diff options
Diffstat (limited to 'media/libopus/include/opus_multistream.h')
| -rw-r--r-- | media/libopus/include/opus_multistream.h | 660 |
1 files changed, 660 insertions, 0 deletions
diff --git a/media/libopus/include/opus_multistream.h b/media/libopus/include/opus_multistream.h new file mode 100644 index 0000000000..babcee6905 --- /dev/null +++ b/media/libopus/include/opus_multistream.h @@ -0,0 +1,660 @@ +/* Copyright (c) 2011 Xiph.Org Foundation + Written by Jean-Marc Valin */ +/* + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER + OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +*/ + +/** + * @file opus_multistream.h + * @brief Opus reference implementation multistream API + */ + +#ifndef OPUS_MULTISTREAM_H +#define OPUS_MULTISTREAM_H + +#include "opus.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/** @cond OPUS_INTERNAL_DOC */ + +/** Macros to trigger compilation errors when the wrong types are provided to a + * CTL. */ +/**@{*/ +#define __opus_check_encstate_ptr(ptr) ((ptr) + ((ptr) - (OpusEncoder**)(ptr))) +#define __opus_check_decstate_ptr(ptr) ((ptr) + ((ptr) - (OpusDecoder**)(ptr))) +/**@}*/ + +/** These are the actual encoder and decoder CTL ID numbers. + * They should not be used directly by applications. + * In general, SETs should be even and GETs should be odd.*/ +/**@{*/ +#define OPUS_MULTISTREAM_GET_ENCODER_STATE_REQUEST 5120 +#define OPUS_MULTISTREAM_GET_DECODER_STATE_REQUEST 5122 +/**@}*/ + +/** @endcond */ + +/** @defgroup opus_multistream_ctls Multistream specific encoder and decoder CTLs + * + * These are convenience macros that are specific to the + * opus_multistream_encoder_ctl() and opus_multistream_decoder_ctl() + * interface. + * The CTLs from @ref opus_genericctls, @ref opus_encoderctls, and + * @ref opus_decoderctls may be applied to a multistream encoder or decoder as + * well. + * In addition, you may retrieve the encoder or decoder state for an specific + * stream via #OPUS_MULTISTREAM_GET_ENCODER_STATE or + * #OPUS_MULTISTREAM_GET_DECODER_STATE and apply CTLs to it individually. + */ +/**@{*/ + +/** Gets the encoder state for an individual stream of a multistream encoder. + * @param[in] x <tt>opus_int32</tt>: The index of the stream whose encoder you + * wish to retrieve. + * This must be non-negative and less than + * the <code>streams</code> parameter used + * to initialize the encoder. + * @param[out] y <tt>OpusEncoder**</tt>: Returns a pointer to the given + * encoder state. + * @retval OPUS_BAD_ARG The index of the requested stream was out of range. + * @hideinitializer + */ +#define OPUS_MULTISTREAM_GET_ENCODER_STATE(x,y) OPUS_MULTISTREAM_GET_ENCODER_STATE_REQUEST, __opus_check_int(x), __opus_check_encstate_ptr(y) + +/** Gets the decoder state for an individual stream of a multistream decoder. + * @param[in] x <tt>opus_int32</tt>: The index of the stream whose decoder you + * wish to retrieve. + * This must be non-negative and less than + * the <code>streams</code> parameter used + * to initialize the decoder. + * @param[out] y <tt>OpusDecoder**</tt>: Returns a pointer to the given + * decoder state. + * @retval OPUS_BAD_ARG The index of the requested stream was out of range. + * @hideinitializer + */ +#define OPUS_MULTISTREAM_GET_DECODER_STATE(x,y) OPUS_MULTISTREAM_GET_DECODER_STATE_REQUEST, __opus_check_int(x), __opus_check_decstate_ptr(y) + +/**@}*/ + +/** @defgroup opus_multistream Opus Multistream API + * @{ + * + * The multistream API allows individual Opus streams to be combined into a + * single packet, enabling support for up to 255 channels. Unlike an + * elementary Opus stream, the encoder and decoder must negotiate the channel + * configuration before the decoder can successfully interpret the data in the + * packets produced by the encoder. Some basic information, such as packet + * duration, can be computed without any special negotiation. + * + * The format for multistream Opus packets is defined in + * <a href="https://tools.ietf.org/html/rfc7845">RFC 7845</a> + * and is based on the self-delimited Opus framing described in Appendix B of + * <a href="https://tools.ietf.org/html/rfc6716">RFC 6716</a>. + * Normal Opus packets are just a degenerate case of multistream Opus packets, + * and can be encoded or decoded with the multistream API by setting + * <code>streams</code> to <code>1</code> when initializing the encoder or + * decoder. + * + * Multistream Opus streams can contain up to 255 elementary Opus streams. + * These may be either "uncoupled" or "coupled", indicating that the decoder + * is configured to decode them to either 1 or 2 channels, respectively. + * The streams are ordered so that all coupled streams appear at the + * beginning. + * + * A <code>mapping</code> table defines which decoded channel <code>i</code> + * should be used for each input/output (I/O) channel <code>j</code>. This table is + * typically provided as an unsigned char array. + * Let <code>i = mapping[j]</code> be the index for I/O channel <code>j</code>. + * If <code>i < 2*coupled_streams</code>, then I/O channel <code>j</code> is + * encoded as the left channel of stream <code>(i/2)</code> if <code>i</code> + * is even, or as the right channel of stream <code>(i/2)</code> if + * <code>i</code> is odd. Otherwise, I/O channel <code>j</code> is encoded as + * mono in stream <code>(i - coupled_streams)</code>, unless it has the special + * value 255, in which case it is omitted from the encoding entirely (the + * decoder will reproduce it as silence). Each value <code>i</code> must either + * be the special value 255 or be less than <code>streams + coupled_streams</code>. + * + * The output channels specified by the encoder + * should use the + * <a href="https://www.xiph.org/vorbis/doc/Vorbis_I_spec.html#x1-810004.3.9">Vorbis + * channel ordering</a>. A decoder may wish to apply an additional permutation + * to the mapping the encoder used to achieve a different output channel + * order (e.g. for outputing in WAV order). + * + * Each multistream packet contains an Opus packet for each stream, and all of + * the Opus packets in a single multistream packet must have the same + * duration. Therefore the duration of a multistream packet can be extracted + * from the TOC sequence of the first stream, which is located at the + * beginning of the packet, just like an elementary Opus stream: + * + * @code + * int nb_samples; + * int nb_frames; + * nb_frames = opus_packet_get_nb_frames(data, len); + * if (nb_frames < 1) + * return nb_frames; + * nb_samples = opus_packet_get_samples_per_frame(data, 48000) * nb_frames; + * @endcode + * + * The general encoding and decoding process proceeds exactly the same as in + * the normal @ref opus_encoder and @ref opus_decoder APIs. + * See their documentation for an overview of how to use the corresponding + * multistream functions. + */ + +/** Opus multistream encoder state. + * This contains the complete state of a multistream Opus encoder. + * It is position independent and can be freely copied. + * @see opus_multistream_encoder_create + * @see opus_multistream_encoder_init + */ +typedef struct OpusMSEncoder OpusMSEncoder; + +/** Opus multistream decoder state. + * This contains the complete state of a multistream Opus decoder. + * It is position independent and can be freely copied. + * @see opus_multistream_decoder_create + * @see opus_multistream_decoder_init + */ +typedef struct OpusMSDecoder OpusMSDecoder; + +/**\name Multistream encoder functions */ +/**@{*/ + +/** Gets the size of an OpusMSEncoder structure. + * @param streams <tt>int</tt>: The total number of streams to encode from the + * input. + * This must be no more than 255. + * @param coupled_streams <tt>int</tt>: Number of coupled (2 channel) streams + * to encode. + * This must be no larger than the total + * number of streams. + * Additionally, The total number of + * encoded channels (<code>streams + + * coupled_streams</code>) must be no + * more than 255. + * @returns The size in bytes on success, or a negative error code + * (see @ref opus_errorcodes) on error. + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_multistream_encoder_get_size( + int streams, + int coupled_streams +); + +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_multistream_surround_encoder_get_size( + int channels, + int mapping_family +); + + +/** Allocates and initializes a multistream encoder state. + * Call opus_multistream_encoder_destroy() to release + * this object when finished. + * @param Fs <tt>opus_int32</tt>: Sampling rate of the input signal (in Hz). + * This must be one of 8000, 12000, 16000, + * 24000, or 48000. + * @param channels <tt>int</tt>: Number of channels in the input signal. + * This must be at most 255. + * It may be greater than the number of + * coded channels (<code>streams + + * coupled_streams</code>). + * @param streams <tt>int</tt>: The total number of streams to encode from the + * input. + * This must be no more than the number of channels. + * @param coupled_streams <tt>int</tt>: Number of coupled (2 channel) streams + * to encode. + * This must be no larger than the total + * number of streams. + * Additionally, The total number of + * encoded channels (<code>streams + + * coupled_streams</code>) must be no + * more than the number of input channels. + * @param[in] mapping <code>const unsigned char[channels]</code>: Mapping from + * encoded channels to input channels, as described in + * @ref opus_multistream. As an extra constraint, the + * multistream encoder does not allow encoding coupled + * streams for which one channel is unused since this + * is never a good idea. + * @param application <tt>int</tt>: The target encoder application. + * This must be one of the following: + * <dl> + * <dt>#OPUS_APPLICATION_VOIP</dt> + * <dd>Process signal for improved speech intelligibility.</dd> + * <dt>#OPUS_APPLICATION_AUDIO</dt> + * <dd>Favor faithfulness to the original input.</dd> + * <dt>#OPUS_APPLICATION_RESTRICTED_LOWDELAY</dt> + * <dd>Configure the minimum possible coding delay by disabling certain modes + * of operation.</dd> + * </dl> + * @param[out] error <tt>int *</tt>: Returns #OPUS_OK on success, or an error + * code (see @ref opus_errorcodes) on + * failure. + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT OpusMSEncoder *opus_multistream_encoder_create( + opus_int32 Fs, + int channels, + int streams, + int coupled_streams, + const unsigned char *mapping, + int application, + int *error +) OPUS_ARG_NONNULL(5); + +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT OpusMSEncoder *opus_multistream_surround_encoder_create( + opus_int32 Fs, + int channels, + int mapping_family, + int *streams, + int *coupled_streams, + unsigned char *mapping, + int application, + int *error +) OPUS_ARG_NONNULL(4) OPUS_ARG_NONNULL(5) OPUS_ARG_NONNULL(6); + +/** Initialize a previously allocated multistream encoder state. + * The memory pointed to by \a st must be at least the size returned by + * opus_multistream_encoder_get_size(). + * This is intended for applications which use their own allocator instead of + * malloc. + * To reset a previously initialized state, use the #OPUS_RESET_STATE CTL. + * @see opus_multistream_encoder_create + * @see opus_multistream_encoder_get_size + * @param st <tt>OpusMSEncoder*</tt>: Multistream encoder state to initialize. + * @param Fs <tt>opus_int32</tt>: Sampling rate of the input signal (in Hz). + * This must be one of 8000, 12000, 16000, + * 24000, or 48000. + * @param channels <tt>int</tt>: Number of channels in the input signal. + * This must be at most 255. + * It may be greater than the number of + * coded channels (<code>streams + + * coupled_streams</code>). + * @param streams <tt>int</tt>: The total number of streams to encode from the + * input. + * This must be no more than the number of channels. + * @param coupled_streams <tt>int</tt>: Number of coupled (2 channel) streams + * to encode. + * This must be no larger than the total + * number of streams. + * Additionally, The total number of + * encoded channels (<code>streams + + * coupled_streams</code>) must be no + * more than the number of input channels. + * @param[in] mapping <code>const unsigned char[channels]</code>: Mapping from + * encoded channels to input channels, as described in + * @ref opus_multistream. As an extra constraint, the + * multistream encoder does not allow encoding coupled + * streams for which one channel is unused since this + * is never a good idea. + * @param application <tt>int</tt>: The target encoder application. + * This must be one of the following: + * <dl> + * <dt>#OPUS_APPLICATION_VOIP</dt> + * <dd>Process signal for improved speech intelligibility.</dd> + * <dt>#OPUS_APPLICATION_AUDIO</dt> + * <dd>Favor faithfulness to the original input.</dd> + * <dt>#OPUS_APPLICATION_RESTRICTED_LOWDELAY</dt> + * <dd>Configure the minimum possible coding delay by disabling certain modes + * of operation.</dd> + * </dl> + * @returns #OPUS_OK on success, or an error code (see @ref opus_errorcodes) + * on failure. + */ +OPUS_EXPORT int opus_multistream_encoder_init( + OpusMSEncoder *st, + opus_int32 Fs, + int channels, + int streams, + int coupled_streams, + const unsigned char *mapping, + int application +) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(6); + +OPUS_EXPORT int opus_multistream_surround_encoder_init( + OpusMSEncoder *st, + opus_int32 Fs, + int channels, + int mapping_family, + int *streams, + int *coupled_streams, + unsigned char *mapping, + int application +) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(5) OPUS_ARG_NONNULL(6) OPUS_ARG_NONNULL(7); + +/** Encodes a multistream Opus frame. + * @param st <tt>OpusMSEncoder*</tt>: Multistream encoder state. + * @param[in] pcm <tt>const opus_int16*</tt>: The input signal as interleaved + * samples. + * This must contain + * <code>frame_size*channels</code> + * samples. + * @param frame_size <tt>int</tt>: Number of samples per channel in the input + * signal. + * This must be an Opus frame size for the + * encoder's sampling rate. + * For example, at 48 kHz the permitted values + * are 120, 240, 480, 960, 1920, and 2880. + * Passing in a duration of less than 10 ms + * (480 samples at 48 kHz) will prevent the + * encoder from using the LPC or hybrid modes. + * @param[out] data <tt>unsigned char*</tt>: Output payload. + * This must contain storage for at + * least \a max_data_bytes. + * @param [in] max_data_bytes <tt>opus_int32</tt>: Size of the allocated + * memory for the output + * payload. This may be + * used to impose an upper limit on + * the instant bitrate, but should + * not be used as the only bitrate + * control. Use #OPUS_SET_BITRATE to + * control the bitrate. + * @returns The length of the encoded packet (in bytes) on success or a + * negative error code (see @ref opus_errorcodes) on failure. + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_multistream_encode( + OpusMSEncoder *st, + const opus_int16 *pcm, + int frame_size, + unsigned char *data, + opus_int32 max_data_bytes +) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4); + +/** Encodes a multistream Opus frame from floating point input. + * @param st <tt>OpusMSEncoder*</tt>: Multistream encoder state. + * @param[in] pcm <tt>const float*</tt>: The input signal as interleaved + * samples with a normal range of + * +/-1.0. + * Samples with a range beyond +/-1.0 + * are supported but will be clipped by + * decoders using the integer API and + * should only be used if it is known + * that the far end supports extended + * dynamic range. + * This must contain + * <code>frame_size*channels</code> + * samples. + * @param frame_size <tt>int</tt>: Number of samples per channel in the input + * signal. + * This must be an Opus frame size for the + * encoder's sampling rate. + * For example, at 48 kHz the permitted values + * are 120, 240, 480, 960, 1920, and 2880. + * Passing in a duration of less than 10 ms + * (480 samples at 48 kHz) will prevent the + * encoder from using the LPC or hybrid modes. + * @param[out] data <tt>unsigned char*</tt>: Output payload. + * This must contain storage for at + * least \a max_data_bytes. + * @param [in] max_data_bytes <tt>opus_int32</tt>: Size of the allocated + * memory for the output + * payload. This may be + * used to impose an upper limit on + * the instant bitrate, but should + * not be used as the only bitrate + * control. Use #OPUS_SET_BITRATE to + * control the bitrate. + * @returns The length of the encoded packet (in bytes) on success or a + * negative error code (see @ref opus_errorcodes) on failure. + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_multistream_encode_float( + OpusMSEncoder *st, + const float *pcm, + int frame_size, + unsigned char *data, + opus_int32 max_data_bytes +) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4); + +/** Frees an <code>OpusMSEncoder</code> allocated by + * opus_multistream_encoder_create(). + * @param st <tt>OpusMSEncoder*</tt>: Multistream encoder state to be freed. + */ +OPUS_EXPORT void opus_multistream_encoder_destroy(OpusMSEncoder *st); + +/** Perform a CTL function on a multistream Opus encoder. + * + * Generally the request and subsequent arguments are generated by a + * convenience macro. + * @param st <tt>OpusMSEncoder*</tt>: Multistream encoder state. + * @param request This and all remaining parameters should be replaced by one + * of the convenience macros in @ref opus_genericctls, + * @ref opus_encoderctls, or @ref opus_multistream_ctls. + * @see opus_genericctls + * @see opus_encoderctls + * @see opus_multistream_ctls + */ +OPUS_EXPORT int opus_multistream_encoder_ctl(OpusMSEncoder *st, int request, ...) OPUS_ARG_NONNULL(1); + +/**@}*/ + +/**\name Multistream decoder functions */ +/**@{*/ + +/** Gets the size of an <code>OpusMSDecoder</code> structure. + * @param streams <tt>int</tt>: The total number of streams coded in the + * input. + * This must be no more than 255. + * @param coupled_streams <tt>int</tt>: Number streams to decode as coupled + * (2 channel) streams. + * This must be no larger than the total + * number of streams. + * Additionally, The total number of + * coded channels (<code>streams + + * coupled_streams</code>) must be no + * more than 255. + * @returns The size in bytes on success, or a negative error code + * (see @ref opus_errorcodes) on error. + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_multistream_decoder_get_size( + int streams, + int coupled_streams +); + +/** Allocates and initializes a multistream decoder state. + * Call opus_multistream_decoder_destroy() to release + * this object when finished. + * @param Fs <tt>opus_int32</tt>: Sampling rate to decode at (in Hz). + * This must be one of 8000, 12000, 16000, + * 24000, or 48000. + * @param channels <tt>int</tt>: Number of channels to output. + * This must be at most 255. + * It may be different from the number of coded + * channels (<code>streams + + * coupled_streams</code>). + * @param streams <tt>int</tt>: The total number of streams coded in the + * input. + * This must be no more than 255. + * @param coupled_streams <tt>int</tt>: Number of streams to decode as coupled + * (2 channel) streams. + * This must be no larger than the total + * number of streams. + * Additionally, The total number of + * coded channels (<code>streams + + * coupled_streams</code>) must be no + * more than 255. + * @param[in] mapping <code>const unsigned char[channels]</code>: Mapping from + * coded channels to output channels, as described in + * @ref opus_multistream. + * @param[out] error <tt>int *</tt>: Returns #OPUS_OK on success, or an error + * code (see @ref opus_errorcodes) on + * failure. + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT OpusMSDecoder *opus_multistream_decoder_create( + opus_int32 Fs, + int channels, + int streams, + int coupled_streams, + const unsigned char *mapping, + int *error +) OPUS_ARG_NONNULL(5); + +/** Intialize a previously allocated decoder state object. + * The memory pointed to by \a st must be at least the size returned by + * opus_multistream_encoder_get_size(). + * This is intended for applications which use their own allocator instead of + * malloc. + * To reset a previously initialized state, use the #OPUS_RESET_STATE CTL. + * @see opus_multistream_decoder_create + * @see opus_multistream_deocder_get_size + * @param st <tt>OpusMSEncoder*</tt>: Multistream encoder state to initialize. + * @param Fs <tt>opus_int32</tt>: Sampling rate to decode at (in Hz). + * This must be one of 8000, 12000, 16000, + * 24000, or 48000. + * @param channels <tt>int</tt>: Number of channels to output. + * This must be at most 255. + * It may be different from the number of coded + * channels (<code>streams + + * coupled_streams</code>). + * @param streams <tt>int</tt>: The total number of streams coded in the + * input. + * This must be no more than 255. + * @param coupled_streams <tt>int</tt>: Number of streams to decode as coupled + * (2 channel) streams. + * This must be no larger than the total + * number of streams. + * Additionally, The total number of + * coded channels (<code>streams + + * coupled_streams</code>) must be no + * more than 255. + * @param[in] mapping <code>const unsigned char[channels]</code>: Mapping from + * coded channels to output channels, as described in + * @ref opus_multistream. + * @returns #OPUS_OK on success, or an error code (see @ref opus_errorcodes) + * on failure. + */ +OPUS_EXPORT int opus_multistream_decoder_init( + OpusMSDecoder *st, + opus_int32 Fs, + int channels, + int streams, + int coupled_streams, + const unsigned char *mapping +) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(6); + +/** Decode a multistream Opus packet. + * @param st <tt>OpusMSDecoder*</tt>: Multistream decoder state. + * @param[in] data <tt>const unsigned char*</tt>: Input payload. + * Use a <code>NULL</code> + * pointer to indicate packet + * loss. + * @param len <tt>opus_int32</tt>: Number of bytes in payload. + * @param[out] pcm <tt>opus_int16*</tt>: Output signal, with interleaved + * samples. + * This must contain room for + * <code>frame_size*channels</code> + * samples. + * @param frame_size <tt>int</tt>: The number of samples per channel of + * available space in \a pcm. + * If this is less than the maximum packet duration + * (120 ms; 5760 for 48kHz), this function will not be capable + * of decoding some packets. In the case of PLC (data==NULL) + * or FEC (decode_fec=1), then frame_size needs to be exactly + * the duration of audio that is missing, otherwise the + * decoder will not be in the optimal state to decode the + * next incoming packet. For the PLC and FEC cases, frame_size + * <b>must</b> be a multiple of 2.5 ms. + * @param decode_fec <tt>int</tt>: Flag (0 or 1) to request that any in-band + * forward error correction data be decoded. + * If no such data is available, the frame is + * decoded as if it were lost. + * @returns Number of samples decoded on success or a negative error code + * (see @ref opus_errorcodes) on failure. + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_multistream_decode( + OpusMSDecoder *st, + const unsigned char *data, + opus_int32 len, + opus_int16 *pcm, + int frame_size, + int decode_fec +) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4); + +/** Decode a multistream Opus packet with floating point output. + * @param st <tt>OpusMSDecoder*</tt>: Multistream decoder state. + * @param[in] data <tt>const unsigned char*</tt>: Input payload. + * Use a <code>NULL</code> + * pointer to indicate packet + * loss. + * @param len <tt>opus_int32</tt>: Number of bytes in payload. + * @param[out] pcm <tt>opus_int16*</tt>: Output signal, with interleaved + * samples. + * This must contain room for + * <code>frame_size*channels</code> + * samples. + * @param frame_size <tt>int</tt>: The number of samples per channel of + * available space in \a pcm. + * If this is less than the maximum packet duration + * (120 ms; 5760 for 48kHz), this function will not be capable + * of decoding some packets. In the case of PLC (data==NULL) + * or FEC (decode_fec=1), then frame_size needs to be exactly + * the duration of audio that is missing, otherwise the + * decoder will not be in the optimal state to decode the + * next incoming packet. For the PLC and FEC cases, frame_size + * <b>must</b> be a multiple of 2.5 ms. + * @param decode_fec <tt>int</tt>: Flag (0 or 1) to request that any in-band + * forward error correction data be decoded. + * If no such data is available, the frame is + * decoded as if it were lost. + * @returns Number of samples decoded on success or a negative error code + * (see @ref opus_errorcodes) on failure. + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_multistream_decode_float( + OpusMSDecoder *st, + const unsigned char *data, + opus_int32 len, + float *pcm, + int frame_size, + int decode_fec +) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4); + +/** Perform a CTL function on a multistream Opus decoder. + * + * Generally the request and subsequent arguments are generated by a + * convenience macro. + * @param st <tt>OpusMSDecoder*</tt>: Multistream decoder state. + * @param request This and all remaining parameters should be replaced by one + * of the convenience macros in @ref opus_genericctls, + * @ref opus_decoderctls, or @ref opus_multistream_ctls. + * @see opus_genericctls + * @see opus_decoderctls + * @see opus_multistream_ctls + */ +OPUS_EXPORT int opus_multistream_decoder_ctl(OpusMSDecoder *st, int request, ...) OPUS_ARG_NONNULL(1); + +/** Frees an <code>OpusMSDecoder</code> allocated by + * opus_multistream_decoder_create(). + * @param st <tt>OpusMSDecoder</tt>: Multistream decoder state to be freed. + */ +OPUS_EXPORT void opus_multistream_decoder_destroy(OpusMSDecoder *st); + +/**@}*/ + +/**@}*/ + +#ifdef __cplusplus +} +#endif + +#endif /* OPUS_MULTISTREAM_H */ |