fence_ibmblade is an I/O Fencing agent which can be used with IBM BladeCenter chassis. It issues SNMP Set request to BladeCenter chassis, rebooting, powering up or down the specified Blade Server. http://www.ibm.com Fencing action Set the community string IP address or hostname of fencing device IP address or hostname of fencing device TCP/UDP port to use for connection with device Login name Login password or passphrase Script to run to retrieve password Login password or passphrase Script to run to retrieve password Physical plug number on device, UUID or identification of machine Physical plug number on device, UUID or identification of machine Set authentication protocol Set privacy protocol password Script to run to retrieve privacy password Set privacy protocol Set security level Specifies SNMP version to use Login name Disable logging to stderr. Does not affect --verbose or --debug-file or logging to syslog. Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to increase verbosity. Level of debugging detail in output. Defaults to the number of --verbose flags specified on the command line, or to 1 if verbose=1 in a stonith device configuration (i.e., on stdin). Write debug information to given file Write debug information to given file Display version information and exit Display help and exit Separator for plug parameter when specifying more than 1 plug Separator for CSV created by 'list' operation Wait X seconds before fencing is started Disable timeout (true/false) (default: true when run from Pacemaker 2.0+) Wait X seconds for cmd prompt after login Test X seconds for status change after ON/OFF Wait X seconds after issuing ON/OFF Wait X seconds for cmd prompt after issuing command Sleep X seconds between status calls during a STONITH action Count of attempts to retry power on Path to snmpget binary Path to snmpset binary Path to snmpwalk binary