#!/bin/sh

PATH=/usr/sbin:/usr/bin:/sbin:/bin

type getarg > /dev/null 2>&1 || . /lib/dracut-lib.sh
type ip_to_var > /dev/null 2>&1 || . /lib/net-lib.sh

# We already need a set netif here
netif=$interface

setup_interface() {
    ip=$new_ip_address
    mtu=$new_interface_mtu
    mask=$new_subnet_mask
    bcast=$new_broadcast_address
    gw=${new_routers%%,*}
    domain=$new_domain_name
    # get rid of control chars
    search=$(printf -- "%s" "$new_domain_search" | tr -d '[:cntrl:]')
    namesrv=$new_domain_name_servers
    hostname=$new_host_name
    [ -n "$new_dhcp_lease_time" ] && lease_time=$new_dhcp_lease_time
    [ -n "$new_max_life" ] && lease_time=$new_max_life
    preferred_lft=$lease_time
    [ -n "$new_preferred_life" ] && preferred_lft=$new_preferred_life

    # shellcheck disable=SC1090
    [ -f /tmp/net."$netif".override ] && . /tmp/net."$netif".override

    # Taken from debian dhclient-script:
    # The 576 MTU is only used for X.25 and dialup connections
    # where the admin wants low latency.  Such a low MTU can cause
    # problems with UDP traffic, among other things.  As such,
    # disallow MTUs from 576 and below by default, so that broken
    # MTUs are ignored, but higher stuff is allowed (1492, 1500, etc).
    if [ -n "$mtu" ] && [ "$mtu" -gt 576 ]; then
        if ! ip link set "$netif" mtu "$mtu"; then
            ip link set "$netif" down
            ip link set "$netif" mtu "$mtu"
            linkup "$netif"
        fi
    fi

    ip addr add "$ip"${mask:+/$mask} ${bcast:+broadcast $bcast} dev "$netif" \
        ${lease_time:+valid_lft $lease_time} \
        ${preferred_lft:+preferred_lft ${preferred_lft}}

    if [ -n "$gw" ]; then
        if [ "$mask" = "255.255.255.255" ]; then
            # point-to-point connection => set explicit route to gateway
            echo ip route add "$gw" dev "$netif" > /tmp/net."$netif".gw
        fi

        echo "$gw" | {
            IFS=' ' read -r main_gw other_gw
            echo ip route replace default via "$main_gw" dev "$netif" >> /tmp/net."$netif".gw
            if [ -n "$other_gw" ]; then
                for g in $other_gw; do
                    echo ip route add default via "$g" dev "$netif" >> /tmp/net."$netif".gw
                done
            fi
        }
    fi

    if getargbool 1 rd.peerdns; then
        [ -n "${search}${domain}" ] && echo "search $search $domain" > /tmp/net."$netif".resolv.conf
        if [ -n "$namesrv" ]; then
            for s in $namesrv; do
                echo nameserver "$s"
            done
        fi >> /tmp/net."$netif".resolv.conf
    fi
    # Note: hostname can be fqdn OR short hostname, so chop off any
    # trailing domain name and explicitly add any domain if set.
    [ -n "$hostname" ] && echo "echo ${hostname%."$domain"}${domain:+.$domain} > /proc/sys/kernel/hostname" > /tmp/net."$netif".hostname
}

setup_interface6() {
    domain=$new_domain_name
    # get rid of control chars
    search=$(printf -- "%s" "$new_dhcp6_domain_search" | tr -d '[:cntrl:]')
    namesrv=$new_dhcp6_name_servers
    hostname=$new_host_name
    [ -n "$new_dhcp_lease_time" ] && lease_time=$new_dhcp_lease_time
    [ -n "$new_max_life" ] && lease_time=$new_max_life
    preferred_lft=$lease_time
    [ -n "$new_preferred_life" ] && preferred_lft=$new_preferred_life

    # shellcheck disable=SC1090
    [ -f /tmp/net."$netif".override ] && . /tmp/net."$netif".override

    ip -6 addr add "${new_ip6_address}"/"${new_ip6_prefixlen}" \
        dev "${netif}" scope global \
        ${lease_time:+valid_lft $lease_time} \
        ${preferred_lft:+preferred_lft ${preferred_lft}}

    if getargbool 1 rd.peerdns; then
        [ -n "${search}${domain}" ] && echo "search $search $domain" > /tmp/net."$netif".resolv.conf
        if [ -n "$namesrv" ]; then
            for s in $namesrv; do
                echo nameserver "$s"
            done
        fi >> /tmp/net."$netif".resolv.conf
    fi

    # Note: hostname can be fqdn OR short hostname, so chop off any
    # trailing domain name and explicitly add any domain if set.
    [ -n "$hostname" ] && echo "echo ${hostname%."$domain"}${domain:+.$domain} > /proc/sys/kernel/hostname" > /tmp/net."$netif".hostname
}

parse_option_121() {
    while [ $# -ne 0 ]; do
        mask="$1"
        shift

        # Is the destination a multicast group?
        if [ "$1" -ge 224 ] && [ "$1" -lt 240 ]; then
            multicast=1
        else
            multicast=0
        fi

        # Parse the arguments into a CIDR net/mask string
        if [ "$mask" -gt 24 ]; then
            destination="$1.$2.$3.$4/$mask"
            shift
            shift
            shift
            shift
        elif [ "$mask" -gt 16 ]; then
            destination="$1.$2.$3.0/$mask"
            shift
            shift
            shift
        elif [ "$mask" -gt 8 ]; then
            destination="$1.$2.0.0/$mask"
            shift
            shift
        elif [ "$mask" -gt 0 ]; then
            destination="$1.0.0.0/$mask"
            shift
        else
            destination="0.0.0.0/$mask"
        fi

        # Read the gateway
        gateway="$1.$2.$3.$4"
        shift
        shift
        shift
        shift

        # Multicast routing on Linux
        #  - If you set a next-hop address for a multicast group, this breaks with Cisco switches
        #  - If you simply leave it link-local and attach it to an interface, it works fine.
        if [ $multicast -eq 1 ] || [ "$gateway" = "0.0.0.0" ]; then
            temp_result="$destination dev $interface"
        else
            temp_result="$destination via $gateway dev $interface"
        fi

        echo "/sbin/ip route replace $temp_result"
    done
}

case $reason in
    PREINIT)
        echo "dhcp: PREINIT $netif up"
        linkup "$netif"
        ;;

    PREINIT6)
        echo "dhcp: PREINIT6 $netif up"
        linkup "$netif"
        wait_for_ipv6_dad_link "$netif"
        ;;

    BOUND)
        echo "dhcp: BOUND setting up $netif"
        unset layer2
        if [ -f /sys/class/net/"$netif"/device/layer2 ]; then
            read -r layer2 < /sys/class/net/"$netif"/device/layer2
        fi
        if [ "$layer2" != "0" ]; then
            if command -v arping2 > /dev/null; then
                if arping2 -q -C 1 -c 2 -I "$netif" -0 "$new_ip_address"; then
                    warn "Duplicate address detected for $new_ip_address while doing dhcp. retrying"
                    exit 1
                fi
            else
                if ! arping -f -q -D -c 2 -I "$netif" "$new_ip_address"; then
                    warn "Duplicate address detected for $new_ip_address while doing dhcp. retrying"
                    exit 1
                fi
            fi
        fi
        unset layer2
        setup_interface
        set | while read -r line || [ -n "$line" ]; do
            [ "${line#new_}" = "$line" ] && continue
            echo "$line"
        done > /tmp/dhclient."$netif".dhcpopts

        {
            echo '. /lib/net-lib.sh'
            echo "setup_net $netif"
            if [ -n "$new_classless_static_routes" ]; then
                OLDIFS="$IFS"
                IFS=".$IFS"
                parse_option_121 "$new_classless_static_routes"
                IFS="$OLDIFS"
            fi
            echo "source_hook initqueue/online $netif"
            [ -e /tmp/net."$netif".manualup ] || echo "/sbin/netroot $netif"
            echo "rm -f -- $hookdir/initqueue/setup_net_$netif.sh"
        } > "$hookdir"/initqueue/setup_net_"$netif".sh

        echo "[ -f /tmp/net.$netif.did-setup ]" > "$hookdir"/initqueue/finished/dhclient-"$netif".sh
        : > /tmp/net."$netif".up
        if [ -e /sys/class/net/"${netif}"/address ]; then
            : > "/tmp/net.$(cat /sys/class/net/"${netif}"/address).up"
        fi

        ;;

    RENEW | REBIND)
        unset lease_time
        [ -n "$new_dhcp_lease_time" ] && lease_time=$new_dhcp_lease_time
        [ -n "$new_max_life" ] && lease_time=$new_max_life
        preferred_lft=$lease_time
        [ -n "$new_preferred_life" ] && preferred_lft=$new_preferred_life
        ip -4 addr change "${new_ip_address}"/"${new_subnet_mask}" broadcast "${new_broadcast_address}" dev "${interface}" \
            ${lease_time:+valid_lft $lease_time} ${preferred_lft:+preferred_lft ${preferred_lft}} \
            > /dev/null 2>&1
        ;;

    BOUND6)
        echo "dhcp: BOUND6 setting up $netif"
        setup_interface6

        set | while read -r line || [ -n "$line" ]; do
            [ "${line#new_}" = "$line" ] && continue
            echo "$line"
        done > /tmp/dhclient."$netif".dhcpopts

        {
            echo '. /lib/net-lib.sh'
            echo "setup_net $netif"
            echo "source_hook initqueue/online $netif"
            [ -e /tmp/net."$netif".manualup ] || echo "/sbin/netroot $netif"
            echo "rm -f -- $hookdir/initqueue/setup_net_$netif.sh"
        } > "$hookdir"/initqueue/setup_net_"$netif".sh

        echo "[ -f /tmp/net.$netif.did-setup ]" > "$hookdir"/initqueue/finished/dhclient-"$netif".sh
        : > /tmp/net."$netif".up
        if [ -e /sys/class/net/"${netif}"/address ]; then
            : > "/tmp/net.$(cat /sys/class/net/"${netif}"/address).up"
        fi
        ;;

    RENEW6 | REBIND6)
        unset lease_time
        [ -n "$new_dhcp_lease_time" ] && lease_time=$new_dhcp_lease_time
        [ -n "$new_max_life" ] && lease_time=$new_max_life
        preferred_lft=$lease_time
        [ -n "$new_preferred_life" ] && preferred_lft=$new_preferred_life
        ip -6 addr change "${new_ip6_address}"/"${new_ip6_prefixlen}" dev "${interface}" scope global \
            ${lease_time:+valid_lft $lease_time} ${preferred_lft:+preferred_lft ${preferred_lft}} \
            > /dev/null 2>&1
        ;;

    *) echo "dhcp: $reason" ;;
esac

exit 0