1 files changed, 301 insertions, 0 deletions
diff --git a/install-sh b/install-sh
new file mode 100755
index 0000000..b12c0f7
--- /dev/null
+++ b/install-sh
@@ -0,0 +1,301 @@
+#!/bin/sh
+#
+# $NetBSD: install-sh.in,v 1.6 2012/01/11 13:07:31 hans Exp $
+# This script now also installs multiple files, but might choke on installing
+# multiple files with spaces in the file names.
+#
+# install - install a program, script, or datafile
+# This comes from X11R5 (mit/util/scripts/install.sh).
+#
+# Copyright 1991 by the Massachusetts Institute of Technology
+#
+# Permission to use, copy, modify, distribute, and sell this software and its
+# documentation for any purpose is hereby granted without fee, provided that
+# the above copyright notice appear in all copies and that both that
+# copyright notice and this permission notice appear in supporting
+# documentation, and that the name of M.I.T. not be used in advertising or
+# publicity pertaining to distribution of the software without specific,
+# written prior permission.  M.I.T. makes no representations about the
+# suitability of this software for any purpose.  It is provided "as is"
+# without express or implied warranty.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+awkprog="${AWKPROG-awk}"
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+instcmd="$cpprog"
+instflags=""
+pathcompchmodcmd="$chmodprog 755"
+chmodcmd="$chmodprog 755"
+chowncmd=""
+chgrpcmd=""
+stripcmd=""
+stripflags=""
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=""
+msrc=""
+dst=""
+dir_arg=""
+suffix=""
+suffixfmt=""
+
+while [ x"$1" != x ]; do
+    case $1 in
+	-b) suffix=".old"
+	    shift
+	    continue;;
+
+	-B) suffixfmt="$2"
+	    shift
+	    shift
+	    continue;;
+
+	-c) instcmd="$cpprog"
+	    shift
+	    continue;;
+
+	-d) dir_arg=true
+	    shift
+	    continue;;
+
+	-m) chmodcmd="$chmodprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-m*)
+	    chmodcmd="$chmodprog ${1#-m}"
+	    shift
+	    continue;;
+
+	-o) chowncmd="$chownprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-g) chgrpcmd="$chgrpprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-s) stripcmd="$stripprog"
+	    shift
+	    continue;;
+
+	-S) stripcmd="$stripprog"
+	    stripflags="-S $2 $stripflags"
+	    shift
+	    shift
+	    continue;;
+
+	-p) instflags="-p"
+	    shift
+	    continue;;
+
+	*)  if [ x"$msrc" = x ]
+	    then
+		msrc="$dst"
+	    else
+		msrc="$msrc $dst"
+	    fi
+	    src="$dst"
+	    dst="$1"
+	    shift
+	    continue;;
+    esac
+done
+
+if [ x"$dir_arg" = x ]
+then
+	dstisfile=""
+	if [ ! -d "$dst" ]
+	then
+		if [ x"$msrc" = x"$src" ]
+		then
+			dstisfile=true
+		else
+			echo "install: destination is not a directory"
+			exit 1
+		fi
+	fi
+else
+	msrc="$msrc $dst"
+fi
+
+if [ x"$msrc" = x ]
+then
+	echo "install: no destination specified"
+	exit 1
+fi      
+
+for srcarg in $msrc; do
+
+if [ x"$dir_arg" != x ]; then
+
+	dstarg="$srcarg"
+else
+	dstarg="$dst"
+
+# Waiting for this to be detected by the "$instcmd $srcarg $dsttmp" command
+# might cause directories to be created, which would be especially bad 
+# if $src (and thus $dsttmp) contains '*'.
+
+	if [ -f "$srcarg" ]
+	then
+		doinst="$instcmd $instflags"
+	elif [ -d "$srcarg" ]
+	then
+		echo "install: $srcarg: not a regular file"
+		exit 1
+	elif [ "$srcarg" = "/dev/null" ]
+	then
+		doinst="$cpprog"
+	else
+		echo "install:  $srcarg does not exist"
+		exit 1
+	fi
+	
+# If destination is a directory, append the input filename; if your system
+# does not like double slashes in filenames, you may need to add some logic
+
+	if [ -d "$dstarg" ]
+	then
+		dstarg="$dstarg"/`basename "$srcarg"`
+	fi
+fi
+
+## this sed command emulates the dirname command
+dstdir=`echo "$dstarg" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+
+# Make sure that the destination directory exists.
+#  this part is taken from Noah Friedman's mkinstalldirs script
+
+# Skip lots of stat calls in the usual case.
+if [ ! -d "$dstdir" ]; then
+defaultIFS='	
+'
+IFS="${IFS-${defaultIFS}}"
+
+oIFS="${IFS}"
+# Some sh's can't handle IFS=/ for some reason.
+IFS='%'
+set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
+IFS="${oIFS}"
+
+pathcomp=''
+
+while [ $# -ne 0 ] ; do
+	pathcomp="${pathcomp}${1}"
+	shift
+
+	if [ ! -d "${pathcomp}" ] ;
+        then
+		$doit $mkdirprog "${pathcomp}"
+        	if [ x"$chowncmd" != x ]; then $doit $chowncmd "${pathcomp}"; else true ; fi &&
+        	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "${pathcomp}"; else true ; fi &&
+        	if [ x"$pathcompchmodcmd" != x ]; then $doit $pathcompchmodcmd "${pathcomp}"; else true ; fi
+
+	else
+		true
+	fi
+
+	pathcomp="${pathcomp}/"
+done
+fi
+
+	if [ x"$dir_arg" != x ]
+	then
+		if [ -d "$dstarg" ]; then
+			true
+		else
+			$doit $mkdirprog "$dstarg" &&
+
+			if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dstarg"; else true ; fi &&
+			if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dstarg"; else true ; fi &&
+			if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dstarg"; else true ; fi
+		fi
+	else
+
+		if [ x"$dstisfile" = x ]
+		then
+			file=$srcarg
+		else
+			file=$dst
+		fi
+
+		dstfile=`basename "$file"`
+		dstfinal="$dstdir/$dstfile"
+
+# Make a temp file name in the proper directory.
+
+		dsttmp=$dstdir/#inst.$$#
+
+# Make a backup file name in the proper directory.
+		case x$suffixfmt in
+		*%*)	suffix=`echo x |
+			$awkprog -v bname="$dstfinal" -v fmt="$suffixfmt" '
+			{ cnt = 0;
+			  do {
+				sfx = sprintf(fmt, cnt++);
+				name = bname sfx;
+			  } while (system("test -f " name) == 0);
+			  print sfx; }' -`;;
+		x)	;;
+		*)	suffix="$suffixfmt";;
+		esac
+		dstbackup="$dstfinal$suffix"
+
+# Move or copy the file name to the temp name
+
+		$doit $doinst $srcarg "$dsttmp" &&
+
+		trap "rm -f ${dsttmp}" 0 &&
+
+# and set any options; do chmod last to preserve setuid bits
+
+# If any of these fail, we abort the whole thing.  If we want to
+# ignore errors from any of these, just make sure not to ignore
+# errors from the above "$doit $instcmd $src $dsttmp" command.
+
+		if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dsttmp"; else true;fi &&
+		if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dsttmp"; else true;fi &&
+		if [ x"$stripcmd" != x ]; then $doit $stripcmd $stripflags "$dsttmp"; else true;fi &&
+		if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dsttmp"; else true;fi &&
+
+# Now rename the file to the real destination.
+
+		if [ x"$suffix" != x ] && [ -f "$dstfinal" ]
+		then
+			$doit $mvcmd "$dstfinal" "$dstbackup"
+		else
+			$doit $rmcmd -f "$dstfinal"
+		fi &&
+		$doit $mvcmd "$dsttmp" "$dstfinal"
+	fi
+
+done &&
+
+
+exit 0