From 9cb1c4df7b9ce1a9ad1312621b0f2b16a94fba3a Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Mon, 3 Jun 2024 15:54:25 +0200 Subject: Adding upstream version 060+5. Signed-off-by: Daniel Baumann --- modules.d/95iscsi/iscsiroot.sh | 322 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 322 insertions(+) create mode 100755 modules.d/95iscsi/iscsiroot.sh (limited to 'modules.d/95iscsi/iscsiroot.sh') diff --git a/modules.d/95iscsi/iscsiroot.sh b/modules.d/95iscsi/iscsiroot.sh new file mode 100755 index 0000000..b6af7f4 --- /dev/null +++ b/modules.d/95iscsi/iscsiroot.sh @@ -0,0 +1,322 @@ +#!/bin/sh +# +# This implementation is incomplete: Discovery mode is not implemented and +# the argument handling doesn't follow currently agreed formats. This is mainly +# because rfc4173 does not say anything about iscsi_initiator but open-iscsi's +# iscsistart needs this. +# + +type getarg > /dev/null 2>&1 || . /lib/dracut-lib.sh +type parse_iscsi_root > /dev/null 2>&1 || . /lib/net-lib.sh +type write_fs_tab > /dev/null 2>&1 || . /lib/fs-lib.sh + +PATH=/usr/sbin:/usr/bin:/sbin:/bin + +# Huh? Empty $1? +[ -z "$1" ] && exit 1 + +# Huh? Empty $2? +[ -z "$2" ] && exit 1 + +# Huh? Empty $3? This isn't really necessary, since NEWROOT isn't +# used here. But let's be consistent +[ -z "$3" ] && exit 1 + +# root is in the form root=iscsi:[]:[]:[]:[]: +netif="$1" +iroot="$2" + +# If it's not iscsi we don't continue +[ "${iroot%%:*}" = "iscsi" ] || exit 1 + +iroot=${iroot#iscsi} +iroot=${iroot#:} + +# XXX modprobe crc32c should go in the cmdline parser, but I haven't yet +# figured out a way how to check whether this is built-in or not +modprobe crc32c 2> /dev/null + +# start iscsiuio if needed +if [ -z "${DRACUT_SYSTEMD}" ] \ + && { [ -e /sys/module/bnx2i ] || [ -e /sys/module/qedi ]; } \ + && ! [ -e /tmp/iscsiuio-started ]; then + iscsiuio + : > /tmp/iscsiuio-started +fi + +handle_firmware() { + local ifaces retry _res + + # Depending on the 'ql4xdisablesysfsboot' qla4xxx + # will be autostarting sessions without presenting + # them via the firmware interface. + # In these cases 'iscsiadm -m fw' will fail, but + # the iSCSI sessions will still be present. + if ! iscsiadm -m fw; then + warn "iscsiadm: Could not get list of targets from firmware." + else + ifaces=$( + set -- /sys/firmware/ibft/ethernet* + echo $# + ) + read -r retry < /tmp/session-retry + + if [ "$retry" -lt "$ifaces" ]; then + retry=$((retry + 1)) + echo $retry > /tmp/session-retry + return 1 + else + rm /tmp/session-retry + fi + + # check to see if we have the new iscsiadm command, + # that supports the "no-wait" (-W) flag. If so, use it. + iscsiadm -m fw -l -W 2> /dev/null + _res=$? + if [ $_res -eq 7 ]; then + # ISCSI_ERR_INVALID (7) => "-W" not supported + info "iscsiadm does not support no-wait firmware logins" + iscsiadm -m fw -l + _res=$? + fi + if [ $_res -ne 0 ]; then + warn "iscsiadm: Log-in to iscsi target failed" + else + need_shutdown + fi + fi + [ -d /sys/class/iscsi_session ] || return 1 + echo 'started' > "/tmp/iscsistarted-iscsi:" + echo 'started' > "/tmp/iscsistarted-firmware" + + return 0 +} + +handle_netroot() { + local iscsi_initiator iscsi_target_name iscsi_target_ip iscsi_target_port + local iscsi_target_group iscsirw iscsi_lun + local iscsi_username iscsi_password + local iscsi_in_username iscsi_in_password + local iscsi_iface_name iscsi_netdev_name + local iscsi_param param + local p found + local login_retry_max_seen= + + # override conf settings by command line options + arg=$(getarg rd.iscsi.initiator -d iscsi_initiator=) + [ -n "$arg" ] && iscsi_initiator=$arg + arg=$(getarg rd.iscsi.target.group -d iscsi_target_group=) + [ -n "$arg" ] && iscsi_target_group=$arg + arg=$(getarg rd.iscsi.username -d iscsi_username=) + [ -n "$arg" ] && iscsi_username=$arg + arg=$(getarg rd.iscsi.password -d iscsi_password) + [ -n "$arg" ] && iscsi_password=$arg + arg=$(getarg rd.iscsi.in.username -d iscsi_in_username=) + [ -n "$arg" ] && iscsi_in_username=$arg + arg=$(getarg rd.iscsi.in.password -d iscsi_in_password=) + [ -n "$arg" ] && iscsi_in_password=$arg + for p in $(getargs rd.iscsi.param -d iscsi_param); do + [ "${p%=*}" = node.session.initial_login_retry_max ] \ + && login_retry_max_seen=yes + iscsi_param="$iscsi_param $p" + done + + # this sets iscsi_target_name and possibly overwrites most + # parameters read from the command line above + parse_iscsi_root "$1" || return 1 + + # Bail out early, if there is no route to the destination + if is_ip "$iscsi_target_ip" && [ "$netif" != "timeout" ] && ! all_ifaces_setup && getargbool 1 rd.iscsi.testroute; then + ip route get "$iscsi_target_ip" > /dev/null 2>&1 || return 0 + fi + + #limit iscsistart login retries + if [ "$login_retry_max_seen" != yes ]; then + retries=$(getargnum 3 0 10000 rd.iscsi.login_retry_max) + if [ "$retries" -gt 0 ]; then + iscsi_param="${iscsi_param% } node.session.initial_login_retry_max=$retries" + fi + fi + + # XXX is this needed? + getarg ro && iscsirw=ro + getarg rw && iscsirw=rw + fsopts=${fsopts:+$fsopts,}${iscsirw} + + if [ -z "$iscsi_initiator" ] && [ -f /sys/firmware/ibft/initiator/initiator-name ] && ! [ -f /tmp/iscsi_set_initiator ]; then + iscsi_initiator=$(while read -r line || [ -n "$line" ]; do echo "$line"; done < /sys/firmware/ibft/initiator/initiator-name) + echo "InitiatorName=$iscsi_initiator" > /run/initiatorname.iscsi + rm -f /etc/iscsi/initiatorname.iscsi + mkdir -p /etc/iscsi + ln -fs /run/initiatorname.iscsi /etc/iscsi/initiatorname.iscsi + : > /tmp/iscsi_set_initiator + if [ -n "$DRACUT_SYSTEMD" ]; then + systemctl try-restart iscsid + # FIXME: iscsid is not yet ready, when the service is :-/ + sleep 1 + fi + fi + + if [ -z "$iscsi_initiator" ]; then + [ -f /run/initiatorname.iscsi ] && . /run/initiatorname.iscsi + [ -f /etc/initiatorname.iscsi ] && . /etc/initiatorname.iscsi + [ -f /etc/iscsi/initiatorname.iscsi ] && . /etc/iscsi/initiatorname.iscsi + iscsi_initiator=$InitiatorName + fi + + if [ -z "$iscsi_initiator" ]; then + iscsi_initiator=$(iscsi-iname) + echo "InitiatorName=$iscsi_initiator" > /run/initiatorname.iscsi + rm -f /etc/iscsi/initiatorname.iscsi + mkdir -p /etc/iscsi + ln -fs /run/initiatorname.iscsi /etc/iscsi/initiatorname.iscsi + : > /tmp/iscsi_set_initiator + if [ -n "$DRACUT_SYSTEMD" ]; then + systemctl try-restart iscsid + # FIXME: iscsid is not yet ready, when the service is :-/ + sleep 1 + fi + fi + + if [ -z "$iscsi_target_port" ]; then + iscsi_target_port=3260 + fi + + if [ -z "$iscsi_target_group" ]; then + iscsi_target_group=1 + fi + + if [ -z "$iscsi_lun" ]; then + iscsi_lun=0 + fi + + echo "InitiatorName=$iscsi_initiator" > /run/initiatorname.iscsi + ln -fs /run/initiatorname.iscsi /dev/.initiatorname.iscsi + if ! [ -e /etc/iscsi/initiatorname.iscsi ]; then + mkdir -p /etc/iscsi + ln -fs /run/initiatorname.iscsi /etc/iscsi/initiatorname.iscsi + if [ -n "$DRACUT_SYSTEMD" ]; then + systemctl try-restart iscsid + # FIXME: iscsid is not yet ready, when the service is :-/ + sleep 1 + fi + fi + + if [ -z "$DRACUT_SYSTEMD" ]; then + iscsid + sleep 2 + fi + + # FIXME $iscsi_protocol?? + + if [ "$root" = "dhcp" ] || [ "$netroot" = "dhcp" ]; then + # if root is not specified try to mount the whole iSCSI LUN + printf 'SYMLINK=="disk/by-path/*-iscsi-*-%s", SYMLINK+="root"\n' "$iscsi_lun" >> /etc/udev/rules.d/99-iscsi-root.rules + udevadm control --reload + write_fs_tab /dev/root + wait_for_dev -n /dev/root + + # install mount script + [ -z "$DRACUT_SYSTEMD" ] \ + && echo "iscsi_lun=$iscsi_lun . /bin/mount-lun.sh " > "$hookdir"/mount/01-$$-iscsi.sh + fi + + if strglobin "$iscsi_target_ip" '*:*:*' && ! strglobin "$iscsi_target_ip" '['; then + iscsi_target_ip="[$iscsi_target_ip]" + fi + targets=$(iscsiadm -m discovery -t st -p "$iscsi_target_ip":${iscsi_target_port:+$iscsi_target_port} | { + while read -r _ target _ || [ -n "$target" ]; do + echo "$target" + done + }) + [ -z "$targets" ] && warn "Target discovery to $iscsi_target_ip:${iscsi_target_port:+$iscsi_target_port} failed with status $?" && return 1 + + found= + for target in $targets; do + if [ "$target" = "$iscsi_target_name" ]; then + if [ -n "$iscsi_iface_name" ]; then + iscsiadm -m iface -I "$iscsi_iface_name" --op=new + EXTRA=" ${iscsi_netdev_name:+--name=iface.net_ifacename --value=$iscsi_netdev_name} " + EXTRA="$EXTRA ${iscsi_initiator:+--name=iface.initiatorname --value=$iscsi_initiator} " + fi + [ -n "$iscsi_param" ] && for param in $iscsi_param; do EXTRA="$EXTRA --name=${param%=*} --value=${param#*=}"; done + + CMD="iscsiadm -m node -T $target \ + ${iscsi_iface_name:+-I $iscsi_iface_name} \ + -p $iscsi_target_ip${iscsi_target_port:+:$iscsi_target_port}" + __op="--op=update \ + --name=node.startup --value=onboot \ + ${iscsi_username:+ --name=node.session.auth.username --value=$iscsi_username} \ + ${iscsi_password:+ --name=node.session.auth.password --value=$iscsi_password} \ + ${iscsi_in_username:+--name=node.session.auth.username_in --value=$iscsi_in_username} \ + ${iscsi_in_password:+--name=node.session.auth.password_in --value=$iscsi_in_password} \ + $EXTRA" + # shellcheck disable=SC2086 + $CMD $__op + if [ "$netif" != "timeout" ]; then + $CMD --login + fi + found=yes + break + fi + done + + if [ "$netif" = "timeout" ]; then + iscsiadm -m node -L onboot || : + elif [ "$found" != yes ]; then + warn "iSCSI target \"$iscsi_target_name\" not found on portal $iscsi_target_ip:$iscsi_target_port" + return 1 + fi + : > "$hookdir"/initqueue/work + + netroot_enc=$(str_replace "$1" '/' '\2f') + echo 'started' > "/tmp/iscsistarted-iscsi:${netroot_enc}" + return 0 +} + +ret=0 + +if [ "$netif" != "timeout" ] && getargbool 0 rd.iscsi.waitnet; then + all_ifaces_setup || exit 0 +fi + +if [ "$netif" = "timeout" ] && all_ifaces_setup; then + # s.th. went wrong and the timeout script hits + # restart + systemctl restart iscsid + # damn iscsid is not ready after unit says it's ready + sleep 2 +fi + +if getargbool 0 rd.iscsi.firmware -d -y iscsi_firmware; then + if [ "$netif" = "timeout" ] || [ "$netif" = "online" ] || [ "$netif" = "dummy" ]; then + [ -f /tmp/session-retry ] || echo 1 > /tmp/session-retry + handle_firmware + ret=$? + fi +fi + +if ! [ "$netif" = "online" ]; then + # loop over all netroot parameter + if nroot=$(getarg netroot) && [ "$nroot" != "dhcp" ]; then + for nroot in $(getargs netroot); do + [ "${nroot%%:*}" = "iscsi" ] || continue + nroot="${nroot##iscsi:}" + if [ -n "$nroot" ]; then + handle_netroot "$nroot" + ret=$((ret + $?)) + fi + done + else + if [ -n "$iroot" ]; then + handle_netroot "$iroot" + ret=$? + fi + fi +fi + +need_shutdown + +# now we have a root filesystem somewhere in /dev/sd* +# let the normal block handler handle root= +exit $ret -- cgit v1.2.3