diff options
Diffstat (limited to '')
| -rw-r--r-- | mozglue/tests/TestBaseProfiler.cpp | 5732 |
1 files changed, 5732 insertions, 0 deletions
diff --git a/mozglue/tests/TestBaseProfiler.cpp b/mozglue/tests/TestBaseProfiler.cpp new file mode 100644 index 0000000000..03b2076ebc --- /dev/null +++ b/mozglue/tests/TestBaseProfiler.cpp @@ -0,0 +1,5732 @@ +/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ +/* vim: set ts=8 sts=2 et sw=2 tw=80: */ +/* This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this file, + * You can obtain one at http://mozilla.org/MPL/2.0/. */ + +#include "BaseProfiler.h" + +#include "mozilla/Attributes.h" +#include "mozilla/BaseAndGeckoProfilerDetail.h" +#include "mozilla/BaseProfileJSONWriter.h" +#include "mozilla/BaseProfilerDetail.h" +#include "mozilla/FailureLatch.h" +#include "mozilla/FloatingPoint.h" +#include "mozilla/NotNull.h" +#include "mozilla/ProgressLogger.h" +#include "mozilla/ProportionValue.h" + +#ifdef MOZ_GECKO_PROFILER +# include "mozilla/BaseProfilerMarkerTypes.h" +# include "mozilla/BlocksRingBuffer.h" +# include "mozilla/leb128iterator.h" +# include "mozilla/ModuloBuffer.h" +# include "mozilla/mozalloc.h" +# include "mozilla/PowerOfTwo.h" +# include "mozilla/ProfileBufferChunk.h" +# include "mozilla/ProfileBufferChunkManagerSingle.h" +# include "mozilla/ProfileBufferChunkManagerWithLocalLimit.h" +# include "mozilla/ProfileBufferControlledChunkManager.h" +# include "mozilla/ProfileChunkedBuffer.h" +# include "mozilla/Vector.h" +#endif // MOZ_GECKO_PROFILER + +#if defined(_MSC_VER) || defined(__MINGW32__) +# include <windows.h> +# include <mmsystem.h> +# include <process.h> +#else +# include <errno.h> +# include <time.h> +#endif + +#include <algorithm> +#include <atomic> +#include <iostream> +#include <random> +#include <thread> +#include <type_traits> +#include <utility> + +void TestFailureLatch() { + printf("TestFailureLatch...\n"); + + // Test infallible latch. + { + mozilla::FailureLatchInfallibleSource& infallibleLatch = + mozilla::FailureLatchInfallibleSource::Singleton(); + + MOZ_RELEASE_ASSERT(!infallibleLatch.Fallible()); + MOZ_RELEASE_ASSERT(!infallibleLatch.Failed()); + MOZ_RELEASE_ASSERT(!infallibleLatch.GetFailure()); + MOZ_RELEASE_ASSERT(&infallibleLatch.SourceFailureLatch() == + &mozilla::FailureLatchInfallibleSource::Singleton()); + MOZ_RELEASE_ASSERT(&std::as_const(infallibleLatch).SourceFailureLatch() == + &mozilla::FailureLatchInfallibleSource::Singleton()); + } + + // Test failure latch basic functions. + { + mozilla::FailureLatchSource failureLatch; + + MOZ_RELEASE_ASSERT(failureLatch.Fallible()); + MOZ_RELEASE_ASSERT(!failureLatch.Failed()); + MOZ_RELEASE_ASSERT(!failureLatch.GetFailure()); + MOZ_RELEASE_ASSERT(&failureLatch.SourceFailureLatch() == &failureLatch); + MOZ_RELEASE_ASSERT(&std::as_const(failureLatch).SourceFailureLatch() == + &failureLatch); + + failureLatch.SetFailure("error"); + + MOZ_RELEASE_ASSERT(failureLatch.Fallible()); + MOZ_RELEASE_ASSERT(failureLatch.Failed()); + MOZ_RELEASE_ASSERT(failureLatch.GetFailure()); + MOZ_RELEASE_ASSERT(strcmp(failureLatch.GetFailure(), "error") == 0); + + failureLatch.SetFailure("later error"); + + MOZ_RELEASE_ASSERT(failureLatch.Fallible()); + MOZ_RELEASE_ASSERT(failureLatch.Failed()); + MOZ_RELEASE_ASSERT(failureLatch.GetFailure()); + MOZ_RELEASE_ASSERT(strcmp(failureLatch.GetFailure(), "error") == 0); + } + + // Test SetFailureFrom. + { + mozilla::FailureLatchSource failureLatch; + + MOZ_RELEASE_ASSERT(!failureLatch.Failed()); + failureLatch.SetFailureFrom(failureLatch); + MOZ_RELEASE_ASSERT(!failureLatch.Failed()); + MOZ_RELEASE_ASSERT(!failureLatch.GetFailure()); + + // SetFailureFrom with no error. + { + mozilla::FailureLatchSource failureLatchInnerOk; + MOZ_RELEASE_ASSERT(!failureLatchInnerOk.Failed()); + MOZ_RELEASE_ASSERT(!failureLatchInnerOk.GetFailure()); + + MOZ_RELEASE_ASSERT(!failureLatch.Failed()); + failureLatch.SetFailureFrom(failureLatchInnerOk); + MOZ_RELEASE_ASSERT(!failureLatch.Failed()); + + MOZ_RELEASE_ASSERT(!failureLatchInnerOk.Failed()); + MOZ_RELEASE_ASSERT(!failureLatchInnerOk.GetFailure()); + } + MOZ_RELEASE_ASSERT(!failureLatch.Failed()); + MOZ_RELEASE_ASSERT(!failureLatch.GetFailure()); + + // SetFailureFrom with error. + { + mozilla::FailureLatchSource failureLatchInnerError; + MOZ_RELEASE_ASSERT(!failureLatchInnerError.Failed()); + MOZ_RELEASE_ASSERT(!failureLatchInnerError.GetFailure()); + + failureLatchInnerError.SetFailure("inner error"); + MOZ_RELEASE_ASSERT(failureLatchInnerError.Failed()); + MOZ_RELEASE_ASSERT( + strcmp(failureLatchInnerError.GetFailure(), "inner error") == 0); + + MOZ_RELEASE_ASSERT(!failureLatch.Failed()); + failureLatch.SetFailureFrom(failureLatchInnerError); + MOZ_RELEASE_ASSERT(failureLatch.Failed()); + + MOZ_RELEASE_ASSERT(failureLatchInnerError.Failed()); + MOZ_RELEASE_ASSERT( + strcmp(failureLatchInnerError.GetFailure(), "inner error") == 0); + } + MOZ_RELEASE_ASSERT(failureLatch.Failed()); + MOZ_RELEASE_ASSERT(strcmp(failureLatch.GetFailure(), "inner error") == 0); + + failureLatch.SetFailureFrom(failureLatch); + MOZ_RELEASE_ASSERT(failureLatch.Failed()); + MOZ_RELEASE_ASSERT(strcmp(failureLatch.GetFailure(), "inner error") == 0); + + // SetFailureFrom with error again, ignored. + { + mozilla::FailureLatchSource failureLatchInnerError; + failureLatchInnerError.SetFailure("later inner error"); + MOZ_RELEASE_ASSERT(failureLatchInnerError.Failed()); + MOZ_RELEASE_ASSERT(strcmp(failureLatchInnerError.GetFailure(), + "later inner error") == 0); + + MOZ_RELEASE_ASSERT(failureLatch.Failed()); + failureLatch.SetFailureFrom(failureLatchInnerError); + MOZ_RELEASE_ASSERT(failureLatch.Failed()); + + MOZ_RELEASE_ASSERT(failureLatchInnerError.Failed()); + MOZ_RELEASE_ASSERT(strcmp(failureLatchInnerError.GetFailure(), + "later inner error") == 0); + } + MOZ_RELEASE_ASSERT(failureLatch.Failed()); + MOZ_RELEASE_ASSERT(strcmp(failureLatch.GetFailure(), "inner error") == 0); + } + + // Test FAILURELATCH_IMPL_PROXY + { + class Proxy final : public mozilla::FailureLatch { + public: + explicit Proxy(mozilla::FailureLatch& aFailureLatch) + : mFailureLatch(WrapNotNull(&aFailureLatch)) {} + + void Set(mozilla::FailureLatch& aFailureLatch) { + mFailureLatch = WrapNotNull(&aFailureLatch); + } + + FAILURELATCH_IMPL_PROXY(*mFailureLatch) + + private: + mozilla::NotNull<mozilla::FailureLatch*> mFailureLatch; + }; + + Proxy proxy{mozilla::FailureLatchInfallibleSource::Singleton()}; + + MOZ_RELEASE_ASSERT(!proxy.Fallible()); + MOZ_RELEASE_ASSERT(!proxy.Failed()); + MOZ_RELEASE_ASSERT(!proxy.GetFailure()); + MOZ_RELEASE_ASSERT(&proxy.SourceFailureLatch() == + &mozilla::FailureLatchInfallibleSource::Singleton()); + MOZ_RELEASE_ASSERT(&std::as_const(proxy).SourceFailureLatch() == + &mozilla::FailureLatchInfallibleSource::Singleton()); + + // Error from proxy. + { + mozilla::FailureLatchSource failureLatch; + proxy.Set(failureLatch); + MOZ_RELEASE_ASSERT(proxy.Fallible()); + MOZ_RELEASE_ASSERT(!proxy.Failed()); + MOZ_RELEASE_ASSERT(!proxy.GetFailure()); + MOZ_RELEASE_ASSERT(&proxy.SourceFailureLatch() == &failureLatch); + MOZ_RELEASE_ASSERT(&std::as_const(proxy).SourceFailureLatch() == + &failureLatch); + + proxy.SetFailure("error"); + MOZ_RELEASE_ASSERT(proxy.Failed()); + MOZ_RELEASE_ASSERT(strcmp(proxy.GetFailure(), "error") == 0); + MOZ_RELEASE_ASSERT(failureLatch.Failed()); + MOZ_RELEASE_ASSERT(strcmp(failureLatch.GetFailure(), "error") == 0); + + // Don't forget to stop pointing at soon-to-be-destroyed object. + proxy.Set(mozilla::FailureLatchInfallibleSource::Singleton()); + } + + // Error from proxy's origin. + { + mozilla::FailureLatchSource failureLatch; + proxy.Set(failureLatch); + MOZ_RELEASE_ASSERT(proxy.Fallible()); + MOZ_RELEASE_ASSERT(!proxy.Failed()); + MOZ_RELEASE_ASSERT(!proxy.GetFailure()); + MOZ_RELEASE_ASSERT(&proxy.SourceFailureLatch() == &failureLatch); + MOZ_RELEASE_ASSERT(&std::as_const(proxy).SourceFailureLatch() == + &failureLatch); + + failureLatch.SetFailure("error"); + MOZ_RELEASE_ASSERT(proxy.Failed()); + MOZ_RELEASE_ASSERT(strcmp(proxy.GetFailure(), "error") == 0); + MOZ_RELEASE_ASSERT(failureLatch.Failed()); + MOZ_RELEASE_ASSERT(strcmp(failureLatch.GetFailure(), "error") == 0); + + // Don't forget to stop pointing at soon-to-be-destroyed object. + proxy.Set(mozilla::FailureLatchInfallibleSource::Singleton()); + } + + MOZ_RELEASE_ASSERT(!proxy.Fallible()); + MOZ_RELEASE_ASSERT(!proxy.Failed()); + MOZ_RELEASE_ASSERT(!proxy.GetFailure()); + MOZ_RELEASE_ASSERT(&proxy.SourceFailureLatch() == + &mozilla::FailureLatchInfallibleSource::Singleton()); + MOZ_RELEASE_ASSERT(&std::as_const(proxy).SourceFailureLatch() == + &mozilla::FailureLatchInfallibleSource::Singleton()); + } + + // Test FAILURELATCH_IMPL_PROXY_OR_INFALLIBLE + { + class ProxyOrNull final : public mozilla::FailureLatch { + public: + ProxyOrNull() = default; + + void Set(mozilla::FailureLatch* aFailureLatchOrNull) { + mFailureLatchOrNull = aFailureLatchOrNull; + } + + FAILURELATCH_IMPL_PROXY_OR_INFALLIBLE(mFailureLatchOrNull, ProxyOrNull) + + private: + mozilla::FailureLatch* mFailureLatchOrNull = nullptr; + }; + + ProxyOrNull proxy; + + MOZ_RELEASE_ASSERT(!proxy.Fallible()); + MOZ_RELEASE_ASSERT(!proxy.Failed()); + MOZ_RELEASE_ASSERT(!proxy.GetFailure()); + MOZ_RELEASE_ASSERT(&proxy.SourceFailureLatch() == + &mozilla::FailureLatchInfallibleSource::Singleton()); + MOZ_RELEASE_ASSERT(&std::as_const(proxy).SourceFailureLatch() == + &mozilla::FailureLatchInfallibleSource::Singleton()); + + // Error from proxy. + { + mozilla::FailureLatchSource failureLatch; + proxy.Set(&failureLatch); + MOZ_RELEASE_ASSERT(proxy.Fallible()); + MOZ_RELEASE_ASSERT(!proxy.Failed()); + MOZ_RELEASE_ASSERT(!proxy.GetFailure()); + MOZ_RELEASE_ASSERT(&proxy.SourceFailureLatch() == &failureLatch); + MOZ_RELEASE_ASSERT(&std::as_const(proxy).SourceFailureLatch() == + &failureLatch); + + proxy.SetFailure("error"); + MOZ_RELEASE_ASSERT(proxy.Failed()); + MOZ_RELEASE_ASSERT(strcmp(proxy.GetFailure(), "error") == 0); + MOZ_RELEASE_ASSERT(failureLatch.Failed()); + MOZ_RELEASE_ASSERT(strcmp(failureLatch.GetFailure(), "error") == 0); + + // Don't forget to stop pointing at soon-to-be-destroyed object. + proxy.Set(nullptr); + } + + // Error from proxy's origin. + { + mozilla::FailureLatchSource failureLatch; + proxy.Set(&failureLatch); + MOZ_RELEASE_ASSERT(proxy.Fallible()); + MOZ_RELEASE_ASSERT(!proxy.Failed()); + MOZ_RELEASE_ASSERT(!proxy.GetFailure()); + MOZ_RELEASE_ASSERT(&proxy.SourceFailureLatch() == &failureLatch); + MOZ_RELEASE_ASSERT(&std::as_const(proxy).SourceFailureLatch() == + &failureLatch); + + failureLatch.SetFailure("error"); + MOZ_RELEASE_ASSERT(proxy.Failed()); + MOZ_RELEASE_ASSERT(strcmp(proxy.GetFailure(), "error") == 0); + MOZ_RELEASE_ASSERT(failureLatch.Failed()); + MOZ_RELEASE_ASSERT(strcmp(failureLatch.GetFailure(), "error") == 0); + + // Don't forget to stop pointing at soon-to-be-destroyed object. + proxy.Set(nullptr); + } + + MOZ_RELEASE_ASSERT(!proxy.Fallible()); + MOZ_RELEASE_ASSERT(!proxy.Failed()); + MOZ_RELEASE_ASSERT(!proxy.GetFailure()); + MOZ_RELEASE_ASSERT(&proxy.SourceFailureLatch() == + &mozilla::FailureLatchInfallibleSource::Singleton()); + MOZ_RELEASE_ASSERT(&std::as_const(proxy).SourceFailureLatch() == + &mozilla::FailureLatchInfallibleSource::Singleton()); + } + + printf("TestFailureLatch done\n"); +} + +void TestProfilerUtils() { + printf("TestProfilerUtils...\n"); + + { + using mozilla::baseprofiler::BaseProfilerProcessId; + using Number = BaseProfilerProcessId::NumberType; + static constexpr Number scMaxNumber = std::numeric_limits<Number>::max(); + + static_assert( + BaseProfilerProcessId{}.ToNumber() == 0, + "These tests assume that the unspecified process id number is 0; " + "if this fails, please update these tests accordingly"); + + static_assert(!BaseProfilerProcessId{}.IsSpecified()); + static_assert(!BaseProfilerProcessId::FromNumber(0).IsSpecified()); + static_assert(BaseProfilerProcessId::FromNumber(1).IsSpecified()); + static_assert(BaseProfilerProcessId::FromNumber(123).IsSpecified()); + static_assert(BaseProfilerProcessId::FromNumber(scMaxNumber).IsSpecified()); + + static_assert(BaseProfilerProcessId::FromNumber(Number(1)).ToNumber() == + Number(1)); + static_assert(BaseProfilerProcessId::FromNumber(Number(123)).ToNumber() == + Number(123)); + static_assert(BaseProfilerProcessId::FromNumber(scMaxNumber).ToNumber() == + scMaxNumber); + + static_assert(BaseProfilerProcessId{} == BaseProfilerProcessId{}); + static_assert(BaseProfilerProcessId::FromNumber(Number(123)) == + BaseProfilerProcessId::FromNumber(Number(123))); + static_assert(BaseProfilerProcessId{} != + BaseProfilerProcessId::FromNumber(Number(123))); + static_assert(BaseProfilerProcessId::FromNumber(Number(123)) != + BaseProfilerProcessId{}); + static_assert(BaseProfilerProcessId::FromNumber(Number(123)) != + BaseProfilerProcessId::FromNumber(scMaxNumber)); + static_assert(BaseProfilerProcessId::FromNumber(scMaxNumber) != + BaseProfilerProcessId::FromNumber(Number(123))); + + // Verify trivial-copyability by memcpy'ing to&from same-size storage. + static_assert(std::is_trivially_copyable_v<BaseProfilerProcessId>); + BaseProfilerProcessId pid; + MOZ_RELEASE_ASSERT(!pid.IsSpecified()); + Number pidStorage; + static_assert(sizeof(pidStorage) == sizeof(pid)); + // Copy from BaseProfilerProcessId to storage. Note: We cannot assume that + // this is equal to what ToNumber() gives us. All we can do is verify that + // copying from storage back to BaseProfilerProcessId works as expected. + std::memcpy(&pidStorage, &pid, sizeof(pidStorage)); + BaseProfilerProcessId pid2 = BaseProfilerProcessId::FromNumber(2); + MOZ_RELEASE_ASSERT(pid2.IsSpecified()); + std::memcpy(&pid2, &pidStorage, sizeof(pid)); + MOZ_RELEASE_ASSERT(!pid2.IsSpecified()); + + pid = BaseProfilerProcessId::FromNumber(123); + std::memcpy(&pidStorage, &pid, sizeof(pidStorage)); + pid2 = BaseProfilerProcessId{}; + MOZ_RELEASE_ASSERT(!pid2.IsSpecified()); + std::memcpy(&pid2, &pidStorage, sizeof(pid)); + MOZ_RELEASE_ASSERT(pid2.IsSpecified()); + MOZ_RELEASE_ASSERT(pid2.ToNumber() == 123); + + // No conversions to/from numbers. + static_assert(!std::is_constructible_v<BaseProfilerProcessId, Number>); + static_assert(!std::is_assignable_v<BaseProfilerProcessId, Number>); + static_assert(!std::is_constructible_v<Number, BaseProfilerProcessId>); + static_assert(!std::is_assignable_v<Number, BaseProfilerProcessId>); + + static_assert( + std::is_same_v< + decltype(mozilla::baseprofiler::profiler_current_process_id()), + BaseProfilerProcessId>); + MOZ_RELEASE_ASSERT( + mozilla::baseprofiler::profiler_current_process_id().IsSpecified()); + } + + { + mozilla::baseprofiler::profiler_init_main_thread_id(); + + using mozilla::baseprofiler::BaseProfilerThreadId; + using Number = BaseProfilerThreadId::NumberType; + static constexpr Number scMaxNumber = std::numeric_limits<Number>::max(); + + static_assert( + BaseProfilerThreadId{}.ToNumber() == 0, + "These tests assume that the unspecified thread id number is 0; " + "if this fails, please update these tests accordingly"); + + static_assert(!BaseProfilerThreadId{}.IsSpecified()); + static_assert(!BaseProfilerThreadId::FromNumber(0).IsSpecified()); + static_assert(BaseProfilerThreadId::FromNumber(1).IsSpecified()); + static_assert(BaseProfilerThreadId::FromNumber(123).IsSpecified()); + static_assert(BaseProfilerThreadId::FromNumber(scMaxNumber).IsSpecified()); + + static_assert(BaseProfilerThreadId::FromNumber(Number(1)).ToNumber() == + Number(1)); + static_assert(BaseProfilerThreadId::FromNumber(Number(123)).ToNumber() == + Number(123)); + static_assert(BaseProfilerThreadId::FromNumber(scMaxNumber).ToNumber() == + scMaxNumber); + + static_assert(BaseProfilerThreadId{} == BaseProfilerThreadId{}); + static_assert(BaseProfilerThreadId::FromNumber(Number(123)) == + BaseProfilerThreadId::FromNumber(Number(123))); + static_assert(BaseProfilerThreadId{} != + BaseProfilerThreadId::FromNumber(Number(123))); + static_assert(BaseProfilerThreadId::FromNumber(Number(123)) != + BaseProfilerThreadId{}); + static_assert(BaseProfilerThreadId::FromNumber(Number(123)) != + BaseProfilerThreadId::FromNumber(scMaxNumber)); + static_assert(BaseProfilerThreadId::FromNumber(scMaxNumber) != + BaseProfilerThreadId::FromNumber(Number(123))); + + // Verify trivial-copyability by memcpy'ing to&from same-size storage. + static_assert(std::is_trivially_copyable_v<BaseProfilerThreadId>); + BaseProfilerThreadId tid; + MOZ_RELEASE_ASSERT(!tid.IsSpecified()); + Number tidStorage; + static_assert(sizeof(tidStorage) == sizeof(tid)); + // Copy from BaseProfilerThreadId to storage. Note: We cannot assume that + // this is equal to what ToNumber() gives us. All we can do is verify that + // copying from storage back to BaseProfilerThreadId works as expected. + std::memcpy(&tidStorage, &tid, sizeof(tidStorage)); + BaseProfilerThreadId tid2 = BaseProfilerThreadId::FromNumber(2); + MOZ_RELEASE_ASSERT(tid2.IsSpecified()); + std::memcpy(&tid2, &tidStorage, sizeof(tid)); + MOZ_RELEASE_ASSERT(!tid2.IsSpecified()); + + tid = BaseProfilerThreadId::FromNumber(Number(123)); + std::memcpy(&tidStorage, &tid, sizeof(tidStorage)); + tid2 = BaseProfilerThreadId{}; + MOZ_RELEASE_ASSERT(!tid2.IsSpecified()); + std::memcpy(&tid2, &tidStorage, sizeof(tid)); + MOZ_RELEASE_ASSERT(tid2.IsSpecified()); + MOZ_RELEASE_ASSERT(tid2.ToNumber() == Number(123)); + + // No conversions to/from numbers. + static_assert(!std::is_constructible_v<BaseProfilerThreadId, Number>); + static_assert(!std::is_assignable_v<BaseProfilerThreadId, Number>); + static_assert(!std::is_constructible_v<Number, BaseProfilerThreadId>); + static_assert(!std::is_assignable_v<Number, BaseProfilerThreadId>); + + static_assert(std::is_same_v< + decltype(mozilla::baseprofiler::profiler_current_thread_id()), + BaseProfilerThreadId>); + BaseProfilerThreadId mainTestThreadId = + mozilla::baseprofiler::profiler_current_thread_id(); + MOZ_RELEASE_ASSERT(mainTestThreadId.IsSpecified()); + + BaseProfilerThreadId mainThreadId = + mozilla::baseprofiler::profiler_main_thread_id(); + MOZ_RELEASE_ASSERT(mainThreadId.IsSpecified()); + + MOZ_RELEASE_ASSERT(mainThreadId == mainTestThreadId, + "Test should run on the main thread"); + MOZ_RELEASE_ASSERT(mozilla::baseprofiler::profiler_is_main_thread()); + + std::thread testThread([&]() { + const BaseProfilerThreadId testThreadId = + mozilla::baseprofiler::profiler_current_thread_id(); + MOZ_RELEASE_ASSERT(testThreadId.IsSpecified()); + MOZ_RELEASE_ASSERT(testThreadId != mainThreadId); + MOZ_RELEASE_ASSERT(!mozilla::baseprofiler::profiler_is_main_thread()); + }); + testThread.join(); + } + + // No conversions between processes and threads. + static_assert( + !std::is_constructible_v<mozilla::baseprofiler::BaseProfilerThreadId, + mozilla::baseprofiler::BaseProfilerProcessId>); + static_assert( + !std::is_assignable_v<mozilla::baseprofiler::BaseProfilerThreadId, + mozilla::baseprofiler::BaseProfilerProcessId>); + static_assert( + !std::is_constructible_v<mozilla::baseprofiler::BaseProfilerProcessId, + mozilla::baseprofiler::BaseProfilerThreadId>); + static_assert( + !std::is_assignable_v<mozilla::baseprofiler::BaseProfilerProcessId, + mozilla::baseprofiler::BaseProfilerThreadId>); + + printf("TestProfilerUtils done\n"); +} + +void TestBaseAndProfilerDetail() { + printf("TestBaseAndProfilerDetail...\n"); + + { + using mozilla::profiler::detail::FilterHasPid; + + const auto pid123 = + mozilla::baseprofiler::BaseProfilerProcessId::FromNumber(123); + MOZ_RELEASE_ASSERT(FilterHasPid("pid:123", pid123)); + MOZ_RELEASE_ASSERT(!FilterHasPid("", pid123)); + MOZ_RELEASE_ASSERT(!FilterHasPid(" ", pid123)); + MOZ_RELEASE_ASSERT(!FilterHasPid("123", pid123)); + MOZ_RELEASE_ASSERT(!FilterHasPid("pid", pid123)); + MOZ_RELEASE_ASSERT(!FilterHasPid("pid:", pid123)); + MOZ_RELEASE_ASSERT(!FilterHasPid("pid=123", pid123)); + MOZ_RELEASE_ASSERT(!FilterHasPid("pid:123 ", pid123)); + MOZ_RELEASE_ASSERT(!FilterHasPid("pid: 123", pid123)); + MOZ_RELEASE_ASSERT(!FilterHasPid("pid:0123", pid123)); + MOZ_RELEASE_ASSERT(!FilterHasPid("pid:0000000000000000000000123", pid123)); + MOZ_RELEASE_ASSERT(!FilterHasPid("pid:12", pid123)); + MOZ_RELEASE_ASSERT(!FilterHasPid("pid:1234", pid123)); + MOZ_RELEASE_ASSERT(!FilterHasPid("pid:0", pid123)); + + using PidNumber = mozilla::baseprofiler::BaseProfilerProcessId::NumberType; + const PidNumber maxNumber = std::numeric_limits<PidNumber>::max(); + const auto maxPid = + mozilla::baseprofiler::BaseProfilerProcessId::FromNumber(maxNumber); + const std::string maxPidString = "pid:" + std::to_string(maxNumber); + MOZ_RELEASE_ASSERT(FilterHasPid(maxPidString.c_str(), maxPid)); + + const std::string tooBigPidString = maxPidString + "0"; + MOZ_RELEASE_ASSERT(!FilterHasPid(tooBigPidString.c_str(), maxPid)); + } + + { + using mozilla::profiler::detail::FiltersExcludePid; + const auto pid123 = + mozilla::baseprofiler::BaseProfilerProcessId::FromNumber(123); + + MOZ_RELEASE_ASSERT( + !FiltersExcludePid(mozilla::Span<const char*>{}, pid123)); + + { + const char* const filters[] = {"main"}; + MOZ_RELEASE_ASSERT(!FiltersExcludePid(filters, pid123)); + } + + { + const char* const filters[] = {"main", "pid:123"}; + MOZ_RELEASE_ASSERT(!FiltersExcludePid(filters, pid123)); + } + + { + const char* const filters[] = {"main", "pid:456"}; + MOZ_RELEASE_ASSERT(!FiltersExcludePid(filters, pid123)); + } + + { + const char* const filters[] = {"pid:123"}; + MOZ_RELEASE_ASSERT(!FiltersExcludePid(filters, pid123)); + } + + { + const char* const filters[] = {"pid:123", "pid:456"}; + MOZ_RELEASE_ASSERT(!FiltersExcludePid(filters, pid123)); + } + + { + const char* const filters[] = {"pid:456", "pid:123"}; + MOZ_RELEASE_ASSERT(!FiltersExcludePid(filters, pid123)); + } + + { + const char* const filters[] = {"pid:456"}; + MOZ_RELEASE_ASSERT(FiltersExcludePid(filters, pid123)); + } + + { + const char* const filters[] = {"pid:456", "pid:789"}; + MOZ_RELEASE_ASSERT(FiltersExcludePid(filters, pid123)); + } + } + + printf("TestBaseAndProfilerDetail done\n"); +} + +void TestSharedMutex() { + printf("TestSharedMutex...\n"); + + mozilla::baseprofiler::detail::BaseProfilerSharedMutex sm; + + // First round of minimal tests in this thread. + + MOZ_RELEASE_ASSERT(!sm.IsLockedExclusiveOnCurrentThread()); + + sm.LockExclusive(); + MOZ_RELEASE_ASSERT(sm.IsLockedExclusiveOnCurrentThread()); + sm.UnlockExclusive(); + MOZ_RELEASE_ASSERT(!sm.IsLockedExclusiveOnCurrentThread()); + + sm.LockShared(); + MOZ_RELEASE_ASSERT(!sm.IsLockedExclusiveOnCurrentThread()); + sm.UnlockShared(); + MOZ_RELEASE_ASSERT(!sm.IsLockedExclusiveOnCurrentThread()); + + { + mozilla::baseprofiler::detail::BaseProfilerAutoLockExclusive exclusiveLock{ + sm}; + MOZ_RELEASE_ASSERT(sm.IsLockedExclusiveOnCurrentThread()); + } + MOZ_RELEASE_ASSERT(!sm.IsLockedExclusiveOnCurrentThread()); + + { + mozilla::baseprofiler::detail::BaseProfilerAutoLockShared sharedLock{sm}; + MOZ_RELEASE_ASSERT(!sm.IsLockedExclusiveOnCurrentThread()); + } + MOZ_RELEASE_ASSERT(!sm.IsLockedExclusiveOnCurrentThread()); + + // The following will run actions between two threads, to verify that + // exclusive and shared locks work as expected. + + // These actions will happen from top to bottom. + // This will test all possible lock interactions. + enum NextAction { // State of the lock: + t1Starting, // (x=exclusive, s=shared, ?=blocked) + t2Starting, // t1 t2 + t1LockExclusive, // x + t2LockExclusiveAndBlock, // x x? - Can't have two exclusives. + t1UnlockExclusive, // x + t2UnblockedAfterT1Unlock, // x + t1LockSharedAndBlock, // s? x - Can't have shared during excl + t2UnlockExclusive, // s + t1UnblockedAfterT2Unlock, // s + t2LockShared, // s s - Can have multiple shared locks + t1UnlockShared, // s + t2StillLockedShared, // s + t1LockExclusiveAndBlock, // x? s - Can't have excl during shared + t2UnlockShared, // x + t1UnblockedAfterT2UnlockShared, // x + t2CheckAfterT1Lock, // x + t1LastUnlockExclusive, // (unlocked) + done + }; + + // Each thread will repeatedly read this `nextAction`, and run actions that + // target it... + std::atomic<NextAction> nextAction{static_cast<NextAction>(0)}; + // ... and advance to the next available action (which should usually be for + // the other thread). + auto AdvanceAction = [&nextAction]() { + MOZ_RELEASE_ASSERT(nextAction <= done); + nextAction = static_cast<NextAction>(static_cast<int>(nextAction) + 1); + }; + + std::thread t1{[&]() { + for (;;) { + switch (nextAction) { + case t1Starting: + AdvanceAction(); + break; + case t1LockExclusive: + MOZ_RELEASE_ASSERT(!sm.IsLockedExclusiveOnCurrentThread()); + sm.LockExclusive(); + MOZ_RELEASE_ASSERT(sm.IsLockedExclusiveOnCurrentThread()); + AdvanceAction(); + break; + case t1UnlockExclusive: + MOZ_RELEASE_ASSERT(sm.IsLockedExclusiveOnCurrentThread()); + // Advance first, before unlocking, so that t2 sees the new state. + AdvanceAction(); + sm.UnlockExclusive(); + MOZ_RELEASE_ASSERT(!sm.IsLockedExclusiveOnCurrentThread()); + break; + case t1LockSharedAndBlock: + // Advance action before attempting to lock after t2's exclusive lock. + AdvanceAction(); + sm.LockShared(); + // We will only acquire the lock after t1 unlocks. + MOZ_RELEASE_ASSERT(nextAction == t1UnblockedAfterT2Unlock); + MOZ_RELEASE_ASSERT(!sm.IsLockedExclusiveOnCurrentThread()); + AdvanceAction(); + break; + case t1UnlockShared: + MOZ_RELEASE_ASSERT(!sm.IsLockedExclusiveOnCurrentThread()); + // Advance first, before unlocking, so that t2 sees the new state. + AdvanceAction(); + sm.UnlockShared(); + MOZ_RELEASE_ASSERT(!sm.IsLockedExclusiveOnCurrentThread()); + break; + case t1LockExclusiveAndBlock: + MOZ_RELEASE_ASSERT(!sm.IsLockedExclusiveOnCurrentThread()); + // Advance action before attempting to lock after t2's shared lock. + AdvanceAction(); + sm.LockExclusive(); + // We will only acquire the lock after t2 unlocks. + MOZ_RELEASE_ASSERT(nextAction == t1UnblockedAfterT2UnlockShared); + MOZ_RELEASE_ASSERT(sm.IsLockedExclusiveOnCurrentThread()); + AdvanceAction(); + break; + case t1LastUnlockExclusive: + MOZ_RELEASE_ASSERT(sm.IsLockedExclusiveOnCurrentThread()); + // Advance first, before unlocking, so that t2 sees the new state. + AdvanceAction(); + sm.UnlockExclusive(); + MOZ_RELEASE_ASSERT(!sm.IsLockedExclusiveOnCurrentThread()); + break; + case done: + return; + default: + // Ignore other actions intended for t2. + break; + } + } + }}; + + std::thread t2{[&]() { + for (;;) { + switch (nextAction) { + case t2Starting: + AdvanceAction(); + break; + case t2LockExclusiveAndBlock: + MOZ_RELEASE_ASSERT(!sm.IsLockedExclusiveOnCurrentThread()); + // Advance action before attempting to lock after t1's exclusive lock. + AdvanceAction(); + sm.LockExclusive(); + // We will only acquire the lock after t1 unlocks. + MOZ_RELEASE_ASSERT(nextAction == t2UnblockedAfterT1Unlock); + MOZ_RELEASE_ASSERT(sm.IsLockedExclusiveOnCurrentThread()); + AdvanceAction(); + break; + case t2UnlockExclusive: + MOZ_RELEASE_ASSERT(sm.IsLockedExclusiveOnCurrentThread()); + // Advance first, before unlocking, so that t1 sees the new state. + AdvanceAction(); + sm.UnlockExclusive(); + MOZ_RELEASE_ASSERT(!sm.IsLockedExclusiveOnCurrentThread()); + break; + case t2LockShared: + sm.LockShared(); + MOZ_RELEASE_ASSERT(!sm.IsLockedExclusiveOnCurrentThread()); + AdvanceAction(); + break; + case t2StillLockedShared: + AdvanceAction(); + break; + case t2UnlockShared: + MOZ_RELEASE_ASSERT(!sm.IsLockedExclusiveOnCurrentThread()); + // Advance first, before unlocking, so that t1 sees the new state. + AdvanceAction(); + sm.UnlockShared(); + MOZ_RELEASE_ASSERT(!sm.IsLockedExclusiveOnCurrentThread()); + break; + case t2CheckAfterT1Lock: + MOZ_RELEASE_ASSERT(!sm.IsLockedExclusiveOnCurrentThread()); + AdvanceAction(); + break; + case done: + return; + default: + // Ignore other actions intended for t1. + break; + } + } + }}; + + t1.join(); + t2.join(); + + printf("TestSharedMutex done\n"); +} + +void TestProportionValue() { + printf("TestProportionValue...\n"); + + using mozilla::ProportionValue; + +#define STATIC_ASSERT_EQ(a, b) \ + static_assert((a) == (b)); \ + MOZ_RELEASE_ASSERT((a) == (b)); + +#define STATIC_ASSERT(e) STATIC_ASSERT_EQ(e, true) + + // Conversion from&to double. + STATIC_ASSERT_EQ(ProportionValue().ToDouble(), 0.0); + STATIC_ASSERT_EQ(ProportionValue(0.0).ToDouble(), 0.0); + STATIC_ASSERT_EQ(ProportionValue(0.5).ToDouble(), 0.5); + STATIC_ASSERT_EQ(ProportionValue(1.0).ToDouble(), 1.0); + + // Clamping. + STATIC_ASSERT_EQ( + ProportionValue(std::numeric_limits<double>::min()).ToDouble(), 0.0); + STATIC_ASSERT_EQ( + ProportionValue(std::numeric_limits<long double>::min()).ToDouble(), 0.0); + STATIC_ASSERT_EQ(ProportionValue(-1.0).ToDouble(), 0.0); + STATIC_ASSERT_EQ(ProportionValue(-0.01).ToDouble(), 0.0); + STATIC_ASSERT_EQ(ProportionValue(-0.0).ToDouble(), 0.0); + STATIC_ASSERT_EQ(ProportionValue(1.01).ToDouble(), 1.0); + STATIC_ASSERT_EQ( + ProportionValue(std::numeric_limits<double>::max()).ToDouble(), 1.0); + + // User-defined literal. + { + using namespace mozilla::literals::ProportionValue_literals; + STATIC_ASSERT_EQ(0_pc, ProportionValue(0.0)); + STATIC_ASSERT_EQ(0._pc, ProportionValue(0.0)); + STATIC_ASSERT_EQ(50_pc, ProportionValue(0.5)); + STATIC_ASSERT_EQ(50._pc, ProportionValue(0.5)); + STATIC_ASSERT_EQ(100_pc, ProportionValue(1.0)); + STATIC_ASSERT_EQ(100._pc, ProportionValue(1.0)); + STATIC_ASSERT_EQ(101_pc, ProportionValue(1.0)); + STATIC_ASSERT_EQ(100.01_pc, ProportionValue(1.0)); + STATIC_ASSERT_EQ(1000_pc, ProportionValue(1.0)); + STATIC_ASSERT_EQ(1000._pc, ProportionValue(1.0)); + } + { + // ProportionValue_literals is an inline namespace of mozilla::literals, so + // it's optional. + using namespace mozilla::literals; + STATIC_ASSERT_EQ(0_pc, ProportionValue(0.0)); + STATIC_ASSERT_EQ(0._pc, ProportionValue(0.0)); + STATIC_ASSERT_EQ(50_pc, ProportionValue(0.5)); + STATIC_ASSERT_EQ(50._pc, ProportionValue(0.5)); + STATIC_ASSERT_EQ(100_pc, ProportionValue(1.0)); + STATIC_ASSERT_EQ(100._pc, ProportionValue(1.0)); + STATIC_ASSERT_EQ(101_pc, ProportionValue(1.0)); + STATIC_ASSERT_EQ(100.01_pc, ProportionValue(1.0)); + STATIC_ASSERT_EQ(1000_pc, ProportionValue(1.0)); + STATIC_ASSERT_EQ(1000._pc, ProportionValue(1.0)); + } + + // Invalid construction, conversion to double NaN. + MOZ_RELEASE_ASSERT(std::isnan(ProportionValue::MakeInvalid().ToDouble())); + + using namespace mozilla::literals::ProportionValue_literals; + + // Conversion to&from underlying integral number. + STATIC_ASSERT_EQ( + ProportionValue::FromUnderlyingType((0_pc).ToUnderlyingType()).ToDouble(), + 0.0); + STATIC_ASSERT_EQ( + ProportionValue::FromUnderlyingType((50_pc).ToUnderlyingType()) + .ToDouble(), + 0.5); + STATIC_ASSERT_EQ( + ProportionValue::FromUnderlyingType((100_pc).ToUnderlyingType()) + .ToDouble(), + 1.0); + STATIC_ASSERT(ProportionValue::FromUnderlyingType( + ProportionValue::MakeInvalid().ToUnderlyingType()) + .IsInvalid()); + + // IsExactlyZero. + STATIC_ASSERT(ProportionValue().IsExactlyZero()); + STATIC_ASSERT((0_pc).IsExactlyZero()); + STATIC_ASSERT(!(50_pc).IsExactlyZero()); + STATIC_ASSERT(!(100_pc).IsExactlyZero()); + STATIC_ASSERT(!ProportionValue::MakeInvalid().IsExactlyZero()); + + // IsExactlyOne. + STATIC_ASSERT(!ProportionValue().IsExactlyOne()); + STATIC_ASSERT(!(0_pc).IsExactlyOne()); + STATIC_ASSERT(!(50_pc).IsExactlyOne()); + STATIC_ASSERT((100_pc).IsExactlyOne()); + STATIC_ASSERT(!ProportionValue::MakeInvalid().IsExactlyOne()); + + // IsValid. + STATIC_ASSERT(ProportionValue().IsValid()); + STATIC_ASSERT((0_pc).IsValid()); + STATIC_ASSERT((50_pc).IsValid()); + STATIC_ASSERT((100_pc).IsValid()); + STATIC_ASSERT(!ProportionValue::MakeInvalid().IsValid()); + + // IsInvalid. + STATIC_ASSERT(!ProportionValue().IsInvalid()); + STATIC_ASSERT(!(0_pc).IsInvalid()); + STATIC_ASSERT(!(50_pc).IsInvalid()); + STATIC_ASSERT(!(100_pc).IsInvalid()); + STATIC_ASSERT(ProportionValue::MakeInvalid().IsInvalid()); + + // Addition. + STATIC_ASSERT_EQ((0_pc + 0_pc).ToDouble(), 0.0); + STATIC_ASSERT_EQ((0_pc + 100_pc).ToDouble(), 1.0); + STATIC_ASSERT_EQ((100_pc + 0_pc).ToDouble(), 1.0); + STATIC_ASSERT_EQ((100_pc + 100_pc).ToDouble(), 1.0); + STATIC_ASSERT((ProportionValue::MakeInvalid() + 50_pc).IsInvalid()); + STATIC_ASSERT((50_pc + ProportionValue::MakeInvalid()).IsInvalid()); + + // Subtraction. + STATIC_ASSERT_EQ((0_pc - 0_pc).ToDouble(), 0.0); + STATIC_ASSERT_EQ((0_pc - 100_pc).ToDouble(), 0.0); + STATIC_ASSERT_EQ((100_pc - 0_pc).ToDouble(), 1.0); + STATIC_ASSERT_EQ((100_pc - 100_pc).ToDouble(), 0.0); + STATIC_ASSERT((ProportionValue::MakeInvalid() - 50_pc).IsInvalid()); + STATIC_ASSERT((50_pc - ProportionValue::MakeInvalid()).IsInvalid()); + + // Multiplication. + STATIC_ASSERT_EQ((0_pc * 0_pc).ToDouble(), 0.0); + STATIC_ASSERT_EQ((0_pc * 100_pc).ToDouble(), 0.0); + STATIC_ASSERT_EQ((50_pc * 50_pc).ToDouble(), 0.25); + STATIC_ASSERT_EQ((50_pc * 100_pc).ToDouble(), 0.5); + STATIC_ASSERT_EQ((100_pc * 50_pc).ToDouble(), 0.5); + STATIC_ASSERT_EQ((100_pc * 0_pc).ToDouble(), 0.0); + STATIC_ASSERT_EQ((100_pc * 100_pc).ToDouble(), 1.0); + STATIC_ASSERT((ProportionValue::MakeInvalid() * 50_pc).IsInvalid()); + STATIC_ASSERT((50_pc * ProportionValue::MakeInvalid()).IsInvalid()); + + // Division by a positive integer value. + STATIC_ASSERT_EQ((100_pc / 1u).ToDouble(), 1.0); + STATIC_ASSERT_EQ((100_pc / 2u).ToDouble(), 0.5); + STATIC_ASSERT_EQ( + (ProportionValue::FromUnderlyingType(6u) / 2u).ToUnderlyingType(), 3u); + STATIC_ASSERT_EQ( + (ProportionValue::FromUnderlyingType(5u) / 2u).ToUnderlyingType(), 2u); + STATIC_ASSERT_EQ( + (ProportionValue::FromUnderlyingType(1u) / 2u).ToUnderlyingType(), 0u); + STATIC_ASSERT_EQ( + (ProportionValue::FromUnderlyingType(0u) / 2u).ToUnderlyingType(), 0u); + STATIC_ASSERT((100_pc / 0u).IsInvalid()); + STATIC_ASSERT((ProportionValue::MakeInvalid() / 2u).IsInvalid()); + + // Multiplication by a positive integer value. + STATIC_ASSERT_EQ((100_pc * 1u).ToDouble(), 1.0); + STATIC_ASSERT_EQ((50_pc * 1u).ToDouble(), 0.5); + STATIC_ASSERT_EQ((50_pc * 2u).ToDouble(), 1.0); + STATIC_ASSERT_EQ((50_pc * 3u).ToDouble(), 1.0); // Clamped. + STATIC_ASSERT_EQ( + (ProportionValue::FromUnderlyingType(1u) * 2u).ToUnderlyingType(), 2u); + STATIC_ASSERT((ProportionValue::MakeInvalid() * 2u).IsInvalid()); + + // Verifying PV - u < (PV / u) * u <= PV, with n=3, PV between 6 and 9 : + STATIC_ASSERT_EQ( + (ProportionValue::FromUnderlyingType(6u) / 3u).ToUnderlyingType(), 2u); + STATIC_ASSERT_EQ( + (ProportionValue::FromUnderlyingType(7u) / 3u).ToUnderlyingType(), 2u); + STATIC_ASSERT_EQ( + (ProportionValue::FromUnderlyingType(8u) / 3u).ToUnderlyingType(), 2u); + STATIC_ASSERT_EQ( + (ProportionValue::FromUnderlyingType(9u) / 3u).ToUnderlyingType(), 3u); + + // Direct comparisons. + STATIC_ASSERT_EQ(0_pc, 0_pc); + STATIC_ASSERT(0_pc == 0_pc); + STATIC_ASSERT(!(0_pc == 100_pc)); + STATIC_ASSERT(0_pc != 100_pc); + STATIC_ASSERT(!(0_pc != 0_pc)); + STATIC_ASSERT(0_pc < 100_pc); + STATIC_ASSERT(!(0_pc < 0_pc)); + STATIC_ASSERT(0_pc <= 0_pc); + STATIC_ASSERT(0_pc <= 100_pc); + STATIC_ASSERT(!(100_pc <= 0_pc)); + STATIC_ASSERT(100_pc > 0_pc); + STATIC_ASSERT(!(100_pc > 100_pc)); + STATIC_ASSERT(100_pc >= 0_pc); + STATIC_ASSERT(100_pc >= 100_pc); + STATIC_ASSERT(!(0_pc >= 100_pc)); + // 0.5 is binary-friendly, so we can double it and compare it exactly. + STATIC_ASSERT_EQ(50_pc + 50_pc, 100_pc); + +#undef STATIC_ASSERT_EQ + + printf("TestProportionValue done\n"); +} + +template <typename Arg0, typename... Args> +bool AreAllEqual(Arg0&& aArg0, Args&&... aArgs) { + return ((aArg0 == aArgs) && ...); +} + +void TestProgressLogger() { + printf("TestProgressLogger...\n"); + + using mozilla::ProgressLogger; + using mozilla::ProportionValue; + using namespace mozilla::literals::ProportionValue_literals; + + auto progressRefPtr = mozilla::MakeRefPtr<ProgressLogger::SharedProgress>(); + MOZ_RELEASE_ASSERT(progressRefPtr); + MOZ_RELEASE_ASSERT(progressRefPtr->Progress().IsExactlyZero()); + + { + ProgressLogger pl(progressRefPtr, "Started", "All done"); + MOZ_RELEASE_ASSERT(progressRefPtr->Progress().IsExactlyZero()); + MOZ_RELEASE_ASSERT(pl.GetGlobalProgress().IsExactlyZero()); + MOZ_RELEASE_ASSERT(AreAllEqual(progressRefPtr->LastLocation(), + pl.GetLastGlobalLocation(), "Started")); + + // At this top level, the scale is 1:1. + pl.SetLocalProgress(10_pc, "Top 10%"); + MOZ_RELEASE_ASSERT( + AreAllEqual(progressRefPtr->Progress(), pl.GetGlobalProgress(), 10_pc)); + MOZ_RELEASE_ASSERT(AreAllEqual(progressRefPtr->LastLocation(), + pl.GetLastGlobalLocation(), "Top 10%")); + + pl.SetLocalProgress(0_pc, "Restarted"); + MOZ_RELEASE_ASSERT( + AreAllEqual(progressRefPtr->Progress(), pl.GetGlobalProgress(), 0_pc)); + MOZ_RELEASE_ASSERT(AreAllEqual(progressRefPtr->LastLocation(), + pl.GetLastGlobalLocation(), "Restarted")); + + { + // Create a sub-logger for the whole global range. Notice that this is + // moving the current progress back to 0. + ProgressLogger plSub1 = + pl.CreateSubLoggerFromTo(0_pc, "Sub1 started", 100_pc, "Sub1 ended"); + MOZ_RELEASE_ASSERT(progressRefPtr->Progress().IsExactlyZero()); + MOZ_RELEASE_ASSERT(pl.GetGlobalProgress().IsExactlyZero()); + MOZ_RELEASE_ASSERT(plSub1.GetGlobalProgress().IsExactlyZero()); + MOZ_RELEASE_ASSERT(AreAllEqual( + progressRefPtr->LastLocation(), pl.GetLastGlobalLocation(), + plSub1.GetLastGlobalLocation(), "Sub1 started")); + + // At this level, the scale is still 1:1. + plSub1.SetLocalProgress(10_pc, "Sub1 10%"); + MOZ_RELEASE_ASSERT(AreAllEqual(progressRefPtr->Progress(), + pl.GetGlobalProgress(), + plSub1.GetGlobalProgress(), 10_pc)); + MOZ_RELEASE_ASSERT(AreAllEqual( + progressRefPtr->LastLocation(), pl.GetLastGlobalLocation(), + plSub1.GetLastGlobalLocation(), "Sub1 10%")); + + { + // Create a sub-logger half the global range. + // 0 0.25 0.375 0.5 0.625 0.75 1 + // |---------------|-------|-------|-------|-------|---------------| + // plSub2: 0 0.25 0.5 0.75 1 + ProgressLogger plSub2 = plSub1.CreateSubLoggerFromTo( + 25_pc, "Sub2 started", 75_pc, "Sub2 ended"); + MOZ_RELEASE_ASSERT(AreAllEqual( + progressRefPtr->Progress(), pl.GetGlobalProgress(), + plSub1.GetGlobalProgress(), plSub2.GetGlobalProgress(), 25_pc)); + MOZ_RELEASE_ASSERT(AreAllEqual( + progressRefPtr->LastLocation(), pl.GetLastGlobalLocation(), + plSub1.GetLastGlobalLocation(), plSub2.GetLastGlobalLocation(), + "Sub2 started")); + + plSub2.SetLocalProgress(25_pc, "Sub2 25%"); + MOZ_RELEASE_ASSERT(AreAllEqual( + progressRefPtr->Progress(), pl.GetGlobalProgress(), + plSub1.GetGlobalProgress(), plSub2.GetGlobalProgress(), 37.5_pc)); + MOZ_RELEASE_ASSERT(AreAllEqual( + progressRefPtr->LastLocation(), pl.GetLastGlobalLocation(), + plSub1.GetLastGlobalLocation(), plSub2.GetLastGlobalLocation(), + "Sub2 25%")); + + plSub2.SetLocalProgress(50_pc, "Sub2 50%"); + MOZ_RELEASE_ASSERT(AreAllEqual( + progressRefPtr->Progress(), pl.GetGlobalProgress(), + plSub1.GetGlobalProgress(), plSub2.GetGlobalProgress(), 50_pc)); + MOZ_RELEASE_ASSERT(AreAllEqual( + progressRefPtr->LastLocation(), pl.GetLastGlobalLocation(), + plSub1.GetLastGlobalLocation(), plSub2.GetLastGlobalLocation(), + "Sub2 50%")); + + { + // Create a sub-logger half the parent range. + // 0 0.25 0.375 0.5 0.625 0.75 1 + // |---------------|-------|-------|-------|-------|---------------| + // plSub2: 0 0.25 0.5 0.75 1 + // plSub3: 0 0.5 1 + ProgressLogger plSub3 = plSub2.CreateSubLoggerTo( + "Sub3 started", 100_pc, ProgressLogger::NO_LOCATION_UPDATE); + MOZ_RELEASE_ASSERT(AreAllEqual( + progressRefPtr->Progress(), pl.GetGlobalProgress(), + plSub1.GetGlobalProgress(), plSub2.GetGlobalProgress(), + plSub3.GetGlobalProgress(), 50_pc)); + MOZ_RELEASE_ASSERT(AreAllEqual( + progressRefPtr->LastLocation(), pl.GetLastGlobalLocation(), + plSub1.GetLastGlobalLocation(), plSub2.GetLastGlobalLocation(), + plSub3.GetLastGlobalLocation(), "Sub3 started")); + + plSub3.SetLocalProgress(50_pc, "Sub3 50%"); + MOZ_RELEASE_ASSERT(AreAllEqual( + progressRefPtr->Progress(), pl.GetGlobalProgress(), + plSub1.GetGlobalProgress(), plSub2.GetGlobalProgress(), + plSub3.GetGlobalProgress(), 62.5_pc)); + MOZ_RELEASE_ASSERT(AreAllEqual( + progressRefPtr->LastLocation(), pl.GetLastGlobalLocation(), + plSub1.GetLastGlobalLocation(), plSub2.GetLastGlobalLocation(), + plSub3.GetLastGlobalLocation(), "Sub3 50%")); + } // End of plSub3 + + // When plSub3 ends, progress moves to its 100%, which is also plSub2's + // 100%, which is plSub1's and the global progress of 75% + MOZ_RELEASE_ASSERT(AreAllEqual( + progressRefPtr->Progress(), pl.GetGlobalProgress(), + plSub1.GetGlobalProgress(), plSub2.GetGlobalProgress(), 75_pc)); + // But location is still at the last explicit update. + MOZ_RELEASE_ASSERT(AreAllEqual( + progressRefPtr->LastLocation(), pl.GetLastGlobalLocation(), + plSub1.GetLastGlobalLocation(), plSub2.GetLastGlobalLocation(), + "Sub3 50%")); + } // End of plSub2 + + MOZ_RELEASE_ASSERT(AreAllEqual(progressRefPtr->Progress(), + pl.GetGlobalProgress(), + plSub1.GetGlobalProgress(), 75_pc)); + MOZ_RELEASE_ASSERT(AreAllEqual( + progressRefPtr->LastLocation(), pl.GetLastGlobalLocation(), + plSub1.GetLastGlobalLocation(), "Sub2 ended")); + } // End of plSub1 + + MOZ_RELEASE_ASSERT(progressRefPtr->Progress().IsExactlyOne()); + MOZ_RELEASE_ASSERT(pl.GetGlobalProgress().IsExactlyOne()); + MOZ_RELEASE_ASSERT(AreAllEqual(progressRefPtr->LastLocation(), + pl.GetLastGlobalLocation(), "Sub1 ended")); + + const auto loopStart = 75_pc; + const auto loopEnd = 87.5_pc; + const uint32_t loopCount = 8; + uint32_t expectedIndex = 0u; + auto expectedIterationStart = loopStart; + const auto iterationIncrement = (loopEnd - loopStart) / loopCount; + for (auto&& [index, loopPL] : pl.CreateLoopSubLoggersFromTo( + loopStart, loopEnd, loopCount, "looping...")) { + MOZ_RELEASE_ASSERT(index == expectedIndex); + ++expectedIndex; + MOZ_RELEASE_ASSERT( + AreAllEqual(progressRefPtr->Progress(), pl.GetGlobalProgress(), + loopPL.GetGlobalProgress(), expectedIterationStart)); + MOZ_RELEASE_ASSERT(AreAllEqual( + progressRefPtr->LastLocation(), pl.GetLastGlobalLocation(), + loopPL.GetLastGlobalLocation(), "looping...")); + + loopPL.SetLocalProgress(50_pc, "half"); + MOZ_RELEASE_ASSERT(loopPL.GetGlobalProgress() == + expectedIterationStart + iterationIncrement / 2u); + MOZ_RELEASE_ASSERT( + AreAllEqual(progressRefPtr->Progress(), pl.GetGlobalProgress(), + loopPL.GetGlobalProgress(), + expectedIterationStart + iterationIncrement / 2u)); + MOZ_RELEASE_ASSERT(AreAllEqual(progressRefPtr->LastLocation(), + pl.GetLastGlobalLocation(), + loopPL.GetLastGlobalLocation(), "half")); + + expectedIterationStart = expectedIterationStart + iterationIncrement; + } + MOZ_RELEASE_ASSERT(AreAllEqual(progressRefPtr->Progress(), + pl.GetGlobalProgress(), + expectedIterationStart)); + MOZ_RELEASE_ASSERT(AreAllEqual(progressRefPtr->LastLocation(), + pl.GetLastGlobalLocation(), "looping...")); + } // End of pl + MOZ_RELEASE_ASSERT(progressRefPtr->Progress().IsExactlyOne()); + MOZ_RELEASE_ASSERT(AreAllEqual(progressRefPtr->LastLocation(), "All done")); + + printf("TestProgressLogger done\n"); +} + +#ifdef MOZ_GECKO_PROFILER + +MOZ_MAYBE_UNUSED static void SleepMilli(unsigned aMilliseconds) { +# if defined(_MSC_VER) || defined(__MINGW32__) + Sleep(aMilliseconds); +# else + struct timespec ts = {/* .tv_sec */ static_cast<time_t>(aMilliseconds / 1000), + /* ts.tv_nsec */ long(aMilliseconds % 1000) * 1000000}; + struct timespec tr = {0, 0}; + while (nanosleep(&ts, &tr)) { + if (errno == EINTR) { + ts = tr; + } else { + printf("nanosleep() -> %s\n", strerror(errno)); + exit(1); + } + } +# endif +} + +MOZ_MAYBE_UNUSED static void WaitUntilTimeStampChanges( + const mozilla::TimeStamp& aTimeStampToCompare = mozilla::TimeStamp::Now()) { + while (aTimeStampToCompare == mozilla::TimeStamp::Now()) { + SleepMilli(1); + } +} + +using namespace mozilla; + +void TestPowerOfTwoMask() { + printf("TestPowerOfTwoMask...\n"); + + static_assert(MakePowerOfTwoMask<uint32_t, 0>().MaskValue() == 0); + constexpr PowerOfTwoMask<uint32_t> c0 = MakePowerOfTwoMask<uint32_t, 0>(); + MOZ_RELEASE_ASSERT(c0.MaskValue() == 0); + + static_assert(MakePowerOfTwoMask<uint32_t, 0xFFu>().MaskValue() == 0xFFu); + constexpr PowerOfTwoMask<uint32_t> cFF = + MakePowerOfTwoMask<uint32_t, 0xFFu>(); + MOZ_RELEASE_ASSERT(cFF.MaskValue() == 0xFFu); + + static_assert(MakePowerOfTwoMask<uint32_t, 0xFFFFFFFFu>().MaskValue() == + 0xFFFFFFFFu); + constexpr PowerOfTwoMask<uint32_t> cFFFFFFFF = + MakePowerOfTwoMask<uint32_t, 0xFFFFFFFFu>(); + MOZ_RELEASE_ASSERT(cFFFFFFFF.MaskValue() == 0xFFFFFFFFu); + + struct TestDataU32 { + uint32_t mInput; + uint32_t mMask; + }; + // clang-format off + TestDataU32 tests[] = { + { 0, 0 }, + { 1, 1 }, + { 2, 3 }, + { 3, 3 }, + { 4, 7 }, + { 5, 7 }, + { (1u << 31) - 1, (1u << 31) - 1 }, + { (1u << 31), uint32_t(-1) }, + { (1u << 31) + 1, uint32_t(-1) }, + { uint32_t(-1), uint32_t(-1) } + }; + // clang-format on + for (const TestDataU32& test : tests) { + PowerOfTwoMask<uint32_t> p2m(test.mInput); + MOZ_RELEASE_ASSERT(p2m.MaskValue() == test.mMask); + for (const TestDataU32& inner : tests) { + if (p2m.MaskValue() != uint32_t(-1)) { + MOZ_RELEASE_ASSERT((inner.mInput % p2m) == + (inner.mInput % (p2m.MaskValue() + 1))); + } + MOZ_RELEASE_ASSERT((inner.mInput & p2m) == (inner.mInput % p2m)); + MOZ_RELEASE_ASSERT((p2m & inner.mInput) == (inner.mInput & p2m)); + } + } + + printf("TestPowerOfTwoMask done\n"); +} + +void TestPowerOfTwo() { + printf("TestPowerOfTwo...\n"); + + static_assert(MakePowerOfTwo<uint32_t, 1>().Value() == 1); + constexpr PowerOfTwo<uint32_t> c1 = MakePowerOfTwo<uint32_t, 1>(); + MOZ_RELEASE_ASSERT(c1.Value() == 1); + static_assert(MakePowerOfTwo<uint32_t, 1>().Mask().MaskValue() == 0); + + static_assert(MakePowerOfTwo<uint32_t, 128>().Value() == 128); + constexpr PowerOfTwo<uint32_t> c128 = MakePowerOfTwo<uint32_t, 128>(); + MOZ_RELEASE_ASSERT(c128.Value() == 128); + static_assert(MakePowerOfTwo<uint32_t, 128>().Mask().MaskValue() == 127); + + static_assert(MakePowerOfTwo<uint32_t, 0x80000000u>().Value() == 0x80000000u); + constexpr PowerOfTwo<uint32_t> cMax = MakePowerOfTwo<uint32_t, 0x80000000u>(); + MOZ_RELEASE_ASSERT(cMax.Value() == 0x80000000u); + static_assert(MakePowerOfTwo<uint32_t, 0x80000000u>().Mask().MaskValue() == + 0x7FFFFFFFu); + + struct TestDataU32 { + uint32_t mInput; + uint32_t mValue; + uint32_t mMask; + }; + // clang-format off + TestDataU32 tests[] = { + { 0, 1, 0 }, + { 1, 1, 0 }, + { 2, 2, 1 }, + { 3, 4, 3 }, + { 4, 4, 3 }, + { 5, 8, 7 }, + { (1u << 31) - 1, (1u << 31), (1u << 31) - 1 }, + { (1u << 31), (1u << 31), (1u << 31) - 1 }, + { (1u << 31) + 1, (1u << 31), (1u << 31) - 1 }, + { uint32_t(-1), (1u << 31), (1u << 31) - 1 } + }; + // clang-format on + for (const TestDataU32& test : tests) { + PowerOfTwo<uint32_t> p2(test.mInput); + MOZ_RELEASE_ASSERT(p2.Value() == test.mValue); + MOZ_RELEASE_ASSERT(p2.MaskValue() == test.mMask); + PowerOfTwoMask<uint32_t> p2m = p2.Mask(); + MOZ_RELEASE_ASSERT(p2m.MaskValue() == test.mMask); + for (const TestDataU32& inner : tests) { + MOZ_RELEASE_ASSERT((inner.mInput % p2) == (inner.mInput % p2.Value())); + } + } + + printf("TestPowerOfTwo done\n"); +} + +void TestLEB128() { + printf("TestLEB128...\n"); + + MOZ_RELEASE_ASSERT(ULEB128MaxSize<uint8_t>() == 2); + MOZ_RELEASE_ASSERT(ULEB128MaxSize<uint16_t>() == 3); + MOZ_RELEASE_ASSERT(ULEB128MaxSize<uint32_t>() == 5); + MOZ_RELEASE_ASSERT(ULEB128MaxSize<uint64_t>() == 10); + + struct TestDataU64 { + uint64_t mValue; + unsigned mSize; + const char* mBytes; + }; + // clang-format off + TestDataU64 tests[] = { + // Small numbers should keep their normal byte representation. + { 0u, 1, "\0" }, + { 1u, 1, "\x01" }, + + // 0111 1111 (127, or 0x7F) is the highest number that fits into a single + // LEB128 byte. It gets encoded as 0111 1111, note the most significant bit + // is off. + { 0x7Fu, 1, "\x7F" }, + + // Next number: 128, or 0x80. + // Original data representation: 1000 0000 + // Broken up into groups of 7: 1 0000000 + // Padded with 0 (msB) or 1 (lsB): 00000001 10000000 + // Byte representation: 0x01 0x80 + // Little endian order: -> 0x80 0x01 + { 0x80u, 2, "\x80\x01" }, + + // Next: 129, or 0x81 (showing that we don't lose low bits.) + // Original data representation: 1000 0001 + // Broken up into groups of 7: 1 0000001 + // Padded with 0 (msB) or 1 (lsB): 00000001 10000001 + // Byte representation: 0x01 0x81 + // Little endian order: -> 0x81 0x01 + { 0x81u, 2, "\x81\x01" }, + + // Highest 8-bit number: 255, or 0xFF. + // Original data representation: 1111 1111 + // Broken up into groups of 7: 1 1111111 + // Padded with 0 (msB) or 1 (lsB): 00000001 11111111 + // Byte representation: 0x01 0xFF + // Little endian order: -> 0xFF 0x01 + { 0xFFu, 2, "\xFF\x01" }, + + // Next: 256, or 0x100. + // Original data representation: 1 0000 0000 + // Broken up into groups of 7: 10 0000000 + // Padded with 0 (msB) or 1 (lsB): 00000010 10000000 + // Byte representation: 0x10 0x80 + // Little endian order: -> 0x80 0x02 + { 0x100u, 2, "\x80\x02" }, + + // Highest 32-bit number: 0xFFFFFFFF (8 bytes, all bits set). + // Original: 1111 1111 1111 1111 1111 1111 1111 1111 + // Groups: 1111 1111111 1111111 1111111 1111111 + // Padded: 00001111 11111111 11111111 11111111 11111111 + // Bytes: 0x0F 0xFF 0xFF 0xFF 0xFF + // Little Endian: -> 0xFF 0xFF 0xFF 0xFF 0x0F + { 0xFFFFFFFFu, 5, "\xFF\xFF\xFF\xFF\x0F" }, + + // Highest 64-bit number: 0xFFFFFFFFFFFFFFFF (16 bytes, all bits set). + // 64 bits, that's 9 groups of 7 bits, plus 1 (most significant) bit. + { 0xFFFFFFFFFFFFFFFFu, 10, "\xFF\xFF\xFF\xFF\xFF\xFF\xFF\xFF\xFF\x01" } + }; + // clang-format on + + for (const TestDataU64& test : tests) { + MOZ_RELEASE_ASSERT(ULEB128Size(test.mValue) == test.mSize); + // Prepare a buffer that can accomodate the largest-possible LEB128. + uint8_t buffer[ULEB128MaxSize<uint64_t>()]; + // Use a pointer into the buffer as iterator. + uint8_t* p = buffer; + // And write the LEB128. + WriteULEB128(test.mValue, p); + // Pointer (iterator) should have advanced just past the expected LEB128 + // size. + MOZ_RELEASE_ASSERT(p == buffer + test.mSize); + // Check expected bytes. + for (unsigned i = 0; i < test.mSize; ++i) { + MOZ_RELEASE_ASSERT(buffer[i] == uint8_t(test.mBytes[i])); + } + + // Move pointer (iterator) back to start of buffer. + p = buffer; + // And read the LEB128 we wrote above. + uint64_t read = ReadULEB128<uint64_t>(p); + // Pointer (iterator) should have also advanced just past the expected + // LEB128 size. + MOZ_RELEASE_ASSERT(p == buffer + test.mSize); + // And check the read value. + MOZ_RELEASE_ASSERT(read == test.mValue); + + // Testing ULEB128 reader. + ULEB128Reader<uint64_t> reader; + MOZ_RELEASE_ASSERT(!reader.IsComplete()); + // Move pointer back to start of buffer. + p = buffer; + for (;;) { + // Read a byte and feed it to the reader. + if (reader.FeedByteIsComplete(*p++)) { + break; + } + // Not complete yet, we shouldn't have reached the end pointer. + MOZ_RELEASE_ASSERT(!reader.IsComplete()); + MOZ_RELEASE_ASSERT(p < buffer + test.mSize); + } + MOZ_RELEASE_ASSERT(reader.IsComplete()); + // Pointer should have advanced just past the expected LEB128 size. + MOZ_RELEASE_ASSERT(p == buffer + test.mSize); + // And check the read value. + MOZ_RELEASE_ASSERT(reader.Value() == test.mValue); + + // And again after a Reset. + reader.Reset(); + MOZ_RELEASE_ASSERT(!reader.IsComplete()); + p = buffer; + for (;;) { + if (reader.FeedByteIsComplete(*p++)) { + break; + } + MOZ_RELEASE_ASSERT(!reader.IsComplete()); + MOZ_RELEASE_ASSERT(p < buffer + test.mSize); + } + MOZ_RELEASE_ASSERT(reader.IsComplete()); + MOZ_RELEASE_ASSERT(p == buffer + test.mSize); + MOZ_RELEASE_ASSERT(reader.Value() == test.mValue); + } + + printf("TestLEB128 done\n"); +} + +struct StringWriteFunc final : public JSONWriteFunc { + std::string mString; + + void Write(const mozilla::Span<const char>& aStr) final { + mString.append(aStr.data(), aStr.size()); + } +}; + +void CheckJSON(mozilla::baseprofiler::SpliceableJSONWriter& aWriter, + const char* aExpected, int aLine) { + const std::string& actual = + static_cast<StringWriteFunc&>(aWriter.WriteFunc()).mString; + if (strcmp(aExpected, actual.c_str()) != 0) { + fprintf(stderr, + "---- EXPECTED ---- (line %d)\n<<<%s>>>\n" + "---- ACTUAL ----\n<<<%s>>>\n", + aLine, aExpected, actual.c_str()); + MOZ_RELEASE_ASSERT(false, "expected and actual output don't match"); + } +} + +void TestJSONTimeOutput() { + printf("TestJSONTimeOutput...\n"); + +# define TEST(in, out) \ + do { \ + mozilla::baseprofiler::SpliceableJSONWriter writer( \ + mozilla::MakeUnique<StringWriteFunc>(), \ + FailureLatchInfallibleSource::Singleton()); \ + writer.Start(); \ + writer.TimeDoubleMsProperty("time_ms", (in)); \ + writer.End(); \ + CheckJSON(writer, "{\"time_ms\":" out "}", __LINE__); \ + } while (false); + + TEST(0, "0"); + + TEST(0.000'000'1, "0"); + TEST(0.000'000'4, "0"); + TEST(0.000'000'499, "0"); + TEST(0.000'000'5, "0.000001"); + TEST(0.000'001, "0.000001"); + TEST(0.000'01, "0.00001"); + TEST(0.000'1, "0.0001"); + TEST(0.001, "0.001"); + TEST(0.01, "0.01"); + TEST(0.1, "0.1"); + TEST(1, "1"); + TEST(2, "2"); + TEST(10, "10"); + TEST(100, "100"); + TEST(1'000, "1000"); + TEST(10'000, "10000"); + TEST(100'000, "100000"); + TEST(1'000'000, "1000000"); + // 2^53-2 ns in ms. 2^53-1 is the highest integer value representable in + // double, -1 again because we're adding 0.5 before truncating. + // That's 104 days, after which the nanosecond precision would decrease. + TEST(9'007'199'254.740'990, "9007199254.74099"); + + TEST(-0.000'000'1, "0"); + TEST(-0.000'000'4, "0"); + TEST(-0.000'000'499, "0"); + TEST(-0.000'000'5, "-0.000001"); + TEST(-0.000'001, "-0.000001"); + TEST(-0.000'01, "-0.00001"); + TEST(-0.000'1, "-0.0001"); + TEST(-0.001, "-0.001"); + TEST(-0.01, "-0.01"); + TEST(-0.1, "-0.1"); + TEST(-1, "-1"); + TEST(-2, "-2"); + TEST(-10, "-10"); + TEST(-100, "-100"); + TEST(-1'000, "-1000"); + TEST(-10'000, "-10000"); + TEST(-100'000, "-100000"); + TEST(-1'000'000, "-1000000"); + TEST(-9'007'199'254.740'990, "-9007199254.74099"); + +# undef TEST + + printf("TestJSONTimeOutput done\n"); +} + +template <uint8_t byte, uint8_t... tail> +constexpr bool TestConstexprULEB128Reader(ULEB128Reader<uint64_t>& aReader) { + if (aReader.IsComplete()) { + return false; + } + const bool isComplete = aReader.FeedByteIsComplete(byte); + if (aReader.IsComplete() != isComplete) { + return false; + } + if constexpr (sizeof...(tail) == 0) { + return isComplete; + } else { + if (isComplete) { + return false; + } + return TestConstexprULEB128Reader<tail...>(aReader); + } +} + +template <uint64_t expected, uint8_t... bytes> +constexpr bool TestConstexprULEB128Reader() { + ULEB128Reader<uint64_t> reader; + if (!TestConstexprULEB128Reader<bytes...>(reader)) { + return false; + } + if (!reader.IsComplete()) { + return false; + } + if (reader.Value() != expected) { + return false; + } + + reader.Reset(); + if (!TestConstexprULEB128Reader<bytes...>(reader)) { + return false; + } + if (!reader.IsComplete()) { + return false; + } + if (reader.Value() != expected) { + return false; + } + + return true; +} + +static_assert(TestConstexprULEB128Reader<0x0u, 0x0u>()); +static_assert(!TestConstexprULEB128Reader<0x0u, 0x0u, 0x0u>()); +static_assert(TestConstexprULEB128Reader<0x1u, 0x1u>()); +static_assert(TestConstexprULEB128Reader<0x7Fu, 0x7Fu>()); +static_assert(TestConstexprULEB128Reader<0x80u, 0x80u, 0x01u>()); +static_assert(!TestConstexprULEB128Reader<0x80u, 0x80u>()); +static_assert(!TestConstexprULEB128Reader<0x80u, 0x01u>()); +static_assert(TestConstexprULEB128Reader<0x81u, 0x81u, 0x01u>()); +static_assert(TestConstexprULEB128Reader<0xFFu, 0xFFu, 0x01u>()); +static_assert(TestConstexprULEB128Reader<0x100u, 0x80u, 0x02u>()); +static_assert(TestConstexprULEB128Reader<0xFFFFFFFFu, 0xFFu, 0xFFu, 0xFFu, + 0xFFu, 0x0Fu>()); +static_assert( + !TestConstexprULEB128Reader<0xFFFFFFFFu, 0xFFu, 0xFFu, 0xFFu, 0xFFu>()); +static_assert(!TestConstexprULEB128Reader<0xFFFFFFFFu, 0xFFu, 0xFFu, 0xFFu, + 0xFFu, 0xFFu, 0x0Fu>()); +static_assert( + TestConstexprULEB128Reader<0xFFFFFFFFFFFFFFFFu, 0xFFu, 0xFFu, 0xFFu, 0xFFu, + 0xFFu, 0xFFu, 0xFFu, 0xFFu, 0xFFu, 0x01u>()); +static_assert( + !TestConstexprULEB128Reader<0xFFFFFFFFFFFFFFFFu, 0xFFu, 0xFFu, 0xFFu, 0xFFu, + 0xFFu, 0xFFu, 0xFFu, 0xFFu, 0xFFu>()); + +static void TestChunk() { + printf("TestChunk...\n"); + + static_assert(!std::is_default_constructible_v<ProfileBufferChunk>, + "ProfileBufferChunk should not be default-constructible"); + static_assert( + !std::is_constructible_v<ProfileBufferChunk, ProfileBufferChunk::Length>, + "ProfileBufferChunk should not be constructible from Length"); + + static_assert( + sizeof(ProfileBufferChunk::Header) == + sizeof(ProfileBufferChunk::Header::mOffsetFirstBlock) + + sizeof(ProfileBufferChunk::Header::mOffsetPastLastBlock) + + sizeof(ProfileBufferChunk::Header::mStartTimeStamp) + + sizeof(ProfileBufferChunk::Header::mDoneTimeStamp) + + sizeof(ProfileBufferChunk::Header::mBufferBytes) + + sizeof(ProfileBufferChunk::Header::mBlockCount) + + sizeof(ProfileBufferChunk::Header::mRangeStart) + + sizeof(ProfileBufferChunk::Header::mProcessId) + + sizeof(ProfileBufferChunk::Header::mPADDING), + "ProfileBufferChunk::Header may have unwanted padding, please review"); + // Note: The above static_assert is an attempt at keeping + // ProfileBufferChunk::Header tightly packed, but some changes could make this + // impossible to achieve (most probably due to alignment) -- Just do your + // best! + + constexpr ProfileBufferChunk::Length TestLen = 1000; + + // Basic allocations of different sizes. + for (ProfileBufferChunk::Length len = 0; len <= TestLen; ++len) { + auto chunk = ProfileBufferChunk::Create(len); + static_assert( + std::is_same_v<decltype(chunk), UniquePtr<ProfileBufferChunk>>, + "ProfileBufferChunk::Create() should return a " + "UniquePtr<ProfileBufferChunk>"); + MOZ_RELEASE_ASSERT(!!chunk, "OOM!?"); + MOZ_RELEASE_ASSERT(chunk->BufferBytes() >= len); + MOZ_RELEASE_ASSERT(chunk->ChunkBytes() >= + len + ProfileBufferChunk::SizeofChunkMetadata()); + MOZ_RELEASE_ASSERT(chunk->RemainingBytes() == chunk->BufferBytes()); + MOZ_RELEASE_ASSERT(chunk->OffsetFirstBlock() == 0); + MOZ_RELEASE_ASSERT(chunk->OffsetPastLastBlock() == 0); + MOZ_RELEASE_ASSERT(chunk->BlockCount() == 0); + MOZ_RELEASE_ASSERT(chunk->ProcessId() == 0); + MOZ_RELEASE_ASSERT(chunk->RangeStart() == 0); + MOZ_RELEASE_ASSERT(chunk->BufferSpan().LengthBytes() == + chunk->BufferBytes()); + MOZ_RELEASE_ASSERT(!chunk->GetNext()); + MOZ_RELEASE_ASSERT(!chunk->ReleaseNext()); + MOZ_RELEASE_ASSERT(chunk->Last() == chunk.get()); + } + + // Allocate the main test Chunk. + auto chunkA = ProfileBufferChunk::Create(TestLen); + MOZ_RELEASE_ASSERT(!!chunkA, "OOM!?"); + MOZ_RELEASE_ASSERT(chunkA->BufferBytes() >= TestLen); + MOZ_RELEASE_ASSERT(chunkA->ChunkBytes() >= + TestLen + ProfileBufferChunk::SizeofChunkMetadata()); + MOZ_RELEASE_ASSERT(!chunkA->GetNext()); + MOZ_RELEASE_ASSERT(!chunkA->ReleaseNext()); + + constexpr ProfileBufferIndex chunkARangeStart = 12345; + chunkA->SetRangeStart(chunkARangeStart); + MOZ_RELEASE_ASSERT(chunkA->RangeStart() == chunkARangeStart); + + // Get a read-only span over its buffer. + auto bufferA = chunkA->BufferSpan(); + static_assert( + std::is_same_v<decltype(bufferA), Span<const ProfileBufferChunk::Byte>>, + "BufferSpan() should return a Span<const Byte>"); + MOZ_RELEASE_ASSERT(bufferA.LengthBytes() == chunkA->BufferBytes()); + + // Add the initial tail block. + constexpr ProfileBufferChunk::Length initTailLen = 10; + auto initTail = chunkA->ReserveInitialBlockAsTail(initTailLen); + static_assert( + std::is_same_v<decltype(initTail), Span<ProfileBufferChunk::Byte>>, + "ReserveInitialBlockAsTail() should return a Span<Byte>"); + MOZ_RELEASE_ASSERT(initTail.LengthBytes() == initTailLen); + MOZ_RELEASE_ASSERT(initTail.Elements() == bufferA.Elements()); + MOZ_RELEASE_ASSERT(chunkA->OffsetFirstBlock() == initTailLen); + MOZ_RELEASE_ASSERT(chunkA->OffsetPastLastBlock() == initTailLen); + + // Add the first complete block. + constexpr ProfileBufferChunk::Length block1Len = 20; + auto block1 = chunkA->ReserveBlock(block1Len); + static_assert( + std::is_same_v<decltype(block1), ProfileBufferChunk::ReserveReturn>, + "ReserveBlock() should return a ReserveReturn"); + MOZ_RELEASE_ASSERT(block1.mBlockRangeIndex.ConvertToProfileBufferIndex() == + chunkARangeStart + initTailLen); + MOZ_RELEASE_ASSERT(block1.mSpan.LengthBytes() == block1Len); + MOZ_RELEASE_ASSERT(block1.mSpan.Elements() == + bufferA.Elements() + initTailLen); + MOZ_RELEASE_ASSERT(chunkA->OffsetFirstBlock() == initTailLen); + MOZ_RELEASE_ASSERT(chunkA->OffsetPastLastBlock() == initTailLen + block1Len); + MOZ_RELEASE_ASSERT(chunkA->RemainingBytes() != 0); + + // Add another block to over-fill the ProfileBufferChunk. + const ProfileBufferChunk::Length remaining = + chunkA->BufferBytes() - (initTailLen + block1Len); + constexpr ProfileBufferChunk::Length overfill = 30; + const ProfileBufferChunk::Length block2Len = remaining + overfill; + ProfileBufferChunk::ReserveReturn block2 = chunkA->ReserveBlock(block2Len); + MOZ_RELEASE_ASSERT(block2.mBlockRangeIndex.ConvertToProfileBufferIndex() == + chunkARangeStart + initTailLen + block1Len); + MOZ_RELEASE_ASSERT(block2.mSpan.LengthBytes() == remaining); + MOZ_RELEASE_ASSERT(block2.mSpan.Elements() == + bufferA.Elements() + initTailLen + block1Len); + MOZ_RELEASE_ASSERT(chunkA->OffsetFirstBlock() == initTailLen); + MOZ_RELEASE_ASSERT(chunkA->OffsetPastLastBlock() == chunkA->BufferBytes()); + MOZ_RELEASE_ASSERT(chunkA->RemainingBytes() == 0); + + // Block must be marked "done" before it can be recycled. + chunkA->MarkDone(); + + // It must be marked "recycled" before data can be added to it again. + chunkA->MarkRecycled(); + + // Add an empty initial tail block. + Span<ProfileBufferChunk::Byte> initTail2 = + chunkA->ReserveInitialBlockAsTail(0); + MOZ_RELEASE_ASSERT(initTail2.LengthBytes() == 0); + MOZ_RELEASE_ASSERT(initTail2.Elements() == bufferA.Elements()); + MOZ_RELEASE_ASSERT(chunkA->OffsetFirstBlock() == 0); + MOZ_RELEASE_ASSERT(chunkA->OffsetPastLastBlock() == 0); + + // Block must be marked "done" before it can be destroyed. + chunkA->MarkDone(); + + chunkA->SetProcessId(123); + MOZ_RELEASE_ASSERT(chunkA->ProcessId() == 123); + + printf("TestChunk done\n"); +} + +static void TestChunkManagerSingle() { + printf("TestChunkManagerSingle...\n"); + + // Construct a ProfileBufferChunkManagerSingle for one chunk of size >=1000. + constexpr ProfileBufferChunk::Length ChunkMinBufferBytes = 1000; + ProfileBufferChunkManagerSingle cms{ChunkMinBufferBytes}; + + // Reference to base class, to exercize virtual methods. + ProfileBufferChunkManager& cm = cms; + +# ifdef DEBUG + const char* chunkManagerRegisterer = "TestChunkManagerSingle"; + cm.RegisteredWith(chunkManagerRegisterer); +# endif // DEBUG + + const auto maxTotalSize = cm.MaxTotalSize(); + MOZ_RELEASE_ASSERT(maxTotalSize >= ChunkMinBufferBytes); + + cm.SetChunkDestroyedCallback([](const ProfileBufferChunk&) { + MOZ_RELEASE_ASSERT( + false, + "ProfileBufferChunkManagerSingle should never destroy its one chunk"); + }); + + UniquePtr<ProfileBufferChunk> extantReleasedChunks = + cm.GetExtantReleasedChunks(); + MOZ_RELEASE_ASSERT(!extantReleasedChunks, "Unexpected released chunk(s)"); + + // First request. + UniquePtr<ProfileBufferChunk> chunk = cm.GetChunk(); + MOZ_RELEASE_ASSERT(!!chunk, "First chunk request should always work"); + MOZ_RELEASE_ASSERT(chunk->BufferBytes() >= ChunkMinBufferBytes, + "Unexpected chunk size"); + MOZ_RELEASE_ASSERT(!chunk->GetNext(), "There should only be one chunk"); + + // Keep address, for later checks. + const uintptr_t chunkAddress = reinterpret_cast<uintptr_t>(chunk.get()); + + extantReleasedChunks = cm.GetExtantReleasedChunks(); + MOZ_RELEASE_ASSERT(!extantReleasedChunks, "Unexpected released chunk(s)"); + + // Second request. + MOZ_RELEASE_ASSERT(!cm.GetChunk(), "Second chunk request should always fail"); + + extantReleasedChunks = cm.GetExtantReleasedChunks(); + MOZ_RELEASE_ASSERT(!extantReleasedChunks, "Unexpected released chunk(s)"); + + // Add some data to the chunk (to verify recycling later on). + MOZ_RELEASE_ASSERT(chunk->ChunkHeader().mOffsetFirstBlock == 0); + MOZ_RELEASE_ASSERT(chunk->ChunkHeader().mOffsetPastLastBlock == 0); + MOZ_RELEASE_ASSERT(chunk->RangeStart() == 0); + chunk->SetRangeStart(100); + MOZ_RELEASE_ASSERT(chunk->RangeStart() == 100); + Unused << chunk->ReserveInitialBlockAsTail(1); + Unused << chunk->ReserveBlock(2); + MOZ_RELEASE_ASSERT(chunk->ChunkHeader().mOffsetFirstBlock == 1); + MOZ_RELEASE_ASSERT(chunk->ChunkHeader().mOffsetPastLastBlock == 1 + 2); + + // Release the first chunk. + chunk->MarkDone(); + cm.ReleaseChunk(std::move(chunk)); + MOZ_RELEASE_ASSERT(!chunk, "chunk UniquePtr should have been moved-from"); + + // Request after release. + MOZ_RELEASE_ASSERT(!cm.GetChunk(), + "Chunk request after release should also fail"); + + // Check released chunk. + extantReleasedChunks = cm.GetExtantReleasedChunks(); + MOZ_RELEASE_ASSERT(!!extantReleasedChunks, + "Could not retrieve released chunk"); + MOZ_RELEASE_ASSERT(!extantReleasedChunks->GetNext(), + "There should only be one released chunk"); + MOZ_RELEASE_ASSERT( + reinterpret_cast<uintptr_t>(extantReleasedChunks.get()) == chunkAddress, + "Released chunk should be first requested one"); + + MOZ_RELEASE_ASSERT(!cm.GetExtantReleasedChunks(), + "Unexpected extra released chunk(s)"); + + // Another request after release. + MOZ_RELEASE_ASSERT(!cm.GetChunk(), + "Chunk request after release should also fail"); + + MOZ_RELEASE_ASSERT( + cm.MaxTotalSize() == maxTotalSize, + "MaxTotalSize() should not change after requests&releases"); + + // Reset the chunk manager. (Single-only non-virtual function.) + cms.Reset(std::move(extantReleasedChunks)); + MOZ_RELEASE_ASSERT(!extantReleasedChunks, + "Released chunk UniquePtr should have been moved-from"); + + MOZ_RELEASE_ASSERT( + cm.MaxTotalSize() == maxTotalSize, + "MaxTotalSize() should not change when resetting with the same chunk"); + + // 2nd round, first request. Theoretically async, but this implementation just + // immediately runs the callback. + bool ran = false; + cm.RequestChunk([&](UniquePtr<ProfileBufferChunk> aChunk) { + ran = true; + MOZ_RELEASE_ASSERT(!!aChunk); + chunk = std::move(aChunk); + }); + MOZ_RELEASE_ASSERT(ran, "RequestChunk callback not called immediately"); + ran = false; + cm.FulfillChunkRequests(); + MOZ_RELEASE_ASSERT(!ran, "FulfillChunkRequests should not have any effects"); + MOZ_RELEASE_ASSERT(!!chunk, "First chunk request should always work"); + MOZ_RELEASE_ASSERT(chunk->BufferBytes() >= ChunkMinBufferBytes, + "Unexpected chunk size"); + MOZ_RELEASE_ASSERT(!chunk->GetNext(), "There should only be one chunk"); + MOZ_RELEASE_ASSERT(reinterpret_cast<uintptr_t>(chunk.get()) == chunkAddress, + "Requested chunk should be first requested one"); + // Verify that chunk is empty and usable. + MOZ_RELEASE_ASSERT(chunk->ChunkHeader().mOffsetFirstBlock == 0); + MOZ_RELEASE_ASSERT(chunk->ChunkHeader().mOffsetPastLastBlock == 0); + MOZ_RELEASE_ASSERT(chunk->RangeStart() == 0); + chunk->SetRangeStart(200); + MOZ_RELEASE_ASSERT(chunk->RangeStart() == 200); + Unused << chunk->ReserveInitialBlockAsTail(3); + Unused << chunk->ReserveBlock(4); + MOZ_RELEASE_ASSERT(chunk->ChunkHeader().mOffsetFirstBlock == 3); + MOZ_RELEASE_ASSERT(chunk->ChunkHeader().mOffsetPastLastBlock == 3 + 4); + + // Second request. + ran = false; + cm.RequestChunk([&](UniquePtr<ProfileBufferChunk> aChunk) { + ran = true; + MOZ_RELEASE_ASSERT(!aChunk, "Second chunk request should always fail"); + }); + MOZ_RELEASE_ASSERT(ran, "RequestChunk callback not called"); + + // This one does nothing. + cm.ForgetUnreleasedChunks(); + + // Don't forget to mark chunk "Done" before letting it die. + chunk->MarkDone(); + chunk = nullptr; + + // Create a tiny chunk and reset the chunk manager with it. + chunk = ProfileBufferChunk::Create(1); + MOZ_RELEASE_ASSERT(!!chunk); + auto tinyChunkSize = chunk->BufferBytes(); + MOZ_RELEASE_ASSERT(tinyChunkSize >= 1); + MOZ_RELEASE_ASSERT(tinyChunkSize < ChunkMinBufferBytes); + MOZ_RELEASE_ASSERT(chunk->RangeStart() == 0); + chunk->SetRangeStart(300); + MOZ_RELEASE_ASSERT(chunk->RangeStart() == 300); + cms.Reset(std::move(chunk)); + MOZ_RELEASE_ASSERT(!chunk, "chunk UniquePtr should have been moved-from"); + MOZ_RELEASE_ASSERT(cm.MaxTotalSize() == tinyChunkSize, + "MaxTotalSize() should match the new chunk size"); + chunk = cm.GetChunk(); + MOZ_RELEASE_ASSERT(chunk->RangeStart() == 0, "Got non-recycled chunk"); + + // Enough testing! Clean-up. + Unused << chunk->ReserveInitialBlockAsTail(0); + chunk->MarkDone(); + cm.ForgetUnreleasedChunks(); + +# ifdef DEBUG + cm.DeregisteredFrom(chunkManagerRegisterer); +# endif // DEBUG + + printf("TestChunkManagerSingle done\n"); +} + +static void TestChunkManagerWithLocalLimit() { + printf("TestChunkManagerWithLocalLimit...\n"); + + // Construct a ProfileBufferChunkManagerWithLocalLimit with chunk of minimum + // size >=100, up to 1000 bytes. + constexpr ProfileBufferChunk::Length MaxTotalBytes = 1000; + constexpr ProfileBufferChunk::Length ChunkMinBufferBytes = 100; + ProfileBufferChunkManagerWithLocalLimit cmll{MaxTotalBytes, + ChunkMinBufferBytes}; + + // Reference to base class, to exercize virtual methods. + ProfileBufferChunkManager& cm = cmll; + +# ifdef DEBUG + const char* chunkManagerRegisterer = "TestChunkManagerWithLocalLimit"; + cm.RegisteredWith(chunkManagerRegisterer); +# endif // DEBUG + + MOZ_RELEASE_ASSERT(cm.MaxTotalSize() == MaxTotalBytes, + "Max total size should be exactly as given"); + + unsigned destroyedChunks = 0; + unsigned destroyedBytes = 0; + cm.SetChunkDestroyedCallback([&](const ProfileBufferChunk& aChunks) { + for (const ProfileBufferChunk* chunk = &aChunks; chunk; + chunk = chunk->GetNext()) { + destroyedChunks += 1; + destroyedBytes += chunk->BufferBytes(); + } + }); + + UniquePtr<ProfileBufferChunk> extantReleasedChunks = + cm.GetExtantReleasedChunks(); + MOZ_RELEASE_ASSERT(!extantReleasedChunks, "Unexpected released chunk(s)"); + + // First request. + UniquePtr<ProfileBufferChunk> chunk = cm.GetChunk(); + MOZ_RELEASE_ASSERT(!!chunk, + "First chunk immediate request should always work"); + const auto chunkActualBufferBytes = chunk->BufferBytes(); + MOZ_RELEASE_ASSERT(chunkActualBufferBytes >= ChunkMinBufferBytes, + "Unexpected chunk size"); + MOZ_RELEASE_ASSERT(!chunk->GetNext(), "There should only be one chunk"); + + // Keep address, for later checks. + const uintptr_t chunk1Address = reinterpret_cast<uintptr_t>(chunk.get()); + + extantReleasedChunks = cm.GetExtantReleasedChunks(); + MOZ_RELEASE_ASSERT(!extantReleasedChunks, "Unexpected released chunk(s)"); + + // Verify that ReleaseChunk accepts zero chunks. + cm.ReleaseChunk(nullptr); + MOZ_RELEASE_ASSERT(!extantReleasedChunks, "Unexpected released chunk(s)"); + + // For this test, we need to be able to get at least 2 chunks without hitting + // the limit. (If this failed, it wouldn't necessary be a problem with + // ProfileBufferChunkManagerWithLocalLimit, fiddle with constants at the top + // of this test.) + MOZ_RELEASE_ASSERT(chunkActualBufferBytes < 2 * MaxTotalBytes); + + unsigned chunk1ReuseCount = 0; + + // We will do enough loops to go through the maximum size a number of times. + const unsigned Rollovers = 3; + const unsigned Loops = Rollovers * MaxTotalBytes / chunkActualBufferBytes; + for (unsigned i = 0; i < Loops; ++i) { + // Add some data to the chunk. + MOZ_RELEASE_ASSERT(chunk->ChunkHeader().mOffsetFirstBlock == 0); + MOZ_RELEASE_ASSERT(chunk->ChunkHeader().mOffsetPastLastBlock == 0); + MOZ_RELEASE_ASSERT(chunk->RangeStart() == 0); + const ProfileBufferIndex index = 1 + i * chunkActualBufferBytes; + chunk->SetRangeStart(index); + MOZ_RELEASE_ASSERT(chunk->RangeStart() == index); + Unused << chunk->ReserveInitialBlockAsTail(1); + Unused << chunk->ReserveBlock(2); + MOZ_RELEASE_ASSERT(chunk->ChunkHeader().mOffsetFirstBlock == 1); + MOZ_RELEASE_ASSERT(chunk->ChunkHeader().mOffsetPastLastBlock == 1 + 2); + + // Request a new chunk. + bool ran = false; + UniquePtr<ProfileBufferChunk> newChunk; + cm.RequestChunk([&](UniquePtr<ProfileBufferChunk> aChunk) { + ran = true; + newChunk = std::move(aChunk); + }); + MOZ_RELEASE_ASSERT( + !ran, "RequestChunk should not immediately fulfill the request"); + cm.FulfillChunkRequests(); + MOZ_RELEASE_ASSERT(ran, "FulfillChunkRequests should invoke the callback"); + MOZ_RELEASE_ASSERT(!!newChunk, "Chunk request should always work"); + MOZ_RELEASE_ASSERT(newChunk->BufferBytes() == chunkActualBufferBytes, + "Unexpected chunk size"); + MOZ_RELEASE_ASSERT(!newChunk->GetNext(), "There should only be one chunk"); + + // Mark previous chunk done and release it. + WaitUntilTimeStampChanges(); // Force "done" timestamp to change. + chunk->MarkDone(); + cm.ReleaseChunk(std::move(chunk)); + + // And cycle to the new chunk. + chunk = std::move(newChunk); + + if (reinterpret_cast<uintptr_t>(chunk.get()) == chunk1Address) { + ++chunk1ReuseCount; + } + } + + // Expect all rollovers except 1 to destroy chunks. + MOZ_RELEASE_ASSERT(destroyedChunks >= (Rollovers - 1) * MaxTotalBytes / + chunkActualBufferBytes, + "Not enough destroyed chunks"); + MOZ_RELEASE_ASSERT(destroyedBytes == destroyedChunks * chunkActualBufferBytes, + "Mismatched destroyed chunks and bytes"); + MOZ_RELEASE_ASSERT(chunk1ReuseCount >= (Rollovers - 1), + "Not enough reuse of the first chunks"); + + // Check that chunk manager is reentrant from request callback. + bool ran = false; + bool ranInner = false; + UniquePtr<ProfileBufferChunk> newChunk; + cm.RequestChunk([&](UniquePtr<ProfileBufferChunk> aChunk) { + ran = true; + MOZ_RELEASE_ASSERT(!!aChunk, "Chunk request should always work"); + Unused << aChunk->ReserveInitialBlockAsTail(0); + WaitUntilTimeStampChanges(); // Force "done" timestamp to change. + aChunk->MarkDone(); + UniquePtr<ProfileBufferChunk> anotherChunk = cm.GetChunk(); + MOZ_RELEASE_ASSERT(!!anotherChunk); + Unused << anotherChunk->ReserveInitialBlockAsTail(0); + WaitUntilTimeStampChanges(); // Force "done" timestamp to change. + anotherChunk->MarkDone(); + cm.RequestChunk([&](UniquePtr<ProfileBufferChunk> aChunk) { + ranInner = true; + MOZ_RELEASE_ASSERT(!!aChunk, "Chunk request should always work"); + Unused << aChunk->ReserveInitialBlockAsTail(0); + WaitUntilTimeStampChanges(); // Force "done" timestamp to change. + aChunk->MarkDone(); + }); + MOZ_RELEASE_ASSERT( + !ranInner, "RequestChunk should not immediately fulfill the request"); + }); + MOZ_RELEASE_ASSERT(!ran, + "RequestChunk should not immediately fulfill the request"); + MOZ_RELEASE_ASSERT( + !ranInner, + "RequestChunk should not immediately fulfill the inner request"); + cm.FulfillChunkRequests(); + MOZ_RELEASE_ASSERT(ran, "FulfillChunkRequests should invoke the callback"); + MOZ_RELEASE_ASSERT(!ranInner, + "FulfillChunkRequests should not immediately fulfill " + "the inner request"); + cm.FulfillChunkRequests(); + MOZ_RELEASE_ASSERT( + ran, "2nd FulfillChunkRequests should invoke the inner request callback"); + + // Enough testing! Clean-up. + Unused << chunk->ReserveInitialBlockAsTail(0); + WaitUntilTimeStampChanges(); // Force "done" timestamp to change. + chunk->MarkDone(); + cm.ForgetUnreleasedChunks(); + + // Special testing of the release algorithm, to make sure released chunks get + // sorted. + constexpr unsigned RandomReleaseChunkLoop = 100; + // Build a vector of chunks, and mark them "done", ready to be released. + Vector<UniquePtr<ProfileBufferChunk>> chunksToRelease; + MOZ_RELEASE_ASSERT(chunksToRelease.reserve(RandomReleaseChunkLoop)); + Vector<TimeStamp> chunksTimeStamps; + MOZ_RELEASE_ASSERT(chunksTimeStamps.reserve(RandomReleaseChunkLoop)); + for (unsigned i = 0; i < RandomReleaseChunkLoop; ++i) { + UniquePtr<ProfileBufferChunk> chunk = cm.GetChunk(); + MOZ_RELEASE_ASSERT(chunk); + Unused << chunk->ReserveInitialBlockAsTail(0); + chunk->MarkDone(); + MOZ_RELEASE_ASSERT(!chunk->ChunkHeader().mDoneTimeStamp.IsNull()); + chunksTimeStamps.infallibleEmplaceBack(chunk->ChunkHeader().mDoneTimeStamp); + chunksToRelease.infallibleEmplaceBack(std::move(chunk)); + if (i % 10 == 0) { + // "Done" timestamps should *usually* increase, let's make extra sure some + // timestamps are actually different. + WaitUntilTimeStampChanges(); + } + } + // Shuffle the list. + std::random_device randomDevice; + std::mt19937 generator(randomDevice()); + std::shuffle(chunksToRelease.begin(), chunksToRelease.end(), generator); + // And release chunks one by one, checking that the list of released chunks + // is always sorted. + printf("TestChunkManagerWithLocalLimit - Shuffle test timestamps:"); + for (unsigned i = 0; i < RandomReleaseChunkLoop; ++i) { + printf(" %f", (chunksToRelease[i]->ChunkHeader().mDoneTimeStamp - + TimeStamp::ProcessCreation()) + .ToMicroseconds()); + cm.ReleaseChunk(std::move(chunksToRelease[i])); + cm.PeekExtantReleasedChunks([i](const ProfileBufferChunk* releasedChunks) { + MOZ_RELEASE_ASSERT(releasedChunks); + unsigned releasedChunkCount = 1; + for (;;) { + const ProfileBufferChunk* nextChunk = releasedChunks->GetNext(); + if (!nextChunk) { + break; + } + ++releasedChunkCount; + MOZ_RELEASE_ASSERT(releasedChunks->ChunkHeader().mDoneTimeStamp <= + nextChunk->ChunkHeader().mDoneTimeStamp); + releasedChunks = nextChunk; + } + MOZ_RELEASE_ASSERT(releasedChunkCount == i + 1); + }); + } + printf("\n"); + // Finally, the whole list of released chunks should have the exact same + // timestamps as the initial list of "done" chunks. + extantReleasedChunks = cm.GetExtantReleasedChunks(); + for (unsigned i = 0; i < RandomReleaseChunkLoop; ++i) { + MOZ_RELEASE_ASSERT(extantReleasedChunks, "Not enough released chunks"); + MOZ_RELEASE_ASSERT(extantReleasedChunks->ChunkHeader().mDoneTimeStamp == + chunksTimeStamps[i]); + Unused << std::exchange(extantReleasedChunks, + extantReleasedChunks->ReleaseNext()); + } + MOZ_RELEASE_ASSERT(!extantReleasedChunks, "Too many released chunks"); + +# ifdef DEBUG + cm.DeregisteredFrom(chunkManagerRegisterer); +# endif // DEBUG + + printf("TestChunkManagerWithLocalLimit done\n"); +} + +static bool IsSameMetadata( + const ProfileBufferControlledChunkManager::ChunkMetadata& a1, + const ProfileBufferControlledChunkManager::ChunkMetadata& a2) { + return a1.mDoneTimeStamp == a2.mDoneTimeStamp && + a1.mBufferBytes == a2.mBufferBytes; +}; + +static bool IsSameUpdate( + const ProfileBufferControlledChunkManager::Update& a1, + const ProfileBufferControlledChunkManager::Update& a2) { + // Final and not-an-update don't carry other data, so we can test these two + // states first. + if (a1.IsFinal() || a2.IsFinal()) { + return a1.IsFinal() && a2.IsFinal(); + } + if (a1.IsNotUpdate() || a2.IsNotUpdate()) { + return a1.IsNotUpdate() && a2.IsNotUpdate(); + } + + // Here, both are "normal" udpates, check member variables: + + if (a1.UnreleasedBytes() != a2.UnreleasedBytes()) { + return false; + } + if (a1.ReleasedBytes() != a2.ReleasedBytes()) { + return false; + } + if (a1.OldestDoneTimeStamp() != a2.OldestDoneTimeStamp()) { + return false; + } + if (a1.NewlyReleasedChunksRef().size() != + a2.NewlyReleasedChunksRef().size()) { + return false; + } + for (unsigned i = 0; i < a1.NewlyReleasedChunksRef().size(); ++i) { + if (!IsSameMetadata(a1.NewlyReleasedChunksRef()[i], + a2.NewlyReleasedChunksRef()[i])) { + return false; + } + } + return true; +} + +static void TestControlledChunkManagerUpdate() { + printf("TestControlledChunkManagerUpdate...\n"); + + using Update = ProfileBufferControlledChunkManager::Update; + + // Default construction. + Update update1; + MOZ_RELEASE_ASSERT(update1.IsNotUpdate()); + MOZ_RELEASE_ASSERT(!update1.IsFinal()); + + // Clear an already-cleared update. + update1.Clear(); + MOZ_RELEASE_ASSERT(update1.IsNotUpdate()); + MOZ_RELEASE_ASSERT(!update1.IsFinal()); + + // Final construction with nullptr. + const Update final(nullptr); + MOZ_RELEASE_ASSERT(final.IsFinal()); + MOZ_RELEASE_ASSERT(!final.IsNotUpdate()); + + // Copy final to cleared. + update1 = final; + MOZ_RELEASE_ASSERT(update1.IsFinal()); + MOZ_RELEASE_ASSERT(!update1.IsNotUpdate()); + + // Copy final to final. + update1 = final; + MOZ_RELEASE_ASSERT(update1.IsFinal()); + MOZ_RELEASE_ASSERT(!update1.IsNotUpdate()); + + // Clear a final update. + update1.Clear(); + MOZ_RELEASE_ASSERT(update1.IsNotUpdate()); + MOZ_RELEASE_ASSERT(!update1.IsFinal()); + + // Move final to cleared. + update1 = Update(nullptr); + MOZ_RELEASE_ASSERT(update1.IsFinal()); + MOZ_RELEASE_ASSERT(!update1.IsNotUpdate()); + + // Move final to final. + update1 = Update(nullptr); + MOZ_RELEASE_ASSERT(update1.IsFinal()); + MOZ_RELEASE_ASSERT(!update1.IsNotUpdate()); + + // Move from not-an-update (effectively same as Clear). + update1 = Update(); + MOZ_RELEASE_ASSERT(update1.IsNotUpdate()); + MOZ_RELEASE_ASSERT(!update1.IsFinal()); + + auto CreateBiggerChunkAfter = [](const ProfileBufferChunk& aChunkToBeat) { + while (TimeStamp::Now() <= aChunkToBeat.ChunkHeader().mDoneTimeStamp) { + ::SleepMilli(1); + } + auto chunk = ProfileBufferChunk::Create(aChunkToBeat.BufferBytes() * 2); + MOZ_RELEASE_ASSERT(!!chunk); + MOZ_RELEASE_ASSERT(chunk->BufferBytes() >= aChunkToBeat.BufferBytes() * 2); + Unused << chunk->ReserveInitialBlockAsTail(0); + chunk->MarkDone(); + MOZ_RELEASE_ASSERT(chunk->ChunkHeader().mDoneTimeStamp > + aChunkToBeat.ChunkHeader().mDoneTimeStamp); + return chunk; + }; + + update1 = Update(1, 2, nullptr, nullptr); + + // Create initial update with 2 released chunks and 1 unreleased chunk. + auto released = ProfileBufferChunk::Create(10); + ProfileBufferChunk* c1 = released.get(); + Unused << c1->ReserveInitialBlockAsTail(0); + c1->MarkDone(); + + released->SetLast(CreateBiggerChunkAfter(*c1)); + ProfileBufferChunk* c2 = c1->GetNext(); + + auto unreleased = CreateBiggerChunkAfter(*c2); + ProfileBufferChunk* c3 = unreleased.get(); + + Update update2(c3->BufferBytes(), c1->BufferBytes() + c2->BufferBytes(), c1, + c1); + MOZ_RELEASE_ASSERT(IsSameUpdate( + update2, + Update(c3->BufferBytes(), c1->BufferBytes() + c2->BufferBytes(), + c1->ChunkHeader().mDoneTimeStamp, + {{c1->ChunkHeader().mDoneTimeStamp, c1->BufferBytes()}, + {c2->ChunkHeader().mDoneTimeStamp, c2->BufferBytes()}}))); + // Check every field, this time only, after that we'll trust that the + // `SameUpdate` test will be enough. + MOZ_RELEASE_ASSERT(!update2.IsNotUpdate()); + MOZ_RELEASE_ASSERT(!update2.IsFinal()); + MOZ_RELEASE_ASSERT(update2.UnreleasedBytes() == c3->BufferBytes()); + MOZ_RELEASE_ASSERT(update2.ReleasedBytes() == + c1->BufferBytes() + c2->BufferBytes()); + MOZ_RELEASE_ASSERT(update2.OldestDoneTimeStamp() == + c1->ChunkHeader().mDoneTimeStamp); + MOZ_RELEASE_ASSERT(update2.NewlyReleasedChunksRef().size() == 2); + MOZ_RELEASE_ASSERT( + IsSameMetadata(update2.NewlyReleasedChunksRef()[0], + {c1->ChunkHeader().mDoneTimeStamp, c1->BufferBytes()})); + MOZ_RELEASE_ASSERT( + IsSameMetadata(update2.NewlyReleasedChunksRef()[1], + {c2->ChunkHeader().mDoneTimeStamp, c2->BufferBytes()})); + + // Fold into not-an-update. + update1.Fold(std::move(update2)); + MOZ_RELEASE_ASSERT(IsSameUpdate( + update1, + Update(c3->BufferBytes(), c1->BufferBytes() + c2->BufferBytes(), + c1->ChunkHeader().mDoneTimeStamp, + {{c1->ChunkHeader().mDoneTimeStamp, c1->BufferBytes()}, + {c2->ChunkHeader().mDoneTimeStamp, c2->BufferBytes()}}))); + + // Pretend nothing happened. + update2 = Update(c3->BufferBytes(), c1->BufferBytes() + c2->BufferBytes(), c1, + nullptr); + MOZ_RELEASE_ASSERT(IsSameUpdate( + update2, Update(c3->BufferBytes(), c1->BufferBytes() + c2->BufferBytes(), + c1->ChunkHeader().mDoneTimeStamp, {}))); + update1.Fold(std::move(update2)); + MOZ_RELEASE_ASSERT(IsSameUpdate( + update1, + Update(c3->BufferBytes(), c1->BufferBytes() + c2->BufferBytes(), + c1->ChunkHeader().mDoneTimeStamp, + {{c1->ChunkHeader().mDoneTimeStamp, c1->BufferBytes()}, + {c2->ChunkHeader().mDoneTimeStamp, c2->BufferBytes()}}))); + + // Pretend there's a new unreleased chunk. + c3->SetLast(CreateBiggerChunkAfter(*c3)); + ProfileBufferChunk* c4 = c3->GetNext(); + update2 = Update(c3->BufferBytes() + c4->BufferBytes(), + c1->BufferBytes() + c2->BufferBytes(), c1, nullptr); + MOZ_RELEASE_ASSERT( + IsSameUpdate(update2, Update(c3->BufferBytes() + c4->BufferBytes(), + c1->BufferBytes() + c2->BufferBytes(), + c1->ChunkHeader().mDoneTimeStamp, {}))); + update1.Fold(std::move(update2)); + MOZ_RELEASE_ASSERT(IsSameUpdate( + update1, + Update(c3->BufferBytes() + c4->BufferBytes(), + c1->BufferBytes() + c2->BufferBytes(), + c1->ChunkHeader().mDoneTimeStamp, + {{c1->ChunkHeader().mDoneTimeStamp, c1->BufferBytes()}, + {c2->ChunkHeader().mDoneTimeStamp, c2->BufferBytes()}}))); + + // Pretend the first unreleased chunk c3 has been released. + released->SetLast(std::exchange(unreleased, unreleased->ReleaseNext())); + update2 = + Update(c4->BufferBytes(), + c1->BufferBytes() + c2->BufferBytes() + c3->BufferBytes(), c1, c3); + MOZ_RELEASE_ASSERT(IsSameUpdate( + update2, + Update(c4->BufferBytes(), + c1->BufferBytes() + c2->BufferBytes() + c3->BufferBytes(), + c1->ChunkHeader().mDoneTimeStamp, + {{c3->ChunkHeader().mDoneTimeStamp, c3->BufferBytes()}}))); + update1.Fold(std::move(update2)); + MOZ_RELEASE_ASSERT(IsSameUpdate( + update1, + Update(c4->BufferBytes(), + c1->BufferBytes() + c2->BufferBytes() + c3->BufferBytes(), + c1->ChunkHeader().mDoneTimeStamp, + {{c1->ChunkHeader().mDoneTimeStamp, c1->BufferBytes()}, + {c2->ChunkHeader().mDoneTimeStamp, c2->BufferBytes()}, + {c3->ChunkHeader().mDoneTimeStamp, c3->BufferBytes()}}))); + + // Pretend c1 has been destroyed, so the oldest timestamp is now at c2. + released = released->ReleaseNext(); + c1 = nullptr; + update2 = Update(c4->BufferBytes(), c2->BufferBytes() + c3->BufferBytes(), c2, + nullptr); + MOZ_RELEASE_ASSERT(IsSameUpdate( + update2, Update(c4->BufferBytes(), c2->BufferBytes() + c3->BufferBytes(), + c2->ChunkHeader().mDoneTimeStamp, {}))); + update1.Fold(std::move(update2)); + MOZ_RELEASE_ASSERT(IsSameUpdate( + update1, + Update(c4->BufferBytes(), c2->BufferBytes() + c3->BufferBytes(), + c2->ChunkHeader().mDoneTimeStamp, + {{c2->ChunkHeader().mDoneTimeStamp, c2->BufferBytes()}, + {c3->ChunkHeader().mDoneTimeStamp, c3->BufferBytes()}}))); + + // Pretend c2 has been recycled to make unreleased c5, and c4 has been + // released. + auto recycled = std::exchange(released, released->ReleaseNext()); + recycled->MarkRecycled(); + Unused << recycled->ReserveInitialBlockAsTail(0); + recycled->MarkDone(); + released->SetLast(std::move(unreleased)); + unreleased = std::move(recycled); + ProfileBufferChunk* c5 = c2; + c2 = nullptr; + update2 = + Update(c5->BufferBytes(), c3->BufferBytes() + c4->BufferBytes(), c3, c4); + MOZ_RELEASE_ASSERT(IsSameUpdate( + update2, + Update(c5->BufferBytes(), c3->BufferBytes() + c4->BufferBytes(), + c3->ChunkHeader().mDoneTimeStamp, + {{c4->ChunkHeader().mDoneTimeStamp, c4->BufferBytes()}}))); + update1.Fold(std::move(update2)); + MOZ_RELEASE_ASSERT(IsSameUpdate( + update1, + Update(c5->BufferBytes(), c3->BufferBytes() + c4->BufferBytes(), + c3->ChunkHeader().mDoneTimeStamp, + {{c3->ChunkHeader().mDoneTimeStamp, c3->BufferBytes()}, + {c4->ChunkHeader().mDoneTimeStamp, c4->BufferBytes()}}))); + + // And send a final update. + update1.Fold(Update(nullptr)); + MOZ_RELEASE_ASSERT(update1.IsFinal()); + MOZ_RELEASE_ASSERT(!update1.IsNotUpdate()); + + printf("TestControlledChunkManagerUpdate done\n"); +} + +static void TestControlledChunkManagerWithLocalLimit() { + printf("TestControlledChunkManagerWithLocalLimit...\n"); + + // Construct a ProfileBufferChunkManagerWithLocalLimit with chunk of minimum + // size >=100, up to 1000 bytes. + constexpr ProfileBufferChunk::Length MaxTotalBytes = 1000; + constexpr ProfileBufferChunk::Length ChunkMinBufferBytes = 100; + ProfileBufferChunkManagerWithLocalLimit cmll{MaxTotalBytes, + ChunkMinBufferBytes}; + + // Reference to chunk manager base class. + ProfileBufferChunkManager& cm = cmll; + + // Reference to controlled chunk manager base class. + ProfileBufferControlledChunkManager& ccm = cmll; + +# ifdef DEBUG + const char* chunkManagerRegisterer = + "TestControlledChunkManagerWithLocalLimit"; + cm.RegisteredWith(chunkManagerRegisterer); +# endif // DEBUG + + MOZ_RELEASE_ASSERT(cm.MaxTotalSize() == MaxTotalBytes, + "Max total size should be exactly as given"); + + unsigned destroyedChunks = 0; + unsigned destroyedBytes = 0; + cm.SetChunkDestroyedCallback([&](const ProfileBufferChunk& aChunks) { + for (const ProfileBufferChunk* chunk = &aChunks; chunk; + chunk = chunk->GetNext()) { + destroyedChunks += 1; + destroyedBytes += chunk->BufferBytes(); + } + }); + + using Update = ProfileBufferControlledChunkManager::Update; + unsigned updateCount = 0; + ProfileBufferControlledChunkManager::Update update; + MOZ_RELEASE_ASSERT(update.IsNotUpdate()); + auto updateCallback = [&](Update&& aUpdate) { + ++updateCount; + update.Fold(std::move(aUpdate)); + }; + ccm.SetUpdateCallback(updateCallback); + MOZ_RELEASE_ASSERT(updateCount == 1, + "SetUpdateCallback should have triggered an update"); + MOZ_RELEASE_ASSERT(IsSameUpdate(update, Update(0, 0, TimeStamp{}, {}))); + updateCount = 0; + update.Clear(); + + UniquePtr<ProfileBufferChunk> extantReleasedChunks = + cm.GetExtantReleasedChunks(); + MOZ_RELEASE_ASSERT(!extantReleasedChunks, "Unexpected released chunk(s)"); + MOZ_RELEASE_ASSERT(updateCount == 1, + "GetExtantReleasedChunks should have triggered an update"); + MOZ_RELEASE_ASSERT(IsSameUpdate(update, Update(0, 0, TimeStamp{}, {}))); + updateCount = 0; + update.Clear(); + + // First request. + UniquePtr<ProfileBufferChunk> chunk = cm.GetChunk(); + MOZ_RELEASE_ASSERT(!!chunk, + "First chunk immediate request should always work"); + const auto chunkActualBufferBytes = chunk->BufferBytes(); + MOZ_RELEASE_ASSERT(updateCount == 1, + "GetChunk should have triggered an update"); + MOZ_RELEASE_ASSERT( + IsSameUpdate(update, Update(chunk->BufferBytes(), 0, TimeStamp{}, {}))); + updateCount = 0; + update.Clear(); + + extantReleasedChunks = cm.GetExtantReleasedChunks(); + MOZ_RELEASE_ASSERT(!extantReleasedChunks, "Unexpected released chunk(s)"); + MOZ_RELEASE_ASSERT(updateCount == 1, + "GetExtantReleasedChunks should have triggered an update"); + MOZ_RELEASE_ASSERT( + IsSameUpdate(update, Update(chunk->BufferBytes(), 0, TimeStamp{}, {}))); + updateCount = 0; + update.Clear(); + + // For this test, we need to be able to get at least 2 chunks without hitting + // the limit. (If this failed, it wouldn't necessary be a problem with + // ProfileBufferChunkManagerWithLocalLimit, fiddle with constants at the top + // of this test.) + MOZ_RELEASE_ASSERT(chunkActualBufferBytes < 2 * MaxTotalBytes); + + ProfileBufferChunk::Length previousUnreleasedBytes = chunk->BufferBytes(); + ProfileBufferChunk::Length previousReleasedBytes = 0; + TimeStamp previousOldestDoneTimeStamp; + + // We will do enough loops to go through the maximum size a number of times. + const unsigned Rollovers = 3; + const unsigned Loops = Rollovers * MaxTotalBytes / chunkActualBufferBytes; + for (unsigned i = 0; i < Loops; ++i) { + // Add some data to the chunk. + const ProfileBufferIndex index = + ProfileBufferIndex(chunkActualBufferBytes) * i + 1; + chunk->SetRangeStart(index); + Unused << chunk->ReserveInitialBlockAsTail(1); + Unused << chunk->ReserveBlock(2); + + // Request a new chunk. + UniquePtr<ProfileBufferChunk> newChunk; + cm.RequestChunk([&](UniquePtr<ProfileBufferChunk> aChunk) { + newChunk = std::move(aChunk); + }); + MOZ_RELEASE_ASSERT(updateCount == 0, + "RequestChunk() shouldn't have triggered an update"); + cm.FulfillChunkRequests(); + MOZ_RELEASE_ASSERT(!!newChunk, "Chunk request should always work"); + MOZ_RELEASE_ASSERT(newChunk->BufferBytes() == chunkActualBufferBytes, + "Unexpected chunk size"); + MOZ_RELEASE_ASSERT(!newChunk->GetNext(), "There should only be one chunk"); + + MOZ_RELEASE_ASSERT(updateCount == 1, + "FulfillChunkRequests() after a request should have " + "triggered an update"); + MOZ_RELEASE_ASSERT(!update.IsFinal()); + MOZ_RELEASE_ASSERT(!update.IsNotUpdate()); + MOZ_RELEASE_ASSERT(update.UnreleasedBytes() == + previousUnreleasedBytes + newChunk->BufferBytes()); + previousUnreleasedBytes = update.UnreleasedBytes(); + MOZ_RELEASE_ASSERT(update.ReleasedBytes() <= previousReleasedBytes); + previousReleasedBytes = update.ReleasedBytes(); + MOZ_RELEASE_ASSERT(previousOldestDoneTimeStamp.IsNull() || + update.OldestDoneTimeStamp() >= + previousOldestDoneTimeStamp); + previousOldestDoneTimeStamp = update.OldestDoneTimeStamp(); + MOZ_RELEASE_ASSERT(update.NewlyReleasedChunksRef().empty()); + updateCount = 0; + update.Clear(); + + // Make sure the "Done" timestamp below cannot be the same as from the + // previous loop. + const TimeStamp now = TimeStamp::Now(); + while (TimeStamp::Now() == now) { + ::SleepMilli(1); + } + + // Mark previous chunk done and release it. + WaitUntilTimeStampChanges(); // Force "done" timestamp to change. + chunk->MarkDone(); + const auto doneTimeStamp = chunk->ChunkHeader().mDoneTimeStamp; + const auto bufferBytes = chunk->BufferBytes(); + cm.ReleaseChunk(std::move(chunk)); + + MOZ_RELEASE_ASSERT(updateCount == 1, + "ReleaseChunk() should have triggered an update"); + MOZ_RELEASE_ASSERT(!update.IsFinal()); + MOZ_RELEASE_ASSERT(!update.IsNotUpdate()); + MOZ_RELEASE_ASSERT(update.UnreleasedBytes() == + previousUnreleasedBytes - bufferBytes); + previousUnreleasedBytes = update.UnreleasedBytes(); + MOZ_RELEASE_ASSERT(update.ReleasedBytes() == + previousReleasedBytes + bufferBytes); + previousReleasedBytes = update.ReleasedBytes(); + MOZ_RELEASE_ASSERT(previousOldestDoneTimeStamp.IsNull() || + update.OldestDoneTimeStamp() >= + previousOldestDoneTimeStamp); + previousOldestDoneTimeStamp = update.OldestDoneTimeStamp(); + MOZ_RELEASE_ASSERT(update.OldestDoneTimeStamp() <= doneTimeStamp); + MOZ_RELEASE_ASSERT(update.NewlyReleasedChunksRef().size() == 1); + MOZ_RELEASE_ASSERT(update.NewlyReleasedChunksRef()[0].mDoneTimeStamp == + doneTimeStamp); + MOZ_RELEASE_ASSERT(update.NewlyReleasedChunksRef()[0].mBufferBytes == + bufferBytes); + updateCount = 0; + update.Clear(); + + // And cycle to the new chunk. + chunk = std::move(newChunk); + } + + // Enough testing! Clean-up. + Unused << chunk->ReserveInitialBlockAsTail(0); + chunk->MarkDone(); + cm.ForgetUnreleasedChunks(); + MOZ_RELEASE_ASSERT( + updateCount == 1, + "ForgetUnreleasedChunks() should have triggered an update"); + MOZ_RELEASE_ASSERT(!update.IsFinal()); + MOZ_RELEASE_ASSERT(!update.IsNotUpdate()); + MOZ_RELEASE_ASSERT(update.UnreleasedBytes() == 0); + MOZ_RELEASE_ASSERT(update.ReleasedBytes() == previousReleasedBytes); + MOZ_RELEASE_ASSERT(update.NewlyReleasedChunksRef().empty() == 1); + updateCount = 0; + update.Clear(); + + ccm.SetUpdateCallback({}); + MOZ_RELEASE_ASSERT(updateCount == 1, + "SetUpdateCallback({}) should have triggered an update"); + MOZ_RELEASE_ASSERT(update.IsFinal()); + +# ifdef DEBUG + cm.DeregisteredFrom(chunkManagerRegisterer); +# endif // DEBUG + + printf("TestControlledChunkManagerWithLocalLimit done\n"); +} + +# define VERIFY_PCB_START_END_PUSHED_CLEARED_FAILED( \ + aProfileChunkedBuffer, aStart, aEnd, aPushed, aCleared, aFailed) \ + { \ + ProfileChunkedBuffer::State state = (aProfileChunkedBuffer).GetState(); \ + MOZ_RELEASE_ASSERT(state.mRangeStart == (aStart)); \ + MOZ_RELEASE_ASSERT(state.mRangeEnd == (aEnd)); \ + MOZ_RELEASE_ASSERT(state.mPushedBlockCount == (aPushed)); \ + MOZ_RELEASE_ASSERT(state.mClearedBlockCount == (aCleared)); \ + MOZ_RELEASE_ASSERT(state.mFailedPutBytes == (aFailed)); \ + } + +static void TestChunkedBuffer() { + printf("TestChunkedBuffer...\n"); + + ProfileBufferBlockIndex blockIndex; + MOZ_RELEASE_ASSERT(!blockIndex); + MOZ_RELEASE_ASSERT(blockIndex == nullptr); + + // Create an out-of-session ProfileChunkedBuffer. + ProfileChunkedBuffer cb(ProfileChunkedBuffer::ThreadSafety::WithMutex); + + MOZ_RELEASE_ASSERT(cb.BufferLength().isNothing()); + + VERIFY_PCB_START_END_PUSHED_CLEARED_FAILED(cb, 1, 1, 0, 0, 0); + + int result = 0; + result = cb.ReserveAndPut( + []() { + MOZ_RELEASE_ASSERT(false); + return 1; + }, + [](Maybe<ProfileBufferEntryWriter>& aEW) { return aEW ? 2 : 3; }); + MOZ_RELEASE_ASSERT(result == 3); + VERIFY_PCB_START_END_PUSHED_CLEARED_FAILED(cb, 1, 1, 0, 0, 0); + + result = 0; + result = cb.Put( + 1, [](Maybe<ProfileBufferEntryWriter>& aEW) { return aEW ? 1 : 2; }); + MOZ_RELEASE_ASSERT(result == 2); + VERIFY_PCB_START_END_PUSHED_CLEARED_FAILED(cb, 1, 1, 0, 0, 0); + + blockIndex = cb.PutFrom(&result, 1); + MOZ_RELEASE_ASSERT(!blockIndex); + VERIFY_PCB_START_END_PUSHED_CLEARED_FAILED(cb, 1, 1, 0, 0, 0); + + blockIndex = cb.PutObjects(123, result, "hello"); + MOZ_RELEASE_ASSERT(!blockIndex); + VERIFY_PCB_START_END_PUSHED_CLEARED_FAILED(cb, 1, 1, 0, 0, 0); + + blockIndex = cb.PutObject(123); + MOZ_RELEASE_ASSERT(!blockIndex); + VERIFY_PCB_START_END_PUSHED_CLEARED_FAILED(cb, 1, 1, 0, 0, 0); + + auto chunks = cb.GetAllChunks(); + static_assert(std::is_same_v<decltype(chunks), UniquePtr<ProfileBufferChunk>>, + "ProfileChunkedBuffer::GetAllChunks() should return a " + "UniquePtr<ProfileBufferChunk>"); + MOZ_RELEASE_ASSERT(!chunks, "Expected no chunks when out-of-session"); + + bool ran = false; + result = 0; + result = cb.Read([&](ProfileChunkedBuffer::Reader* aReader) { + ran = true; + MOZ_RELEASE_ASSERT(!aReader); + return 3; + }); + MOZ_RELEASE_ASSERT(ran); + MOZ_RELEASE_ASSERT(result == 3); + + cb.ReadEach([](ProfileBufferEntryReader&) { MOZ_RELEASE_ASSERT(false); }); + + result = 0; + result = cb.ReadAt(nullptr, [](Maybe<ProfileBufferEntryReader>&& er) { + MOZ_RELEASE_ASSERT(er.isNothing()); + return 4; + }); + MOZ_RELEASE_ASSERT(result == 4); + + // Use ProfileBufferChunkManagerWithLocalLimit, which will give away + // ProfileBufferChunks that can contain 128 bytes, using up to 1KB of memory + // (including usable 128 bytes and headers). + constexpr size_t bufferMaxSize = 1024; + constexpr ProfileChunkedBuffer::Length chunkMinSize = 128; + ProfileBufferChunkManagerWithLocalLimit cm(bufferMaxSize, chunkMinSize); + cb.SetChunkManager(cm); + VERIFY_PCB_START_END_PUSHED_CLEARED_FAILED(cb, 1, 1, 0, 0, 0); + + // Let the chunk manager fulfill the initial request for an extra chunk. + cm.FulfillChunkRequests(); + + MOZ_RELEASE_ASSERT(cm.MaxTotalSize() == bufferMaxSize); + MOZ_RELEASE_ASSERT(cb.BufferLength().isSome()); + MOZ_RELEASE_ASSERT(*cb.BufferLength() == bufferMaxSize); + VERIFY_PCB_START_END_PUSHED_CLEARED_FAILED(cb, 1, 1, 0, 0, 0); + + // Write an int with the main `ReserveAndPut` function. + const int test = 123; + ran = false; + blockIndex = nullptr; + bool success = cb.ReserveAndPut( + []() { return sizeof(test); }, + [&](Maybe<ProfileBufferEntryWriter>& aEW) { + ran = true; + if (!aEW) { + return false; + } + blockIndex = aEW->CurrentBlockIndex(); + MOZ_RELEASE_ASSERT(aEW->RemainingBytes() == sizeof(test)); + aEW->WriteObject(test); + MOZ_RELEASE_ASSERT(aEW->RemainingBytes() == 0); + return true; + }); + MOZ_RELEASE_ASSERT(ran); + MOZ_RELEASE_ASSERT(success); + MOZ_RELEASE_ASSERT(blockIndex.ConvertToProfileBufferIndex() == 1); + VERIFY_PCB_START_END_PUSHED_CLEARED_FAILED( + cb, 1, 1 + ULEB128Size(sizeof(test)) + sizeof(test), 1, 0, 0); + + ran = false; + result = 0; + result = cb.Read([&](ProfileChunkedBuffer::Reader* aReader) { + ran = true; + MOZ_RELEASE_ASSERT(!!aReader); + // begin() and end() should be at the range edges (verified above). + MOZ_RELEASE_ASSERT( + aReader->begin().CurrentBlockIndex().ConvertToProfileBufferIndex() == + 1); + MOZ_RELEASE_ASSERT( + aReader->end().CurrentBlockIndex().ConvertToProfileBufferIndex() == 0); + // Null ProfileBufferBlockIndex clamped to the beginning. + MOZ_RELEASE_ASSERT(aReader->At(nullptr) == aReader->begin()); + MOZ_RELEASE_ASSERT(aReader->At(blockIndex) == aReader->begin()); + // At(begin) same as begin(). + MOZ_RELEASE_ASSERT(aReader->At(aReader->begin().CurrentBlockIndex()) == + aReader->begin()); + // At(past block) same as end(). + MOZ_RELEASE_ASSERT( + aReader->At(ProfileBufferBlockIndex::CreateFromProfileBufferIndex( + 1 + 1 + sizeof(test))) == aReader->end()); + + size_t read = 0; + aReader->ForEach([&](ProfileBufferEntryReader& er) { + ++read; + MOZ_RELEASE_ASSERT(er.RemainingBytes() == sizeof(test)); + const auto value = er.ReadObject<decltype(test)>(); + MOZ_RELEASE_ASSERT(value == test); + MOZ_RELEASE_ASSERT(er.RemainingBytes() == 0); + }); + MOZ_RELEASE_ASSERT(read == 1); + + read = 0; + for (auto er : *aReader) { + static_assert(std::is_same_v<decltype(er), ProfileBufferEntryReader>, + "ProfileChunkedBuffer::Reader range-for should produce " + "ProfileBufferEntryReader objects"); + ++read; + MOZ_RELEASE_ASSERT(er.RemainingBytes() == sizeof(test)); + const auto value = er.ReadObject<decltype(test)>(); + MOZ_RELEASE_ASSERT(value == test); + MOZ_RELEASE_ASSERT(er.RemainingBytes() == 0); + }; + MOZ_RELEASE_ASSERT(read == 1); + return 5; + }); + MOZ_RELEASE_ASSERT(ran); + MOZ_RELEASE_ASSERT(result == 5); + + // Read the int directly from the ProfileChunkedBuffer, without block index. + size_t read = 0; + cb.ReadEach([&](ProfileBufferEntryReader& er) { + ++read; + MOZ_RELEASE_ASSERT(er.RemainingBytes() == sizeof(test)); + const auto value = er.ReadObject<decltype(test)>(); + MOZ_RELEASE_ASSERT(value == test); + MOZ_RELEASE_ASSERT(er.RemainingBytes() == 0); + }); + MOZ_RELEASE_ASSERT(read == 1); + + // Read the int directly from the ProfileChunkedBuffer, with block index. + read = 0; + blockIndex = nullptr; + cb.ReadEach( + [&](ProfileBufferEntryReader& er, ProfileBufferBlockIndex aBlockIndex) { + ++read; + MOZ_RELEASE_ASSERT(!!aBlockIndex); + MOZ_RELEASE_ASSERT(!blockIndex); + blockIndex = aBlockIndex; + MOZ_RELEASE_ASSERT(er.RemainingBytes() == sizeof(test)); + const auto value = er.ReadObject<decltype(test)>(); + MOZ_RELEASE_ASSERT(value == test); + MOZ_RELEASE_ASSERT(er.RemainingBytes() == 0); + }); + MOZ_RELEASE_ASSERT(read == 1); + MOZ_RELEASE_ASSERT(!!blockIndex); + MOZ_RELEASE_ASSERT(blockIndex != nullptr); + + // Read the int from its block index. + read = 0; + result = 0; + result = cb.ReadAt(blockIndex, [&](Maybe<ProfileBufferEntryReader>&& er) { + ++read; + MOZ_RELEASE_ASSERT(er.isSome()); + MOZ_RELEASE_ASSERT(er->CurrentBlockIndex() == blockIndex); + MOZ_RELEASE_ASSERT(!er->NextBlockIndex()); + MOZ_RELEASE_ASSERT(er->RemainingBytes() == sizeof(test)); + const auto value = er->ReadObject<decltype(test)>(); + MOZ_RELEASE_ASSERT(value == test); + MOZ_RELEASE_ASSERT(er->RemainingBytes() == 0); + return 6; + }); + MOZ_RELEASE_ASSERT(result == 6); + MOZ_RELEASE_ASSERT(read == 1); + + MOZ_RELEASE_ASSERT(!cb.IsIndexInCurrentChunk(ProfileBufferIndex{})); + MOZ_RELEASE_ASSERT( + cb.IsIndexInCurrentChunk(blockIndex.ConvertToProfileBufferIndex())); + MOZ_RELEASE_ASSERT(cb.IsIndexInCurrentChunk(cb.GetState().mRangeEnd - 1)); + MOZ_RELEASE_ASSERT(!cb.IsIndexInCurrentChunk(cb.GetState().mRangeEnd)); + + // No changes after reads. + VERIFY_PCB_START_END_PUSHED_CLEARED_FAILED( + cb, 1, 1 + ULEB128Size(sizeof(test)) + sizeof(test), 1, 0, 0); + + // Steal the underlying ProfileBufferChunks from the ProfileChunkedBuffer. + chunks = cb.GetAllChunks(); + MOZ_RELEASE_ASSERT(!!chunks, "Expected at least one chunk"); + MOZ_RELEASE_ASSERT(!!chunks->GetNext(), "Expected two chunks"); + MOZ_RELEASE_ASSERT(!chunks->GetNext()->GetNext(), "Expected only two chunks"); + const ProfileChunkedBuffer::Length chunkActualSize = chunks->BufferBytes(); + MOZ_RELEASE_ASSERT(chunkActualSize >= chunkMinSize); + MOZ_RELEASE_ASSERT(chunks->RangeStart() == 1); + MOZ_RELEASE_ASSERT(chunks->OffsetFirstBlock() == 0); + MOZ_RELEASE_ASSERT(chunks->OffsetPastLastBlock() == 1 + sizeof(test)); + + // GetAllChunks() should have advanced the index one full chunk forward. + VERIFY_PCB_START_END_PUSHED_CLEARED_FAILED(cb, 1 + chunkActualSize, + 1 + chunkActualSize, 1, 0, 0); + + // Nothing more to read from the now-empty ProfileChunkedBuffer. + cb.ReadEach([](ProfileBufferEntryReader&) { MOZ_RELEASE_ASSERT(false); }); + cb.ReadEach([](ProfileBufferEntryReader&, ProfileBufferBlockIndex) { + MOZ_RELEASE_ASSERT(false); + }); + result = 0; + result = cb.ReadAt(nullptr, [](Maybe<ProfileBufferEntryReader>&& er) { + MOZ_RELEASE_ASSERT(er.isNothing()); + return 7; + }); + MOZ_RELEASE_ASSERT(result == 7); + + // Read the int from the stolen chunks. + read = 0; + ProfileChunkedBuffer::ReadEach( + chunks.get(), nullptr, + [&](ProfileBufferEntryReader& er, ProfileBufferBlockIndex aBlockIndex) { + ++read; + MOZ_RELEASE_ASSERT(aBlockIndex == blockIndex); + MOZ_RELEASE_ASSERT(er.RemainingBytes() == sizeof(test)); + const auto value = er.ReadObject<decltype(test)>(); + MOZ_RELEASE_ASSERT(value == test); + MOZ_RELEASE_ASSERT(er.RemainingBytes() == 0); + }); + MOZ_RELEASE_ASSERT(read == 1); + + // No changes after reads. + VERIFY_PCB_START_END_PUSHED_CLEARED_FAILED(cb, 1 + chunkActualSize, + 1 + chunkActualSize, 1, 0, 0); + + // Write lots of numbers (by memcpy), which should trigger Chunk destructions. + ProfileBufferBlockIndex firstBlockIndex; + MOZ_RELEASE_ASSERT(!firstBlockIndex); + ProfileBufferBlockIndex lastBlockIndex; + MOZ_RELEASE_ASSERT(!lastBlockIndex); + const size_t lots = 2 * bufferMaxSize / (1 + sizeof(int)); + for (size_t i = 1; i < lots; ++i) { + ProfileBufferBlockIndex blockIndex = cb.PutFrom(&i, sizeof(i)); + MOZ_RELEASE_ASSERT(!!blockIndex); + MOZ_RELEASE_ASSERT(blockIndex > firstBlockIndex); + if (!firstBlockIndex) { + firstBlockIndex = blockIndex; + } + MOZ_RELEASE_ASSERT(blockIndex > lastBlockIndex); + lastBlockIndex = blockIndex; + } + + ProfileChunkedBuffer::State stateAfterPuts = cb.GetState(); + ProfileBufferIndex startAfterPuts = stateAfterPuts.mRangeStart; + MOZ_RELEASE_ASSERT(startAfterPuts > 1 + chunkActualSize); + ProfileBufferIndex endAfterPuts = stateAfterPuts.mRangeEnd; + MOZ_RELEASE_ASSERT(endAfterPuts > startAfterPuts); + uint64_t pushedAfterPuts = stateAfterPuts.mPushedBlockCount; + MOZ_RELEASE_ASSERT(pushedAfterPuts > 0); + uint64_t clearedAfterPuts = stateAfterPuts.mClearedBlockCount; + MOZ_RELEASE_ASSERT(clearedAfterPuts > 0); + MOZ_RELEASE_ASSERT(stateAfterPuts.mFailedPutBytes == 0); + MOZ_RELEASE_ASSERT(!cb.IsIndexInCurrentChunk(ProfileBufferIndex{})); + MOZ_RELEASE_ASSERT( + !cb.IsIndexInCurrentChunk(blockIndex.ConvertToProfileBufferIndex())); + MOZ_RELEASE_ASSERT( + !cb.IsIndexInCurrentChunk(firstBlockIndex.ConvertToProfileBufferIndex())); + + // Read extant numbers, which should at least follow each other. + read = 0; + size_t i = 0; + cb.ReadEach( + [&](ProfileBufferEntryReader& er, ProfileBufferBlockIndex aBlockIndex) { + ++read; + MOZ_RELEASE_ASSERT(!!aBlockIndex); + MOZ_RELEASE_ASSERT(aBlockIndex > firstBlockIndex); + MOZ_RELEASE_ASSERT(aBlockIndex <= lastBlockIndex); + MOZ_RELEASE_ASSERT(er.RemainingBytes() == sizeof(size_t)); + const auto value = er.ReadObject<size_t>(); + if (i == 0) { + i = value; + } else { + MOZ_RELEASE_ASSERT(value == ++i); + } + MOZ_RELEASE_ASSERT(er.RemainingBytes() == 0); + }); + MOZ_RELEASE_ASSERT(read != 0); + MOZ_RELEASE_ASSERT(read < lots); + + // Read first extant number. + read = 0; + i = 0; + blockIndex = nullptr; + success = + cb.ReadAt(firstBlockIndex, [&](Maybe<ProfileBufferEntryReader>&& er) { + MOZ_ASSERT(er.isSome()); + ++read; + MOZ_RELEASE_ASSERT(er->CurrentBlockIndex() > firstBlockIndex); + MOZ_RELEASE_ASSERT(!!er->NextBlockIndex()); + MOZ_RELEASE_ASSERT(er->NextBlockIndex() > firstBlockIndex); + MOZ_RELEASE_ASSERT(er->NextBlockIndex() < lastBlockIndex); + blockIndex = er->NextBlockIndex(); + MOZ_RELEASE_ASSERT(er->RemainingBytes() == sizeof(size_t)); + const auto value = er->ReadObject<size_t>(); + MOZ_RELEASE_ASSERT(i == 0); + i = value; + MOZ_RELEASE_ASSERT(er->RemainingBytes() == 0); + return 7; + }); + MOZ_RELEASE_ASSERT(success); + MOZ_RELEASE_ASSERT(read == 1); + // Read other extant numbers one by one. + do { + bool success = + cb.ReadAt(blockIndex, [&](Maybe<ProfileBufferEntryReader>&& er) { + MOZ_ASSERT(er.isSome()); + ++read; + MOZ_RELEASE_ASSERT(er->CurrentBlockIndex() == blockIndex); + MOZ_RELEASE_ASSERT(!er->NextBlockIndex() || + er->NextBlockIndex() > blockIndex); + MOZ_RELEASE_ASSERT(!er->NextBlockIndex() || + er->NextBlockIndex() > firstBlockIndex); + MOZ_RELEASE_ASSERT(!er->NextBlockIndex() || + er->NextBlockIndex() <= lastBlockIndex); + MOZ_RELEASE_ASSERT(er->NextBlockIndex() + ? blockIndex < lastBlockIndex + : blockIndex == lastBlockIndex, + "er->NextBlockIndex() should only be null when " + "blockIndex is at the last block"); + blockIndex = er->NextBlockIndex(); + MOZ_RELEASE_ASSERT(er->RemainingBytes() == sizeof(size_t)); + const auto value = er->ReadObject<size_t>(); + MOZ_RELEASE_ASSERT(value == ++i); + MOZ_RELEASE_ASSERT(er->RemainingBytes() == 0); + return true; + }); + MOZ_RELEASE_ASSERT(success); + } while (blockIndex); + MOZ_RELEASE_ASSERT(read > 1); + + // No changes after reads. + VERIFY_PCB_START_END_PUSHED_CLEARED_FAILED( + cb, startAfterPuts, endAfterPuts, pushedAfterPuts, clearedAfterPuts, 0); + +# ifdef DEBUG + // cb.Dump(); +# endif + + cb.Clear(); + +# ifdef DEBUG + // cb.Dump(); +# endif + + ProfileChunkedBuffer::State stateAfterClear = cb.GetState(); + ProfileBufferIndex startAfterClear = stateAfterClear.mRangeStart; + MOZ_RELEASE_ASSERT(startAfterClear > startAfterPuts); + ProfileBufferIndex endAfterClear = stateAfterClear.mRangeEnd; + MOZ_RELEASE_ASSERT(endAfterClear == startAfterClear); + MOZ_RELEASE_ASSERT(stateAfterClear.mPushedBlockCount == 0); + MOZ_RELEASE_ASSERT(stateAfterClear.mClearedBlockCount == 0); + MOZ_RELEASE_ASSERT(stateAfterClear.mFailedPutBytes == 0); + MOZ_RELEASE_ASSERT(!cb.IsIndexInCurrentChunk(ProfileBufferIndex{})); + MOZ_RELEASE_ASSERT( + !cb.IsIndexInCurrentChunk(blockIndex.ConvertToProfileBufferIndex())); + MOZ_RELEASE_ASSERT(!cb.IsIndexInCurrentChunk(stateAfterClear.mRangeEnd - 1)); + MOZ_RELEASE_ASSERT(!cb.IsIndexInCurrentChunk(stateAfterClear.mRangeEnd)); + + // Start writer threads. + constexpr int ThreadCount = 32; + std::thread threads[ThreadCount]; + for (int threadNo = 0; threadNo < ThreadCount; ++threadNo) { + threads[threadNo] = std::thread( + [&](int aThreadNo) { + ::SleepMilli(1); + constexpr int pushCount = 1024; + for (int push = 0; push < pushCount; ++push) { + // Reserve as many bytes as the thread number (but at least enough + // to store an int), and write an increasing int. + const bool success = + cb.Put(std::max(aThreadNo, int(sizeof(push))), + [&](Maybe<ProfileBufferEntryWriter>& aEW) { + if (!aEW) { + return false; + } + aEW->WriteObject(aThreadNo * 1000000 + push); + // Advance writer to the end. + for (size_t r = aEW->RemainingBytes(); r != 0; --r) { + aEW->WriteObject<char>('_'); + } + return true; + }); + MOZ_RELEASE_ASSERT(success); + } + }, + threadNo); + } + + // Wait for all writer threads to die. + for (auto&& thread : threads) { + thread.join(); + } + +# ifdef DEBUG + // cb.Dump(); +# endif + + ProfileChunkedBuffer::State stateAfterMTPuts = cb.GetState(); + ProfileBufferIndex startAfterMTPuts = stateAfterMTPuts.mRangeStart; + MOZ_RELEASE_ASSERT(startAfterMTPuts > startAfterClear); + ProfileBufferIndex endAfterMTPuts = stateAfterMTPuts.mRangeEnd; + MOZ_RELEASE_ASSERT(endAfterMTPuts > startAfterMTPuts); + MOZ_RELEASE_ASSERT(stateAfterMTPuts.mPushedBlockCount > 0); + MOZ_RELEASE_ASSERT(stateAfterMTPuts.mClearedBlockCount > 0); + MOZ_RELEASE_ASSERT(stateAfterMTPuts.mFailedPutBytes == 0); + + // Reset to out-of-session. + cb.ResetChunkManager(); + + ProfileChunkedBuffer::State stateAfterReset = cb.GetState(); + ProfileBufferIndex startAfterReset = stateAfterReset.mRangeStart; + MOZ_RELEASE_ASSERT(startAfterReset == endAfterMTPuts); + ProfileBufferIndex endAfterReset = stateAfterReset.mRangeEnd; + MOZ_RELEASE_ASSERT(endAfterReset == startAfterReset); + MOZ_RELEASE_ASSERT(stateAfterReset.mPushedBlockCount == 0); + MOZ_RELEASE_ASSERT(stateAfterReset.mClearedBlockCount == 0); + MOZ_RELEASE_ASSERT(stateAfterReset.mFailedPutBytes == 0); + + success = cb.ReserveAndPut( + []() { + MOZ_RELEASE_ASSERT(false); + return 1; + }, + [](Maybe<ProfileBufferEntryWriter>& aEW) { return !!aEW; }); + MOZ_RELEASE_ASSERT(!success); + VERIFY_PCB_START_END_PUSHED_CLEARED_FAILED(cb, startAfterReset, endAfterReset, + 0, 0, 0); + + success = + cb.Put(1, [](Maybe<ProfileBufferEntryWriter>& aEW) { return !!aEW; }); + MOZ_RELEASE_ASSERT(!success); + VERIFY_PCB_START_END_PUSHED_CLEARED_FAILED(cb, startAfterReset, endAfterReset, + 0, 0, 0); + + blockIndex = cb.PutFrom(&success, 1); + MOZ_RELEASE_ASSERT(!blockIndex); + VERIFY_PCB_START_END_PUSHED_CLEARED_FAILED(cb, startAfterReset, endAfterReset, + 0, 0, 0); + + blockIndex = cb.PutObjects(123, success, "hello"); + MOZ_RELEASE_ASSERT(!blockIndex); + VERIFY_PCB_START_END_PUSHED_CLEARED_FAILED(cb, startAfterReset, endAfterReset, + 0, 0, 0); + + blockIndex = cb.PutObject(123); + MOZ_RELEASE_ASSERT(!blockIndex); + VERIFY_PCB_START_END_PUSHED_CLEARED_FAILED(cb, startAfterReset, endAfterReset, + 0, 0, 0); + + chunks = cb.GetAllChunks(); + MOZ_RELEASE_ASSERT(!chunks, "Expected no chunks when out-of-session"); + VERIFY_PCB_START_END_PUSHED_CLEARED_FAILED(cb, startAfterReset, endAfterReset, + 0, 0, 0); + + cb.ReadEach([](ProfileBufferEntryReader&) { MOZ_RELEASE_ASSERT(false); }); + VERIFY_PCB_START_END_PUSHED_CLEARED_FAILED(cb, startAfterReset, endAfterReset, + 0, 0, 0); + + success = cb.ReadAt(nullptr, [](Maybe<ProfileBufferEntryReader>&& er) { + MOZ_RELEASE_ASSERT(er.isNothing()); + return true; + }); + MOZ_RELEASE_ASSERT(success); + VERIFY_PCB_START_END_PUSHED_CLEARED_FAILED(cb, startAfterReset, endAfterReset, + 0, 0, 0); + + printf("TestChunkedBuffer done\n"); +} + +static void TestChunkedBufferSingle() { + printf("TestChunkedBufferSingle...\n"); + + constexpr ProfileChunkedBuffer::Length chunkMinSize = 128; + + // Create a ProfileChunkedBuffer that will own&use a + // ProfileBufferChunkManagerSingle, which will give away one + // ProfileBufferChunk that can contain 128 bytes. + ProfileChunkedBuffer cbSingle( + ProfileChunkedBuffer::ThreadSafety::WithoutMutex, + MakeUnique<ProfileBufferChunkManagerSingle>(chunkMinSize)); + + MOZ_RELEASE_ASSERT(cbSingle.BufferLength().isSome()); + const ProfileChunkedBuffer::Length bufferBytes = *cbSingle.BufferLength(); + MOZ_RELEASE_ASSERT(bufferBytes >= chunkMinSize); + + VERIFY_PCB_START_END_PUSHED_CLEARED_FAILED(cbSingle, 1, 1, 0, 0, 0); + + // We will write this many blocks to fill the chunk. + constexpr size_t testBlocks = 4; + const ProfileChunkedBuffer::Length blockBytes = bufferBytes / testBlocks; + MOZ_RELEASE_ASSERT(ULEB128Size(blockBytes) == 1, + "This test assumes block sizes are small enough so that " + "their ULEB128-encoded size is 1 byte"); + const ProfileChunkedBuffer::Length entryBytes = + blockBytes - ULEB128Size(blockBytes); + + // First buffer-filling test: Try to write a too-big entry at the end of the + // chunk. + + // Write all but one block. + for (size_t i = 0; i < testBlocks - 1; ++i) { + cbSingle.Put(entryBytes, [&](Maybe<ProfileBufferEntryWriter>& aEW) { + MOZ_RELEASE_ASSERT(aEW.isSome()); + while (aEW->RemainingBytes() > 0) { + **aEW = '0' + i; + ++(*aEW); + } + }); + VERIFY_PCB_START_END_PUSHED_CLEARED_FAILED( + cbSingle, 1, 1 + blockBytes * (i + 1), i + 1, 0, 0); + } + + // Write the last block so that it's too big (by 1 byte) to fit in the chunk, + // this should fail. + const ProfileChunkedBuffer::Length remainingBytesForLastBlock = + bufferBytes - blockBytes * (testBlocks - 1); + MOZ_RELEASE_ASSERT(ULEB128Size(remainingBytesForLastBlock) == 1, + "This test assumes block sizes are small enough so that " + "their ULEB128-encoded size is 1 byte"); + const ProfileChunkedBuffer::Length entryToFitRemainingBytes = + remainingBytesForLastBlock - ULEB128Size(remainingBytesForLastBlock); + cbSingle.Put(entryToFitRemainingBytes + 1, + [&](Maybe<ProfileBufferEntryWriter>& aEW) { + MOZ_RELEASE_ASSERT(aEW.isNothing()); + }); + // The buffer state should not have changed, apart from the failed bytes. + VERIFY_PCB_START_END_PUSHED_CLEARED_FAILED( + cbSingle, 1, 1 + blockBytes * (testBlocks - 1), testBlocks - 1, 0, + remainingBytesForLastBlock + 1); + + size_t read = 0; + cbSingle.ReadEach([&](ProfileBufferEntryReader& aER) { + MOZ_RELEASE_ASSERT(aER.RemainingBytes() == entryBytes); + while (aER.RemainingBytes() > 0) { + MOZ_RELEASE_ASSERT(*aER == '0' + read); + ++aER; + } + ++read; + }); + MOZ_RELEASE_ASSERT(read == testBlocks - 1); + + // ~Interlude~ Test AppendContent: + // Create another ProfileChunkedBuffer that will use a + // ProfileBufferChunkManagerWithLocalLimit, which will give away + // ProfileBufferChunks that can contain 128 bytes, using up to 1KB of memory + // (including usable 128 bytes and headers). + constexpr size_t bufferMaxSize = 1024; + ProfileBufferChunkManagerWithLocalLimit cmTarget(bufferMaxSize, chunkMinSize); + ProfileChunkedBuffer cbTarget(ProfileChunkedBuffer::ThreadSafety::WithMutex, + cmTarget); + + // It should start empty. + cbTarget.ReadEach( + [](ProfileBufferEntryReader&) { MOZ_RELEASE_ASSERT(false); }); + VERIFY_PCB_START_END_PUSHED_CLEARED_FAILED(cbTarget, 1, 1, 0, 0, 0); + + // Copy the contents from cbSingle to cbTarget. + cbTarget.AppendContents(cbSingle); + + // And verify that we now have the same contents in cbTarget. + read = 0; + cbTarget.ReadEach([&](ProfileBufferEntryReader& aER) { + MOZ_RELEASE_ASSERT(aER.RemainingBytes() == entryBytes); + while (aER.RemainingBytes() > 0) { + MOZ_RELEASE_ASSERT(*aER == '0' + read); + ++aER; + } + ++read; + }); + MOZ_RELEASE_ASSERT(read == testBlocks - 1); + // The state should be the same as the source. + VERIFY_PCB_START_END_PUSHED_CLEARED_FAILED( + cbTarget, 1, 1 + blockBytes * (testBlocks - 1), testBlocks - 1, 0, 0); + +# ifdef DEBUG + // cbSingle.Dump(); + // cbTarget.Dump(); +# endif + + // Because we failed to write a too-big chunk above, the chunk was marked + // full, so that entries should be consistently rejected from now on. + cbSingle.Put(1, [&](Maybe<ProfileBufferEntryWriter>& aEW) { + MOZ_RELEASE_ASSERT(aEW.isNothing()); + }); + VERIFY_PCB_START_END_PUSHED_CLEARED_FAILED( + cbSingle, 1, 1 + blockBytes * ((testBlocks - 1)), testBlocks - 1, 0, + remainingBytesForLastBlock + 1 + ULEB128Size(1u) + 1); + + // Clear the buffer before the next test. + + cbSingle.Clear(); + // Clear() should move the index to the next chunk range -- even if it's + // really reusing the same chunk. + VERIFY_PCB_START_END_PUSHED_CLEARED_FAILED(cbSingle, 1 + bufferBytes, + 1 + bufferBytes, 0, 0, 0); + cbSingle.ReadEach( + [&](ProfileBufferEntryReader& aER) { MOZ_RELEASE_ASSERT(false); }); + + // Second buffer-filling test: Try to write a final entry that just fits at + // the end of the chunk. + + // Write all but one block. + for (size_t i = 0; i < testBlocks - 1; ++i) { + cbSingle.Put(entryBytes, [&](Maybe<ProfileBufferEntryWriter>& aEW) { + MOZ_RELEASE_ASSERT(aEW.isSome()); + while (aEW->RemainingBytes() > 0) { + **aEW = 'a' + i; + ++(*aEW); + } + }); + VERIFY_PCB_START_END_PUSHED_CLEARED_FAILED( + cbSingle, 1 + bufferBytes, 1 + bufferBytes + blockBytes * (i + 1), + i + 1, 0, 0); + } + + read = 0; + cbSingle.ReadEach([&](ProfileBufferEntryReader& aER) { + MOZ_RELEASE_ASSERT(aER.RemainingBytes() == entryBytes); + while (aER.RemainingBytes() > 0) { + MOZ_RELEASE_ASSERT(*aER == 'a' + read); + ++aER; + } + ++read; + }); + MOZ_RELEASE_ASSERT(read == testBlocks - 1); + + // Write the last block so that it fits exactly in the chunk. + cbSingle.Put(entryToFitRemainingBytes, + [&](Maybe<ProfileBufferEntryWriter>& aEW) { + MOZ_RELEASE_ASSERT(aEW.isSome()); + while (aEW->RemainingBytes() > 0) { + **aEW = 'a' + (testBlocks - 1); + ++(*aEW); + } + }); + VERIFY_PCB_START_END_PUSHED_CLEARED_FAILED( + cbSingle, 1 + bufferBytes, 1 + bufferBytes + blockBytes * testBlocks, + testBlocks, 0, 0); + + read = 0; + cbSingle.ReadEach([&](ProfileBufferEntryReader& aER) { + MOZ_RELEASE_ASSERT( + aER.RemainingBytes() == + ((read < testBlocks) ? entryBytes : entryToFitRemainingBytes)); + while (aER.RemainingBytes() > 0) { + MOZ_RELEASE_ASSERT(*aER == 'a' + read); + ++aER; + } + ++read; + }); + MOZ_RELEASE_ASSERT(read == testBlocks); + + // Because the single chunk has been filled, it shouldn't be possible to write + // more entries. + cbSingle.Put(1, [&](Maybe<ProfileBufferEntryWriter>& aEW) { + MOZ_RELEASE_ASSERT(aEW.isNothing()); + }); + VERIFY_PCB_START_END_PUSHED_CLEARED_FAILED( + cbSingle, 1 + bufferBytes, 1 + bufferBytes + blockBytes * testBlocks, + testBlocks, 0, ULEB128Size(1u) + 1); + + cbSingle.Clear(); + // Clear() should move the index to the next chunk range -- even if it's + // really reusing the same chunk. + VERIFY_PCB_START_END_PUSHED_CLEARED_FAILED(cbSingle, 1 + bufferBytes * 2, + 1 + bufferBytes * 2, 0, 0, 0); + cbSingle.ReadEach( + [&](ProfileBufferEntryReader& aER) { MOZ_RELEASE_ASSERT(false); }); + + // Clear() recycles the released chunk, so we should be able to record new + // entries. + cbSingle.Put(entryBytes, [&](Maybe<ProfileBufferEntryWriter>& aEW) { + MOZ_RELEASE_ASSERT(aEW.isSome()); + while (aEW->RemainingBytes() > 0) { + **aEW = 'x'; + ++(*aEW); + } + }); + VERIFY_PCB_START_END_PUSHED_CLEARED_FAILED( + cbSingle, 1 + bufferBytes * 2, + 1 + bufferBytes * 2 + ULEB128Size(entryBytes) + entryBytes, 1, 0, 0); + read = 0; + cbSingle.ReadEach([&](ProfileBufferEntryReader& aER) { + MOZ_RELEASE_ASSERT(read == 0); + MOZ_RELEASE_ASSERT(aER.RemainingBytes() == entryBytes); + while (aER.RemainingBytes() > 0) { + MOZ_RELEASE_ASSERT(*aER == 'x'); + ++aER; + } + ++read; + }); + MOZ_RELEASE_ASSERT(read == 1); + + printf("TestChunkedBufferSingle done\n"); +} + +static void TestModuloBuffer(ModuloBuffer<>& mb, uint32_t MBSize) { + using MB = ModuloBuffer<>; + + MOZ_RELEASE_ASSERT(mb.BufferLength().Value() == MBSize); + + // Iterator comparisons. + MOZ_RELEASE_ASSERT(mb.ReaderAt(2) == mb.ReaderAt(2)); + MOZ_RELEASE_ASSERT(mb.ReaderAt(2) != mb.ReaderAt(3)); + MOZ_RELEASE_ASSERT(mb.ReaderAt(2) < mb.ReaderAt(3)); + MOZ_RELEASE_ASSERT(mb.ReaderAt(2) <= mb.ReaderAt(2)); + MOZ_RELEASE_ASSERT(mb.ReaderAt(2) <= mb.ReaderAt(3)); + MOZ_RELEASE_ASSERT(mb.ReaderAt(3) > mb.ReaderAt(2)); + MOZ_RELEASE_ASSERT(mb.ReaderAt(2) >= mb.ReaderAt(2)); + MOZ_RELEASE_ASSERT(mb.ReaderAt(3) >= mb.ReaderAt(2)); + + // Iterators indices don't wrap around (even though they may be pointing at + // the same location). + MOZ_RELEASE_ASSERT(mb.ReaderAt(2) != mb.ReaderAt(MBSize + 2)); + MOZ_RELEASE_ASSERT(mb.ReaderAt(MBSize + 2) != mb.ReaderAt(2)); + + // Dereference. + static_assert(std::is_same<decltype(*mb.ReaderAt(0)), const MB::Byte&>::value, + "Dereferencing from a reader should return const Byte*"); + static_assert(std::is_same<decltype(*mb.WriterAt(0)), MB::Byte&>::value, + "Dereferencing from a writer should return Byte*"); + // Contiguous between 0 and MBSize-1. + MOZ_RELEASE_ASSERT(&*mb.ReaderAt(MBSize - 1) == + &*mb.ReaderAt(0) + (MBSize - 1)); + // Wraps around. + MOZ_RELEASE_ASSERT(&*mb.ReaderAt(MBSize) == &*mb.ReaderAt(0)); + MOZ_RELEASE_ASSERT(&*mb.ReaderAt(MBSize + MBSize - 1) == + &*mb.ReaderAt(MBSize - 1)); + MOZ_RELEASE_ASSERT(&*mb.ReaderAt(MBSize + MBSize) == &*mb.ReaderAt(0)); + // Power of 2 modulo wrapping. + MOZ_RELEASE_ASSERT(&*mb.ReaderAt(uint32_t(-1)) == &*mb.ReaderAt(MBSize - 1)); + MOZ_RELEASE_ASSERT(&*mb.ReaderAt(static_cast<MB::Index>(-1)) == + &*mb.ReaderAt(MBSize - 1)); + + // Arithmetic. + MB::Reader arit = mb.ReaderAt(0); + MOZ_RELEASE_ASSERT(++arit == mb.ReaderAt(1)); + MOZ_RELEASE_ASSERT(arit == mb.ReaderAt(1)); + + MOZ_RELEASE_ASSERT(--arit == mb.ReaderAt(0)); + MOZ_RELEASE_ASSERT(arit == mb.ReaderAt(0)); + + MOZ_RELEASE_ASSERT(arit++ == mb.ReaderAt(0)); + MOZ_RELEASE_ASSERT(arit == mb.ReaderAt(1)); + + MOZ_RELEASE_ASSERT(arit-- == mb.ReaderAt(1)); + MOZ_RELEASE_ASSERT(arit == mb.ReaderAt(0)); + + MOZ_RELEASE_ASSERT(arit + 3 == mb.ReaderAt(3)); + MOZ_RELEASE_ASSERT(arit == mb.ReaderAt(0)); + + MOZ_RELEASE_ASSERT(4 + arit == mb.ReaderAt(4)); + MOZ_RELEASE_ASSERT(arit == mb.ReaderAt(0)); + + // (Can't have assignments inside asserts, hence the split.) + const bool checkPlusEq = ((arit += 3) == mb.ReaderAt(3)); + MOZ_RELEASE_ASSERT(checkPlusEq); + MOZ_RELEASE_ASSERT(arit == mb.ReaderAt(3)); + + MOZ_RELEASE_ASSERT((arit - 2) == mb.ReaderAt(1)); + MOZ_RELEASE_ASSERT(arit == mb.ReaderAt(3)); + + const bool checkMinusEq = ((arit -= 2) == mb.ReaderAt(1)); + MOZ_RELEASE_ASSERT(checkMinusEq); + MOZ_RELEASE_ASSERT(arit == mb.ReaderAt(1)); + + // Random access. + MOZ_RELEASE_ASSERT(&arit[3] == &*(arit + 3)); + MOZ_RELEASE_ASSERT(arit == mb.ReaderAt(1)); + + // Iterator difference. + MOZ_RELEASE_ASSERT(mb.ReaderAt(3) - mb.ReaderAt(1) == 2); + MOZ_RELEASE_ASSERT(mb.ReaderAt(1) - mb.ReaderAt(3) == MB::Index(-2)); + + // Only testing Writer, as Reader is just a subset with no code differences. + MB::Writer it = mb.WriterAt(0); + MOZ_RELEASE_ASSERT(it.CurrentIndex() == 0); + + // Write two characters at the start. + it.WriteObject('x'); + it.WriteObject('y'); + + // Backtrack to read them. + it -= 2; + // PeekObject should read without moving. + MOZ_RELEASE_ASSERT(it.PeekObject<char>() == 'x'); + MOZ_RELEASE_ASSERT(it.CurrentIndex() == 0); + // ReadObject should read and move past the character. + MOZ_RELEASE_ASSERT(it.ReadObject<char>() == 'x'); + MOZ_RELEASE_ASSERT(it.CurrentIndex() == 1); + MOZ_RELEASE_ASSERT(it.PeekObject<char>() == 'y'); + MOZ_RELEASE_ASSERT(it.CurrentIndex() == 1); + MOZ_RELEASE_ASSERT(it.ReadObject<char>() == 'y'); + MOZ_RELEASE_ASSERT(it.CurrentIndex() == 2); + + // Checking that a reader can be created from a writer. + MB::Reader it2(it); + MOZ_RELEASE_ASSERT(it2.CurrentIndex() == 2); + // Or assigned. + it2 = it; + MOZ_RELEASE_ASSERT(it2.CurrentIndex() == 2); + + // Iterator traits. + static_assert(std::is_same<std::iterator_traits<MB::Reader>::difference_type, + MB::Index>::value, + "ModuloBuffer::Reader::difference_type should be Index"); + static_assert(std::is_same<std::iterator_traits<MB::Reader>::value_type, + MB::Byte>::value, + "ModuloBuffer::Reader::value_type should be Byte"); + static_assert(std::is_same<std::iterator_traits<MB::Reader>::pointer, + const MB::Byte*>::value, + "ModuloBuffer::Reader::pointer should be const Byte*"); + static_assert(std::is_same<std::iterator_traits<MB::Reader>::reference, + const MB::Byte&>::value, + "ModuloBuffer::Reader::reference should be const Byte&"); + static_assert(std::is_base_of< + std::input_iterator_tag, + std::iterator_traits<MB::Reader>::iterator_category>::value, + "ModuloBuffer::Reader::iterator_category should be derived " + "from input_iterator_tag"); + static_assert(std::is_base_of< + std::forward_iterator_tag, + std::iterator_traits<MB::Reader>::iterator_category>::value, + "ModuloBuffer::Reader::iterator_category should be derived " + "from forward_iterator_tag"); + static_assert(std::is_base_of< + std::bidirectional_iterator_tag, + std::iterator_traits<MB::Reader>::iterator_category>::value, + "ModuloBuffer::Reader::iterator_category should be derived " + "from bidirectional_iterator_tag"); + static_assert( + std::is_same<std::iterator_traits<MB::Reader>::iterator_category, + std::random_access_iterator_tag>::value, + "ModuloBuffer::Reader::iterator_category should be " + "random_access_iterator_tag"); + + // Use as input iterator by std::string constructor (which is only considered + // with proper input iterators.) + std::string s(mb.ReaderAt(0), mb.ReaderAt(2)); + MOZ_RELEASE_ASSERT(s == "xy"); + + // Write 4-byte number at index 2. + it.WriteObject(int32_t(123)); + MOZ_RELEASE_ASSERT(it.CurrentIndex() == 6); + // And another, which should now wrap around (but index continues on.) + it.WriteObject(int32_t(456)); + MOZ_RELEASE_ASSERT(it.CurrentIndex() == MBSize + 2); + // Even though index==MBSize+2, we can read the object we wrote at 2. + MOZ_RELEASE_ASSERT(it.ReadObject<int32_t>() == 123); + MOZ_RELEASE_ASSERT(it.CurrentIndex() == MBSize + 6); + // And similarly, index MBSize+6 points at the same location as index 6. + MOZ_RELEASE_ASSERT(it.ReadObject<int32_t>() == 456); + MOZ_RELEASE_ASSERT(it.CurrentIndex() == MBSize + MBSize + 2); +} + +void TestModuloBuffer() { + printf("TestModuloBuffer...\n"); + + // Testing ModuloBuffer with default template arguments. + using MB = ModuloBuffer<>; + + // Only 8-byte buffers, to easily test wrap-around. + constexpr uint32_t MBSize = 8; + + // MB with self-allocated heap buffer. + MB mbByLength(MakePowerOfTwo32<MBSize>()); + TestModuloBuffer(mbByLength, MBSize); + + // MB taking ownership of a provided UniquePtr to a buffer. + auto uniqueBuffer = MakeUnique<uint8_t[]>(MBSize); + MB mbByUniquePtr(MakeUnique<uint8_t[]>(MBSize), MakePowerOfTwo32<MBSize>()); + TestModuloBuffer(mbByUniquePtr, MBSize); + + // MB using part of a buffer on the stack. The buffer is three times the + // required size: The middle third is where ModuloBuffer will work, the first + // and last thirds are only used to later verify that ModuloBuffer didn't go + // out of its bounds. + uint8_t buffer[MBSize * 3]; + // Pre-fill the buffer with a known pattern, so we can later see what changed. + for (size_t i = 0; i < MBSize * 3; ++i) { + buffer[i] = uint8_t('A' + i); + } + MB mbByBuffer(&buffer[MBSize], MakePowerOfTwo32<MBSize>()); + TestModuloBuffer(mbByBuffer, MBSize); + + // Check that only the provided stack-based sub-buffer was modified. + uint32_t changed = 0; + for (size_t i = MBSize; i < MBSize * 2; ++i) { + changed += (buffer[i] == uint8_t('A' + i)) ? 0 : 1; + } + // Expect at least 75% changes. + MOZ_RELEASE_ASSERT(changed >= MBSize * 6 / 8); + + // Everything around the sub-buffer should be unchanged. + for (size_t i = 0; i < MBSize; ++i) { + MOZ_RELEASE_ASSERT(buffer[i] == uint8_t('A' + i)); + } + for (size_t i = MBSize * 2; i < MBSize * 3; ++i) { + MOZ_RELEASE_ASSERT(buffer[i] == uint8_t('A' + i)); + } + + // Check that move-construction is allowed. This verifies that we do not + // crash from a double free, when `mbByBuffer` and `mbByStolenBuffer` are both + // destroyed at the end of this function. + MB mbByStolenBuffer = std::move(mbByBuffer); + TestModuloBuffer(mbByStolenBuffer, MBSize); + + // Check that only the provided stack-based sub-buffer was modified. + changed = 0; + for (size_t i = MBSize; i < MBSize * 2; ++i) { + changed += (buffer[i] == uint8_t('A' + i)) ? 0 : 1; + } + // Expect at least 75% changes. + MOZ_RELEASE_ASSERT(changed >= MBSize * 6 / 8); + + // Everything around the sub-buffer should be unchanged. + for (size_t i = 0; i < MBSize; ++i) { + MOZ_RELEASE_ASSERT(buffer[i] == uint8_t('A' + i)); + } + for (size_t i = MBSize * 2; i < MBSize * 3; ++i) { + MOZ_RELEASE_ASSERT(buffer[i] == uint8_t('A' + i)); + } + + // This test function does a `ReadInto` as directed, and checks that the + // result is the same as if the copy had been done manually byte-by-byte. + // `TestReadInto(3, 7, 2)` copies from index 3 to index 7, 2 bytes long. + // Return the output string (from `ReadInto`) for external checks. + auto TestReadInto = [](MB::Index aReadFrom, MB::Index aWriteTo, + MB::Length aBytes) { + constexpr uint32_t TRISize = 16; + + // Prepare an input buffer, all different elements. + uint8_t input[TRISize + 1] = "ABCDEFGHIJKLMNOP"; + const MB mbInput(input, MakePowerOfTwo32<TRISize>()); + + // Prepare an output buffer, different from input. + uint8_t output[TRISize + 1] = "abcdefghijklmnop"; + MB mbOutput(output, MakePowerOfTwo32<TRISize>()); + + // Run ReadInto. + auto writer = mbOutput.WriterAt(aWriteTo); + mbInput.ReaderAt(aReadFrom).ReadInto(writer, aBytes); + + // Do the same operation manually. + uint8_t outputCheck[TRISize + 1] = "abcdefghijklmnop"; + MB mbOutputCheck(outputCheck, MakePowerOfTwo32<TRISize>()); + auto readerCheck = mbInput.ReaderAt(aReadFrom); + auto writerCheck = mbOutputCheck.WriterAt(aWriteTo); + for (MB::Length i = 0; i < aBytes; ++i) { + *writerCheck++ = *readerCheck++; + } + + // Compare the two outputs. + for (uint32_t i = 0; i < TRISize; ++i) { +# ifdef TEST_MODULOBUFFER_FAILURE_DEBUG + // Only used when debugging failures. + if (output[i] != outputCheck[i]) { + printf( + "*** from=%u to=%u bytes=%u i=%u\ninput: '%s'\noutput: " + "'%s'\ncheck: '%s'\n", + unsigned(aReadFrom), unsigned(aWriteTo), unsigned(aBytes), + unsigned(i), input, output, outputCheck); + } +# endif + MOZ_RELEASE_ASSERT(output[i] == outputCheck[i]); + } + +# ifdef TEST_MODULOBUFFER_HELPER + // Only used when adding more tests. + printf("*** from=%u to=%u bytes=%u output: %s\n", unsigned(aReadFrom), + unsigned(aWriteTo), unsigned(aBytes), output); +# endif + + return std::string(reinterpret_cast<const char*>(output)); + }; + + // A few manual checks: + constexpr uint32_t TRISize = 16; + MOZ_RELEASE_ASSERT(TestReadInto(0, 0, 0) == "abcdefghijklmnop"); + MOZ_RELEASE_ASSERT(TestReadInto(0, 0, TRISize) == "ABCDEFGHIJKLMNOP"); + MOZ_RELEASE_ASSERT(TestReadInto(0, 5, TRISize) == "LMNOPABCDEFGHIJK"); + MOZ_RELEASE_ASSERT(TestReadInto(5, 0, TRISize) == "FGHIJKLMNOPABCDE"); + + // Test everything! (16^3 = 4096, not too much.) + for (MB::Index r = 0; r < TRISize; ++r) { + for (MB::Index w = 0; w < TRISize; ++w) { + for (MB::Length len = 0; len < TRISize; ++len) { + TestReadInto(r, w, len); + } + } + } + + printf("TestModuloBuffer done\n"); +} + +void TestBlocksRingBufferAPI() { + printf("TestBlocksRingBufferAPI...\n"); + + // Create a 16-byte buffer, enough to store up to 3 entries (1 byte size + 4 + // bytes uint64_t). + constexpr uint32_t MBSize = 16; + uint8_t buffer[MBSize * 3]; + for (size_t i = 0; i < MBSize * 3; ++i) { + buffer[i] = uint8_t('A' + i); + } + + // Start a temporary block to constrain buffer lifetime. + { + BlocksRingBuffer rb(BlocksRingBuffer::ThreadSafety::WithMutex, + &buffer[MBSize], MakePowerOfTwo32<MBSize>()); + +# define VERIFY_START_END_PUSHED_CLEARED(aStart, aEnd, aPushed, aCleared) \ + { \ + BlocksRingBuffer::State state = rb.GetState(); \ + MOZ_RELEASE_ASSERT(state.mRangeStart.ConvertToProfileBufferIndex() == \ + (aStart)); \ + MOZ_RELEASE_ASSERT(state.mRangeEnd.ConvertToProfileBufferIndex() == \ + (aEnd)); \ + MOZ_RELEASE_ASSERT(state.mPushedBlockCount == (aPushed)); \ + MOZ_RELEASE_ASSERT(state.mClearedBlockCount == (aCleared)); \ + } + + // All entries will contain one 32-bit number. The resulting blocks will + // have the following structure: + // - 1 byte for the LEB128 size of 4 + // - 4 bytes for the number. + // E.g., if we have entries with `123` and `456`: + // .-- Index 0 reserved for empty ProfileBufferBlockIndex, nothing there. + // | .-- first readable block at index 1 + // | |.-- first block at index 1 + // | ||.-- 1 byte for the entry size, which is `4` (32 bits) + // | ||| .-- entry starts at index 2, contains 32-bit int + // | ||| | .-- entry and block finish *after* index 5 (so 6) + // | ||| | | .-- second block starts at index 6 + // | ||| | | | etc. + // | ||| | | | .-- End readable blocks: 11 + // v vvv v v V v + // 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 + // - S[4 | int(123) ] [4 | int(456) ]E + + // Empty buffer to start with. + // Start&end indices still at 1 (0 is reserved for the default + // ProfileBufferBlockIndex{} that cannot point at a valid entry), nothing + // cleared. + VERIFY_START_END_PUSHED_CLEARED(1, 1, 0, 0); + + // Default ProfileBufferBlockIndex. + ProfileBufferBlockIndex bi0; + if (bi0) { + MOZ_RELEASE_ASSERT(false, + "if (ProfileBufferBlockIndex{}) should fail test"); + } + if (!bi0) { + } else { + MOZ_RELEASE_ASSERT(false, + "if (!ProfileBufferBlockIndex{}) should succeed test"); + } + MOZ_RELEASE_ASSERT(!bi0); + MOZ_RELEASE_ASSERT(bi0 == bi0); + MOZ_RELEASE_ASSERT(bi0 <= bi0); + MOZ_RELEASE_ASSERT(bi0 >= bi0); + MOZ_RELEASE_ASSERT(!(bi0 != bi0)); + MOZ_RELEASE_ASSERT(!(bi0 < bi0)); + MOZ_RELEASE_ASSERT(!(bi0 > bi0)); + + // Default ProfileBufferBlockIndex can be used, but returns no valid entry. + rb.ReadAt(bi0, [](Maybe<ProfileBufferEntryReader>&& aMaybeReader) { + MOZ_RELEASE_ASSERT(aMaybeReader.isNothing()); + }); + + // Push `1` directly. + MOZ_RELEASE_ASSERT( + rb.PutObject(uint32_t(1)).ConvertToProfileBufferIndex() == 1); + // 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 + // - S[4 | int(1) ]E + VERIFY_START_END_PUSHED_CLEARED(1, 6, 1, 0); + + // Push `2` through ReserveAndPut, check output ProfileBufferBlockIndex. + auto bi2 = rb.ReserveAndPut([]() { return sizeof(uint32_t); }, + [](Maybe<ProfileBufferEntryWriter>& aEW) { + MOZ_RELEASE_ASSERT(aEW.isSome()); + aEW->WriteObject(uint32_t(2)); + return aEW->CurrentBlockIndex(); + }); + static_assert(std::is_same<decltype(bi2), ProfileBufferBlockIndex>::value, + "All index-returning functions should return a " + "ProfileBufferBlockIndex"); + MOZ_RELEASE_ASSERT(bi2.ConvertToProfileBufferIndex() == 6); + // 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 + // - S[4 | int(1) ] [4 | int(2) ]E + VERIFY_START_END_PUSHED_CLEARED(1, 11, 2, 0); + + // Check single entry at bi2, store next block index. + auto i2Next = + rb.ReadAt(bi2, [bi2](Maybe<ProfileBufferEntryReader>&& aMaybeReader) { + MOZ_RELEASE_ASSERT(aMaybeReader.isSome()); + MOZ_RELEASE_ASSERT(aMaybeReader->CurrentBlockIndex() == bi2); + MOZ_RELEASE_ASSERT(aMaybeReader->NextBlockIndex() == nullptr); + size_t entrySize = aMaybeReader->RemainingBytes(); + MOZ_RELEASE_ASSERT(aMaybeReader->ReadObject<uint32_t>() == 2); + // The next block index is after this block, which is made of the + // entry size (coded as ULEB128) followed by the entry itself. + return bi2.ConvertToProfileBufferIndex() + ULEB128Size(entrySize) + + entrySize; + }); + auto bi2Next = rb.GetState().mRangeEnd; + MOZ_RELEASE_ASSERT(bi2Next.ConvertToProfileBufferIndex() == i2Next); + // bi2Next is at the end, nothing to read. + rb.ReadAt(bi2Next, [](Maybe<ProfileBufferEntryReader>&& aMaybeReader) { + MOZ_RELEASE_ASSERT(aMaybeReader.isNothing()); + }); + + // ProfileBufferBlockIndex tests. + if (bi2) { + } else { + MOZ_RELEASE_ASSERT( + false, + "if (non-default-ProfileBufferBlockIndex) should succeed test"); + } + if (!bi2) { + MOZ_RELEASE_ASSERT( + false, "if (!non-default-ProfileBufferBlockIndex) should fail test"); + } + + MOZ_RELEASE_ASSERT(!!bi2); + MOZ_RELEASE_ASSERT(bi2 == bi2); + MOZ_RELEASE_ASSERT(bi2 <= bi2); + MOZ_RELEASE_ASSERT(bi2 >= bi2); + MOZ_RELEASE_ASSERT(!(bi2 != bi2)); + MOZ_RELEASE_ASSERT(!(bi2 < bi2)); + MOZ_RELEASE_ASSERT(!(bi2 > bi2)); + + MOZ_RELEASE_ASSERT(bi0 != bi2); + MOZ_RELEASE_ASSERT(bi0 < bi2); + MOZ_RELEASE_ASSERT(bi0 <= bi2); + MOZ_RELEASE_ASSERT(!(bi0 == bi2)); + MOZ_RELEASE_ASSERT(!(bi0 > bi2)); + MOZ_RELEASE_ASSERT(!(bi0 >= bi2)); + + MOZ_RELEASE_ASSERT(bi2 != bi0); + MOZ_RELEASE_ASSERT(bi2 > bi0); + MOZ_RELEASE_ASSERT(bi2 >= bi0); + MOZ_RELEASE_ASSERT(!(bi2 == bi0)); + MOZ_RELEASE_ASSERT(!(bi2 < bi0)); + MOZ_RELEASE_ASSERT(!(bi2 <= bi0)); + + MOZ_RELEASE_ASSERT(bi2 != bi2Next); + MOZ_RELEASE_ASSERT(bi2 < bi2Next); + MOZ_RELEASE_ASSERT(bi2 <= bi2Next); + MOZ_RELEASE_ASSERT(!(bi2 == bi2Next)); + MOZ_RELEASE_ASSERT(!(bi2 > bi2Next)); + MOZ_RELEASE_ASSERT(!(bi2 >= bi2Next)); + + MOZ_RELEASE_ASSERT(bi2Next != bi2); + MOZ_RELEASE_ASSERT(bi2Next > bi2); + MOZ_RELEASE_ASSERT(bi2Next >= bi2); + MOZ_RELEASE_ASSERT(!(bi2Next == bi2)); + MOZ_RELEASE_ASSERT(!(bi2Next < bi2)); + MOZ_RELEASE_ASSERT(!(bi2Next <= bi2)); + + // Push `3` through Put, check writer output + // is returned to the initial caller. + auto put3 = + rb.Put(sizeof(uint32_t), [&](Maybe<ProfileBufferEntryWriter>& aEW) { + MOZ_RELEASE_ASSERT(aEW.isSome()); + aEW->WriteObject(uint32_t(3)); + MOZ_RELEASE_ASSERT(aEW->CurrentBlockIndex() == bi2Next); + return float(aEW->CurrentBlockIndex().ConvertToProfileBufferIndex()); + }); + static_assert(std::is_same<decltype(put3), float>::value, + "Expect float as returned by callback."); + MOZ_RELEASE_ASSERT(put3 == 11.0); + // 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 (16) + // - S[4 | int(1) ] [4 | int(2) ] [4 | int(3) ]E + VERIFY_START_END_PUSHED_CLEARED(1, 16, 3, 0); + + // Re-Read single entry at bi2, it should now have a next entry. + rb.ReadAt(bi2, [&](Maybe<ProfileBufferEntryReader>&& aMaybeReader) { + MOZ_RELEASE_ASSERT(aMaybeReader.isSome()); + MOZ_RELEASE_ASSERT(aMaybeReader->CurrentBlockIndex() == bi2); + MOZ_RELEASE_ASSERT(aMaybeReader->ReadObject<uint32_t>() == 2); + MOZ_RELEASE_ASSERT(aMaybeReader->NextBlockIndex() == bi2Next); + }); + + // Check that we have `1` to `3`. + uint32_t count = 0; + rb.ReadEach([&](ProfileBufferEntryReader& aReader) { + MOZ_RELEASE_ASSERT(aReader.ReadObject<uint32_t>() == ++count); + }); + MOZ_RELEASE_ASSERT(count == 3); + + // Push `4`, store its ProfileBufferBlockIndex for later. + // This will wrap around, and clear the first entry. + ProfileBufferBlockIndex bi4 = rb.PutObject(uint32_t(4)); + // Before: + // 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 (16) + // - S[4 | int(1) ] [4 | int(2) ] [4 | int(3) ]E + // 1. First entry cleared: + // 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 (16) + // - ? ? ? ? ? S[4 | int(2) ] [4 | int(3) ]E + // 2. New entry starts at 15 and wraps around: (shown on separate line) + // 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 (16) + // - ? ? ? ? ? S[4 | int(2) ] [4 | int(3) ] + // 16 17 18 19 20 21 ... + // [4 | int(4) ]E + // (collapsed) + // 16 17 18 19 20 21 6 7 8 9 10 11 12 13 14 15 (16) + // [4 | int(4) ]E ? S[4 | int(2) ] [4 | int(3) ] + VERIFY_START_END_PUSHED_CLEARED(6, 21, 4, 1); + + // Check that we have `2` to `4`. + count = 1; + rb.ReadEach([&](ProfileBufferEntryReader& aReader) { + MOZ_RELEASE_ASSERT(aReader.ReadObject<uint32_t>() == ++count); + }); + MOZ_RELEASE_ASSERT(count == 4); + + // Push 5 through Put, no returns. + // This will clear the second entry. + // Check that the EntryWriter can access bi4 but not bi2. + auto bi5 = + rb.Put(sizeof(uint32_t), [&](Maybe<ProfileBufferEntryWriter>& aEW) { + MOZ_RELEASE_ASSERT(aEW.isSome()); + aEW->WriteObject(uint32_t(5)); + return aEW->CurrentBlockIndex(); + }); + auto bi6 = rb.GetState().mRangeEnd; + // 16 17 18 19 20 21 22 23 24 25 26 11 12 13 14 15 (16) + // [4 | int(4) ] [4 | int(5) ]E ? S[4 | int(3) ] + VERIFY_START_END_PUSHED_CLEARED(11, 26, 5, 2); + + // Read single entry at bi2, should now gracefully fail. + rb.ReadAt(bi2, [](Maybe<ProfileBufferEntryReader>&& aMaybeReader) { + MOZ_RELEASE_ASSERT(aMaybeReader.isNothing()); + }); + + // Read single entry at bi5. + rb.ReadAt(bi5, [](Maybe<ProfileBufferEntryReader>&& aMaybeReader) { + MOZ_RELEASE_ASSERT(aMaybeReader.isSome()); + MOZ_RELEASE_ASSERT(aMaybeReader->ReadObject<uint32_t>() == 5); + }); + + rb.Read([&](BlocksRingBuffer::Reader* aReader) { + MOZ_RELEASE_ASSERT(!!aReader); + // begin() and end() should be at the range edges (verified above). + MOZ_RELEASE_ASSERT( + aReader->begin().CurrentBlockIndex().ConvertToProfileBufferIndex() == + 11); + MOZ_RELEASE_ASSERT( + aReader->end().CurrentBlockIndex().ConvertToProfileBufferIndex() == + 26); + // Null ProfileBufferBlockIndex clamped to the beginning. + MOZ_RELEASE_ASSERT(aReader->At(bi0) == aReader->begin()); + // Cleared block index clamped to the beginning. + MOZ_RELEASE_ASSERT(aReader->At(bi2) == aReader->begin()); + // At(begin) same as begin(). + MOZ_RELEASE_ASSERT(aReader->At(aReader->begin().CurrentBlockIndex()) == + aReader->begin()); + // bi5 at expected position. + MOZ_RELEASE_ASSERT( + aReader->At(bi5).CurrentBlockIndex().ConvertToProfileBufferIndex() == + 21); + // bi6 at expected position at the end. + MOZ_RELEASE_ASSERT(aReader->At(bi6) == aReader->end()); + // At(end) same as end(). + MOZ_RELEASE_ASSERT(aReader->At(aReader->end().CurrentBlockIndex()) == + aReader->end()); + }); + + // Check that we have `3` to `5`. + count = 2; + rb.ReadEach([&](ProfileBufferEntryReader& aReader) { + MOZ_RELEASE_ASSERT(aReader.ReadObject<uint32_t>() == ++count); + }); + MOZ_RELEASE_ASSERT(count == 5); + + // Clear everything before `4`, this should clear `3`. + rb.ClearBefore(bi4); + // 16 17 18 19 20 21 22 23 24 25 26 11 12 13 14 15 + // S[4 | int(4) ] [4 | int(5) ]E ? ? ? ? ? ? + VERIFY_START_END_PUSHED_CLEARED(16, 26, 5, 3); + + // Check that we have `4` to `5`. + count = 3; + rb.ReadEach([&](ProfileBufferEntryReader& aReader) { + MOZ_RELEASE_ASSERT(aReader.ReadObject<uint32_t>() == ++count); + }); + MOZ_RELEASE_ASSERT(count == 5); + + // Clear everything before `4` again, nothing to clear. + rb.ClearBefore(bi4); + VERIFY_START_END_PUSHED_CLEARED(16, 26, 5, 3); + + // Clear everything, this should clear `4` and `5`, and bring the start + // index where the end index currently is. + rb.ClearBefore(bi6); + // 16 17 18 19 20 21 22 23 24 25 26 11 12 13 14 15 + // ? ? ? ? ? ? ? ? ? ? SE? ? ? ? ? ? + VERIFY_START_END_PUSHED_CLEARED(26, 26, 5, 5); + + // Check that we have nothing to read. + rb.ReadEach([&](auto&&) { MOZ_RELEASE_ASSERT(false); }); + + // Read single entry at bi5, should now gracefully fail. + rb.ReadAt(bi5, [](Maybe<ProfileBufferEntryReader>&& aMaybeReader) { + MOZ_RELEASE_ASSERT(aMaybeReader.isNothing()); + }); + + // Clear everything before now-cleared `4`, nothing to clear. + rb.ClearBefore(bi4); + VERIFY_START_END_PUSHED_CLEARED(26, 26, 5, 5); + + // Push `6` directly. + MOZ_RELEASE_ASSERT(rb.PutObject(uint32_t(6)) == bi6); + // 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 + // ? ? ? ? ? ? ? ? ? ? S[4 | int(6) ]E ? + VERIFY_START_END_PUSHED_CLEARED(26, 31, 6, 5); + + { + // Create a 2nd buffer and fill it with `7` and `8`. + uint8_t buffer2[MBSize]; + BlocksRingBuffer rb2(BlocksRingBuffer::ThreadSafety::WithoutMutex, + buffer2, MakePowerOfTwo32<MBSize>()); + rb2.PutObject(uint32_t(7)); + rb2.PutObject(uint32_t(8)); + // Main buffer shouldn't have changed. + VERIFY_START_END_PUSHED_CLEARED(26, 31, 6, 5); + + // Append contents of rb2 to rb, this should end up being the same as + // pushing the two numbers. + rb.AppendContents(rb2); + // 32 33 34 35 36 37 38 39 40 41 26 27 28 29 30 31 + // int(7) ] [4 | int(8) ]E ? S[4 | int(6) ] [4 | + VERIFY_START_END_PUSHED_CLEARED(26, 41, 8, 5); + + // Append contents of rb2 to rb again, to verify that rb2 was not modified + // above. This should clear `6` and the first `7`. + rb.AppendContents(rb2); + // 48 49 50 51 36 37 38 39 40 41 42 43 44 45 46 47 + // int(8) ]E ? S[4 | int(8) ] [4 | int(7) ] [4 | + VERIFY_START_END_PUSHED_CLEARED(36, 51, 10, 7); + + // End of block where rb2 lives, to verify that it is not needed anymore + // for its copied values to survive in rb. + } + VERIFY_START_END_PUSHED_CLEARED(36, 51, 10, 7); + + // bi6 should now have been cleared. + rb.ReadAt(bi6, [](Maybe<ProfileBufferEntryReader>&& aMaybeReader) { + MOZ_RELEASE_ASSERT(aMaybeReader.isNothing()); + }); + + // Check that we have `8`, `7`, `8`. + count = 0; + uint32_t expected[3] = {8, 7, 8}; + rb.ReadEach([&](ProfileBufferEntryReader& aReader) { + MOZ_RELEASE_ASSERT(count < 3); + MOZ_RELEASE_ASSERT(aReader.ReadObject<uint32_t>() == expected[count++]); + }); + MOZ_RELEASE_ASSERT(count == 3); + + // End of block where rb lives, BlocksRingBuffer destructor should call + // entry destructor for remaining entries. + } + + // Check that only the provided stack-based sub-buffer was modified. + uint32_t changed = 0; + for (size_t i = MBSize; i < MBSize * 2; ++i) { + changed += (buffer[i] == uint8_t('A' + i)) ? 0 : 1; + } + // Expect at least 75% changes. + MOZ_RELEASE_ASSERT(changed >= MBSize * 6 / 8); + + // Everything around the sub-buffer should be unchanged. + for (size_t i = 0; i < MBSize; ++i) { + MOZ_RELEASE_ASSERT(buffer[i] == uint8_t('A' + i)); + } + for (size_t i = MBSize * 2; i < MBSize * 3; ++i) { + MOZ_RELEASE_ASSERT(buffer[i] == uint8_t('A' + i)); + } + + printf("TestBlocksRingBufferAPI done\n"); +} + +void TestBlocksRingBufferUnderlyingBufferChanges() { + printf("TestBlocksRingBufferUnderlyingBufferChanges...\n"); + + // Out-of-session BlocksRingBuffer to start with. + BlocksRingBuffer rb(BlocksRingBuffer::ThreadSafety::WithMutex); + + // Block index to read at. Initially "null", but may be changed below. + ProfileBufferBlockIndex bi; + + // Test all rb APIs when rb is out-of-session and therefore doesn't have an + // underlying buffer. + auto testOutOfSession = [&]() { + MOZ_RELEASE_ASSERT(rb.BufferLength().isNothing()); + BlocksRingBuffer::State state = rb.GetState(); + // When out-of-session, range start and ends are the same, and there are no + // pushed&cleared blocks. + MOZ_RELEASE_ASSERT(state.mRangeStart == state.mRangeEnd); + MOZ_RELEASE_ASSERT(state.mPushedBlockCount == 0); + MOZ_RELEASE_ASSERT(state.mClearedBlockCount == 0); + // `Put()` functions run the callback with `Nothing`. + int32_t ran = 0; + rb.Put(1, [&](Maybe<ProfileBufferEntryWriter>& aMaybeEntryWriter) { + MOZ_RELEASE_ASSERT(aMaybeEntryWriter.isNothing()); + ++ran; + }); + MOZ_RELEASE_ASSERT(ran == 1); + // `PutFrom` won't do anything, and returns the null + // ProfileBufferBlockIndex. + MOZ_RELEASE_ASSERT(rb.PutFrom(&ran, sizeof(ran)) == + ProfileBufferBlockIndex{}); + MOZ_RELEASE_ASSERT(rb.PutObject(ran) == ProfileBufferBlockIndex{}); + // `Read()` functions run the callback with `Nothing`. + ran = 0; + rb.Read([&](BlocksRingBuffer::Reader* aReader) { + MOZ_RELEASE_ASSERT(!aReader); + ++ran; + }); + MOZ_RELEASE_ASSERT(ran == 1); + ran = 0; + rb.ReadAt(ProfileBufferBlockIndex{}, + [&](Maybe<ProfileBufferEntryReader>&& aMaybeEntryReader) { + MOZ_RELEASE_ASSERT(aMaybeEntryReader.isNothing()); + ++ran; + }); + MOZ_RELEASE_ASSERT(ran == 1); + ran = 0; + rb.ReadAt(bi, [&](Maybe<ProfileBufferEntryReader>&& aMaybeEntryReader) { + MOZ_RELEASE_ASSERT(aMaybeEntryReader.isNothing()); + ++ran; + }); + MOZ_RELEASE_ASSERT(ran == 1); + // `ReadEach` shouldn't run the callback (nothing to read). + rb.ReadEach([](auto&&) { MOZ_RELEASE_ASSERT(false); }); + }; + + // As `testOutOfSession()` attempts to modify the buffer, we run it twice to + // make sure one run doesn't influence the next one. + testOutOfSession(); + testOutOfSession(); + + rb.ClearBefore(bi); + testOutOfSession(); + testOutOfSession(); + + rb.Clear(); + testOutOfSession(); + testOutOfSession(); + + rb.Reset(); + testOutOfSession(); + testOutOfSession(); + + constexpr uint32_t MBSize = 32; + + rb.Set(MakePowerOfTwo<BlocksRingBuffer::Length, MBSize>()); + + constexpr bool EMPTY = true; + constexpr bool NOT_EMPTY = false; + // Test all rb APIs when rb has an underlying buffer. + auto testInSession = [&](bool aExpectEmpty) { + MOZ_RELEASE_ASSERT(rb.BufferLength().isSome()); + BlocksRingBuffer::State state = rb.GetState(); + if (aExpectEmpty) { + MOZ_RELEASE_ASSERT(state.mRangeStart == state.mRangeEnd); + MOZ_RELEASE_ASSERT(state.mPushedBlockCount == 0); + MOZ_RELEASE_ASSERT(state.mClearedBlockCount == 0); + } else { + MOZ_RELEASE_ASSERT(state.mRangeStart < state.mRangeEnd); + MOZ_RELEASE_ASSERT(state.mPushedBlockCount > 0); + MOZ_RELEASE_ASSERT(state.mClearedBlockCount <= state.mPushedBlockCount); + } + int32_t ran = 0; + // The following three `Put...` will write three int32_t of value 1. + bi = rb.Put(sizeof(ran), + [&](Maybe<ProfileBufferEntryWriter>& aMaybeEntryWriter) { + MOZ_RELEASE_ASSERT(aMaybeEntryWriter.isSome()); + ++ran; + aMaybeEntryWriter->WriteObject(ran); + return aMaybeEntryWriter->CurrentBlockIndex(); + }); + MOZ_RELEASE_ASSERT(ran == 1); + MOZ_RELEASE_ASSERT(rb.PutFrom(&ran, sizeof(ran)) != + ProfileBufferBlockIndex{}); + MOZ_RELEASE_ASSERT(rb.PutObject(ran) != ProfileBufferBlockIndex{}); + ran = 0; + rb.Read([&](BlocksRingBuffer::Reader* aReader) { + MOZ_RELEASE_ASSERT(!!aReader); + ++ran; + }); + MOZ_RELEASE_ASSERT(ran == 1); + ran = 0; + rb.ReadEach([&](ProfileBufferEntryReader& aEntryReader) { + MOZ_RELEASE_ASSERT(aEntryReader.RemainingBytes() == sizeof(ran)); + MOZ_RELEASE_ASSERT(aEntryReader.ReadObject<decltype(ran)>() == 1); + ++ran; + }); + MOZ_RELEASE_ASSERT(ran >= 3); + ran = 0; + rb.ReadAt(ProfileBufferBlockIndex{}, + [&](Maybe<ProfileBufferEntryReader>&& aMaybeEntryReader) { + MOZ_RELEASE_ASSERT(aMaybeEntryReader.isNothing()); + ++ran; + }); + MOZ_RELEASE_ASSERT(ran == 1); + ran = 0; + rb.ReadAt(bi, [&](Maybe<ProfileBufferEntryReader>&& aMaybeEntryReader) { + MOZ_RELEASE_ASSERT(aMaybeEntryReader.isNothing() == !bi); + ++ran; + }); + MOZ_RELEASE_ASSERT(ran == 1); + }; + + testInSession(EMPTY); + testInSession(NOT_EMPTY); + + rb.Set(MakePowerOfTwo<BlocksRingBuffer::Length, 32>()); + MOZ_RELEASE_ASSERT(rb.BufferLength().isSome()); + rb.ReadEach([](auto&&) { MOZ_RELEASE_ASSERT(false); }); + + testInSession(EMPTY); + testInSession(NOT_EMPTY); + + rb.Reset(); + testOutOfSession(); + testOutOfSession(); + + uint8_t buffer[MBSize * 3]; + for (size_t i = 0; i < MBSize * 3; ++i) { + buffer[i] = uint8_t('A' + i); + } + + rb.Set(&buffer[MBSize], MakePowerOfTwo<BlocksRingBuffer::Length, MBSize>()); + MOZ_RELEASE_ASSERT(rb.BufferLength().isSome()); + rb.ReadEach([](auto&&) { MOZ_RELEASE_ASSERT(false); }); + + testInSession(EMPTY); + testInSession(NOT_EMPTY); + + rb.Reset(); + testOutOfSession(); + testOutOfSession(); + + rb.Set(&buffer[MBSize], MakePowerOfTwo<BlocksRingBuffer::Length, MBSize>()); + MOZ_RELEASE_ASSERT(rb.BufferLength().isSome()); + rb.ReadEach([](auto&&) { MOZ_RELEASE_ASSERT(false); }); + + testInSession(EMPTY); + testInSession(NOT_EMPTY); + + // Remove the current underlying buffer, this should clear all entries. + rb.Reset(); + + // Check that only the provided stack-based sub-buffer was modified. + uint32_t changed = 0; + for (size_t i = MBSize; i < MBSize * 2; ++i) { + changed += (buffer[i] == uint8_t('A' + i)) ? 0 : 1; + } + // Expect at least 75% changes. + MOZ_RELEASE_ASSERT(changed >= MBSize * 6 / 8); + + // Everything around the sub-buffer should be unchanged. + for (size_t i = 0; i < MBSize; ++i) { + MOZ_RELEASE_ASSERT(buffer[i] == uint8_t('A' + i)); + } + for (size_t i = MBSize * 2; i < MBSize * 3; ++i) { + MOZ_RELEASE_ASSERT(buffer[i] == uint8_t('A' + i)); + } + + testOutOfSession(); + testOutOfSession(); + + printf("TestBlocksRingBufferUnderlyingBufferChanges done\n"); +} + +void TestBlocksRingBufferThreading() { + printf("TestBlocksRingBufferThreading...\n"); + + constexpr uint32_t MBSize = 8192; + uint8_t buffer[MBSize * 3]; + for (size_t i = 0; i < MBSize * 3; ++i) { + buffer[i] = uint8_t('A' + i); + } + BlocksRingBuffer rb(BlocksRingBuffer::ThreadSafety::WithMutex, + &buffer[MBSize], MakePowerOfTwo32<MBSize>()); + + // Start reader thread. + std::atomic<bool> stopReader{false}; + std::thread reader([&]() { + for (;;) { + BlocksRingBuffer::State state = rb.GetState(); + printf( + "Reader: range=%llu..%llu (%llu bytes) pushed=%llu cleared=%llu " + "(alive=%llu)\n", + static_cast<unsigned long long>( + state.mRangeStart.ConvertToProfileBufferIndex()), + static_cast<unsigned long long>( + state.mRangeEnd.ConvertToProfileBufferIndex()), + static_cast<unsigned long long>( + state.mRangeEnd.ConvertToProfileBufferIndex()) - + static_cast<unsigned long long>( + state.mRangeStart.ConvertToProfileBufferIndex()), + static_cast<unsigned long long>(state.mPushedBlockCount), + static_cast<unsigned long long>(state.mClearedBlockCount), + static_cast<unsigned long long>(state.mPushedBlockCount - + state.mClearedBlockCount)); + if (stopReader) { + break; + } + ::SleepMilli(1); + } + }); + + // Start writer threads. + constexpr int ThreadCount = 32; + std::thread threads[ThreadCount]; + for (int threadNo = 0; threadNo < ThreadCount; ++threadNo) { + threads[threadNo] = std::thread( + [&](int aThreadNo) { + ::SleepMilli(1); + constexpr int pushCount = 1024; + for (int push = 0; push < pushCount; ++push) { + // Reserve as many bytes as the thread number (but at least enough + // to store an int), and write an increasing int. + rb.Put(std::max(aThreadNo, int(sizeof(push))), + [&](Maybe<ProfileBufferEntryWriter>& aEW) { + MOZ_RELEASE_ASSERT(aEW.isSome()); + aEW->WriteObject(aThreadNo * 1000000 + push); + *aEW += aEW->RemainingBytes(); + }); + } + }, + threadNo); + } + + // Wait for all writer threads to die. + for (auto&& thread : threads) { + thread.join(); + } + + // Stop reader thread. + stopReader = true; + reader.join(); + + // Check that only the provided stack-based sub-buffer was modified. + uint32_t changed = 0; + for (size_t i = MBSize; i < MBSize * 2; ++i) { + changed += (buffer[i] == uint8_t('A' + i)) ? 0 : 1; + } + // Expect at least 75% changes. + MOZ_RELEASE_ASSERT(changed >= MBSize * 6 / 8); + + // Everything around the sub-buffer should be unchanged. + for (size_t i = 0; i < MBSize; ++i) { + MOZ_RELEASE_ASSERT(buffer[i] == uint8_t('A' + i)); + } + for (size_t i = MBSize * 2; i < MBSize * 3; ++i) { + MOZ_RELEASE_ASSERT(buffer[i] == uint8_t('A' + i)); + } + + printf("TestBlocksRingBufferThreading done\n"); +} + +void TestBlocksRingBufferSerialization() { + printf("TestBlocksRingBufferSerialization...\n"); + + constexpr uint32_t MBSize = 64; + uint8_t buffer[MBSize * 3]; + for (size_t i = 0; i < MBSize * 3; ++i) { + buffer[i] = uint8_t('A' + i); + } + BlocksRingBuffer rb(BlocksRingBuffer::ThreadSafety::WithMutex, + &buffer[MBSize], MakePowerOfTwo32<MBSize>()); + + // Will expect literal string to always have the same address. +# define THE_ANSWER "The answer is " + const char* theAnswer = THE_ANSWER; + + rb.PutObjects('0', WrapProfileBufferLiteralCStringPointer(THE_ANSWER), 42, + std::string(" but pi="), 3.14); + rb.ReadEach([&](ProfileBufferEntryReader& aER) { + char c0; + const char* answer; + int integer; + std::string str; + double pi; + aER.ReadIntoObjects(c0, answer, integer, str, pi); + MOZ_RELEASE_ASSERT(c0 == '0'); + MOZ_RELEASE_ASSERT(answer == theAnswer); + MOZ_RELEASE_ASSERT(integer == 42); + MOZ_RELEASE_ASSERT(str == " but pi="); + MOZ_RELEASE_ASSERT(pi == 3.14); + }); + rb.ReadEach([&](ProfileBufferEntryReader& aER) { + char c0 = aER.ReadObject<char>(); + MOZ_RELEASE_ASSERT(c0 == '0'); + const char* answer = aER.ReadObject<const char*>(); + MOZ_RELEASE_ASSERT(answer == theAnswer); + int integer = aER.ReadObject<int>(); + MOZ_RELEASE_ASSERT(integer == 42); + std::string str = aER.ReadObject<std::string>(); + MOZ_RELEASE_ASSERT(str == " but pi="); + double pi = aER.ReadObject<double>(); + MOZ_RELEASE_ASSERT(pi == 3.14); + }); + + rb.Clear(); + // Write an int and store its ProfileBufferBlockIndex. + ProfileBufferBlockIndex blockIndex = rb.PutObject(123); + // It should be non-0. + MOZ_RELEASE_ASSERT(blockIndex != ProfileBufferBlockIndex{}); + // Write that ProfileBufferBlockIndex. + rb.PutObject(blockIndex); + rb.Read([&](BlocksRingBuffer::Reader* aR) { + BlocksRingBuffer::BlockIterator it = aR->begin(); + const BlocksRingBuffer::BlockIterator itEnd = aR->end(); + MOZ_RELEASE_ASSERT(it != itEnd); + MOZ_RELEASE_ASSERT((*it).ReadObject<int>() == 123); + ++it; + MOZ_RELEASE_ASSERT(it != itEnd); + MOZ_RELEASE_ASSERT((*it).ReadObject<ProfileBufferBlockIndex>() == + blockIndex); + ++it; + MOZ_RELEASE_ASSERT(it == itEnd); + }); + + rb.Clear(); + rb.PutObjects( + std::make_tuple('0', WrapProfileBufferLiteralCStringPointer(THE_ANSWER), + 42, std::string(" but pi="), 3.14)); + rb.ReadEach([&](ProfileBufferEntryReader& aER) { + MOZ_RELEASE_ASSERT(aER.ReadObject<char>() == '0'); + MOZ_RELEASE_ASSERT(aER.ReadObject<const char*>() == theAnswer); + MOZ_RELEASE_ASSERT(aER.ReadObject<int>() == 42); + MOZ_RELEASE_ASSERT(aER.ReadObject<std::string>() == " but pi="); + MOZ_RELEASE_ASSERT(aER.ReadObject<double>() == 3.14); + }); + + rb.Clear(); + rb.PutObjects( + std::make_tuple('0', WrapProfileBufferLiteralCStringPointer(THE_ANSWER), + 42, std::string(" but pi="), 3.14)); + rb.ReadEach([&](ProfileBufferEntryReader& aER) { + MOZ_RELEASE_ASSERT(aER.ReadObject<char>() == '0'); + MOZ_RELEASE_ASSERT(aER.ReadObject<const char*>() == theAnswer); + MOZ_RELEASE_ASSERT(aER.ReadObject<int>() == 42); + MOZ_RELEASE_ASSERT(aER.ReadObject<std::string>() == " but pi="); + MOZ_RELEASE_ASSERT(aER.ReadObject<double>() == 3.14); + }); + + rb.Clear(); + { + UniqueFreePtr<char> ufps(strdup(THE_ANSWER)); + rb.PutObjects(ufps); + } + rb.ReadEach([&](ProfileBufferEntryReader& aER) { + auto ufps = aER.ReadObject<UniqueFreePtr<char>>(); + MOZ_RELEASE_ASSERT(!!ufps); + MOZ_RELEASE_ASSERT(std::string(THE_ANSWER) == ufps.get()); + }); + + rb.Clear(); + int intArray[] = {1, 2, 3, 4, 5}; + rb.PutObjects(Span(intArray)); + rb.ReadEach([&](ProfileBufferEntryReader& aER) { + int intArrayOut[sizeof(intArray) / sizeof(intArray[0])] = {0}; + auto outSpan = Span(intArrayOut); + aER.ReadIntoObject(outSpan); + for (size_t i = 0; i < sizeof(intArray) / sizeof(intArray[0]); ++i) { + MOZ_RELEASE_ASSERT(intArrayOut[i] == intArray[i]); + } + }); + + rb.Clear(); + rb.PutObjects(Maybe<int>(Nothing{}), Maybe<int>(Some(123))); + rb.ReadEach([&](ProfileBufferEntryReader& aER) { + Maybe<int> mi0, mi1; + aER.ReadIntoObjects(mi0, mi1); + MOZ_RELEASE_ASSERT(mi0.isNothing()); + MOZ_RELEASE_ASSERT(mi1.isSome()); + MOZ_RELEASE_ASSERT(*mi1 == 123); + }); + + rb.Clear(); + using V = Variant<int, double, int>; + V v0(VariantIndex<0>{}, 123); + V v1(3.14); + V v2(VariantIndex<2>{}, 456); + rb.PutObjects(v0, v1, v2); + rb.ReadEach([&](ProfileBufferEntryReader& aER) { + MOZ_RELEASE_ASSERT(aER.ReadObject<V>() == v0); + MOZ_RELEASE_ASSERT(aER.ReadObject<V>() == v1); + MOZ_RELEASE_ASSERT(aER.ReadObject<V>() == v2); + }); + + // 2nd BlocksRingBuffer to contain the 1st one. It has be be more than twice + // the size. + constexpr uint32_t MBSize2 = MBSize * 4; + uint8_t buffer2[MBSize2 * 3]; + for (size_t i = 0; i < MBSize2 * 3; ++i) { + buffer2[i] = uint8_t('B' + i); + } + BlocksRingBuffer rb2(BlocksRingBuffer::ThreadSafety::WithoutMutex, + &buffer2[MBSize2], MakePowerOfTwo32<MBSize2>()); + rb2.PutObject(rb); + + // 3rd BlocksRingBuffer deserialized from the 2nd one. + uint8_t buffer3[MBSize * 3]; + for (size_t i = 0; i < MBSize * 3; ++i) { + buffer3[i] = uint8_t('C' + i); + } + BlocksRingBuffer rb3(BlocksRingBuffer::ThreadSafety::WithoutMutex, + &buffer3[MBSize], MakePowerOfTwo32<MBSize>()); + rb2.ReadEach([&](ProfileBufferEntryReader& aER) { aER.ReadIntoObject(rb3); }); + + // And a 4th heap-allocated one. + UniquePtr<BlocksRingBuffer> rb4up; + rb2.ReadEach([&](ProfileBufferEntryReader& aER) { + rb4up = aER.ReadObject<UniquePtr<BlocksRingBuffer>>(); + }); + MOZ_RELEASE_ASSERT(!!rb4up); + + // Clear 1st and 2nd BlocksRingBuffers, to ensure we have made a deep copy + // into the 3rd&4th ones. + rb.Clear(); + rb2.Clear(); + + // And now the 3rd one should have the same contents as the 1st one had. + rb3.ReadEach([&](ProfileBufferEntryReader& aER) { + MOZ_RELEASE_ASSERT(aER.ReadObject<V>() == v0); + MOZ_RELEASE_ASSERT(aER.ReadObject<V>() == v1); + MOZ_RELEASE_ASSERT(aER.ReadObject<V>() == v2); + }); + + // And 4th. + rb4up->ReadEach([&](ProfileBufferEntryReader& aER) { + MOZ_RELEASE_ASSERT(aER.ReadObject<V>() == v0); + MOZ_RELEASE_ASSERT(aER.ReadObject<V>() == v1); + MOZ_RELEASE_ASSERT(aER.ReadObject<V>() == v2); + }); + + // In fact, the 3rd and 4th ones should have the same state, because they were + // created the same way. + MOZ_RELEASE_ASSERT(rb3.GetState().mRangeStart == + rb4up->GetState().mRangeStart); + MOZ_RELEASE_ASSERT(rb3.GetState().mRangeEnd == rb4up->GetState().mRangeEnd); + MOZ_RELEASE_ASSERT(rb3.GetState().mPushedBlockCount == + rb4up->GetState().mPushedBlockCount); + MOZ_RELEASE_ASSERT(rb3.GetState().mClearedBlockCount == + rb4up->GetState().mClearedBlockCount); + + // Check that only the provided stack-based sub-buffer was modified. + uint32_t changed = 0; + for (size_t i = MBSize; i < MBSize * 2; ++i) { + changed += (buffer[i] == uint8_t('A' + i)) ? 0 : 1; + } + // Expect at least 75% changes. + MOZ_RELEASE_ASSERT(changed >= MBSize * 6 / 8); + + // Everything around the sub-buffers should be unchanged. + for (size_t i = 0; i < MBSize; ++i) { + MOZ_RELEASE_ASSERT(buffer[i] == uint8_t('A' + i)); + } + for (size_t i = MBSize * 2; i < MBSize * 3; ++i) { + MOZ_RELEASE_ASSERT(buffer[i] == uint8_t('A' + i)); + } + + for (size_t i = 0; i < MBSize2; ++i) { + MOZ_RELEASE_ASSERT(buffer2[i] == uint8_t('B' + i)); + } + for (size_t i = MBSize2 * 2; i < MBSize2 * 3; ++i) { + MOZ_RELEASE_ASSERT(buffer2[i] == uint8_t('B' + i)); + } + + for (size_t i = 0; i < MBSize; ++i) { + MOZ_RELEASE_ASSERT(buffer3[i] == uint8_t('C' + i)); + } + for (size_t i = MBSize * 2; i < MBSize * 3; ++i) { + MOZ_RELEASE_ASSERT(buffer3[i] == uint8_t('C' + i)); + } + + printf("TestBlocksRingBufferSerialization done\n"); +} + +void TestLiteralEmptyStringView() { + printf("TestLiteralEmptyStringView...\n"); + + static_assert(mozilla::LiteralEmptyStringView<char>() == + std::string_view("")); + static_assert(!!mozilla::LiteralEmptyStringView<char>().data()); + static_assert(mozilla::LiteralEmptyStringView<char>().length() == 0); + + static_assert(mozilla::LiteralEmptyStringView<char16_t>() == + std::basic_string_view<char16_t>(u"")); + static_assert(!!mozilla::LiteralEmptyStringView<char16_t>().data()); + static_assert(mozilla::LiteralEmptyStringView<char16_t>().length() == 0); + + printf("TestLiteralEmptyStringView done\n"); +} + +template <typename CHAR> +void TestProfilerStringView() { + if constexpr (std::is_same_v<CHAR, char>) { + printf("TestProfilerStringView<char>...\n"); + } else if constexpr (std::is_same_v<CHAR, char16_t>) { + printf("TestProfilerStringView<char16_t>...\n"); + } else { + MOZ_RELEASE_ASSERT(false, + "TestProfilerStringView only handles char and char16_t"); + } + + // Used to verify implicit constructions, as this will normally be used in + // function parameters. + auto BSV = [](mozilla::ProfilerStringView<CHAR>&& aBSV) { + return std::move(aBSV); + }; + + // These look like string literals, as expected by some string constructors. + const CHAR empty[0 + 1] = {CHAR('\0')}; + const CHAR hi[2 + 1] = { + CHAR('h'), + CHAR('i'), + CHAR('\0'), + }; + + // Literal empty string. + MOZ_RELEASE_ASSERT(BSV(empty).Length() == 0); + MOZ_RELEASE_ASSERT(BSV(empty).AsSpan().IsEmpty()); + MOZ_RELEASE_ASSERT(BSV(empty).IsLiteral()); + MOZ_RELEASE_ASSERT(!BSV(empty).IsReference()); + + // Literal non-empty string. + MOZ_RELEASE_ASSERT(BSV(hi).Length() == 2); + MOZ_RELEASE_ASSERT(BSV(hi).AsSpan().Elements()); + MOZ_RELEASE_ASSERT(BSV(hi).AsSpan().Elements()[0] == CHAR('h')); + MOZ_RELEASE_ASSERT(BSV(hi).AsSpan().Elements()[1] == CHAR('i')); + MOZ_RELEASE_ASSERT(BSV(hi).IsLiteral()); + MOZ_RELEASE_ASSERT(!BSV(hi).IsReference()); + + // std::string_view to a literal empty string. + MOZ_RELEASE_ASSERT(BSV(std::basic_string_view<CHAR>(empty)).Length() == 0); + MOZ_RELEASE_ASSERT( + BSV(std::basic_string_view<CHAR>(empty)).AsSpan().IsEmpty()); + MOZ_RELEASE_ASSERT(!BSV(std::basic_string_view<CHAR>(empty)).IsLiteral()); + MOZ_RELEASE_ASSERT(BSV(std::basic_string_view<CHAR>(empty)).IsReference()); + + // std::string_view to a literal non-empty string. + MOZ_RELEASE_ASSERT(BSV(std::basic_string_view<CHAR>(hi)).Length() == 2); + MOZ_RELEASE_ASSERT(BSV(std::basic_string_view<CHAR>(hi)).AsSpan().Elements()); + MOZ_RELEASE_ASSERT( + BSV(std::basic_string_view<CHAR>(hi)).AsSpan().Elements()[0] == + CHAR('h')); + MOZ_RELEASE_ASSERT( + BSV(std::basic_string_view<CHAR>(hi)).AsSpan().Elements()[1] == + CHAR('i')); + MOZ_RELEASE_ASSERT(!BSV(std::basic_string_view<CHAR>(hi)).IsLiteral()); + MOZ_RELEASE_ASSERT(BSV(std::basic_string_view<CHAR>(hi)).IsReference()); + + // Default std::string_view points at nullptr, ProfilerStringView converts it + // to the literal empty string. + MOZ_RELEASE_ASSERT(BSV(std::basic_string_view<CHAR>()).Length() == 0); + MOZ_RELEASE_ASSERT(!std::basic_string_view<CHAR>().data()); + MOZ_RELEASE_ASSERT(BSV(std::basic_string_view<CHAR>()).AsSpan().IsEmpty()); + MOZ_RELEASE_ASSERT(BSV(std::basic_string_view<CHAR>()).IsLiteral()); + MOZ_RELEASE_ASSERT(!BSV(std::basic_string_view<CHAR>()).IsReference()); + + // std::string to a literal empty string. + MOZ_RELEASE_ASSERT(BSV(std::basic_string<CHAR>(empty)).Length() == 0); + MOZ_RELEASE_ASSERT(BSV(std::basic_string<CHAR>(empty)).AsSpan().IsEmpty()); + MOZ_RELEASE_ASSERT(!BSV(std::basic_string<CHAR>(empty)).IsLiteral()); + MOZ_RELEASE_ASSERT(BSV(std::basic_string<CHAR>(empty)).IsReference()); + + // std::string to a literal non-empty string. + MOZ_RELEASE_ASSERT(BSV(std::basic_string<CHAR>(hi)).Length() == 2); + MOZ_RELEASE_ASSERT(BSV(std::basic_string<CHAR>(hi)).AsSpan().Elements()); + MOZ_RELEASE_ASSERT(BSV(std::basic_string<CHAR>(hi)).AsSpan().Elements()[0] == + CHAR('h')); + MOZ_RELEASE_ASSERT(BSV(std::basic_string<CHAR>(hi)).AsSpan().Elements()[1] == + CHAR('i')); + MOZ_RELEASE_ASSERT(!BSV(std::basic_string<CHAR>(hi)).IsLiteral()); + MOZ_RELEASE_ASSERT(BSV(std::basic_string<CHAR>(hi)).IsReference()); + + // Default std::string contains an empty null-terminated string. + MOZ_RELEASE_ASSERT(BSV(std::basic_string<CHAR>()).Length() == 0); + MOZ_RELEASE_ASSERT(std::basic_string<CHAR>().data()); + MOZ_RELEASE_ASSERT(BSV(std::basic_string<CHAR>()).AsSpan().IsEmpty()); + MOZ_RELEASE_ASSERT(!BSV(std::basic_string<CHAR>()).IsLiteral()); + MOZ_RELEASE_ASSERT(BSV(std::basic_string<CHAR>()).IsReference()); + + // Class that quacks like nsTString (with Data(), Length(), IsLiteral()), to + // check that ProfilerStringView can read from them. + class FakeNsTString { + public: + FakeNsTString(const CHAR* aData, size_t aLength, bool aIsLiteral) + : mData(aData), mLength(aLength), mIsLiteral(aIsLiteral) {} + + const CHAR* Data() const { return mData; } + size_t Length() const { return mLength; } + bool IsLiteral() const { return mIsLiteral; } + + private: + const CHAR* mData; + size_t mLength; + bool mIsLiteral; + }; + + // FakeNsTString to nullptr. + MOZ_RELEASE_ASSERT(BSV(FakeNsTString(nullptr, 0, true)).Length() == 0); + MOZ_RELEASE_ASSERT(BSV(FakeNsTString(nullptr, 0, true)).AsSpan().IsEmpty()); + MOZ_RELEASE_ASSERT(BSV(FakeNsTString(nullptr, 0, true)).IsLiteral()); + MOZ_RELEASE_ASSERT(!BSV(FakeNsTString(nullptr, 0, true)).IsReference()); + + // FakeNsTString to a literal empty string. + MOZ_RELEASE_ASSERT(BSV(FakeNsTString(empty, 0, true)).Length() == 0); + MOZ_RELEASE_ASSERT(BSV(FakeNsTString(empty, 0, true)).AsSpan().IsEmpty()); + MOZ_RELEASE_ASSERT(BSV(FakeNsTString(empty, 0, true)).IsLiteral()); + MOZ_RELEASE_ASSERT(!BSV(FakeNsTString(empty, 0, true)).IsReference()); + + // FakeNsTString to a literal non-empty string. + MOZ_RELEASE_ASSERT(BSV(FakeNsTString(hi, 2, true)).Length() == 2); + MOZ_RELEASE_ASSERT(BSV(FakeNsTString(hi, 2, true)).AsSpan().Elements()); + MOZ_RELEASE_ASSERT(BSV(FakeNsTString(hi, 2, true)).AsSpan().Elements()[0] == + CHAR('h')); + MOZ_RELEASE_ASSERT(BSV(FakeNsTString(hi, 2, true)).AsSpan().Elements()[1] == + CHAR('i')); + MOZ_RELEASE_ASSERT(BSV(FakeNsTString(hi, 2, true)).IsLiteral()); + MOZ_RELEASE_ASSERT(!BSV(FakeNsTString(hi, 2, true)).IsReference()); + + // FakeNsTString to a non-literal non-empty string. + MOZ_RELEASE_ASSERT(BSV(FakeNsTString(hi, 2, false)).Length() == 2); + MOZ_RELEASE_ASSERT(BSV(FakeNsTString(hi, 2, false)).AsSpan().Elements()); + MOZ_RELEASE_ASSERT(BSV(FakeNsTString(hi, 2, false)).AsSpan().Elements()[0] == + CHAR('h')); + MOZ_RELEASE_ASSERT(BSV(FakeNsTString(hi, 2, false)).AsSpan().Elements()[1] == + CHAR('i')); + MOZ_RELEASE_ASSERT(!BSV(FakeNsTString(hi, 2, false)).IsLiteral()); + MOZ_RELEASE_ASSERT(BSV(FakeNsTString(hi, 2, false)).IsReference()); + + // Serialization and deserialization (with ownership). + constexpr size_t bufferMaxSize = 1024; + constexpr ProfileChunkedBuffer::Length chunkMinSize = 128; + ProfileBufferChunkManagerWithLocalLimit cm(bufferMaxSize, chunkMinSize); + ProfileChunkedBuffer cb(ProfileChunkedBuffer::ThreadSafety::WithMutex, cm); + + // Literal string, serialized as raw pointer. + MOZ_RELEASE_ASSERT(cb.PutObject(BSV(hi))); + { + unsigned read = 0; + ProfilerStringView<CHAR> outerBSV; + cb.ReadEach([&](ProfileBufferEntryReader& aER) { + ++read; + auto bsv = aER.ReadObject<ProfilerStringView<CHAR>>(); + MOZ_RELEASE_ASSERT(bsv.Length() == 2); + MOZ_RELEASE_ASSERT(bsv.AsSpan().Elements()); + MOZ_RELEASE_ASSERT(bsv.AsSpan().Elements()[0] == CHAR('h')); + MOZ_RELEASE_ASSERT(bsv.AsSpan().Elements()[1] == CHAR('i')); + MOZ_RELEASE_ASSERT(bsv.IsLiteral()); + MOZ_RELEASE_ASSERT(!bsv.IsReference()); + outerBSV = std::move(bsv); + }); + MOZ_RELEASE_ASSERT(read == 1); + MOZ_RELEASE_ASSERT(outerBSV.Length() == 2); + MOZ_RELEASE_ASSERT(outerBSV.AsSpan().Elements()); + MOZ_RELEASE_ASSERT(outerBSV.AsSpan().Elements()[0] == CHAR('h')); + MOZ_RELEASE_ASSERT(outerBSV.AsSpan().Elements()[1] == CHAR('i')); + MOZ_RELEASE_ASSERT(outerBSV.IsLiteral()); + MOZ_RELEASE_ASSERT(!outerBSV.IsReference()); + } + + MOZ_RELEASE_ASSERT(cb.GetState().mRangeStart == 1u); + + cb.Clear(); + + // Non-literal string, content is serialized. + + // We'll try to write 4 strings, such that the 4th one will cross into the + // next chunk. + unsigned guessedChunkBytes = unsigned(cb.GetState().mRangeStart) - 1u; + static constexpr unsigned stringCount = 4u; + const unsigned stringSize = + guessedChunkBytes / stringCount / sizeof(CHAR) + 3u; + + std::basic_string<CHAR> longString; + longString.reserve(stringSize); + for (unsigned i = 0; i < stringSize; ++i) { + longString += CHAR('0' + i); + } + + for (unsigned i = 0; i < stringCount; ++i) { + MOZ_RELEASE_ASSERT(cb.PutObject(BSV(longString))); + } + + { + unsigned read = 0; + ProfilerStringView<CHAR> outerBSV; + cb.ReadEach([&](ProfileBufferEntryReader& aER) { + ++read; + { + auto bsv = aER.ReadObject<ProfilerStringView<CHAR>>(); + MOZ_RELEASE_ASSERT(bsv.Length() == stringSize); + MOZ_RELEASE_ASSERT(bsv.AsSpan().Elements()); + for (unsigned i = 0; i < stringSize; ++i) { + MOZ_RELEASE_ASSERT(bsv.AsSpan().Elements()[i] == CHAR('0' + i)); + longString += '0' + i; + } + MOZ_RELEASE_ASSERT(!bsv.IsLiteral()); + // The first 3 should be references (because they fit in one chunk, so + // they can be referenced directly), which the 4th one have to be copied + // out of two chunks and stitched back together. + MOZ_RELEASE_ASSERT(bsv.IsReference() == (read != 4)); + + // Test move of ownership. + outerBSV = std::move(bsv); + // After a move, references stay complete, while a non-reference had a + // buffer that has been moved out. + // NOLINTNEXTLINE(bugprone-use-after-move,clang-analyzer-cplusplus.Move) + MOZ_RELEASE_ASSERT(bsv.Length() == ((read != 4) ? stringSize : 0)); + } + + MOZ_RELEASE_ASSERT(outerBSV.Length() == stringSize); + MOZ_RELEASE_ASSERT(outerBSV.AsSpan().Elements()); + for (unsigned i = 0; i < stringSize; ++i) { + MOZ_RELEASE_ASSERT(outerBSV.AsSpan().Elements()[i] == CHAR('0' + i)); + longString += '0' + i; + } + MOZ_RELEASE_ASSERT(!outerBSV.IsLiteral()); + MOZ_RELEASE_ASSERT(outerBSV.IsReference() == (read != 4)); + }); + MOZ_RELEASE_ASSERT(read == 4); + } + + if constexpr (std::is_same_v<CHAR, char>) { + printf("TestProfilerStringView<char> done\n"); + } else if constexpr (std::is_same_v<CHAR, char16_t>) { + printf("TestProfilerStringView<char16_t> done\n"); + } +} + +void TestProfilerDependencies() { + TestPowerOfTwoMask(); + TestPowerOfTwo(); + TestLEB128(); + TestJSONTimeOutput(); + TestChunk(); + TestChunkManagerSingle(); + TestChunkManagerWithLocalLimit(); + TestControlledChunkManagerUpdate(); + TestControlledChunkManagerWithLocalLimit(); + TestChunkedBuffer(); + TestChunkedBufferSingle(); + TestModuloBuffer(); + TestBlocksRingBufferAPI(); + TestBlocksRingBufferUnderlyingBufferChanges(); + TestBlocksRingBufferThreading(); + TestBlocksRingBufferSerialization(); + TestLiteralEmptyStringView(); + TestProfilerStringView<char>(); + TestProfilerStringView<char16_t>(); +} + +// Increase the depth, to a maximum (to avoid too-deep recursion). +static constexpr size_t NextDepth(size_t aDepth) { + constexpr size_t MAX_DEPTH = 128; + return (aDepth < MAX_DEPTH) ? (aDepth + 1) : aDepth; +} + +Atomic<bool, Relaxed> sStopFibonacci; + +// Compute fibonacci the hard way (recursively: `f(n)=f(n-1)+f(n-2)`), and +// prevent inlining. +// The template parameter makes each depth be a separate function, to better +// distinguish them in the profiler output. +template <size_t DEPTH = 0> +MOZ_NEVER_INLINE unsigned long long Fibonacci(unsigned long long n) { + AUTO_BASE_PROFILER_LABEL_DYNAMIC_STRING("fib", OTHER, std::to_string(DEPTH)); + if (n == 0) { + return 0; + } + if (n == 1) { + return 1; + } + if (DEPTH < 5 && sStopFibonacci) { + return 1'000'000'000; + } + TimeStamp start = TimeStamp::Now(); + static constexpr size_t MAX_MARKER_DEPTH = 10; + unsigned long long f2 = Fibonacci<NextDepth(DEPTH)>(n - 2); + if (DEPTH == 0) { + BASE_PROFILER_MARKER_UNTYPED("Half-way through Fibonacci", OTHER); + } + unsigned long long f1 = Fibonacci<NextDepth(DEPTH)>(n - 1); + if (DEPTH < MAX_MARKER_DEPTH) { + BASE_PROFILER_MARKER_TEXT("fib", OTHER, + MarkerTiming::IntervalUntilNowFrom(start), + std::to_string(DEPTH)); + } + return f2 + f1; +} + +void TestProfiler() { + printf("TestProfiler starting -- pid: %" PRIu64 ", tid: %" PRIu64 "\n", + uint64_t(baseprofiler::profiler_current_process_id().ToNumber()), + uint64_t(baseprofiler::profiler_current_thread_id().ToNumber())); + // ::SleepMilli(10000); + + TestProfilerDependencies(); + + { + MOZ_RELEASE_ASSERT(!baseprofiler::profiler_is_active()); + MOZ_RELEASE_ASSERT(!baseprofiler::profiler_thread_is_being_profiled()); + MOZ_RELEASE_ASSERT(!baseprofiler::profiler_thread_is_sleeping()); + + const baseprofiler::BaseProfilerThreadId mainThreadId = + mozilla::baseprofiler::profiler_current_thread_id(); + + MOZ_RELEASE_ASSERT(mozilla::baseprofiler::profiler_main_thread_id() == + mainThreadId); + MOZ_RELEASE_ASSERT(mozilla::baseprofiler::profiler_is_main_thread()); + + std::thread testThread([&]() { + const baseprofiler::BaseProfilerThreadId testThreadId = + mozilla::baseprofiler::profiler_current_thread_id(); + MOZ_RELEASE_ASSERT(testThreadId != mainThreadId); + + MOZ_RELEASE_ASSERT(mozilla::baseprofiler::profiler_main_thread_id() != + testThreadId); + MOZ_RELEASE_ASSERT(!mozilla::baseprofiler::profiler_is_main_thread()); + }); + testThread.join(); + + printf("profiler_start()...\n"); + Vector<const char*> filters; + // Profile all registered threads. + MOZ_RELEASE_ASSERT(filters.append("")); + const uint32_t features = baseprofiler::ProfilerFeature::StackWalk; + baseprofiler::profiler_start(baseprofiler::BASE_PROFILER_DEFAULT_ENTRIES, + BASE_PROFILER_DEFAULT_INTERVAL, features, + filters.begin(), filters.length()); + + MOZ_RELEASE_ASSERT(baseprofiler::profiler_is_active()); + MOZ_RELEASE_ASSERT(baseprofiler::profiler_thread_is_being_profiled()); + MOZ_RELEASE_ASSERT(!baseprofiler::profiler_thread_is_sleeping()); + + sStopFibonacci = false; + + std::thread threadFib([]() { + AUTO_BASE_PROFILER_REGISTER_THREAD("fibonacci"); + SleepMilli(5); + auto cause = baseprofiler::profiler_capture_backtrace(); + AUTO_BASE_PROFILER_MARKER_TEXT( + "fibonacci", OTHER, MarkerStack::TakeBacktrace(std::move(cause)), + "First leaf call"); + static const unsigned long long fibStart = 37; + printf("Fibonacci(%llu)...\n", fibStart); + AUTO_BASE_PROFILER_LABEL("Label around Fibonacci", OTHER); + + unsigned long long f = Fibonacci(fibStart); + printf("Fibonacci(%llu) = %llu\n", fibStart, f); + }); + + std::thread threadCancelFib([]() { + AUTO_BASE_PROFILER_REGISTER_THREAD("fibonacci canceller"); + SleepMilli(5); + AUTO_BASE_PROFILER_MARKER_TEXT("fibonacci", OTHER, {}, "Canceller"); + static const int waitMaxSeconds = 10; + for (int i = 0; i < waitMaxSeconds; ++i) { + if (sStopFibonacci) { + AUTO_BASE_PROFILER_LABEL_DYNAMIC_STRING("fibCancel", OTHER, + std::to_string(i)); + return; + } + AUTO_BASE_PROFILER_THREAD_SLEEP; + SleepMilli(1000); + } + AUTO_BASE_PROFILER_LABEL_DYNAMIC_STRING("fibCancel", OTHER, + "Cancelling!"); + sStopFibonacci = true; + }); + + { + AUTO_BASE_PROFILER_MARKER_TEXT("main thread", OTHER, {}, + "joining fibonacci thread"); + AUTO_BASE_PROFILER_THREAD_SLEEP; + threadFib.join(); + } + + { + AUTO_BASE_PROFILER_MARKER_TEXT("main thread", OTHER, {}, + "joining fibonacci-canceller thread"); + sStopFibonacci = true; + AUTO_BASE_PROFILER_THREAD_SLEEP; + threadCancelFib.join(); + } + + // Just making sure all payloads know how to (de)serialize and stream. + + MOZ_RELEASE_ASSERT( + baseprofiler::AddMarker("markers 2.0 without options (omitted)", + mozilla::baseprofiler::category::OTHER)); + + MOZ_RELEASE_ASSERT(baseprofiler::AddMarker( + "markers 2.0 without options (implicit brace-init)", + mozilla::baseprofiler::category::OTHER, {})); + + MOZ_RELEASE_ASSERT(baseprofiler::AddMarker( + "markers 2.0 without options (explicit init)", + mozilla::baseprofiler::category::OTHER, MarkerOptions())); + + MOZ_RELEASE_ASSERT(baseprofiler::AddMarker( + "markers 2.0 without options (explicit brace-init)", + mozilla::baseprofiler::category::OTHER, MarkerOptions{})); + + MOZ_RELEASE_ASSERT(baseprofiler::AddMarker( + "markers 2.0 with one option (implicit)", + mozilla::baseprofiler::category::OTHER, MarkerInnerWindowId(123))); + + MOZ_RELEASE_ASSERT(baseprofiler::AddMarker( + "markers 2.0 with one option (implicit brace-init)", + mozilla::baseprofiler::category::OTHER, {MarkerInnerWindowId(123)})); + + MOZ_RELEASE_ASSERT( + baseprofiler::AddMarker("markers 2.0 with one option (explicit init)", + mozilla::baseprofiler::category::OTHER, + MarkerOptions(MarkerInnerWindowId(123)))); + + MOZ_RELEASE_ASSERT(baseprofiler::AddMarker( + "markers 2.0 with one option (explicit brace-init)", + mozilla::baseprofiler::category::OTHER, + MarkerOptions{MarkerInnerWindowId(123)})); + + MOZ_RELEASE_ASSERT(baseprofiler::AddMarker( + "markers 2.0 with two options (implicit brace-init)", + mozilla::baseprofiler::category::OTHER, + {MarkerInnerWindowId(123), MarkerStack::Capture()})); + + MOZ_RELEASE_ASSERT(baseprofiler::AddMarker( + "markers 2.0 with two options (explicit init)", + mozilla::baseprofiler::category::OTHER, + MarkerOptions(MarkerInnerWindowId(123), MarkerStack::Capture()))); + + MOZ_RELEASE_ASSERT(baseprofiler::AddMarker( + "markers 2.0 with two options (explicit brace-init)", + mozilla::baseprofiler::category::OTHER, + MarkerOptions{MarkerInnerWindowId(123), MarkerStack::Capture()})); + + MOZ_RELEASE_ASSERT( + baseprofiler::AddMarker("default-templated markers 2.0 without options", + mozilla::baseprofiler::category::OTHER)); + + MOZ_RELEASE_ASSERT(baseprofiler::AddMarker( + "default-templated markers 2.0 with option", + mozilla::baseprofiler::category::OTHER, MarkerInnerWindowId(123))); + + MOZ_RELEASE_ASSERT(baseprofiler::AddMarker( + "explicitly-default-templated markers 2.0 without options", + mozilla::baseprofiler::category::OTHER, {}, + ::mozilla::baseprofiler::markers::NoPayload{})); + + MOZ_RELEASE_ASSERT(baseprofiler::AddMarker( + "explicitly-default-templated markers 2.0 with option", + mozilla::baseprofiler::category::OTHER, MarkerInnerWindowId(123), + ::mozilla::baseprofiler::markers::NoPayload{})); + + MOZ_RELEASE_ASSERT(baseprofiler::AddMarker( + "tracing", mozilla::baseprofiler::category::OTHER, {}, + mozilla::baseprofiler::markers::Tracing{}, "category")); + + MOZ_RELEASE_ASSERT(baseprofiler::AddMarker( + "text", mozilla::baseprofiler::category::OTHER, {}, + mozilla::baseprofiler::markers::TextMarker{}, "text text")); + + MOZ_RELEASE_ASSERT(baseprofiler::AddMarker( + "media sample", mozilla::baseprofiler::category::OTHER, {}, + mozilla::baseprofiler::markers::MediaSampleMarker{}, 123, 456, 789)); + + MOZ_RELEASE_ASSERT(baseprofiler::AddMarker( + "video falling behind", mozilla::baseprofiler::category::OTHER, {}, + mozilla::baseprofiler::markers::VideoFallingBehindMarker{}, 123, 456)); + + printf("Sleep 1s...\n"); + { + AUTO_BASE_PROFILER_THREAD_SLEEP; + SleepMilli(1000); + } + + printf("baseprofiler_pause()...\n"); + baseprofiler::profiler_pause(); + + MOZ_RELEASE_ASSERT(!baseprofiler::profiler_thread_is_being_profiled()); + + Maybe<baseprofiler::ProfilerBufferInfo> info = + baseprofiler::profiler_get_buffer_info(); + MOZ_RELEASE_ASSERT(info.isSome()); + printf("Profiler buffer range: %llu .. %llu (%llu bytes)\n", + static_cast<unsigned long long>(info->mRangeStart), + static_cast<unsigned long long>(info->mRangeEnd), + // sizeof(ProfileBufferEntry) == 9 + (static_cast<unsigned long long>(info->mRangeEnd) - + static_cast<unsigned long long>(info->mRangeStart)) * + 9); + printf("Stats: min(us) .. mean(us) .. max(us) [count]\n"); + printf("- Intervals: %7.1f .. %7.1f .. %7.1f [%u]\n", + info->mIntervalsUs.min, + info->mIntervalsUs.sum / info->mIntervalsUs.n, + info->mIntervalsUs.max, info->mIntervalsUs.n); + printf("- Overheads: %7.1f .. %7.1f .. %7.1f [%u]\n", + info->mOverheadsUs.min, + info->mOverheadsUs.sum / info->mOverheadsUs.n, + info->mOverheadsUs.max, info->mOverheadsUs.n); + printf(" - Locking: %7.1f .. %7.1f .. %7.1f [%u]\n", + info->mLockingsUs.min, info->mLockingsUs.sum / info->mLockingsUs.n, + info->mLockingsUs.max, info->mLockingsUs.n); + printf(" - Clearning: %7.1f .. %7.1f .. %7.1f [%u]\n", + info->mCleaningsUs.min, + info->mCleaningsUs.sum / info->mCleaningsUs.n, + info->mCleaningsUs.max, info->mCleaningsUs.n); + printf(" - Counters: %7.1f .. %7.1f .. %7.1f [%u]\n", + info->mCountersUs.min, info->mCountersUs.sum / info->mCountersUs.n, + info->mCountersUs.max, info->mCountersUs.n); + printf(" - Threads: %7.1f .. %7.1f .. %7.1f [%u]\n", + info->mThreadsUs.min, info->mThreadsUs.sum / info->mThreadsUs.n, + info->mThreadsUs.max, info->mThreadsUs.n); + + printf("baseprofiler_get_profile()...\n"); + UniquePtr<char[]> profile = baseprofiler::profiler_get_profile(); + + // Use a string view over the profile contents, for easier testing. + std::string_view profileSV = profile.get(); + + constexpr const auto svnpos = std::string_view::npos; + // TODO: Properly parse profile and check fields. + // Check for some expected marker schema JSON output. + MOZ_RELEASE_ASSERT(profileSV.find("\"markerSchema\":[") != svnpos); + MOZ_RELEASE_ASSERT(profileSV.find("\"name\":\"Text\",") != svnpos); + MOZ_RELEASE_ASSERT(profileSV.find("\"name\":\"tracing\",") != svnpos); + MOZ_RELEASE_ASSERT(profileSV.find("\"name\":\"MediaSample\",") != svnpos); + MOZ_RELEASE_ASSERT(profileSV.find("\"display\":[") != svnpos); + MOZ_RELEASE_ASSERT(profileSV.find("\"marker-chart\"") != svnpos); + MOZ_RELEASE_ASSERT(profileSV.find("\"marker-table\"") != svnpos); + MOZ_RELEASE_ASSERT(profileSV.find("\"format\":\"string\"") != svnpos); + // TODO: Add more checks for what's expected in the profile. Some of them + // are done in gtest's. + + printf("baseprofiler_save_profile_to_file()...\n"); + baseprofiler::baseprofiler_save_profile_to_file( + "TestProfiler_profile.json"); + + printf("profiler_stop()...\n"); + baseprofiler::profiler_stop(); + + MOZ_RELEASE_ASSERT(!baseprofiler::profiler_is_active()); + MOZ_RELEASE_ASSERT(!baseprofiler::profiler_thread_is_being_profiled()); + MOZ_RELEASE_ASSERT(!baseprofiler::profiler_thread_is_sleeping()); + + printf("profiler_shutdown()...\n"); + } + + printf("TestProfiler done\n"); +} + +// Minimal string escaping, similar to how C++ stringliterals should be entered, +// to help update comparison strings in tests below. +void printEscaped(std::string_view aString) { + for (const char c : aString) { + switch (c) { + case '\n': + fprintf(stderr, "\\n\n"); + break; + case '"': + fprintf(stderr, "\\\""); + break; + case '\\': + fprintf(stderr, "\\\\"); + break; + default: + if (c >= ' ' && c <= '~') { + fprintf(stderr, "%c", c); + } else { + fprintf(stderr, "\\x%02x", unsigned(c)); + } + break; + } + } +} + +// Run aF(SpliceableChunkedJSONWriter&, UniqueJSONStrings&) from inside a JSON +// array, then output the string table, and compare the full output to +// aExpected. +template <typename F> +static void VerifyUniqueStringContents( + F&& aF, std::string_view aExpectedData, + std::string_view aExpectedUniqueStrings, + mozilla::baseprofiler::UniqueJSONStrings* aUniqueStringsOrNull = nullptr) { + mozilla::baseprofiler::SpliceableChunkedJSONWriter writer{ + FailureLatchInfallibleSource::Singleton()}; + + MOZ_RELEASE_ASSERT(!writer.ChunkedWriteFunc().Fallible()); + MOZ_RELEASE_ASSERT(!writer.ChunkedWriteFunc().Failed()); + MOZ_RELEASE_ASSERT(!writer.ChunkedWriteFunc().GetFailure()); + MOZ_RELEASE_ASSERT(&writer.ChunkedWriteFunc().SourceFailureLatch() == + &mozilla::FailureLatchInfallibleSource::Singleton()); + MOZ_RELEASE_ASSERT( + &std::as_const(writer.ChunkedWriteFunc()).SourceFailureLatch() == + &mozilla::FailureLatchInfallibleSource::Singleton()); + + MOZ_RELEASE_ASSERT(!writer.Fallible()); + MOZ_RELEASE_ASSERT(!writer.Failed()); + MOZ_RELEASE_ASSERT(!writer.GetFailure()); + MOZ_RELEASE_ASSERT(&writer.SourceFailureLatch() == + &mozilla::FailureLatchInfallibleSource::Singleton()); + MOZ_RELEASE_ASSERT(&std::as_const(writer).SourceFailureLatch() == + &mozilla::FailureLatchInfallibleSource::Singleton()); + + // By default use a local UniqueJSONStrings, otherwise use the one provided. + mozilla::baseprofiler::UniqueJSONStrings localUniqueStrings{ + FailureLatchInfallibleSource::Singleton()}; + MOZ_RELEASE_ASSERT(!localUniqueStrings.Fallible()); + MOZ_RELEASE_ASSERT(!localUniqueStrings.Failed()); + MOZ_RELEASE_ASSERT(!localUniqueStrings.GetFailure()); + MOZ_RELEASE_ASSERT(&localUniqueStrings.SourceFailureLatch() == + &mozilla::FailureLatchInfallibleSource::Singleton()); + MOZ_RELEASE_ASSERT(&std::as_const(localUniqueStrings).SourceFailureLatch() == + &mozilla::FailureLatchInfallibleSource::Singleton()); + + mozilla::baseprofiler::UniqueJSONStrings& uniqueStrings = + aUniqueStringsOrNull ? *aUniqueStringsOrNull : localUniqueStrings; + MOZ_RELEASE_ASSERT(!uniqueStrings.Failed()); + MOZ_RELEASE_ASSERT(!uniqueStrings.GetFailure()); + + writer.Start(); + { + writer.StartArrayProperty("data"); + { std::forward<F>(aF)(writer, uniqueStrings); } + writer.EndArray(); + + writer.StartArrayProperty("stringTable"); + { uniqueStrings.SpliceStringTableElements(writer); } + writer.EndArray(); + } + writer.End(); + + MOZ_RELEASE_ASSERT(!uniqueStrings.Failed()); + MOZ_RELEASE_ASSERT(!uniqueStrings.GetFailure()); + + MOZ_RELEASE_ASSERT(!writer.ChunkedWriteFunc().Failed()); + MOZ_RELEASE_ASSERT(!writer.ChunkedWriteFunc().GetFailure()); + + MOZ_RELEASE_ASSERT(!writer.Failed()); + MOZ_RELEASE_ASSERT(!writer.GetFailure()); + + UniquePtr<char[]> jsonString = writer.ChunkedWriteFunc().CopyData(); + MOZ_RELEASE_ASSERT(jsonString); + std::string_view jsonStringView(jsonString.get()); + const size_t length = writer.ChunkedWriteFunc().Length(); + MOZ_RELEASE_ASSERT(length == jsonStringView.length()); + std::string expected = "{\"data\":["; + expected += aExpectedData; + expected += "],\"stringTable\":["; + expected += aExpectedUniqueStrings; + expected += "]}"; + if (jsonStringView != expected) { + fprintf(stderr, + "Expected:\n" + "------\n"); + printEscaped(expected); + fprintf(stderr, + "\n" + "------\n" + "Actual:\n" + "------\n"); + printEscaped(jsonStringView); + fprintf(stderr, + "\n" + "------\n"); + } + MOZ_RELEASE_ASSERT(jsonStringView == expected); +} + +void TestUniqueJSONStrings() { + printf("TestUniqueJSONStrings...\n"); + + using SCJW = mozilla::baseprofiler::SpliceableChunkedJSONWriter; + using UJS = mozilla::baseprofiler::UniqueJSONStrings; + + // Empty everything. + VerifyUniqueStringContents([](SCJW& aWriter, UJS& aUniqueStrings) {}, "", ""); + + // Empty unique strings. + VerifyUniqueStringContents( + [](SCJW& aWriter, UJS& aUniqueStrings) { + aWriter.StringElement("string"); + }, + R"("string")", ""); + + // One unique string. + VerifyUniqueStringContents( + [](SCJW& aWriter, UJS& aUniqueStrings) { + aUniqueStrings.WriteElement(aWriter, "string"); + }, + "0", R"("string")"); + + // One unique string twice. + VerifyUniqueStringContents( + [](SCJW& aWriter, UJS& aUniqueStrings) { + aUniqueStrings.WriteElement(aWriter, "string"); + aUniqueStrings.WriteElement(aWriter, "string"); + }, + "0,0", R"("string")"); + + // Two single unique strings. + VerifyUniqueStringContents( + [](SCJW& aWriter, UJS& aUniqueStrings) { + aUniqueStrings.WriteElement(aWriter, "string0"); + aUniqueStrings.WriteElement(aWriter, "string1"); + }, + "0,1", R"("string0","string1")"); + + // Two unique strings with repetition. + VerifyUniqueStringContents( + [](SCJW& aWriter, UJS& aUniqueStrings) { + aUniqueStrings.WriteElement(aWriter, "string0"); + aUniqueStrings.WriteElement(aWriter, "string1"); + aUniqueStrings.WriteElement(aWriter, "string0"); + }, + "0,1,0", R"("string0","string1")"); + + // Mix some object properties, for coverage. + VerifyUniqueStringContents( + [](SCJW& aWriter, UJS& aUniqueStrings) { + aUniqueStrings.WriteElement(aWriter, "string0"); + aWriter.StartObjectElement(); + { + aUniqueStrings.WriteProperty(aWriter, "p0", "prop"); + aUniqueStrings.WriteProperty(aWriter, "p1", "string0"); + aUniqueStrings.WriteProperty(aWriter, "p2", "prop"); + } + aWriter.EndObject(); + aUniqueStrings.WriteElement(aWriter, "string1"); + aUniqueStrings.WriteElement(aWriter, "string0"); + aUniqueStrings.WriteElement(aWriter, "prop"); + }, + R"(0,{"p0":1,"p1":0,"p2":1},2,0,1)", R"("string0","prop","string1")"); + + // Unique string table with pre-existing data. + { + UJS ujs{FailureLatchInfallibleSource::Singleton()}; + { + SCJW writer{FailureLatchInfallibleSource::Singleton()}; + ujs.WriteElement(writer, "external0"); + ujs.WriteElement(writer, "external1"); + ujs.WriteElement(writer, "external0"); + } + VerifyUniqueStringContents( + [](SCJW& aWriter, UJS& aUniqueStrings) { + aUniqueStrings.WriteElement(aWriter, "string0"); + aUniqueStrings.WriteElement(aWriter, "string1"); + aUniqueStrings.WriteElement(aWriter, "string0"); + }, + "2,3,2", R"("external0","external1","string0","string1")", &ujs); + } + + // Unique string table with pre-existing data from another table. + { + UJS ujs{FailureLatchInfallibleSource::Singleton()}; + { + SCJW writer{FailureLatchInfallibleSource::Singleton()}; + ujs.WriteElement(writer, "external0"); + ujs.WriteElement(writer, "external1"); + ujs.WriteElement(writer, "external0"); + } + UJS ujsCopy(FailureLatchInfallibleSource::Singleton(), ujs, + mozilla::ProgressLogger{}); + VerifyUniqueStringContents( + [](SCJW& aWriter, UJS& aUniqueStrings) { + aUniqueStrings.WriteElement(aWriter, "string0"); + aUniqueStrings.WriteElement(aWriter, "string1"); + aUniqueStrings.WriteElement(aWriter, "string0"); + }, + "2,3,2", R"("external0","external1","string0","string1")", &ujs); + } + + // Unique string table through SpliceableJSONWriter. + VerifyUniqueStringContents( + [](SCJW& aWriter, UJS& aUniqueStrings) { + aWriter.SetUniqueStrings(aUniqueStrings); + aWriter.UniqueStringElement("string0"); + aWriter.StartObjectElement(); + { + aWriter.UniqueStringProperty("p0", "prop"); + aWriter.UniqueStringProperty("p1", "string0"); + aWriter.UniqueStringProperty("p2", "prop"); + } + aWriter.EndObject(); + aWriter.UniqueStringElement("string1"); + aWriter.UniqueStringElement("string0"); + aWriter.UniqueStringElement("prop"); + aWriter.ResetUniqueStrings(); + }, + R"(0,{"p0":1,"p1":0,"p2":1},2,0,1)", R"("string0","prop","string1")"); + + printf("TestUniqueJSONStrings done\n"); +} + +void StreamMarkers(const mozilla::ProfileChunkedBuffer& aBuffer, + mozilla::baseprofiler::SpliceableJSONWriter& aWriter) { + aWriter.StartArrayProperty("data"); + { + aBuffer.ReadEach([&](mozilla::ProfileBufferEntryReader& aEntryReader) { + mozilla::ProfileBufferEntryKind entryKind = + aEntryReader.ReadObject<mozilla::ProfileBufferEntryKind>(); + MOZ_RELEASE_ASSERT(entryKind == mozilla::ProfileBufferEntryKind::Marker); + + mozilla::base_profiler_markers_detail::DeserializeAfterKindAndStream( + aEntryReader, + [&](const mozilla::baseprofiler::BaseProfilerThreadId&) { + return &aWriter; + }, + [&](mozilla::ProfileChunkedBuffer&) { + aWriter.StringElement("Real backtrace would be here"); + }, + [&](mozilla::base_profiler_markers_detail::Streaming:: + DeserializerTag) {}); + }); + } + aWriter.EndArray(); +} + +void PrintMarkers(const mozilla::ProfileChunkedBuffer& aBuffer) { + mozilla::baseprofiler::SpliceableJSONWriter writer( + mozilla::MakeUnique<mozilla::baseprofiler::OStreamJSONWriteFunc>( + std::cout), + FailureLatchInfallibleSource::Singleton()); + mozilla::baseprofiler::UniqueJSONStrings uniqueStrings{ + FailureLatchInfallibleSource::Singleton()}; + writer.SetUniqueStrings(uniqueStrings); + writer.Start(); + { + StreamMarkers(aBuffer, writer); + + writer.StartArrayProperty("stringTable"); + { uniqueStrings.SpliceStringTableElements(writer); } + writer.EndArray(); + } + writer.End(); + writer.ResetUniqueStrings(); +} + +static void SubTestMarkerCategory( + const mozilla::MarkerCategory& aMarkerCategory, + const mozilla::baseprofiler::ProfilingCategoryPair& aProfilingCategoryPair, + const mozilla::baseprofiler::ProfilingCategory& aProfilingCategory) { + MOZ_RELEASE_ASSERT(aMarkerCategory.CategoryPair() == aProfilingCategoryPair, + "Unexpected MarkerCategory::CategoryPair()"); + + MOZ_RELEASE_ASSERT( + mozilla::MarkerCategory(aProfilingCategoryPair).CategoryPair() == + aProfilingCategoryPair, + "MarkerCategory(<name>).CategoryPair() should return <name>"); + + MOZ_RELEASE_ASSERT(aMarkerCategory.GetCategory() == aProfilingCategory, + "Unexpected MarkerCategory::GetCategory()"); + + mozilla::ProfileBufferChunkManagerSingle chunkManager(512); + mozilla::ProfileChunkedBuffer buffer( + mozilla::ProfileChunkedBuffer::ThreadSafety::WithoutMutex, chunkManager); + mozilla::ProfileBufferBlockIndex i = buffer.PutObject(aMarkerCategory); + MOZ_RELEASE_ASSERT(i != mozilla::ProfileBufferBlockIndex{}, + "Failed serialization"); + buffer.ReadEach([&](mozilla::ProfileBufferEntryReader& aER, + mozilla::ProfileBufferBlockIndex aIndex) { + MOZ_RELEASE_ASSERT(aIndex == i, "Unexpected deserialization index"); + const auto readCategory = aER.ReadObject<mozilla::MarkerCategory>(); + MOZ_RELEASE_ASSERT(aER.RemainingBytes() == 0, + "Unexpected extra serialized bytes"); + MOZ_RELEASE_ASSERT(readCategory.CategoryPair() == aProfilingCategoryPair, + "Incorrect deserialization value"); + }); +} + +void TestMarkerCategory() { + printf("TestMarkerCategory...\n"); + + mozilla::ProfileBufferChunkManagerSingle chunkManager(512); + mozilla::ProfileChunkedBuffer buffer( + mozilla::ProfileChunkedBuffer::ThreadSafety::WithoutMutex, chunkManager); + +# define CATEGORY_ENUM_BEGIN_CATEGORY(name, labelAsString, color) +# define CATEGORY_ENUM_SUBCATEGORY(supercategory, name, labelAsString) \ + static_assert( \ + std::is_same_v<decltype(mozilla::baseprofiler::category::name), \ + const mozilla::MarkerCategory>, \ + "baseprofiler::category::<name> should be a const MarkerCategory"); \ + \ + SubTestMarkerCategory( \ + mozilla::baseprofiler::category::name, \ + mozilla::baseprofiler::ProfilingCategoryPair::name, \ + mozilla::baseprofiler::ProfilingCategory::supercategory); +# define CATEGORY_ENUM_END_CATEGORY + MOZ_PROFILING_CATEGORY_LIST(CATEGORY_ENUM_BEGIN_CATEGORY, + CATEGORY_ENUM_SUBCATEGORY, + CATEGORY_ENUM_END_CATEGORY) +# undef CATEGORY_ENUM_BEGIN_CATEGORY +# undef CATEGORY_ENUM_SUBCATEGORY +# undef CATEGORY_ENUM_END_CATEGORY + + printf("TestMarkerCategory done\n"); +} + +void TestMarkerThreadId() { + printf("TestMarkerThreadId...\n"); + + MOZ_RELEASE_ASSERT(MarkerThreadId{}.IsUnspecified()); + MOZ_RELEASE_ASSERT(!MarkerThreadId::MainThread().IsUnspecified()); + MOZ_RELEASE_ASSERT(!MarkerThreadId::CurrentThread().IsUnspecified()); + + MOZ_RELEASE_ASSERT(!MarkerThreadId{ + mozilla::baseprofiler::BaseProfilerThreadId::FromNumber(42)} + .IsUnspecified()); + MOZ_RELEASE_ASSERT( + MarkerThreadId{ + mozilla::baseprofiler::BaseProfilerThreadId::FromNumber(42)} + .ThreadId() + .ToNumber() == 42); + + // We'll assume that this test runs in the main thread (which should be true + // when called from the `main` function). + MOZ_RELEASE_ASSERT(MarkerThreadId::MainThread().ThreadId() == + mozilla::baseprofiler::profiler_main_thread_id()); + + MOZ_RELEASE_ASSERT(MarkerThreadId::CurrentThread().ThreadId() == + mozilla::baseprofiler::profiler_current_thread_id()); + + MOZ_RELEASE_ASSERT(MarkerThreadId::CurrentThread().ThreadId() == + mozilla::baseprofiler::profiler_main_thread_id()); + + std::thread testThread([]() { + MOZ_RELEASE_ASSERT(!MarkerThreadId::MainThread().IsUnspecified()); + MOZ_RELEASE_ASSERT(!MarkerThreadId::CurrentThread().IsUnspecified()); + + MOZ_RELEASE_ASSERT(MarkerThreadId::MainThread().ThreadId() == + mozilla::baseprofiler::profiler_main_thread_id()); + + MOZ_RELEASE_ASSERT(MarkerThreadId::CurrentThread().ThreadId() == + mozilla::baseprofiler::profiler_current_thread_id()); + + MOZ_RELEASE_ASSERT(MarkerThreadId::CurrentThread().ThreadId() != + mozilla::baseprofiler::profiler_main_thread_id()); + }); + testThread.join(); + + printf("TestMarkerThreadId done\n"); +} + +void TestMarkerNoPayload() { + printf("TestMarkerNoPayload...\n"); + + mozilla::ProfileBufferChunkManagerSingle chunkManager(512); + mozilla::ProfileChunkedBuffer buffer( + mozilla::ProfileChunkedBuffer::ThreadSafety::WithoutMutex, chunkManager); + + mozilla::ProfileBufferBlockIndex i0 = + mozilla::baseprofiler::AddMarkerToBuffer( + buffer, "literal", mozilla::baseprofiler::category::OTHER_Profiling); + MOZ_RELEASE_ASSERT(i0); + + const std::string dynamic = "dynamic"; + mozilla::ProfileBufferBlockIndex i1 = + mozilla::baseprofiler::AddMarkerToBuffer( + buffer, dynamic, + mozilla::baseprofiler::category::GRAPHICS_FlushingAsyncPaints, {}); + MOZ_RELEASE_ASSERT(i1); + MOZ_RELEASE_ASSERT(i1 > i0); + + mozilla::ProfileBufferBlockIndex i2 = + mozilla::baseprofiler::AddMarkerToBuffer( + buffer, std::string_view("string_view"), + mozilla::baseprofiler::category::GRAPHICS_FlushingAsyncPaints, {}); + MOZ_RELEASE_ASSERT(i2); + MOZ_RELEASE_ASSERT(i2 > i1); + +# ifdef DEBUG + buffer.Dump(); +# endif + + PrintMarkers(buffer); + + printf("TestMarkerNoPayload done\n"); +} + +void TestUserMarker() { + printf("TestUserMarker...\n"); + + // User-defined marker type with text. + // It's fine to define it right in the function where it's used. + struct MarkerTypeTestMinimal { + static constexpr Span<const char> MarkerTypeName() { + return MakeStringSpan("test-minimal"); + } + static void StreamJSONMarkerData( + mozilla::baseprofiler::SpliceableJSONWriter& aWriter, + const std::string& aText) { + aWriter.StringProperty("text", aText); + } + static mozilla::MarkerSchema MarkerTypeDisplay() { + using MS = mozilla::MarkerSchema; + MS schema{MS::Location::MarkerChart, MS::Location::MarkerTable}; + schema.SetTooltipLabel("tooltip for test-minimal"); + schema.AddKeyLabelFormatSearchable("text", "Text", MS::Format::String, + MS::Searchable::Searchable); + return schema; + } + }; + + mozilla::ProfileBufferChunkManagerSingle chunkManager(1024); + mozilla::ProfileChunkedBuffer buffer( + mozilla::ProfileChunkedBuffer::ThreadSafety::WithoutMutex, chunkManager); + + MOZ_RELEASE_ASSERT(mozilla::baseprofiler::AddMarkerToBuffer( + buffer, "test2", mozilla::baseprofiler::category::OTHER_Profiling, {}, + MarkerTypeTestMinimal{}, std::string("payload text"))); + + MOZ_RELEASE_ASSERT(mozilla::baseprofiler::AddMarkerToBuffer( + buffer, "test2", mozilla::baseprofiler::category::OTHER_Profiling, + mozilla::MarkerThreadId( + mozilla::baseprofiler::BaseProfilerThreadId::FromNumber(123)), + MarkerTypeTestMinimal{}, std::string("ThreadId(123)"))); + + auto start = mozilla::TimeStamp::Now(); + + MOZ_RELEASE_ASSERT(mozilla::baseprofiler::AddMarkerToBuffer( + buffer, "test2", mozilla::baseprofiler::category::OTHER_Profiling, + mozilla::MarkerTiming::InstantAt(start), MarkerTypeTestMinimal{}, + std::string("InstantAt(start)"))); + + auto then = mozilla::TimeStamp::Now(); + + MOZ_RELEASE_ASSERT(mozilla::baseprofiler::AddMarkerToBuffer( + buffer, "test2", mozilla::baseprofiler::category::OTHER_Profiling, + mozilla::MarkerTiming::IntervalStart(start), MarkerTypeTestMinimal{}, + std::string("IntervalStart(start)"))); + + MOZ_RELEASE_ASSERT(mozilla::baseprofiler::AddMarkerToBuffer( + buffer, "test2", mozilla::baseprofiler::category::OTHER_Profiling, + mozilla::MarkerTiming::IntervalEnd(then), MarkerTypeTestMinimal{}, + std::string("IntervalEnd(then)"))); + + MOZ_RELEASE_ASSERT(mozilla::baseprofiler::AddMarkerToBuffer( + buffer, "test2", mozilla::baseprofiler::category::OTHER_Profiling, + mozilla::MarkerTiming::Interval(start, then), MarkerTypeTestMinimal{}, + std::string("Interval(start, then)"))); + + MOZ_RELEASE_ASSERT(mozilla::baseprofiler::AddMarkerToBuffer( + buffer, "test2", mozilla::baseprofiler::category::OTHER_Profiling, + mozilla::MarkerTiming::IntervalUntilNowFrom(start), + MarkerTypeTestMinimal{}, std::string("IntervalUntilNowFrom(start)"))); + + MOZ_RELEASE_ASSERT(mozilla::baseprofiler::AddMarkerToBuffer( + buffer, "test2", mozilla::baseprofiler::category::OTHER_Profiling, + mozilla::MarkerStack::NoStack(), MarkerTypeTestMinimal{}, + std::string("NoStack"))); + // Note: We cannot test stack-capture here, because the profiler is not + // initialized. + + MOZ_RELEASE_ASSERT(mozilla::baseprofiler::AddMarkerToBuffer( + buffer, "test2", mozilla::baseprofiler::category::OTHER_Profiling, + mozilla::MarkerInnerWindowId(123), MarkerTypeTestMinimal{}, + std::string("InnerWindowId(123)"))); + +# ifdef DEBUG + buffer.Dump(); +# endif + + PrintMarkers(buffer); + + printf("TestUserMarker done\n"); +} + +void TestPredefinedMarkers() { + printf("TestPredefinedMarkers...\n"); + + mozilla::ProfileBufferChunkManagerSingle chunkManager(1024); + mozilla::ProfileChunkedBuffer buffer( + mozilla::ProfileChunkedBuffer::ThreadSafety::WithoutMutex, chunkManager); + + MOZ_RELEASE_ASSERT(mozilla::baseprofiler::AddMarkerToBuffer( + buffer, std::string_view("tracing"), + mozilla::baseprofiler::category::OTHER, {}, + mozilla::baseprofiler::markers::Tracing{}, "category")); + + MOZ_RELEASE_ASSERT(mozilla::baseprofiler::AddMarkerToBuffer( + buffer, std::string_view("text"), mozilla::baseprofiler::category::OTHER, + {}, mozilla::baseprofiler::markers::TextMarker{}, "text text")); + + MOZ_RELEASE_ASSERT(mozilla::baseprofiler::AddMarkerToBuffer( + buffer, std::string_view("media"), mozilla::baseprofiler::category::OTHER, + {}, mozilla::baseprofiler::markers::MediaSampleMarker{}, 123, 456, 789)); + + MOZ_RELEASE_ASSERT(mozilla::baseprofiler::AddMarkerToBuffer( + buffer, std::string_view("media"), mozilla::baseprofiler::category::OTHER, + {}, mozilla::baseprofiler::markers::VideoFallingBehindMarker{}, 123, + 456)); + +# ifdef DEBUG + buffer.Dump(); +# endif + + PrintMarkers(buffer); + + printf("TestPredefinedMarkers done\n"); +} + +void TestProfilerMarkers() { + printf( + "TestProfilerMarkers -- pid: %" PRIu64 ", tid: %" PRIu64 "\n", + uint64_t(mozilla::baseprofiler::profiler_current_process_id().ToNumber()), + uint64_t(mozilla::baseprofiler::profiler_current_thread_id().ToNumber())); + // ::SleepMilli(10000); + + TestUniqueJSONStrings(); + TestMarkerCategory(); + TestMarkerThreadId(); + TestMarkerNoPayload(); + TestUserMarker(); + TestPredefinedMarkers(); + + printf("TestProfilerMarkers done\n"); +} + +#else // MOZ_GECKO_PROFILER + +// Testing that macros are still #defined (but do nothing) when +// MOZ_GECKO_PROFILER is disabled. +void TestProfiler() { + // These don't need to make sense, we just want to know that they're defined + // and don't do anything. + +# ifndef AUTO_BASE_PROFILER_INIT +# error AUTO_BASE_PROFILER_INIT not #defined +# endif // AUTO_BASE_PROFILER_INIT + AUTO_BASE_PROFILER_INIT; + +# ifndef AUTO_BASE_PROFILER_MARKER_TEXT +# error AUTO_BASE_PROFILER_MARKER_TEXT not #defined +# endif // AUTO_BASE_PROFILER_MARKER_TEXT + +# ifndef AUTO_BASE_PROFILER_LABEL +# error AUTO_BASE_PROFILER_LABEL not #defined +# endif // AUTO_BASE_PROFILER_LABEL + +# ifndef AUTO_BASE_PROFILER_THREAD_SLEEP +# error AUTO_BASE_PROFILER_THREAD_SLEEP not #defined +# endif // AUTO_BASE_PROFILER_THREAD_SLEEP + AUTO_BASE_PROFILER_THREAD_SLEEP; + +# ifndef BASE_PROFILER_MARKER_UNTYPED +# error BASE_PROFILER_MARKER_UNTYPED not #defined +# endif // BASE_PROFILER_MARKER_UNTYPED + +# ifndef BASE_PROFILER_MARKER +# error BASE_PROFILER_MARKER not #defined +# endif // BASE_PROFILER_MARKER + +# ifndef BASE_PROFILER_MARKER_TEXT +# error BASE_PROFILER_MARKER_TEXT not #defined +# endif // BASE_PROFILER_MARKER_TEXT + + MOZ_RELEASE_ASSERT(!mozilla::baseprofiler::profiler_get_backtrace(), + "profiler_get_backtrace should return nullptr"); + mozilla::ProfileChunkedBuffer buffer( + mozilla::ProfileChunkedBuffer::ThreadSafety::WithoutMutex); + MOZ_RELEASE_ASSERT(!mozilla::baseprofiler::profiler_capture_backtrace_into( + buffer, mozilla::StackCaptureOptions::Full), + "profiler_capture_backtrace_into should return false"); + MOZ_RELEASE_ASSERT(!mozilla::baseprofiler::profiler_capture_backtrace(), + "profiler_capture_backtrace should return nullptr"); +} + +// Testing that macros are still #defined (but do nothing) when +// MOZ_GECKO_PROFILER is disabled. +void TestProfilerMarkers() { + // These don't need to make sense, we just want to know that they're defined + // and don't do anything. +} + +#endif // MOZ_GECKO_PROFILER else + +#if defined(XP_WIN) +int wmain() +#else +int main() +#endif // defined(XP_WIN) +{ +#ifdef MOZ_GECKO_PROFILER + printf("BaseTestProfiler -- pid: %" PRIu64 ", tid: %" PRIu64 "\n", + uint64_t(baseprofiler::profiler_current_process_id().ToNumber()), + uint64_t(baseprofiler::profiler_current_thread_id().ToNumber())); + // ::SleepMilli(10000); +#endif // MOZ_GECKO_PROFILER + + TestFailureLatch(); + TestProfilerUtils(); + TestBaseAndProfilerDetail(); + TestSharedMutex(); + TestProportionValue(); + TestProgressLogger(); + // Note that there are two `TestProfiler{,Markers}` functions above, depending + // on whether MOZ_GECKO_PROFILER is #defined. + { + printf("profiler_init()...\n"); + AUTO_BASE_PROFILER_INIT; + + TestProfiler(); + TestProfilerMarkers(); + } + + return 0; +} |