diff options
Diffstat (limited to '')
| -rw-r--r-- | lib/plugins/stonith/external/ipmi | 276 |
1 files changed, 276 insertions, 0 deletions
diff --git a/lib/plugins/stonith/external/ipmi b/lib/plugins/stonith/external/ipmi new file mode 100644 index 0000000..abadd5a --- /dev/null +++ b/lib/plugins/stonith/external/ipmi @@ -0,0 +1,276 @@ +#!/bin/sh +# +# External STONITH module using IPMI. +# This modules uses uses the ipmitool program available from +# http://ipmitool.sf.net/ for actual communication with the +# managed device. +# +# Copyright (c) 2007 Martin Bene <martin.bene@icomedias.com> +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of version 2 of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +# +# Further, this software is distributed without any warranty that it is +# free of the rightful claim of any third person regarding infringement +# or the like. Any license provided herein, whether implied or +# otherwise, applies only to this software file. Patent licenses, if +# any, provided herein do not apply to combinations of this program with +# other software, or any other product whatsoever. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. +# + +# Initialization -- fix locale settings so we can parse output from +# binaries if we need it +LANG=C +LC_ALL=C + +RESET="power reset" +POWEROFF="power off" +POWERON="power on" +STATUS="power status" +IPMITOOL=${ipmitool:-"`which ipmitool 2>/dev/null`"} + +have_ipmi() { + test -x "${IPMITOOL}" +} + +# Wrapper function for ipmitool that sets the correct host IP address, +# username, and password, and invokes ipmitool with any arguments +# passed in +run_ipmitool() { + local ipmitool_opts privlvl="" + have_ipmi || { + ha_log.sh err "ipmitool not installed" + return 1 + } + if [ -z "${ipaddr}" -o -z "${userid}" -o -z "${passwd}" ]; then + ha_log.sh err "ipaddr, userid or passwd missing; check configuration" + return 1 + fi + + if [ -z "${interface}" ]; then + # default to "lan" interface + interface="lan" + fi + if [ -n "${priv}" ]; then + # default to "lan" interface + privlvl="-L $priv" + fi + + ipmitool_opts="-I ${interface} -H ${ipaddr} $privlvl" + + case "${passwd_method}" in + param|'') + passwd_method=param + M="-P" + ;; + env) + M="-E" + ;; + file) + M="-f" + ;; + *) + ha_log.sh err "invalid passwd_method: \"${passwd_method}\"" + return 1 + esac + + action="$*" + + if [ $passwd_method = env ] + then + IPMI_PASSWORD="${passwd}" ${IPMITOOL} $ipmitool_opts -U "${userid}" -E ${action} + else + ${IPMITOOL} $ipmitool_opts -U "${userid}" $M "${passwd}" ${action} + fi 2>&1 +} + +# Yet another convenience wrapper that invokes run_ipmitool, captures +# its output, logs the output, returns either 0 (on success) or 1 (on +# any error) +do_ipmi() { + if outp=`run_ipmitool $*`; then + ha_log.sh debug "ipmitool output: `echo $outp`" + return 0 + else + ha_log.sh err "error executing ipmitool: `echo $outp`" + return 1 + fi +} + +# Check if the managed node is powered on. To do so, issue the "power +# status" command. Should return either "Chassis Power is on" or +# "Chassis Power is off". +ipmi_is_power_on() { + local outp + outp=`run_ipmitool ${STATUS}` + case "${outp}" in + *on) + return 0 + ;; + *off) + return 1 + ;; + esac +} + + +case ${1} in +gethosts) + echo $hostname + exit 0 + ;; +on) + do_ipmi "${POWERON}" + exit + ;; +off) + do_ipmi "${POWEROFF}" + exit + ;; +reset) + if ipmi_is_power_on; then + do_ipmi "${RESET}" + else + do_ipmi "${POWERON}" + fi + exit + ;; +status) + # "status" reflects the status of the stonith _device_, not + # the managed node. Hence, only check if we can contact the + # IPMI device with "power status" command, don't pay attention + # to whether the node is in fact powered on or off. + do_ipmi "${STATUS}" + exit $? + ;; +getconfignames) + for i in hostname ipaddr userid passwd interface; do + echo $i + done + exit 0 + ;; +getinfo-devid) + echo "IPMI STONITH device" + exit 0 + ;; +getinfo-devname) + echo "IPMI STONITH external device" + exit 0 + ;; +getinfo-devdescr) + echo "ipmitool based power management. Apparently, the power off" + echo "method of ipmitool is intercepted by ACPI which then makes" + echo "a regular shutdown. If case of a split brain on a two-node" + echo "it may happen that no node survives. For two-node clusters" + echo "use only the reset method." + exit 0 + ;; +getinfo-devurl) + echo "http://ipmitool.sf.net/" + exit 0 + ;; +getinfo-xml) + cat << IPMIXML +<parameters> +<parameter name="hostname" unique="1"> +<content type="string" /> +<shortdesc lang="en"> +Hostname +</shortdesc> +<longdesc lang="en"> +The name of the host to be managed by this STONITH device. +</longdesc> +</parameter> + +<parameter name="ipaddr" unique="1"> +<content type="string" /> +<shortdesc lang="en"> +IP Address +</shortdesc> +<longdesc lang="en"> +The IP address of the STONITH device. +</longdesc> +</parameter> + +<parameter name="userid" unique="0"> +<content type="string" /> +<shortdesc lang="en"> +Login +</shortdesc> +<longdesc lang="en"> +The username used for logging in to the STONITH device. +</longdesc> +</parameter> + +<parameter name="passwd" unique="0"> +<content type="string" /> +<shortdesc lang="en"> +Password +</shortdesc> +<longdesc lang="en"> +The password used for logging in to the STONITH device. +</longdesc> +</parameter> + +<parameter name="passwd_method" unique="0"> +<content type="string" default="param"/> +<shortdesc lang="en"> +Method for passing passwd parameter +</shortdesc> +<longdesc lang="en"> +Method for passing the passwd parameter to ipmitool + param: pass as parameter (-P) + env: pass via environment (-E) + file: value of "passwd" is actually a file name, pass with (-f) +</longdesc> +</parameter> + +<parameter name="interface" unique="0"> +<content type="string" default="lan"/> +<shortdesc lang="en"> +IPMI interface +</shortdesc> +<longdesc lang="en"> +IPMI interface to use, such as "lan" or "lanplus". +</longdesc> +</parameter> + +<parameter name="priv" unique="0"> +<content type="string" default=""/> +<shortdesc lang="en"> +The privilege level of the user. +</shortdesc> +<longdesc lang="en"> +The privilege level of the user, for instance OPERATOR. If +unspecified the privilege level is ADMINISTRATOR. See +ipmitool(1) -L option for more information. +</longdesc> +</parameter> + +<parameter name="ipmitool" unique="0"> +<content type="string" default=""/> +<shortdesc lang="en"> +IPMI command(ipmitool) +</shortdesc> +<longdesc lang="en"> +Specify the full path to IPMI command. +</longdesc> +</parameter> + +</parameters> +IPMIXML + exit 0 + ;; +*) + exit 1 + ;; +esac |