diff options
Diffstat (limited to '')
| -rw-r--r-- | test/features/resource_set.feature | 154 |
1 files changed, 154 insertions, 0 deletions
diff --git a/test/features/resource_set.feature b/test/features/resource_set.feature new file mode 100644 index 0000000..a6726d7 --- /dev/null +++ b/test/features/resource_set.feature @@ -0,0 +1,154 @@ +@resource +Feature: Use "crm configure set" to update attributes and operations + + Tag @clean means need to stop cluster service if the service is available + Need nodes: hanode1 hanode2 + + Background: Setup cluster and configure some resources + Given Cluster service is "stopped" on "hanode1" + When Run "crm cluster init -y" on "hanode1" + Then Cluster service is "started" on "hanode1" + When Run "crm cluster join -c hanode1 -y" on "hanode2" + Then Cluster service is "started" on "hanode2" + When Run "crm configure primitive d Dummy op monitor interval=3s" on "hanode1" + Then Resource "d" type "Dummy" is "Started" + When Run "crm configure primitive vip IPaddr2 params ip=@vip.0 op monitor interval=3s" on "hanode1" + Then Resource "vip" type "IPaddr2" is "Started" + And Cluster virtual IP is "@vip.0" + When Run "crm configure primitive s ocf:pacemaker:Stateful op monitor role=Promoted interval=3s op monitor role=Unpromoted interval=5s" on "hanode1" + Then Resource "s" type "Stateful" is "Started" + + @clean + Scenario: Validation, input the wrong parameters + When Try "crm configure set path" + Then Except "ERROR: configure.set: Expected (path value), takes exactly 2 arguments (1 given)" + When Try "crm configure set xxxx value" + Then Except "ERROR: configure.set: Invalid path: "xxxx"; Valid path: "id.[op_type.][interval.]name"" + When Try "crm configure set xxxx.name value" + Then Except "ERROR: configure.set: Object xxxx not found" + When Try "crm configure set d.name value" + Then Except "ERROR: configure.set: Attribute not found: d.name" + When Try "crm configure set d.monitor.100.timeout 10" + Then Except "ERROR: configure.set: Operation "monitor" interval "100" not found for resource d" + When Try "crm configure set s.monitor.interval 20" + Then Except "ERROR: configure.set: Should specify interval of monitor" + + @clean + Scenario: Using configure.set to update resource parameters and operation values + When Run "crm configure set vip.ip @vip.0" on "hanode1" + Then Cluster virtual IP is "@vip.0" + When Run "crm configure set d.monitor.on-fail ignore" on "hanode1" + And Run "crm configure show d" on "hanode1" + Then Expected "on-fail=ignore" in stdout + When Run "crm configure set s.monitor.5s.interval 20s" on "hanode1" + And Run "crm configure show s" on "hanode1" + Then Expected "interval=20s" in stdout + When Run "crm configure set op-options.timeout 101" on "hanode1" + And Run "crm configure show op-options" on "hanode1" + Then Expected "timeout=101" in stdout + + @clean + Scenario: Parse node and lifetime correctly (bsc#1192618) + Given Resource "d" is started on "hanode1" + # move <res> <node> + When Run "crm resource move d hanode2" on "hanode1" + When Run "sleep 2" on "hanode1" + Then Resource "d" is started on "hanode2" + When Run "crm resource clear d" on "hanode1" + + # move <res> <node> force + When Run "crm resource move d hanode1" on "hanode1" + When Run "sleep 2" on "hanode1" + Then Resource "d" is started on "hanode1" + When Run "crm resource clear d" on "hanode1" + + # move <res> force + When Run "crm resource move d force" on "hanode1" + When Run "sleep 2" on "hanode1" + Then Resource "d" is started on "hanode2" + When Run "crm resource clear d" on "hanode1" + + # move <res> <lifetime> force + When Run "crm resource move d PT5M force" on "hanode1" + When Run "sleep 2" on "hanode1" + Then Resource "d" is started on "hanode1" + When Run "crm resource clear d" on "hanode1" + + # move <res> <node> <lifetime> + When Run "crm resource move d hanode2 PT5M" on "hanode1" + When Run "sleep 2" on "hanode1" + Then Resource "d" is started on "hanode2" + When Run "crm resource clear d" on "hanode1" + + # move <res> <node> <lifetime> force + When Run "crm resource move d hanode1 PT5M force" on "hanode1" + When Run "sleep 2" on "hanode1" + Then Resource "d" is started on "hanode1" + When Run "crm resource clear d" on "hanode1" + + When Try "crm resource move d hanode2 PT5M force xxx" + Then Except "ERROR: resource.move: usage: move <rsc> [<node>] [<lifetime>] [force]" + When Try "crm resource move d hanode2 PT5M forcd" + Then Except "ERROR: resource.move: usage: move <rsc> [<node>] [<lifetime>] [force]" + When Try "crm resource move d xxxx PT5M force" + Then Except "ERROR: resource.move: Not our node: xxxx" + When Try "crm resource move d" + Then Except "ERROR: resource.move: No target node: Move requires either a target node or 'force'" + + @clean + Scenario: promote and demote promotable clone resource (bsc#1194125) + When Run "crm configure primitive s2 ocf:pacemaker:Stateful op monitor role=Promoted interval=3s op monitor role=Unpromoted interval=5s" on "hanode1" + And Run "crm configure clone p2 s2 meta promotable=true" on "hanode1" + And Run "crm resource demote p2" on "hanode1" + Then Run "sleep 2;! crm_resource --locate -r p2|grep -E 'Master|Promoted'" OK + When Run "crm resource promote p2" on "hanode2" + Then Run "sleep 2;crm_resource --locate -r p2|grep -E 'Master|Promoted'" OK + + @clean + Scenario: operation warning + When Run "crm configure primitive id=d2 Dummy op start interval=5s" on "hanode1" + Then Expected "WARNING: d2: Specified interval for start is 5s, it must be 0" in stderr + When Run "crm configure primitive id=d3 Dummy op monitor interval=0" on "hanode1" + Then Expected "WARNING: d3: interval in monitor should be larger than 0, advised is 10s" in stderr + When Run "crm configure primitive s2 ocf:pacemaker:Stateful op monitor role=Promoted interval=3s op monitor role=Unpromoted interval=3s" on "hanode1" + Then Expected "WARNING: s2: interval in monitor must be unique, advised is 11s" in stderr + When Run "crm configure primitive id=d4 Dummy op start timeout=10s" on "hanode1" + Then Expected "WARNING: d4: specified timeout 10s for start is smaller than the advised 20s" in stderr + + @clean + Scenario: trace ra with specific directory + When Run "crm resource trace d monitor" on "hanode1" + Then Expected "Trace for d:monitor is written to /var/lib/heartbeat/trace_ra/Dummy" in stdout + When Wait "10" seconds + Then Run "bash -c 'ls /var/lib/heartbeat/trace_ra/Dummy/d.monitor.*'" OK + When Run "crm resource untrace d" on "hanode1" + Then Expected "Stop tracing d" in stdout + When Run "crm resource trace d monitor /trace_log_d" on "hanode1" + Then Expected "Trace for d:monitor is written to /trace_log_d/Dummy" in stdout + When Wait "10" seconds + Then Run "bash -c 'ls /trace_log_d/Dummy/d.monitor.*'" OK + When Run "crm resource untrace d" on "hanode1" + Then Expected "Stop tracing d" in stdout + + @clean + Scenario: Add promotable=true and interleave=true automatically (bsc#1205522) + When Run "crm configure primitive s2 ocf:pacemaker:Stateful" on "hanode1" + And Run "crm configure clone p2 s2" on "hanode1" + Then Run "sleep 2;crm configure show|grep -A1 'clone p2 s2'|grep 'promotable=true interleave=true'" OK + When Run "crm configure primitive s3 ocf:pacemaker:Stateful" on "hanode1" + And Run "crm configure clone p3 s3 meta promotable=false" on "hanode1" + Then Run "sleep 2;crm configure show|grep -A1 'clone p3 s3'|grep 'promotable=false interleave=true'" OK + When Run "crm configure primitive d2 Dummy" on "hanode1" + And Run "crm configure clone p4 d2" on "hanode1" + Then Run "sleep 2;crm configure show|grep -A1 'clone p4 d2'|grep 'interleave=true'" OK + + @clean + Scenario: Run rsctest + When Run "crm resource stop d vip" on "hanode1" + When Run "crm configure rsctest d vip" on "hanode1" + Then Expected multiple lines in output + """ + INFO: Probing resources + INFO: Testing on hanode1: d vip + INFO: Testing on hanode2: d vip + """ |