Adding upstream version 1.0.12.upstream/1.0.12upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 36 insertions, 0 deletions

diff --git a/doc/stonith/README.riloe b/doc/stonith/README.riloe
new file mode 100644
index 0000000..4befe95
--- /dev/null
+++ b/doc/stonith/README.riloe
@@ -0,0 +1,36 @@
+Note for iLO 3 users
+
+This plugin doesn't support the iLO version 3. Please use ipmilan
+or external/ipmi, iLO3 should support IPMI.
+
+Alain St-Denis wrote the riloe plugin. Here is short usage:
+
+primitive st0 stonith:external/riloe \
+	hostlist=target-node \
+	ilo_hostname=ilo-ip-address \
+	ilo_user=admin  ilo_password=secret ilo_protocol=2.0
+
+The following additional parameters are available:
+
+ilo_can_reset:
+	Set to "1" if the ilo is capable of rebooting the host.
+	Defaults to '0'.
+
+ilo_protocol:
+	Defaults to 1.2. Set to the protocol version ilo supports.
+
+ilo_powerdown_method:
+	"button" or "power", the former simulates pressing the
+	button, the latter pulling the power plug. Defaults to
+	"power". The "button" method is easier on the host, but
+	requires ACPI.  "power" should be more reliable, but not to
+	be used excessively for testing.
+
+ilo_proxyhost (string): Proxy hostname
+	proxy hostname if required to access ILO board
+
+ilo_proxyport (string, [3128]): Proxy port
+	proxy port if required to access ILO board
+	parameter will be ignored if proxy hostname is not set
+
+