dfa::{Automaton, sparse::DFA}, HalfMatch, Input}; + /// + /// // Compile our original DFA. + /// let original_dfa = DFA::new("foo[0-9]+")?; + /// + /// // Create a 4KB buffer on the stack to store our serialized DFA. + /// let mut buf = [0u8; 4 * (1<<10)]; + /// // N.B. We use native endianness here to make the example work, but + /// // using write_to_little_endian would work on a little endian target. + /// let written = original_dfa.write_to_native_endian(&mut buf)?; + /// let dfa: DFA<&[u8]> = DFA::from_bytes(&buf[..written])?.0; + /// + /// let expected = Some(HalfMatch::must(0, 8)); + /// assert_eq!(expected, dfa.try_search_fwd(&Input::new("foo12345"))?); + /// # Ok::<(), Box<dyn std::error::Error>>(()) + /// ``` + pub fn write_to_little_endian( + &self, + dst: &mut [u8], + ) -> Result<usize, SerializeError> { + self.write_to::<wire::LE>(dst) + } + + /// Serialize this DFA as raw bytes to the given slice, in big endian + /// format. Upon success, the total number of bytes written to `dst` is + /// returned. + /// + /// The written bytes are guaranteed to be deserialized correctly and + /// without errors in a semver compatible release of this crate by a + /// `DFA`'s deserialization APIs (assuming all other criteria for the + /// deserialization APIs has been satisfied): + /// + /// * [`DFA::from_bytes`] + /// * [`DFA::from_bytes_unchecked`] + /// + /// # Errors + /// + /// This returns an error if the given destination slice is not big enough + /// to contain the full serialized DFA. If an error occurs, then nothing + /// is written to `dst`. + /// + /// # Example + /// + /// This example shows how to serialize and deserialize a DFA without + /// dynamic memory allocation. + /// + /// ``` + /// use regex_automata::{dfa::{Automaton, sparse::DFA}, HalfMatch, Input}; + /// + /// // Compile our original DFA. + /// let original_dfa = DFA::new("foo[0-9]+")?; + /// + /// // Create a 4KB buffer on the stack to store our serialized DFA. + /// let mut buf = [0u8; 4 * (1<<10)]; + /// // N.B. We use native endianness here to make the example work, but + /// // using write_to_big_endian would work on a big endian target. + /// let written = original_dfa.write_to_native_endian(&mut buf)?; + /// let dfa: DFA<&[u8]> = DFA::from_bytes(&buf[..written])?.0; + /// + /// let expected = Some(HalfMatch::must(0, 8)); + /// assert_eq!(expected, dfa.try_search_fwd(&Input::new("foo12345"))?); + /// # Ok::<(), Box<dyn std::error::Error>>(()) + /// ``` + pub fn write_to_big_endian( + &self, + dst: &mut [u8], + ) -> Result<usize, SerializeError> { + self.write_to::<wire::BE>(dst) + } + + /// Serialize this DFA as raw bytes to the given slice, in native endian + /// format. Upon success, the total number of bytes written to `dst` is + /// returned. + /// + /// The written bytes are guaranteed to be deserialized correctly and + /// without errors in a semver compatible release of this crate by a + /// `DFA`'s deserialization APIs (assuming all other criteria for the + /// deserialization APIs has been satisfied): + /// + /// * [`DFA::from_bytes`] + /// * [`DFA::from_bytes_unchecked`] + /// + /// Generally speaking, native endian format should only be used when + /// you know that the target you're compiling the DFA for matches the + /// endianness of the target on which you're compiling DFA. For example, + /// if serialization and deserialization happen in the same process or on + /// the same machine. Otherwise, when serializing a DFA for use in a + /// portable environment, you'll almost certainly want to serialize _both_ + /// a little endian and a big endian version and then load the correct one + /// based on the target's configuration. + /// + /// # Errors + /// + /// This returns an error if the given destination slice is not big enough + /// to contain the full serialized DFA. If an error occurs, then nothing + /// is written to `dst`. + /// + /// # Example + /// + /// This example shows how to serialize and deserialize a DFA without + /// dynamic memory allocation. + /// + /// ``` + /// use regex_automata::{dfa::{Automaton, sparse::DFA}, HalfMatch, Input}; + /// + /// // Compile our original DFA. + /// let original_dfa = DFA::new("foo[0-9]+")?; + /// + /// // Create a 4KB buffer on the stack to store our serialized DFA. + /// let mut buf = [0u8; 4 * (1<<10)]; + /// let written = original_dfa.write_to_native_endian(&mut buf)?; + /// let dfa: DFA<&[u8]> = DFA::from_bytes(&buf[..written])?.0; + /// + /// let expected = Some(HalfMatch::must(0, 8)); + /// assert_eq!(expected, dfa.try_search_fwd(&Input::new("foo12345"))?); + /// # Ok::<(), Box<dyn std::error::Error>>(()) + /// ``` + pub fn write_to_native_endian( + &self, + dst: &mut [u8], + ) -> Result<usize, SerializeError> { + self.write_to::<wire::NE>(dst) + } + + /// The implementation of the public `write_to` serialization methods, + /// which is generic over endianness. + fn write_to<E: Endian>( + &self, + dst: &mut [u8], + ) -> Result<usize, SerializeError> { + let mut nw = 0; + nw += wire::write_label(LABEL, &mut dst[nw..])?; + nw += wire::write_endianness_check::<E>(&mut dst[nw..])?; + nw += wire::write_version::<E>(VERSION, &mut dst[nw..])?; + nw += { + // Currently unused, intended for future flexibility + E::write_u32(0, &mut dst[nw..]); + size_of::<u32>() + }; + nw += self.flags.write_to::<E>(&mut dst[nw..])?; + nw += self.tt.write_to::<E>(&mut dst[nw..])?; + nw += self.st.write_to::<E>(&mut dst[nw..])?; + nw += self.special.write_to::<E>(&mut dst[nw..])?; + nw += self.quitset.write_to::<E>(&mut dst[nw..])?; + Ok(nw) + } + + /// Return the total number of bytes required to serialize this DFA. + /// + /// This is useful for determining the size of the buffer required to pass + /// to one of the serialization routines: + /// + /// * [`DFA::write_to_little_endian`] + /// * [`DFA::write_to_big_endian`] + /// * [`DFA::write_to_native_endian`] + /// + /// Passing a buffer smaller than the size returned by this method will + /// result in a serialization error. + /// + /// # Example + /// + /// This example shows how to dynamically allocate enough room to serialize + /// a sparse DFA. + /// + /// ``` + /// use regex_automata::{dfa::{Automaton, sparse::DFA}, HalfMatch, Input}; + /// + /// // Compile our original DFA. + /// let original_dfa = DFA::new("foo[0-9]+")?; + /// + /// let mut buf = vec![0; original_dfa.write_to_len()]; + /// let written = original_dfa.write_to_native_endian(&mut buf)?; + /// let dfa: DFA<&[u8]> = DFA::from_bytes(&buf[..written])?.0; + /// + /// let expected = Some(HalfMatch::must(0, 8)); + /// assert_eq!(expected, dfa.try_search_fwd(&Input::new("foo12345"))?); + /// # Ok::<(), Box<dyn std::error::Error>>(()) + /// ``` + pub fn write_to_len(&self) -> usize { + wire::write_label_len(LABEL) + + wire::write_endianness_check_len() + + wire::write_version_len() + + size_of::<u32>() // unused, intended for future flexibility + + self.flags.write_to_len() + + self.tt.write_to_len() + + self.st.write_to_len() + + self.special.write_to_len() + + self.quitset.write_to_len() + } +} + +impl<'a> DFA<&'a [u8]> { + /// Safely deserialize a sparse DFA with a specific state identifier + /// representation. Upon success, this returns both the deserialized DFA + /// and the number of bytes read from the given slice. Namely, the contents + /// of the slice beyond the DFA are not read. + /// + /// Deserializing a DFA using this routine will never allocate heap memory. + /// For safety purposes, the DFA's transitions will be verified such that + /// every transition points to a valid state. If this verification is too + /// costly, then a [`DFA::from_bytes_unchecked`] API is provided, which + /// will always execute in constant time. + /// + /// The bytes given must be generated by one of the serialization APIs + /// of a `DFA` using a semver compatible release of this crate. Those + /// include: + /// + /// * [`DFA::to_bytes_little_endian`] + /// * [`DFA::to_bytes_big_endian`] + /// * [`DFA::to_bytes_native_endian`] + /// * [`DFA::write_to_little_endian`] + /// * [`DFA::write_to_big_endian`] + /// * [`DFA::write_to_native_endian`] + /// + /// The `to_bytes` methods allocate and return a `Vec<u8>` for you. The + /// `write_to` methods do not allocate and write to an existing slice + /// (which may be on the stack). Since deserialization always uses the + /// native endianness of the target platform, the serialization API you use + /// should match the endianness of the target platform. (It's often a good + /// idea to generate serialized DFAs for both forms of endianness and then + /// load the correct one based on endianness.) + /// + /// # Errors + /// + /// Generally speaking, it's easier to state the conditions in which an + /// error is _not_ returned. All of the following must be true: + /// + /// * The bytes given must be produced by one of the serialization APIs + /// on this DFA, as mentioned above. + /// * The endianness of the target platform matches the endianness used to + /// serialized the provided DFA. + /// + /// If any of the above are not true, then an error will be returned. + /// + /// Note that unlike deserializing a [`dense::DFA`], deserializing a sparse + /// DFA has no alignment requirements. That is, an alignment of `1` is + /// valid. + /// + /// # Panics + /// + /// This routine will never panic for any input. + /// + /// # Example + /// + /// This example shows how to serialize a DFA to raw bytes, deserialize it + /// and then use it for searching. + /// + /// ``` + /// use regex_automata::{dfa::{Automaton, sparse::DFA}, HalfMatch, Input}; + /// + /// let initial = DFA::new("foo[0-9]+")?; + /// let bytes = initial.to_bytes_native_endian(); + /// let dfa: DFA<&[u8]> = DFA::from_bytes(&bytes)?.0; + /// + /// let expected = Some(HalfMatch::must(0, 8)); + /// assert_eq!(expected, dfa.try_search_fwd(&Input::new("foo12345"))?); + /// # Ok::<(), Box<dyn std::error::Error>>(()) + /// ``` + /// + /// # Example: loading a DFA from static memory + /// + /// One use case this library supports is the ability to serialize a + /// DFA to disk and then use `include_bytes!` to store it in a compiled + /// Rust program. Those bytes can then be cheaply deserialized into a + /// `DFA` structure at runtime and used for searching without having to + /// re-compile the DFA (which can be quite costly). + /// + /// We can show this in two parts. The first part is serializing the DFA to + /// a file: + /// + /// ```no_run + /// use regex_automata::dfa::sparse::DFA; + /// + /// let dfa = DFA::new("foo[0-9]+")?; + /// + /// // Write a big endian serialized version of this DFA to a file. + /// let bytes = dfa.to_bytes_big_endian(); + /// std::fs::write("foo.bigendian.dfa", &bytes)?; + /// + /// // Do it again, but this time for little endian. + /// let bytes = dfa.to_bytes_little_endian(); + /// std::fs::write("foo.littleendian.dfa", &bytes)?; + /// # Ok::<(), Box<dyn std::error::Error>>(()) + /// ``` + /// + /// And now the second part is embedding the DFA into the compiled program + /// and deserializing it at runtime on first use. We use conditional + /// compilation to choose the correct endianness. We do not need to employ + /// any special tricks to ensure a proper alignment, since a sparse DFA has + /// no alignment requirements. + /// + /// ```no_run + /// use regex_automata::{ + /// dfa::{Automaton, sparse::DFA}, + /// util::lazy::Lazy, + /// HalfMatch, Input, + /// }; + /// + /// // This crate provides its own "lazy" type, kind of like + /// // lazy_static! or once_cell::sync::Lazy. But it works in no-alloc + /// // no-std environments and let's us write this using completely + /// // safe code. + /// static RE: Lazy<DFA<&'static [u8]>> = Lazy::new(|| { + /// # const _: &str = stringify! { + /// #[cfg(target_endian = "big")] + /// static BYTES: &[u8] = include_bytes!("foo.bigendian.dfa"); + /// #[cfg(target_endian = "little")] + /// static BYTES: &[u8] = include_bytes!("foo.littleendian.dfa"); + /// # }; + /// # static BYTES: &[u8] = b""; + /// + /// let (dfa, _) = DFA::from_bytes(BYTES) + /// .expect("serialized DFA should be valid"); + /// dfa + /// }); + /// + /// let expected = Ok(Some(HalfMatch::must(0, 8))); + /// assert_eq!(expected, RE.try_search_fwd(&Input::new("foo12345"))); + /// ``` + /// + /// Alternatively, consider using + /// [`lazy_static`](https://crates.io/crates/lazy_static) + /// or + /// [`once_cell`](https://crates.io/crates/once_cell), + /// which will guarantee safety for you. + pub fn from_bytes( + slice: &'a [u8], + ) -> Result<(DFA<&'a [u8]>, usize), DeserializeError> { + // SAFETY: This is safe because we validate both the sparse transitions + // (by trying to decode every state) and start state ID list below. If + // either validation fails, then we return an error. + let (dfa, nread) = unsafe { DFA::from_bytes_unchecked(slice)? }; + let seen = dfa.tt.validate(&dfa.special)?; + dfa.st.validate(&dfa.special, &seen)?; + // N.B. dfa.special doesn't have a way to do unchecked deserialization, + // so it has already been validated. + Ok((dfa, nread)) + } + + /// Deserialize a DFA with a specific state identifier representation in + /// constant time by omitting the verification of the validity of the + /// sparse transitions. + /// + /// This is just like [`DFA::from_bytes`], except it can potentially return + /// a DFA that exhibits undefined behavior if its transitions contains + /// invalid state identifiers. + /// + /// This routine is useful if you need to deserialize a DFA cheaply and + /// cannot afford the transition validation performed by `from_bytes`. + /// + /// # Safety + /// + /// This routine is not safe because it permits callers to provide + /// arbitrary transitions with possibly incorrect state identifiers. While + /// the various serialization routines will never return an incorrect + /// DFA, there is no guarantee that the bytes provided here are correct. + /// While `from_bytes_unchecked` will still do several forms of basic + /// validation, this routine does not check that the transitions themselves + /// are correct. Given an incorrect transition table, it is possible for + /// the search routines to access out-of-bounds memory because of explicit + /// bounds check elision. + /// + /// # Example + /// + /// ``` + /// use regex_automata::{dfa::{Automaton, sparse::DFA}, HalfMatch, Input}; + /// + /// let initial = DFA::new("foo[0-9]+")?; + /// let bytes = initial.to_bytes_native_endian(); + /// // SAFETY: This is guaranteed to be safe since the bytes given come + /// // directly from a compatible serialization routine. + /// let dfa: DFA<&[u8]> = unsafe { DFA::from_bytes_unchecked(&bytes)?.0 }; + /// + /// let expected = Some(HalfMatch::must(0, 8)); + /// assert_eq!(expected, dfa.try_search_fwd(&Input::new("foo12345"))?); + /// # Ok::<(), Box<dyn std::error::Error>>(()) + /// ``` + pub unsafe fn from_bytes_unchecked( + slice: &'a [u8], + ) -> Result<(DFA<&'a [u8]>, usize), DeserializeError> { + let mut nr = 0; + + nr += wire::read_label(&slice[nr..], LABEL)?; + nr += wire::read_endianness_check(&slice[nr..])?; + nr += wire::read_version(&slice[nr..], VERSION)?; + + let _unused = wire::try_read_u32(&slice[nr..], "unused space")?; + nr += size_of::<u32>(); + + let (flags, nread) = Flags::from_bytes(&slice[nr..])?; + nr += nread; + + let (tt, nread) = Transitions::from_bytes_unchecked(&slice[nr..])?; + nr += nread; + + let (st, nread) = StartTable::from_bytes_unchecked(&slice[nr..])?; + nr += nread; + + let (special, nread) = Special::from_bytes(&slice[nr..])?; + nr += nread; + if special.max.as_usize() >= tt.sparse().len() { + return Err(DeserializeError::generic( + "max should not be greater than or equal to sparse bytes", + )); + } + + let (quitset, nread) = ByteSet::from_bytes(&slice[nr..])?; + nr += nread; + + // Prefilters don't support serialization, so they're always absent. + let pre = None; + Ok((DFA { tt, st, special, pre, quitset, flags }, nr)) + } +} + +impl<T: AsRef<[u8]>> fmt::Debug for DFA<T> { + fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result { + writeln!(f, "sparse::DFA(")?; + for state in self.tt.states() { + fmt_state_indicator(f, self, state.id())?; + writeln!(f, "{:06?}: {:?}", state.id().as_usize(), state)?; + } + writeln!(f, "")?; + for (i, (start_id, anchored, sty)) in self.st.iter().enumerate() { + if i % self.st.stride == 0 { + match anchored { + Anchored::No => writeln!(f, "START-GROUP(unanchored)")?, + Anchored::Yes => writeln!(f, "START-GROUP(anchored)")?, + Anchored::Pattern(pid) => writeln!( + f, + "START_GROUP(pattern: {:?})", + pid.as_usize() + )?, + } + } + writeln!(f, " {:?} => {:06?}", sty, start_id.as_usize())?; + } + writeln!(f, "state length: {:?}", self.tt.state_len)?; + writeln!(f, "pattern length: {:?}", self.pattern_len())?; + writeln!(f, "flags: {:?}", self.flags)?; + writeln!(f, ")")?; + Ok(()) + } +} + +// SAFETY: We assert that our implementation of each method is correct. +unsafe impl<T: AsRef<[u8]>> Automaton for DFA<T> { + #[inline] + fn is_special_state(&self, id: StateID) -> bool { + self.special.is_special_state(id) + } + + #[inline] + fn is_dead_state(&self, id: StateID) -> bool { + self.special.is_dead_state(id) + } + + #[inline] + fn is_quit_state(&self, id: StateID) -> bool { + self.special.is_quit_state(id) + } + + #[inline] + fn is_match_state(&self, id: StateID) -> bool { + self.special.is_match_state(id) + } + + #[inline] + fn is_start_state(&self, id: StateID) -> bool { + self.special.is_start_state(id) + } + + #[inline] + fn is_accel_state(&self, id: StateID) -> bool { + self.special.is_accel_state(id) + } + + // This is marked as inline to help dramatically boost sparse searching, + // which decodes each state it enters to follow the next transition. + #[cfg_attr(feature = "perf-inline", inline(always))] + fn next_state(&self, current: StateID, input: u8) -> StateID { + let input = self.tt.classes.get(input); + self.tt.state(current).next(input) + } + + #[inline] + unsafe fn next_state_unchecked( + &self, + current: StateID, + input: u8, + ) -> StateID { + self.next_state(current, input) + } + + #[inline] + fn next_eoi_state(&self, current: StateID) -> StateID { + self.tt.state(current).next_eoi() + } + + #[inline] + fn pattern_len(&self) -> usize { + self.tt.pattern_len + } + + #[inline] + fn match_len(&self, id: StateID) -> usize { + self.tt.state(id).pattern_len() + } + + #[inline] + fn match_pattern(&self, id: StateID, match_index: usize) -> PatternID { + // This is an optimization for the very common case of a DFA with a + // single pattern. This conditional avoids a somewhat more costly path + // that finds the pattern ID from the state machine, which requires + // a bit of slicing/pointer-chasing. This optimization tends to only + // matter when matches are frequent. + if self.tt.pattern_len == 1 { + return PatternID::ZERO; + } + self.tt.state(id).pattern_id(match_index) + } + + #[inline] + fn has_empty(&self) -> bool { + self.flags.has_empty + } + + #[inline] + fn is_utf8(&self) -> bool { + self.flags.is_utf8 + } + + #[inline] + fn is_always_start_anchored(&self) -> bool { + self.flags.is_always_start_anchored + } + + #[inline] + fn start_state( + &self, + config: &start::Config, + ) -> Result<StateID, StartError> { + let anchored = config.get_anchored(); + let start = match config.get_look_behind() { + None => Start::Text, + Some(byte) => { + if !self.quitset.is_empty() && self.quitset.contains(byte) { + return Err(StartError::quit(byte)); + } + self.st.start_map.get(byte) + } + }; + self.st.start(anchored, start) + } + + #[inline] + fn universal_start_state(&self, mode: Anchored) -> Option<StateID> { + match mode { + Anchored::No => self.st.universal_start_unanchored, + Anchored::Yes => self.st.universal_start_anchored, + Anchored::Pattern(_) => None, + } + } + + #[inline] + fn accelerator(&self, id: StateID) -> &[u8] { + self.tt.state(id).accelerator() + } + + #[inline] + fn get_prefilter(&self) -> Option<&Prefilter> { + self.pre.as_ref() + } +} + +/// The transition table portion of a sparse DFA. +/// +/// The transition table is the core part of the DFA in that it describes how +/// to move from one state to another based on the input sequence observed. +/// +/// Unlike a typical dense table based DFA, states in a sparse transition +/// table have variable size. That is, states with more transitions use more +/// space than states with fewer transitions. This means that finding the next +/// transition takes more work than with a dense DFA, but also typically uses +/// much less space. +#[derive(Clone)] +struct Transitions<T> { + /// The raw encoding of each state in this DFA. + /// + /// Each state has the following information: + /// + /// * A set of transitions to subsequent states. Transitions to the dead + /// state are omitted. + /// * If the state can be accelerated, then any additional accelerator + /// information. + /// * If the state is a match state, then the state contains all pattern + /// IDs that match when in that state. + /// + /// To decode a state, use Transitions::state. + /// + /// In practice, T is either Vec<u8> or &[u8]. + sparse: T, + /// A set of equivalence classes, where a single equivalence class + /// represents a set of bytes that never discriminate between a match + /// and a non-match in the DFA. Each equivalence class corresponds to a + /// single character in this DFA's alphabet, where the maximum number of + /// characters is 257 (each possible value of a byte plus the special + /// EOI transition). Consequently, the number of equivalence classes + /// corresponds to the number of transitions for each DFA state. Note + /// though that the *space* used by each DFA state in the transition table + /// may be larger. The total space used by each DFA state is known as the + /// stride and is documented above. + /// + /// The only time the number of equivalence classes is fewer than 257 is + /// if the DFA's kind uses byte classes which is the default. Equivalence + /// classes should generally only be disabled when debugging, so that + /// the transitions themselves aren't obscured. Disabling them has no + /// other benefit, since the equivalence class map is always used while + /// searching. In the vast majority of cases, the number of equivalence + /// classes is substantially smaller than 257, particularly when large + /// Unicode classes aren't used. + /// + /// N.B. Equivalence classes aren't particularly useful in a sparse DFA + /// in the current implementation, since equivalence classes generally tend + /// to correspond to continuous ranges of bytes that map to the same + /// transition. So in a sparse DFA, equivalence classes don't really lead + /// to a space savings. In the future, it would be good to try and remove + /// them from sparse DFAs entirely, but requires a bit of work since sparse + /// DFAs are built from dense DFAs, which are in turn built on top of + /// equivalence classes. + classes: ByteClasses, + /// The total number of states in this DFA. Note that a DFA always has at + /// least one state---the dead state---even the empty DFA. In particular, + /// the dead state always has ID 0 and is correspondingly always the first + /// state. The dead state is never a match state. + state_len: usize, + /// The total number of unique patterns represented by these match states. + pattern_len: usize, +} + +impl<'a> Transitions<&'a [u8]> { + unsafe fn from_bytes_unchecked( + mut slice: &'a [u8], + ) -> Result<(Transitions<&'a [u8]>, usize), DeserializeError> { + let slice_start = slice.as_ptr().as_usize(); + + let (state_len, nr) = + wire::try_read_u32_as_usize(&slice, "state length")?; + slice = &slice[nr..]; + + let (pattern_len, nr) = + wire::try_read_u32_as_usize(&slice, "pattern length")?; + slice = &slice[nr..]; + + let (classes, nr) = ByteClasses::from_bytes(&slice)?; + slice = &slice[nr..]; + + let (len, nr) = + wire::try_read_u32_as_usize(&slice, "sparse transitions length")?; + slice = &slice[nr..]; + + wire::check_slice_len(slice, len, "sparse states byte length")?; + let sparse = &slice[..len]; + slice = &slice[len..]; + + let trans = Transitions { sparse, classes, state_len, pattern_len }; + Ok((trans, slice.as_ptr().as_usize() - slice_start)) + } +} + +impl<T: AsRef<[u8]>> Transitions<T> { + /// Writes a serialized form of this transition table to the buffer given. + /// If the buffer is too small, then an error is returned. To determine + /// how big the buffer must be, use `write_to_len`. + fn write_to<E: Endian>( + &self, + mut dst: &mut [u8], + ) -> Result<usize, SerializeError> { + let nwrite = self.write_to_len(); + if dst.len() < nwrite { + return Err(SerializeError::buffer_too_small( + "sparse transition table", + )); + } + dst = &mut dst[..nwrite]; + + // write state length + E::write_u32(u32::try_from(self.state_len).unwrap(), dst); + dst = &mut dst[size_of::<u32>()..]; + + // write pattern length + E::write_u32(u32::try_from(self.pattern_len).unwrap(), dst); + dst = &mut dst[size_of::<u32>()..]; + + // write byte class map + let n = self.classes.write_to(dst)?; + dst = &mut dst[n..]; + + // write number of bytes in sparse transitions + E::write_u32(u32::try_from(self.sparse().len()).unwrap(), dst); + dst = &mut dst[size_of::<u32>()..]; + + // write actual transitions + let mut id = DEAD; + while id.as_usize() < self.sparse().len() { + let state = self.state(id); + let n = state.write_to::<E>(&mut dst)?; + dst = &mut dst[n..]; + // The next ID is the offset immediately following `state`. + id = StateID::new(id.as_usize() + state.write_to_len()).unwrap(); + } + Ok(nwrite) + } + + /// Returns the number of bytes the serialized form of this transition + /// table will use. + fn write_to_len(&self) -> usize { + size_of::<u32>() // state length + + size_of::<u32>() // pattern length + + self.classes.write_to_len() + + size_of::<u32>() // sparse transitions length + + self.sparse().len() + } + + /// Validates that every state ID in this transition table is valid. + /// + /// That is, every state ID can be used to correctly index a state in this + /// table. + fn validate(&self, sp: &Special) -> Result<Seen, DeserializeError> { + let mut verified = Seen::new(); + // We need to make sure that we decode the correct number of states. + // Otherwise, an empty set of transitions would validate even if the + // recorded state length is non-empty. + let mut len = 0; + // We can't use the self.states() iterator because it assumes the state + // encodings are valid. It could panic if they aren't. + let mut id = DEAD; + while id.as_usize() < self.sparse().len() { + // Before we even decode the state, we check that the ID itself + // is well formed. That is, if it's a special state then it must + // actually be a quit, dead, accel, match or start state. + if sp.is_special_state(id) { + let is_actually_special = sp.is_dead_state(id) + || sp.is_quit_state(id) + || sp.is_match_state(id) + || sp.is_start_state(id) + || sp.is_accel_state(id); + if !is_actually_special { + // This is kind of a cryptic error message... + return Err(DeserializeError::generic( + "found sparse state tagged as special but \ + wasn't actually special", + )); + } + } + let state = self.try_state(sp, id)?; + verified.insert(id); + // The next ID should be the offset immediately following `state`. + id = StateID::new(wire::add( + id.as_usize(), + state.write_to_len(), + "next state ID offset", + )?) + .map_err(|err| { + DeserializeError::state_id_error(err, "next state ID offset") + })?; + len += 1; + } + // Now that we've checked that all top-level states are correct and + // importantly, collected a set of valid state IDs, we have all the + // information we need to check that all transitions are correct too. + // + // Note that we can't use `valid_ids` to iterate because it will + // be empty in no-std no-alloc contexts. (And yes, that means our + // verification isn't quite as good.) We can use `self.states()` + // though at least, since we know that all states can at least be + // decoded and traversed correctly. + for state in self.states() { + // Check that all transitions in this state are correct. + for i in 0..state.ntrans { + let to = state.next_at(i); + // For no-alloc, we just check that the state can decode. It is + // technically possible that the state ID could still point to + // a non-existent state even if it decodes (fuzzing proved this + // to be true), but it shouldn't result in any memory unsafety + // or panics in non-debug mode. + #[cfg(not(feature = "alloc"))] + { + let _ = self.try_state(sp, to)?; + } + #[cfg(feature = "alloc")] + { + if !verified.contains(&to) { + return Err(DeserializeError::generic( + "found transition that points to a \ + non-existent state", + )); + } + } + } + } + if len != self.state_len { + return Err(DeserializeError::generic( + "mismatching sparse state length", + )); + } + Ok(verified) + } + + /// Converts these transitions to a borrowed value. + fn as_ref(&self) -> Transitions<&'_ [u8]> { + Transitions { + sparse: self.sparse(), + classes: self.classes.clone(), + state_len: self.state_len, + pattern_len: self.pattern_len, + } + } + + /// Converts these transitions to an owned value. + #[cfg(feature = "alloc")] + fn to_owned(&self) -> Transitions<alloc::vec::Vec<u8>> { + Transitions { + sparse: self.sparse().to_vec(), + classes: self.classes.clone(), + state_len: self.state_len, + pattern_len: self.pattern_len, + } + } + + /// Return a convenient representation of the given state. + /// + /// This panics if the state is invalid. + /// + /// This is marked as inline to help dramatically boost sparse searching, + /// which decodes each state it enters to follow the next transition. Other + /// functions involved are also inlined, which should hopefully eliminate + /// a lot of the extraneous decoding that is never needed just to follow + /// the next transition. + #[cfg_attr(feature = "perf-inline", inline(always))] + fn state(&self, id: StateID) -> State<'_> { + let mut state = &self.sparse()[id.as_usize()..]; + let mut ntrans = wire::read_u16(&state).as_usize(); + let is_match = (1 << 15) & ntrans != 0; + ntrans &= !(1 << 15); + state = &state[2..]; + + let (input_ranges, state) = state.split_at(ntrans * 2); + let (next, state) = state.split_at(ntrans * StateID::SIZE); + let (pattern_ids, state) = if is_match { + let npats = wire::read_u32(&state).as_usize(); + state[4..].split_at(npats * 4) + } else { + (&[][..], state) + }; + + let accel_len = usize::from(state[0]); + let accel = &state[1..accel_len + 1]; + State { id, is_match, ntrans, input_ranges, next, pattern_ids, accel } + } + + /// Like `state`, but will return an error if the state encoding is + /// invalid. This is useful for verifying states after deserialization, + /// which is required for a safe deserialization API. + /// + /// Note that this only verifies that this state is decodable and that + /// all of its data is consistent. It does not verify that its state ID + /// transitions point to valid states themselves, nor does it verify that + /// every pattern ID is valid. + fn try_state( + &self, + sp: &Special, + id: StateID, + ) -> Result<State<'_>, DeserializeError> { + if id.as_usize() > self.sparse().len() { + return Err(DeserializeError::generic( + "invalid caller provided sparse state ID", + )); + } + let mut state = &self.sparse()[id.as_usize()..]; + // Encoding format starts with a u16 that stores the total number of + // transitions in this state. + let (mut ntrans, _) = + wire::try_read_u16_as_usize(state, "state transition length")?; + let is_match = ((1 << 15) & ntrans) != 0; + ntrans &= !(1 << 15); + state = &state[2..]; + if ntrans > 257 || ntrans == 0 { + return Err(DeserializeError::generic( + "invalid transition length", + )); + } + if is_match && !sp.is_match_state(id) { + return Err(DeserializeError::generic( + "state marked as match but not in match ID range", + )); + } else if !is_match && sp.is_match_state(id) { + return Err(DeserializeError::generic( + "state in match ID range but not marked as match state", + )); + } + + // Each transition has two pieces: an inclusive range of bytes on which + // it is defined, and the state ID that those bytes transition to. The + // pairs come first, followed by a corresponding sequence of state IDs. + let input_ranges_len = ntrans.checked_mul(2).unwrap(); + wire::check_slice_len(state, input_ranges_len, "sparse byte pairs")?; + let (input_ranges, state) = state.split_at(input_ranges_len); + // Every range should be of the form A-B, where A<=B. + for pair in input_ranges.chunks(2) { + let (start, end) = (pair[0], pair[1]); + if start > end { + return Err(DeserializeError::generic("invalid input range")); + } + } + + // And now extract the corresponding sequence of state IDs. We leave + // this sequence as a &[u8] instead of a &[S] because sparse DFAs do + // not have any alignment requirements. + let next_len = ntrans + .checked_mul(self.id_len()) + .expect("state size * #trans should always fit in a usize"); + wire::check_slice_len(state, next_len, "sparse trans state IDs")?; + let (next, state) = state.split_at(next_len); + // We can at least verify that every state ID is in bounds. + for idbytes in next.chunks(self.id_len()) { + let (id, _) = + wire::read_state_id(idbytes, "sparse state ID in try_state")?; + wire::check_slice_len( + self.sparse(), + id.as_usize(), + "invalid sparse state ID", + )?; + } + + // If this is a match state, then read the pattern IDs for this state. + // Pattern IDs is a u32-length prefixed sequence of native endian + // encoded 32-bit integers. + let (pattern_ids, state) = if is_match { + let (npats, nr) = + wire::try_read_u32_as_usize(state, "pattern ID length")?; + let state = &state[nr..]; + if npats == 0 { + return Err(DeserializeError::generic( + "state marked as a match, but pattern length is zero", + )); + } + + let pattern_ids_len = + wire::mul(npats, 4, "sparse pattern ID byte length")?; + wire::check_slice_len( + state, + pattern_ids_len, + "sparse pattern IDs", + )?; + let (pattern_ids, state) = state.split_at(pattern_ids_len); + for patbytes in pattern_ids.chunks(PatternID::SIZE) { + wire::read_pattern_id( + patbytes, + "sparse pattern ID in try_state", + )?; + } + (pattern_ids, state) + } else { + (&[][..], state) + }; + if is_match && pattern_ids.is_empty() { + return Err(DeserializeError::generic( + "state marked as a match, but has no pattern IDs", + )); + } + if sp.is_match_state(id) && pattern_ids.is_empty() { + return Err(DeserializeError::generic( + "state marked special as a match, but has no pattern IDs", + )); + } + if sp.is_match_state(id) != is_match { + return Err(DeserializeError::generic( + "whether state is a match or not is inconsistent", + )); + } + + // Now read this state's accelerator info. The first byte is the length + // of the accelerator, which is typically 0 (for no acceleration) but + // is no bigger than 3. The length indicates the number of bytes that + // follow, where each byte corresponds to a transition out of this + // state. + if state.is_empty() { + return Err(DeserializeError::generic("no accelerator length")); + } + let (accel_len, state) = (usize::from(state[0]), &state[1..]); + + if accel_len > 3 { + return Err(DeserializeError::generic( + "sparse invalid accelerator length", + )); + } else if accel_len == 0 && sp.is_accel_state(id) { + return Err(DeserializeError::generic( + "got no accelerators in state, but in accelerator ID range", + )); + } else if accel_len > 0 && !sp.is_accel_state(id) { + return Err(DeserializeError::generic( + "state in accelerator ID range, but has no accelerators", + )); + } + + wire::check_slice_len( + state, + accel_len, + "sparse corrupt accelerator length", + )?; + let (accel, _) = (&state[..accel_len], &state[accel_len..]); + + let state = State { + id, + is_match, + ntrans, + input_ranges, + next, + pattern_ids, + accel, + }; + if sp.is_quit_state(state.next_at(state.ntrans - 1)) { + return Err(DeserializeError::generic( + "state with EOI transition to quit state is illegal", + )); + } + Ok(state) + } + + /// Return an iterator over all of the states in this DFA. + /// + /// The iterator returned yields tuples, where the first element is the + /// state ID and the second element is the state itself. + fn states(&self) -> StateIter<'_, T> { + StateIter { trans: self, id: DEAD.as_usize() } + } + + /// Returns the sparse transitions as raw bytes. + fn sparse(&self) -> &[u8] { + self.sparse.as_ref() + } + + /// Returns the number of bytes represented by a single state ID. + fn id_len(&self) -> usize { + StateID::SIZE + } + + /// Return the memory usage, in bytes, of these transitions. + /// + /// This does not include the size of a `Transitions` value itself. + fn memory_usage(&self) -> usize { + self.sparse().len() + } +} + +#[cfg(feature = "dfa-build")] +impl<T: AsMut<[u8]>> Transitions<T> { + /// Return a convenient mutable representation of the given state. + /// This panics if the state is invalid. + fn state_mut(&mut self, id: StateID) -> StateMut<'_> { + let mut state = &mut self.sparse_mut()[id.as_usize()..]; + let mut ntrans = wire::read_u16(&state).as_usize(); + let is_match = (1 << 15) & ntrans != 0; + ntrans &= !(1 << 15); + state = &mut state[2..]; + + let (input_ranges, state) = state.split_at_mut(ntrans * 2); + let (next, state) = state.split_at_mut(ntrans * StateID::SIZE); + let (pattern_ids, state) = if is_match { + let npats = wire::read_u32(&state).as_usize(); + state[4..].split_at_mut(npats * 4) + } else { + (&mut [][..], state) + }; + + let accel_len = usize::from(state[0]); + let accel = &mut state[1..accel_len + 1]; + StateMut { + id, + is_match, + ntrans, + input_ranges, + next, + pattern_ids, + accel, + } + } + + /// Returns the sparse transitions as raw mutable bytes. + fn sparse_mut(&mut self) -> &mut [u8] { + self.sparse.as_mut() + } +} + +/// The set of all possible starting states in a DFA. +/// +/// See the eponymous type in the `dense` module for more details. This type +/// is very similar to `dense::StartTable`, except that its underlying +/// representation is `&[u8]` instead of `&[S]`. (The latter would require +/// sparse DFAs to be aligned, which is explicitly something we do not require +/// because we don't really need it.) +#[derive(Clone)] +struct StartTable<T> { + /// The initial start state IDs as a contiguous table of native endian + /// encoded integers, represented by `S`. + /// + /// In practice, T is either Vec<u8> or &[u8] and has no alignment + /// requirements. + /// + /// The first `2 * stride` (currently always 8) entries always correspond + /// to the starts states for the entire DFA, with the first 4 entries being + /// for unanchored searches and the second 4 entries being for anchored + /// searches. To keep things simple, we always use 8 entries even if the + /// `StartKind` is not both. + /// + /// After that, there are `stride * patterns` state IDs, where `patterns` + /// may be zero in the case of a DFA with no patterns or in the case where + /// the DFA was built without enabling starting states for each pattern. + table: T, + /// The starting state configuration supported. When 'both', both + /// unanchored and anchored searches work. When 'unanchored', anchored + /// searches panic. When 'anchored', unanchored searches panic. + kind: StartKind, + /// The start state configuration for every possible byte. + start_map: StartByteMap, + /// The number of starting state IDs per pattern. + stride: usize, + /// The total number of patterns for which starting states are encoded. + /// This is `None` for DFAs that were built without start states for each + /// pattern. Thus, one cannot use this field to say how many patterns + /// are in the DFA in all cases. It is specific to how many patterns are + /// represented in this start table. + pattern_len: Option<usize>, + /// The universal starting state for unanchored searches. This is only + /// present when the DFA supports unanchored searches and when all starting + /// state IDs for an unanchored search are equivalent. + universal_start_unanchored: Option<StateID>, + /// The universal starting state for anchored searches. This is only + /// present when the DFA supports anchored searches and when all starting + /// state IDs for an anchored search are equivalent. + universal_start_anchored: Option<StateID>, +} + +#[cfg(feature = "dfa-build")] +impl StartTable<Vec<u8>> { + fn new<T: AsRef<[u32]>>( + dfa: &dense::DFA<T>, + pattern_len: Option<usize>, + ) -> StartTable<Vec<u8>> { + let stride = Start::len(); + // This is OK since the only way we're here is if a dense DFA could be + // constructed successfully, which uses the same space. + let len = stride + .checked_mul(pattern_len.unwrap_or(0)) + .unwrap() + .checked_add(stride.checked_mul(2).unwrap()) + .unwrap() + .checked_mul(StateID::SIZE) + .unwrap(); + StartTable { + table: vec![0; len], + kind: dfa.start_kind(), + start_map: dfa.start_map().clone(), + stride, + pattern_len, + universal_start_unanchored: dfa + .universal_start_state(Anchored::No), + universal_start_anchored: dfa.universal_start_state(Anchored::Yes), + } + } + + fn from_dense_dfa<T: AsRef<[u32]>>( + dfa: &dense::DFA<T>, + remap: &[StateID], + ) -> Result<StartTable<Vec<u8>>, BuildError> { + // Unless the DFA has start states compiled for each pattern, then + // as far as the starting state table is concerned, there are zero + // patterns to account for. It will instead only store starting states + // for the entire DFA. + let start_pattern_len = if dfa.starts_for_each_pattern() { + Some(dfa.pattern_len()) + } else { + None + }; + let mut sl = StartTable::new(dfa, start_pattern_len); + for (old_start_id, anchored, sty) in dfa.starts() { + let new_start_id = remap[dfa.to_index(old_start_id)]; + sl.set_start(anchored, sty, new_start_id); + } + Ok(sl) + } +} + +impl<'a> StartTable<&'a [u8]> { + unsafe fn from_bytes_unchecked( + mut slice: &'a [u8], + ) -> Result<(StartTable<&'a [u8]>, usize), DeserializeError> { + let slice_start = slice.as_ptr().as_usize(); + + let (kind, nr) = StartKind::from_bytes(slice)?; + slice = &slice[nr..]; + + let (start_map, nr) = StartByteMap::from_bytes(slice)?; + slice = &slice[nr..]; + + let (stride, nr) = + wire::try_read_u32_as_usize(slice, "sparse start table stride")?; + slice = &slice[nr..]; + if stride != Start::len() { + return Err(DeserializeError::generic( + "invalid sparse starting table stride", + )); + } + + let (maybe_pattern_len, nr) = + wire::try_read_u32_as_usize(slice, "sparse start table patterns")?; + slice = &slice[nr..]; + let pattern_len = if maybe_pattern_len.as_u32() == u32::MAX { + None + } else { + Some(maybe_pattern_len) + }; + if pattern_len.map_or(false, |len| len > PatternID::LIMIT) { + return Err(DeserializeError::generic( + "sparse invalid number of patterns", + )); + } + + let (universal_unanchored, nr) = + wire::try_read_u32(slice, "universal unanchored start")?; + slice = &slice[nr..]; + let universal_start_unanchored = if universal_unanchored == u32::MAX { + None + } else { + Some(StateID::try_from(universal_unanchored).map_err(|e| { + DeserializeError::state_id_error( + e, + "universal unanchored start", + ) + })?) + }; + + let (universal_anchored, nr) = + wire::try_read_u32(slice, "universal anchored start")?; + slice = &slice[nr..]; + let universal_start_anchored = if universal_anchored == u32::MAX { + None + } else { + Some(StateID::try_from(universal_anchored).map_err(|e| { + DeserializeError::state_id_error(e, "universal anchored start") + })?) + }; + + let pattern_table_size = wire::mul( + stride, + pattern_len.unwrap_or(0), + "sparse invalid pattern length", + )?; + // Our start states always start with a single stride of start states + // for the entire automaton which permit it to match any pattern. What + // follows it are an optional set of start states for each pattern. + let start_state_len = wire::add( + wire::mul(2, stride, "start state stride too big")?, + pattern_table_size, + "sparse invalid 'any' pattern starts size", + )?; + let table_bytes_len = wire::mul( + start_state_len, + StateID::SIZE, + "sparse pattern table bytes length", + )?; + wire::check_slice_len( + slice, + table_bytes_len, + "sparse start ID table", + )?; + let table = &slice[..table_bytes_len]; + slice = &slice[table_bytes_len..]; + + let sl = StartTable { + table, + kind, + start_map, + stride, + pattern_len, + universal_start_unanchored, + universal_start_anchored, + }; + Ok((sl, slice.as_ptr().as_usize() - slice_start)) + } +} + +impl<T: AsRef<[u8]>> StartTable<T> { + fn write_to<E: Endian>( + &self, + mut dst: &mut [u8], + ) -> Result<usize, SerializeError> { + let nwrite = self.write_to_len(); + if dst.len() < nwrite { + return Err(SerializeError::buffer_too_small( + "sparse starting table ids", + )); + } + dst = &mut dst[..nwrite]; + + // write start kind + let nw = self.kind.write_to::<E>(dst)?; + dst = &mut dst[nw..]; + // write start byte map + let nw = self.start_map.write_to(dst)?; + dst = &mut dst[nw..]; + // write stride + E::write_u32(u32::try_from(self.stride).unwrap(), dst); + dst = &mut dst[size_of::<u32>()..]; + // write pattern length + E::write_u32( + u32::try_from(self.pattern_len.unwrap_or(0xFFFF_FFFF)).unwrap(), + dst, + ); + dst = &mut dst[size_of::<u32>()..]; + // write universal start unanchored state id, u32::MAX if absent + E::write_u32( + self.universal_start_unanchored + .map_or(u32::MAX, |sid| sid.as_u32()), + dst, + ); + dst = &mut dst[size_of::<u32>()..]; + // write universal start anchored state id, u32::MAX if absent + E::write_u32( + self.universal_start_anchored.map_or(u32::MAX, |sid| sid.as_u32()), + dst, + ); + dst = &mut dst[size_of::<u32>()..]; + // write start IDs + for (sid, _, _) in self.iter() { + E::write_u32(sid.as_u32(), dst); + dst = &mut dst[StateID::SIZE..]; + } + Ok(nwrite) + } + + /// Returns the number of bytes the serialized form of this transition + /// table will use. + fn write_to_len(&self) -> usize { + self.kind.write_to_len() + + self.start_map.write_to_len() + + size_of::<u32>() // stride + + size_of::<u32>() // # patterns + + size_of::<u32>() // universal unanchored start + + size_of::<u32>() // universal anchored start + + self.table().len() + } + + /// Validates that every starting state ID in this table is valid. + /// + /// That is, every starting state ID can be used to correctly decode a + /// state in the DFA's sparse transitions. + fn validate( + &self, + sp: &Special, + seen: &Seen, + ) -> Result<(), DeserializeError> { + for (id, _, _) in self.iter() { + if !seen.contains(&id) { + return Err(DeserializeError::generic( + "found invalid start state ID", + )); + } + if sp.is_match_state(id) { + return Err(DeserializeError::generic( + "start states cannot be match states", + )); + } + } + Ok(()) + } + + /// Converts this start list to a borrowed value. + fn as_ref(&self) -> StartTable<&'_ [u8]> { + StartTable { + table: self.table(), + kind: self.kind, + start_map: self.start_map.clone(), + stride: self.stride, + pattern_len: self.pattern_len, + universal_start_unanchored: self.universal_start_unanchored, + universal_start_anchored: self.universal_start_anchored, + } + } + + /// Converts this start list to an owned value. + #[cfg(feature = "alloc")] + fn to_owned(&self) -> StartTable<alloc::vec::Vec<u8>> { + StartTable { + table: self.table().to_vec(), + kind: self.kind, + start_map: self.start_map.clone(), + stride: self.stride, + pattern_len: self.pattern_len, + universal_start_unanchored: self.universal_start_unanchored, + universal_start_anchored: self.universal_start_anchored, + } + } + + /// Return the start state for the given index and pattern ID. If the + /// pattern ID is None, then the corresponding start state for the entire + /// DFA is returned. If the pattern ID is not None, then the corresponding + /// starting state for the given pattern is returned. If this start table + /// does not have individual starting states for each pattern, then this + /// panics. + fn start( + &self, + anchored: Anchored, + start: Start, + ) -> Result<StateID, StartError> { + let start_index = start.as_usize(); + let index = match anchored { + Anchored::No => { + if !self.kind.has_unanchored() { + return Err(StartError::unsupported_anchored(anchored)); + } + start_index + } + Anchored::Yes => { + if !self.kind.has_anchored() { + return Err(StartError::unsupported_anchored(anchored)); + } + self.stride + start_index + } + Anchored::Pattern(pid) => { + let len = match self.pattern_len { + None => { + return Err(StartError::unsupported_anchored(anchored)) + } + Some(len) => len, + }; + if pid.as_usize() >= len { + return Ok(DEAD); + } + (2 * self.stride) + + (self.stride * pid.as_usize()) + + start_index + } + }; + let start = index * StateID::SIZE; + // This OK since we're allowed to assume that the start table contains + // valid StateIDs. + Ok(wire::read_state_id_unchecked(&self.table()[start..]).0) + } + + /// Return an iterator over all start IDs in this table. + fn iter(&self) -> StartStateIter<'_, T> { + StartStateIter { st: self, i: 0 } + } + + /// Returns the total number of start state IDs in this table. + fn len(&self) -> usize { + self.table().len() / StateID::SIZE + } + + /// Returns the table as a raw slice of bytes. + fn table(&self) -> &[u8] { + self.table.as_ref() + } + + /// Return the memory usage, in bytes, of this start list. + /// + /// This does not include the size of a `StartTable` value itself. + fn memory_usage(&self) -> usize { + self.table().len() + } +} + +#[cfg(feature = "dfa-build")] +impl<T: AsMut<[u8]>> StartTable<T> { + /// Set the start state for the given index and pattern. + /// + /// If the pattern ID or state ID are not valid, then this will panic. + fn set_start(&mut self, anchored: Anchored, start: Start, id: StateID) { + let start_index = start.as_usize(); + let index = match anchored { + Anchored::No => start_index, + Anchored::Yes => self.stride + start_index, + Anchored::Pattern(pid) => { + let pid = pid.as_usize(); + let len = self + .pattern_len + .expect("start states for each pattern enabled"); + assert!(pid < len, "invalid pattern ID {:?}", pid); + self.stride + .checked_mul(pid) + .unwrap() + .checked_add(self.stride.checked_mul(2).unwrap()) + .unwrap() + .checked_add(start_index) + .unwrap() + } + }; + let start = index * StateID::SIZE; + let end = start + StateID::SIZE; + wire::write_state_id::<wire::NE>( + id, + &mut self.table.as_mut()[start..end], + ); + } +} + +/// An iterator over all state state IDs in a sparse DFA. +struct StartStateIter<'a, T> { + st: &'a StartTable<T>, + i: usize, +} + +impl<'a, T: AsRef<[u8]>> Iterator for StartStateIter<'a, T> { + type Item = (StateID, Anchored, Start); + + fn next(&mut self) -> Option<(StateID, Anchored, Start)> { + let i = self.i; + if i >= self.st.len() { + return None; + } + self.i += 1; + + // This unwrap is okay since the stride of any DFA must always match + // the number of start state types. + let start_type = Start::from_usize(i % self.st.stride).unwrap(); + let anchored = if i < self.st.stride { + Anchored::No + } else if i < (2 * self.st.stride) { + Anchored::Yes + } else { + let pid = (i - (2 * self.st.stride)) / self.st.stride; + Anchored::Pattern(PatternID::new(pid).unwrap()) + }; + let start = i * StateID::SIZE; + let end = start + StateID::SIZE; + let bytes = self.st.table()[start..end].try_into().unwrap(); + // This is OK since we're allowed to assume that any IDs in this start + // table are correct and valid for this DFA. + let id = StateID::from_ne_bytes_unchecked(bytes); + Some((id, anchored, start_type)) + } +} + +impl<'a, T> fmt::Debug for StartStateIter<'a, T> { + fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result { + f.debug_struct("StartStateIter").field("i", &self.i).finish() + } +} + +/// An iterator over all states in a sparse DFA. +/// +/// This iterator yields tuples, where the first element is the state ID and +/// the second element is the state itself. +struct StateIter<'a, T> { + trans: &'a Transitions<T>, + id: usize, +} + +impl<'a, T: AsRef<[u8]>> Iterator for StateIter<'a, T> { + type Item = State<'a>; + + fn next(&mut self) -> Option<State<'a>> { + if self.id >= self.trans.sparse().len() { + return None; + } + let state = self.trans.state(StateID::new_unchecked(self.id)); + self.id = self.id + state.write_to_len(); + Some(state) + } +} + +impl<'a, T> fmt::Debug for StateIter<'a, T> { + fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result { + f.debug_struct("StateIter").field("id", &self.id).finish() + } +} + +/// A representation of a sparse DFA state that can be cheaply materialized +/// from a state identifier. +#[derive(Clone)] +struct State<'a> { + /// The identifier of this state. + id: StateID, + /// Whether this is a match state or not. + is_match: bool, + /// The number of transitions in this state. + ntrans: usize, + /// Pairs of input ranges, where there is one pair for each transition. + /// Each pair specifies an inclusive start and end byte range for the + /// corresponding transition. + input_ranges: &'a [u8], + /// Transitions to the next state. This slice contains native endian + /// encoded state identifiers, with `S` as the representation. Thus, there + /// are `ntrans * size_of::<S>()` bytes in this slice. + next: &'a [u8], + /// If this is a match state, then this contains the pattern IDs that match + /// when the DFA is in this state. + /// + /// This is a contiguous sequence of 32-bit native endian encoded integers. + pattern_ids: &'a [u8], + /// An accelerator for this state, if present. If this state has no + /// accelerator, then this is an empty slice. When non-empty, this slice + /// has length at most 3 and corresponds to the exhaustive set of bytes + /// that must be seen in order to transition out of this state. + accel: &'a [u8], +} + +impl<'a> State<'a> { + /// Searches for the next transition given an input byte. If no such + /// transition could be found, then a dead state is returned. + /// + /// This is marked as inline to help dramatically boost sparse searching, + /// which decodes each state it enters to follow the next transition. + #[cfg_attr(feature = "perf-inline", inline(always))] + fn next(&self, input: u8) -> StateID { + // This straight linear search was observed to be much better than + // binary search on ASCII haystacks, likely because a binary search + // visits the ASCII case last but a linear search sees it first. A + // binary search does do a little better on non-ASCII haystacks, but + // not by much. There might be a better trade off lurking here. + for i in 0..(self.ntrans - 1) { + let (start, end) = self.range(i); + if start <= input && input <= end { + return self.next_at(i); + } + // We could bail early with an extra branch: if input < b1, then + // we know we'll never find a matching transition. Interestingly, + // this extra branch seems to not help performance, or will even + // hurt it. It's likely very dependent on the DFA itself and what + // is being searched. + } + DEAD + } + + /// Returns the next state ID for the special EOI transition. + fn next_eoi(&self) -> StateID { + self.next_at(self.ntrans - 1) + } + + /// Returns the identifier for this state. + fn id(&self) -> StateID { + self.id + } + + /// Returns the inclusive input byte range for the ith transition in this + /// state. + fn range(&self, i: usize) -> (u8, u8) { + (self.input_ranges[i * 2], self.input_ranges[i * 2 + 1]) + } + + /// Returns the next state for the ith transition in this state. + fn next_at(&self, i: usize) -> StateID { + let start = i * StateID::SIZE; + let end = start + StateID::SIZE; + let bytes = self.next[start..end].try_into().unwrap(); + StateID::from_ne_bytes_unchecked(bytes) + } + + /// Returns the pattern ID for the given match index. If the match index + /// is invalid, then this panics. + fn pattern_id(&self, match_index: usize) -> PatternID { + let start = match_index * PatternID::SIZE; + wire::read_pattern_id_unchecked(&self.pattern_ids[start..]).0 + } + + /// Returns the total number of pattern IDs for this state. This is always + /// zero when `is_match` is false. + fn pattern_len(&self) -> usize { + assert_eq!(0, self.pattern_ids.len() % 4); + self.pattern_ids.len() / 4 + } + + /// Return an accelerator for this state. + fn accelerator(&self) -> &'a [u8] { + self.accel + } + + /// Write the raw representation of this state to the given buffer using + /// the given endianness. + fn write_to<E: Endian>( + &self, + mut dst: &mut [u8], + ) -> Result<usize, SerializeError> { + let nwrite = self.write_to_len(); + if dst.len() < nwrite { + return Err(SerializeError::buffer_too_small( + "sparse state transitions", + )); + } + + let ntrans = + if self.is_match { self.ntrans | (1 << 15) } else { self.ntrans }; + E::write_u16(u16::try_from(ntrans).unwrap(), dst); + dst = &mut dst[size_of::<u16>()..]; + + dst[..self.input_ranges.len()].copy_from_slice(self.input_ranges); + dst = &mut dst[self.input_ranges.len()..]; + + for i in 0..self.ntrans { + E::write_u32(self.next_at(i).as_u32(), dst); + dst = &mut dst[StateID::SIZE..]; + } + + if self.is_match { + E::write_u32(u32::try_from(self.pattern_len()).unwrap(), dst); + dst = &mut dst[size_of::<u32>()..]; + for i in 0..self.pattern_len() { + let pid = self.pattern_id(i); + E::write_u32(pid.as_u32(), dst); + dst = &mut dst[PatternID::SIZE..]; + } + } + + dst[0] = u8::try_from(self.accel.len()).unwrap(); + dst[1..][..self.accel.len()].copy_from_slice(self.accel); + + Ok(nwrite) + } + + /// Return the total number of bytes that this state consumes in its + /// encoded form. + fn write_to_len(&self) -> usize { + let mut len = 2 + + (self.ntrans * 2) + + (self.ntrans * StateID::SIZE) + + (1 + self.accel.len()); + if self.is_match { + len += size_of::<u32>() + self.pattern_ids.len(); + } + len + } +} + +impl<'a> fmt::Debug for State<'a> { + fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result { + let mut printed = false; + for i in 0..(self.ntrans - 1) { + let next = self.next_at(i); + if next == DEAD { + continue; + } + + if printed { + write!(f, ", ")?; + } + let (start, end) = self.range(i); + if start == end { + write!(f, "{:?} => {:?}", DebugByte(start), next.as_usize())?; + } else { + write!( + f, + "{:?}-{:?} => {:?}", + DebugByte(start), + DebugByte(end), + next.as_usize(), + )?; + } + printed = true; + } + let eoi = self.next_at(self.ntrans - 1); + if eoi != DEAD { + if printed { + write!(f, ", ")?; + } + write!(f, "EOI => {:?}", eoi.as_usize())?; + } + Ok(()) + } +} + +/// A representation of a mutable sparse DFA state that can be cheaply +/// materialized from a state identifier. +#[cfg(feature = "dfa-build")] +struct StateMut<'a> { + /// The identifier of this state. + id: StateID, + /// Whether this is a match state or not. + is_match: bool, + /// The number of transitions in this state. + ntrans: usize, + /// Pairs of input ranges, where there is one pair for each transition. + /// Each pair specifies an inclusive start and end byte range for the + /// corresponding transition. + input_ranges: &'a mut [u8], + /// Transitions to the next state. This slice contains native endian + /// encoded state identifiers, with `S` as the representation. Thus, there + /// are `ntrans * size_of::<S>()` bytes in this slice. + next: &'a mut [u8], + /// If this is a match state, then this contains the pattern IDs that match + /// when the DFA is in this state. + /// + /// This is a contiguous sequence of 32-bit native endian encoded integers. + pattern_ids: &'a [u8], + /// An accelerator for this state, if present. If this state has no + /// accelerator, then this is an empty slice. When non-empty, this slice + /// has length at most 3 and corresponds to the exhaustive set of bytes + /// that must be seen in order to transition out of this state. + accel: &'a mut [u8], +} + +#[cfg(feature = "dfa-build")] +impl<'a> StateMut<'a> { + /// Sets the ith transition to the given state. + fn set_next_at(&mut self, i: usize, next: StateID) { + let start = i * StateID::SIZE; + let end = start + StateID::SIZE; + wire::write_state_id::<wire::NE>(next, &mut self.next[start..end]); + } +} + +#[cfg(feature = "dfa-build")] +impl<'a> fmt::Debug for StateMut<'a> { + fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result { + let state = State { + id: self.id, + is_match: self.is_match, + ntrans: self.ntrans, + input_ranges: self.input_ranges, + next: self.next, + pattern_ids: self.pattern_ids, + accel: self.accel, + }; + fmt::Debug::fmt(&state, f) + } +} + +// In order to validate everything, we not only need to make sure we +// can decode every state, but that every transition in every state +// points to a valid state. There are many duplicative transitions, so +// we record state IDs that we've verified so that we don't redo the +// decoding work. +// +// Except, when in no_std mode, we don't have dynamic memory allocation +// available to us, so we skip this optimization. It's not clear +// whether doing something more clever is worth it just yet. If you're +// profiling this code and need it to run faster, please file an issue. +// +// OK, so we also use this to record the set of valid state IDs. Since +// it is possible for a transition to point to an invalid state ID that +// still (somehow) deserializes to a valid state. So we need to make +// sure our transitions are limited to actually correct state IDs. +// The problem is, I'm not sure how to do this verification step in +// no-std no-alloc mode. I think we'd *have* to store the set of valid +// state IDs in the DFA itself. For now, we don't do this verification +// in no-std no-alloc mode. The worst thing that can happen is an +// incorrect result. But no panics or memory safety problems should +// result. Because we still do validate that the state itself is +// "valid" in the sense that everything it points to actually exists. +// +// ---AG +#[derive(Debug)] +struct Seen { + #[cfg(feature = "alloc")] + set: alloc::collections::BTreeSet<StateID>, + #[cfg(not(feature = "alloc"))] + set: core::marker::PhantomData<StateID>, +} + +#[cfg(feature = "alloc")] +impl Seen { + fn new() -> Seen { + Seen { set: alloc::collections::BTreeSet::new() } + } + fn insert(&mut self, id: StateID) { + self.set.insert(id); + } + fn contains(&self, id: &StateID) -> bool { + self.set.contains(id) + } +} + +#[cfg(not(feature = "alloc"))] +impl Seen { + fn new() -> Seen { + Seen { set: core::marker::PhantomData } + } + fn insert(&mut self, _id: StateID) {} + fn contains(&self, _id: &StateID) -> bool { + true + } +} + +/* +/// A binary search routine specialized specifically to a sparse DFA state's +/// transitions. Specifically, the transitions are defined as a set of pairs +/// of input bytes that delineate an inclusive range of bytes. If the input +/// byte is in the range, then the corresponding transition is a match. +/// +/// This binary search accepts a slice of these pairs and returns the position +/// of the matching pair (the ith transition), or None if no matching pair +/// could be found. +/// +/// Note that this routine is not currently used since it was observed to +/// either decrease performance when searching ASCII, or did not provide enough +/// of a boost on non-ASCII haystacks to be worth it. However, we leave it here +/// for posterity in case we can find a way to use it. +/// +/// In theory, we could use the standard library's search routine if we could +/// cast a `&[u8]` to a `&[(u8, u8)]`, but I don't believe this is currently +/// guaranteed to be safe and is thus UB (since I don't think the in-memory +/// representation of `(u8, u8)` has been nailed down). One could define a +/// repr(C) type, but the casting doesn't seem justified. +#[cfg_attr(feature = "perf-inline", inline(always))] +fn binary_search_ranges(ranges: &[u8], needle: u8) -> Option<usize> { + debug_assert!(ranges.len() % 2 == 0, "ranges must have even length"); + debug_assert!(ranges.len() <= 512, "ranges should be short"); + + let (mut left, mut right) = (0, ranges.len() / 2); + while left < right { + let mid = (left + right) / 2; + let (b1, b2) = (ranges[mid * 2], ranges[mid * 2 + 1]); + if needle < b1 { + right = mid; + } else if needle > b2 { + left = mid + 1; + } else { + return Some(mid); + } + } + None +} +*/ + +#[cfg(all(test, feature = "syntax", feature = "dfa-build"))] +mod tests { + use crate::{ + dfa::{dense::DFA, Automaton}, + nfa::thompson, + Input, MatchError, + }; + + // See the analogous test in src/hybrid/dfa.rs and src/dfa/dense.rs. + #[test] + fn heuristic_unicode_forward() { + let dfa = DFA::builder() + .configure(DFA::config().unicode_word_boundary(true)) + .thompson(thompson::Config::new().reverse(true)) + .build(r"\b[0-9]+\b") + .unwrap() + .to_sparse() + .unwrap(); + + let input = Input::new("β123").range(2..); + let expected = MatchError::quit(0xB2, 1); + let got = dfa.try_search_fwd(&input); + assert_eq!(Err(expected), got); + + let input = Input::new("123β").range(..3); + let expected = MatchError::quit(0xCE, 3); + let got = dfa.try_search_fwd(&input); + assert_eq!(Err(expected), got); + } + + // See the analogous test in src/hybrid/dfa.rs and src/dfa/dense.rs. + #[test] + fn heuristic_unicode_reverse() { + let dfa = DFA::builder() + .configure(DFA::config().unicode_word_boundary(true)) + .thompson(thompson::Config::new().reverse(true)) + .build(r"\b[0-9]+\b") + .unwrap() + .to_sparse() + .unwrap(); + + let input = Input::new("β123").range(2..); + let expected = MatchError::quit(0xB2, 1); + let got = dfa.try_search_rev(&input); + assert_eq!(Err(expected), got); + + let input = Input::new("123β").range(..3); + let expected = MatchError::quit(0xCE, 3); + let got = dfa.try_search_rev(&input); + assert_eq!(Err(expected), got); + } +} |