From 0ebf5bdf043a27fd3dfb7f92e0cb63d88954c44d Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Fri, 19 Apr 2024 03:47:29 +0200 Subject: Adding upstream version 115.8.0esr. Signed-off-by: Daniel Baumann --- image/encoders/jpeg/nsJPEGEncoder.cpp | 519 ++++++++++++++++++++++++++++++++++ 1 file changed, 519 insertions(+) create mode 100644 image/encoders/jpeg/nsJPEGEncoder.cpp (limited to 'image/encoders/jpeg/nsJPEGEncoder.cpp') diff --git a/image/encoders/jpeg/nsJPEGEncoder.cpp b/image/encoders/jpeg/nsJPEGEncoder.cpp new file mode 100644 index 0000000000..2975532b58 --- /dev/null +++ b/image/encoders/jpeg/nsJPEGEncoder.cpp @@ -0,0 +1,519 @@ +/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. */ + +#include "nsJPEGEncoder.h" +#include "prprf.h" +#include "nsString.h" +#include "nsStreamUtils.h" +#include "gfxColor.h" +#include "mozilla/CheckedInt.h" +#include "mozilla/UniquePtrExtensions.h" + +extern "C" { +#include "jpeglib.h" +} + +#include +#include "jerror.h" + +using namespace mozilla; + +NS_IMPL_ISUPPORTS(nsJPEGEncoder, imgIEncoder, nsIInputStream, + nsIAsyncInputStream) + +class nsJPEGEncoderInternal { + friend class nsJPEGEncoder; + + protected: + /** + * Initialize destination. This is called by jpeg_start_compress() before + * any data is actually written. It must initialize next_output_byte and + * free_in_buffer. free_in_buffer must be initialized to a positive value. + */ + static void initDestination(jpeg_compress_struct* cinfo); + + /** + * This is called whenever the buffer has filled (free_in_buffer reaches + * zero). In typical applications, it should write out the *entire* buffer + * (use the saved start address and buffer length; ignore the current state + * of next_output_byte and free_in_buffer). Then reset the pointer & count + * to the start of the buffer, and return TRUE indicating that the buffer + * has been dumped. free_in_buffer must be set to a positive value when + * TRUE is returned. A FALSE return should only be used when I/O suspension + * is desired (this operating mode is discussed in the next section). + */ + static boolean emptyOutputBuffer(jpeg_compress_struct* cinfo); + + /** + * Terminate destination --- called by jpeg_finish_compress() after all data + * has been written. In most applications, this must flush any data + * remaining in the buffer. Use either next_output_byte or free_in_buffer + * to determine how much data is in the buffer. + */ + static void termDestination(jpeg_compress_struct* cinfo); + + /** + * Override the standard error method in the IJG JPEG decoder code. This + * was mostly copied from nsJPEGDecoder.cpp + */ + static void errorExit(jpeg_common_struct* cinfo); +}; + +// used to pass error info through the JPEG library +struct encoder_error_mgr { + jpeg_error_mgr pub; + jmp_buf setjmp_buffer; +}; + +nsJPEGEncoder::nsJPEGEncoder() + : mFinished(false), + mImageBuffer(nullptr), + mImageBufferSize(0), + mImageBufferUsed(0), + mImageBufferReadPoint(0), + mCallback(nullptr), + mCallbackTarget(nullptr), + mNotifyThreshold(0), + mReentrantMonitor("nsJPEGEncoder.mReentrantMonitor") {} + +nsJPEGEncoder::~nsJPEGEncoder() { + if (mImageBuffer) { + free(mImageBuffer); + mImageBuffer = nullptr; + } +} + +// nsJPEGEncoder::InitFromData +// +// One output option is supported: "quality=X" where X is an integer in the +// range 0-100. Higher values for X give better quality. +// +// Transparency is always discarded. + +NS_IMETHODIMP +nsJPEGEncoder::InitFromData(const uint8_t* aData, + uint32_t aLength, // (unused, req'd by JS) + uint32_t aWidth, uint32_t aHeight, uint32_t aStride, + uint32_t aInputFormat, + const nsAString& aOutputOptions) { + NS_ENSURE_ARG(aData); + + // validate input format + if (aInputFormat != INPUT_FORMAT_RGB && aInputFormat != INPUT_FORMAT_RGBA && + aInputFormat != INPUT_FORMAT_HOSTARGB) + return NS_ERROR_INVALID_ARG; + + // Stride is the padded width of each row, so it better be longer (I'm afraid + // people will not understand what stride means, so check it well) + if ((aInputFormat == INPUT_FORMAT_RGB && aStride < aWidth * 3) || + ((aInputFormat == INPUT_FORMAT_RGBA || + aInputFormat == INPUT_FORMAT_HOSTARGB) && + aStride < aWidth * 4)) { + NS_WARNING("Invalid stride for InitFromData"); + return NS_ERROR_INVALID_ARG; + } + + // can't initialize more than once + if (mImageBuffer != nullptr) { + return NS_ERROR_ALREADY_INITIALIZED; + } + + // options: we only have one option so this is easy + int quality = 92; + if (aOutputOptions.Length() > 0) { + // have options string + const nsString qualityPrefix(u"quality="_ns); + if (aOutputOptions.Length() > qualityPrefix.Length() && + StringBeginsWith(aOutputOptions, qualityPrefix)) { + // have quality string + nsCString value = NS_ConvertUTF16toUTF8( + Substring(aOutputOptions, qualityPrefix.Length())); + int newquality = -1; + if (PR_sscanf(value.get(), "%d", &newquality) == 1) { + if (newquality >= 0 && newquality <= 100) { + quality = newquality; + } else { + NS_WARNING( + "Quality value out of range, should be 0-100," + " using default"); + } + } else { + NS_WARNING( + "Quality value invalid, should be integer 0-100," + " using default"); + } + } else { + return NS_ERROR_INVALID_ARG; + } + } + + UniquePtr rowptr; + if (aInputFormat == INPUT_FORMAT_RGBA || + aInputFormat == INPUT_FORMAT_HOSTARGB) { + rowptr = MakeUniqueFallible(aWidth * 3); + if (NS_WARN_IF(!rowptr)) { + return NS_ERROR_OUT_OF_MEMORY; + } + } + + jpeg_compress_struct cinfo; + + // We set up the normal JPEG error routines, then override error_exit. + // This must be done before the call to create_compress + encoder_error_mgr errmgr; + cinfo.err = jpeg_std_error(&errmgr.pub); + errmgr.pub.error_exit = nsJPEGEncoderInternal::errorExit; + // Establish the setjmp return context for my_error_exit to use. + if (setjmp(errmgr.setjmp_buffer)) { + // If we get here, the JPEG code has signaled an error. + // We need to clean up the JPEG object, close the input file, and return. + return NS_ERROR_FAILURE; + } + + jpeg_create_compress(&cinfo); + cinfo.image_width = aWidth; + cinfo.image_height = aHeight; + cinfo.input_components = 3; + cinfo.in_color_space = JCS_RGB; + cinfo.data_precision = 8; + + jpeg_set_defaults(&cinfo); + jpeg_set_quality(&cinfo, quality, 1); // quality here is 0-100 + if (quality >= 90) { + int i; + for (i = 0; i < MAX_COMPONENTS; i++) { + cinfo.comp_info[i].h_samp_factor = 1; + cinfo.comp_info[i].v_samp_factor = 1; + } + } + + // set up the destination manager + jpeg_destination_mgr destmgr; + destmgr.init_destination = nsJPEGEncoderInternal::initDestination; + destmgr.empty_output_buffer = nsJPEGEncoderInternal::emptyOutputBuffer; + destmgr.term_destination = nsJPEGEncoderInternal::termDestination; + cinfo.dest = &destmgr; + cinfo.client_data = this; + + jpeg_start_compress(&cinfo, 1); + + // feed it the rows + if (aInputFormat == INPUT_FORMAT_RGB) { + while (cinfo.next_scanline < cinfo.image_height) { + const uint8_t* row = &aData[cinfo.next_scanline * aStride]; + jpeg_write_scanlines(&cinfo, const_cast(&row), 1); + } + } else if (aInputFormat == INPUT_FORMAT_RGBA) { + MOZ_ASSERT(rowptr); + uint8_t* row = rowptr.get(); + while (cinfo.next_scanline < cinfo.image_height) { + ConvertRGBARow(&aData[cinfo.next_scanline * aStride], row, aWidth); + jpeg_write_scanlines(&cinfo, &row, 1); + } + } else if (aInputFormat == INPUT_FORMAT_HOSTARGB) { + MOZ_ASSERT(rowptr); + uint8_t* row = rowptr.get(); + while (cinfo.next_scanline < cinfo.image_height) { + ConvertHostARGBRow(&aData[cinfo.next_scanline * aStride], row, aWidth); + jpeg_write_scanlines(&cinfo, &row, 1); + } + } + + jpeg_finish_compress(&cinfo); + jpeg_destroy_compress(&cinfo); + + mFinished = true; + NotifyListener(); + + // if output callback can't get enough memory, it will free our buffer + if (!mImageBuffer) { + return NS_ERROR_OUT_OF_MEMORY; + } + + return NS_OK; +} + +NS_IMETHODIMP +nsJPEGEncoder::StartImageEncode(uint32_t aWidth, uint32_t aHeight, + uint32_t aInputFormat, + const nsAString& aOutputOptions) { + return NS_ERROR_NOT_IMPLEMENTED; +} + +// Returns the number of bytes in the image buffer used. +NS_IMETHODIMP +nsJPEGEncoder::GetImageBufferUsed(uint32_t* aOutputSize) { + NS_ENSURE_ARG_POINTER(aOutputSize); + *aOutputSize = mImageBufferUsed; + return NS_OK; +} + +// Returns a pointer to the start of the image buffer +NS_IMETHODIMP +nsJPEGEncoder::GetImageBuffer(char** aOutputBuffer) { + NS_ENSURE_ARG_POINTER(aOutputBuffer); + *aOutputBuffer = reinterpret_cast(mImageBuffer); + return NS_OK; +} + +NS_IMETHODIMP +nsJPEGEncoder::AddImageFrame(const uint8_t* aData, uint32_t aLength, + uint32_t aWidth, uint32_t aHeight, + uint32_t aStride, uint32_t aFrameFormat, + const nsAString& aFrameOptions) { + return NS_ERROR_NOT_IMPLEMENTED; +} + +NS_IMETHODIMP +nsJPEGEncoder::EndImageEncode() { return NS_ERROR_NOT_IMPLEMENTED; } + +NS_IMETHODIMP +nsJPEGEncoder::Close() { + if (mImageBuffer != nullptr) { + free(mImageBuffer); + mImageBuffer = nullptr; + mImageBufferSize = 0; + mImageBufferUsed = 0; + mImageBufferReadPoint = 0; + } + return NS_OK; +} + +NS_IMETHODIMP +nsJPEGEncoder::Available(uint64_t* _retval) { + if (!mImageBuffer) { + return NS_BASE_STREAM_CLOSED; + } + + *_retval = mImageBufferUsed - mImageBufferReadPoint; + return NS_OK; +} + +NS_IMETHODIMP +nsJPEGEncoder::StreamStatus() { + return mImageBuffer ? NS_OK : NS_BASE_STREAM_CLOSED; +} + +NS_IMETHODIMP +nsJPEGEncoder::Read(char* aBuf, uint32_t aCount, uint32_t* _retval) { + return ReadSegments(NS_CopySegmentToBuffer, aBuf, aCount, _retval); +} + +NS_IMETHODIMP +nsJPEGEncoder::ReadSegments(nsWriteSegmentFun aWriter, void* aClosure, + uint32_t aCount, uint32_t* _retval) { + // Avoid another thread reallocing the buffer underneath us + ReentrantMonitorAutoEnter autoEnter(mReentrantMonitor); + + uint32_t maxCount = mImageBufferUsed - mImageBufferReadPoint; + if (maxCount == 0) { + *_retval = 0; + return mFinished ? NS_OK : NS_BASE_STREAM_WOULD_BLOCK; + } + + if (aCount > maxCount) { + aCount = maxCount; + } + nsresult rv = aWriter( + this, aClosure, + reinterpret_cast(mImageBuffer + mImageBufferReadPoint), 0, + aCount, _retval); + if (NS_SUCCEEDED(rv)) { + NS_ASSERTION(*_retval <= aCount, "bad write count"); + mImageBufferReadPoint += *_retval; + } + + // errors returned from the writer end here! + return NS_OK; +} + +NS_IMETHODIMP +nsJPEGEncoder::IsNonBlocking(bool* _retval) { + *_retval = true; + return NS_OK; +} + +NS_IMETHODIMP +nsJPEGEncoder::AsyncWait(nsIInputStreamCallback* aCallback, uint32_t aFlags, + uint32_t aRequestedCount, nsIEventTarget* aTarget) { + if (aFlags != 0) { + return NS_ERROR_NOT_IMPLEMENTED; + } + + if (mCallback || mCallbackTarget) { + return NS_ERROR_UNEXPECTED; + } + + mCallbackTarget = aTarget; + // 0 means "any number of bytes except 0" + mNotifyThreshold = aRequestedCount; + if (!aRequestedCount) { + mNotifyThreshold = 1024; // 1 KB seems good. We don't want to + // notify incessantly + } + + // We set the callback absolutely last, because NotifyListener uses it to + // determine if someone needs to be notified. If we don't set it last, + // NotifyListener might try to fire off a notification to a null target + // which will generally cause non-threadsafe objects to be used off the + // main thread + mCallback = aCallback; + + // What we are being asked for may be present already + NotifyListener(); + return NS_OK; +} + +NS_IMETHODIMP +nsJPEGEncoder::CloseWithStatus(nsresult aStatus) { return Close(); } + +// nsJPEGEncoder::ConvertHostARGBRow +// +// Our colors are stored with premultiplied alphas, but we need +// an output with no alpha in machine-independent byte order. +// +// See gfx/cairo/cairo/src/cairo-png.c +void nsJPEGEncoder::ConvertHostARGBRow(const uint8_t* aSrc, uint8_t* aDest, + uint32_t aPixelWidth) { + for (uint32_t x = 0; x < aPixelWidth; x++) { + const uint32_t& pixelIn = ((const uint32_t*)(aSrc))[x]; + uint8_t* pixelOut = &aDest[x * 3]; + + pixelOut[0] = (pixelIn & 0xff0000) >> 16; + pixelOut[1] = (pixelIn & 0x00ff00) >> 8; + pixelOut[2] = (pixelIn & 0x0000ff) >> 0; + } +} + +/** + * nsJPEGEncoder::ConvertRGBARow + * + * Input is RGBA, output is RGB, so we should alpha-premultiply. + */ +void nsJPEGEncoder::ConvertRGBARow(const uint8_t* aSrc, uint8_t* aDest, + uint32_t aPixelWidth) { + for (uint32_t x = 0; x < aPixelWidth; x++) { + const uint8_t* pixelIn = &aSrc[x * 4]; + uint8_t* pixelOut = &aDest[x * 3]; + + uint8_t alpha = pixelIn[3]; + pixelOut[0] = gfxPreMultiply(pixelIn[0], alpha); + pixelOut[1] = gfxPreMultiply(pixelIn[1], alpha); + pixelOut[2] = gfxPreMultiply(pixelIn[2], alpha); + } +} + +void nsJPEGEncoder::NotifyListener() { + // We might call this function on multiple threads (any threads that call + // AsyncWait and any that do encoding) so we lock to avoid notifying the + // listener twice about the same data (which generally leads to a truncated + // image). + ReentrantMonitorAutoEnter autoEnter(mReentrantMonitor); + + if (mCallback && + (mImageBufferUsed - mImageBufferReadPoint >= mNotifyThreshold || + mFinished)) { + nsCOMPtr callback; + if (mCallbackTarget) { + callback = NS_NewInputStreamReadyEvent("nsJPEGEncoder::NotifyListener", + mCallback, mCallbackTarget); + } else { + callback = mCallback; + } + + NS_ASSERTION(callback, "Shouldn't fail to make the callback"); + // Null the callback first because OnInputStreamReady could reenter + // AsyncWait + mCallback = nullptr; + mCallbackTarget = nullptr; + mNotifyThreshold = 0; + + callback->OnInputStreamReady(this); + } +} + +/* static */ +void nsJPEGEncoderInternal::initDestination(jpeg_compress_struct* cinfo) { + nsJPEGEncoder* that = static_cast(cinfo->client_data); + NS_ASSERTION(!that->mImageBuffer, "Image buffer already initialized"); + + that->mImageBufferSize = 8192; + that->mImageBuffer = (uint8_t*)malloc(that->mImageBufferSize); + that->mImageBufferUsed = 0; + + cinfo->dest->next_output_byte = that->mImageBuffer; + cinfo->dest->free_in_buffer = that->mImageBufferSize; +} + +/* static */ +boolean nsJPEGEncoderInternal::emptyOutputBuffer(jpeg_compress_struct* cinfo) { + nsJPEGEncoder* that = static_cast(cinfo->client_data); + NS_ASSERTION(that->mImageBuffer, "No buffer to empty!"); + + // When we're reallocing the buffer we need to take the lock to ensure + // that nobody is trying to read from the buffer we are destroying + ReentrantMonitorAutoEnter autoEnter(that->mReentrantMonitor); + + that->mImageBufferUsed = that->mImageBufferSize; + + // expand buffer, just double size each time + uint8_t* newBuf = nullptr; + CheckedInt bufSize = + CheckedInt(that->mImageBufferSize) * 2; + if (bufSize.isValid()) { + that->mImageBufferSize = bufSize.value(); + newBuf = (uint8_t*)realloc(that->mImageBuffer, that->mImageBufferSize); + } + + if (!newBuf) { + // can't resize, just zero (this will keep us from writing more) + free(that->mImageBuffer); + that->mImageBuffer = nullptr; + that->mImageBufferSize = 0; + that->mImageBufferUsed = 0; + + // This seems to be the only way to do errors through the JPEG library. We + // pass an nsresult masquerading as an int, which works because the + // setjmp() caller casts it back. + longjmp(((encoder_error_mgr*)(cinfo->err))->setjmp_buffer, + static_cast(NS_ERROR_OUT_OF_MEMORY)); + } + that->mImageBuffer = newBuf; + + cinfo->dest->next_output_byte = &that->mImageBuffer[that->mImageBufferUsed]; + cinfo->dest->free_in_buffer = that->mImageBufferSize - that->mImageBufferUsed; + return 1; +} + +/* static */ +void nsJPEGEncoderInternal::termDestination(jpeg_compress_struct* cinfo) { + nsJPEGEncoder* that = static_cast(cinfo->client_data); + if (!that->mImageBuffer) { + return; + } + that->mImageBufferUsed = cinfo->dest->next_output_byte - that->mImageBuffer; + NS_ASSERTION(that->mImageBufferUsed < that->mImageBufferSize, + "JPEG library busted, got a bad image buffer size"); + that->NotifyListener(); +} + +/* static */ +void nsJPEGEncoderInternal::errorExit(jpeg_common_struct* cinfo) { + nsresult error_code; + encoder_error_mgr* err = (encoder_error_mgr*)cinfo->err; + + // Convert error to a browser error code + switch (cinfo->err->msg_code) { + case JERR_OUT_OF_MEMORY: + error_code = NS_ERROR_OUT_OF_MEMORY; + break; + default: + error_code = NS_ERROR_FAILURE; + } + + // Return control to the setjmp point. We pass an nsresult masquerading as + // an int, which works because the setjmp() caller casts it back. + longjmp(err->setjmp_buffer, static_cast(error_code)); +} -- cgit v1.2.3