From 0ebf5bdf043a27fd3dfb7f92e0cb63d88954c44d Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Fri, 19 Apr 2024 03:47:29 +0200 Subject: Adding upstream version 115.8.0esr. Signed-off-by: Daniel Baumann --- third_party/rust/lmdb-rkv-sys/src/bindings.rs | 1396 +++++++++++++++++++++++++ third_party/rust/lmdb-rkv-sys/src/lib.rs | 22 + 2 files changed, 1418 insertions(+) create mode 100644 third_party/rust/lmdb-rkv-sys/src/bindings.rs create mode 100644 third_party/rust/lmdb-rkv-sys/src/lib.rs (limited to 'third_party/rust/lmdb-rkv-sys/src') diff --git a/third_party/rust/lmdb-rkv-sys/src/bindings.rs b/third_party/rust/lmdb-rkv-sys/src/bindings.rs new file mode 100644 index 0000000000..50d1e1e218 --- /dev/null +++ b/third_party/rust/lmdb-rkv-sys/src/bindings.rs @@ -0,0 +1,1396 @@ +/* automatically generated by rust-bindgen */ + +pub const MDB_VERSION_MAJOR: ::libc::c_uint = 0; +pub const MDB_VERSION_MINOR: ::libc::c_uint = 9; +pub const MDB_VERSION_PATCH: ::libc::c_uint = 24; +pub const MDB_VERSION_DATE: &'static [u8; 14usize] = b"July 24, 2019\0"; +pub const MDB_FIXEDMAP: ::libc::c_uint = 1; +pub const MDB_NOSUBDIR: ::libc::c_uint = 16384; +pub const MDB_NOSYNC: ::libc::c_uint = 65536; +pub const MDB_RDONLY: ::libc::c_uint = 131072; +pub const MDB_NOMETASYNC: ::libc::c_uint = 262144; +pub const MDB_WRITEMAP: ::libc::c_uint = 524288; +pub const MDB_MAPASYNC: ::libc::c_uint = 1048576; +pub const MDB_NOTLS: ::libc::c_uint = 2097152; +pub const MDB_NOLOCK: ::libc::c_uint = 4194304; +pub const MDB_NORDAHEAD: ::libc::c_uint = 8388608; +pub const MDB_NOMEMINIT: ::libc::c_uint = 16777216; +pub const MDB_REVERSEKEY: ::libc::c_uint = 2; +pub const MDB_DUPSORT: ::libc::c_uint = 4; +pub const MDB_INTEGERKEY: ::libc::c_uint = 8; +pub const MDB_DUPFIXED: ::libc::c_uint = 16; +pub const MDB_INTEGERDUP: ::libc::c_uint = 32; +pub const MDB_REVERSEDUP: ::libc::c_uint = 64; +pub const MDB_CREATE: ::libc::c_uint = 262144; +pub const MDB_NOOVERWRITE: ::libc::c_uint = 16; +pub const MDB_NODUPDATA: ::libc::c_uint = 32; +pub const MDB_CURRENT: ::libc::c_uint = 64; +pub const MDB_RESERVE: ::libc::c_uint = 65536; +pub const MDB_APPEND: ::libc::c_uint = 131072; +pub const MDB_APPENDDUP: ::libc::c_uint = 262144; +pub const MDB_MULTIPLE: ::libc::c_uint = 524288; +pub const MDB_CP_COMPACT: ::libc::c_uint = 1; +pub const MDB_SUCCESS: ::libc::c_int = 0; +pub const MDB_KEYEXIST: ::libc::c_int = -30799; +pub const MDB_NOTFOUND: ::libc::c_int = -30798; +pub const MDB_PAGE_NOTFOUND: ::libc::c_int = -30797; +pub const MDB_CORRUPTED: ::libc::c_int = -30796; +pub const MDB_PANIC: ::libc::c_int = -30795; +pub const MDB_VERSION_MISMATCH: ::libc::c_int = -30794; +pub const MDB_INVALID: ::libc::c_int = -30793; +pub const MDB_MAP_FULL: ::libc::c_int = -30792; +pub const MDB_DBS_FULL: ::libc::c_int = -30791; +pub const MDB_READERS_FULL: ::libc::c_int = -30790; +pub const MDB_TLS_FULL: ::libc::c_int = -30789; +pub const MDB_TXN_FULL: ::libc::c_int = -30788; +pub const MDB_CURSOR_FULL: ::libc::c_int = -30787; +pub const MDB_PAGE_FULL: ::libc::c_int = -30786; +pub const MDB_MAP_RESIZED: ::libc::c_int = -30785; +pub const MDB_INCOMPATIBLE: ::libc::c_int = -30784; +pub const MDB_BAD_RSLOT: ::libc::c_int = -30783; +pub const MDB_BAD_TXN: ::libc::c_int = -30782; +pub const MDB_BAD_VALSIZE: ::libc::c_int = -30781; +pub const MDB_BAD_DBI: ::libc::c_int = -30780; +pub const MDB_LAST_ERRCODE: ::libc::c_int = -30780; +#[repr(C)] +#[derive(Debug, Copy, Clone)] +pub struct MDB_env { + _unused: [u8; 0], +} +#[repr(C)] +#[derive(Debug, Copy, Clone)] +pub struct MDB_txn { + _unused: [u8; 0], +} +#[doc = " @brief A handle for an individual database in the DB environment."] +pub type MDB_dbi = ::libc::c_uint; +#[repr(C)] +#[derive(Debug, Copy, Clone)] +pub struct MDB_cursor { + _unused: [u8; 0], +} +#[doc = " @brief Generic structure used for passing keys and data in and out"] +#[doc = " of the database."] +#[doc = ""] +#[doc = " Values returned from the database are valid only until a subsequent"] +#[doc = " update operation, or the end of the transaction. Do not modify or"] +#[doc = " free them, they commonly point into the database itself."] +#[doc = ""] +#[doc = " Key sizes must be between 1 and #mdb_env_get_maxkeysize() inclusive."] +#[doc = " The same applies to data sizes in databases with the #MDB_DUPSORT flag."] +#[doc = " Other data items can in theory be from 0 to 0xffffffff bytes long."] +#[repr(C)] +#[derive(Debug, Copy, Clone)] +pub struct MDB_val { + #[doc = "< size of the data item"] + pub mv_size: usize, + #[doc = "< address of the data item"] + pub mv_data: *mut ::libc::c_void, +} +#[doc = " @brief A callback function used to compare two keys in a database"] +pub type MDB_cmp_func = ::std::option::Option< + unsafe extern "C" fn(a: *const MDB_val, b: *const MDB_val) -> ::libc::c_int, +>; +#[doc = " @brief A callback function used to relocate a position-dependent data item"] +#[doc = " in a fixed-address database."] +#[doc = ""] +#[doc = " The \\b newptr gives the item's desired address in"] +#[doc = " the memory map, and \\b oldptr gives its previous address. The item's actual"] +#[doc = " data resides at the address in \\b item. This callback is expected to walk"] +#[doc = " through the fields of the record in \\b item and modify any"] +#[doc = " values based at the \\b oldptr address to be relative to the \\b newptr address."] +#[doc = " @param[in,out] item The item that is to be relocated."] +#[doc = " @param[in] oldptr The previous address."] +#[doc = " @param[in] newptr The new address to relocate to."] +#[doc = " @param[in] relctx An application-provided context, set by #mdb_set_relctx()."] +#[doc = " @todo This feature is currently unimplemented."] +pub type MDB_rel_func = ::std::option::Option< + unsafe extern "C" fn( + item: *mut MDB_val, + oldptr: *mut ::libc::c_void, + newptr: *mut ::libc::c_void, + relctx: *mut ::libc::c_void, + ), +>; +#[doc = "< Position at first key/data item"] +pub const MDB_FIRST: MDB_cursor_op = 0; +#[doc = "< Position at first data item of current key."] +#[doc = "Only for #MDB_DUPSORT"] +pub const MDB_FIRST_DUP: MDB_cursor_op = 1; +#[doc = "< Position at key/data pair. Only for #MDB_DUPSORT"] +pub const MDB_GET_BOTH: MDB_cursor_op = 2; +#[doc = "< position at key, nearest data. Only for #MDB_DUPSORT"] +pub const MDB_GET_BOTH_RANGE: MDB_cursor_op = 3; +#[doc = "< Return key/data at current cursor position"] +pub const MDB_GET_CURRENT: MDB_cursor_op = 4; +#[doc = "< Return up to a page of duplicate data items"] +#[doc = "from current cursor position. Move cursor to prepare"] +#[doc = "for #MDB_NEXT_MULTIPLE. Only for #MDB_DUPFIXED"] +pub const MDB_GET_MULTIPLE: MDB_cursor_op = 5; +#[doc = "< Position at last key/data item"] +pub const MDB_LAST: MDB_cursor_op = 6; +#[doc = "< Position at last data item of current key."] +#[doc = "Only for #MDB_DUPSORT"] +pub const MDB_LAST_DUP: MDB_cursor_op = 7; +#[doc = "< Position at next data item"] +pub const MDB_NEXT: MDB_cursor_op = 8; +#[doc = "< Position at next data item of current key."] +#[doc = "Only for #MDB_DUPSORT"] +pub const MDB_NEXT_DUP: MDB_cursor_op = 9; +#[doc = "< Return up to a page of duplicate data items"] +#[doc = "from next cursor position. Move cursor to prepare"] +#[doc = "for #MDB_NEXT_MULTIPLE. Only for #MDB_DUPFIXED"] +pub const MDB_NEXT_MULTIPLE: MDB_cursor_op = 10; +#[doc = "< Position at first data item of next key"] +pub const MDB_NEXT_NODUP: MDB_cursor_op = 11; +#[doc = "< Position at previous data item"] +pub const MDB_PREV: MDB_cursor_op = 12; +#[doc = "< Position at previous data item of current key."] +#[doc = "Only for #MDB_DUPSORT"] +pub const MDB_PREV_DUP: MDB_cursor_op = 13; +#[doc = "< Position at last data item of previous key"] +pub const MDB_PREV_NODUP: MDB_cursor_op = 14; +#[doc = "< Position at specified key"] +pub const MDB_SET: MDB_cursor_op = 15; +#[doc = "< Position at specified key, return key + data"] +pub const MDB_SET_KEY: MDB_cursor_op = 16; +#[doc = "< Position at first key greater than or equal to specified key."] +pub const MDB_SET_RANGE: MDB_cursor_op = 17; +#[doc = "< Position at previous page and return up to"] +#[doc = "a page of duplicate data items. Only for #MDB_DUPFIXED"] +pub const MDB_PREV_MULTIPLE: MDB_cursor_op = 18; +#[doc = " @brief Cursor Get operations."] +#[doc = ""] +#[doc = "\tThis is the set of all operations for retrieving data"] +#[doc = "\tusing a cursor."] +pub type MDB_cursor_op = u32; +#[doc = " @brief Statistics for a database in the environment"] +#[repr(C)] +#[derive(Debug, Copy, Clone)] +pub struct MDB_stat { + #[doc = "< Size of a database page."] + #[doc = "This is currently the same for all databases."] + pub ms_psize: ::libc::c_uint, + #[doc = "< Depth (height) of the B-tree"] + pub ms_depth: ::libc::c_uint, + #[doc = "< Number of internal (non-leaf) pages"] + pub ms_branch_pages: usize, + #[doc = "< Number of leaf pages"] + pub ms_leaf_pages: usize, + #[doc = "< Number of overflow pages"] + pub ms_overflow_pages: usize, + #[doc = "< Number of data items"] + pub ms_entries: usize, +} +#[doc = " @brief Information about the environment"] +#[repr(C)] +#[derive(Debug, Copy, Clone)] +pub struct MDB_envinfo { + #[doc = "< Address of map, if fixed"] + pub me_mapaddr: *mut ::libc::c_void, + #[doc = "< Size of the data memory map"] + pub me_mapsize: usize, + #[doc = "< ID of the last used page"] + pub me_last_pgno: usize, + #[doc = "< ID of the last committed transaction"] + pub me_last_txnid: usize, + #[doc = "< max reader slots in the environment"] + pub me_maxreaders: ::libc::c_uint, + #[doc = "< max reader slots used in the environment"] + pub me_numreaders: ::libc::c_uint, +} +extern "C" { + #[doc = " @brief Return the LMDB library version information."] + #[doc = ""] + #[doc = " @param[out] major if non-NULL, the library major version number is copied here"] + #[doc = " @param[out] minor if non-NULL, the library minor version number is copied here"] + #[doc = " @param[out] patch if non-NULL, the library patch version number is copied here"] + #[doc = " @retval \"version string\" The library version as a string"] + pub fn mdb_version( + major: *mut ::libc::c_int, + minor: *mut ::libc::c_int, + patch: *mut ::libc::c_int, + ) -> *mut ::libc::c_char; +} +extern "C" { + #[doc = " @brief Return a string describing a given error code."] + #[doc = ""] + #[doc = " This function is a superset of the ANSI C X3.159-1989 (ANSI C) strerror(3)"] + #[doc = " function. If the error code is greater than or equal to 0, then the string"] + #[doc = " returned by the system function strerror(3) is returned. If the error code"] + #[doc = " is less than 0, an error string corresponding to the LMDB library error is"] + #[doc = " returned. See @ref errors for a list of LMDB-specific error codes."] + #[doc = " @param[in] err The error code"] + #[doc = " @retval \"error message\" The description of the error"] + pub fn mdb_strerror(err: ::libc::c_int) -> *mut ::libc::c_char; +} +extern "C" { + #[doc = " @brief Create an LMDB environment handle."] + #[doc = ""] + #[doc = " This function allocates memory for a #MDB_env structure. To release"] + #[doc = " the allocated memory and discard the handle, call #mdb_env_close()."] + #[doc = " Before the handle may be used, it must be opened using #mdb_env_open()."] + #[doc = " Various other options may also need to be set before opening the handle,"] + #[doc = " e.g. #mdb_env_set_mapsize(), #mdb_env_set_maxreaders(), #mdb_env_set_maxdbs(),"] + #[doc = " depending on usage requirements."] + #[doc = " @param[out] env The address where the new handle will be stored"] + #[doc = " @return A non-zero error value on failure and 0 on success."] + pub fn mdb_env_create(env: *mut *mut MDB_env) -> ::libc::c_int; +} +extern "C" { + #[doc = " @brief Open an environment handle."] + #[doc = ""] + #[doc = " If this function fails, #mdb_env_close() must be called to discard the #MDB_env handle."] + #[doc = " @param[in] env An environment handle returned by #mdb_env_create()"] + #[doc = " @param[in] path The directory in which the database files reside. This"] + #[doc = " directory must already exist and be writable."] + #[doc = " @param[in] flags Special options for this environment. This parameter"] + #[doc = " must be set to 0 or by bitwise OR'ing together one or more of the"] + #[doc = " values described here."] + #[doc = " Flags set by mdb_env_set_flags() are also used."] + #[doc = " "] + #[doc = " @param[in] mode The UNIX permissions to set on created files and semaphores."] + #[doc = " This parameter is ignored on Windows."] + #[doc = " @return A non-zero error value on failure and 0 on success. Some possible"] + #[doc = " errors are:"] + #[doc = " "] + pub fn mdb_env_open( + env: *mut MDB_env, + path: *const ::libc::c_char, + flags: ::libc::c_uint, + mode: mdb_mode_t, + ) -> ::libc::c_int; +} +extern "C" { + #[doc = " @brief Copy an LMDB environment to the specified path."] + #[doc = ""] + #[doc = " This function may be used to make a backup of an existing environment."] + #[doc = " No lockfile is created, since it gets recreated at need."] + #[doc = " @note This call can trigger significant file size growth if run in"] + #[doc = " parallel with write transactions, because it employs a read-only"] + #[doc = " transaction. See long-lived transactions under @ref caveats_sec."] + #[doc = " @param[in] env An environment handle returned by #mdb_env_create(). It"] + #[doc = " must have already been opened successfully."] + #[doc = " @param[in] path The directory in which the copy will reside. This"] + #[doc = " directory must already exist and be writable but must otherwise be"] + #[doc = " empty."] + #[doc = " @return A non-zero error value on failure and 0 on success."] + pub fn mdb_env_copy(env: *mut MDB_env, path: *const ::libc::c_char) -> ::libc::c_int; +} +extern "C" { + #[doc = " @brief Copy an LMDB environment to the specified file descriptor."] + #[doc = ""] + #[doc = " This function may be used to make a backup of an existing environment."] + #[doc = " No lockfile is created, since it gets recreated at need."] + #[doc = " @note This call can trigger significant file size growth if run in"] + #[doc = " parallel with write transactions, because it employs a read-only"] + #[doc = " transaction. See long-lived transactions under @ref caveats_sec."] + #[doc = " @param[in] env An environment handle returned by #mdb_env_create(). It"] + #[doc = " must have already been opened successfully."] + #[doc = " @param[in] fd The filedescriptor to write the copy to. It must"] + #[doc = " have already been opened for Write access."] + #[doc = " @return A non-zero error value on failure and 0 on success."] + pub fn mdb_env_copyfd(env: *mut MDB_env, fd: mdb_filehandle_t) -> ::libc::c_int; +} +extern "C" { + #[doc = " @brief Copy an LMDB environment to the specified path, with options."] + #[doc = ""] + #[doc = " This function may be used to make a backup of an existing environment."] + #[doc = " No lockfile is created, since it gets recreated at need."] + #[doc = " @note This call can trigger significant file size growth if run in"] + #[doc = " parallel with write transactions, because it employs a read-only"] + #[doc = " transaction. See long-lived transactions under @ref caveats_sec."] + #[doc = " @param[in] env An environment handle returned by #mdb_env_create(). It"] + #[doc = " must have already been opened successfully."] + #[doc = " @param[in] path The directory in which the copy will reside. This"] + #[doc = " directory must already exist and be writable but must otherwise be"] + #[doc = " empty."] + #[doc = " @param[in] flags Special options for this operation. This parameter"] + #[doc = " must be set to 0 or by bitwise OR'ing together one or more of the"] + #[doc = " values described here."] + #[doc = " "] + #[doc = " @return A non-zero error value on failure and 0 on success."] + pub fn mdb_env_copy2( + env: *mut MDB_env, + path: *const ::libc::c_char, + flags: ::libc::c_uint, + ) -> ::libc::c_int; +} +extern "C" { + #[doc = " @brief Copy an LMDB environment to the specified file descriptor,"] + #[doc = "\twith options."] + #[doc = ""] + #[doc = " This function may be used to make a backup of an existing environment."] + #[doc = " No lockfile is created, since it gets recreated at need. See"] + #[doc = " #mdb_env_copy2() for further details."] + #[doc = " @note This call can trigger significant file size growth if run in"] + #[doc = " parallel with write transactions, because it employs a read-only"] + #[doc = " transaction. See long-lived transactions under @ref caveats_sec."] + #[doc = " @param[in] env An environment handle returned by #mdb_env_create(). It"] + #[doc = " must have already been opened successfully."] + #[doc = " @param[in] fd The filedescriptor to write the copy to. It must"] + #[doc = " have already been opened for Write access."] + #[doc = " @param[in] flags Special options for this operation."] + #[doc = " See #mdb_env_copy2() for options."] + #[doc = " @return A non-zero error value on failure and 0 on success."] + pub fn mdb_env_copyfd2( + env: *mut MDB_env, + fd: mdb_filehandle_t, + flags: ::libc::c_uint, + ) -> ::libc::c_int; +} +extern "C" { + #[doc = " @brief Return statistics about the LMDB environment."] + #[doc = ""] + #[doc = " @param[in] env An environment handle returned by #mdb_env_create()"] + #[doc = " @param[out] stat The address of an #MDB_stat structure"] + #[doc = " \twhere the statistics will be copied"] + pub fn mdb_env_stat(env: *mut MDB_env, stat: *mut MDB_stat) -> ::libc::c_int; +} +extern "C" { + #[doc = " @brief Return information about the LMDB environment."] + #[doc = ""] + #[doc = " @param[in] env An environment handle returned by #mdb_env_create()"] + #[doc = " @param[out] stat The address of an #MDB_envinfo structure"] + #[doc = " \twhere the information will be copied"] + pub fn mdb_env_info(env: *mut MDB_env, stat: *mut MDB_envinfo) -> ::libc::c_int; +} +extern "C" { + #[doc = " @brief Flush the data buffers to disk."] + #[doc = ""] + #[doc = " Data is always written to disk when #mdb_txn_commit() is called,"] + #[doc = " but the operating system may keep it buffered. LMDB always flushes"] + #[doc = " the OS buffers upon commit as well, unless the environment was"] + #[doc = " opened with #MDB_NOSYNC or in part #MDB_NOMETASYNC. This call is"] + #[doc = " not valid if the environment was opened with #MDB_RDONLY."] + #[doc = " @param[in] env An environment handle returned by #mdb_env_create()"] + #[doc = " @param[in] force If non-zero, force a synchronous flush. Otherwise"] + #[doc = " if the environment has the #MDB_NOSYNC flag set the flushes"] + #[doc = "\twill be omitted, and with #MDB_MAPASYNC they will be asynchronous."] + #[doc = " @return A non-zero error value on failure and 0 on success. Some possible"] + #[doc = " errors are:"] + #[doc = " "] + pub fn mdb_env_sync(env: *mut MDB_env, force: ::libc::c_int) -> ::libc::c_int; +} +extern "C" { + #[doc = " @brief Close the environment and release the memory map."] + #[doc = ""] + #[doc = " Only a single thread may call this function. All transactions, databases,"] + #[doc = " and cursors must already be closed before calling this function. Attempts to"] + #[doc = " use any such handles after calling this function will cause a SIGSEGV."] + #[doc = " The environment handle will be freed and must not be used again after this call."] + #[doc = " @param[in] env An environment handle returned by #mdb_env_create()"] + pub fn mdb_env_close(env: *mut MDB_env); +} +extern "C" { + #[doc = " @brief Set environment flags."] + #[doc = ""] + #[doc = " This may be used to set some flags in addition to those from"] + #[doc = " #mdb_env_open(), or to unset these flags. If several threads"] + #[doc = " change the flags at the same time, the result is undefined."] + #[doc = " @param[in] env An environment handle returned by #mdb_env_create()"] + #[doc = " @param[in] flags The flags to change, bitwise OR'ed together"] + #[doc = " @param[in] onoff A non-zero value sets the flags, zero clears them."] + #[doc = " @return A non-zero error value on failure and 0 on success. Some possible"] + #[doc = " errors are:"] + #[doc = " "] + pub fn mdb_env_set_flags( + env: *mut MDB_env, + flags: ::libc::c_uint, + onoff: ::libc::c_int, + ) -> ::libc::c_int; +} +extern "C" { + #[doc = " @brief Get environment flags."] + #[doc = ""] + #[doc = " @param[in] env An environment handle returned by #mdb_env_create()"] + #[doc = " @param[out] flags The address of an integer to store the flags"] + #[doc = " @return A non-zero error value on failure and 0 on success. Some possible"] + #[doc = " errors are:"] + #[doc = " "] + pub fn mdb_env_get_flags(env: *mut MDB_env, flags: *mut ::libc::c_uint) -> ::libc::c_int; +} +extern "C" { + #[doc = " @brief Return the path that was used in #mdb_env_open()."] + #[doc = ""] + #[doc = " @param[in] env An environment handle returned by #mdb_env_create()"] + #[doc = " @param[out] path Address of a string pointer to contain the path. This"] + #[doc = " is the actual string in the environment, not a copy. It should not be"] + #[doc = " altered in any way."] + #[doc = " @return A non-zero error value on failure and 0 on success. Some possible"] + #[doc = " errors are:"] + #[doc = " "] + pub fn mdb_env_get_path(env: *mut MDB_env, path: *mut *const ::libc::c_char) -> ::libc::c_int; +} +extern "C" { + #[doc = " @brief Return the filedescriptor for the given environment."] + #[doc = ""] + #[doc = " This function may be called after fork(), so the descriptor can be"] + #[doc = " closed before exec*(). Other LMDB file descriptors have FD_CLOEXEC."] + #[doc = " (Until LMDB 0.9.18, only the lockfile had that.)"] + #[doc = ""] + #[doc = " @param[in] env An environment handle returned by #mdb_env_create()"] + #[doc = " @param[out] fd Address of a mdb_filehandle_t to contain the descriptor."] + #[doc = " @return A non-zero error value on failure and 0 on success. Some possible"] + #[doc = " errors are:"] + #[doc = " "] + pub fn mdb_env_get_fd(env: *mut MDB_env, fd: *mut mdb_filehandle_t) -> ::libc::c_int; +} +extern "C" { + #[doc = " @brief Set the size of the memory map to use for this environment."] + #[doc = ""] + #[doc = " The size should be a multiple of the OS page size. The default is"] + #[doc = " 10485760 bytes. The size of the memory map is also the maximum size"] + #[doc = " of the database. The value should be chosen as large as possible,"] + #[doc = " to accommodate future growth of the database."] + #[doc = " This function should be called after #mdb_env_create() and before #mdb_env_open()."] + #[doc = " It may be called at later times if no transactions are active in"] + #[doc = " this process. Note that the library does not check for this condition,"] + #[doc = " the caller must ensure it explicitly."] + #[doc = ""] + #[doc = " The new size takes effect immediately for the current process but"] + #[doc = " will not be persisted to any others until a write transaction has been"] + #[doc = " committed by the current process. Also, only mapsize increases are"] + #[doc = " persisted into the environment."] + #[doc = ""] + #[doc = " If the mapsize is increased by another process, and data has grown"] + #[doc = " beyond the range of the current mapsize, #mdb_txn_begin() will"] + #[doc = " return #MDB_MAP_RESIZED. This function may be called with a size"] + #[doc = " of zero to adopt the new size."] + #[doc = ""] + #[doc = " Any attempt to set a size smaller than the space already consumed"] + #[doc = " by the environment will be silently changed to the current size of the used space."] + #[doc = " @param[in] env An environment handle returned by #mdb_env_create()"] + #[doc = " @param[in] size The size in bytes"] + #[doc = " @return A non-zero error value on failure and 0 on success. Some possible"] + #[doc = " errors are:"] + #[doc = " "] + pub fn mdb_env_set_mapsize(env: *mut MDB_env, size: usize) -> ::libc::c_int; +} +extern "C" { + #[doc = " @brief Set the maximum number of threads/reader slots for the environment."] + #[doc = ""] + #[doc = " This defines the number of slots in the lock table that is used to track readers in the"] + #[doc = " the environment. The default is 126."] + #[doc = " Starting a read-only transaction normally ties a lock table slot to the"] + #[doc = " current thread until the environment closes or the thread exits. If"] + #[doc = " MDB_NOTLS is in use, #mdb_txn_begin() instead ties the slot to the"] + #[doc = " MDB_txn object until it or the #MDB_env object is destroyed."] + #[doc = " This function may only be called after #mdb_env_create() and before #mdb_env_open()."] + #[doc = " @param[in] env An environment handle returned by #mdb_env_create()"] + #[doc = " @param[in] readers The maximum number of reader lock table slots"] + #[doc = " @return A non-zero error value on failure and 0 on success. Some possible"] + #[doc = " errors are:"] + #[doc = " "] + pub fn mdb_env_set_maxreaders(env: *mut MDB_env, readers: ::libc::c_uint) -> ::libc::c_int; +} +extern "C" { + #[doc = " @brief Get the maximum number of threads/reader slots for the environment."] + #[doc = ""] + #[doc = " @param[in] env An environment handle returned by #mdb_env_create()"] + #[doc = " @param[out] readers Address of an integer to store the number of readers"] + #[doc = " @return A non-zero error value on failure and 0 on success. Some possible"] + #[doc = " errors are:"] + #[doc = " "] + pub fn mdb_env_get_maxreaders(env: *mut MDB_env, readers: *mut ::libc::c_uint) + -> ::libc::c_int; +} +extern "C" { + #[doc = " @brief Set the maximum number of named databases for the environment."] + #[doc = ""] + #[doc = " This function is only needed if multiple databases will be used in the"] + #[doc = " environment. Simpler applications that use the environment as a single"] + #[doc = " unnamed database can ignore this option."] + #[doc = " This function may only be called after #mdb_env_create() and before #mdb_env_open()."] + #[doc = ""] + #[doc = " Currently a moderate number of slots are cheap but a huge number gets"] + #[doc = " expensive: 7-120 words per transaction, and every #mdb_dbi_open()"] + #[doc = " does a linear search of the opened slots."] + #[doc = " @param[in] env An environment handle returned by #mdb_env_create()"] + #[doc = " @param[in] dbs The maximum number of databases"] + #[doc = " @return A non-zero error value on failure and 0 on success. Some possible"] + #[doc = " errors are:"] + #[doc = " "] + pub fn mdb_env_set_maxdbs(env: *mut MDB_env, dbs: MDB_dbi) -> ::libc::c_int; +} +extern "C" { + #[doc = " @brief Get the maximum size of keys and #MDB_DUPSORT data we can write."] + #[doc = ""] + #[doc = " Depends on the compile-time constant #MDB_MAXKEYSIZE. Default 511."] + #[doc = " See @ref MDB_val."] + #[doc = " @param[in] env An environment handle returned by #mdb_env_create()"] + #[doc = " @return The maximum size of a key we can write"] + pub fn mdb_env_get_maxkeysize(env: *mut MDB_env) -> ::libc::c_int; +} +extern "C" { + #[doc = " @brief Set application information associated with the #MDB_env."] + #[doc = ""] + #[doc = " @param[in] env An environment handle returned by #mdb_env_create()"] + #[doc = " @param[in] ctx An arbitrary pointer for whatever the application needs."] + #[doc = " @return A non-zero error value on failure and 0 on success."] + pub fn mdb_env_set_userctx(env: *mut MDB_env, ctx: *mut ::libc::c_void) -> ::libc::c_int; +} +extern "C" { + #[doc = " @brief Get the application information associated with the #MDB_env."] + #[doc = ""] + #[doc = " @param[in] env An environment handle returned by #mdb_env_create()"] + #[doc = " @return The pointer set by #mdb_env_set_userctx()."] + pub fn mdb_env_get_userctx(env: *mut MDB_env) -> *mut ::libc::c_void; +} +#[doc = " @brief A callback function for most LMDB assert() failures,"] +#[doc = " called before printing the message and aborting."] +#[doc = ""] +#[doc = " @param[in] env An environment handle returned by #mdb_env_create()."] +#[doc = " @param[in] msg The assertion message, not including newline."] +pub type MDB_assert_func = + ::std::option::Option; +extern "C" { + #[doc = " Set or reset the assert() callback of the environment."] + #[doc = " Disabled if liblmdb is buillt with NDEBUG."] + #[doc = " @note This hack should become obsolete as lmdb's error handling matures."] + #[doc = " @param[in] env An environment handle returned by #mdb_env_create()."] + #[doc = " @param[in] func An #MDB_assert_func function, or 0."] + #[doc = " @return A non-zero error value on failure and 0 on success."] + pub fn mdb_env_set_assert(env: *mut MDB_env, func: MDB_assert_func) -> ::libc::c_int; +} +extern "C" { + #[doc = " @brief Create a transaction for use with the environment."] + #[doc = ""] + #[doc = " The transaction handle may be discarded using #mdb_txn_abort() or #mdb_txn_commit()."] + #[doc = " @note A transaction and its cursors must only be used by a single"] + #[doc = " thread, and a thread may only have a single transaction at a time."] + #[doc = " If #MDB_NOTLS is in use, this does not apply to read-only transactions."] + #[doc = " @note Cursors may not span transactions."] + #[doc = " @param[in] env An environment handle returned by #mdb_env_create()"] + #[doc = " @param[in] parent If this parameter is non-NULL, the new transaction"] + #[doc = " will be a nested transaction, with the transaction indicated by \\b parent"] + #[doc = " as its parent. Transactions may be nested to any level. A parent"] + #[doc = " transaction and its cursors may not issue any other operations than"] + #[doc = " mdb_txn_commit and mdb_txn_abort while it has active child transactions."] + #[doc = " @param[in] flags Special options for this transaction. This parameter"] + #[doc = " must be set to 0 or by bitwise OR'ing together one or more of the"] + #[doc = " values described here."] + #[doc = "
    "] + #[doc = "\t
  • #MDB_RDONLY"] + #[doc = "\t\tThis transaction will not perform any write operations."] + #[doc = "
"] + #[doc = " @param[out] txn Address where the new #MDB_txn handle will be stored"] + #[doc = " @return A non-zero error value on failure and 0 on success. Some possible"] + #[doc = " errors are:"] + #[doc = "
    "] + #[doc = "\t
  • #MDB_PANIC - a fatal error occurred earlier and the environment"] + #[doc = "\t\tmust be shut down."] + #[doc = "\t
  • #MDB_MAP_RESIZED - another process wrote data beyond this MDB_env's"] + #[doc = "\t\tmapsize and this environment's map must be resized as well."] + #[doc = "\t\tSee #mdb_env_set_mapsize()."] + #[doc = "\t
  • #MDB_READERS_FULL - a read-only transaction was requested and"] + #[doc = "\t\tthe reader lock table is full. See #mdb_env_set_maxreaders()."] + #[doc = "\t
  • ENOMEM - out of memory."] + #[doc = "
"] + pub fn mdb_txn_begin( + env: *mut MDB_env, + parent: *mut MDB_txn, + flags: ::libc::c_uint, + txn: *mut *mut MDB_txn, + ) -> ::libc::c_int; +} +extern "C" { + #[doc = " @brief Returns the transaction's #MDB_env"] + #[doc = ""] + #[doc = " @param[in] txn A transaction handle returned by #mdb_txn_begin()"] + pub fn mdb_txn_env(txn: *mut MDB_txn) -> *mut MDB_env; +} +extern "C" { + #[doc = " @brief Return the transaction's ID."] + #[doc = ""] + #[doc = " This returns the identifier associated with this transaction. For a"] + #[doc = " read-only transaction, this corresponds to the snapshot being read;"] + #[doc = " concurrent readers will frequently have the same transaction ID."] + #[doc = ""] + #[doc = " @param[in] txn A transaction handle returned by #mdb_txn_begin()"] + #[doc = " @return A transaction ID, valid if input is an active transaction."] + pub fn mdb_txn_id(txn: *mut MDB_txn) -> usize; +} +extern "C" { + #[doc = " @brief Commit all the operations of a transaction into the database."] + #[doc = ""] + #[doc = " The transaction handle is freed. It and its cursors must not be used"] + #[doc = " again after this call, except with #mdb_cursor_renew()."] + #[doc = " @note Earlier documentation incorrectly said all cursors would be freed."] + #[doc = " Only write-transactions free cursors."] + #[doc = " @param[in] txn A transaction handle returned by #mdb_txn_begin()"] + #[doc = " @return A non-zero error value on failure and 0 on success. Some possible"] + #[doc = " errors are:"] + #[doc = "
    "] + #[doc = "\t
  • EINVAL - an invalid parameter was specified."] + #[doc = "\t
  • ENOSPC - no more disk space."] + #[doc = "\t
  • EIO - a low-level I/O error occurred while writing."] + #[doc = "\t
  • ENOMEM - out of memory."] + #[doc = "
"] + pub fn mdb_txn_commit(txn: *mut MDB_txn) -> ::libc::c_int; +} +extern "C" { + #[doc = " @brief Abandon all the operations of the transaction instead of saving them."] + #[doc = ""] + #[doc = " The transaction handle is freed. It and its cursors must not be used"] + #[doc = " again after this call, except with #mdb_cursor_renew()."] + #[doc = " @note Earlier documentation incorrectly said all cursors would be freed."] + #[doc = " Only write-transactions free cursors."] + #[doc = " @param[in] txn A transaction handle returned by #mdb_txn_begin()"] + pub fn mdb_txn_abort(txn: *mut MDB_txn); +} +extern "C" { + #[doc = " @brief Reset a read-only transaction."] + #[doc = ""] + #[doc = " Abort the transaction like #mdb_txn_abort(), but keep the transaction"] + #[doc = " handle. #mdb_txn_renew() may reuse the handle. This saves allocation"] + #[doc = " overhead if the process will start a new read-only transaction soon,"] + #[doc = " and also locking overhead if #MDB_NOTLS is in use. The reader table"] + #[doc = " lock is released, but the table slot stays tied to its thread or"] + #[doc = " #MDB_txn. Use mdb_txn_abort() to discard a reset handle, and to free"] + #[doc = " its lock table slot if MDB_NOTLS is in use."] + #[doc = " Cursors opened within the transaction must not be used"] + #[doc = " again after this call, except with #mdb_cursor_renew()."] + #[doc = " Reader locks generally don't interfere with writers, but they keep old"] + #[doc = " versions of database pages allocated. Thus they prevent the old pages"] + #[doc = " from being reused when writers commit new data, and so under heavy load"] + #[doc = " the database size may grow much more rapidly than otherwise."] + #[doc = " @param[in] txn A transaction handle returned by #mdb_txn_begin()"] + pub fn mdb_txn_reset(txn: *mut MDB_txn); +} +extern "C" { + #[doc = " @brief Renew a read-only transaction."] + #[doc = ""] + #[doc = " This acquires a new reader lock for a transaction handle that had been"] + #[doc = " released by #mdb_txn_reset(). It must be called before a reset transaction"] + #[doc = " may be used again."] + #[doc = " @param[in] txn A transaction handle returned by #mdb_txn_begin()"] + #[doc = " @return A non-zero error value on failure and 0 on success. Some possible"] + #[doc = " errors are:"] + #[doc = "
    "] + #[doc = "\t
  • #MDB_PANIC - a fatal error occurred earlier and the environment"] + #[doc = "\t\tmust be shut down."] + #[doc = "\t
  • EINVAL - an invalid parameter was specified."] + #[doc = "
"] + pub fn mdb_txn_renew(txn: *mut MDB_txn) -> ::libc::c_int; +} +extern "C" { + #[doc = " @brief Open a database in the environment."] + #[doc = ""] + #[doc = " A database handle denotes the name and parameters of a database,"] + #[doc = " independently of whether such a database exists."] + #[doc = " The database handle may be discarded by calling #mdb_dbi_close()."] + #[doc = " The old database handle is returned if the database was already open."] + #[doc = " The handle may only be closed once."] + #[doc = ""] + #[doc = " The database handle will be private to the current transaction until"] + #[doc = " the transaction is successfully committed. If the transaction is"] + #[doc = " aborted the handle will be closed automatically."] + #[doc = " After a successful commit the handle will reside in the shared"] + #[doc = " environment, and may be used by other transactions."] + #[doc = ""] + #[doc = " This function must not be called from multiple concurrent"] + #[doc = " transactions in the same process. A transaction that uses"] + #[doc = " this function must finish (either commit or abort) before"] + #[doc = " any other transaction in the process may use this function."] + #[doc = ""] + #[doc = " To use named databases (with name != NULL), #mdb_env_set_maxdbs()"] + #[doc = " must be called before opening the environment. Database names are"] + #[doc = " keys in the unnamed database, and may be read but not written."] + #[doc = ""] + #[doc = " @param[in] txn A transaction handle returned by #mdb_txn_begin()"] + #[doc = " @param[in] name The name of the database to open. If only a single"] + #[doc = " \tdatabase is needed in the environment, this value may be NULL."] + #[doc = " @param[in] flags Special options for this database. This parameter"] + #[doc = " must be set to 0 or by bitwise OR'ing together one or more of the"] + #[doc = " values described here."] + #[doc = "
    "] + #[doc = "\t
  • #MDB_REVERSEKEY"] + #[doc = "\t\tKeys are strings to be compared in reverse order, from the end"] + #[doc = "\t\tof the strings to the beginning. By default, Keys are treated as strings and"] + #[doc = "\t\tcompared from beginning to end."] + #[doc = "\t
  • #MDB_DUPSORT"] + #[doc = "\t\tDuplicate keys may be used in the database. (Or, from another perspective,"] + #[doc = "\t\tkeys may have multiple data items, stored in sorted order.) By default"] + #[doc = "\t\tkeys must be unique and may have only a single data item."] + #[doc = "\t
  • #MDB_INTEGERKEY"] + #[doc = "\t\tKeys are binary integers in native byte order, either unsigned int"] + #[doc = "\t\tor size_t, and will be sorted as such."] + #[doc = "\t\tThe keys must all be of the same size."] + #[doc = "\t
  • #MDB_DUPFIXED"] + #[doc = "\t\tThis flag may only be used in combination with #MDB_DUPSORT. This option"] + #[doc = "\t\ttells the library that the data items for this database are all the same"] + #[doc = "\t\tsize, which allows further optimizations in storage and retrieval. When"] + #[doc = "\t\tall data items are the same size, the #MDB_GET_MULTIPLE, #MDB_NEXT_MULTIPLE"] + #[doc = "\t\tand #MDB_PREV_MULTIPLE cursor operations may be used to retrieve multiple"] + #[doc = "\t\titems at once."] + #[doc = "\t
  • #MDB_INTEGERDUP"] + #[doc = "\t\tThis option specifies that duplicate data items are binary integers,"] + #[doc = "\t\tsimilar to #MDB_INTEGERKEY keys."] + #[doc = "\t
  • #MDB_REVERSEDUP"] + #[doc = "\t\tThis option specifies that duplicate data items should be compared as"] + #[doc = "\t\tstrings in reverse order."] + #[doc = "\t
  • #MDB_CREATE"] + #[doc = "\t\tCreate the named database if it doesn't exist. This option is not"] + #[doc = "\t\tallowed in a read-only transaction or a read-only environment."] + #[doc = "
"] + #[doc = " @param[out] dbi Address where the new #MDB_dbi handle will be stored"] + #[doc = " @return A non-zero error value on failure and 0 on success. Some possible"] + #[doc = " errors are:"] + #[doc = "
    "] + #[doc = "\t
  • #MDB_NOTFOUND - the specified database doesn't exist in the environment"] + #[doc = "\t\tand #MDB_CREATE was not specified."] + #[doc = "\t
  • #MDB_DBS_FULL - too many databases have been opened. See #mdb_env_set_maxdbs()."] + #[doc = "
"] + pub fn mdb_dbi_open( + txn: *mut MDB_txn, + name: *const ::libc::c_char, + flags: ::libc::c_uint, + dbi: *mut MDB_dbi, + ) -> ::libc::c_int; +} +extern "C" { + #[doc = " @brief Retrieve statistics for a database."] + #[doc = ""] + #[doc = " @param[in] txn A transaction handle returned by #mdb_txn_begin()"] + #[doc = " @param[in] dbi A database handle returned by #mdb_dbi_open()"] + #[doc = " @param[out] stat The address of an #MDB_stat structure"] + #[doc = " \twhere the statistics will be copied"] + #[doc = " @return A non-zero error value on failure and 0 on success. Some possible"] + #[doc = " errors are:"] + #[doc = "
    "] + #[doc = "\t
  • EINVAL - an invalid parameter was specified."] + #[doc = "
"] + pub fn mdb_stat(txn: *mut MDB_txn, dbi: MDB_dbi, stat: *mut MDB_stat) -> ::libc::c_int; +} +extern "C" { + #[doc = " @brief Retrieve the DB flags for a database handle."] + #[doc = ""] + #[doc = " @param[in] txn A transaction handle returned by #mdb_txn_begin()"] + #[doc = " @param[in] dbi A database handle returned by #mdb_dbi_open()"] + #[doc = " @param[out] flags Address where the flags will be returned."] + #[doc = " @return A non-zero error value on failure and 0 on success."] + pub fn mdb_dbi_flags( + txn: *mut MDB_txn, + dbi: MDB_dbi, + flags: *mut ::libc::c_uint, + ) -> ::libc::c_int; +} +extern "C" { + #[doc = " @brief Close a database handle. Normally unnecessary. Use with care:"] + #[doc = ""] + #[doc = " This call is not mutex protected. Handles should only be closed by"] + #[doc = " a single thread, and only if no other threads are going to reference"] + #[doc = " the database handle or one of its cursors any further. Do not close"] + #[doc = " a handle if an existing transaction has modified its database."] + #[doc = " Doing so can cause misbehavior from database corruption to errors"] + #[doc = " like MDB_BAD_VALSIZE (since the DB name is gone)."] + #[doc = ""] + #[doc = " Closing a database handle is not necessary, but lets #mdb_dbi_open()"] + #[doc = " reuse the handle value. Usually it's better to set a bigger"] + #[doc = " #mdb_env_set_maxdbs(), unless that value would be large."] + #[doc = ""] + #[doc = " @param[in] env An environment handle returned by #mdb_env_create()"] + #[doc = " @param[in] dbi A database handle returned by #mdb_dbi_open()"] + pub fn mdb_dbi_close(env: *mut MDB_env, dbi: MDB_dbi); +} +extern "C" { + #[doc = " @brief Empty or delete+close a database."] + #[doc = ""] + #[doc = " See #mdb_dbi_close() for restrictions about closing the DB handle."] + #[doc = " @param[in] txn A transaction handle returned by #mdb_txn_begin()"] + #[doc = " @param[in] dbi A database handle returned by #mdb_dbi_open()"] + #[doc = " @param[in] del 0 to empty the DB, 1 to delete it from the"] + #[doc = " environment and close the DB handle."] + #[doc = " @return A non-zero error value on failure and 0 on success."] + pub fn mdb_drop(txn: *mut MDB_txn, dbi: MDB_dbi, del: ::libc::c_int) -> ::libc::c_int; +} +extern "C" { + #[doc = " @brief Set a custom key comparison function for a database."] + #[doc = ""] + #[doc = " The comparison function is called whenever it is necessary to compare a"] + #[doc = " key specified by the application with a key currently stored in the database."] + #[doc = " If no comparison function is specified, and no special key flags were specified"] + #[doc = " with #mdb_dbi_open(), the keys are compared lexically, with shorter keys collating"] + #[doc = " before longer keys."] + #[doc = " @warning This function must be called before any data access functions are used,"] + #[doc = " otherwise data corruption may occur. The same comparison function must be used by every"] + #[doc = " program accessing the database, every time the database is used."] + #[doc = " @param[in] txn A transaction handle returned by #mdb_txn_begin()"] + #[doc = " @param[in] dbi A database handle returned by #mdb_dbi_open()"] + #[doc = " @param[in] cmp A #MDB_cmp_func function"] + #[doc = " @return A non-zero error value on failure and 0 on success. Some possible"] + #[doc = " errors are:"] + #[doc = "
    "] + #[doc = "\t
  • EINVAL - an invalid parameter was specified."] + #[doc = "
"] + pub fn mdb_set_compare(txn: *mut MDB_txn, dbi: MDB_dbi, cmp: MDB_cmp_func) -> ::libc::c_int; +} +extern "C" { + #[doc = " @brief Set a custom data comparison function for a #MDB_DUPSORT database."] + #[doc = ""] + #[doc = " This comparison function is called whenever it is necessary to compare a data"] + #[doc = " item specified by the application with a data item currently stored in the database."] + #[doc = " This function only takes effect if the database was opened with the #MDB_DUPSORT"] + #[doc = " flag."] + #[doc = " If no comparison function is specified, and no special key flags were specified"] + #[doc = " with #mdb_dbi_open(), the data items are compared lexically, with shorter items collating"] + #[doc = " before longer items."] + #[doc = " @warning This function must be called before any data access functions are used,"] + #[doc = " otherwise data corruption may occur. The same comparison function must be used by every"] + #[doc = " program accessing the database, every time the database is used."] + #[doc = " @param[in] txn A transaction handle returned by #mdb_txn_begin()"] + #[doc = " @param[in] dbi A database handle returned by #mdb_dbi_open()"] + #[doc = " @param[in] cmp A #MDB_cmp_func function"] + #[doc = " @return A non-zero error value on failure and 0 on success. Some possible"] + #[doc = " errors are:"] + #[doc = "
    "] + #[doc = "\t
  • EINVAL - an invalid parameter was specified."] + #[doc = "
"] + pub fn mdb_set_dupsort(txn: *mut MDB_txn, dbi: MDB_dbi, cmp: MDB_cmp_func) -> ::libc::c_int; +} +extern "C" { + #[doc = " @brief Set a relocation function for a #MDB_FIXEDMAP database."] + #[doc = ""] + #[doc = " @todo The relocation function is called whenever it is necessary to move the data"] + #[doc = " of an item to a different position in the database (e.g. through tree"] + #[doc = " balancing operations, shifts as a result of adds or deletes, etc.). It is"] + #[doc = " intended to allow address/position-dependent data items to be stored in"] + #[doc = " a database in an environment opened with the #MDB_FIXEDMAP option."] + #[doc = " Currently the relocation feature is unimplemented and setting"] + #[doc = " this function has no effect."] + #[doc = " @param[in] txn A transaction handle returned by #mdb_txn_begin()"] + #[doc = " @param[in] dbi A database handle returned by #mdb_dbi_open()"] + #[doc = " @param[in] rel A #MDB_rel_func function"] + #[doc = " @return A non-zero error value on failure and 0 on success. Some possible"] + #[doc = " errors are:"] + #[doc = "
    "] + #[doc = "\t
  • EINVAL - an invalid parameter was specified."] + #[doc = "
"] + pub fn mdb_set_relfunc(txn: *mut MDB_txn, dbi: MDB_dbi, rel: MDB_rel_func) -> ::libc::c_int; +} +extern "C" { + #[doc = " @brief Set a context pointer for a #MDB_FIXEDMAP database's relocation function."] + #[doc = ""] + #[doc = " See #mdb_set_relfunc and #MDB_rel_func for more details."] + #[doc = " @param[in] txn A transaction handle returned by #mdb_txn_begin()"] + #[doc = " @param[in] dbi A database handle returned by #mdb_dbi_open()"] + #[doc = " @param[in] ctx An arbitrary pointer for whatever the application needs."] + #[doc = " It will be passed to the callback function set by #mdb_set_relfunc"] + #[doc = " as its \\b relctx parameter whenever the callback is invoked."] + #[doc = " @return A non-zero error value on failure and 0 on success. Some possible"] + #[doc = " errors are:"] + #[doc = "
    "] + #[doc = "\t
  • EINVAL - an invalid parameter was specified."] + #[doc = "
"] + pub fn mdb_set_relctx( + txn: *mut MDB_txn, + dbi: MDB_dbi, + ctx: *mut ::libc::c_void, + ) -> ::libc::c_int; +} +extern "C" { + #[doc = " @brief Get items from a database."] + #[doc = ""] + #[doc = " This function retrieves key/data pairs from the database. The address"] + #[doc = " and length of the data associated with the specified \\b key are returned"] + #[doc = " in the structure to which \\b data refers."] + #[doc = " If the database supports duplicate keys (#MDB_DUPSORT) then the"] + #[doc = " first data item for the key will be returned. Retrieval of other"] + #[doc = " items requires the use of #mdb_cursor_get()."] + #[doc = ""] + #[doc = " @note The memory pointed to by the returned values is owned by the"] + #[doc = " database. The caller need not dispose of the memory, and may not"] + #[doc = " modify it in any way. For values returned in a read-only transaction"] + #[doc = " any modification attempts will cause a SIGSEGV."] + #[doc = " @note Values returned from the database are valid only until a"] + #[doc = " subsequent update operation, or the end of the transaction."] + #[doc = " @param[in] txn A transaction handle returned by #mdb_txn_begin()"] + #[doc = " @param[in] dbi A database handle returned by #mdb_dbi_open()"] + #[doc = " @param[in] key The key to search for in the database"] + #[doc = " @param[out] data The data corresponding to the key"] + #[doc = " @return A non-zero error value on failure and 0 on success. Some possible"] + #[doc = " errors are:"] + #[doc = "
    "] + #[doc = "\t
  • #MDB_NOTFOUND - the key was not in the database."] + #[doc = "\t
  • EINVAL - an invalid parameter was specified."] + #[doc = "
"] + pub fn mdb_get( + txn: *mut MDB_txn, + dbi: MDB_dbi, + key: *mut MDB_val, + data: *mut MDB_val, + ) -> ::libc::c_int; +} +extern "C" { + #[doc = " @brief Store items into a database."] + #[doc = ""] + #[doc = " This function stores key/data pairs in the database. The default behavior"] + #[doc = " is to enter the new key/data pair, replacing any previously existing key"] + #[doc = " if duplicates are disallowed, or adding a duplicate data item if"] + #[doc = " duplicates are allowed (#MDB_DUPSORT)."] + #[doc = " @param[in] txn A transaction handle returned by #mdb_txn_begin()"] + #[doc = " @param[in] dbi A database handle returned by #mdb_dbi_open()"] + #[doc = " @param[in] key The key to store in the database"] + #[doc = " @param[in,out] data The data to store"] + #[doc = " @param[in] flags Special options for this operation. This parameter"] + #[doc = " must be set to 0 or by bitwise OR'ing together one or more of the"] + #[doc = " values described here."] + #[doc = "
    "] + #[doc = "\t
  • #MDB_NODUPDATA - enter the new key/data pair only if it does not"] + #[doc = "\t\talready appear in the database. This flag may only be specified"] + #[doc = "\t\tif the database was opened with #MDB_DUPSORT. The function will"] + #[doc = "\t\treturn #MDB_KEYEXIST if the key/data pair already appears in the"] + #[doc = "\t\tdatabase."] + #[doc = "\t
  • #MDB_NOOVERWRITE - enter the new key/data pair only if the key"] + #[doc = "\t\tdoes not already appear in the database. The function will return"] + #[doc = "\t\t#MDB_KEYEXIST if the key already appears in the database, even if"] + #[doc = "\t\tthe database supports duplicates (#MDB_DUPSORT). The \\b data"] + #[doc = "\t\tparameter will be set to point to the existing item."] + #[doc = "\t
  • #MDB_RESERVE - reserve space for data of the given size, but"] + #[doc = "\t\tdon't copy the given data. Instead, return a pointer to the"] + #[doc = "\t\treserved space, which the caller can fill in later - before"] + #[doc = "\t\tthe next update operation or the transaction ends. This saves"] + #[doc = "\t\tan extra memcpy if the data is being generated later."] + #[doc = "\t\tLMDB does nothing else with this memory, the caller is expected"] + #[doc = "\t\tto modify all of the space requested. This flag must not be"] + #[doc = "\t\tspecified if the database was opened with #MDB_DUPSORT."] + #[doc = "\t
  • #MDB_APPEND - append the given key/data pair to the end of the"] + #[doc = "\t\tdatabase. This option allows fast bulk loading when keys are"] + #[doc = "\t\talready known to be in the correct order. Loading unsorted keys"] + #[doc = "\t\twith this flag will cause a #MDB_KEYEXIST error."] + #[doc = "\t
  • #MDB_APPENDDUP - as above, but for sorted dup data."] + #[doc = "
"] + #[doc = " @return A non-zero error value on failure and 0 on success. Some possible"] + #[doc = " errors are:"] + #[doc = "
    "] + #[doc = "\t
  • #MDB_MAP_FULL - the database is full, see #mdb_env_set_mapsize()."] + #[doc = "\t
  • #MDB_TXN_FULL - the transaction has too many dirty pages."] + #[doc = "\t
  • EACCES - an attempt was made to write in a read-only transaction."] + #[doc = "\t
  • EINVAL - an invalid parameter was specified."] + #[doc = "
"] + pub fn mdb_put( + txn: *mut MDB_txn, + dbi: MDB_dbi, + key: *mut MDB_val, + data: *mut MDB_val, + flags: ::libc::c_uint, + ) -> ::libc::c_int; +} +extern "C" { + #[doc = " @brief Delete items from a database."] + #[doc = ""] + #[doc = " This function removes key/data pairs from the database."] + #[doc = " If the database does not support sorted duplicate data items"] + #[doc = " (#MDB_DUPSORT) the data parameter is ignored."] + #[doc = " If the database supports sorted duplicates and the data parameter"] + #[doc = " is NULL, all of the duplicate data items for the key will be"] + #[doc = " deleted. Otherwise, if the data parameter is non-NULL"] + #[doc = " only the matching data item will be deleted."] + #[doc = " This function will return #MDB_NOTFOUND if the specified key/data"] + #[doc = " pair is not in the database."] + #[doc = " @param[in] txn A transaction handle returned by #mdb_txn_begin()"] + #[doc = " @param[in] dbi A database handle returned by #mdb_dbi_open()"] + #[doc = " @param[in] key The key to delete from the database"] + #[doc = " @param[in] data The data to delete"] + #[doc = " @return A non-zero error value on failure and 0 on success. Some possible"] + #[doc = " errors are:"] + #[doc = "
    "] + #[doc = "\t
  • EACCES - an attempt was made to write in a read-only transaction."] + #[doc = "\t
  • EINVAL - an invalid parameter was specified."] + #[doc = "
"] + pub fn mdb_del( + txn: *mut MDB_txn, + dbi: MDB_dbi, + key: *mut MDB_val, + data: *mut MDB_val, + ) -> ::libc::c_int; +} +extern "C" { + #[doc = " @brief Create a cursor handle."] + #[doc = ""] + #[doc = " A cursor is associated with a specific transaction and database."] + #[doc = " A cursor cannot be used when its database handle is closed. Nor"] + #[doc = " when its transaction has ended, except with #mdb_cursor_renew()."] + #[doc = " It can be discarded with #mdb_cursor_close()."] + #[doc = " A cursor in a write-transaction can be closed before its transaction"] + #[doc = " ends, and will otherwise be closed when its transaction ends."] + #[doc = " A cursor in a read-only transaction must be closed explicitly, before"] + #[doc = " or after its transaction ends. It can be reused with"] + #[doc = " #mdb_cursor_renew() before finally closing it."] + #[doc = " @note Earlier documentation said that cursors in every transaction"] + #[doc = " were closed when the transaction committed or aborted."] + #[doc = " @param[in] txn A transaction handle returned by #mdb_txn_begin()"] + #[doc = " @param[in] dbi A database handle returned by #mdb_dbi_open()"] + #[doc = " @param[out] cursor Address where the new #MDB_cursor handle will be stored"] + #[doc = " @return A non-zero error value on failure and 0 on success. Some possible"] + #[doc = " errors are:"] + #[doc = "
    "] + #[doc = "\t
  • EINVAL - an invalid parameter was specified."] + #[doc = "
"] + pub fn mdb_cursor_open( + txn: *mut MDB_txn, + dbi: MDB_dbi, + cursor: *mut *mut MDB_cursor, + ) -> ::libc::c_int; +} +extern "C" { + #[doc = " @brief Close a cursor handle."] + #[doc = ""] + #[doc = " The cursor handle will be freed and must not be used again after this call."] + #[doc = " Its transaction must still be live if it is a write-transaction."] + #[doc = " @param[in] cursor A cursor handle returned by #mdb_cursor_open()"] + pub fn mdb_cursor_close(cursor: *mut MDB_cursor); +} +extern "C" { + #[doc = " @brief Renew a cursor handle."] + #[doc = ""] + #[doc = " A cursor is associated with a specific transaction and database."] + #[doc = " Cursors that are only used in read-only"] + #[doc = " transactions may be re-used, to avoid unnecessary malloc/free overhead."] + #[doc = " The cursor may be associated with a new read-only transaction, and"] + #[doc = " referencing the same database handle as it was created with."] + #[doc = " This may be done whether the previous transaction is live or dead."] + #[doc = " @param[in] txn A transaction handle returned by #mdb_txn_begin()"] + #[doc = " @param[in] cursor A cursor handle returned by #mdb_cursor_open()"] + #[doc = " @return A non-zero error value on failure and 0 on success. Some possible"] + #[doc = " errors are:"] + #[doc = "
    "] + #[doc = "\t
  • EINVAL - an invalid parameter was specified."] + #[doc = "
"] + pub fn mdb_cursor_renew(txn: *mut MDB_txn, cursor: *mut MDB_cursor) -> ::libc::c_int; +} +extern "C" { + #[doc = " @brief Return the cursor's transaction handle."] + #[doc = ""] + #[doc = " @param[in] cursor A cursor handle returned by #mdb_cursor_open()"] + pub fn mdb_cursor_txn(cursor: *mut MDB_cursor) -> *mut MDB_txn; +} +extern "C" { + #[doc = " @brief Return the cursor's database handle."] + #[doc = ""] + #[doc = " @param[in] cursor A cursor handle returned by #mdb_cursor_open()"] + pub fn mdb_cursor_dbi(cursor: *mut MDB_cursor) -> MDB_dbi; +} +extern "C" { + #[doc = " @brief Retrieve by cursor."] + #[doc = ""] + #[doc = " This function retrieves key/data pairs from the database. The address and length"] + #[doc = " of the key are returned in the object to which \\b key refers (except for the"] + #[doc = " case of the #MDB_SET option, in which the \\b key object is unchanged), and"] + #[doc = " the address and length of the data are returned in the object to which \\b data"] + #[doc = " refers."] + #[doc = " See #mdb_get() for restrictions on using the output values."] + #[doc = " @param[in] cursor A cursor handle returned by #mdb_cursor_open()"] + #[doc = " @param[in,out] key The key for a retrieved item"] + #[doc = " @param[in,out] data The data of a retrieved item"] + #[doc = " @param[in] op A cursor operation #MDB_cursor_op"] + #[doc = " @return A non-zero error value on failure and 0 on success. Some possible"] + #[doc = " errors are:"] + #[doc = "
    "] + #[doc = "\t
  • #MDB_NOTFOUND - no matching key found."] + #[doc = "\t
  • EINVAL - an invalid parameter was specified."] + #[doc = "
"] + pub fn mdb_cursor_get( + cursor: *mut MDB_cursor, + key: *mut MDB_val, + data: *mut MDB_val, + op: MDB_cursor_op, + ) -> ::libc::c_int; +} +extern "C" { + #[doc = " @brief Store by cursor."] + #[doc = ""] + #[doc = " This function stores key/data pairs into the database."] + #[doc = " The cursor is positioned at the new item, or on failure usually near it."] + #[doc = " @note Earlier documentation incorrectly said errors would leave the"] + #[doc = " state of the cursor unchanged."] + #[doc = " @param[in] cursor A cursor handle returned by #mdb_cursor_open()"] + #[doc = " @param[in] key The key operated on."] + #[doc = " @param[in] data The data operated on."] + #[doc = " @param[in] flags Options for this operation. This parameter"] + #[doc = " must be set to 0 or one of the values described here."] + #[doc = "
    "] + #[doc = "\t
  • #MDB_CURRENT - replace the item at the current cursor position."] + #[doc = "\t\tThe \\b key parameter must still be provided, and must match it."] + #[doc = "\t\tIf using sorted duplicates (#MDB_DUPSORT) the data item must still"] + #[doc = "\t\tsort into the same place. This is intended to be used when the"] + #[doc = "\t\tnew data is the same size as the old. Otherwise it will simply"] + #[doc = "\t\tperform a delete of the old record followed by an insert."] + #[doc = "\t
  • #MDB_NODUPDATA - enter the new key/data pair only if it does not"] + #[doc = "\t\talready appear in the database. This flag may only be specified"] + #[doc = "\t\tif the database was opened with #MDB_DUPSORT. The function will"] + #[doc = "\t\treturn #MDB_KEYEXIST if the key/data pair already appears in the"] + #[doc = "\t\tdatabase."] + #[doc = "\t
  • #MDB_NOOVERWRITE - enter the new key/data pair only if the key"] + #[doc = "\t\tdoes not already appear in the database. The function will return"] + #[doc = "\t\t#MDB_KEYEXIST if the key already appears in the database, even if"] + #[doc = "\t\tthe database supports duplicates (#MDB_DUPSORT)."] + #[doc = "\t
  • #MDB_RESERVE - reserve space for data of the given size, but"] + #[doc = "\t\tdon't copy the given data. Instead, return a pointer to the"] + #[doc = "\t\treserved space, which the caller can fill in later - before"] + #[doc = "\t\tthe next update operation or the transaction ends. This saves"] + #[doc = "\t\tan extra memcpy if the data is being generated later. This flag"] + #[doc = "\t\tmust not be specified if the database was opened with #MDB_DUPSORT."] + #[doc = "\t
  • #MDB_APPEND - append the given key/data pair to the end of the"] + #[doc = "\t\tdatabase. No key comparisons are performed. This option allows"] + #[doc = "\t\tfast bulk loading when keys are already known to be in the"] + #[doc = "\t\tcorrect order. Loading unsorted keys with this flag will cause"] + #[doc = "\t\ta #MDB_KEYEXIST error."] + #[doc = "\t
  • #MDB_APPENDDUP - as above, but for sorted dup data."] + #[doc = "\t
  • #MDB_MULTIPLE - store multiple contiguous data elements in a"] + #[doc = "\t\tsingle request. This flag may only be specified if the database"] + #[doc = "\t\twas opened with #MDB_DUPFIXED. The \\b data argument must be an"] + #[doc = "\t\tarray of two MDB_vals. The mv_size of the first MDB_val must be"] + #[doc = "\t\tthe size of a single data element. The mv_data of the first MDB_val"] + #[doc = "\t\tmust point to the beginning of the array of contiguous data elements."] + #[doc = "\t\tThe mv_size of the second MDB_val must be the count of the number"] + #[doc = "\t\tof data elements to store. On return this field will be set to"] + #[doc = "\t\tthe count of the number of elements actually written. The mv_data"] + #[doc = "\t\tof the second MDB_val is unused."] + #[doc = "
"] + #[doc = " @return A non-zero error value on failure and 0 on success. Some possible"] + #[doc = " errors are:"] + #[doc = "
    "] + #[doc = "\t
  • #MDB_MAP_FULL - the database is full, see #mdb_env_set_mapsize()."] + #[doc = "\t
  • #MDB_TXN_FULL - the transaction has too many dirty pages."] + #[doc = "\t
  • EACCES - an attempt was made to write in a read-only transaction."] + #[doc = "\t
  • EINVAL - an invalid parameter was specified."] + #[doc = "
"] + pub fn mdb_cursor_put( + cursor: *mut MDB_cursor, + key: *mut MDB_val, + data: *mut MDB_val, + flags: ::libc::c_uint, + ) -> ::libc::c_int; +} +extern "C" { + #[doc = " @brief Delete current key/data pair"] + #[doc = ""] + #[doc = " This function deletes the key/data pair to which the cursor refers."] + #[doc = " This does not invalidate the cursor, so operations such as MDB_NEXT"] + #[doc = " can still be used on it."] + #[doc = " Both MDB_NEXT and MDB_GET_CURRENT will return the same record after"] + #[doc = " this operation."] + #[doc = " @param[in] cursor A cursor handle returned by #mdb_cursor_open()"] + #[doc = " @param[in] flags Options for this operation. This parameter"] + #[doc = " must be set to 0 or one of the values described here."] + #[doc = "
    "] + #[doc = "\t
  • #MDB_NODUPDATA - delete all of the data items for the current key."] + #[doc = "\t\tThis flag may only be specified if the database was opened with #MDB_DUPSORT."] + #[doc = "
"] + #[doc = " @return A non-zero error value on failure and 0 on success. Some possible"] + #[doc = " errors are:"] + #[doc = "
    "] + #[doc = "\t
  • EACCES - an attempt was made to write in a read-only transaction."] + #[doc = "\t
  • EINVAL - an invalid parameter was specified."] + #[doc = "
"] + pub fn mdb_cursor_del(cursor: *mut MDB_cursor, flags: ::libc::c_uint) -> ::libc::c_int; +} +extern "C" { + #[doc = " @brief Return count of duplicates for current key."] + #[doc = ""] + #[doc = " This call is only valid on databases that support sorted duplicate"] + #[doc = " data items #MDB_DUPSORT."] + #[doc = " @param[in] cursor A cursor handle returned by #mdb_cursor_open()"] + #[doc = " @param[out] countp Address where the count will be stored"] + #[doc = " @return A non-zero error value on failure and 0 on success. Some possible"] + #[doc = " errors are:"] + #[doc = "
    "] + #[doc = "\t
  • EINVAL - cursor is not initialized, or an invalid parameter was specified."] + #[doc = "
"] + pub fn mdb_cursor_count(cursor: *mut MDB_cursor, countp: *mut usize) -> ::libc::c_int; +} +extern "C" { + #[doc = " @brief Compare two data items according to a particular database."] + #[doc = ""] + #[doc = " This returns a comparison as if the two data items were keys in the"] + #[doc = " specified database."] + #[doc = " @param[in] txn A transaction handle returned by #mdb_txn_begin()"] + #[doc = " @param[in] dbi A database handle returned by #mdb_dbi_open()"] + #[doc = " @param[in] a The first item to compare"] + #[doc = " @param[in] b The second item to compare"] + #[doc = " @return < 0 if a < b, 0 if a == b, > 0 if a > b"] + pub fn mdb_cmp( + txn: *mut MDB_txn, + dbi: MDB_dbi, + a: *const MDB_val, + b: *const MDB_val, + ) -> ::libc::c_int; +} +extern "C" { + #[doc = " @brief Compare two data items according to a particular database."] + #[doc = ""] + #[doc = " This returns a comparison as if the two items were data items of"] + #[doc = " the specified database. The database must have the #MDB_DUPSORT flag."] + #[doc = " @param[in] txn A transaction handle returned by #mdb_txn_begin()"] + #[doc = " @param[in] dbi A database handle returned by #mdb_dbi_open()"] + #[doc = " @param[in] a The first item to compare"] + #[doc = " @param[in] b The second item to compare"] + #[doc = " @return < 0 if a < b, 0 if a == b, > 0 if a > b"] + pub fn mdb_dcmp( + txn: *mut MDB_txn, + dbi: MDB_dbi, + a: *const MDB_val, + b: *const MDB_val, + ) -> ::libc::c_int; +} +#[doc = " @brief A callback function used to print a message from the library."] +#[doc = ""] +#[doc = " @param[in] msg The string to be printed."] +#[doc = " @param[in] ctx An arbitrary context pointer for the callback."] +#[doc = " @return < 0 on failure, >= 0 on success."] +pub type MDB_msg_func = ::std::option::Option< + unsafe extern "C" fn(msg: *const ::libc::c_char, ctx: *mut ::libc::c_void) -> ::libc::c_int, +>; +extern "C" { + #[doc = " @brief Dump the entries in the reader lock table."] + #[doc = ""] + #[doc = " @param[in] env An environment handle returned by #mdb_env_create()"] + #[doc = " @param[in] func A #MDB_msg_func function"] + #[doc = " @param[in] ctx Anything the message function needs"] + #[doc = " @return < 0 on failure, >= 0 on success."] + pub fn mdb_reader_list( + env: *mut MDB_env, + func: MDB_msg_func, + ctx: *mut ::libc::c_void, + ) -> ::libc::c_int; +} +extern "C" { + #[doc = " @brief Check for stale entries in the reader lock table."] + #[doc = ""] + #[doc = " @param[in] env An environment handle returned by #mdb_env_create()"] + #[doc = " @param[out] dead Number of stale slots that were cleared"] + #[doc = " @return 0 on success, non-zero on failure."] + pub fn mdb_reader_check(env: *mut MDB_env, dead: *mut ::libc::c_int) -> ::libc::c_int; +} diff --git a/third_party/rust/lmdb-rkv-sys/src/lib.rs b/third_party/rust/lmdb-rkv-sys/src/lib.rs new file mode 100644 index 0000000000..22cb43a6bc --- /dev/null +++ b/third_party/rust/lmdb-rkv-sys/src/lib.rs @@ -0,0 +1,22 @@ +#![deny(warnings)] +#![allow(non_camel_case_types)] +#![allow(clippy::all)] +#![doc(html_root_url = "https://docs.rs/lmdb-rkv-sys/0.11.2")] + +extern crate libc; + +#[cfg(unix)] +#[allow(non_camel_case_types)] +pub type mdb_mode_t = ::libc::mode_t; +#[cfg(windows)] +#[allow(non_camel_case_types)] +pub type mdb_mode_t = ::libc::c_int; + +#[cfg(unix)] +#[allow(non_camel_case_types)] +pub type mdb_filehandle_t = ::libc::c_int; +#[cfg(windows)] +#[allow(non_camel_case_types)] +pub type mdb_filehandle_t = *mut ::libc::c_void; + +include!("bindings.rs"); -- cgit v1.2.3