diff options
Diffstat (limited to 'vendor/flate2/src/mem.rs')
| -rw-r--r-- | vendor/flate2/src/mem.rs | 772 |
1 files changed, 772 insertions, 0 deletions
diff --git a/vendor/flate2/src/mem.rs b/vendor/flate2/src/mem.rs new file mode 100644 index 0000000..d4a5091 --- /dev/null +++ b/vendor/flate2/src/mem.rs @@ -0,0 +1,772 @@ +use std::error::Error; +use std::fmt; +use std::io; + +use crate::ffi::{self, Backend, Deflate, DeflateBackend, ErrorMessage, Inflate, InflateBackend}; +use crate::Compression; + +/// Raw in-memory compression stream for blocks of data. +/// +/// This type is the building block for the I/O streams in the rest of this +/// crate. It requires more management than the [`Read`]/[`Write`] API but is +/// maximally flexible in terms of accepting input from any source and being +/// able to produce output to any memory location. +/// +/// It is recommended to use the I/O stream adaptors over this type as they're +/// easier to use. +/// +/// [`Read`]: https://doc.rust-lang.org/std/io/trait.Read.html +/// [`Write`]: https://doc.rust-lang.org/std/io/trait.Write.html +#[derive(Debug)] +pub struct Compress { + inner: Deflate, +} + +/// Raw in-memory decompression stream for blocks of data. +/// +/// This type is the building block for the I/O streams in the rest of this +/// crate. It requires more management than the [`Read`]/[`Write`] API but is +/// maximally flexible in terms of accepting input from any source and being +/// able to produce output to any memory location. +/// +/// It is recommended to use the I/O stream adaptors over this type as they're +/// easier to use. +/// +/// [`Read`]: https://doc.rust-lang.org/std/io/trait.Read.html +/// [`Write`]: https://doc.rust-lang.org/std/io/trait.Write.html +#[derive(Debug)] +pub struct Decompress { + inner: Inflate, +} + +/// Values which indicate the form of flushing to be used when compressing +/// in-memory data. +#[derive(Copy, Clone, PartialEq, Eq, Debug)] +#[non_exhaustive] +pub enum FlushCompress { + /// A typical parameter for passing to compression/decompression functions, + /// this indicates that the underlying stream to decide how much data to + /// accumulate before producing output in order to maximize compression. + None = ffi::MZ_NO_FLUSH as isize, + + /// All pending output is flushed to the output buffer and the output is + /// aligned on a byte boundary so that the decompressor can get all input + /// data available so far. + /// + /// Flushing may degrade compression for some compression algorithms and so + /// it should only be used when necessary. This will complete the current + /// deflate block and follow it with an empty stored block. + Sync = ffi::MZ_SYNC_FLUSH as isize, + + /// All pending output is flushed to the output buffer, but the output is + /// not aligned to a byte boundary. + /// + /// All of the input data so far will be available to the decompressor (as + /// with `Flush::Sync`. This completes the current deflate block and follows + /// it with an empty fixed codes block that is 10 bites long, and it assures + /// that enough bytes are output in order for the decompressor to finish the + /// block before the empty fixed code block. + Partial = ffi::MZ_PARTIAL_FLUSH as isize, + + /// All output is flushed as with `Flush::Sync` and the compression state is + /// reset so decompression can restart from this point if previous + /// compressed data has been damaged or if random access is desired. + /// + /// Using this option too often can seriously degrade compression. + Full = ffi::MZ_FULL_FLUSH as isize, + + /// Pending input is processed and pending output is flushed. + /// + /// The return value may indicate that the stream is not yet done and more + /// data has yet to be processed. + Finish = ffi::MZ_FINISH as isize, +} + +/// Values which indicate the form of flushing to be used when +/// decompressing in-memory data. +#[derive(Copy, Clone, PartialEq, Eq, Debug)] +#[non_exhaustive] +pub enum FlushDecompress { + /// A typical parameter for passing to compression/decompression functions, + /// this indicates that the underlying stream to decide how much data to + /// accumulate before producing output in order to maximize compression. + None = ffi::MZ_NO_FLUSH as isize, + + /// All pending output is flushed to the output buffer and the output is + /// aligned on a byte boundary so that the decompressor can get all input + /// data available so far. + /// + /// Flushing may degrade compression for some compression algorithms and so + /// it should only be used when necessary. This will complete the current + /// deflate block and follow it with an empty stored block. + Sync = ffi::MZ_SYNC_FLUSH as isize, + + /// Pending input is processed and pending output is flushed. + /// + /// The return value may indicate that the stream is not yet done and more + /// data has yet to be processed. + Finish = ffi::MZ_FINISH as isize, +} + +/// The inner state for an error when decompressing +#[derive(Debug)] +pub(crate) enum DecompressErrorInner { + General { msg: ErrorMessage }, + NeedsDictionary(u32), +} + +/// Error returned when a decompression object finds that the input stream of +/// bytes was not a valid input stream of bytes. +#[derive(Debug)] +pub struct DecompressError(pub(crate) DecompressErrorInner); + +impl DecompressError { + /// Indicates whether decompression failed due to requiring a dictionary. + /// + /// The resulting integer is the Adler-32 checksum of the dictionary + /// required. + pub fn needs_dictionary(&self) -> Option<u32> { + match self.0 { + DecompressErrorInner::NeedsDictionary(adler) => Some(adler), + _ => None, + } + } +} + +#[inline] +pub(crate) fn decompress_failed<T>(msg: ErrorMessage) -> Result<T, DecompressError> { + Err(DecompressError(DecompressErrorInner::General { msg })) +} + +#[inline] +pub(crate) fn decompress_need_dict<T>(adler: u32) -> Result<T, DecompressError> { + Err(DecompressError(DecompressErrorInner::NeedsDictionary( + adler, + ))) +} + +/// Error returned when a compression object is used incorrectly or otherwise +/// generates an error. +#[derive(Debug)] +pub struct CompressError { + pub(crate) msg: ErrorMessage, +} + +#[inline] +pub(crate) fn compress_failed<T>(msg: ErrorMessage) -> Result<T, CompressError> { + Err(CompressError { msg }) +} + +/// Possible status results of compressing some data or successfully +/// decompressing a block of data. +#[derive(Copy, Clone, PartialEq, Eq, Debug)] +pub enum Status { + /// Indicates success. + /// + /// Means that more input may be needed but isn't available + /// and/or there's more output to be written but the output buffer is full. + Ok, + + /// Indicates that forward progress is not possible due to input or output + /// buffers being empty. + /// + /// For compression it means the input buffer needs some more data or the + /// output buffer needs to be freed up before trying again. + /// + /// For decompression this means that more input is needed to continue or + /// the output buffer isn't large enough to contain the result. The function + /// can be called again after fixing both. + BufError, + + /// Indicates that all input has been consumed and all output bytes have + /// been written. Decompression/compression should not be called again. + /// + /// For decompression with zlib streams the adler-32 of the decompressed + /// data has also been verified. + StreamEnd, +} + +impl Compress { + /// Creates a new object ready for compressing data that it's given. + /// + /// The `level` argument here indicates what level of compression is going + /// to be performed, and the `zlib_header` argument indicates whether the + /// output data should have a zlib header or not. + pub fn new(level: Compression, zlib_header: bool) -> Compress { + Compress { + inner: Deflate::make(level, zlib_header, ffi::MZ_DEFAULT_WINDOW_BITS as u8), + } + } + + /// Creates a new object ready for compressing data that it's given. + /// + /// The `level` argument here indicates what level of compression is going + /// to be performed, and the `zlib_header` argument indicates whether the + /// output data should have a zlib header or not. The `window_bits` parameter + /// indicates the base-2 logarithm of the sliding window size and must be + /// between 9 and 15. + /// + /// # Panics + /// + /// If `window_bits` does not fall into the range 9 ..= 15, + /// `new_with_window_bits` will panic. + #[cfg(feature = "any_zlib")] + pub fn new_with_window_bits( + level: Compression, + zlib_header: bool, + window_bits: u8, + ) -> Compress { + assert!( + window_bits > 8 && window_bits < 16, + "window_bits must be within 9 ..= 15" + ); + Compress { + inner: Deflate::make(level, zlib_header, window_bits), + } + } + + /// Creates a new object ready for compressing data that it's given. + /// + /// The `level` argument here indicates what level of compression is going + /// to be performed. + /// + /// The Compress object produced by this constructor outputs gzip headers + /// for the compressed data. + /// + /// # Panics + /// + /// If `window_bits` does not fall into the range 9 ..= 15, + /// `new_with_window_bits` will panic. + #[cfg(feature = "any_zlib")] + pub fn new_gzip(level: Compression, window_bits: u8) -> Compress { + assert!( + window_bits > 8 && window_bits < 16, + "window_bits must be within 9 ..= 15" + ); + Compress { + inner: Deflate::make(level, true, window_bits + 16), + } + } + + /// Returns the total number of input bytes which have been processed by + /// this compression object. + pub fn total_in(&self) -> u64 { + self.inner.total_in() + } + + /// Returns the total number of output bytes which have been produced by + /// this compression object. + pub fn total_out(&self) -> u64 { + self.inner.total_out() + } + + /// Specifies the compression dictionary to use. + /// + /// Returns the Adler-32 checksum of the dictionary. + #[cfg(feature = "any_zlib")] + pub fn set_dictionary(&mut self, dictionary: &[u8]) -> Result<u32, CompressError> { + let stream = &mut *self.inner.inner.stream_wrapper; + stream.msg = std::ptr::null_mut(); + let rc = unsafe { + assert!(dictionary.len() < ffi::uInt::MAX as usize); + ffi::deflateSetDictionary(stream, dictionary.as_ptr(), dictionary.len() as ffi::uInt) + }; + + match rc { + ffi::MZ_STREAM_ERROR => compress_failed(self.inner.inner.msg()), + ffi::MZ_OK => Ok(stream.adler as u32), + c => panic!("unknown return code: {}", c), + } + } + + /// Quickly resets this compressor without having to reallocate anything. + /// + /// This is equivalent to dropping this object and then creating a new one. + pub fn reset(&mut self) { + self.inner.reset(); + } + + /// Dynamically updates the compression level. + /// + /// This can be used to switch between compression levels for different + /// kinds of data, or it can be used in conjunction with a call to reset + /// to reuse the compressor. + /// + /// This may return an error if there wasn't enough output space to complete + /// the compression of the available input data before changing the + /// compression level. Flushing the stream before calling this method + /// ensures that the function will succeed on the first call. + #[cfg(feature = "any_zlib")] + pub fn set_level(&mut self, level: Compression) -> Result<(), CompressError> { + use std::os::raw::c_int; + let stream = &mut *self.inner.inner.stream_wrapper; + stream.msg = std::ptr::null_mut(); + + let rc = unsafe { ffi::deflateParams(stream, level.0 as c_int, ffi::MZ_DEFAULT_STRATEGY) }; + + match rc { + ffi::MZ_OK => Ok(()), + ffi::MZ_BUF_ERROR => compress_failed(self.inner.inner.msg()), + c => panic!("unknown return code: {}", c), + } + } + + /// Compresses the input data into the output, consuming only as much + /// input as needed and writing as much output as possible. + /// + /// The flush option can be any of the available `FlushCompress` parameters. + /// + /// To learn how much data was consumed or how much output was produced, use + /// the `total_in` and `total_out` functions before/after this is called. + pub fn compress( + &mut self, + input: &[u8], + output: &mut [u8], + flush: FlushCompress, + ) -> Result<Status, CompressError> { + self.inner.compress(input, output, flush) + } + + /// Compresses the input data into the extra space of the output, consuming + /// only as much input as needed and writing as much output as possible. + /// + /// This function has the same semantics as `compress`, except that the + /// length of `vec` is managed by this function. This will not reallocate + /// the vector provided or attempt to grow it, so space for the output must + /// be reserved in the output vector by the caller before calling this + /// function. + pub fn compress_vec( + &mut self, + input: &[u8], + output: &mut Vec<u8>, + flush: FlushCompress, + ) -> Result<Status, CompressError> { + write_to_spare_capacity_of_vec(output, |out| { + let before = self.total_out(); + let ret = self.compress(input, out, flush); + let bytes_written = self.total_out() - before; + (bytes_written as usize, ret) + }) + } +} + +impl Decompress { + /// Creates a new object ready for decompressing data that it's given. + /// + /// The `zlib_header` argument indicates whether the input data is expected + /// to have a zlib header or not. + pub fn new(zlib_header: bool) -> Decompress { + Decompress { + inner: Inflate::make(zlib_header, ffi::MZ_DEFAULT_WINDOW_BITS as u8), + } + } + + /// Creates a new object ready for decompressing data that it's given. + /// + /// The `zlib_header` argument indicates whether the input data is expected + /// to have a zlib header or not. The `window_bits` parameter indicates the + /// base-2 logarithm of the sliding window size and must be between 9 and 15. + /// + /// # Panics + /// + /// If `window_bits` does not fall into the range 9 ..= 15, + /// `new_with_window_bits` will panic. + #[cfg(feature = "any_zlib")] + pub fn new_with_window_bits(zlib_header: bool, window_bits: u8) -> Decompress { + assert!( + window_bits > 8 && window_bits < 16, + "window_bits must be within 9 ..= 15" + ); + Decompress { + inner: Inflate::make(zlib_header, window_bits), + } + } + + /// Creates a new object ready for decompressing data that it's given. + /// + /// The Decompress object produced by this constructor expects gzip headers + /// for the compressed data. + /// + /// # Panics + /// + /// If `window_bits` does not fall into the range 9 ..= 15, + /// `new_with_window_bits` will panic. + #[cfg(feature = "any_zlib")] + pub fn new_gzip(window_bits: u8) -> Decompress { + assert!( + window_bits > 8 && window_bits < 16, + "window_bits must be within 9 ..= 15" + ); + Decompress { + inner: Inflate::make(true, window_bits + 16), + } + } + + /// Returns the total number of input bytes which have been processed by + /// this decompression object. + pub fn total_in(&self) -> u64 { + self.inner.total_in() + } + + /// Returns the total number of output bytes which have been produced by + /// this decompression object. + pub fn total_out(&self) -> u64 { + self.inner.total_out() + } + + /// Decompresses the input data into the output, consuming only as much + /// input as needed and writing as much output as possible. + /// + /// The flush option can be any of the available `FlushDecompress` parameters. + /// + /// If the first call passes `FlushDecompress::Finish` it is assumed that + /// the input and output buffers are both sized large enough to decompress + /// the entire stream in a single call. + /// + /// A flush value of `FlushDecompress::Finish` indicates that there are no + /// more source bytes available beside what's already in the input buffer, + /// and the output buffer is large enough to hold the rest of the + /// decompressed data. + /// + /// To learn how much data was consumed or how much output was produced, use + /// the `total_in` and `total_out` functions before/after this is called. + /// + /// # Errors + /// + /// If the input data to this instance of `Decompress` is not a valid + /// zlib/deflate stream then this function may return an instance of + /// `DecompressError` to indicate that the stream of input bytes is corrupted. + pub fn decompress( + &mut self, + input: &[u8], + output: &mut [u8], + flush: FlushDecompress, + ) -> Result<Status, DecompressError> { + self.inner.decompress(input, output, flush) + } + + /// Decompresses the input data into the extra space in the output vector + /// specified by `output`. + /// + /// This function has the same semantics as `decompress`, except that the + /// length of `vec` is managed by this function. This will not reallocate + /// the vector provided or attempt to grow it, so space for the output must + /// be reserved in the output vector by the caller before calling this + /// function. + /// + /// # Errors + /// + /// If the input data to this instance of `Decompress` is not a valid + /// zlib/deflate stream then this function may return an instance of + /// `DecompressError` to indicate that the stream of input bytes is corrupted. + pub fn decompress_vec( + &mut self, + input: &[u8], + output: &mut Vec<u8>, + flush: FlushDecompress, + ) -> Result<Status, DecompressError> { + write_to_spare_capacity_of_vec(output, |out| { + let before = self.total_out(); + let ret = self.decompress(input, out, flush); + let bytes_written = self.total_out() - before; + (bytes_written as usize, ret) + }) + } + + /// Specifies the decompression dictionary to use. + #[cfg(feature = "any_zlib")] + pub fn set_dictionary(&mut self, dictionary: &[u8]) -> Result<u32, DecompressError> { + let stream = &mut *self.inner.inner.stream_wrapper; + stream.msg = std::ptr::null_mut(); + let rc = unsafe { + assert!(dictionary.len() < ffi::uInt::MAX as usize); + ffi::inflateSetDictionary(stream, dictionary.as_ptr(), dictionary.len() as ffi::uInt) + }; + + match rc { + ffi::MZ_STREAM_ERROR => decompress_failed(self.inner.inner.msg()), + ffi::MZ_DATA_ERROR => decompress_need_dict(stream.adler as u32), + ffi::MZ_OK => Ok(stream.adler as u32), + c => panic!("unknown return code: {}", c), + } + } + + /// Performs the equivalent of replacing this decompression state with a + /// freshly allocated copy. + /// + /// This function may not allocate memory, though, and attempts to reuse any + /// previously existing resources. + /// + /// The argument provided here indicates whether the reset state will + /// attempt to decode a zlib header first or not. + pub fn reset(&mut self, zlib_header: bool) { + self.inner.reset(zlib_header); + } +} + +impl Error for DecompressError {} + +impl DecompressError { + /// Retrieve the implementation's message about why the operation failed, if one exists. + pub fn message(&self) -> Option<&str> { + match &self.0 { + DecompressErrorInner::General { msg } => msg.get(), + _ => None, + } + } +} + +impl From<DecompressError> for io::Error { + fn from(data: DecompressError) -> io::Error { + io::Error::new(io::ErrorKind::Other, data) + } +} + +impl fmt::Display for DecompressError { + fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result { + let msg = match &self.0 { + DecompressErrorInner::General { msg } => msg.get(), + DecompressErrorInner::NeedsDictionary { .. } => Some("requires a dictionary"), + }; + match msg { + Some(msg) => write!(f, "deflate decompression error: {}", msg), + None => write!(f, "deflate decompression error"), + } + } +} + +impl Error for CompressError {} + +impl CompressError { + /// Retrieve the implementation's message about why the operation failed, if one exists. + pub fn message(&self) -> Option<&str> { + self.msg.get() + } +} + +impl From<CompressError> for io::Error { + fn from(data: CompressError) -> io::Error { + io::Error::new(io::ErrorKind::Other, data) + } +} + +impl fmt::Display for CompressError { + fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result { + match self.msg.get() { + Some(msg) => write!(f, "deflate compression error: {}", msg), + None => write!(f, "deflate compression error"), + } + } +} + +/// Allows `writer` to write data into the spare capacity of the `output` vector. +/// This will not reallocate the vector provided or attempt to grow it, so space +/// for the `output` must be reserved by the caller before calling this +/// function. +/// +/// `writer` needs to return the number of bytes written (and can also return +/// another arbitrary return value). +fn write_to_spare_capacity_of_vec<T>( + output: &mut Vec<u8>, + writer: impl FnOnce(&mut [u8]) -> (usize, T), +) -> T { + let cap = output.capacity(); + let len = output.len(); + + output.resize(output.capacity(), 0); + let (bytes_written, ret) = writer(&mut output[len..]); + + let new_len = core::cmp::min(len + bytes_written, cap); // Sanitizes `bytes_written`. + output.resize(new_len, 0 /* unused */); + + ret +} + +#[cfg(test)] +mod tests { + use std::io::Write; + + use crate::write; + use crate::{Compression, Decompress, FlushDecompress}; + + #[cfg(feature = "any_zlib")] + use crate::{Compress, FlushCompress}; + + #[test] + fn issue51() { + let data = vec![ + 0x1f, 0x8b, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0xb3, 0xc9, 0x28, 0xc9, + 0xcd, 0xb1, 0xe3, 0xe5, 0xb2, 0xc9, 0x48, 0x4d, 0x4c, 0xb1, 0xb3, 0x29, 0xc9, 0x2c, + 0xc9, 0x49, 0xb5, 0x33, 0x31, 0x30, 0x51, 0xf0, 0xcb, 0x2f, 0x51, 0x70, 0xcb, 0x2f, + 0xcd, 0x4b, 0xb1, 0xd1, 0x87, 0x08, 0xda, 0xe8, 0x83, 0x95, 0x00, 0x95, 0x26, 0xe5, + 0xa7, 0x54, 0x2a, 0x24, 0xa5, 0x27, 0xe7, 0xe7, 0xe4, 0x17, 0xd9, 0x2a, 0x95, 0x67, + 0x64, 0x96, 0xa4, 0x2a, 0x81, 0x8c, 0x48, 0x4e, 0xcd, 0x2b, 0x49, 0x2d, 0xb2, 0xb3, + 0xc9, 0x30, 0x44, 0x37, 0x01, 0x28, 0x62, 0xa3, 0x0f, 0x95, 0x06, 0xd9, 0x05, 0x54, + 0x04, 0xe5, 0xe5, 0xa5, 0x67, 0xe6, 0x55, 0xe8, 0x1b, 0xea, 0x99, 0xe9, 0x19, 0x21, + 0xab, 0xd0, 0x07, 0xd9, 0x01, 0x32, 0x53, 0x1f, 0xea, 0x3e, 0x00, 0x94, 0x85, 0xeb, + 0xe4, 0xa8, 0x00, 0x00, 0x00, + ]; + + let mut decoded = Vec::with_capacity(data.len() * 2); + + let mut d = Decompress::new(false); + // decompressed whole deflate stream + assert!(d + .decompress_vec(&data[10..], &mut decoded, FlushDecompress::Finish) + .is_ok()); + + // decompress data that has nothing to do with the deflate stream (this + // used to panic) + drop(d.decompress_vec(&[0], &mut decoded, FlushDecompress::None)); + } + + #[test] + fn reset() { + let string = "hello world".as_bytes(); + let mut zlib = Vec::new(); + let mut deflate = Vec::new(); + + let comp = Compression::default(); + write::ZlibEncoder::new(&mut zlib, comp) + .write_all(string) + .unwrap(); + write::DeflateEncoder::new(&mut deflate, comp) + .write_all(string) + .unwrap(); + + let mut dst = [0; 1024]; + let mut decoder = Decompress::new(true); + decoder + .decompress(&zlib, &mut dst, FlushDecompress::Finish) + .unwrap(); + assert_eq!(decoder.total_out(), string.len() as u64); + assert!(dst.starts_with(string)); + + decoder.reset(false); + decoder + .decompress(&deflate, &mut dst, FlushDecompress::Finish) + .unwrap(); + assert_eq!(decoder.total_out(), string.len() as u64); + assert!(dst.starts_with(string)); + } + + #[cfg(feature = "any_zlib")] + #[test] + fn set_dictionary_with_zlib_header() { + let string = "hello, hello!".as_bytes(); + let dictionary = "hello".as_bytes(); + + let mut encoded = Vec::with_capacity(1024); + + let mut encoder = Compress::new(Compression::default(), true); + + let dictionary_adler = encoder.set_dictionary(&dictionary).unwrap(); + + encoder + .compress_vec(string, &mut encoded, FlushCompress::Finish) + .unwrap(); + + assert_eq!(encoder.total_in(), string.len() as u64); + assert_eq!(encoder.total_out(), encoded.len() as u64); + + let mut decoder = Decompress::new(true); + let mut decoded = [0; 1024]; + let decompress_error = decoder + .decompress(&encoded, &mut decoded, FlushDecompress::Finish) + .expect_err("decompression should fail due to requiring a dictionary"); + + let required_adler = decompress_error.needs_dictionary() + .expect("the first call to decompress should indicate a dictionary is required along with the required Adler-32 checksum"); + + assert_eq!(required_adler, dictionary_adler, + "the Adler-32 checksum should match the value when the dictionary was set on the compressor"); + + let actual_adler = decoder.set_dictionary(&dictionary).unwrap(); + + assert_eq!(required_adler, actual_adler); + + // Decompress the rest of the input to the remainder of the output buffer + let total_in = decoder.total_in(); + let total_out = decoder.total_out(); + + let decompress_result = decoder.decompress( + &encoded[total_in as usize..], + &mut decoded[total_out as usize..], + FlushDecompress::Finish, + ); + assert!(decompress_result.is_ok()); + + assert_eq!(&decoded[..decoder.total_out() as usize], string); + } + + #[cfg(feature = "any_zlib")] + #[test] + fn set_dictionary_raw() { + let string = "hello, hello!".as_bytes(); + let dictionary = "hello".as_bytes(); + + let mut encoded = Vec::with_capacity(1024); + + let mut encoder = Compress::new(Compression::default(), false); + + encoder.set_dictionary(&dictionary).unwrap(); + + encoder + .compress_vec(string, &mut encoded, FlushCompress::Finish) + .unwrap(); + + assert_eq!(encoder.total_in(), string.len() as u64); + assert_eq!(encoder.total_out(), encoded.len() as u64); + + let mut decoder = Decompress::new(false); + + decoder.set_dictionary(&dictionary).unwrap(); + + let mut decoded = [0; 1024]; + let decompress_result = decoder.decompress(&encoded, &mut decoded, FlushDecompress::Finish); + + assert!(decompress_result.is_ok()); + + assert_eq!(&decoded[..decoder.total_out() as usize], string); + } + + #[cfg(feature = "any_zlib")] + #[test] + fn test_gzip_flate() { + let string = "hello, hello!".as_bytes(); + + let mut encoded = Vec::with_capacity(1024); + + let mut encoder = Compress::new_gzip(Compression::default(), 9); + + encoder + .compress_vec(string, &mut encoded, FlushCompress::Finish) + .unwrap(); + + assert_eq!(encoder.total_in(), string.len() as u64); + assert_eq!(encoder.total_out(), encoded.len() as u64); + + let mut decoder = Decompress::new_gzip(9); + + let mut decoded = [0; 1024]; + decoder + .decompress(&encoded, &mut decoded, FlushDecompress::Finish) + .unwrap(); + + assert_eq!(&decoded[..decoder.total_out() as usize], string); + } + + #[cfg(feature = "any_zlib")] + #[test] + fn test_error_message() { + let mut decoder = Decompress::new(false); + let mut decoded = [0; 128]; + let garbage = b"xbvxzi"; + + let err = decoder + .decompress(&*garbage, &mut decoded, FlushDecompress::Finish) + .unwrap_err(); + + assert_eq!(err.message(), Some("invalid stored block lengths")); + } +} |